[gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa

public inbox for gentoo-commits@lists.gentoo.org
 help / color / mirror / Atom feed

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2021-12-25 23:59 Quentin Retornaz
  0 siblings, 0 replies; 19+ messages in thread
From: Quentin Retornaz @ 2021-12-25 23:59 UTC (permalink / raw
  To: gentoo-commits

commit:     5bc78eece57a0be206680b59761cc860f48cf5fc
Author:     orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Sat Dec 25 22:19:41 2021 +0000
Commit:     Quentin Retornaz <gentoo <AT> retornaz <DOT> com>
CommitDate: Sat Dec 25 23:58:42 2021 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=5bc78eec

net-wireless/wpa_supplicant: Updated for 2.9-r8

Signed-off-by: orbea <orbea <AT> riseup.net>
Closes: https://github.com/gentoo/libressl/pull/374
Signed-off-by: Quentin Retornaz <gentoo <AT> retornaz.com>

 .../wpa_supplicant/wpa_supplicant-2.9-r8.ebuild    | 496 +++++++++++++++++++++
 1 file changed, 496 insertions(+)

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.9-r8.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.9-r8.ebuild
new file mode 100644
index 0000000..609b7c6
--- /dev/null
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.9-r8.ebuild
@@ -0,0 +1,496 @@
+# Copyright 1999-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit desktop linux-info qmake-utils readme.gentoo-r1 systemd toolchain-funcs
+
+DESCRIPTION="IEEE 802.1X/WPA supplicant for secure wireless transfers"
+HOMEPAGE="https://w1.fi/wpa_supplicant/"
+LICENSE="|| ( GPL-2 BSD )"
+
+if [ "${PV}" = "9999" ]; then
+	inherit git-r3
+	EGIT_REPO_URI="https://w1.fi/hostap.git"
+else
+	KEYWORDS="~alpha amd64 arm arm64 ~ia64 ~mips ppc ppc64 ~riscv ~sparc x86"
+	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
+	SRC_URI+=" https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${PN}-2.9-r3-patches.tar.bz2"
+fi
+
+SLOT="0"
+IUSE="ap +crda broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls uncommon-eap-types wimax wps kernel_linux kernel_FreeBSD"
+
+# CONFIG_PRIVSEP=y does not have sufficient support for the new driver
+# interface functions used for MACsec, so this combination cannot be used
+# at least for now.
+REQUIRED_USE="
+	macsec? ( !privsep )
+	privsep? ( !macsec )
+	broadcom-sta? ( !fils !mesh !mbo )
+"
+
+DEPEND="
+	>=dev-libs/openssl-1.0.2k:=
+	dbus? ( sys-apps/dbus )
+	kernel_linux? (
+		dev-libs/libnl:3
+		eap-sim? ( sys-apps/pcsc-lite )
+	)
+	!kernel_linux? ( net-libs/libpcap )
+	qt5? (
+		dev-qt/qtcore:5
+		dev-qt/qtgui:5
+		dev-qt/qtsvg:5
+		dev-qt/qtwidgets:5
+	)
+	readline? (
+		sys-libs/ncurses:0=
+		sys-libs/readline:0=
+	)
+"
+RDEPEND="${DEPEND}
+	selinux? ( sec-policy/selinux-networkmanager )
+	kernel_linux? (
+		net-wireless/wireless-regdb
+		crda? ( net-wireless/crda )
+	)
+"
+BDEPEND="virtual/pkgconfig"
+
+DOC_CONTENTS="
+	If this is a clean installation of wpa_supplicant, you
+	have to create a configuration file named
+	${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf
+	An example configuration file is available for reference in
+	${EROOT}/usr/share/doc/${PF}/
+"
+
+S="${WORKDIR}/${P}/${PN}"
+
+Kconfig_style_config() {
+		#param 1 is CONFIG_* item
+		#param 2 is what to set it = to, defaulting in y
+		CONFIG_PARAM="${CONFIG_HEADER:-CONFIG_}$1"
+		setting="${2:-y}"
+
+		if [ ! $setting = n ]; then
+			#first remove any leading "# " if $2 is not n
+			sed -i "/^# *$CONFIG_PARAM=/s/^# *//" .config || echo "Kconfig_style_config error uncommenting $CONFIG_PARAM"
+			#set item = $setting (defaulting to y)
+			sed -i "/^$CONFIG_PARAM/s/=.*/=$setting/" .config || echo "Kconfig_style_config error setting $CONFIG_PARAM=$setting"
+			if [ -z "$( grep ^$CONFIG_PARAM= .config )" ] ; then
+				echo "$CONFIG_PARAM=$setting" >>.config
+			fi
+		else
+			#ensure item commented out
+			sed -i "/^$CONFIG_PARAM/s/$CONFIG_PARAM/# $CONFIG_PARAM/" .config || echo "Kconfig_style_config error commenting $CONFIG_PARAM"
+		fi
+}
+
+pkg_pretend() {
+	CONFIG_CHECK=""
+
+	if use crda ; then
+		CONFIG_CHECK="${CONFIG_CHECK} ~CFG80211_CRDA_SUPPORT"
+		WARNING_CFG80211_CRDA_SUPPORT="REGULATORY DOMAIN PROBLEM: please enable CFG80211_CRDA_SUPPORT for proper regulatory domain support"
+	fi
+
+	check_extra_config
+
+	if ! use crda ; then
+		if linux_config_exists && linux_chkconfig_builtin CFG80211 &&
+			[[ $(linux_chkconfig_string EXTRA_FIRMWARE) != *regulatory.db* ]]
+		then
+			ewarn "REGULATORY DOMAIN PROBLEM:"
+			ewarn "With CONFIG_CFG80211=y (built-in), the driver won't be able to load regulatory.db from"
+			ewarn " /lib/firmware, resulting in broken regulatory domain support.  Please set CONFIG_CFG80211=m"
+			ewarn " or add regulatory.db and regulatory.db.p7s to CONFIG_EXTRA_FIRMWARE."
+		fi
+	fi
+}
+
+src_prepare() {
+	default
+
+	# net/bpf.h needed for net-libs/libpcap on Gentoo/FreeBSD
+	sed -i \
+		-e "s:\(#include <pcap\.h>\):#include <net/bpf.h>\n\1:" \
+		../src/l2_packet/l2_packet_freebsd.c || die
+
+	# People seem to take the example configuration file too literally (bug #102361)
+	sed -i \
+		-e "s:^\(opensc_engine_path\):#\1:" \
+		-e "s:^\(pkcs11_engine_path\):#\1:" \
+		-e "s:^\(pkcs11_module_path\):#\1:" \
+		wpa_supplicant.conf || die
+
+	# Change configuration to match Gentoo locations (bug #143750)
+	sed -i \
+		-e "s:/usr/lib/opensc:/usr/$(get_libdir):" \
+		-e "s:/usr/lib/pkcs11:/usr/$(get_libdir):" \
+		wpa_supplicant.conf || die
+
+	# systemd entries to D-Bus service files (bug #372877)
+	echo 'SystemdService=wpa_supplicant.service' \
+		| tee -a dbus/*.service >/dev/null || die
+
+	cd "${WORKDIR}/${P}" || die
+
+	if use wimax; then
+		# generate-libeap-peer.patch comes before
+		# fix-undefined-reference-to-random_get_bytes.patch
+		eapply "${FILESDIR}/${P}-generate-libeap-peer.patch"
+
+		# multilib-strict fix (bug #373685)
+		sed -e "s/\/usr\/lib/\/usr\/$(get_libdir)/" -i src/eap_peer/Makefile || die
+	fi
+
+	# bug (320097)
+	eapply "${FILESDIR}/${PN}-2.6-do-not-call-dbus-functions-with-NULL-path.patch"
+
+	# bug (640492)
+	sed -i 's#-Werror ##' wpa_supplicant/Makefile || die
+
+	## Security patches
+	# CVE-2019-16275 (bug #696030)
+	eapply "${FILESDIR}/wpa_supplicant-2.9-AP-Silently-ignore-management-frame-from-unexpected.patch"
+	# 2020-2, 2021-1 security advisories (bug #768759)
+	eapply "${WORKDIR}"/wpa_supplicant-2.9-r3-patches/security-{2020-2,2021-1}/*.patch
+	# CVE-2021-30004 (bug #780138)
+	eapply "${WORKDIR}"/wpa_supplicant-2.9-r3-patches/misc/CVE-2021-30004.patch
+	# libressl patch (https://github.com/gentoo/libressl/issues/336)
+	eapply "${FILESDIR}/${P}-libressl.patch"
+}
+
+src_configure() {
+	# Toolchain setup
+	tc-export CC PKG_CONFIG
+
+	cp defconfig .config || die
+
+	# Basic setup
+	Kconfig_style_config CTRL_IFACE
+	Kconfig_style_config MATCH_IFACE
+	Kconfig_style_config BACKEND file
+	Kconfig_style_config IBSS_RSN
+	Kconfig_style_config IEEE80211W
+	Kconfig_style_config IEEE80211R
+	Kconfig_style_config HT_OVERRIDES
+	Kconfig_style_config VHT_OVERRIDES
+	Kconfig_style_config OCV
+	Kconfig_style_config TLSV11
+	Kconfig_style_config TLSV12
+	Kconfig_style_config GETRANDOM
+
+	# Basic authentication methods
+	# NOTE: we don't set GPSK or SAKE as they conflict
+	# with the below options
+	Kconfig_style_config EAP_GTC
+	Kconfig_style_config EAP_MD5
+	Kconfig_style_config EAP_OTP
+	Kconfig_style_config EAP_PAX
+	Kconfig_style_config EAP_PSK
+	Kconfig_style_config EAP_TLV
+	Kconfig_style_config EAP_EXE
+	Kconfig_style_config IEEE8021X_EAPOL
+	Kconfig_style_config PKCS12
+	Kconfig_style_config PEERKEY
+	Kconfig_style_config EAP_LEAP
+	Kconfig_style_config EAP_MSCHAPV2
+	Kconfig_style_config EAP_PEAP
+	Kconfig_style_config EAP_TEAP
+	Kconfig_style_config EAP_TLS
+	Kconfig_style_config EAP_TTLS
+
+	# Enabling background scanning.
+	Kconfig_style_config BGSCAN_SIMPLE
+	Kconfig_style_config BGSCAN_LEARN
+
+	if use dbus ; then
+		Kconfig_style_config CTRL_IFACE_DBUS
+		Kconfig_style_config CTRL_IFACE_DBUS_NEW
+		Kconfig_style_config CTRL_IFACE_DBUS_INTRO
+	else
+		Kconfig_style_config CTRL_IFACE_DBUS n
+		Kconfig_style_config CTRL_IFACE_DBUS_NEW n
+		Kconfig_style_config CTRL_IFACE_DBUS_INTRO n
+	fi
+
+	if use eapol-test ; then
+		Kconfig_style_config EAPOL_TEST
+	fi
+
+	# Enable support for writing debug info to a log file and syslog.
+	Kconfig_style_config DEBUG_FILE
+	Kconfig_style_config DEBUG_SYSLOG
+
+	if use hs2-0 ; then
+		Kconfig_style_config INTERWORKING
+		Kconfig_style_config HS20
+	fi
+
+	if use mbo ; then
+		Kconfig_style_config MBO
+	else
+		Kconfig_style_config MBO n
+	fi
+
+	if use uncommon-eap-types; then
+		Kconfig_style_config EAP_GPSK
+		Kconfig_style_config EAP_SAKE
+		Kconfig_style_config EAP_GPSK_SHA256
+		Kconfig_style_config EAP_IKEV2
+		Kconfig_style_config EAP_EKE
+	fi
+
+	if use eap-sim ; then
+		# Smart card authentication
+		Kconfig_style_config EAP_SIM
+		Kconfig_style_config EAP_AKA
+		Kconfig_style_config EAP_AKA_PRIME
+		Kconfig_style_config PCSC
+	fi
+
+	if use fasteap ; then
+		Kconfig_style_config EAP_FAST
+	fi
+
+	if use readline ; then
+		# readline/history support for wpa_cli
+		Kconfig_style_config READLINE
+	else
+		#internal line edit mode for wpa_cli
+		Kconfig_style_config WPA_CLI_EDIT
+	fi
+
+	Kconfig_style_config TLS openssl
+	Kconfig_style_config FST
+
+	Kconfig_style_config EAP_PWD
+	if use fils; then
+		Kconfig_style_config FILS
+		Kconfig_style_config FILS_SK_PFS
+	fi
+	if use mesh; then
+		Kconfig_style_config MESH
+	else
+		Kconfig_style_config MESH n
+	fi
+	# WPA3
+	Kconfig_style_config OWE
+	Kconfig_style_config SAE
+	Kconfig_style_config DPP
+	Kconfig_style_config SUITEB192
+	Kconfig_style_config SUITEB
+
+	if use smartcard ; then
+		Kconfig_style_config SMARTCARD
+	else
+		Kconfig_style_config SMARTCARD n
+	fi
+
+	if use tdls ; then
+		Kconfig_style_config TDLS
+	fi
+
+	if use kernel_linux ; then
+		# Linux specific drivers
+		Kconfig_style_config DRIVER_ATMEL
+		Kconfig_style_config DRIVER_HOSTAP
+		Kconfig_style_config DRIVER_IPW
+		Kconfig_style_config DRIVER_NL80211
+		Kconfig_style_config DRIVER_RALINK
+		Kconfig_style_config DRIVER_WEXT
+		Kconfig_style_config DRIVER_WIRED
+
+		if use macsec ; then
+			#requires something, no idea what
+			#Kconfig_style_config DRIVER_MACSEC_QCA
+			Kconfig_style_config DRIVER_MACSEC_LINUX
+			Kconfig_style_config MACSEC
+		fi
+
+		if use ps3 ; then
+			Kconfig_style_config DRIVER_PS3
+		fi
+
+	elif use kernel_FreeBSD ; then
+		# FreeBSD specific driver
+		Kconfig_style_config DRIVER_BSD
+	fi
+
+	# Wi-Fi Protected Setup (WPS)
+	if use wps ; then
+		Kconfig_style_config WPS
+		Kconfig_style_config WPS2
+		# USB Flash Drive
+		Kconfig_style_config WPS_UFD
+		# External Registrar
+		Kconfig_style_config WPS_ER
+		# Universal Plug'n'Play
+		Kconfig_style_config WPS_UPNP
+		# Near Field Communication
+		Kconfig_style_config WPS_NFC
+	else
+		Kconfig_style_config WPS n
+		Kconfig_style_config WPS2 n
+		Kconfig_style_config WPS_UFD n
+		Kconfig_style_config WPS_ER n
+		Kconfig_style_config WPS_UPNP n
+		Kconfig_style_config WPS_NFC n
+	fi
+
+	# Wi-Fi Direct (WiDi)
+	if use p2p ; then
+		Kconfig_style_config P2P
+		Kconfig_style_config WIFI_DISPLAY
+	else
+		Kconfig_style_config P2P n
+		Kconfig_style_config WIFI_DISPLAY n
+	fi
+
+	# Access Point Mode
+	if use ap ; then
+		Kconfig_style_config AP
+	else
+		Kconfig_style_config AP n
+	fi
+
+	# Enable essentials for AP/P2P
+	if use ap || use p2p ; then
+		# Enabling HT support (802.11n)
+		Kconfig_style_config IEEE80211N
+
+		# Enabling VHT support (802.11ac)
+		Kconfig_style_config IEEE80211AC
+	fi
+
+	# Enable mitigation against certain attacks against TKIP
+	Kconfig_style_config DELAYED_MIC_ERROR_REPORT
+
+	if use privsep ; then
+		Kconfig_style_config PRIVSEP
+	fi
+
+	# If we are using libnl 2.0 and above, enable support for it
+	# Bug 382159
+	# Removed for now, since the 3.2 version is broken, and we don't
+	# support it.
+	if has_version ">=dev-libs/libnl-3.2"; then
+		Kconfig_style_config LIBNL32
+	fi
+
+	if use qt5 ; then
+		pushd "${S}"/wpa_gui-qt4 > /dev/null || die
+		eqmake5 wpa_gui.pro
+		popd > /dev/null || die
+	fi
+}
+
+src_compile() {
+	einfo "Building wpa_supplicant"
+	emake V=1 BINDIR=/usr/sbin
+
+	if use wimax; then
+		emake -C ../src/eap_peer clean
+		emake -C ../src/eap_peer
+	fi
+
+	if use qt5; then
+		einfo "Building wpa_gui"
+		emake -C "${S}"/wpa_gui-qt4
+	fi
+
+	if use eapol-test ; then
+		emake eapol_test
+	fi
+}
+
+src_install() {
+	dosbin wpa_supplicant
+	use privsep && dosbin wpa_priv
+	dobin wpa_cli wpa_passphrase
+
+	# baselayout-1 compat
+	if has_version "<sys-apps/baselayout-2.0.0"; then
+		dodir /sbin
+		dosym ../usr/sbin/wpa_supplicant /sbin/wpa_supplicant
+		dodir /bin
+		dosym ../usr/bin/wpa_cli /bin/wpa_cli
+	fi
+
+	if has_version ">=sys-apps/openrc-0.5.0"; then
+		newinitd "${FILESDIR}/${PN}-init.d" wpa_supplicant
+		newconfd "${FILESDIR}/${PN}-conf.d" wpa_supplicant
+	fi
+
+	exeinto /etc/wpa_supplicant/
+	newexe "${FILESDIR}/wpa_cli.sh" wpa_cli.sh
+
+	readme.gentoo_create_doc
+	dodoc ChangeLog {eap_testing,todo}.txt README{,-WPS} \
+		wpa_supplicant.conf
+
+	newdoc .config build-config
+
+	if [ "${PV}" != "9999" ]; then
+		doman doc/docbook/*.{5,8}
+	fi
+
+	if use qt5 ; then
+		into /usr
+		dobin wpa_gui-qt4/wpa_gui
+		doicon wpa_gui-qt4/icons/wpa_gui.svg
+		domenu wpa_gui-qt4/wpa_gui.desktop
+	else
+		rm "${ED}"/usr/share/man/man8/wpa_gui.8
+	fi
+
+	use wimax && emake DESTDIR="${D}" -C ../src/eap_peer install
+
+	if use dbus ; then
+		pushd "${S}"/dbus > /dev/null || die
+		insinto /etc/dbus-1/system.d
+		newins dbus-wpa_supplicant.conf wpa_supplicant.conf
+		insinto /usr/share/dbus-1/system-services
+		doins fi.w1.wpa_supplicant1.service
+		popd > /dev/null || die
+
+		# This unit relies on dbus support, bug 538600.
+		systemd_dounit systemd/wpa_supplicant.service
+	fi
+
+	if use eapol-test ; then
+		dobin eapol_test
+	fi
+
+	systemd_dounit "systemd/wpa_supplicant@.service"
+	systemd_dounit "systemd/wpa_supplicant-nl80211@.service"
+	systemd_dounit "systemd/wpa_supplicant-wired@.service"
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+
+	if [[ -e "${EROOT}"/etc/wpa_supplicant.conf ]] ; then
+		echo
+		ewarn "WARNING: your old configuration file ${EROOT}/etc/wpa_supplicant.conf"
+		ewarn "needs to be moved to ${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf"
+	fi
+
+	# Mea culpa, feel free to remove that after some time --mgorny.
+	local fn
+	for fn in wpa_supplicant{,@wlan0}.service; do
+		if [[ -e "${EROOT}"/etc/systemd/system/network.target.wants/${fn} ]]
+		then
+			ebegin "Moving ${fn} to multi-user.target"
+			mv "${EROOT}"/etc/systemd/system/network.target.wants/${fn} \
+				"${EROOT}"/etc/systemd/system/multi-user.target.wants/ || die
+			eend ${?} \
+				"Please try to re-enable ${fn}"
+		fi
+	done
+
+	systemd_reenable wpa_supplicant.service
+}


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2024-11-12 18:30 orbea
  0 siblings, 0 replies; 19+ messages in thread
From: orbea @ 2024-11-12 18:30 UTC (permalink / raw
  To: gentoo-commits

commit:     fa83d336b0ba9c16cec4e00a5c549ec75ab291c7
Author:     orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Tue Nov 12 18:27:19 2024 +0000
Commit:     orbea <orbea <AT> riseup <DOT> net>
CommitDate: Tue Nov 12 18:27:19 2024 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=fa83d336

net-wireless/wpa_supplicant: drop 2.10-r4

Signed-off-by: orbea <orbea <AT> riseup.net>

 .../wpa_supplicant/wpa_supplicant-2.10-r4.ebuild   | 480 ---------------------
 1 file changed, 480 deletions(-)

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild
deleted file mode 100644
index c56c16d..0000000
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild
+++ /dev/null
@@ -1,480 +0,0 @@
-# Copyright 1999-2024 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-inherit desktop linux-info qmake-utils readme.gentoo-r1 systemd toolchain-funcs
-
-DESCRIPTION="IEEE 802.1X/WPA supplicant for secure wireless transfers"
-HOMEPAGE="https://w1.fi/wpa_supplicant/"
-LICENSE="|| ( GPL-2 BSD )"
-
-if [ "${PV}" = "9999" ]; then
-	inherit git-r3
-	EGIT_REPO_URI="https://w1.fi/hostap.git"
-else
-	KEYWORDS="~alpha amd64 arm arm64 ~loong ~mips ppc ppc64 ~riscv ~sparc x86"
-	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
-fi
-
-SLOT="0"
-IUSE="ap broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls tkip uncommon-eap-types wep wimax wps"
-
-# CONFIG_PRIVSEP=y does not have sufficient support for the new driver
-# interface functions used for MACsec, so this combination cannot be used
-# at least for now. bug #684442
-REQUIRED_USE="
-	macsec? ( !privsep )
-	privsep? ( !macsec )
-	broadcom-sta? ( !fils !mesh !mbo )
-"
-
-DEPEND="
-	>=dev-libs/openssl-1.0.2k:=
-	dbus? ( sys-apps/dbus )
-	kernel_linux? (
-		>=dev-libs/libnl-3.2:3
-		eap-sim? ( sys-apps/pcsc-lite )
-	)
-	!kernel_linux? ( net-libs/libpcap )
-	qt5? (
-		dev-qt/qtcore:5
-		dev-qt/qtgui:5
-		dev-qt/qtsvg:5
-		dev-qt/qtwidgets:5
-	)
-	readline? (
-		sys-libs/ncurses:0=
-		sys-libs/readline:0=
-	)
-"
-RDEPEND="${DEPEND}
-	selinux? ( sec-policy/selinux-networkmanager )
-	kernel_linux? (
-		net-wireless/wireless-regdb
-	)
-"
-BDEPEND="virtual/pkgconfig"
-
-DOC_CONTENTS="
-	If this is a clean installation of wpa_supplicant, you
-	have to create a configuration file named
-	/etc/wpa_supplicant/wpa_supplicant.conf
-	An example configuration file is available for reference in
-	/usr/share/doc/${PF}/
-"
-
-S="${WORKDIR}/${P}/${PN}"
-
-Kconfig_style_config() {
-		#param 1 is CONFIG_* item
-		#param 2 is what to set it = to, defaulting in y
-		CONFIG_PARAM="${CONFIG_HEADER:-CONFIG_}$1"
-		setting="${2:-y}"
-
-		if [ ! $setting = n ]; then
-			#first remove any leading "# " if $2 is not n
-			sed -i "/^# *$CONFIG_PARAM=/s/^# *//" .config || echo "Kconfig_style_config error uncommenting $CONFIG_PARAM"
-			#set item = $setting (defaulting to y)
-			if ! sed -i "/^$CONFIG_PARAM\>/s/=.*/=$setting/" .config; then
-				echo "Kconfig_style_config error setting $CONFIG_PARAM=$setting"
-			fi
-			if [ -z "$( grep ^$CONFIG_PARAM= .config )" ] ; then
-				echo "$CONFIG_PARAM=$setting" >>.config
-			fi
-		else
-			#ensure item commented out
-			if ! sed -i "/^$CONFIG_PARAM\>/s/$CONFIG_PARAM/# $CONFIG_PARAM/" .config; then
-				echo "Kconfig_style_config error commenting $CONFIG_PARAM"
-			fi
-		fi
-}
-
-src_prepare() {
-	default
-
-	# net/bpf.h needed for net-libs/libpcap on Gentoo/FreeBSD
-	sed -i \
-		-e "s:\(#include <pcap\.h>\):#include <net/bpf.h>\n\1:" \
-		../src/l2_packet/l2_packet_freebsd.c || die
-
-	# Change configuration to match Gentoo locations (bug #143750)
-	sed -i \
-		-e "s:/usr/lib/opensc:/usr/$(get_libdir):" \
-		-e "s:/usr/lib/pkcs11:/usr/$(get_libdir):" \
-		wpa_supplicant.conf || die
-
-	# systemd entries to D-Bus service files (bug #372877)
-	echo 'SystemdService=wpa_supplicant.service' \
-		| tee -a dbus/*.service >/dev/null || die
-
-	cd "${WORKDIR}/${P}" || die
-
-	if use wimax; then
-		# generate-libeap-peer.patch comes before
-		# fix-undefined-reference-to-random_get_bytes.patch
-		eapply "${FILESDIR}/${P}-generate-libeap-peer.patch"
-
-		# multilib-strict fix (bug #373685)
-		sed -e "s/\/usr\/lib/\/usr\/$(get_libdir)/" -i src/eap_peer/Makefile || die
-	fi
-
-	# bug (320097)
-	eapply "${FILESDIR}/${PN}-2.6-do-not-call-dbus-functions-with-NULL-path.patch"
-
-	# bug (912315)
-	eapply "${FILESDIR}/${PN}-2.10-allow-legacy-renegotiation.patch"
-	eapply "${FILESDIR}/${PN}-2.10-Drop-security-level-to-0-with-OpenSSL-3.0-wh.patch"
-
-	# bug (640492)
-	sed -i 's#-Werror ##' wpa_supplicant/Makefile || die
-
-	# LibreSSL patch (https://github.com/gentoo/libressl/issues/336)
-	eapply "${FILESDIR}/${PN}-2.9-libressl.patch"
-}
-
-src_configure() {
-	# Toolchain setup
-	tc-export CC PKG_CONFIG
-
-	cp defconfig .config || die
-
-	# Basic setup
-	Kconfig_style_config CTRL_IFACE
-	Kconfig_style_config MATCH_IFACE
-	Kconfig_style_config BACKEND file
-	Kconfig_style_config IBSS_RSN
-	Kconfig_style_config IEEE80211W
-	Kconfig_style_config IEEE80211R
-	Kconfig_style_config HT_OVERRIDES
-	Kconfig_style_config VHT_OVERRIDES
-	Kconfig_style_config OCV
-	Kconfig_style_config TLSV11
-	Kconfig_style_config TLSV12
-	Kconfig_style_config GETRANDOM
-
-	# Basic authentication methods
-	# NOTE: we don't set GPSK or SAKE as they conflict
-	# with the below options
-	Kconfig_style_config EAP_GTC
-	Kconfig_style_config EAP_MD5
-	Kconfig_style_config EAP_OTP
-	Kconfig_style_config EAP_PAX
-	Kconfig_style_config EAP_PSK
-	Kconfig_style_config EAP_TLV
-	Kconfig_style_config EAP_EXE
-	Kconfig_style_config IEEE8021X_EAPOL
-	Kconfig_style_config PKCS12
-	Kconfig_style_config PEERKEY
-	Kconfig_style_config EAP_LEAP
-	Kconfig_style_config EAP_MSCHAPV2
-	Kconfig_style_config EAP_PEAP
-	Kconfig_style_config EAP_TEAP
-	Kconfig_style_config EAP_TLS
-	Kconfig_style_config EAP_TTLS
-
-	# Enabling background scanning.
-	Kconfig_style_config BGSCAN_SIMPLE
-	Kconfig_style_config BGSCAN_LEARN
-
-	if use dbus ; then
-		Kconfig_style_config CTRL_IFACE_DBUS
-		Kconfig_style_config CTRL_IFACE_DBUS_NEW
-		Kconfig_style_config CTRL_IFACE_DBUS_INTRO
-	else
-		Kconfig_style_config CTRL_IFACE_DBUS n
-		Kconfig_style_config CTRL_IFACE_DBUS_NEW n
-		Kconfig_style_config CTRL_IFACE_DBUS_INTRO n
-	fi
-
-	if use eapol-test ; then
-		Kconfig_style_config EAPOL_TEST
-	fi
-
-	# Enable support for writing debug info to a log file and syslog.
-	Kconfig_style_config DEBUG_FILE
-	Kconfig_style_config DEBUG_SYSLOG
-
-	if use hs2-0 ; then
-		Kconfig_style_config INTERWORKING
-		Kconfig_style_config HS20
-	fi
-
-	if use mbo ; then
-		Kconfig_style_config MBO
-	else
-		Kconfig_style_config MBO n
-	fi
-
-	if use uncommon-eap-types; then
-		Kconfig_style_config EAP_GPSK
-		Kconfig_style_config EAP_SAKE
-		Kconfig_style_config EAP_GPSK_SHA256
-		Kconfig_style_config EAP_IKEV2
-		Kconfig_style_config EAP_EKE
-	fi
-
-	if use eap-sim ; then
-		# Smart card authentication
-		Kconfig_style_config EAP_SIM
-		Kconfig_style_config EAP_AKA
-		Kconfig_style_config EAP_AKA_PRIME
-		Kconfig_style_config PCSC
-	fi
-
-	if use fasteap ; then
-		Kconfig_style_config EAP_FAST
-	fi
-
-	if use readline ; then
-		# readline/history support for wpa_cli
-		Kconfig_style_config READLINE
-	else
-		#internal line edit mode for wpa_cli
-		Kconfig_style_config WPA_CLI_EDIT
-	fi
-
-	Kconfig_style_config TLS openssl
-	Kconfig_style_config FST
-
-	Kconfig_style_config EAP_PWD
-	if use fils; then
-		Kconfig_style_config FILS
-		Kconfig_style_config FILS_SK_PFS
-	fi
-	if use mesh; then
-		Kconfig_style_config MESH
-	else
-		Kconfig_style_config MESH n
-	fi
-	# WPA3
-	Kconfig_style_config OWE
-	Kconfig_style_config SAE
-	Kconfig_style_config DPP
-	Kconfig_style_config DPP2
-	Kconfig_style_config SUITEB192
-	Kconfig_style_config SUITEB
-
-	if use wep ; then
-		Kconfig_style_config WEP
-	else
-		Kconfig_style_config WEP n
-	fi
-
-	# Watch out, reversed logic
-	if use tkip ; then
-		Kconfig_style_config NO_TKIP n
-	else
-		Kconfig_style_config NO_TKIP
-	fi
-
-	if use smartcard ; then
-		Kconfig_style_config SMARTCARD
-	else
-		Kconfig_style_config SMARTCARD n
-	fi
-
-	if use tdls ; then
-		Kconfig_style_config TDLS
-	fi
-
-	if use kernel_linux ; then
-		# Linux specific drivers
-		Kconfig_style_config DRIVER_ATMEL
-		Kconfig_style_config DRIVER_HOSTAP
-		Kconfig_style_config DRIVER_IPW
-		Kconfig_style_config DRIVER_NL80211
-		Kconfig_style_config DRIVER_RALINK
-		Kconfig_style_config DRIVER_WEXT
-		Kconfig_style_config DRIVER_WIRED
-
-		if use macsec ; then
-			#requires something, no idea what
-			#Kconfig_style_config DRIVER_MACSEC_QCA
-			Kconfig_style_config DRIVER_MACSEC_LINUX
-			Kconfig_style_config MACSEC
-		else
-			# bug #831369 and bug #684442
-			Kconfig_style_config DRIVER_MACSEC_LINUX n
-			Kconfig_style_config MACSEC n
-		fi
-
-		if use ps3 ; then
-			Kconfig_style_config DRIVER_PS3
-		fi
-	fi
-
-	# Wi-Fi Protected Setup (WPS)
-	if use wps ; then
-		Kconfig_style_config WPS
-		Kconfig_style_config WPS2
-		# USB Flash Drive
-		Kconfig_style_config WPS_UFD
-		# External Registrar
-		Kconfig_style_config WPS_ER
-		# Universal Plug'n'Play
-		Kconfig_style_config WPS_UPNP
-		# Near Field Communication
-		Kconfig_style_config WPS_NFC
-	else
-		Kconfig_style_config WPS n
-		Kconfig_style_config WPS2 n
-		Kconfig_style_config WPS_UFD n
-		Kconfig_style_config WPS_ER n
-		Kconfig_style_config WPS_UPNP n
-		Kconfig_style_config WPS_NFC n
-	fi
-
-	# Wi-Fi Direct (WiDi)
-	if use p2p ; then
-		Kconfig_style_config P2P
-		Kconfig_style_config WIFI_DISPLAY
-	else
-		Kconfig_style_config P2P n
-		Kconfig_style_config WIFI_DISPLAY n
-	fi
-
-	# Access Point Mode
-	if use ap ; then
-		Kconfig_style_config AP
-	else
-		Kconfig_style_config AP n
-	fi
-
-	# Enable essentials for AP/P2P
-	if use ap || use p2p ; then
-		# Enabling HT support (802.11n)
-		Kconfig_style_config IEEE80211N
-
-		# Enabling VHT support (802.11ac)
-		Kconfig_style_config IEEE80211AC
-	fi
-
-	# Enable mitigation against certain attacks against TKIP
-	Kconfig_style_config DELAYED_MIC_ERROR_REPORT
-
-	if use privsep ; then
-		Kconfig_style_config PRIVSEP
-	fi
-
-	if use kernel_linux ; then
-		Kconfig_style_config LIBNL32
-	fi
-
-	if use qt5 ; then
-		pushd "${S}"/wpa_gui-qt4 > /dev/null || die
-		eqmake5 wpa_gui.pro
-		popd > /dev/null || die
-	fi
-}
-
-src_compile() {
-	einfo "Building wpa_supplicant"
-	emake V=1 BINDIR=/usr/sbin
-
-	if use wimax; then
-		emake -C ../src/eap_peer clean
-		emake -C ../src/eap_peer
-	fi
-
-	if use qt5; then
-		einfo "Building wpa_gui"
-		emake -C "${S}"/wpa_gui-qt4
-	fi
-
-	if use eapol-test ; then
-		emake eapol_test
-	fi
-}
-
-src_install() {
-	dosbin wpa_supplicant
-	use privsep && dosbin wpa_priv
-	dobin wpa_cli wpa_passphrase
-
-	newinitd "${FILESDIR}/${PN}-init.d" wpa_supplicant
-	newconfd "${FILESDIR}/${PN}-conf.d" wpa_supplicant
-
-	exeinto /etc/wpa_supplicant/
-	newexe "${FILESDIR}/wpa_cli.sh" wpa_cli.sh
-
-	readme.gentoo_create_doc
-	dodoc ChangeLog {eap_testing,todo}.txt README{,-WPS} \
-		wpa_supplicant.conf
-
-	newdoc .config build-config
-
-	if [ "${PV}" != "9999" ]; then
-		doman doc/docbook/*.{5,8}
-	fi
-
-	if use qt5 ; then
-		into /usr
-		dobin wpa_gui-qt4/wpa_gui
-		doicon wpa_gui-qt4/icons/wpa_gui.svg
-		domenu wpa_gui-qt4/wpa_gui.desktop
-	else
-		rm "${ED}"/usr/share/man/man8/wpa_gui.8
-	fi
-
-	use wimax && emake DESTDIR="${D}" -C ../src/eap_peer install
-
-	if use dbus ; then
-		pushd "${S}"/dbus > /dev/null || die
-		insinto /etc/dbus-1/system.d
-		newins dbus-wpa_supplicant.conf wpa_supplicant.conf
-		insinto /usr/share/dbus-1/system-services
-		doins fi.w1.wpa_supplicant1.service
-		popd > /dev/null || die
-
-		# This unit relies on dbus support, bug 538600.
-		systemd_dounit systemd/wpa_supplicant.service
-	fi
-
-	if use eapol-test ; then
-		dobin eapol_test
-	fi
-
-	systemd_dounit "systemd/wpa_supplicant@.service"
-	systemd_dounit "systemd/wpa_supplicant-nl80211@.service"
-	systemd_dounit "systemd/wpa_supplicant-wired@.service"
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-
-	if [[ -e "${EROOT}"/etc/wpa_supplicant.conf ]] ; then
-		echo
-		ewarn "WARNING: your old configuration file ${EROOT}/etc/wpa_supplicant.conf"
-		ewarn "needs to be moved to ${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf"
-	fi
-	if ! use wep; then
-		einfo "WARNING: You are building with WEP support disabled, which is recommended since"
-		einfo "this protocol is deprecated and insecure.  If you still need to connect to"
-		einfo "WEP-enabled networks, you may turn this flag back on.  With this flag off,"
-		einfo "WEP-enabled networks will not even show up as available."
-		einfo "If your network is missing you may wish to USE=wep"
-	fi
-	if ! use tkip; then
-		ewarn "WARNING: You are building with TKIP support disabled, which is recommended since"
-		ewarn "this protocol is deprecated and insecure.  If you still need to connect to"
-		ewarn "TKIP-enabled networks, you may turn this flag back on.  With this flag off,"
-		ewarn "TKIP-enabled networks, including mixed mode TKIP/AES-CCMP will not even show up"
-		ewarn "as available.  If your network is missing you may wish to USE=tkip"
-	fi
-
-	# Mea culpa, feel free to remove that after some time --mgorny.
-	local fn
-	for fn in wpa_supplicant{,@wlan0}.service; do
-		if [[ -e "${EROOT}"/etc/systemd/system/network.target.wants/${fn} ]]
-		then
-			ebegin "Moving ${fn} to multi-user.target"
-			mv "${EROOT}"/etc/systemd/system/network.target.wants/${fn} \
-				"${EROOT}"/etc/systemd/system/multi-user.target.wants/ || die
-			eend ${?} \
-				"Please try to re-enable ${fn}"
-		fi
-	done
-
-	systemd_reenable wpa_supplicant.service
-}


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2024-10-30 16:29 orbea
  0 siblings, 0 replies; 19+ messages in thread
From: orbea @ 2024-10-30 16:29 UTC (permalink / raw
  To: gentoo-commits

commit:     6399dde8db398493235634ebc91df6b632dffc80
Author:     orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Wed Oct 30 16:28:31 2024 +0000
Commit:     orbea <orbea <AT> riseup <DOT> net>
CommitDate: Wed Oct 30 16:28:31 2024 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=6399dde8

net-wireless/wpa_supplicant: stabilize 2.10-r5 for arm, arm64

Signed-off-by: orbea <orbea <AT> riseup.net>

 net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild
index be693dc..2ba29cf 100644
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild
@@ -13,7 +13,7 @@ if [ "${PV}" = "9999" ]; then
 	inherit git-r3
 	EGIT_REPO_URI="https://w1.fi/hostap.git"
 else
-	KEYWORDS="~alpha amd64 ~arm ~arm64 ~loong ~mips ppc ppc64 ~riscv ~sparc x86"
+	KEYWORDS="~alpha amd64 arm arm64 ~loong ~mips ppc ppc64 ~riscv ~sparc x86"
 	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
 fi
 


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2024-09-26 23:12 orbea
  0 siblings, 0 replies; 19+ messages in thread
From: orbea @ 2024-09-26 23:12 UTC (permalink / raw
  To: gentoo-commits

commit:     7ca29acacc68d9c80f2b499eba3e3d1c73bb1555
Author:     orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Thu Sep 26 23:11:23 2024 +0000
Commit:     orbea <orbea <AT> riseup <DOT> net>
CommitDate: Thu Sep 26 23:11:23 2024 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=7ca29aca

net-wireless/wpa_supplicant: stabilize 2.10-r5 for amd64, ppc, ppc64, x86

Signed-off-by: orbea <orbea <AT> riseup.net>

 net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild
index 9b50573..be693dc 100644
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild
@@ -13,7 +13,7 @@ if [ "${PV}" = "9999" ]; then
 	inherit git-r3
 	EGIT_REPO_URI="https://w1.fi/hostap.git"
 else
-	KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~loong ~mips ~ppc ~ppc64 ~riscv ~sparc ~x86"
+	KEYWORDS="~alpha amd64 ~arm ~arm64 ~loong ~mips ppc ppc64 ~riscv ~sparc x86"
 	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
 fi
 


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2024-09-13  1:40 orbea
  0 siblings, 0 replies; 19+ messages in thread
From: orbea @ 2024-09-13  1:40 UTC (permalink / raw
  To: gentoo-commits

commit:     22676f5ca7e48d1bb21eda234ff32268ad5ac6e2
Author:     orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Fri Sep 13 01:20:09 2024 +0000
Commit:     orbea <orbea <AT> riseup <DOT> net>
CommitDate: Fri Sep 13 01:20:09 2024 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=22676f5c

net-wireless/wpa_supplicant: sync ::gentoo

Signed-off-by: orbea <orbea <AT> riseup.net>

 net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild | 2 +-
 net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild
index 7e23602..c56c16d 100644
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild
@@ -124,7 +124,7 @@ src_prepare() {
 
 	# bug (912315)
 	eapply "${FILESDIR}/${PN}-2.10-allow-legacy-renegotiation.patch"
-	eapply "${FILESDIR}/${P}-Drop-security-level-to-0-with-OpenSSL-3.0-wh.patch"
+	eapply "${FILESDIR}/${PN}-2.10-Drop-security-level-to-0-with-OpenSSL-3.0-wh.patch"
 
 	# bug (640492)
 	sed -i 's#-Werror ##' wpa_supplicant/Makefile || die

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild
index 62fc349..9b50573 100644
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild
@@ -124,7 +124,7 @@ src_prepare() {
 
 	# bug (912315)
 	eapply "${FILESDIR}/${PN}-2.10-allow-legacy-renegotiation.patch"
-	eapply "${FILESDIR}/${P}-Drop-security-level-to-0-with-OpenSSL-3.0-wh.patch"
+	eapply "${FILESDIR}/${PN}-2.10-Drop-security-level-to-0-with-OpenSSL-3.0-wh.patch"
 
 	# bug (640492)
 	sed -i 's#-Werror ##' wpa_supplicant/Makefile || die


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2024-09-13  1:40 orbea
  0 siblings, 0 replies; 19+ messages in thread
From: orbea @ 2024-09-13  1:40 UTC (permalink / raw
  To: gentoo-commits

commit:     831784013d3028079abd1146ed0c825a36b25316
Author:     orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Fri Sep 13 01:17:14 2024 +0000
Commit:     orbea <orbea <AT> riseup <DOT> net>
CommitDate: Fri Sep 13 01:17:14 2024 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=83178401

net-wireless/wpa_supplicant: unkeyword ~ia64

Signed-off-by: orbea <orbea <AT> riseup.net>

 net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild | 2 +-
 net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild
index b9d2296..7e23602 100644
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild
@@ -13,7 +13,7 @@ if [ "${PV}" = "9999" ]; then
 	inherit git-r3
 	EGIT_REPO_URI="https://w1.fi/hostap.git"
 else
-	KEYWORDS="~alpha amd64 arm arm64 ~ia64 ~loong ~mips ppc ppc64 ~riscv ~sparc x86"
+	KEYWORDS="~alpha amd64 arm arm64 ~loong ~mips ppc ppc64 ~riscv ~sparc x86"
 	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
 fi
 

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild
index abd1668..62fc349 100644
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild
@@ -13,7 +13,7 @@ if [ "${PV}" = "9999" ]; then
 	inherit git-r3
 	EGIT_REPO_URI="https://w1.fi/hostap.git"
 else
-	KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~ia64 ~loong ~mips ~ppc ~ppc64 ~riscv ~sparc ~x86"
+	KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~loong ~mips ~ppc ~ppc64 ~riscv ~sparc ~x86"
 	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
 fi
 


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2024-08-01 18:38 orbea
  0 siblings, 0 replies; 19+ messages in thread
From: orbea @ 2024-08-01 18:38 UTC (permalink / raw
  To: gentoo-commits

commit:     2393d72c5ff384f0d7b91ce9bd5575f49eb3ae12
Author:     orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Thu Aug  1 18:38:06 2024 +0000
Commit:     orbea <orbea <AT> riseup <DOT> net>
CommitDate: Thu Aug  1 18:38:06 2024 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=2393d72c

net-wireless/wpa_supplicant: add 2.10-r5

Signed-off-by: orbea <orbea <AT> riseup.net>

 .../wpa_supplicant/wpa_supplicant-2.10-r5.ebuild   | 480 +++++++++++++++++++++
 1 file changed, 480 insertions(+)

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild
new file mode 100644
index 0000000..abd1668
--- /dev/null
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild
@@ -0,0 +1,480 @@
+# Copyright 1999-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit desktop linux-info qmake-utils readme.gentoo-r1 systemd toolchain-funcs
+
+DESCRIPTION="IEEE 802.1X/WPA supplicant for secure wireless transfers"
+HOMEPAGE="https://w1.fi/wpa_supplicant/"
+LICENSE="|| ( GPL-2 BSD )"
+
+if [ "${PV}" = "9999" ]; then
+	inherit git-r3
+	EGIT_REPO_URI="https://w1.fi/hostap.git"
+else
+	KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~ia64 ~loong ~mips ~ppc ~ppc64 ~riscv ~sparc ~x86"
+	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
+fi
+
+SLOT="0"
+IUSE="ap broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls tkip uncommon-eap-types wep wimax wps"
+
+# CONFIG_PRIVSEP=y does not have sufficient support for the new driver
+# interface functions used for MACsec, so this combination cannot be used
+# at least for now. bug #684442
+REQUIRED_USE="
+	macsec? ( !privsep )
+	privsep? ( !macsec )
+	broadcom-sta? ( !fils !mesh !mbo )
+"
+
+DEPEND="
+	>=dev-libs/openssl-1.0.2k:=
+	dbus? ( sys-apps/dbus )
+	kernel_linux? (
+		>=dev-libs/libnl-3.2:3
+		eap-sim? ( sys-apps/pcsc-lite )
+	)
+	!kernel_linux? ( net-libs/libpcap )
+	qt5? (
+		dev-qt/qtcore:5
+		dev-qt/qtgui:5
+		dev-qt/qtsvg:5
+		dev-qt/qtwidgets:5
+	)
+	readline? (
+		sys-libs/ncurses:0=
+		sys-libs/readline:0=
+	)
+"
+RDEPEND="${DEPEND}
+	selinux? ( sec-policy/selinux-networkmanager )
+	kernel_linux? (
+		net-wireless/wireless-regdb
+	)
+"
+BDEPEND="virtual/pkgconfig"
+
+DOC_CONTENTS="
+	If this is a clean installation of wpa_supplicant, you
+	have to create a configuration file named
+	/etc/wpa_supplicant/wpa_supplicant.conf
+	An example configuration file is available for reference in
+	/usr/share/doc/${PF}/
+"
+
+S="${WORKDIR}/${P}/${PN}"
+
+Kconfig_style_config() {
+		#param 1 is CONFIG_* item
+		#param 2 is what to set it = to, defaulting in y
+		CONFIG_PARAM="${CONFIG_HEADER:-CONFIG_}$1"
+		setting="${2:-y}"
+
+		if [ ! $setting = n ]; then
+			#first remove any leading "# " if $2 is not n
+			sed -i "/^# *$CONFIG_PARAM=/s/^# *//" .config || echo "Kconfig_style_config error uncommenting $CONFIG_PARAM"
+			#set item = $setting (defaulting to y)
+			if ! sed -i "/^$CONFIG_PARAM\>/s/=.*/=$setting/" .config; then
+				echo "Kconfig_style_config error setting $CONFIG_PARAM=$setting"
+			fi
+			if [ -z "$( grep ^$CONFIG_PARAM= .config )" ] ; then
+				echo "$CONFIG_PARAM=$setting" >>.config
+			fi
+		else
+			#ensure item commented out
+			if ! sed -i "/^$CONFIG_PARAM\>/s/$CONFIG_PARAM/# $CONFIG_PARAM/" .config; then
+				echo "Kconfig_style_config error commenting $CONFIG_PARAM"
+			fi
+		fi
+}
+
+src_prepare() {
+	default
+
+	# net/bpf.h needed for net-libs/libpcap on Gentoo/FreeBSD
+	sed -i \
+		-e "s:\(#include <pcap\.h>\):#include <net/bpf.h>\n\1:" \
+		../src/l2_packet/l2_packet_freebsd.c || die
+
+	# Change configuration to match Gentoo locations (bug #143750)
+	sed -i \
+		-e "s:/usr/lib/opensc:/usr/$(get_libdir):" \
+		-e "s:/usr/lib/pkcs11:/usr/$(get_libdir):" \
+		wpa_supplicant.conf || die
+
+	# systemd entries to D-Bus service files (bug #372877)
+	echo 'SystemdService=wpa_supplicant.service' \
+		| tee -a dbus/*.service >/dev/null || die
+
+	cd "${WORKDIR}/${P}" || die
+
+	if use wimax; then
+		# generate-libeap-peer.patch comes before
+		# fix-undefined-reference-to-random_get_bytes.patch
+		eapply "${FILESDIR}/${P}-generate-libeap-peer.patch"
+
+		# multilib-strict fix (bug #373685)
+		sed -e "s/\/usr\/lib/\/usr\/$(get_libdir)/" -i src/eap_peer/Makefile || die
+	fi
+
+	# bug (320097)
+	eapply "${FILESDIR}/${PN}-2.6-do-not-call-dbus-functions-with-NULL-path.patch"
+
+	# bug (912315)
+	eapply "${FILESDIR}/${PN}-2.10-allow-legacy-renegotiation.patch"
+	eapply "${FILESDIR}/${P}-Drop-security-level-to-0-with-OpenSSL-3.0-wh.patch"
+
+	# bug (640492)
+	sed -i 's#-Werror ##' wpa_supplicant/Makefile || die
+
+	# LibreSSL patch (https://github.com/gentoo/libressl/issues/336)
+	eapply "${FILESDIR}/${PN}-2.9-libressl.patch"
+}
+
+src_configure() {
+	# Toolchain setup
+	tc-export CC PKG_CONFIG
+
+	cp defconfig .config || die
+
+	# Basic setup
+	Kconfig_style_config CTRL_IFACE
+	Kconfig_style_config MATCH_IFACE
+	Kconfig_style_config BACKEND file
+	Kconfig_style_config IBSS_RSN
+	Kconfig_style_config IEEE80211W
+	Kconfig_style_config IEEE80211R
+	Kconfig_style_config HT_OVERRIDES
+	Kconfig_style_config VHT_OVERRIDES
+	Kconfig_style_config OCV
+	Kconfig_style_config TLSV11
+	Kconfig_style_config TLSV12
+	Kconfig_style_config GETRANDOM
+
+	# Basic authentication methods
+	# NOTE: we don't set GPSK or SAKE as they conflict
+	# with the below options
+	Kconfig_style_config EAP_GTC
+	Kconfig_style_config EAP_MD5
+	Kconfig_style_config EAP_OTP
+	Kconfig_style_config EAP_PAX
+	Kconfig_style_config EAP_PSK
+	Kconfig_style_config EAP_TLV
+	Kconfig_style_config EAP_EXE
+	Kconfig_style_config IEEE8021X_EAPOL
+	Kconfig_style_config PKCS12
+	Kconfig_style_config PEERKEY
+	Kconfig_style_config EAP_LEAP
+	Kconfig_style_config EAP_MSCHAPV2
+	Kconfig_style_config EAP_PEAP
+	Kconfig_style_config EAP_TEAP
+	Kconfig_style_config EAP_TLS
+	Kconfig_style_config EAP_TTLS
+
+	# Enabling background scanning.
+	Kconfig_style_config BGSCAN_SIMPLE
+	Kconfig_style_config BGSCAN_LEARN
+
+	if use dbus ; then
+		Kconfig_style_config CTRL_IFACE_DBUS
+		Kconfig_style_config CTRL_IFACE_DBUS_NEW
+		Kconfig_style_config CTRL_IFACE_DBUS_INTRO
+	else
+		Kconfig_style_config CTRL_IFACE_DBUS n
+		Kconfig_style_config CTRL_IFACE_DBUS_NEW n
+		Kconfig_style_config CTRL_IFACE_DBUS_INTRO n
+	fi
+
+	if use eapol-test ; then
+		Kconfig_style_config EAPOL_TEST
+	fi
+
+	# Enable support for writing debug info to a log file and syslog.
+	Kconfig_style_config DEBUG_FILE
+	Kconfig_style_config DEBUG_SYSLOG
+
+	if use hs2-0 ; then
+		Kconfig_style_config INTERWORKING
+		Kconfig_style_config HS20
+	fi
+
+	if use mbo ; then
+		Kconfig_style_config MBO
+	else
+		Kconfig_style_config MBO n
+	fi
+
+	if use uncommon-eap-types; then
+		Kconfig_style_config EAP_GPSK
+		Kconfig_style_config EAP_SAKE
+		Kconfig_style_config EAP_GPSK_SHA256
+		Kconfig_style_config EAP_IKEV2
+		Kconfig_style_config EAP_EKE
+	fi
+
+	if use eap-sim ; then
+		# Smart card authentication
+		Kconfig_style_config EAP_SIM
+		Kconfig_style_config EAP_AKA
+		Kconfig_style_config EAP_AKA_PRIME
+		Kconfig_style_config PCSC
+	fi
+
+	if use fasteap ; then
+		Kconfig_style_config EAP_FAST
+	fi
+
+	if use readline ; then
+		# readline/history support for wpa_cli
+		Kconfig_style_config READLINE
+	else
+		#internal line edit mode for wpa_cli
+		Kconfig_style_config WPA_CLI_EDIT
+	fi
+
+	Kconfig_style_config TLS openssl
+	Kconfig_style_config FST
+
+	Kconfig_style_config EAP_PWD
+	if use fils; then
+		Kconfig_style_config FILS
+		Kconfig_style_config FILS_SK_PFS
+	fi
+	if use mesh; then
+		Kconfig_style_config MESH
+	else
+		Kconfig_style_config MESH n
+	fi
+	# WPA3
+	Kconfig_style_config OWE
+	Kconfig_style_config SAE
+	Kconfig_style_config DPP
+	Kconfig_style_config DPP2
+	Kconfig_style_config SUITEB192
+	Kconfig_style_config SUITEB
+
+	if use wep ; then
+		Kconfig_style_config WEP
+	else
+		Kconfig_style_config WEP n
+	fi
+
+	# Watch out, reversed logic
+	if use tkip ; then
+		Kconfig_style_config NO_TKIP n
+	else
+		Kconfig_style_config NO_TKIP
+	fi
+
+	if use smartcard ; then
+		Kconfig_style_config SMARTCARD
+	else
+		Kconfig_style_config SMARTCARD n
+	fi
+
+	if use tdls ; then
+		Kconfig_style_config TDLS
+	fi
+
+	if use kernel_linux ; then
+		# Linux specific drivers
+		Kconfig_style_config DRIVER_ATMEL
+		Kconfig_style_config DRIVER_HOSTAP
+		Kconfig_style_config DRIVER_IPW
+		Kconfig_style_config DRIVER_NL80211
+		Kconfig_style_config DRIVER_RALINK
+		Kconfig_style_config DRIVER_WEXT
+		Kconfig_style_config DRIVER_WIRED
+
+		if use macsec ; then
+			#requires something, no idea what
+			#Kconfig_style_config DRIVER_MACSEC_QCA
+			Kconfig_style_config DRIVER_MACSEC_LINUX
+			Kconfig_style_config MACSEC
+		else
+			# bug #831369 and bug #684442
+			Kconfig_style_config DRIVER_MACSEC_LINUX n
+			Kconfig_style_config MACSEC n
+		fi
+
+		if use ps3 ; then
+			Kconfig_style_config DRIVER_PS3
+		fi
+	fi
+
+	# Wi-Fi Protected Setup (WPS)
+	if use wps ; then
+		Kconfig_style_config WPS
+		Kconfig_style_config WPS2
+		# USB Flash Drive
+		Kconfig_style_config WPS_UFD
+		# External Registrar
+		Kconfig_style_config WPS_ER
+		# Universal Plug'n'Play
+		Kconfig_style_config WPS_UPNP
+		# Near Field Communication
+		Kconfig_style_config WPS_NFC
+	else
+		Kconfig_style_config WPS n
+		Kconfig_style_config WPS2 n
+		Kconfig_style_config WPS_UFD n
+		Kconfig_style_config WPS_ER n
+		Kconfig_style_config WPS_UPNP n
+		Kconfig_style_config WPS_NFC n
+	fi
+
+	# Wi-Fi Direct (WiDi)
+	if use p2p ; then
+		Kconfig_style_config P2P
+		Kconfig_style_config WIFI_DISPLAY
+	else
+		Kconfig_style_config P2P n
+		Kconfig_style_config WIFI_DISPLAY n
+	fi
+
+	# Access Point Mode
+	if use ap ; then
+		Kconfig_style_config AP
+	else
+		Kconfig_style_config AP n
+	fi
+
+	# Enable essentials for AP/P2P
+	if use ap || use p2p ; then
+		# Enabling HT support (802.11n)
+		Kconfig_style_config IEEE80211N
+
+		# Enabling VHT support (802.11ac)
+		Kconfig_style_config IEEE80211AC
+	fi
+
+	# Enable mitigation against certain attacks against TKIP
+	Kconfig_style_config DELAYED_MIC_ERROR_REPORT
+
+	if use privsep ; then
+		Kconfig_style_config PRIVSEP
+	fi
+
+	if use kernel_linux ; then
+		Kconfig_style_config LIBNL32
+	fi
+
+	if use qt5 ; then
+		pushd "${S}"/wpa_gui-qt4 > /dev/null || die
+		eqmake5 wpa_gui.pro
+		popd > /dev/null || die
+	fi
+}
+
+src_compile() {
+	einfo "Building wpa_supplicant"
+	emake V=1 BINDIR=/usr/sbin
+
+	if use wimax; then
+		emake -C ../src/eap_peer clean
+		emake -C ../src/eap_peer
+	fi
+
+	if use qt5; then
+		einfo "Building wpa_gui"
+		emake -C "${S}"/wpa_gui-qt4
+	fi
+
+	if use eapol-test ; then
+		emake eapol_test
+	fi
+}
+
+src_install() {
+	dosbin wpa_supplicant
+	use privsep && dosbin wpa_priv
+	dobin wpa_cli wpa_passphrase
+
+	newinitd "${FILESDIR}/${PN}-init.d" wpa_supplicant
+	newconfd "${FILESDIR}/${PN}-conf.d" wpa_supplicant
+
+	exeinto /etc/wpa_supplicant/
+	newexe "${FILESDIR}/wpa_cli-r1.sh" wpa_cli.sh
+
+	readme.gentoo_create_doc
+	dodoc ChangeLog {eap_testing,todo}.txt README{,-WPS} \
+		wpa_supplicant.conf
+
+	newdoc .config build-config
+
+	if [ "${PV}" != "9999" ]; then
+		doman doc/docbook/*.{5,8}
+	fi
+
+	if use qt5 ; then
+		into /usr
+		dobin wpa_gui-qt4/wpa_gui
+		doicon wpa_gui-qt4/icons/wpa_gui.svg
+		domenu wpa_gui-qt4/wpa_gui.desktop
+	else
+		rm "${ED}"/usr/share/man/man8/wpa_gui.8
+	fi
+
+	use wimax && emake DESTDIR="${D}" -C ../src/eap_peer install
+
+	if use dbus ; then
+		pushd "${S}"/dbus > /dev/null || die
+		insinto /etc/dbus-1/system.d
+		newins dbus-wpa_supplicant.conf wpa_supplicant.conf
+		insinto /usr/share/dbus-1/system-services
+		doins fi.w1.wpa_supplicant1.service
+		popd > /dev/null || die
+
+		# This unit relies on dbus support, bug 538600.
+		systemd_dounit systemd/wpa_supplicant.service
+	fi
+
+	if use eapol-test ; then
+		dobin eapol_test
+	fi
+
+	systemd_dounit "systemd/wpa_supplicant@.service"
+	systemd_dounit "systemd/wpa_supplicant-nl80211@.service"
+	systemd_dounit "systemd/wpa_supplicant-wired@.service"
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+
+	if [[ -e "${EROOT}"/etc/wpa_supplicant.conf ]] ; then
+		echo
+		ewarn "WARNING: your old configuration file ${EROOT}/etc/wpa_supplicant.conf"
+		ewarn "needs to be moved to ${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf"
+	fi
+	if ! use wep; then
+		einfo "WARNING: You are building with WEP support disabled, which is recommended since"
+		einfo "this protocol is deprecated and insecure.  If you still need to connect to"
+		einfo "WEP-enabled networks, you may turn this flag back on.  With this flag off,"
+		einfo "WEP-enabled networks will not even show up as available."
+		einfo "If your network is missing you may wish to USE=wep"
+	fi
+	if ! use tkip; then
+		ewarn "WARNING: You are building with TKIP support disabled, which is recommended since"
+		ewarn "this protocol is deprecated and insecure.  If you still need to connect to"
+		ewarn "TKIP-enabled networks, you may turn this flag back on.  With this flag off,"
+		ewarn "TKIP-enabled networks, including mixed mode TKIP/AES-CCMP will not even show up"
+		ewarn "as available.  If your network is missing you may wish to USE=tkip"
+	fi
+
+	# Mea culpa, feel free to remove that after some time --mgorny.
+	local fn
+	for fn in wpa_supplicant{,@wlan0}.service; do
+		if [[ -e "${EROOT}"/etc/systemd/system/network.target.wants/${fn} ]]
+		then
+			ebegin "Moving ${fn} to multi-user.target"
+			mv "${EROOT}"/etc/systemd/system/network.target.wants/${fn} \
+				"${EROOT}"/etc/systemd/system/multi-user.target.wants/ || die
+			eend ${?} \
+				"Please try to re-enable ${fn}"
+		fi
+	done
+
+	systemd_reenable wpa_supplicant.service
+}


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2024-08-01 18:38 orbea
  0 siblings, 0 replies; 19+ messages in thread
From: orbea @ 2024-08-01 18:38 UTC (permalink / raw
  To: gentoo-commits

commit:     a085f2678f2c0bd054c4d72ca5672fb833700f97
Author:     orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Thu Aug  1 18:36:56 2024 +0000
Commit:     orbea <orbea <AT> riseup <DOT> net>
CommitDate: Thu Aug  1 18:36:56 2024 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=a085f267

net-wireless/wpa_supplicant: sync ::gentoo

Signed-off-by: orbea <orbea <AT> riseup.net>

 net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild
index 03b32ce..b9d2296 100644
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild
@@ -59,9 +59,9 @@ BDEPEND="virtual/pkgconfig"
 DOC_CONTENTS="
 	If this is a clean installation of wpa_supplicant, you
 	have to create a configuration file named
-	${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf
+	/etc/wpa_supplicant/wpa_supplicant.conf
 	An example configuration file is available for reference in
-	${EROOT}/usr/share/doc/${PF}/
+	/usr/share/doc/${PF}/
 "
 
 S="${WORKDIR}/${P}/${PN}"


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2024-03-10  7:27 orbea
  0 siblings, 0 replies; 19+ messages in thread
From: orbea @ 2024-03-10  7:27 UTC (permalink / raw
  To: gentoo-commits

commit:     407a4224bcd6c622be38d39fa4b84197ea0c65e1
Author:     orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Sun Mar 10 07:26:31 2024 +0000
Commit:     orbea <orbea <AT> riseup <DOT> net>
CommitDate: Sun Mar 10 07:26:31 2024 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=407a4224

net-wireless/wpa_supplicant: drop 2.10-r1, 2.10-r2, 2.10-r3

Signed-off-by: orbea <orbea <AT> riseup.net>

 .../wpa_supplicant/wpa_supplicant-2.10-r1.ebuild   | 504 ---------------------
 .../wpa_supplicant/wpa_supplicant-2.10-r2.ebuild   | 486 --------------------
 .../wpa_supplicant/wpa_supplicant-2.10-r3.ebuild   | 490 --------------------
 3 files changed, 1480 deletions(-)

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r1.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r1.ebuild
deleted file mode 100644
index d99e4d4..0000000
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r1.ebuild
+++ /dev/null
@@ -1,504 +0,0 @@
-# Copyright 1999-2024 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-inherit desktop linux-info qmake-utils readme.gentoo-r1 systemd toolchain-funcs
-
-DESCRIPTION="IEEE 802.1X/WPA supplicant for secure wireless transfers"
-HOMEPAGE="https://w1.fi/wpa_supplicant/"
-LICENSE="|| ( GPL-2 BSD )"
-
-if [ "${PV}" = "9999" ]; then
-	inherit git-r3
-	EGIT_REPO_URI="https://w1.fi/hostap.git"
-else
-	KEYWORDS="~alpha amd64 arm arm64 ~ia64 ~loong ~mips ppc ppc64 ~riscv ~sparc x86"
-	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
-fi
-
-SLOT="0"
-IUSE="ap broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls tkip uncommon-eap-types wep wimax wps"
-
-# CONFIG_PRIVSEP=y does not have sufficient support for the new driver
-# interface functions used for MACsec, so this combination cannot be used
-# at least for now. bug #684442
-REQUIRED_USE="
-	macsec? ( !privsep )
-	privsep? ( !macsec )
-	broadcom-sta? ( !fils !mesh !mbo )
-"
-
-DEPEND="
-	>=dev-libs/openssl-1.0.2k:=
-	dbus? ( sys-apps/dbus )
-	kernel_linux? (
-		>=dev-libs/libnl-3.2:3
-		eap-sim? ( sys-apps/pcsc-lite )
-	)
-	!kernel_linux? ( net-libs/libpcap )
-	qt5? (
-		dev-qt/qtcore:5
-		dev-qt/qtgui:5
-		dev-qt/qtsvg:5
-		dev-qt/qtwidgets:5
-	)
-	readline? (
-		sys-libs/ncurses:0=
-		sys-libs/readline:0=
-	)
-"
-RDEPEND="${DEPEND}
-	selinux? ( sec-policy/selinux-networkmanager )
-	kernel_linux? (
-		net-wireless/wireless-regdb
-	)
-"
-BDEPEND="virtual/pkgconfig"
-
-DOC_CONTENTS="
-	If this is a clean installation of wpa_supplicant, you
-	have to create a configuration file named
-	${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf
-	An example configuration file is available for reference in
-	${EROOT}/usr/share/doc/${PF}/
-"
-
-S="${WORKDIR}/${P}/${PN}"
-
-Kconfig_style_config() {
-		#param 1 is CONFIG_* item
-		#param 2 is what to set it = to, defaulting in y
-		CONFIG_PARAM="${CONFIG_HEADER:-CONFIG_}$1"
-		setting="${2:-y}"
-
-		if [ ! $setting = n ]; then
-			#first remove any leading "# " if $2 is not n
-			sed -i "/^# *$CONFIG_PARAM=/s/^# *//" .config || echo "Kconfig_style_config error uncommenting $CONFIG_PARAM"
-			#set item = $setting (defaulting to y)
-			sed -i "/^$CONFIG_PARAM\>/s/=.*/=$setting/" .config || echo "Kconfig_style_config error setting $CONFIG_PARAM=$setting"
-			if [ -z "$( grep ^$CONFIG_PARAM= .config )" ] ; then
-				echo "$CONFIG_PARAM=$setting" >>.config
-			fi
-		else
-			#ensure item commented out
-			sed -i "/^$CONFIG_PARAM\>/s/$CONFIG_PARAM/# $CONFIG_PARAM/" .config || echo "Kconfig_style_config error commenting $CONFIG_PARAM"
-		fi
-}
-
-pkg_pretend() {
-	CONFIG_CHECK=""
-
-	check_extra_config
-
-	if linux_config_exists && linux_chkconfig_builtin CFG80211 &&
-		[[ $(linux_chkconfig_string EXTRA_FIRMWARE) != *regulatory.db* ]]
-	then
-		ewarn "REGULATORY DOMAIN PROBLEM:"
-		ewarn "With CONFIG_CFG80211=y (built-in), the driver won't be able to load regulatory.db from"
-		ewarn " /lib/firmware, resulting in broken regulatory domain support.  Please set CONFIG_CFG80211=m"
-		ewarn " or add regulatory.db and regulatory.db.p7s to CONFIG_EXTRA_FIRMWARE."
-	fi
-}
-
-src_prepare() {
-	default
-
-	# net/bpf.h needed for net-libs/libpcap on Gentoo/FreeBSD
-	sed -i \
-		-e "s:\(#include <pcap\.h>\):#include <net/bpf.h>\n\1:" \
-		../src/l2_packet/l2_packet_freebsd.c || die
-
-	# People seem to take the example configuration file too literally (bug #102361)
-	sed -i \
-		-e "s:^\(opensc_engine_path\):#\1:" \
-		-e "s:^\(pkcs11_engine_path\):#\1:" \
-		-e "s:^\(pkcs11_module_path\):#\1:" \
-		wpa_supplicant.conf || die
-
-	# Change configuration to match Gentoo locations (bug #143750)
-	sed -i \
-		-e "s:/usr/lib/opensc:/usr/$(get_libdir):" \
-		-e "s:/usr/lib/pkcs11:/usr/$(get_libdir):" \
-		wpa_supplicant.conf || die
-
-	# systemd entries to D-Bus service files (bug #372877)
-	echo 'SystemdService=wpa_supplicant.service' \
-		| tee -a dbus/*.service >/dev/null || die
-
-	cd "${WORKDIR}/${P}" || die
-
-	if use wimax; then
-		# generate-libeap-peer.patch comes before
-		# fix-undefined-reference-to-random_get_bytes.patch
-		eapply "${FILESDIR}/${P}-generate-libeap-peer.patch"
-
-		# multilib-strict fix (bug #373685)
-		sed -e "s/\/usr\/lib/\/usr\/$(get_libdir)/" -i src/eap_peer/Makefile || die
-	fi
-
-	# bug (320097)
-	eapply "${FILESDIR}/${PN}-2.6-do-not-call-dbus-functions-with-NULL-path.patch"
-
-	# bug (640492)
-	sed -i 's#-Werror ##' wpa_supplicant/Makefile || die
-
-	# LibreSSL patch (https://github.com/gentoo/libressl/issues/336)
-	eapply "${FILESDIR}/${PN}-2.9-libressl.patch"
-}
-
-src_configure() {
-	# Toolchain setup
-	tc-export CC PKG_CONFIG
-
-	cp defconfig .config || die
-
-	# Basic setup
-	Kconfig_style_config CTRL_IFACE
-	Kconfig_style_config MATCH_IFACE
-	Kconfig_style_config BACKEND file
-	Kconfig_style_config IBSS_RSN
-	Kconfig_style_config IEEE80211W
-	Kconfig_style_config IEEE80211R
-	Kconfig_style_config HT_OVERRIDES
-	Kconfig_style_config VHT_OVERRIDES
-	Kconfig_style_config OCV
-	Kconfig_style_config TLSV11
-	Kconfig_style_config TLSV12
-	Kconfig_style_config GETRANDOM
-
-	# Basic authentication methods
-	# NOTE: we don't set GPSK or SAKE as they conflict
-	# with the below options
-	Kconfig_style_config EAP_GTC
-	Kconfig_style_config EAP_MD5
-	Kconfig_style_config EAP_OTP
-	Kconfig_style_config EAP_PAX
-	Kconfig_style_config EAP_PSK
-	Kconfig_style_config EAP_TLV
-	Kconfig_style_config EAP_EXE
-	Kconfig_style_config IEEE8021X_EAPOL
-	Kconfig_style_config PKCS12
-	Kconfig_style_config PEERKEY
-	Kconfig_style_config EAP_LEAP
-	Kconfig_style_config EAP_MSCHAPV2
-	Kconfig_style_config EAP_PEAP
-	Kconfig_style_config EAP_TEAP
-	Kconfig_style_config EAP_TLS
-	Kconfig_style_config EAP_TTLS
-
-	# Enabling background scanning.
-	Kconfig_style_config BGSCAN_SIMPLE
-	Kconfig_style_config BGSCAN_LEARN
-
-	if use dbus ; then
-		Kconfig_style_config CTRL_IFACE_DBUS
-		Kconfig_style_config CTRL_IFACE_DBUS_NEW
-		Kconfig_style_config CTRL_IFACE_DBUS_INTRO
-	else
-		Kconfig_style_config CTRL_IFACE_DBUS n
-		Kconfig_style_config CTRL_IFACE_DBUS_NEW n
-		Kconfig_style_config CTRL_IFACE_DBUS_INTRO n
-	fi
-
-	if use eapol-test ; then
-		Kconfig_style_config EAPOL_TEST
-	fi
-
-	# Enable support for writing debug info to a log file and syslog.
-	Kconfig_style_config DEBUG_FILE
-	Kconfig_style_config DEBUG_SYSLOG
-
-	if use hs2-0 ; then
-		Kconfig_style_config INTERWORKING
-		Kconfig_style_config HS20
-	fi
-
-	if use mbo ; then
-		Kconfig_style_config MBO
-	else
-		Kconfig_style_config MBO n
-	fi
-
-	if use uncommon-eap-types; then
-		Kconfig_style_config EAP_GPSK
-		Kconfig_style_config EAP_SAKE
-		Kconfig_style_config EAP_GPSK_SHA256
-		Kconfig_style_config EAP_IKEV2
-		Kconfig_style_config EAP_EKE
-	fi
-
-	if use eap-sim ; then
-		# Smart card authentication
-		Kconfig_style_config EAP_SIM
-		Kconfig_style_config EAP_AKA
-		Kconfig_style_config EAP_AKA_PRIME
-		Kconfig_style_config PCSC
-	fi
-
-	if use fasteap ; then
-		Kconfig_style_config EAP_FAST
-	fi
-
-	if use readline ; then
-		# readline/history support for wpa_cli
-		Kconfig_style_config READLINE
-	else
-		#internal line edit mode for wpa_cli
-		Kconfig_style_config WPA_CLI_EDIT
-	fi
-
-	Kconfig_style_config TLS openssl
-	Kconfig_style_config FST
-
-	Kconfig_style_config EAP_PWD
-	if use fils; then
-		Kconfig_style_config FILS
-		Kconfig_style_config FILS_SK_PFS
-	fi
-	if use mesh; then
-		Kconfig_style_config MESH
-	else
-		Kconfig_style_config MESH n
-	fi
-	# WPA3
-	Kconfig_style_config OWE
-	Kconfig_style_config SAE
-	Kconfig_style_config DPP
-	Kconfig_style_config DPP2
-	Kconfig_style_config SUITEB192
-	Kconfig_style_config SUITEB
-
-	if use wep ; then
-		Kconfig_style_config WEP
-	else
-		Kconfig_style_config WEP n
-	fi
-
-	# Watch out, reversed logic
-	if use tkip ; then
-		Kconfig_style_config NO_TKIP n
-	else
-		Kconfig_style_config NO_TKIP
-	fi
-
-	if use smartcard ; then
-		Kconfig_style_config SMARTCARD
-	else
-		Kconfig_style_config SMARTCARD n
-	fi
-
-	if use tdls ; then
-		Kconfig_style_config TDLS
-	fi
-
-	if use kernel_linux ; then
-		# Linux specific drivers
-		Kconfig_style_config DRIVER_ATMEL
-		Kconfig_style_config DRIVER_HOSTAP
-		Kconfig_style_config DRIVER_IPW
-		Kconfig_style_config DRIVER_NL80211
-		Kconfig_style_config DRIVER_RALINK
-		Kconfig_style_config DRIVER_WEXT
-		Kconfig_style_config DRIVER_WIRED
-
-		if use macsec ; then
-			#requires something, no idea what
-			#Kconfig_style_config DRIVER_MACSEC_QCA
-			Kconfig_style_config DRIVER_MACSEC_LINUX
-			Kconfig_style_config MACSEC
-		else
-			# bug #831369 and bug #684442
-			Kconfig_style_config DRIVER_MACSEC_LINUX n
-			Kconfig_style_config MACSEC n
-		fi
-
-		if use ps3 ; then
-			Kconfig_style_config DRIVER_PS3
-		fi
-	fi
-
-	# Wi-Fi Protected Setup (WPS)
-	if use wps ; then
-		Kconfig_style_config WPS
-		Kconfig_style_config WPS2
-		# USB Flash Drive
-		Kconfig_style_config WPS_UFD
-		# External Registrar
-		Kconfig_style_config WPS_ER
-		# Universal Plug'n'Play
-		Kconfig_style_config WPS_UPNP
-		# Near Field Communication
-		Kconfig_style_config WPS_NFC
-	else
-		Kconfig_style_config WPS n
-		Kconfig_style_config WPS2 n
-		Kconfig_style_config WPS_UFD n
-		Kconfig_style_config WPS_ER n
-		Kconfig_style_config WPS_UPNP n
-		Kconfig_style_config WPS_NFC n
-	fi
-
-	# Wi-Fi Direct (WiDi)
-	if use p2p ; then
-		Kconfig_style_config P2P
-		Kconfig_style_config WIFI_DISPLAY
-	else
-		Kconfig_style_config P2P n
-		Kconfig_style_config WIFI_DISPLAY n
-	fi
-
-	# Access Point Mode
-	if use ap ; then
-		Kconfig_style_config AP
-	else
-		Kconfig_style_config AP n
-	fi
-
-	# Enable essentials for AP/P2P
-	if use ap || use p2p ; then
-		# Enabling HT support (802.11n)
-		Kconfig_style_config IEEE80211N
-
-		# Enabling VHT support (802.11ac)
-		Kconfig_style_config IEEE80211AC
-	fi
-
-	# Enable mitigation against certain attacks against TKIP
-	Kconfig_style_config DELAYED_MIC_ERROR_REPORT
-
-	if use privsep ; then
-		Kconfig_style_config PRIVSEP
-	fi
-
-	if use kernel_linux ; then
-		Kconfig_style_config LIBNL32
-	fi
-
-	if use qt5 ; then
-		pushd "${S}"/wpa_gui-qt4 > /dev/null || die
-		eqmake5 wpa_gui.pro
-		popd > /dev/null || die
-	fi
-}
-
-src_compile() {
-	einfo "Building wpa_supplicant"
-	emake V=1 BINDIR=/usr/sbin
-
-	if use wimax; then
-		emake -C ../src/eap_peer clean
-		emake -C ../src/eap_peer
-	fi
-
-	if use qt5; then
-		einfo "Building wpa_gui"
-		emake -C "${S}"/wpa_gui-qt4
-	fi
-
-	if use eapol-test ; then
-		emake eapol_test
-	fi
-}
-
-src_install() {
-	dosbin wpa_supplicant
-	use privsep && dosbin wpa_priv
-	dobin wpa_cli wpa_passphrase
-
-	# baselayout-1 compat
-	if has_version "<sys-apps/baselayout-2.0.0"; then
-		dodir /sbin
-		dosym ../usr/sbin/wpa_supplicant /sbin/wpa_supplicant
-		dodir /bin
-		dosym ../usr/bin/wpa_cli /bin/wpa_cli
-	fi
-
-	if has_version ">=sys-apps/openrc-0.5.0"; then
-		newinitd "${FILESDIR}/${PN}-init.d" wpa_supplicant
-		newconfd "${FILESDIR}/${PN}-conf.d" wpa_supplicant
-	fi
-
-	exeinto /etc/wpa_supplicant/
-	newexe "${FILESDIR}/wpa_cli.sh" wpa_cli.sh
-
-	readme.gentoo_create_doc
-	dodoc ChangeLog {eap_testing,todo}.txt README{,-WPS} \
-		wpa_supplicant.conf
-
-	newdoc .config build-config
-
-	if [ "${PV}" != "9999" ]; then
-		doman doc/docbook/*.{5,8}
-	fi
-
-	if use qt5 ; then
-		into /usr
-		dobin wpa_gui-qt4/wpa_gui
-		doicon wpa_gui-qt4/icons/wpa_gui.svg
-		domenu wpa_gui-qt4/wpa_gui.desktop
-	else
-		rm "${ED}"/usr/share/man/man8/wpa_gui.8
-	fi
-
-	use wimax && emake DESTDIR="${D}" -C ../src/eap_peer install
-
-	if use dbus ; then
-		pushd "${S}"/dbus > /dev/null || die
-		insinto /etc/dbus-1/system.d
-		newins dbus-wpa_supplicant.conf wpa_supplicant.conf
-		insinto /usr/share/dbus-1/system-services
-		doins fi.w1.wpa_supplicant1.service
-		popd > /dev/null || die
-
-		# This unit relies on dbus support, bug 538600.
-		systemd_dounit systemd/wpa_supplicant.service
-	fi
-
-	if use eapol-test ; then
-		dobin eapol_test
-	fi
-
-	systemd_dounit "systemd/wpa_supplicant@.service"
-	systemd_dounit "systemd/wpa_supplicant-nl80211@.service"
-	systemd_dounit "systemd/wpa_supplicant-wired@.service"
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-
-	if [[ -e "${EROOT}"/etc/wpa_supplicant.conf ]] ; then
-		echo
-		ewarn "WARNING: your old configuration file ${EROOT}/etc/wpa_supplicant.conf"
-		ewarn "needs to be moved to ${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf"
-	fi
-	if ! use wep; then
-		einfo "WARNING: You are building with WEP support disabled, which is recommended since"
-		einfo "this protocol is deprecated and insecure.  If you still need to connect to"
-		einfo "WEP-enabled networks, you may turn this flag back on.  With this flag off,"
-		einfo "WEP-enabled networks will not even show up as available."
-		einfo "If your network is missing you may wish to USE=wep"
-	fi
-	if ! use tkip; then
-		ewarn "WARNING: You are building with TKIP support disabled, which is recommended since"
-		ewarn "this protocol is deprecated and insecure.  If you still need to connect to"
-		ewarn "TKIP-enabled networks, you may turn this flag back on.  With this flag off,"
-		ewarn "TKIP-enabled networks, including mixed mode TKIP/AES-CCMP will not even show up"
-		ewarn "as available.  If your network is missing you may wish to USE=tkip"
-	fi
-
-	# Mea culpa, feel free to remove that after some time --mgorny.
-	local fn
-	for fn in wpa_supplicant{,@wlan0}.service; do
-		if [[ -e "${EROOT}"/etc/systemd/system/network.target.wants/${fn} ]]
-		then
-			ebegin "Moving ${fn} to multi-user.target"
-			mv "${EROOT}"/etc/systemd/system/network.target.wants/${fn} \
-				"${EROOT}"/etc/systemd/system/multi-user.target.wants/ || die
-			eend ${?} \
-				"Please try to re-enable ${fn}"
-		fi
-	done
-
-	systemd_reenable wpa_supplicant.service
-}

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r2.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r2.ebuild
deleted file mode 100644
index 29a723e..0000000
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r2.ebuild
+++ /dev/null
@@ -1,486 +0,0 @@
-# Copyright 1999-2023 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-inherit desktop linux-info qmake-utils readme.gentoo-r1 systemd toolchain-funcs
-
-DESCRIPTION="IEEE 802.1X/WPA supplicant for secure wireless transfers"
-HOMEPAGE="https://w1.fi/wpa_supplicant/"
-LICENSE="|| ( GPL-2 BSD )"
-
-if [ "${PV}" = "9999" ]; then
-	inherit git-r3
-	EGIT_REPO_URI="https://w1.fi/hostap.git"
-else
-	KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~ia64 ~loong ~mips ~ppc ~ppc64 ~riscv ~sparc ~x86"
-	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
-fi
-
-SLOT="0"
-IUSE="ap broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls tkip uncommon-eap-types wep wimax wps"
-
-# CONFIG_PRIVSEP=y does not have sufficient support for the new driver
-# interface functions used for MACsec, so this combination cannot be used
-# at least for now. bug #684442
-REQUIRED_USE="
-	macsec? ( !privsep )
-	privsep? ( !macsec )
-	broadcom-sta? ( !fils !mesh !mbo )
-"
-
-DEPEND="
-	>=dev-libs/openssl-1.0.2k:=
-	dbus? ( sys-apps/dbus )
-	kernel_linux? (
-		>=dev-libs/libnl-3.2:3
-		eap-sim? ( sys-apps/pcsc-lite )
-	)
-	!kernel_linux? ( net-libs/libpcap )
-	qt5? (
-		dev-qt/qtcore:5
-		dev-qt/qtgui:5
-		dev-qt/qtsvg:5
-		dev-qt/qtwidgets:5
-	)
-	readline? (
-		sys-libs/ncurses:0=
-		sys-libs/readline:0=
-	)
-"
-RDEPEND="${DEPEND}
-	selinux? ( sec-policy/selinux-networkmanager )
-	kernel_linux? (
-		net-wireless/wireless-regdb
-	)
-"
-BDEPEND="virtual/pkgconfig"
-
-DOC_CONTENTS="
-	If this is a clean installation of wpa_supplicant, you
-	have to create a configuration file named
-	${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf
-	An example configuration file is available for reference in
-	${EROOT}/usr/share/doc/${PF}/
-"
-
-S="${WORKDIR}/${P}/${PN}"
-
-Kconfig_style_config() {
-		#param 1 is CONFIG_* item
-		#param 2 is what to set it = to, defaulting in y
-		CONFIG_PARAM="${CONFIG_HEADER:-CONFIG_}$1"
-		setting="${2:-y}"
-
-		if [ ! $setting = n ]; then
-			#first remove any leading "# " if $2 is not n
-			sed -i "/^# *$CONFIG_PARAM=/s/^# *//" .config || echo "Kconfig_style_config error uncommenting $CONFIG_PARAM"
-			#set item = $setting (defaulting to y)
-			if ! sed -i "/^$CONFIG_PARAM\>/s/=.*/=$setting/" .config; then
-				echo "Kconfig_style_config error setting $CONFIG_PARAM=$setting"
-			fi
-			if [ -z "$( grep ^$CONFIG_PARAM= .config )" ] ; then
-				echo "$CONFIG_PARAM=$setting" >>.config
-			fi
-		else
-			#ensure item commented out
-			if ! sed -i "/^$CONFIG_PARAM\>/s/$CONFIG_PARAM/# $CONFIG_PARAM/" .config; then
-				echo "Kconfig_style_config error commenting $CONFIG_PARAM"
-			fi
-		fi
-}
-
-src_prepare() {
-	default
-
-	# net/bpf.h needed for net-libs/libpcap on Gentoo/FreeBSD
-	sed -i \
-		-e "s:\(#include <pcap\.h>\):#include <net/bpf.h>\n\1:" \
-		../src/l2_packet/l2_packet_freebsd.c || die
-
-	# Change configuration to match Gentoo locations (bug #143750)
-	sed -i \
-		-e "s:/usr/lib/opensc:/usr/$(get_libdir):" \
-		-e "s:/usr/lib/pkcs11:/usr/$(get_libdir):" \
-		wpa_supplicant.conf || die
-
-	# systemd entries to D-Bus service files (bug #372877)
-	echo 'SystemdService=wpa_supplicant.service' \
-		| tee -a dbus/*.service >/dev/null || die
-
-	cd "${WORKDIR}/${P}" || die
-
-	if use wimax; then
-		# generate-libeap-peer.patch comes before
-		# fix-undefined-reference-to-random_get_bytes.patch
-		eapply "${FILESDIR}/${P}-generate-libeap-peer.patch"
-
-		# multilib-strict fix (bug #373685)
-		sed -e "s/\/usr\/lib/\/usr\/$(get_libdir)/" -i src/eap_peer/Makefile || die
-	fi
-
-	# bug (320097)
-	eapply "${FILESDIR}/${PN}-2.6-do-not-call-dbus-functions-with-NULL-path.patch"
-
-	# bug (640492)
-	sed -i 's#-Werror ##' wpa_supplicant/Makefile || die
-
-	# LibreSSL patch (https://github.com/gentoo/libressl/issues/336)
-	eapply "${FILESDIR}/${PN}-2.9-libressl.patch"
-}
-
-src_configure() {
-	# Toolchain setup
-	tc-export CC PKG_CONFIG
-
-	cp defconfig .config || die
-
-	# Basic setup
-	Kconfig_style_config CTRL_IFACE
-	Kconfig_style_config MATCH_IFACE
-	Kconfig_style_config BACKEND file
-	Kconfig_style_config IBSS_RSN
-	Kconfig_style_config IEEE80211W
-	Kconfig_style_config IEEE80211R
-	Kconfig_style_config HT_OVERRIDES
-	Kconfig_style_config VHT_OVERRIDES
-	Kconfig_style_config OCV
-	Kconfig_style_config TLSV11
-	Kconfig_style_config TLSV12
-	Kconfig_style_config GETRANDOM
-
-	# Basic authentication methods
-	# NOTE: we don't set GPSK or SAKE as they conflict
-	# with the below options
-	Kconfig_style_config EAP_GTC
-	Kconfig_style_config EAP_MD5
-	Kconfig_style_config EAP_OTP
-	Kconfig_style_config EAP_PAX
-	Kconfig_style_config EAP_PSK
-	Kconfig_style_config EAP_TLV
-	Kconfig_style_config EAP_EXE
-	Kconfig_style_config IEEE8021X_EAPOL
-	Kconfig_style_config PKCS12
-	Kconfig_style_config PEERKEY
-	Kconfig_style_config EAP_LEAP
-	Kconfig_style_config EAP_MSCHAPV2
-	Kconfig_style_config EAP_PEAP
-	Kconfig_style_config EAP_TEAP
-	Kconfig_style_config EAP_TLS
-	Kconfig_style_config EAP_TTLS
-
-	# Enabling background scanning.
-	Kconfig_style_config BGSCAN_SIMPLE
-	Kconfig_style_config BGSCAN_LEARN
-
-	if use dbus ; then
-		Kconfig_style_config CTRL_IFACE_DBUS
-		Kconfig_style_config CTRL_IFACE_DBUS_NEW
-		Kconfig_style_config CTRL_IFACE_DBUS_INTRO
-	else
-		Kconfig_style_config CTRL_IFACE_DBUS n
-		Kconfig_style_config CTRL_IFACE_DBUS_NEW n
-		Kconfig_style_config CTRL_IFACE_DBUS_INTRO n
-	fi
-
-	if use eapol-test ; then
-		Kconfig_style_config EAPOL_TEST
-	fi
-
-	# Enable support for writing debug info to a log file and syslog.
-	Kconfig_style_config DEBUG_FILE
-	Kconfig_style_config DEBUG_SYSLOG
-
-	if use hs2-0 ; then
-		Kconfig_style_config INTERWORKING
-		Kconfig_style_config HS20
-	fi
-
-	if use mbo ; then
-		Kconfig_style_config MBO
-	else
-		Kconfig_style_config MBO n
-	fi
-
-	if use uncommon-eap-types; then
-		Kconfig_style_config EAP_GPSK
-		Kconfig_style_config EAP_SAKE
-		Kconfig_style_config EAP_GPSK_SHA256
-		Kconfig_style_config EAP_IKEV2
-		Kconfig_style_config EAP_EKE
-	fi
-
-	if use eap-sim ; then
-		# Smart card authentication
-		Kconfig_style_config EAP_SIM
-		Kconfig_style_config EAP_AKA
-		Kconfig_style_config EAP_AKA_PRIME
-		Kconfig_style_config PCSC
-	fi
-
-	if use fasteap ; then
-		Kconfig_style_config EAP_FAST
-	fi
-
-	if use readline ; then
-		# readline/history support for wpa_cli
-		Kconfig_style_config READLINE
-	else
-		#internal line edit mode for wpa_cli
-		Kconfig_style_config WPA_CLI_EDIT
-	fi
-
-	Kconfig_style_config TLS openssl
-	Kconfig_style_config FST
-
-	Kconfig_style_config EAP_PWD
-	if use fils; then
-		Kconfig_style_config FILS
-		Kconfig_style_config FILS_SK_PFS
-	fi
-	if use mesh; then
-		Kconfig_style_config MESH
-	else
-		Kconfig_style_config MESH n
-	fi
-	# WPA3
-	Kconfig_style_config OWE
-	Kconfig_style_config SAE
-	Kconfig_style_config DPP
-	Kconfig_style_config DPP2
-	Kconfig_style_config SUITEB192
-	Kconfig_style_config SUITEB
-
-	if use wep ; then
-		Kconfig_style_config WEP
-	else
-		Kconfig_style_config WEP n
-	fi
-
-	# Watch out, reversed logic
-	if use tkip ; then
-		Kconfig_style_config NO_TKIP n
-	else
-		Kconfig_style_config NO_TKIP
-	fi
-
-	if use smartcard ; then
-		Kconfig_style_config SMARTCARD
-	else
-		Kconfig_style_config SMARTCARD n
-	fi
-
-	if use tdls ; then
-		Kconfig_style_config TDLS
-	fi
-
-	if use kernel_linux ; then
-		# Linux specific drivers
-		Kconfig_style_config DRIVER_ATMEL
-		Kconfig_style_config DRIVER_HOSTAP
-		Kconfig_style_config DRIVER_IPW
-		Kconfig_style_config DRIVER_NL80211
-		Kconfig_style_config DRIVER_RALINK
-		Kconfig_style_config DRIVER_WEXT
-		Kconfig_style_config DRIVER_WIRED
-
-		if use macsec ; then
-			#requires something, no idea what
-			#Kconfig_style_config DRIVER_MACSEC_QCA
-			Kconfig_style_config DRIVER_MACSEC_LINUX
-			Kconfig_style_config MACSEC
-		else
-			# bug #831369 and bug #684442
-			Kconfig_style_config DRIVER_MACSEC_LINUX n
-			Kconfig_style_config MACSEC n
-		fi
-
-		if use ps3 ; then
-			Kconfig_style_config DRIVER_PS3
-		fi
-	fi
-
-	# Wi-Fi Protected Setup (WPS)
-	if use wps ; then
-		Kconfig_style_config WPS
-		Kconfig_style_config WPS2
-		# USB Flash Drive
-		Kconfig_style_config WPS_UFD
-		# External Registrar
-		Kconfig_style_config WPS_ER
-		# Universal Plug'n'Play
-		Kconfig_style_config WPS_UPNP
-		# Near Field Communication
-		Kconfig_style_config WPS_NFC
-	else
-		Kconfig_style_config WPS n
-		Kconfig_style_config WPS2 n
-		Kconfig_style_config WPS_UFD n
-		Kconfig_style_config WPS_ER n
-		Kconfig_style_config WPS_UPNP n
-		Kconfig_style_config WPS_NFC n
-	fi
-
-	# Wi-Fi Direct (WiDi)
-	if use p2p ; then
-		Kconfig_style_config P2P
-		Kconfig_style_config WIFI_DISPLAY
-	else
-		Kconfig_style_config P2P n
-		Kconfig_style_config WIFI_DISPLAY n
-	fi
-
-	# Access Point Mode
-	if use ap ; then
-		Kconfig_style_config AP
-	else
-		Kconfig_style_config AP n
-	fi
-
-	# Enable essentials for AP/P2P
-	if use ap || use p2p ; then
-		# Enabling HT support (802.11n)
-		Kconfig_style_config IEEE80211N
-
-		# Enabling VHT support (802.11ac)
-		Kconfig_style_config IEEE80211AC
-	fi
-
-	# Enable mitigation against certain attacks against TKIP
-	Kconfig_style_config DELAYED_MIC_ERROR_REPORT
-
-	if use privsep ; then
-		Kconfig_style_config PRIVSEP
-	fi
-
-	if use kernel_linux ; then
-		Kconfig_style_config LIBNL32
-	fi
-
-	if use qt5 ; then
-		pushd "${S}"/wpa_gui-qt4 > /dev/null || die
-		eqmake5 wpa_gui.pro
-		popd > /dev/null || die
-	fi
-}
-
-src_compile() {
-	einfo "Building wpa_supplicant"
-	emake V=1 BINDIR=/usr/sbin
-
-	if use wimax; then
-		emake -C ../src/eap_peer clean
-		emake -C ../src/eap_peer
-	fi
-
-	if use qt5; then
-		einfo "Building wpa_gui"
-		emake -C "${S}"/wpa_gui-qt4
-	fi
-
-	if use eapol-test ; then
-		emake eapol_test
-	fi
-}
-
-src_install() {
-	dosbin wpa_supplicant
-	use privsep && dosbin wpa_priv
-	dobin wpa_cli wpa_passphrase
-
-	# baselayout-1 compat
-	if has_version "<sys-apps/baselayout-2.0.0"; then
-		dodir /sbin
-		dosym ../usr/sbin/wpa_supplicant /sbin/wpa_supplicant
-		dodir /bin
-		dosym ../usr/bin/wpa_cli /bin/wpa_cli
-	fi
-
-	if has_version ">=sys-apps/openrc-0.5.0"; then
-		newinitd "${FILESDIR}/${PN}-init.d" wpa_supplicant
-		newconfd "${FILESDIR}/${PN}-conf.d" wpa_supplicant
-	fi
-
-	exeinto /etc/wpa_supplicant/
-	newexe "${FILESDIR}/wpa_cli.sh" wpa_cli.sh
-
-	readme.gentoo_create_doc
-	dodoc ChangeLog {eap_testing,todo}.txt README{,-WPS} \
-		wpa_supplicant.conf
-
-	newdoc .config build-config
-
-	if [ "${PV}" != "9999" ]; then
-		doman doc/docbook/*.{5,8}
-	fi
-
-	if use qt5 ; then
-		into /usr
-		dobin wpa_gui-qt4/wpa_gui
-		doicon wpa_gui-qt4/icons/wpa_gui.svg
-		domenu wpa_gui-qt4/wpa_gui.desktop
-	else
-		rm "${ED}"/usr/share/man/man8/wpa_gui.8
-	fi
-
-	use wimax && emake DESTDIR="${D}" -C ../src/eap_peer install
-
-	if use dbus ; then
-		pushd "${S}"/dbus > /dev/null || die
-		insinto /etc/dbus-1/system.d
-		newins dbus-wpa_supplicant.conf wpa_supplicant.conf
-		insinto /usr/share/dbus-1/system-services
-		doins fi.w1.wpa_supplicant1.service
-		popd > /dev/null || die
-
-		# This unit relies on dbus support, bug 538600.
-		systemd_dounit systemd/wpa_supplicant.service
-	fi
-
-	if use eapol-test ; then
-		dobin eapol_test
-	fi
-
-	systemd_dounit "systemd/wpa_supplicant@.service"
-	systemd_dounit "systemd/wpa_supplicant-nl80211@.service"
-	systemd_dounit "systemd/wpa_supplicant-wired@.service"
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-
-	if [[ -e "${EROOT}"/etc/wpa_supplicant.conf ]] ; then
-		echo
-		ewarn "WARNING: your old configuration file ${EROOT}/etc/wpa_supplicant.conf"
-		ewarn "needs to be moved to ${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf"
-	fi
-	if ! use wep; then
-		einfo "WARNING: You are building with WEP support disabled, which is recommended since"
-		einfo "this protocol is deprecated and insecure.  If you still need to connect to"
-		einfo "WEP-enabled networks, you may turn this flag back on.  With this flag off,"
-		einfo "WEP-enabled networks will not even show up as available."
-		einfo "If your network is missing you may wish to USE=wep"
-	fi
-	if ! use tkip; then
-		ewarn "WARNING: You are building with TKIP support disabled, which is recommended since"
-		ewarn "this protocol is deprecated and insecure.  If you still need to connect to"
-		ewarn "TKIP-enabled networks, you may turn this flag back on.  With this flag off,"
-		ewarn "TKIP-enabled networks, including mixed mode TKIP/AES-CCMP will not even show up"
-		ewarn "as available.  If your network is missing you may wish to USE=tkip"
-	fi
-
-	# Mea culpa, feel free to remove that after some time --mgorny.
-	local fn
-	for fn in wpa_supplicant{,@wlan0}.service; do
-		if [[ -e "${EROOT}"/etc/systemd/system/network.target.wants/${fn} ]]
-		then
-			ebegin "Moving ${fn} to multi-user.target"
-			mv "${EROOT}"/etc/systemd/system/network.target.wants/${fn} \
-				"${EROOT}"/etc/systemd/system/multi-user.target.wants/ || die
-			eend ${?} \
-				"Please try to re-enable ${fn}"
-		fi
-	done
-
-	systemd_reenable wpa_supplicant.service
-}

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r3.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r3.ebuild
deleted file mode 100644
index 297b9cb..0000000
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r3.ebuild
+++ /dev/null
@@ -1,490 +0,0 @@
-# Copyright 1999-2023 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-inherit desktop linux-info qmake-utils readme.gentoo-r1 systemd toolchain-funcs
-
-DESCRIPTION="IEEE 802.1X/WPA supplicant for secure wireless transfers"
-HOMEPAGE="https://w1.fi/wpa_supplicant/"
-LICENSE="|| ( GPL-2 BSD )"
-
-if [ "${PV}" = "9999" ]; then
-	inherit git-r3
-	EGIT_REPO_URI="https://w1.fi/hostap.git"
-else
-	KEYWORDS="~alpha amd64 arm arm64 ~ia64 ~loong ~mips ppc ppc64 ~riscv ~sparc x86"
-	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
-fi
-
-SLOT="0"
-IUSE="ap broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls tkip uncommon-eap-types wep wimax wps"
-
-# CONFIG_PRIVSEP=y does not have sufficient support for the new driver
-# interface functions used for MACsec, so this combination cannot be used
-# at least for now. bug #684442
-REQUIRED_USE="
-	macsec? ( !privsep )
-	privsep? ( !macsec )
-	broadcom-sta? ( !fils !mesh !mbo )
-"
-
-DEPEND="
-	>=dev-libs/openssl-1.0.2k:=
-	dbus? ( sys-apps/dbus )
-	kernel_linux? (
-		>=dev-libs/libnl-3.2:3
-		eap-sim? ( sys-apps/pcsc-lite )
-	)
-	!kernel_linux? ( net-libs/libpcap )
-	qt5? (
-		dev-qt/qtcore:5
-		dev-qt/qtgui:5
-		dev-qt/qtsvg:5
-		dev-qt/qtwidgets:5
-	)
-	readline? (
-		sys-libs/ncurses:0=
-		sys-libs/readline:0=
-	)
-"
-RDEPEND="${DEPEND}
-	selinux? ( sec-policy/selinux-networkmanager )
-	kernel_linux? (
-		net-wireless/wireless-regdb
-	)
-"
-BDEPEND="virtual/pkgconfig"
-
-DOC_CONTENTS="
-	If this is a clean installation of wpa_supplicant, you
-	have to create a configuration file named
-	${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf
-	An example configuration file is available for reference in
-	${EROOT}/usr/share/doc/${PF}/
-"
-
-S="${WORKDIR}/${P}/${PN}"
-
-Kconfig_style_config() {
-		#param 1 is CONFIG_* item
-		#param 2 is what to set it = to, defaulting in y
-		CONFIG_PARAM="${CONFIG_HEADER:-CONFIG_}$1"
-		setting="${2:-y}"
-
-		if [ ! $setting = n ]; then
-			#first remove any leading "# " if $2 is not n
-			sed -i "/^# *$CONFIG_PARAM=/s/^# *//" .config || echo "Kconfig_style_config error uncommenting $CONFIG_PARAM"
-			#set item = $setting (defaulting to y)
-			if ! sed -i "/^$CONFIG_PARAM\>/s/=.*/=$setting/" .config; then
-				echo "Kconfig_style_config error setting $CONFIG_PARAM=$setting"
-			fi
-			if [ -z "$( grep ^$CONFIG_PARAM= .config )" ] ; then
-				echo "$CONFIG_PARAM=$setting" >>.config
-			fi
-		else
-			#ensure item commented out
-			if ! sed -i "/^$CONFIG_PARAM\>/s/$CONFIG_PARAM/# $CONFIG_PARAM/" .config; then
-				echo "Kconfig_style_config error commenting $CONFIG_PARAM"
-			fi
-		fi
-}
-
-src_prepare() {
-	default
-
-	# net/bpf.h needed for net-libs/libpcap on Gentoo/FreeBSD
-	sed -i \
-		-e "s:\(#include <pcap\.h>\):#include <net/bpf.h>\n\1:" \
-		../src/l2_packet/l2_packet_freebsd.c || die
-
-	# Change configuration to match Gentoo locations (bug #143750)
-	sed -i \
-		-e "s:/usr/lib/opensc:/usr/$(get_libdir):" \
-		-e "s:/usr/lib/pkcs11:/usr/$(get_libdir):" \
-		wpa_supplicant.conf || die
-
-	# systemd entries to D-Bus service files (bug #372877)
-	echo 'SystemdService=wpa_supplicant.service' \
-		| tee -a dbus/*.service >/dev/null || die
-
-	cd "${WORKDIR}/${P}" || die
-
-	if use wimax; then
-		# generate-libeap-peer.patch comes before
-		# fix-undefined-reference-to-random_get_bytes.patch
-		eapply "${FILESDIR}/${P}-generate-libeap-peer.patch"
-
-		# multilib-strict fix (bug #373685)
-		sed -e "s/\/usr\/lib/\/usr\/$(get_libdir)/" -i src/eap_peer/Makefile || die
-	fi
-
-	# bug (320097)
-	eapply "${FILESDIR}/${PN}-2.6-do-not-call-dbus-functions-with-NULL-path.patch"
-
-	# bug (912315)
-	eapply "${FILESDIR}/${PN}-2.10-allow-legacy-renegotiation.patch"
-	eapply "${FILESDIR}/${P}-Drop-security-level-to-0-with-OpenSSL-3.0-wh.patch"
-
-	# bug (640492)
-	sed -i 's#-Werror ##' wpa_supplicant/Makefile || die
-
-	# LibreSSL patch (https://github.com/gentoo/libressl/issues/336)
-	eapply "${FILESDIR}/${PN}-2.9-libressl.patch"
-}
-
-src_configure() {
-	# Toolchain setup
-	tc-export CC PKG_CONFIG
-
-	cp defconfig .config || die
-
-	# Basic setup
-	Kconfig_style_config CTRL_IFACE
-	Kconfig_style_config MATCH_IFACE
-	Kconfig_style_config BACKEND file
-	Kconfig_style_config IBSS_RSN
-	Kconfig_style_config IEEE80211W
-	Kconfig_style_config IEEE80211R
-	Kconfig_style_config HT_OVERRIDES
-	Kconfig_style_config VHT_OVERRIDES
-	Kconfig_style_config OCV
-	Kconfig_style_config TLSV11
-	Kconfig_style_config TLSV12
-	Kconfig_style_config GETRANDOM
-
-	# Basic authentication methods
-	# NOTE: we don't set GPSK or SAKE as they conflict
-	# with the below options
-	Kconfig_style_config EAP_GTC
-	Kconfig_style_config EAP_MD5
-	Kconfig_style_config EAP_OTP
-	Kconfig_style_config EAP_PAX
-	Kconfig_style_config EAP_PSK
-	Kconfig_style_config EAP_TLV
-	Kconfig_style_config EAP_EXE
-	Kconfig_style_config IEEE8021X_EAPOL
-	Kconfig_style_config PKCS12
-	Kconfig_style_config PEERKEY
-	Kconfig_style_config EAP_LEAP
-	Kconfig_style_config EAP_MSCHAPV2
-	Kconfig_style_config EAP_PEAP
-	Kconfig_style_config EAP_TEAP
-	Kconfig_style_config EAP_TLS
-	Kconfig_style_config EAP_TTLS
-
-	# Enabling background scanning.
-	Kconfig_style_config BGSCAN_SIMPLE
-	Kconfig_style_config BGSCAN_LEARN
-
-	if use dbus ; then
-		Kconfig_style_config CTRL_IFACE_DBUS
-		Kconfig_style_config CTRL_IFACE_DBUS_NEW
-		Kconfig_style_config CTRL_IFACE_DBUS_INTRO
-	else
-		Kconfig_style_config CTRL_IFACE_DBUS n
-		Kconfig_style_config CTRL_IFACE_DBUS_NEW n
-		Kconfig_style_config CTRL_IFACE_DBUS_INTRO n
-	fi
-
-	if use eapol-test ; then
-		Kconfig_style_config EAPOL_TEST
-	fi
-
-	# Enable support for writing debug info to a log file and syslog.
-	Kconfig_style_config DEBUG_FILE
-	Kconfig_style_config DEBUG_SYSLOG
-
-	if use hs2-0 ; then
-		Kconfig_style_config INTERWORKING
-		Kconfig_style_config HS20
-	fi
-
-	if use mbo ; then
-		Kconfig_style_config MBO
-	else
-		Kconfig_style_config MBO n
-	fi
-
-	if use uncommon-eap-types; then
-		Kconfig_style_config EAP_GPSK
-		Kconfig_style_config EAP_SAKE
-		Kconfig_style_config EAP_GPSK_SHA256
-		Kconfig_style_config EAP_IKEV2
-		Kconfig_style_config EAP_EKE
-	fi
-
-	if use eap-sim ; then
-		# Smart card authentication
-		Kconfig_style_config EAP_SIM
-		Kconfig_style_config EAP_AKA
-		Kconfig_style_config EAP_AKA_PRIME
-		Kconfig_style_config PCSC
-	fi
-
-	if use fasteap ; then
-		Kconfig_style_config EAP_FAST
-	fi
-
-	if use readline ; then
-		# readline/history support for wpa_cli
-		Kconfig_style_config READLINE
-	else
-		#internal line edit mode for wpa_cli
-		Kconfig_style_config WPA_CLI_EDIT
-	fi
-
-	Kconfig_style_config TLS openssl
-	Kconfig_style_config FST
-
-	Kconfig_style_config EAP_PWD
-	if use fils; then
-		Kconfig_style_config FILS
-		Kconfig_style_config FILS_SK_PFS
-	fi
-	if use mesh; then
-		Kconfig_style_config MESH
-	else
-		Kconfig_style_config MESH n
-	fi
-	# WPA3
-	Kconfig_style_config OWE
-	Kconfig_style_config SAE
-	Kconfig_style_config DPP
-	Kconfig_style_config DPP2
-	Kconfig_style_config SUITEB192
-	Kconfig_style_config SUITEB
-
-	if use wep ; then
-		Kconfig_style_config WEP
-	else
-		Kconfig_style_config WEP n
-	fi
-
-	# Watch out, reversed logic
-	if use tkip ; then
-		Kconfig_style_config NO_TKIP n
-	else
-		Kconfig_style_config NO_TKIP
-	fi
-
-	if use smartcard ; then
-		Kconfig_style_config SMARTCARD
-	else
-		Kconfig_style_config SMARTCARD n
-	fi
-
-	if use tdls ; then
-		Kconfig_style_config TDLS
-	fi
-
-	if use kernel_linux ; then
-		# Linux specific drivers
-		Kconfig_style_config DRIVER_ATMEL
-		Kconfig_style_config DRIVER_HOSTAP
-		Kconfig_style_config DRIVER_IPW
-		Kconfig_style_config DRIVER_NL80211
-		Kconfig_style_config DRIVER_RALINK
-		Kconfig_style_config DRIVER_WEXT
-		Kconfig_style_config DRIVER_WIRED
-
-		if use macsec ; then
-			#requires something, no idea what
-			#Kconfig_style_config DRIVER_MACSEC_QCA
-			Kconfig_style_config DRIVER_MACSEC_LINUX
-			Kconfig_style_config MACSEC
-		else
-			# bug #831369 and bug #684442
-			Kconfig_style_config DRIVER_MACSEC_LINUX n
-			Kconfig_style_config MACSEC n
-		fi
-
-		if use ps3 ; then
-			Kconfig_style_config DRIVER_PS3
-		fi
-	fi
-
-	# Wi-Fi Protected Setup (WPS)
-	if use wps ; then
-		Kconfig_style_config WPS
-		Kconfig_style_config WPS2
-		# USB Flash Drive
-		Kconfig_style_config WPS_UFD
-		# External Registrar
-		Kconfig_style_config WPS_ER
-		# Universal Plug'n'Play
-		Kconfig_style_config WPS_UPNP
-		# Near Field Communication
-		Kconfig_style_config WPS_NFC
-	else
-		Kconfig_style_config WPS n
-		Kconfig_style_config WPS2 n
-		Kconfig_style_config WPS_UFD n
-		Kconfig_style_config WPS_ER n
-		Kconfig_style_config WPS_UPNP n
-		Kconfig_style_config WPS_NFC n
-	fi
-
-	# Wi-Fi Direct (WiDi)
-	if use p2p ; then
-		Kconfig_style_config P2P
-		Kconfig_style_config WIFI_DISPLAY
-	else
-		Kconfig_style_config P2P n
-		Kconfig_style_config WIFI_DISPLAY n
-	fi
-
-	# Access Point Mode
-	if use ap ; then
-		Kconfig_style_config AP
-	else
-		Kconfig_style_config AP n
-	fi
-
-	# Enable essentials for AP/P2P
-	if use ap || use p2p ; then
-		# Enabling HT support (802.11n)
-		Kconfig_style_config IEEE80211N
-
-		# Enabling VHT support (802.11ac)
-		Kconfig_style_config IEEE80211AC
-	fi
-
-	# Enable mitigation against certain attacks against TKIP
-	Kconfig_style_config DELAYED_MIC_ERROR_REPORT
-
-	if use privsep ; then
-		Kconfig_style_config PRIVSEP
-	fi
-
-	if use kernel_linux ; then
-		Kconfig_style_config LIBNL32
-	fi
-
-	if use qt5 ; then
-		pushd "${S}"/wpa_gui-qt4 > /dev/null || die
-		eqmake5 wpa_gui.pro
-		popd > /dev/null || die
-	fi
-}
-
-src_compile() {
-	einfo "Building wpa_supplicant"
-	emake V=1 BINDIR=/usr/sbin
-
-	if use wimax; then
-		emake -C ../src/eap_peer clean
-		emake -C ../src/eap_peer
-	fi
-
-	if use qt5; then
-		einfo "Building wpa_gui"
-		emake -C "${S}"/wpa_gui-qt4
-	fi
-
-	if use eapol-test ; then
-		emake eapol_test
-	fi
-}
-
-src_install() {
-	dosbin wpa_supplicant
-	use privsep && dosbin wpa_priv
-	dobin wpa_cli wpa_passphrase
-
-	# baselayout-1 compat
-	if has_version "<sys-apps/baselayout-2.0.0"; then
-		dodir /sbin
-		dosym ../usr/sbin/wpa_supplicant /sbin/wpa_supplicant
-		dodir /bin
-		dosym ../usr/bin/wpa_cli /bin/wpa_cli
-	fi
-
-	if has_version ">=sys-apps/openrc-0.5.0"; then
-		newinitd "${FILESDIR}/${PN}-init.d" wpa_supplicant
-		newconfd "${FILESDIR}/${PN}-conf.d" wpa_supplicant
-	fi
-
-	exeinto /etc/wpa_supplicant/
-	newexe "${FILESDIR}/wpa_cli.sh" wpa_cli.sh
-
-	readme.gentoo_create_doc
-	dodoc ChangeLog {eap_testing,todo}.txt README{,-WPS} \
-		wpa_supplicant.conf
-
-	newdoc .config build-config
-
-	if [ "${PV}" != "9999" ]; then
-		doman doc/docbook/*.{5,8}
-	fi
-
-	if use qt5 ; then
-		into /usr
-		dobin wpa_gui-qt4/wpa_gui
-		doicon wpa_gui-qt4/icons/wpa_gui.svg
-		domenu wpa_gui-qt4/wpa_gui.desktop
-	else
-		rm "${ED}"/usr/share/man/man8/wpa_gui.8
-	fi
-
-	use wimax && emake DESTDIR="${D}" -C ../src/eap_peer install
-
-	if use dbus ; then
-		pushd "${S}"/dbus > /dev/null || die
-		insinto /etc/dbus-1/system.d
-		newins dbus-wpa_supplicant.conf wpa_supplicant.conf
-		insinto /usr/share/dbus-1/system-services
-		doins fi.w1.wpa_supplicant1.service
-		popd > /dev/null || die
-
-		# This unit relies on dbus support, bug 538600.
-		systemd_dounit systemd/wpa_supplicant.service
-	fi
-
-	if use eapol-test ; then
-		dobin eapol_test
-	fi
-
-	systemd_dounit "systemd/wpa_supplicant@.service"
-	systemd_dounit "systemd/wpa_supplicant-nl80211@.service"
-	systemd_dounit "systemd/wpa_supplicant-wired@.service"
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-
-	if [[ -e "${EROOT}"/etc/wpa_supplicant.conf ]] ; then
-		echo
-		ewarn "WARNING: your old configuration file ${EROOT}/etc/wpa_supplicant.conf"
-		ewarn "needs to be moved to ${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf"
-	fi
-	if ! use wep; then
-		einfo "WARNING: You are building with WEP support disabled, which is recommended since"
-		einfo "this protocol is deprecated and insecure.  If you still need to connect to"
-		einfo "WEP-enabled networks, you may turn this flag back on.  With this flag off,"
-		einfo "WEP-enabled networks will not even show up as available."
-		einfo "If your network is missing you may wish to USE=wep"
-	fi
-	if ! use tkip; then
-		ewarn "WARNING: You are building with TKIP support disabled, which is recommended since"
-		ewarn "this protocol is deprecated and insecure.  If you still need to connect to"
-		ewarn "TKIP-enabled networks, you may turn this flag back on.  With this flag off,"
-		ewarn "TKIP-enabled networks, including mixed mode TKIP/AES-CCMP will not even show up"
-		ewarn "as available.  If your network is missing you may wish to USE=tkip"
-	fi
-
-	# Mea culpa, feel free to remove that after some time --mgorny.
-	local fn
-	for fn in wpa_supplicant{,@wlan0}.service; do
-		if [[ -e "${EROOT}"/etc/systemd/system/network.target.wants/${fn} ]]
-		then
-			ebegin "Moving ${fn} to multi-user.target"
-			mv "${EROOT}"/etc/systemd/system/network.target.wants/${fn} \
-				"${EROOT}"/etc/systemd/system/multi-user.target.wants/ || die
-			eend ${?} \
-				"Please try to re-enable ${fn}"
-		fi
-	done
-
-	systemd_reenable wpa_supplicant.service
-}


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2024-03-10  7:27 orbea
  0 siblings, 0 replies; 19+ messages in thread
From: orbea @ 2024-03-10  7:27 UTC (permalink / raw
  To: gentoo-commits

commit:     8a8011944a444ea8d6948d00184b6e5a95cfc747
Author:     orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Sun Mar 10 07:25:49 2024 +0000
Commit:     orbea <orbea <AT> riseup <DOT> net>
CommitDate: Sun Mar 10 07:25:49 2024 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=8a801194

net-wireless/wpa_supplicant: add 2.10-r4

Signed-off-by: orbea <orbea <AT> riseup.net>

 .../wpa_supplicant/wpa_supplicant-2.10-r4.ebuild   | 480 +++++++++++++++++++++
 1 file changed, 480 insertions(+)

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild
new file mode 100644
index 0000000..03b32ce
--- /dev/null
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r4.ebuild
@@ -0,0 +1,480 @@
+# Copyright 1999-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit desktop linux-info qmake-utils readme.gentoo-r1 systemd toolchain-funcs
+
+DESCRIPTION="IEEE 802.1X/WPA supplicant for secure wireless transfers"
+HOMEPAGE="https://w1.fi/wpa_supplicant/"
+LICENSE="|| ( GPL-2 BSD )"
+
+if [ "${PV}" = "9999" ]; then
+	inherit git-r3
+	EGIT_REPO_URI="https://w1.fi/hostap.git"
+else
+	KEYWORDS="~alpha amd64 arm arm64 ~ia64 ~loong ~mips ppc ppc64 ~riscv ~sparc x86"
+	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
+fi
+
+SLOT="0"
+IUSE="ap broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls tkip uncommon-eap-types wep wimax wps"
+
+# CONFIG_PRIVSEP=y does not have sufficient support for the new driver
+# interface functions used for MACsec, so this combination cannot be used
+# at least for now. bug #684442
+REQUIRED_USE="
+	macsec? ( !privsep )
+	privsep? ( !macsec )
+	broadcom-sta? ( !fils !mesh !mbo )
+"
+
+DEPEND="
+	>=dev-libs/openssl-1.0.2k:=
+	dbus? ( sys-apps/dbus )
+	kernel_linux? (
+		>=dev-libs/libnl-3.2:3
+		eap-sim? ( sys-apps/pcsc-lite )
+	)
+	!kernel_linux? ( net-libs/libpcap )
+	qt5? (
+		dev-qt/qtcore:5
+		dev-qt/qtgui:5
+		dev-qt/qtsvg:5
+		dev-qt/qtwidgets:5
+	)
+	readline? (
+		sys-libs/ncurses:0=
+		sys-libs/readline:0=
+	)
+"
+RDEPEND="${DEPEND}
+	selinux? ( sec-policy/selinux-networkmanager )
+	kernel_linux? (
+		net-wireless/wireless-regdb
+	)
+"
+BDEPEND="virtual/pkgconfig"
+
+DOC_CONTENTS="
+	If this is a clean installation of wpa_supplicant, you
+	have to create a configuration file named
+	${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf
+	An example configuration file is available for reference in
+	${EROOT}/usr/share/doc/${PF}/
+"
+
+S="${WORKDIR}/${P}/${PN}"
+
+Kconfig_style_config() {
+		#param 1 is CONFIG_* item
+		#param 2 is what to set it = to, defaulting in y
+		CONFIG_PARAM="${CONFIG_HEADER:-CONFIG_}$1"
+		setting="${2:-y}"
+
+		if [ ! $setting = n ]; then
+			#first remove any leading "# " if $2 is not n
+			sed -i "/^# *$CONFIG_PARAM=/s/^# *//" .config || echo "Kconfig_style_config error uncommenting $CONFIG_PARAM"
+			#set item = $setting (defaulting to y)
+			if ! sed -i "/^$CONFIG_PARAM\>/s/=.*/=$setting/" .config; then
+				echo "Kconfig_style_config error setting $CONFIG_PARAM=$setting"
+			fi
+			if [ -z "$( grep ^$CONFIG_PARAM= .config )" ] ; then
+				echo "$CONFIG_PARAM=$setting" >>.config
+			fi
+		else
+			#ensure item commented out
+			if ! sed -i "/^$CONFIG_PARAM\>/s/$CONFIG_PARAM/# $CONFIG_PARAM/" .config; then
+				echo "Kconfig_style_config error commenting $CONFIG_PARAM"
+			fi
+		fi
+}
+
+src_prepare() {
+	default
+
+	# net/bpf.h needed for net-libs/libpcap on Gentoo/FreeBSD
+	sed -i \
+		-e "s:\(#include <pcap\.h>\):#include <net/bpf.h>\n\1:" \
+		../src/l2_packet/l2_packet_freebsd.c || die
+
+	# Change configuration to match Gentoo locations (bug #143750)
+	sed -i \
+		-e "s:/usr/lib/opensc:/usr/$(get_libdir):" \
+		-e "s:/usr/lib/pkcs11:/usr/$(get_libdir):" \
+		wpa_supplicant.conf || die
+
+	# systemd entries to D-Bus service files (bug #372877)
+	echo 'SystemdService=wpa_supplicant.service' \
+		| tee -a dbus/*.service >/dev/null || die
+
+	cd "${WORKDIR}/${P}" || die
+
+	if use wimax; then
+		# generate-libeap-peer.patch comes before
+		# fix-undefined-reference-to-random_get_bytes.patch
+		eapply "${FILESDIR}/${P}-generate-libeap-peer.patch"
+
+		# multilib-strict fix (bug #373685)
+		sed -e "s/\/usr\/lib/\/usr\/$(get_libdir)/" -i src/eap_peer/Makefile || die
+	fi
+
+	# bug (320097)
+	eapply "${FILESDIR}/${PN}-2.6-do-not-call-dbus-functions-with-NULL-path.patch"
+
+	# bug (912315)
+	eapply "${FILESDIR}/${PN}-2.10-allow-legacy-renegotiation.patch"
+	eapply "${FILESDIR}/${P}-Drop-security-level-to-0-with-OpenSSL-3.0-wh.patch"
+
+	# bug (640492)
+	sed -i 's#-Werror ##' wpa_supplicant/Makefile || die
+
+	# LibreSSL patch (https://github.com/gentoo/libressl/issues/336)
+	eapply "${FILESDIR}/${PN}-2.9-libressl.patch"
+}
+
+src_configure() {
+	# Toolchain setup
+	tc-export CC PKG_CONFIG
+
+	cp defconfig .config || die
+
+	# Basic setup
+	Kconfig_style_config CTRL_IFACE
+	Kconfig_style_config MATCH_IFACE
+	Kconfig_style_config BACKEND file
+	Kconfig_style_config IBSS_RSN
+	Kconfig_style_config IEEE80211W
+	Kconfig_style_config IEEE80211R
+	Kconfig_style_config HT_OVERRIDES
+	Kconfig_style_config VHT_OVERRIDES
+	Kconfig_style_config OCV
+	Kconfig_style_config TLSV11
+	Kconfig_style_config TLSV12
+	Kconfig_style_config GETRANDOM
+
+	# Basic authentication methods
+	# NOTE: we don't set GPSK or SAKE as they conflict
+	# with the below options
+	Kconfig_style_config EAP_GTC
+	Kconfig_style_config EAP_MD5
+	Kconfig_style_config EAP_OTP
+	Kconfig_style_config EAP_PAX
+	Kconfig_style_config EAP_PSK
+	Kconfig_style_config EAP_TLV
+	Kconfig_style_config EAP_EXE
+	Kconfig_style_config IEEE8021X_EAPOL
+	Kconfig_style_config PKCS12
+	Kconfig_style_config PEERKEY
+	Kconfig_style_config EAP_LEAP
+	Kconfig_style_config EAP_MSCHAPV2
+	Kconfig_style_config EAP_PEAP
+	Kconfig_style_config EAP_TEAP
+	Kconfig_style_config EAP_TLS
+	Kconfig_style_config EAP_TTLS
+
+	# Enabling background scanning.
+	Kconfig_style_config BGSCAN_SIMPLE
+	Kconfig_style_config BGSCAN_LEARN
+
+	if use dbus ; then
+		Kconfig_style_config CTRL_IFACE_DBUS
+		Kconfig_style_config CTRL_IFACE_DBUS_NEW
+		Kconfig_style_config CTRL_IFACE_DBUS_INTRO
+	else
+		Kconfig_style_config CTRL_IFACE_DBUS n
+		Kconfig_style_config CTRL_IFACE_DBUS_NEW n
+		Kconfig_style_config CTRL_IFACE_DBUS_INTRO n
+	fi
+
+	if use eapol-test ; then
+		Kconfig_style_config EAPOL_TEST
+	fi
+
+	# Enable support for writing debug info to a log file and syslog.
+	Kconfig_style_config DEBUG_FILE
+	Kconfig_style_config DEBUG_SYSLOG
+
+	if use hs2-0 ; then
+		Kconfig_style_config INTERWORKING
+		Kconfig_style_config HS20
+	fi
+
+	if use mbo ; then
+		Kconfig_style_config MBO
+	else
+		Kconfig_style_config MBO n
+	fi
+
+	if use uncommon-eap-types; then
+		Kconfig_style_config EAP_GPSK
+		Kconfig_style_config EAP_SAKE
+		Kconfig_style_config EAP_GPSK_SHA256
+		Kconfig_style_config EAP_IKEV2
+		Kconfig_style_config EAP_EKE
+	fi
+
+	if use eap-sim ; then
+		# Smart card authentication
+		Kconfig_style_config EAP_SIM
+		Kconfig_style_config EAP_AKA
+		Kconfig_style_config EAP_AKA_PRIME
+		Kconfig_style_config PCSC
+	fi
+
+	if use fasteap ; then
+		Kconfig_style_config EAP_FAST
+	fi
+
+	if use readline ; then
+		# readline/history support for wpa_cli
+		Kconfig_style_config READLINE
+	else
+		#internal line edit mode for wpa_cli
+		Kconfig_style_config WPA_CLI_EDIT
+	fi
+
+	Kconfig_style_config TLS openssl
+	Kconfig_style_config FST
+
+	Kconfig_style_config EAP_PWD
+	if use fils; then
+		Kconfig_style_config FILS
+		Kconfig_style_config FILS_SK_PFS
+	fi
+	if use mesh; then
+		Kconfig_style_config MESH
+	else
+		Kconfig_style_config MESH n
+	fi
+	# WPA3
+	Kconfig_style_config OWE
+	Kconfig_style_config SAE
+	Kconfig_style_config DPP
+	Kconfig_style_config DPP2
+	Kconfig_style_config SUITEB192
+	Kconfig_style_config SUITEB
+
+	if use wep ; then
+		Kconfig_style_config WEP
+	else
+		Kconfig_style_config WEP n
+	fi
+
+	# Watch out, reversed logic
+	if use tkip ; then
+		Kconfig_style_config NO_TKIP n
+	else
+		Kconfig_style_config NO_TKIP
+	fi
+
+	if use smartcard ; then
+		Kconfig_style_config SMARTCARD
+	else
+		Kconfig_style_config SMARTCARD n
+	fi
+
+	if use tdls ; then
+		Kconfig_style_config TDLS
+	fi
+
+	if use kernel_linux ; then
+		# Linux specific drivers
+		Kconfig_style_config DRIVER_ATMEL
+		Kconfig_style_config DRIVER_HOSTAP
+		Kconfig_style_config DRIVER_IPW
+		Kconfig_style_config DRIVER_NL80211
+		Kconfig_style_config DRIVER_RALINK
+		Kconfig_style_config DRIVER_WEXT
+		Kconfig_style_config DRIVER_WIRED
+
+		if use macsec ; then
+			#requires something, no idea what
+			#Kconfig_style_config DRIVER_MACSEC_QCA
+			Kconfig_style_config DRIVER_MACSEC_LINUX
+			Kconfig_style_config MACSEC
+		else
+			# bug #831369 and bug #684442
+			Kconfig_style_config DRIVER_MACSEC_LINUX n
+			Kconfig_style_config MACSEC n
+		fi
+
+		if use ps3 ; then
+			Kconfig_style_config DRIVER_PS3
+		fi
+	fi
+
+	# Wi-Fi Protected Setup (WPS)
+	if use wps ; then
+		Kconfig_style_config WPS
+		Kconfig_style_config WPS2
+		# USB Flash Drive
+		Kconfig_style_config WPS_UFD
+		# External Registrar
+		Kconfig_style_config WPS_ER
+		# Universal Plug'n'Play
+		Kconfig_style_config WPS_UPNP
+		# Near Field Communication
+		Kconfig_style_config WPS_NFC
+	else
+		Kconfig_style_config WPS n
+		Kconfig_style_config WPS2 n
+		Kconfig_style_config WPS_UFD n
+		Kconfig_style_config WPS_ER n
+		Kconfig_style_config WPS_UPNP n
+		Kconfig_style_config WPS_NFC n
+	fi
+
+	# Wi-Fi Direct (WiDi)
+	if use p2p ; then
+		Kconfig_style_config P2P
+		Kconfig_style_config WIFI_DISPLAY
+	else
+		Kconfig_style_config P2P n
+		Kconfig_style_config WIFI_DISPLAY n
+	fi
+
+	# Access Point Mode
+	if use ap ; then
+		Kconfig_style_config AP
+	else
+		Kconfig_style_config AP n
+	fi
+
+	# Enable essentials for AP/P2P
+	if use ap || use p2p ; then
+		# Enabling HT support (802.11n)
+		Kconfig_style_config IEEE80211N
+
+		# Enabling VHT support (802.11ac)
+		Kconfig_style_config IEEE80211AC
+	fi
+
+	# Enable mitigation against certain attacks against TKIP
+	Kconfig_style_config DELAYED_MIC_ERROR_REPORT
+
+	if use privsep ; then
+		Kconfig_style_config PRIVSEP
+	fi
+
+	if use kernel_linux ; then
+		Kconfig_style_config LIBNL32
+	fi
+
+	if use qt5 ; then
+		pushd "${S}"/wpa_gui-qt4 > /dev/null || die
+		eqmake5 wpa_gui.pro
+		popd > /dev/null || die
+	fi
+}
+
+src_compile() {
+	einfo "Building wpa_supplicant"
+	emake V=1 BINDIR=/usr/sbin
+
+	if use wimax; then
+		emake -C ../src/eap_peer clean
+		emake -C ../src/eap_peer
+	fi
+
+	if use qt5; then
+		einfo "Building wpa_gui"
+		emake -C "${S}"/wpa_gui-qt4
+	fi
+
+	if use eapol-test ; then
+		emake eapol_test
+	fi
+}
+
+src_install() {
+	dosbin wpa_supplicant
+	use privsep && dosbin wpa_priv
+	dobin wpa_cli wpa_passphrase
+
+	newinitd "${FILESDIR}/${PN}-init.d" wpa_supplicant
+	newconfd "${FILESDIR}/${PN}-conf.d" wpa_supplicant
+
+	exeinto /etc/wpa_supplicant/
+	newexe "${FILESDIR}/wpa_cli.sh" wpa_cli.sh
+
+	readme.gentoo_create_doc
+	dodoc ChangeLog {eap_testing,todo}.txt README{,-WPS} \
+		wpa_supplicant.conf
+
+	newdoc .config build-config
+
+	if [ "${PV}" != "9999" ]; then
+		doman doc/docbook/*.{5,8}
+	fi
+
+	if use qt5 ; then
+		into /usr
+		dobin wpa_gui-qt4/wpa_gui
+		doicon wpa_gui-qt4/icons/wpa_gui.svg
+		domenu wpa_gui-qt4/wpa_gui.desktop
+	else
+		rm "${ED}"/usr/share/man/man8/wpa_gui.8
+	fi
+
+	use wimax && emake DESTDIR="${D}" -C ../src/eap_peer install
+
+	if use dbus ; then
+		pushd "${S}"/dbus > /dev/null || die
+		insinto /etc/dbus-1/system.d
+		newins dbus-wpa_supplicant.conf wpa_supplicant.conf
+		insinto /usr/share/dbus-1/system-services
+		doins fi.w1.wpa_supplicant1.service
+		popd > /dev/null || die
+
+		# This unit relies on dbus support, bug 538600.
+		systemd_dounit systemd/wpa_supplicant.service
+	fi
+
+	if use eapol-test ; then
+		dobin eapol_test
+	fi
+
+	systemd_dounit "systemd/wpa_supplicant@.service"
+	systemd_dounit "systemd/wpa_supplicant-nl80211@.service"
+	systemd_dounit "systemd/wpa_supplicant-wired@.service"
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+
+	if [[ -e "${EROOT}"/etc/wpa_supplicant.conf ]] ; then
+		echo
+		ewarn "WARNING: your old configuration file ${EROOT}/etc/wpa_supplicant.conf"
+		ewarn "needs to be moved to ${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf"
+	fi
+	if ! use wep; then
+		einfo "WARNING: You are building with WEP support disabled, which is recommended since"
+		einfo "this protocol is deprecated and insecure.  If you still need to connect to"
+		einfo "WEP-enabled networks, you may turn this flag back on.  With this flag off,"
+		einfo "WEP-enabled networks will not even show up as available."
+		einfo "If your network is missing you may wish to USE=wep"
+	fi
+	if ! use tkip; then
+		ewarn "WARNING: You are building with TKIP support disabled, which is recommended since"
+		ewarn "this protocol is deprecated and insecure.  If you still need to connect to"
+		ewarn "TKIP-enabled networks, you may turn this flag back on.  With this flag off,"
+		ewarn "TKIP-enabled networks, including mixed mode TKIP/AES-CCMP will not even show up"
+		ewarn "as available.  If your network is missing you may wish to USE=tkip"
+	fi
+
+	# Mea culpa, feel free to remove that after some time --mgorny.
+	local fn
+	for fn in wpa_supplicant{,@wlan0}.service; do
+		if [[ -e "${EROOT}"/etc/systemd/system/network.target.wants/${fn} ]]
+		then
+			ebegin "Moving ${fn} to multi-user.target"
+			mv "${EROOT}"/etc/systemd/system/network.target.wants/${fn} \
+				"${EROOT}"/etc/systemd/system/multi-user.target.wants/ || die
+			eend ${?} \
+				"Please try to re-enable ${fn}"
+		fi
+	done
+
+	systemd_reenable wpa_supplicant.service
+}


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2024-02-25  2:42 orbea
  0 siblings, 0 replies; 19+ messages in thread
From: orbea @ 2024-02-25  2:42 UTC (permalink / raw
  To: gentoo-commits

commit:     52685edd1faaed5b39562ce1f8159ac388ae582b
Author:     orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Sun Feb 25 02:14:56 2024 +0000
Commit:     orbea <orbea <AT> riseup <DOT> net>
CommitDate: Sun Feb 25 02:14:56 2024 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=52685edd

net-wireless/wpa_supplicant: sync ::gentoo

Signed-off-by: orbea <orbea <AT> riseup.net>

 net-wireless/wpa_supplicant/metadata.xml           |  1 -
 .../wpa_supplicant/wpa_supplicant-2.10-r1.ebuild   | 26 ++++++++--------------
 2 files changed, 9 insertions(+), 18 deletions(-)

diff --git a/net-wireless/wpa_supplicant/metadata.xml b/net-wireless/wpa_supplicant/metadata.xml
index ecb638b..489b2ea 100644
--- a/net-wireless/wpa_supplicant/metadata.xml
+++ b/net-wireless/wpa_supplicant/metadata.xml
@@ -8,7 +8,6 @@
 	<use>
 		<flag name="ap">Add support for access point mode</flag>
 		<flag name="broadcom-sta">Flag to help users disable features not supported by broadcom-sta driver</flag>
-		<flag name="crda">Use <pkg>net-wireless/crda</pkg> for regulatory domain loading instead of in-kernel (4.15+) support</flag>
 		<flag name="eap-sim">Add support for EAP-SIM authentication algorithm</flag>
 		<flag name="eapol-test">Build and install eapol_test binary</flag>
 		<flag name="fasteap">Add support for FAST-EAP authentication algorithm</flag>

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r1.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r1.ebuild
index 4a319f1..d99e4d4 100644
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r1.ebuild
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r1.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2022 Gentoo Authors
+# Copyright 1999-2024 Gentoo Authors
 # Distributed under the terms of the GNU General Public License v2
 
 EAPI=8
@@ -18,7 +18,7 @@ else
 fi
 
 SLOT="0"
-IUSE="ap +crda broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls tkip uncommon-eap-types wep wimax wps"
+IUSE="ap broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls tkip uncommon-eap-types wep wimax wps"
 
 # CONFIG_PRIVSEP=y does not have sufficient support for the new driver
 # interface functions used for MACsec, so this combination cannot be used
@@ -52,7 +52,6 @@ RDEPEND="${DEPEND}
 	selinux? ( sec-policy/selinux-networkmanager )
 	kernel_linux? (
 		net-wireless/wireless-regdb
-		crda? ( net-wireless/crda )
 	)
 "
 BDEPEND="virtual/pkgconfig"
@@ -90,22 +89,15 @@ Kconfig_style_config() {
 pkg_pretend() {
 	CONFIG_CHECK=""
 
-	if use crda ; then
-		CONFIG_CHECK="${CONFIG_CHECK} ~CFG80211_CRDA_SUPPORT"
-		WARNING_CFG80211_CRDA_SUPPORT="REGULATORY DOMAIN PROBLEM: please enable CFG80211_CRDA_SUPPORT for proper regulatory domain support"
-	fi
-
 	check_extra_config
 
-	if ! use crda ; then
-		if linux_config_exists && linux_chkconfig_builtin CFG80211 &&
-			[[ $(linux_chkconfig_string EXTRA_FIRMWARE) != *regulatory.db* ]]
-		then
-			ewarn "REGULATORY DOMAIN PROBLEM:"
-			ewarn "With CONFIG_CFG80211=y (built-in), the driver won't be able to load regulatory.db from"
-			ewarn " /lib/firmware, resulting in broken regulatory domain support.  Please set CONFIG_CFG80211=m"
-			ewarn " or add regulatory.db and regulatory.db.p7s to CONFIG_EXTRA_FIRMWARE."
-		fi
+	if linux_config_exists && linux_chkconfig_builtin CFG80211 &&
+		[[ $(linux_chkconfig_string EXTRA_FIRMWARE) != *regulatory.db* ]]
+	then
+		ewarn "REGULATORY DOMAIN PROBLEM:"
+		ewarn "With CONFIG_CFG80211=y (built-in), the driver won't be able to load regulatory.db from"
+		ewarn " /lib/firmware, resulting in broken regulatory domain support.  Please set CONFIG_CFG80211=m"
+		ewarn " or add regulatory.db and regulatory.db.p7s to CONFIG_EXTRA_FIRMWARE."
 	fi
 }
 


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2024-01-14 21:44 orbea
  0 siblings, 0 replies; 19+ messages in thread
From: orbea @ 2024-01-14 21:44 UTC (permalink / raw
  To: gentoo-commits

commit:     78ff0a7e4d2f8b2a91baf9c064fd1296a9789689
Author:     orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Sun Jan 14 21:24:42 2024 +0000
Commit:     orbea <orbea <AT> riseup <DOT> net>
CommitDate: Sun Jan 14 21:24:42 2024 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=78ff0a7e

net-wireless/wpa_supplicant: stabilize 2.10-r3 for ppc

Signed-off-by: orbea <orbea <AT> riseup.net>

 net-wireless/wpa_supplicant/wpa_supplicant-2.10-r3.ebuild | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r3.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r3.ebuild
index 63cbefc..297b9cb 100644
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r3.ebuild
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r3.ebuild
@@ -13,7 +13,7 @@ if [ "${PV}" = "9999" ]; then
 	inherit git-r3
 	EGIT_REPO_URI="https://w1.fi/hostap.git"
 else
-	KEYWORDS="~alpha amd64 arm arm64 ~ia64 ~loong ~mips ~ppc ppc64 ~riscv ~sparc x86"
+	KEYWORDS="~alpha amd64 arm arm64 ~ia64 ~loong ~mips ppc ppc64 ~riscv ~sparc x86"
 	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
 fi
 
@@ -131,7 +131,6 @@ src_prepare() {
 
 	# LibreSSL patch (https://github.com/gentoo/libressl/issues/336)
 	eapply "${FILESDIR}/${PN}-2.9-libressl.patch"
-
 }
 
 src_configure() {


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2023-09-25 19:04 orbea
  0 siblings, 0 replies; 19+ messages in thread
From: orbea @ 2023-09-25 19:04 UTC (permalink / raw
  To: gentoo-commits

commit:     5548d7fff69af4b8aa19d22f6c752e4f56ffe690
Author:     Saki Xi <space_raccoon <AT> riseup <DOT> net>
AuthorDate: Mon Sep 25 17:34:36 2023 +0000
Commit:     orbea <orbea <AT> riseup <DOT> net>
CommitDate: Mon Sep 25 19:03:44 2023 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=5548d7ff

net-wireless/wpa_supplicant: sync again ::gentoo

Signed-off-by: Saki Xi <space_raccoon <AT> riseup.net>
Closes: https://github.com/gentoo/libressl/pull/539
Signed-off-by: orbea <orbea <AT> riseup.net>

 net-wireless/wpa_supplicant/wpa_supplicant-2.10-r3.ebuild | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r3.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r3.ebuild
index 3045496..63cbefc 100644
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r3.ebuild
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r3.ebuild
@@ -13,7 +13,7 @@ if [ "${PV}" = "9999" ]; then
 	inherit git-r3
 	EGIT_REPO_URI="https://w1.fi/hostap.git"
 else
-	KEYWORDS="~alpha amd64 arm ~arm64 ~ia64 ~loong ~mips ~ppc ppc64 ~riscv ~sparc x86"
+	KEYWORDS="~alpha amd64 arm arm64 ~ia64 ~loong ~mips ~ppc ppc64 ~riscv ~sparc x86"
 	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
 fi
 


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2023-09-19 21:54 orbea
  0 siblings, 0 replies; 19+ messages in thread
From: orbea @ 2023-09-19 21:54 UTC (permalink / raw
  To: gentoo-commits

commit:     c3471d33146c2b25f658a23b965fab497aed9e61
Author:     Saki Xi <space_raccoon <AT> riseup <DOT> net>
AuthorDate: Tue Sep 19 21:39:10 2023 +0000
Commit:     orbea <orbea <AT> riseup <DOT> net>
CommitDate: Tue Sep 19 21:53:40 2023 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=c3471d33

net-wireless/wpa_supplicant: sync ::gentoo

Signed-off-by: Saki Xi <space_raccoon <AT> riseup.net>
Closes: https://github.com/gentoo/libressl/pull/538
Signed-off-by: orbea <orbea <AT> riseup.net>

 net-wireless/wpa_supplicant/wpa_supplicant-2.10-r3.ebuild | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r3.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r3.ebuild
index 071f493..3045496 100644
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r3.ebuild
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r3.ebuild
@@ -13,7 +13,7 @@ if [ "${PV}" = "9999" ]; then
 	inherit git-r3
 	EGIT_REPO_URI="https://w1.fi/hostap.git"
 else
-	KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~ia64 ~loong ~mips ~ppc ~ppc64 ~riscv ~sparc ~x86"
+	KEYWORDS="~alpha amd64 arm ~arm64 ~ia64 ~loong ~mips ~ppc ppc64 ~riscv ~sparc x86"
 	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
 fi
 


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2023-08-24 15:53 orbea
  0 siblings, 0 replies; 19+ messages in thread
From: orbea @ 2023-08-24 15:53 UTC (permalink / raw
  To: gentoo-commits

commit:     c59be8009a345847be2af978eafb96ebc7d70bf0
Author:     orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Thu Aug 24 15:45:32 2023 +0000
Commit:     orbea <orbea <AT> riseup <DOT> net>
CommitDate: Thu Aug 24 15:45:32 2023 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=c59be800

net-wireless/wpa_supplicant: add 2.10-r2

Signed-off-by: orbea <orbea <AT> riseup.net>

 .../wpa_supplicant/wpa_supplicant-2.10-r2.ebuild   | 486 +++++++++++++++++++++
 1 file changed, 486 insertions(+)

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r2.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r2.ebuild
new file mode 100644
index 0000000..29a723e
--- /dev/null
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r2.ebuild
@@ -0,0 +1,486 @@
+# Copyright 1999-2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit desktop linux-info qmake-utils readme.gentoo-r1 systemd toolchain-funcs
+
+DESCRIPTION="IEEE 802.1X/WPA supplicant for secure wireless transfers"
+HOMEPAGE="https://w1.fi/wpa_supplicant/"
+LICENSE="|| ( GPL-2 BSD )"
+
+if [ "${PV}" = "9999" ]; then
+	inherit git-r3
+	EGIT_REPO_URI="https://w1.fi/hostap.git"
+else
+	KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~ia64 ~loong ~mips ~ppc ~ppc64 ~riscv ~sparc ~x86"
+	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
+fi
+
+SLOT="0"
+IUSE="ap broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls tkip uncommon-eap-types wep wimax wps"
+
+# CONFIG_PRIVSEP=y does not have sufficient support for the new driver
+# interface functions used for MACsec, so this combination cannot be used
+# at least for now. bug #684442
+REQUIRED_USE="
+	macsec? ( !privsep )
+	privsep? ( !macsec )
+	broadcom-sta? ( !fils !mesh !mbo )
+"
+
+DEPEND="
+	>=dev-libs/openssl-1.0.2k:=
+	dbus? ( sys-apps/dbus )
+	kernel_linux? (
+		>=dev-libs/libnl-3.2:3
+		eap-sim? ( sys-apps/pcsc-lite )
+	)
+	!kernel_linux? ( net-libs/libpcap )
+	qt5? (
+		dev-qt/qtcore:5
+		dev-qt/qtgui:5
+		dev-qt/qtsvg:5
+		dev-qt/qtwidgets:5
+	)
+	readline? (
+		sys-libs/ncurses:0=
+		sys-libs/readline:0=
+	)
+"
+RDEPEND="${DEPEND}
+	selinux? ( sec-policy/selinux-networkmanager )
+	kernel_linux? (
+		net-wireless/wireless-regdb
+	)
+"
+BDEPEND="virtual/pkgconfig"
+
+DOC_CONTENTS="
+	If this is a clean installation of wpa_supplicant, you
+	have to create a configuration file named
+	${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf
+	An example configuration file is available for reference in
+	${EROOT}/usr/share/doc/${PF}/
+"
+
+S="${WORKDIR}/${P}/${PN}"
+
+Kconfig_style_config() {
+		#param 1 is CONFIG_* item
+		#param 2 is what to set it = to, defaulting in y
+		CONFIG_PARAM="${CONFIG_HEADER:-CONFIG_}$1"
+		setting="${2:-y}"
+
+		if [ ! $setting = n ]; then
+			#first remove any leading "# " if $2 is not n
+			sed -i "/^# *$CONFIG_PARAM=/s/^# *//" .config || echo "Kconfig_style_config error uncommenting $CONFIG_PARAM"
+			#set item = $setting (defaulting to y)
+			if ! sed -i "/^$CONFIG_PARAM\>/s/=.*/=$setting/" .config; then
+				echo "Kconfig_style_config error setting $CONFIG_PARAM=$setting"
+			fi
+			if [ -z "$( grep ^$CONFIG_PARAM= .config )" ] ; then
+				echo "$CONFIG_PARAM=$setting" >>.config
+			fi
+		else
+			#ensure item commented out
+			if ! sed -i "/^$CONFIG_PARAM\>/s/$CONFIG_PARAM/# $CONFIG_PARAM/" .config; then
+				echo "Kconfig_style_config error commenting $CONFIG_PARAM"
+			fi
+		fi
+}
+
+src_prepare() {
+	default
+
+	# net/bpf.h needed for net-libs/libpcap on Gentoo/FreeBSD
+	sed -i \
+		-e "s:\(#include <pcap\.h>\):#include <net/bpf.h>\n\1:" \
+		../src/l2_packet/l2_packet_freebsd.c || die
+
+	# Change configuration to match Gentoo locations (bug #143750)
+	sed -i \
+		-e "s:/usr/lib/opensc:/usr/$(get_libdir):" \
+		-e "s:/usr/lib/pkcs11:/usr/$(get_libdir):" \
+		wpa_supplicant.conf || die
+
+	# systemd entries to D-Bus service files (bug #372877)
+	echo 'SystemdService=wpa_supplicant.service' \
+		| tee -a dbus/*.service >/dev/null || die
+
+	cd "${WORKDIR}/${P}" || die
+
+	if use wimax; then
+		# generate-libeap-peer.patch comes before
+		# fix-undefined-reference-to-random_get_bytes.patch
+		eapply "${FILESDIR}/${P}-generate-libeap-peer.patch"
+
+		# multilib-strict fix (bug #373685)
+		sed -e "s/\/usr\/lib/\/usr\/$(get_libdir)/" -i src/eap_peer/Makefile || die
+	fi
+
+	# bug (320097)
+	eapply "${FILESDIR}/${PN}-2.6-do-not-call-dbus-functions-with-NULL-path.patch"
+
+	# bug (640492)
+	sed -i 's#-Werror ##' wpa_supplicant/Makefile || die
+
+	# LibreSSL patch (https://github.com/gentoo/libressl/issues/336)
+	eapply "${FILESDIR}/${PN}-2.9-libressl.patch"
+}
+
+src_configure() {
+	# Toolchain setup
+	tc-export CC PKG_CONFIG
+
+	cp defconfig .config || die
+
+	# Basic setup
+	Kconfig_style_config CTRL_IFACE
+	Kconfig_style_config MATCH_IFACE
+	Kconfig_style_config BACKEND file
+	Kconfig_style_config IBSS_RSN
+	Kconfig_style_config IEEE80211W
+	Kconfig_style_config IEEE80211R
+	Kconfig_style_config HT_OVERRIDES
+	Kconfig_style_config VHT_OVERRIDES
+	Kconfig_style_config OCV
+	Kconfig_style_config TLSV11
+	Kconfig_style_config TLSV12
+	Kconfig_style_config GETRANDOM
+
+	# Basic authentication methods
+	# NOTE: we don't set GPSK or SAKE as they conflict
+	# with the below options
+	Kconfig_style_config EAP_GTC
+	Kconfig_style_config EAP_MD5
+	Kconfig_style_config EAP_OTP
+	Kconfig_style_config EAP_PAX
+	Kconfig_style_config EAP_PSK
+	Kconfig_style_config EAP_TLV
+	Kconfig_style_config EAP_EXE
+	Kconfig_style_config IEEE8021X_EAPOL
+	Kconfig_style_config PKCS12
+	Kconfig_style_config PEERKEY
+	Kconfig_style_config EAP_LEAP
+	Kconfig_style_config EAP_MSCHAPV2
+	Kconfig_style_config EAP_PEAP
+	Kconfig_style_config EAP_TEAP
+	Kconfig_style_config EAP_TLS
+	Kconfig_style_config EAP_TTLS
+
+	# Enabling background scanning.
+	Kconfig_style_config BGSCAN_SIMPLE
+	Kconfig_style_config BGSCAN_LEARN
+
+	if use dbus ; then
+		Kconfig_style_config CTRL_IFACE_DBUS
+		Kconfig_style_config CTRL_IFACE_DBUS_NEW
+		Kconfig_style_config CTRL_IFACE_DBUS_INTRO
+	else
+		Kconfig_style_config CTRL_IFACE_DBUS n
+		Kconfig_style_config CTRL_IFACE_DBUS_NEW n
+		Kconfig_style_config CTRL_IFACE_DBUS_INTRO n
+	fi
+
+	if use eapol-test ; then
+		Kconfig_style_config EAPOL_TEST
+	fi
+
+	# Enable support for writing debug info to a log file and syslog.
+	Kconfig_style_config DEBUG_FILE
+	Kconfig_style_config DEBUG_SYSLOG
+
+	if use hs2-0 ; then
+		Kconfig_style_config INTERWORKING
+		Kconfig_style_config HS20
+	fi
+
+	if use mbo ; then
+		Kconfig_style_config MBO
+	else
+		Kconfig_style_config MBO n
+	fi
+
+	if use uncommon-eap-types; then
+		Kconfig_style_config EAP_GPSK
+		Kconfig_style_config EAP_SAKE
+		Kconfig_style_config EAP_GPSK_SHA256
+		Kconfig_style_config EAP_IKEV2
+		Kconfig_style_config EAP_EKE
+	fi
+
+	if use eap-sim ; then
+		# Smart card authentication
+		Kconfig_style_config EAP_SIM
+		Kconfig_style_config EAP_AKA
+		Kconfig_style_config EAP_AKA_PRIME
+		Kconfig_style_config PCSC
+	fi
+
+	if use fasteap ; then
+		Kconfig_style_config EAP_FAST
+	fi
+
+	if use readline ; then
+		# readline/history support for wpa_cli
+		Kconfig_style_config READLINE
+	else
+		#internal line edit mode for wpa_cli
+		Kconfig_style_config WPA_CLI_EDIT
+	fi
+
+	Kconfig_style_config TLS openssl
+	Kconfig_style_config FST
+
+	Kconfig_style_config EAP_PWD
+	if use fils; then
+		Kconfig_style_config FILS
+		Kconfig_style_config FILS_SK_PFS
+	fi
+	if use mesh; then
+		Kconfig_style_config MESH
+	else
+		Kconfig_style_config MESH n
+	fi
+	# WPA3
+	Kconfig_style_config OWE
+	Kconfig_style_config SAE
+	Kconfig_style_config DPP
+	Kconfig_style_config DPP2
+	Kconfig_style_config SUITEB192
+	Kconfig_style_config SUITEB
+
+	if use wep ; then
+		Kconfig_style_config WEP
+	else
+		Kconfig_style_config WEP n
+	fi
+
+	# Watch out, reversed logic
+	if use tkip ; then
+		Kconfig_style_config NO_TKIP n
+	else
+		Kconfig_style_config NO_TKIP
+	fi
+
+	if use smartcard ; then
+		Kconfig_style_config SMARTCARD
+	else
+		Kconfig_style_config SMARTCARD n
+	fi
+
+	if use tdls ; then
+		Kconfig_style_config TDLS
+	fi
+
+	if use kernel_linux ; then
+		# Linux specific drivers
+		Kconfig_style_config DRIVER_ATMEL
+		Kconfig_style_config DRIVER_HOSTAP
+		Kconfig_style_config DRIVER_IPW
+		Kconfig_style_config DRIVER_NL80211
+		Kconfig_style_config DRIVER_RALINK
+		Kconfig_style_config DRIVER_WEXT
+		Kconfig_style_config DRIVER_WIRED
+
+		if use macsec ; then
+			#requires something, no idea what
+			#Kconfig_style_config DRIVER_MACSEC_QCA
+			Kconfig_style_config DRIVER_MACSEC_LINUX
+			Kconfig_style_config MACSEC
+		else
+			# bug #831369 and bug #684442
+			Kconfig_style_config DRIVER_MACSEC_LINUX n
+			Kconfig_style_config MACSEC n
+		fi
+
+		if use ps3 ; then
+			Kconfig_style_config DRIVER_PS3
+		fi
+	fi
+
+	# Wi-Fi Protected Setup (WPS)
+	if use wps ; then
+		Kconfig_style_config WPS
+		Kconfig_style_config WPS2
+		# USB Flash Drive
+		Kconfig_style_config WPS_UFD
+		# External Registrar
+		Kconfig_style_config WPS_ER
+		# Universal Plug'n'Play
+		Kconfig_style_config WPS_UPNP
+		# Near Field Communication
+		Kconfig_style_config WPS_NFC
+	else
+		Kconfig_style_config WPS n
+		Kconfig_style_config WPS2 n
+		Kconfig_style_config WPS_UFD n
+		Kconfig_style_config WPS_ER n
+		Kconfig_style_config WPS_UPNP n
+		Kconfig_style_config WPS_NFC n
+	fi
+
+	# Wi-Fi Direct (WiDi)
+	if use p2p ; then
+		Kconfig_style_config P2P
+		Kconfig_style_config WIFI_DISPLAY
+	else
+		Kconfig_style_config P2P n
+		Kconfig_style_config WIFI_DISPLAY n
+	fi
+
+	# Access Point Mode
+	if use ap ; then
+		Kconfig_style_config AP
+	else
+		Kconfig_style_config AP n
+	fi
+
+	# Enable essentials for AP/P2P
+	if use ap || use p2p ; then
+		# Enabling HT support (802.11n)
+		Kconfig_style_config IEEE80211N
+
+		# Enabling VHT support (802.11ac)
+		Kconfig_style_config IEEE80211AC
+	fi
+
+	# Enable mitigation against certain attacks against TKIP
+	Kconfig_style_config DELAYED_MIC_ERROR_REPORT
+
+	if use privsep ; then
+		Kconfig_style_config PRIVSEP
+	fi
+
+	if use kernel_linux ; then
+		Kconfig_style_config LIBNL32
+	fi
+
+	if use qt5 ; then
+		pushd "${S}"/wpa_gui-qt4 > /dev/null || die
+		eqmake5 wpa_gui.pro
+		popd > /dev/null || die
+	fi
+}
+
+src_compile() {
+	einfo "Building wpa_supplicant"
+	emake V=1 BINDIR=/usr/sbin
+
+	if use wimax; then
+		emake -C ../src/eap_peer clean
+		emake -C ../src/eap_peer
+	fi
+
+	if use qt5; then
+		einfo "Building wpa_gui"
+		emake -C "${S}"/wpa_gui-qt4
+	fi
+
+	if use eapol-test ; then
+		emake eapol_test
+	fi
+}
+
+src_install() {
+	dosbin wpa_supplicant
+	use privsep && dosbin wpa_priv
+	dobin wpa_cli wpa_passphrase
+
+	# baselayout-1 compat
+	if has_version "<sys-apps/baselayout-2.0.0"; then
+		dodir /sbin
+		dosym ../usr/sbin/wpa_supplicant /sbin/wpa_supplicant
+		dodir /bin
+		dosym ../usr/bin/wpa_cli /bin/wpa_cli
+	fi
+
+	if has_version ">=sys-apps/openrc-0.5.0"; then
+		newinitd "${FILESDIR}/${PN}-init.d" wpa_supplicant
+		newconfd "${FILESDIR}/${PN}-conf.d" wpa_supplicant
+	fi
+
+	exeinto /etc/wpa_supplicant/
+	newexe "${FILESDIR}/wpa_cli.sh" wpa_cli.sh
+
+	readme.gentoo_create_doc
+	dodoc ChangeLog {eap_testing,todo}.txt README{,-WPS} \
+		wpa_supplicant.conf
+
+	newdoc .config build-config
+
+	if [ "${PV}" != "9999" ]; then
+		doman doc/docbook/*.{5,8}
+	fi
+
+	if use qt5 ; then
+		into /usr
+		dobin wpa_gui-qt4/wpa_gui
+		doicon wpa_gui-qt4/icons/wpa_gui.svg
+		domenu wpa_gui-qt4/wpa_gui.desktop
+	else
+		rm "${ED}"/usr/share/man/man8/wpa_gui.8
+	fi
+
+	use wimax && emake DESTDIR="${D}" -C ../src/eap_peer install
+
+	if use dbus ; then
+		pushd "${S}"/dbus > /dev/null || die
+		insinto /etc/dbus-1/system.d
+		newins dbus-wpa_supplicant.conf wpa_supplicant.conf
+		insinto /usr/share/dbus-1/system-services
+		doins fi.w1.wpa_supplicant1.service
+		popd > /dev/null || die
+
+		# This unit relies on dbus support, bug 538600.
+		systemd_dounit systemd/wpa_supplicant.service
+	fi
+
+	if use eapol-test ; then
+		dobin eapol_test
+	fi
+
+	systemd_dounit "systemd/wpa_supplicant@.service"
+	systemd_dounit "systemd/wpa_supplicant-nl80211@.service"
+	systemd_dounit "systemd/wpa_supplicant-wired@.service"
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+
+	if [[ -e "${EROOT}"/etc/wpa_supplicant.conf ]] ; then
+		echo
+		ewarn "WARNING: your old configuration file ${EROOT}/etc/wpa_supplicant.conf"
+		ewarn "needs to be moved to ${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf"
+	fi
+	if ! use wep; then
+		einfo "WARNING: You are building with WEP support disabled, which is recommended since"
+		einfo "this protocol is deprecated and insecure.  If you still need to connect to"
+		einfo "WEP-enabled networks, you may turn this flag back on.  With this flag off,"
+		einfo "WEP-enabled networks will not even show up as available."
+		einfo "If your network is missing you may wish to USE=wep"
+	fi
+	if ! use tkip; then
+		ewarn "WARNING: You are building with TKIP support disabled, which is recommended since"
+		ewarn "this protocol is deprecated and insecure.  If you still need to connect to"
+		ewarn "TKIP-enabled networks, you may turn this flag back on.  With this flag off,"
+		ewarn "TKIP-enabled networks, including mixed mode TKIP/AES-CCMP will not even show up"
+		ewarn "as available.  If your network is missing you may wish to USE=tkip"
+	fi
+
+	# Mea culpa, feel free to remove that after some time --mgorny.
+	local fn
+	for fn in wpa_supplicant{,@wlan0}.service; do
+		if [[ -e "${EROOT}"/etc/systemd/system/network.target.wants/${fn} ]]
+		then
+			ebegin "Moving ${fn} to multi-user.target"
+			mv "${EROOT}"/etc/systemd/system/network.target.wants/${fn} \
+				"${EROOT}"/etc/systemd/system/multi-user.target.wants/ || die
+			eend ${?} \
+				"Please try to re-enable ${fn}"
+		fi
+	done
+
+	systemd_reenable wpa_supplicant.service
+}


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2022-03-19 22:15 Quentin Retornaz
  0 siblings, 0 replies; 19+ messages in thread
From: Quentin Retornaz @ 2022-03-19 22:15 UTC (permalink / raw
  To: gentoo-commits

commit:     c620275fce1a7827bca10eae2899da0e9f544ea5
Author:     orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Thu Mar 17 13:32:32 2022 +0000
Commit:     Quentin Retornaz <gentoo <AT> retornaz <DOT> com>
CommitDate: Sat Mar 19 22:15:34 2022 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=c620275f

net-wireless/wpa_supplicant: Bump to version 2.10-r1

Signed-off-by: orbea <orbea <AT> riseup.net>
Closes: https://github.com/gentoo/libressl/pull/390
Signed-off-by: Quentin Retornaz <gentoo <AT> retornaz.com>

 ...cant-2.10.ebuild => wpa_supplicant-2.10-r1.ebuild} | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r1.ebuild
similarity index 97%
rename from net-wireless/wpa_supplicant/wpa_supplicant-2.10.ebuild
rename to net-wireless/wpa_supplicant/wpa_supplicant-2.10-r1.ebuild
index 2aa4e4e..f2829f0 100644
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.10.ebuild
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r1.ebuild
@@ -13,13 +13,12 @@ if [ "${PV}" = "9999" ]; then
 	inherit git-r3
 	EGIT_REPO_URI="https://w1.fi/hostap.git"
 else
-	KEYWORDS="~alpha amd64 ~arm arm64 ~ia64 ~mips ppc ~ppc64 ~riscv ~sparc x86"
+	KEYWORDS="~alpha amd64 arm arm64 ~ia64 ~mips ppc ppc64 ~riscv ~sparc x86"
 	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
-	SRC_URI+=" https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${PN}-2.9-r3-patches.tar.bz2"
 fi
 
 SLOT="0"
-IUSE="ap +crda broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls uncommon-eap-types wimax wps"
+IUSE="ap +crda broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls tkip uncommon-eap-types wep wimax wps"
 
 # CONFIG_PRIVSEP=y does not have sufficient support for the new driver
 # interface functions used for MACsec, so this combination cannot be used
@@ -274,9 +273,23 @@ src_configure() {
 	Kconfig_style_config OWE
 	Kconfig_style_config SAE
 	Kconfig_style_config DPP
+	Kconfig_style_config DPP2
 	Kconfig_style_config SUITEB192
 	Kconfig_style_config SUITEB
 
+	if use wep ; then
+		Kconfig_style_config WEP
+	else
+		Kconfig_style_config WEP n
+	fi
+
+	# Watch out, reversed logic
+	if use tkip ; then
+		Kconfig_style_config NO_TKIP n
+	else
+		Kconfig_style_config NO_TKIP
+	fi
+
 	if use smartcard ; then
 		Kconfig_style_config SMARTCARD
 	else


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2022-03-13  2:45 Quentin Retornaz
  0 siblings, 0 replies; 19+ messages in thread
From: Quentin Retornaz @ 2022-03-13  2:45 UTC (permalink / raw
  To: gentoo-commits

commit:     7b7fb1a074e0be521e27827086386cb423b6a7eb
Author:     Mike Skec <skec <AT> protonmail <DOT> ch>
AuthorDate: Thu Mar 10 07:14:19 2022 +0000
Commit:     Quentin Retornaz <gentoo <AT> retornaz <DOT> com>
CommitDate: Sun Mar 13 02:44:37 2022 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=7b7fb1a0

net-wireless/wpa_supplicant: updated to 2.10

Signed-off-by: Mike Skec <skec <AT> protonmail.ch>
Closes: https://github.com/gentoo/libressl/pull/381
Signed-off-by: Quentin Retornaz <gentoo <AT> retornaz.com>

 net-wireless/wpa_supplicant/Manifest               |   1 +
 .../wpa_supplicant/wpa_supplicant-2.10.ebuild      | 485 +++++++++++++++++++++
 2 files changed, 486 insertions(+)

diff --git a/net-wireless/wpa_supplicant/Manifest b/net-wireless/wpa_supplicant/Manifest
index 587047b..99b29ae 100644
--- a/net-wireless/wpa_supplicant/Manifest
+++ b/net-wireless/wpa_supplicant/Manifest
@@ -1,2 +1,3 @@
+DIST wpa_supplicant-2.10.tar.gz 3511622 BLAKE2B 7f6045e5dcf24f7ccf1ea75c99541f9d68fadaea858a6ca11a95c997de14e33b3aa89138e748664579b5a4ea493d247cf6613da3c5fae49a4dbb5cd58dace752 SHA512 021c2a48f45d39c1dc6557730be5debaee071bc0ff82a271638beee6e32314e353e49d39e2f0dc8dff6e094dcc7008cfe1c32d0c7a34a1a345a12a3f1c1e11a1
 DIST wpa_supplicant-2.9-r3-patches.tar.bz2 5266 BLAKE2B 284fdeaf6328c35b1f5e88075c62c3b008ec2c400b0cc163a59d9cf8d7c356c3e58f8798e5bade102259d2e5be2ed298b63a0001d0a4ab71d90604a8ee8bf274 SHA512 80e4950ddc99d1134a29a3e5a39767c756f7c9f9f283749e688db3435184631f0384b78954f926724ceff86c96d05b4fb042160265e9d00f976a96e864b7ecc5
 DIST wpa_supplicant-2.9.tar.gz 3231785 BLAKE2B f1e2a5cb37b02d5c74116b5bc7f67c47d85f916c972cbd6b881d63a317161294a37c8517aabe6c74f9617c762aaa76d869f318af311473160e87bac8ac2a1807 SHA512 37a33f22cab9d27084fbef29856eaea0f692ff339c5b38bd32402dccf293cb849afd4a870cd3b5ca78179f0102f4011ce2f3444a53dc41dc75a5863b0a2226c8

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10.ebuild
new file mode 100644
index 0000000..2aa4e4e
--- /dev/null
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.10.ebuild
@@ -0,0 +1,485 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit desktop linux-info qmake-utils readme.gentoo-r1 systemd toolchain-funcs
+
+DESCRIPTION="IEEE 802.1X/WPA supplicant for secure wireless transfers"
+HOMEPAGE="https://w1.fi/wpa_supplicant/"
+LICENSE="|| ( GPL-2 BSD )"
+
+if [ "${PV}" = "9999" ]; then
+	inherit git-r3
+	EGIT_REPO_URI="https://w1.fi/hostap.git"
+else
+	KEYWORDS="~alpha amd64 ~arm arm64 ~ia64 ~mips ppc ~ppc64 ~riscv ~sparc x86"
+	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
+	SRC_URI+=" https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${PN}-2.9-r3-patches.tar.bz2"
+fi
+
+SLOT="0"
+IUSE="ap +crda broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls uncommon-eap-types wimax wps"
+
+# CONFIG_PRIVSEP=y does not have sufficient support for the new driver
+# interface functions used for MACsec, so this combination cannot be used
+# at least for now. bug #684442
+REQUIRED_USE="
+	macsec? ( !privsep )
+	privsep? ( !macsec )
+	broadcom-sta? ( !fils !mesh !mbo )
+"
+
+DEPEND="
+	>=dev-libs/openssl-1.0.2k:=
+	dbus? ( sys-apps/dbus )
+	kernel_linux? (
+		>=dev-libs/libnl-3.2:3
+		eap-sim? ( sys-apps/pcsc-lite )
+	)
+	!kernel_linux? ( net-libs/libpcap )
+	qt5? (
+		dev-qt/qtcore:5
+		dev-qt/qtgui:5
+		dev-qt/qtsvg:5
+		dev-qt/qtwidgets:5
+	)
+	readline? (
+		sys-libs/ncurses:0=
+		sys-libs/readline:0=
+	)
+"
+RDEPEND="${DEPEND}
+	selinux? ( sec-policy/selinux-networkmanager )
+	kernel_linux? (
+		net-wireless/wireless-regdb
+		crda? ( net-wireless/crda )
+	)
+"
+BDEPEND="virtual/pkgconfig"
+
+DOC_CONTENTS="
+	If this is a clean installation of wpa_supplicant, you
+	have to create a configuration file named
+	${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf
+	An example configuration file is available for reference in
+	${EROOT}/usr/share/doc/${PF}/
+"
+
+S="${WORKDIR}/${P}/${PN}"
+
+Kconfig_style_config() {
+		#param 1 is CONFIG_* item
+		#param 2 is what to set it = to, defaulting in y
+		CONFIG_PARAM="${CONFIG_HEADER:-CONFIG_}$1"
+		setting="${2:-y}"
+
+		if [ ! $setting = n ]; then
+			#first remove any leading "# " if $2 is not n
+			sed -i "/^# *$CONFIG_PARAM=/s/^# *//" .config || echo "Kconfig_style_config error uncommenting $CONFIG_PARAM"
+			#set item = $setting (defaulting to y)
+			sed -i "/^$CONFIG_PARAM/s/=.*/=$setting/" .config || echo "Kconfig_style_config error setting $CONFIG_PARAM=$setting"
+			if [ -z "$( grep ^$CONFIG_PARAM= .config )" ] ; then
+				echo "$CONFIG_PARAM=$setting" >>.config
+			fi
+		else
+			#ensure item commented out
+			sed -i "/^$CONFIG_PARAM/s/$CONFIG_PARAM/# $CONFIG_PARAM/" .config || echo "Kconfig_style_config error commenting $CONFIG_PARAM"
+		fi
+}
+
+pkg_pretend() {
+	CONFIG_CHECK=""
+
+	if use crda ; then
+		CONFIG_CHECK="${CONFIG_CHECK} ~CFG80211_CRDA_SUPPORT"
+		WARNING_CFG80211_CRDA_SUPPORT="REGULATORY DOMAIN PROBLEM: please enable CFG80211_CRDA_SUPPORT for proper regulatory domain support"
+	fi
+
+	check_extra_config
+
+	if ! use crda ; then
+		if linux_config_exists && linux_chkconfig_builtin CFG80211 &&
+			[[ $(linux_chkconfig_string EXTRA_FIRMWARE) != *regulatory.db* ]]
+		then
+			ewarn "REGULATORY DOMAIN PROBLEM:"
+			ewarn "With CONFIG_CFG80211=y (built-in), the driver won't be able to load regulatory.db from"
+			ewarn " /lib/firmware, resulting in broken regulatory domain support.  Please set CONFIG_CFG80211=m"
+			ewarn " or add regulatory.db and regulatory.db.p7s to CONFIG_EXTRA_FIRMWARE."
+		fi
+	fi
+}
+
+src_prepare() {
+	default
+
+	# net/bpf.h needed for net-libs/libpcap on Gentoo/FreeBSD
+	sed -i \
+		-e "s:\(#include <pcap\.h>\):#include <net/bpf.h>\n\1:" \
+		../src/l2_packet/l2_packet_freebsd.c || die
+
+	# People seem to take the example configuration file too literally (bug #102361)
+	sed -i \
+		-e "s:^\(opensc_engine_path\):#\1:" \
+		-e "s:^\(pkcs11_engine_path\):#\1:" \
+		-e "s:^\(pkcs11_module_path\):#\1:" \
+		wpa_supplicant.conf || die
+
+	# Change configuration to match Gentoo locations (bug #143750)
+	sed -i \
+		-e "s:/usr/lib/opensc:/usr/$(get_libdir):" \
+		-e "s:/usr/lib/pkcs11:/usr/$(get_libdir):" \
+		wpa_supplicant.conf || die
+
+	# systemd entries to D-Bus service files (bug #372877)
+	echo 'SystemdService=wpa_supplicant.service' \
+		| tee -a dbus/*.service >/dev/null || die
+
+	cd "${WORKDIR}/${P}" || die
+
+	if use wimax; then
+		# generate-libeap-peer.patch comes before
+		# fix-undefined-reference-to-random_get_bytes.patch
+		eapply "${FILESDIR}/${P}-generate-libeap-peer.patch"
+
+		# multilib-strict fix (bug #373685)
+		sed -e "s/\/usr\/lib/\/usr\/$(get_libdir)/" -i src/eap_peer/Makefile || die
+	fi
+
+	# bug (320097)
+	eapply "${FILESDIR}/${PN}-2.6-do-not-call-dbus-functions-with-NULL-path.patch"
+
+	# bug (640492)
+	sed -i 's#-Werror ##' wpa_supplicant/Makefile || die
+
+	# LibreSSL patch (https://github.com/gentoo/libressl/issues/336)
+	eapply "${FILESDIR}/${PN}-2.9-libressl.patch"
+}
+
+src_configure() {
+	# Toolchain setup
+	tc-export CC PKG_CONFIG
+
+	cp defconfig .config || die
+
+	# Basic setup
+	Kconfig_style_config CTRL_IFACE
+	Kconfig_style_config MATCH_IFACE
+	Kconfig_style_config BACKEND file
+	Kconfig_style_config IBSS_RSN
+	Kconfig_style_config IEEE80211W
+	Kconfig_style_config IEEE80211R
+	Kconfig_style_config HT_OVERRIDES
+	Kconfig_style_config VHT_OVERRIDES
+	Kconfig_style_config OCV
+	Kconfig_style_config TLSV11
+	Kconfig_style_config TLSV12
+	Kconfig_style_config GETRANDOM
+
+	# Basic authentication methods
+	# NOTE: we don't set GPSK or SAKE as they conflict
+	# with the below options
+	Kconfig_style_config EAP_GTC
+	Kconfig_style_config EAP_MD5
+	Kconfig_style_config EAP_OTP
+	Kconfig_style_config EAP_PAX
+	Kconfig_style_config EAP_PSK
+	Kconfig_style_config EAP_TLV
+	Kconfig_style_config EAP_EXE
+	Kconfig_style_config IEEE8021X_EAPOL
+	Kconfig_style_config PKCS12
+	Kconfig_style_config PEERKEY
+	Kconfig_style_config EAP_LEAP
+	Kconfig_style_config EAP_MSCHAPV2
+	Kconfig_style_config EAP_PEAP
+	Kconfig_style_config EAP_TEAP
+	Kconfig_style_config EAP_TLS
+	Kconfig_style_config EAP_TTLS
+
+	# Enabling background scanning.
+	Kconfig_style_config BGSCAN_SIMPLE
+	Kconfig_style_config BGSCAN_LEARN
+
+	if use dbus ; then
+		Kconfig_style_config CTRL_IFACE_DBUS
+		Kconfig_style_config CTRL_IFACE_DBUS_NEW
+		Kconfig_style_config CTRL_IFACE_DBUS_INTRO
+	else
+		Kconfig_style_config CTRL_IFACE_DBUS n
+		Kconfig_style_config CTRL_IFACE_DBUS_NEW n
+		Kconfig_style_config CTRL_IFACE_DBUS_INTRO n
+	fi
+
+	if use eapol-test ; then
+		Kconfig_style_config EAPOL_TEST
+	fi
+
+	# Enable support for writing debug info to a log file and syslog.
+	Kconfig_style_config DEBUG_FILE
+	Kconfig_style_config DEBUG_SYSLOG
+
+	if use hs2-0 ; then
+		Kconfig_style_config INTERWORKING
+		Kconfig_style_config HS20
+	fi
+
+	if use mbo ; then
+		Kconfig_style_config MBO
+	else
+		Kconfig_style_config MBO n
+	fi
+
+	if use uncommon-eap-types; then
+		Kconfig_style_config EAP_GPSK
+		Kconfig_style_config EAP_SAKE
+		Kconfig_style_config EAP_GPSK_SHA256
+		Kconfig_style_config EAP_IKEV2
+		Kconfig_style_config EAP_EKE
+	fi
+
+	if use eap-sim ; then
+		# Smart card authentication
+		Kconfig_style_config EAP_SIM
+		Kconfig_style_config EAP_AKA
+		Kconfig_style_config EAP_AKA_PRIME
+		Kconfig_style_config PCSC
+	fi
+
+	if use fasteap ; then
+		Kconfig_style_config EAP_FAST
+	fi
+
+	if use readline ; then
+		# readline/history support for wpa_cli
+		Kconfig_style_config READLINE
+	else
+		#internal line edit mode for wpa_cli
+		Kconfig_style_config WPA_CLI_EDIT
+	fi
+
+	Kconfig_style_config TLS openssl
+	Kconfig_style_config FST
+
+	Kconfig_style_config EAP_PWD
+	if use fils; then
+		Kconfig_style_config FILS
+		Kconfig_style_config FILS_SK_PFS
+	fi
+	if use mesh; then
+		Kconfig_style_config MESH
+	else
+		Kconfig_style_config MESH n
+	fi
+	# WPA3
+	Kconfig_style_config OWE
+	Kconfig_style_config SAE
+	Kconfig_style_config DPP
+	Kconfig_style_config SUITEB192
+	Kconfig_style_config SUITEB
+
+	if use smartcard ; then
+		Kconfig_style_config SMARTCARD
+	else
+		Kconfig_style_config SMARTCARD n
+	fi
+
+	if use tdls ; then
+		Kconfig_style_config TDLS
+	fi
+
+	if use kernel_linux ; then
+		# Linux specific drivers
+		Kconfig_style_config DRIVER_ATMEL
+		Kconfig_style_config DRIVER_HOSTAP
+		Kconfig_style_config DRIVER_IPW
+		Kconfig_style_config DRIVER_NL80211
+		Kconfig_style_config DRIVER_RALINK
+		Kconfig_style_config DRIVER_WEXT
+		Kconfig_style_config DRIVER_WIRED
+
+		if use macsec ; then
+			#requires something, no idea what
+			#Kconfig_style_config DRIVER_MACSEC_QCA
+			Kconfig_style_config DRIVER_MACSEC_LINUX
+			Kconfig_style_config MACSEC
+		else
+			# bug #831369 and bug #684442
+			Kconfig_style_config DRIVER_MACSEC_LINUX n
+			Kconfig_style_config MACSEC n
+		fi
+
+		if use ps3 ; then
+			Kconfig_style_config DRIVER_PS3
+		fi
+	fi
+
+	# Wi-Fi Protected Setup (WPS)
+	if use wps ; then
+		Kconfig_style_config WPS
+		Kconfig_style_config WPS2
+		# USB Flash Drive
+		Kconfig_style_config WPS_UFD
+		# External Registrar
+		Kconfig_style_config WPS_ER
+		# Universal Plug'n'Play
+		Kconfig_style_config WPS_UPNP
+		# Near Field Communication
+		Kconfig_style_config WPS_NFC
+	else
+		Kconfig_style_config WPS n
+		Kconfig_style_config WPS2 n
+		Kconfig_style_config WPS_UFD n
+		Kconfig_style_config WPS_ER n
+		Kconfig_style_config WPS_UPNP n
+		Kconfig_style_config WPS_NFC n
+	fi
+
+	# Wi-Fi Direct (WiDi)
+	if use p2p ; then
+		Kconfig_style_config P2P
+		Kconfig_style_config WIFI_DISPLAY
+	else
+		Kconfig_style_config P2P n
+		Kconfig_style_config WIFI_DISPLAY n
+	fi
+
+	# Access Point Mode
+	if use ap ; then
+		Kconfig_style_config AP
+	else
+		Kconfig_style_config AP n
+	fi
+
+	# Enable essentials for AP/P2P
+	if use ap || use p2p ; then
+		# Enabling HT support (802.11n)
+		Kconfig_style_config IEEE80211N
+
+		# Enabling VHT support (802.11ac)
+		Kconfig_style_config IEEE80211AC
+	fi
+
+	# Enable mitigation against certain attacks against TKIP
+	Kconfig_style_config DELAYED_MIC_ERROR_REPORT
+
+	if use privsep ; then
+		Kconfig_style_config PRIVSEP
+	fi
+
+	if use kernel_linux ; then
+		Kconfig_style_config LIBNL32
+	fi
+
+	if use qt5 ; then
+		pushd "${S}"/wpa_gui-qt4 > /dev/null || die
+		eqmake5 wpa_gui.pro
+		popd > /dev/null || die
+	fi
+}
+
+src_compile() {
+	einfo "Building wpa_supplicant"
+	emake V=1 BINDIR=/usr/sbin
+
+	if use wimax; then
+		emake -C ../src/eap_peer clean
+		emake -C ../src/eap_peer
+	fi
+
+	if use qt5; then
+		einfo "Building wpa_gui"
+		emake -C "${S}"/wpa_gui-qt4
+	fi
+
+	if use eapol-test ; then
+		emake eapol_test
+	fi
+}
+
+src_install() {
+	dosbin wpa_supplicant
+	use privsep && dosbin wpa_priv
+	dobin wpa_cli wpa_passphrase
+
+	# baselayout-1 compat
+	if has_version "<sys-apps/baselayout-2.0.0"; then
+		dodir /sbin
+		dosym ../usr/sbin/wpa_supplicant /sbin/wpa_supplicant
+		dodir /bin
+		dosym ../usr/bin/wpa_cli /bin/wpa_cli
+	fi
+
+	if has_version ">=sys-apps/openrc-0.5.0"; then
+		newinitd "${FILESDIR}/${PN}-init.d" wpa_supplicant
+		newconfd "${FILESDIR}/${PN}-conf.d" wpa_supplicant
+	fi
+
+	exeinto /etc/wpa_supplicant/
+	newexe "${FILESDIR}/wpa_cli.sh" wpa_cli.sh
+
+	readme.gentoo_create_doc
+	dodoc ChangeLog {eap_testing,todo}.txt README{,-WPS} \
+		wpa_supplicant.conf
+
+	newdoc .config build-config
+
+	if [ "${PV}" != "9999" ]; then
+		doman doc/docbook/*.{5,8}
+	fi
+
+	if use qt5 ; then
+		into /usr
+		dobin wpa_gui-qt4/wpa_gui
+		doicon wpa_gui-qt4/icons/wpa_gui.svg
+		domenu wpa_gui-qt4/wpa_gui.desktop
+	else
+		rm "${ED}"/usr/share/man/man8/wpa_gui.8
+	fi
+
+	use wimax && emake DESTDIR="${D}" -C ../src/eap_peer install
+
+	if use dbus ; then
+		pushd "${S}"/dbus > /dev/null || die
+		insinto /etc/dbus-1/system.d
+		newins dbus-wpa_supplicant.conf wpa_supplicant.conf
+		insinto /usr/share/dbus-1/system-services
+		doins fi.w1.wpa_supplicant1.service
+		popd > /dev/null || die
+
+		# This unit relies on dbus support, bug 538600.
+		systemd_dounit systemd/wpa_supplicant.service
+	fi
+
+	if use eapol-test ; then
+		dobin eapol_test
+	fi
+
+	systemd_dounit "systemd/wpa_supplicant@.service"
+	systemd_dounit "systemd/wpa_supplicant-nl80211@.service"
+	systemd_dounit "systemd/wpa_supplicant-wired@.service"
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+
+	if [[ -e "${EROOT}"/etc/wpa_supplicant.conf ]] ; then
+		echo
+		ewarn "WARNING: your old configuration file ${EROOT}/etc/wpa_supplicant.conf"
+		ewarn "needs to be moved to ${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf"
+	fi
+
+	# Mea culpa, feel free to remove that after some time --mgorny.
+	local fn
+	for fn in wpa_supplicant{,@wlan0}.service; do
+		if [[ -e "${EROOT}"/etc/systemd/system/network.target.wants/${fn} ]]
+		then
+			ebegin "Moving ${fn} to multi-user.target"
+			mv "${EROOT}"/etc/systemd/system/network.target.wants/${fn} \
+				"${EROOT}"/etc/systemd/system/multi-user.target.wants/ || die
+			eend ${?} \
+				"Please try to re-enable ${fn}"
+		fi
+	done
+
+	systemd_reenable wpa_supplicant.service
+}


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2021-06-24 16:52 Quentin Retornaz
  0 siblings, 0 replies; 19+ messages in thread
From: Quentin Retornaz @ 2021-06-24 16:52 UTC (permalink / raw
  To: gentoo-commits

commit:     a8b9b643a09436388d1abae2147306b981def9c5
Author:     Quentin Retornaz <gentoo <AT> retornaz <DOT> com>
AuthorDate: Thu Jun 24 16:45:07 2021 +0000
Commit:     Quentin Retornaz <gentoo <AT> retornaz <DOT> com>
CommitDate: Thu Jun 24 16:45:36 2021 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=a8b9b643

net-wireless/wpa_supplicant: revbump to 2.9-r5

Closes: https://github.com/gentoo/libressl/pull/344
Closes: https://github.com/gentoo/libressl/pull/342

Package-Manager: Portage-3.0.20, Repoman-3.0.2
Signed-off-by: Quentin Retornaz <gentoo <AT> retornaz.com>

 net-wireless/wpa_supplicant/Manifest               |   1 +
 .../wpa_supplicant/wpa_supplicant-2.9-r5.ebuild    | 478 +++++++++++++++++++++
 2 files changed, 479 insertions(+)

diff --git a/net-wireless/wpa_supplicant/Manifest b/net-wireless/wpa_supplicant/Manifest
index 07c6500..587047b 100644
--- a/net-wireless/wpa_supplicant/Manifest
+++ b/net-wireless/wpa_supplicant/Manifest
@@ -1 +1,2 @@
+DIST wpa_supplicant-2.9-r3-patches.tar.bz2 5266 BLAKE2B 284fdeaf6328c35b1f5e88075c62c3b008ec2c400b0cc163a59d9cf8d7c356c3e58f8798e5bade102259d2e5be2ed298b63a0001d0a4ab71d90604a8ee8bf274 SHA512 80e4950ddc99d1134a29a3e5a39767c756f7c9f9f283749e688db3435184631f0384b78954f926724ceff86c96d05b4fb042160265e9d00f976a96e864b7ecc5
 DIST wpa_supplicant-2.9.tar.gz 3231785 BLAKE2B f1e2a5cb37b02d5c74116b5bc7f67c47d85f916c972cbd6b881d63a317161294a37c8517aabe6c74f9617c762aaa76d869f318af311473160e87bac8ac2a1807 SHA512 37a33f22cab9d27084fbef29856eaea0f692ff339c5b38bd32402dccf293cb849afd4a870cd3b5ca78179f0102f4011ce2f3444a53dc41dc75a5863b0a2226c8

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.9-r5.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.9-r5.ebuild
new file mode 100644
index 0000000..50765e1
--- /dev/null
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.9-r5.ebuild
@@ -0,0 +1,478 @@
+# Copyright 1999-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit desktop qmake-utils readme.gentoo-r1 systemd toolchain-funcs
+
+DESCRIPTION="IEEE 802.1X/WPA supplicant for secure wireless transfers"
+HOMEPAGE="https://w1.fi/wpa_supplicant/"
+LICENSE="|| ( GPL-2 BSD )"
+
+if [ "${PV}" = "9999" ]; then
+	inherit git-r3
+	EGIT_REPO_URI="https://w1.fi/hostap.git"
+else
+	KEYWORDS="~alpha amd64 arm arm64 ~ia64 ~mips ppc ppc64 ~sparc x86"
+	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
+	SRC_URI+=" https://dev.gentoo.org/~sam/distfiles/${CATEGORY}/${PN}/${PN}-2.9-r3-patches.tar.bz2"
+fi
+
+SLOT="0"
+IUSE="ap bindist broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls uncommon-eap-types wimax wps kernel_linux kernel_FreeBSD"
+
+# CONFIG_PRIVSEP=y does not have sufficient support for the new driver
+# interface functions used for MACsec, so this combination cannot be used
+# at least for now.
+REQUIRED_USE="
+	macsec? ( !privsep )
+	privsep? ( !macsec )
+	broadcom-sta? ( !fils !mesh !mbo )
+"
+
+DEPEND="
+	>=dev-libs/openssl-1.0.2k:0=[bindist(-)=]
+	dbus? ( sys-apps/dbus )
+	kernel_linux? (
+		dev-libs/libnl:3
+		net-wireless/crda
+		eap-sim? ( sys-apps/pcsc-lite )
+	)
+	!kernel_linux? ( net-libs/libpcap )
+	qt5? (
+		dev-qt/qtcore:5
+		dev-qt/qtgui:5
+		dev-qt/qtsvg:5
+		dev-qt/qtwidgets:5
+	)
+	readline? (
+		sys-libs/ncurses:0=
+		sys-libs/readline:0=
+	)
+"
+RDEPEND="${DEPEND}
+	selinux? ( sec-policy/selinux-networkmanager )
+"
+BDEPEND="virtual/pkgconfig"
+
+DOC_CONTENTS="
+	If this is a clean installation of wpa_supplicant, you
+	have to create a configuration file named
+	${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf
+	An example configuration file is available for reference in
+	${EROOT}/usr/share/doc/${PF}/
+"
+
+S="${WORKDIR}/${P}/${PN}"
+
+Kconfig_style_config() {
+		#param 1 is CONFIG_* item
+		#param 2 is what to set it = to, defaulting in y
+		CONFIG_PARAM="${CONFIG_HEADER:-CONFIG_}$1"
+		setting="${2:-y}"
+
+		if [ ! $setting = n ]; then
+			#first remove any leading "# " if $2 is not n
+			sed -i "/^# *$CONFIG_PARAM=/s/^# *//" .config || echo "Kconfig_style_config error uncommenting $CONFIG_PARAM"
+			#set item = $setting (defaulting to y)
+			sed -i "/^$CONFIG_PARAM/s/=.*/=$setting/" .config || echo "Kconfig_style_config error setting $CONFIG_PARAM=$setting"
+			if [ -z "$( grep ^$CONFIG_PARAM= .config )" ] ; then
+				echo "$CONFIG_PARAM=$setting" >>.config
+			fi
+		else
+			#ensure item commented out
+			sed -i "/^$CONFIG_PARAM/s/$CONFIG_PARAM/# $CONFIG_PARAM/" .config || echo "Kconfig_style_config error commenting $CONFIG_PARAM"
+		fi
+}
+
+src_prepare() {
+	default
+
+	# net/bpf.h needed for net-libs/libpcap on Gentoo/FreeBSD
+	sed -i \
+		-e "s:\(#include <pcap\.h>\):#include <net/bpf.h>\n\1:" \
+		../src/l2_packet/l2_packet_freebsd.c || die
+
+	# People seem to take the example configuration file too literally (bug #102361)
+	sed -i \
+		-e "s:^\(opensc_engine_path\):#\1:" \
+		-e "s:^\(pkcs11_engine_path\):#\1:" \
+		-e "s:^\(pkcs11_module_path\):#\1:" \
+		wpa_supplicant.conf || die
+
+	# Change configuration to match Gentoo locations (bug #143750)
+	sed -i \
+		-e "s:/usr/lib/opensc:/usr/$(get_libdir):" \
+		-e "s:/usr/lib/pkcs11:/usr/$(get_libdir):" \
+		wpa_supplicant.conf || die
+
+	# systemd entries to D-Bus service files (bug #372877)
+	echo 'SystemdService=wpa_supplicant.service' \
+		| tee -a dbus/*.service >/dev/null || die
+
+	cd "${WORKDIR}/${P}" || die
+
+	if use wimax; then
+		# generate-libeap-peer.patch comes before
+		# fix-undefined-reference-to-random_get_bytes.patch
+		eapply "${FILESDIR}/${P}-generate-libeap-peer.patch"
+
+		# multilib-strict fix (bug #373685)
+		sed -e "s/\/usr\/lib/\/usr\/$(get_libdir)/" -i src/eap_peer/Makefile || die
+	fi
+
+	# bug (320097)
+	eapply "${FILESDIR}/${PN}-2.6-do-not-call-dbus-functions-with-NULL-path.patch"
+
+	# bug (640492)
+	sed -i 's#-Werror ##' wpa_supplicant/Makefile || die
+
+	## Security patches
+	# CVE-2019-16275 (bug #696030)
+	eapply "${FILESDIR}/wpa_supplicant-2.9-AP-Silently-ignore-management-frame-from-unexpected.patch"
+	# 2020-2, 2021-1 security advisories (bug #768759)
+	eapply "${WORKDIR}"/wpa_supplicant-2.9-r3-patches/security-{2020-2,2021-1}/*.patch
+	# CVE-2021-30004 (bug #780138)
+	eapply "${WORKDIR}"/wpa_supplicant-2.9-r3-patches/misc/CVE-2021-30004.patch
+
+	# libressl patch (https://github.com/gentoo/libressl/issues/336)
+	eapply "${FILESDIR}/${P}-libressl.patch"
+}
+
+src_configure() {
+	# Toolchain setup
+	tc-export CC PKG_CONFIG
+
+	cp defconfig .config || die
+
+	# Basic setup
+	Kconfig_style_config CTRL_IFACE
+	Kconfig_style_config MATCH_IFACE
+	Kconfig_style_config BACKEND file
+	Kconfig_style_config IBSS_RSN
+	Kconfig_style_config IEEE80211W
+	Kconfig_style_config IEEE80211R
+	Kconfig_style_config HT_OVERRIDES
+	Kconfig_style_config VHT_OVERRIDES
+	Kconfig_style_config OCV
+	Kconfig_style_config TLSV11
+	Kconfig_style_config TLSV12
+	Kconfig_style_config GETRANDOM
+
+	# Basic authentication methods
+	# NOTE: we don't set GPSK or SAKE as they conflict
+	# with the below options
+	Kconfig_style_config EAP_GTC
+	Kconfig_style_config EAP_MD5
+	Kconfig_style_config EAP_OTP
+	Kconfig_style_config EAP_PAX
+	Kconfig_style_config EAP_PSK
+	Kconfig_style_config EAP_TLV
+	Kconfig_style_config EAP_EXE
+	Kconfig_style_config IEEE8021X_EAPOL
+	Kconfig_style_config PKCS12
+	Kconfig_style_config PEERKEY
+	Kconfig_style_config EAP_LEAP
+	Kconfig_style_config EAP_MSCHAPV2
+	Kconfig_style_config EAP_PEAP
+	Kconfig_style_config EAP_TEAP
+	Kconfig_style_config EAP_TLS
+	Kconfig_style_config EAP_TTLS
+
+	# Enabling background scanning.
+	Kconfig_style_config BGSCAN_SIMPLE
+	Kconfig_style_config BGSCAN_LEARN
+
+	if use dbus ; then
+		Kconfig_style_config CTRL_IFACE_DBUS
+		Kconfig_style_config CTRL_IFACE_DBUS_NEW
+		Kconfig_style_config CTRL_IFACE_DBUS_INTRO
+	else
+		Kconfig_style_config CTRL_IFACE_DBUS n
+		Kconfig_style_config CTRL_IFACE_DBUS_NEW n
+		Kconfig_style_config CTRL_IFACE_DBUS_INTRO n
+	fi
+
+	if use eapol-test ; then
+		Kconfig_style_config EAPOL_TEST
+	fi
+
+	# Enable support for writing debug info to a log file and syslog.
+	Kconfig_style_config DEBUG_FILE
+	Kconfig_style_config DEBUG_SYSLOG
+
+	if use hs2-0 ; then
+		Kconfig_style_config INTERWORKING
+		Kconfig_style_config HS20
+	fi
+
+	if use mbo ; then
+		Kconfig_style_config MBO
+	else
+		Kconfig_style_config MBO n
+	fi
+
+	if use uncommon-eap-types; then
+		Kconfig_style_config EAP_GPSK
+		Kconfig_style_config EAP_SAKE
+		Kconfig_style_config EAP_GPSK_SHA256
+		Kconfig_style_config EAP_IKEV2
+		Kconfig_style_config EAP_EKE
+	fi
+
+	if use eap-sim ; then
+		# Smart card authentication
+		Kconfig_style_config EAP_SIM
+		Kconfig_style_config EAP_AKA
+		Kconfig_style_config EAP_AKA_PRIME
+		Kconfig_style_config PCSC
+	fi
+
+	if use fasteap ; then
+		Kconfig_style_config EAP_FAST
+	fi
+
+	if use readline ; then
+		# readline/history support for wpa_cli
+		Kconfig_style_config READLINE
+	else
+		#internal line edit mode for wpa_cli
+		Kconfig_style_config WPA_CLI_EDIT
+	fi
+
+	Kconfig_style_config TLS openssl
+	Kconfig_style_config FST
+	if ! use bindist ; then
+		Kconfig_style_config EAP_PWD
+		if use fils; then
+			Kconfig_style_config FILS
+			Kconfig_style_config FILS_SK_PFS
+		fi
+		if use mesh; then
+			Kconfig_style_config MESH
+		else
+			Kconfig_style_config MESH n
+		fi
+		#WPA3
+		Kconfig_style_config OWE
+		Kconfig_style_config SAE
+		Kconfig_style_config DPP
+		Kconfig_style_config SUITEB192
+		Kconfig_style_config SUITEB
+	fi
+
+	if use smartcard ; then
+		Kconfig_style_config SMARTCARD
+	else
+		Kconfig_style_config SMARTCARD n
+	fi
+
+	if use tdls ; then
+		Kconfig_style_config TDLS
+	fi
+
+	if use kernel_linux ; then
+		# Linux specific drivers
+		Kconfig_style_config DRIVER_ATMEL
+		Kconfig_style_config DRIVER_HOSTAP
+		Kconfig_style_config DRIVER_IPW
+		Kconfig_style_config DRIVER_NL80211
+		Kconfig_style_config DRIVER_RALINK
+		Kconfig_style_config DRIVER_WEXT
+		Kconfig_style_config DRIVER_WIRED
+
+		if use macsec ; then
+			#requires something, no idea what
+			#Kconfig_style_config DRIVER_MACSEC_QCA
+			Kconfig_style_config DRIVER_MACSEC_LINUX
+			Kconfig_style_config MACSEC
+		fi
+
+		if use ps3 ; then
+			Kconfig_style_config DRIVER_PS3
+		fi
+
+	elif use kernel_FreeBSD ; then
+		# FreeBSD specific driver
+		Kconfig_style_config DRIVER_BSD
+	fi
+
+	# Wi-Fi Protected Setup (WPS)
+	if use wps ; then
+		Kconfig_style_config WPS
+		Kconfig_style_config WPS2
+		# USB Flash Drive
+		Kconfig_style_config WPS_UFD
+		# External Registrar
+		Kconfig_style_config WPS_ER
+		# Universal Plug'n'Play
+		Kconfig_style_config WPS_UPNP
+		# Near Field Communication
+		Kconfig_style_config WPS_NFC
+	else
+		Kconfig_style_config WPS n
+		Kconfig_style_config WPS2 n
+		Kconfig_style_config WPS_UFD n
+		Kconfig_style_config WPS_ER n
+		Kconfig_style_config WPS_UPNP n
+		Kconfig_style_config WPS_NFC n
+	fi
+
+	# Wi-Fi Direct (WiDi)
+	if use p2p ; then
+		Kconfig_style_config P2P
+		Kconfig_style_config WIFI_DISPLAY
+	else
+		Kconfig_style_config P2P n
+		Kconfig_style_config WIFI_DISPLAY n
+	fi
+
+	# Access Point Mode
+	if use ap ; then
+		Kconfig_style_config AP
+	else
+		Kconfig_style_config AP n
+	fi
+
+	# Enable essentials for AP/P2P
+	if use ap || use p2p ; then
+		# Enabling HT support (802.11n)
+		Kconfig_style_config IEEE80211N
+
+		# Enabling VHT support (802.11ac)
+		Kconfig_style_config IEEE80211AC
+	fi
+
+	# Enable mitigation against certain attacks against TKIP
+	Kconfig_style_config DELAYED_MIC_ERROR_REPORT
+
+	if use privsep ; then
+		Kconfig_style_config PRIVSEP
+	fi
+
+	# If we are using libnl 2.0 and above, enable support for it
+	# Bug 382159
+	# Removed for now, since the 3.2 version is broken, and we don't
+	# support it.
+	if has_version ">=dev-libs/libnl-3.2"; then
+		Kconfig_style_config LIBNL32
+	fi
+
+	if use qt5 ; then
+		pushd "${S}"/wpa_gui-qt4 > /dev/null || die
+		eqmake5 wpa_gui.pro
+		popd > /dev/null || die
+	fi
+}
+
+src_compile() {
+	einfo "Building wpa_supplicant"
+	emake V=1 BINDIR=/usr/sbin
+
+	if use wimax; then
+		emake -C ../src/eap_peer clean
+		emake -C ../src/eap_peer
+	fi
+
+	if use qt5; then
+		einfo "Building wpa_gui"
+		emake -C "${S}"/wpa_gui-qt4
+	fi
+
+	if use eapol-test ; then
+		emake eapol_test
+	fi
+}
+
+src_install() {
+	dosbin wpa_supplicant
+	use privsep && dosbin wpa_priv
+	dobin wpa_cli wpa_passphrase
+
+	# baselayout-1 compat
+	if has_version "<sys-apps/baselayout-2.0.0"; then
+		dodir /sbin
+		dosym ../usr/sbin/wpa_supplicant /sbin/wpa_supplicant
+		dodir /bin
+		dosym ../usr/bin/wpa_cli /bin/wpa_cli
+	fi
+
+	if has_version ">=sys-apps/openrc-0.5.0"; then
+		newinitd "${FILESDIR}/${PN}-init.d" wpa_supplicant
+		newconfd "${FILESDIR}/${PN}-conf.d" wpa_supplicant
+	fi
+
+	exeinto /etc/wpa_supplicant/
+	newexe "${FILESDIR}/wpa_cli.sh" wpa_cli.sh
+
+	readme.gentoo_create_doc
+	dodoc ChangeLog {eap_testing,todo}.txt README{,-WPS} \
+		wpa_supplicant.conf
+
+	newdoc .config build-config
+
+	if [ "${PV}" != "9999" ]; then
+		doman doc/docbook/*.{5,8}
+	fi
+
+	if use qt5 ; then
+		into /usr
+		dobin wpa_gui-qt4/wpa_gui
+		doicon wpa_gui-qt4/icons/wpa_gui.svg
+		domenu wpa_gui-qt4/wpa_gui.desktop
+	else
+		rm "${ED}"/usr/share/man/man8/wpa_gui.8
+	fi
+
+	use wimax && emake DESTDIR="${D}" -C ../src/eap_peer install
+
+	if use dbus ; then
+		pushd "${S}"/dbus > /dev/null || die
+		insinto /etc/dbus-1/system.d
+		newins dbus-wpa_supplicant.conf wpa_supplicant.conf
+		insinto /usr/share/dbus-1/system-services
+		doins fi.w1.wpa_supplicant1.service
+		popd > /dev/null || die
+
+		# This unit relies on dbus support, bug 538600.
+		systemd_dounit systemd/wpa_supplicant.service
+	fi
+
+	if use eapol-test ; then
+		dobin eapol_test
+	fi
+
+	systemd_dounit "systemd/wpa_supplicant@.service"
+	systemd_dounit "systemd/wpa_supplicant-nl80211@.service"
+	systemd_dounit "systemd/wpa_supplicant-wired@.service"
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+
+	if [[ -e "${EROOT}"/etc/wpa_supplicant.conf ]] ; then
+		echo
+		ewarn "WARNING: your old configuration file ${EROOT}/etc/wpa_supplicant.conf"
+		ewarn "needs to be moved to ${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf"
+	fi
+
+	if use bindist; then
+		ewarn "Using bindist use flag presently breaks WPA3 (specifically SAE, OWE, DPP, and FILS)."
+		ewarn "This is incredibly undesirable"
+	fi
+
+	# Mea culpa, feel free to remove that after some time --mgorny.
+	local fn
+	for fn in wpa_supplicant{,@wlan0}.service; do
+		if [[ -e "${EROOT}"/etc/systemd/system/network.target.wants/${fn} ]]
+		then
+			ebegin "Moving ${fn} to multi-user.target"
+			mv "${EROOT}"/etc/systemd/system/network.target.wants/${fn} \
+				"${EROOT}"/etc/systemd/system/multi-user.target.wants/ || die
+			eend ${?} \
+				"Please try to re-enable ${fn}"
+		fi
+	done
+
+	systemd_reenable wpa_supplicant.service
+}


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/
@ 2021-06-24 16:52 Quentin Retornaz
  0 siblings, 0 replies; 19+ messages in thread
From: Quentin Retornaz @ 2021-06-24 16:52 UTC (permalink / raw
  To: gentoo-commits

commit:     1e2412a2f1d283f95068f3950a4f9f0a2ee9d00f
Author:     Quentin Retornaz <gentoo <AT> retornaz <DOT> com>
AuthorDate: Thu Jun 24 16:51:54 2021 +0000
Commit:     Quentin Retornaz <gentoo <AT> retornaz <DOT> com>
CommitDate: Thu Jun 24 16:52:08 2021 +0000
URL:        https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=1e2412a2

net-wireless/wpa_supplicant: remove old

Signed-off-by: Quentin Retornaz <gentoo <AT> retornaz.com>

 .../wpa_supplicant/wpa_supplicant-2.9-r2.ebuild    | 472 ---------------------
 1 file changed, 472 deletions(-)

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.9-r2.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.9-r2.ebuild
deleted file mode 100644
index 5098631..0000000
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.9-r2.ebuild
+++ /dev/null
@@ -1,472 +0,0 @@
-# Copyright 1999-2021 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-inherit desktop qmake-utils readme.gentoo-r1 systemd toolchain-funcs
-
-DESCRIPTION="IEEE 802.1X/WPA supplicant for secure wireless transfers"
-HOMEPAGE="https://w1.fi/wpa_supplicant/"
-LICENSE="|| ( GPL-2 BSD )"
-
-if [ "${PV}" = "9999" ]; then
-	inherit git-r3
-	EGIT_REPO_URI="https://w1.fi/hostap.git"
-else
-	KEYWORDS="~alpha amd64 arm arm64 ~ia64 ~mips ppc ppc64 ~sparc x86"
-	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
-fi
-
-SLOT="0"
-IUSE="ap bindist broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls uncommon-eap-types wimax wps kernel_linux kernel_FreeBSD"
-
-# CONFIG_PRIVSEP=y does not have sufficient support for the new driver
-# interface functions used for MACsec, so this combination cannot be used
-# at least for now.
-REQUIRED_USE="
-	macsec? ( !privsep )
-	privsep? ( !macsec )
-	broadcom-sta? ( !fils !mesh !mbo )
-"
-
-DEPEND="
-	>=dev-libs/openssl-1.0.2k:0=[bindist=]
-	dbus? ( sys-apps/dbus )
-	kernel_linux? (
-		dev-libs/libnl:3
-		net-wireless/crda
-		eap-sim? ( sys-apps/pcsc-lite )
-	)
-	!kernel_linux? ( net-libs/libpcap )
-	qt5? (
-		dev-qt/qtcore:5
-		dev-qt/qtgui:5
-		dev-qt/qtsvg:5
-		dev-qt/qtwidgets:5
-	)
-	readline? (
-		sys-libs/ncurses:0=
-		sys-libs/readline:0=
-	)
-"
-RDEPEND="${DEPEND}
-	selinux? ( sec-policy/selinux-networkmanager )
-"
-BDEPEND="virtual/pkgconfig"
-
-DOC_CONTENTS="
-	If this is a clean installation of wpa_supplicant, you
-	have to create a configuration file named
-	${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf
-	An example configuration file is available for reference in
-	${EROOT}/usr/share/doc/${PF}/
-"
-
-S="${WORKDIR}/${P}/${PN}"
-
-Kconfig_style_config() {
-		#param 1 is CONFIG_* item
-		#param 2 is what to set it = to, defaulting in y
-		CONFIG_PARAM="${CONFIG_HEADER:-CONFIG_}$1"
-		setting="${2:-y}"
-
-		if [ ! $setting = n ]; then
-			#first remove any leading "# " if $2 is not n
-			sed -i "/^# *$CONFIG_PARAM=/s/^# *//" .config || echo "Kconfig_style_config error uncommenting $CONFIG_PARAM"
-			#set item = $setting (defaulting to y)
-			sed -i "/^$CONFIG_PARAM/s/=.*/=$setting/" .config || echo "Kconfig_style_config error setting $CONFIG_PARAM=$setting"
-			if [ -z "$( grep ^$CONFIG_PARAM= .config )" ] ; then
-				echo "$CONFIG_PARAM=$setting" >>.config
-			fi
-		else
-			#ensure item commented out
-			sed -i "/^$CONFIG_PARAM/s/$CONFIG_PARAM/# $CONFIG_PARAM/" .config || echo "Kconfig_style_config error commenting $CONFIG_PARAM"
-		fi
-}
-
-src_prepare() {
-	default
-
-	# net/bpf.h needed for net-libs/libpcap on Gentoo/FreeBSD
-	sed -i \
-		-e "s:\(#include <pcap\.h>\):#include <net/bpf.h>\n\1:" \
-		../src/l2_packet/l2_packet_freebsd.c || die
-
-	# People seem to take the example configuration file too literally (bug #102361)
-	sed -i \
-		-e "s:^\(opensc_engine_path\):#\1:" \
-		-e "s:^\(pkcs11_engine_path\):#\1:" \
-		-e "s:^\(pkcs11_module_path\):#\1:" \
-		wpa_supplicant.conf || die
-
-	# Change configuration to match Gentoo locations (bug #143750)
-	sed -i \
-		-e "s:/usr/lib/opensc:/usr/$(get_libdir):" \
-		-e "s:/usr/lib/pkcs11:/usr/$(get_libdir):" \
-		wpa_supplicant.conf || die
-
-	# systemd entries to D-Bus service files (bug #372877)
-	echo 'SystemdService=wpa_supplicant.service' \
-		| tee -a dbus/*.service >/dev/null || die
-
-	cd "${WORKDIR}/${P}" || die
-
-	if use wimax; then
-		# generate-libeap-peer.patch comes before
-		# fix-undefined-reference-to-random_get_bytes.patch
-		eapply "${FILESDIR}/${P}-generate-libeap-peer.patch"
-
-		# multilib-strict fix (bug #373685)
-		sed -e "s/\/usr\/lib/\/usr\/$(get_libdir)/" -i src/eap_peer/Makefile || die
-	fi
-
-	# bug (320097)
-	eapply "${FILESDIR}/${PN}-2.6-do-not-call-dbus-functions-with-NULL-path.patch"
-
-	# bug (640492)
-	sed -i 's#-Werror ##' wpa_supplicant/Makefile || die
-
-	#CVE-2019-16275 bug #696030
-	eapply "${FILESDIR}/wpa_supplicant-2.9-AP-Silently-ignore-management-frame-from-unexpected.patch"
-
-	# libressl patch (https://github.com/gentoo/libressl/issues/336)
-	eapply "${FILESDIR}/${P}-libressl.patch"
-}
-
-src_configure() {
-	# Toolchain setup
-	tc-export CC PKG_CONFIG
-
-	cp defconfig .config || die
-
-	# Basic setup
-	Kconfig_style_config CTRL_IFACE
-	Kconfig_style_config MATCH_IFACE
-	Kconfig_style_config BACKEND file
-	Kconfig_style_config IBSS_RSN
-	Kconfig_style_config IEEE80211W
-	Kconfig_style_config IEEE80211R
-	Kconfig_style_config HT_OVERRIDES
-	Kconfig_style_config VHT_OVERRIDES
-	Kconfig_style_config OCV
-	Kconfig_style_config TLSV11
-	Kconfig_style_config TLSV12
-	Kconfig_style_config GETRANDOM
-
-	# Basic authentication methods
-	# NOTE: we don't set GPSK or SAKE as they conflict
-	# with the below options
-	Kconfig_style_config EAP_GTC
-	Kconfig_style_config EAP_MD5
-	Kconfig_style_config EAP_OTP
-	Kconfig_style_config EAP_PAX
-	Kconfig_style_config EAP_PSK
-	Kconfig_style_config EAP_TLV
-	Kconfig_style_config EAP_EXE
-	Kconfig_style_config IEEE8021X_EAPOL
-	Kconfig_style_config PKCS12
-	Kconfig_style_config PEERKEY
-	Kconfig_style_config EAP_LEAP
-	Kconfig_style_config EAP_MSCHAPV2
-	Kconfig_style_config EAP_PEAP
-	Kconfig_style_config EAP_TEAP
-	Kconfig_style_config EAP_TLS
-	Kconfig_style_config EAP_TTLS
-
-	# Enabling background scanning.
-	Kconfig_style_config BGSCAN_SIMPLE
-	Kconfig_style_config BGSCAN_LEARN
-
-	if use dbus ; then
-		Kconfig_style_config CTRL_IFACE_DBUS
-		Kconfig_style_config CTRL_IFACE_DBUS_NEW
-		Kconfig_style_config CTRL_IFACE_DBUS_INTRO
-	else
-		Kconfig_style_config CTRL_IFACE_DBUS n
-		Kconfig_style_config CTRL_IFACE_DBUS_NEW n
-		Kconfig_style_config CTRL_IFACE_DBUS_INTRO n
-	fi
-
-	if use eapol-test ; then
-		Kconfig_style_config EAPOL_TEST
-	fi
-
-	# Enable support for writing debug info to a log file and syslog.
-	Kconfig_style_config DEBUG_FILE
-	Kconfig_style_config DEBUG_SYSLOG
-
-	if use hs2-0 ; then
-		Kconfig_style_config INTERWORKING
-		Kconfig_style_config HS20
-	fi
-
-	if use mbo ; then
-		Kconfig_style_config MBO
-	else
-		Kconfig_style_config MBO n
-	fi
-
-	if use uncommon-eap-types; then
-		Kconfig_style_config EAP_GPSK
-		Kconfig_style_config EAP_SAKE
-		Kconfig_style_config EAP_GPSK_SHA256
-		Kconfig_style_config EAP_IKEV2
-		Kconfig_style_config EAP_EKE
-	fi
-
-	if use eap-sim ; then
-		# Smart card authentication
-		Kconfig_style_config EAP_SIM
-		Kconfig_style_config EAP_AKA
-		Kconfig_style_config EAP_AKA_PRIME
-		Kconfig_style_config PCSC
-	fi
-
-	if use fasteap ; then
-		Kconfig_style_config EAP_FAST
-	fi
-
-	if use readline ; then
-		# readline/history support for wpa_cli
-		Kconfig_style_config READLINE
-	else
-		#internal line edit mode for wpa_cli
-		Kconfig_style_config WPA_CLI_EDIT
-	fi
-
-	Kconfig_style_config TLS openssl
-	Kconfig_style_config FST
-	if ! use bindist ; then
-		Kconfig_style_config EAP_PWD
-		if use fils; then
-			Kconfig_style_config FILS
-			Kconfig_style_config FILS_SK_PFS
-		fi
-		if use mesh; then
-			Kconfig_style_config MESH
-		else
-			Kconfig_style_config MESH n
-		fi
-		#WPA3
-		Kconfig_style_config OWE
-		Kconfig_style_config SAE
-		Kconfig_style_config DPP
-		Kconfig_style_config SUITEB192
-		Kconfig_style_config SUITEB
-	fi
-
-	if use smartcard ; then
-		Kconfig_style_config SMARTCARD
-	else
-		Kconfig_style_config SMARTCARD n
-	fi
-
-	if use tdls ; then
-		Kconfig_style_config TDLS
-	fi
-
-	if use kernel_linux ; then
-		# Linux specific drivers
-		Kconfig_style_config DRIVER_ATMEL
-		Kconfig_style_config DRIVER_HOSTAP
-		Kconfig_style_config DRIVER_IPW
-		Kconfig_style_config DRIVER_NL80211
-		Kconfig_style_config DRIVER_RALINK
-		Kconfig_style_config DRIVER_WEXT
-		Kconfig_style_config DRIVER_WIRED
-
-		if use macsec ; then
-			#requires something, no idea what
-			#Kconfig_style_config DRIVER_MACSEC_QCA
-			Kconfig_style_config DRIVER_MACSEC_LINUX
-			Kconfig_style_config MACSEC
-		fi
-
-		if use ps3 ; then
-			Kconfig_style_config DRIVER_PS3
-		fi
-
-	elif use kernel_FreeBSD ; then
-		# FreeBSD specific driver
-		Kconfig_style_config DRIVER_BSD
-	fi
-
-	# Wi-Fi Protected Setup (WPS)
-	if use wps ; then
-		Kconfig_style_config WPS
-		Kconfig_style_config WPS2
-		# USB Flash Drive
-		Kconfig_style_config WPS_UFD
-		# External Registrar
-		Kconfig_style_config WPS_ER
-		# Universal Plug'n'Play
-		Kconfig_style_config WPS_UPNP
-		# Near Field Communication
-		Kconfig_style_config WPS_NFC
-	else
-		Kconfig_style_config WPS n
-		Kconfig_style_config WPS2 n
-		Kconfig_style_config WPS_UFD n
-		Kconfig_style_config WPS_ER n
-		Kconfig_style_config WPS_UPNP n
-		Kconfig_style_config WPS_NFC n
-	fi
-
-	# Wi-Fi Direct (WiDi)
-	if use p2p ; then
-		Kconfig_style_config P2P
-		Kconfig_style_config WIFI_DISPLAY
-	else
-		Kconfig_style_config P2P n
-		Kconfig_style_config WIFI_DISPLAY n
-	fi
-
-	# Access Point Mode
-	if use ap ; then
-		Kconfig_style_config AP
-	else
-		Kconfig_style_config AP n
-	fi
-
-	# Enable essentials for AP/P2P
-	if use ap || use p2p ; then
-		# Enabling HT support (802.11n)
-		Kconfig_style_config IEEE80211N
-
-		# Enabling VHT support (802.11ac)
-		Kconfig_style_config IEEE80211AC
-	fi
-
-	# Enable mitigation against certain attacks against TKIP
-	Kconfig_style_config DELAYED_MIC_ERROR_REPORT
-
-	if use privsep ; then
-		Kconfig_style_config PRIVSEP
-	fi
-
-	# If we are using libnl 2.0 and above, enable support for it
-	# Bug 382159
-	# Removed for now, since the 3.2 version is broken, and we don't
-	# support it.
-	if has_version ">=dev-libs/libnl-3.2"; then
-		Kconfig_style_config LIBNL32
-	fi
-
-	if use qt5 ; then
-		pushd "${S}"/wpa_gui-qt4 > /dev/null || die
-		eqmake5 wpa_gui.pro
-		popd > /dev/null || die
-	fi
-}
-
-src_compile() {
-	einfo "Building wpa_supplicant"
-	emake V=1 BINDIR=/usr/sbin
-
-	if use wimax; then
-		emake -C ../src/eap_peer clean
-		emake -C ../src/eap_peer
-	fi
-
-	if use qt5; then
-		einfo "Building wpa_gui"
-		emake -C "${S}"/wpa_gui-qt4
-	fi
-
-	if use eapol-test ; then
-		emake eapol_test
-	fi
-}
-
-src_install() {
-	dosbin wpa_supplicant
-	use privsep && dosbin wpa_priv
-	dobin wpa_cli wpa_passphrase
-
-	# baselayout-1 compat
-	if has_version "<sys-apps/baselayout-2.0.0"; then
-		dodir /sbin
-		dosym ../usr/sbin/wpa_supplicant /sbin/wpa_supplicant
-		dodir /bin
-		dosym ../usr/bin/wpa_cli /bin/wpa_cli
-	fi
-
-	if has_version ">=sys-apps/openrc-0.5.0"; then
-		newinitd "${FILESDIR}/${PN}-init.d" wpa_supplicant
-		newconfd "${FILESDIR}/${PN}-conf.d" wpa_supplicant
-	fi
-
-	exeinto /etc/wpa_supplicant/
-	newexe "${FILESDIR}/wpa_cli.sh" wpa_cli.sh
-
-	readme.gentoo_create_doc
-	dodoc ChangeLog {eap_testing,todo}.txt README{,-WPS} \
-		wpa_supplicant.conf
-
-	newdoc .config build-config
-
-	if [ "${PV}" != "9999" ]; then
-		doman doc/docbook/*.{5,8}
-	fi
-
-	if use qt5 ; then
-		into /usr
-		dobin wpa_gui-qt4/wpa_gui
-		doicon wpa_gui-qt4/icons/wpa_gui.svg
-		domenu wpa_gui-qt4/wpa_gui.desktop
-	else
-		rm "${ED}"/usr/share/man/man8/wpa_gui.8
-	fi
-
-	use wimax && emake DESTDIR="${D}" -C ../src/eap_peer install
-
-	if use dbus ; then
-		pushd "${S}"/dbus > /dev/null || die
-		insinto /etc/dbus-1/system.d
-		newins dbus-wpa_supplicant.conf wpa_supplicant.conf
-		insinto /usr/share/dbus-1/system-services
-		doins fi.w1.wpa_supplicant1.service
-		popd > /dev/null || die
-
-		# This unit relies on dbus support, bug 538600.
-		systemd_dounit systemd/wpa_supplicant.service
-	fi
-
-	if use eapol-test ; then
-		dobin eapol_test
-	fi
-
-	systemd_dounit "systemd/wpa_supplicant@.service"
-	systemd_dounit "systemd/wpa_supplicant-nl80211@.service"
-	systemd_dounit "systemd/wpa_supplicant-wired@.service"
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-
-	if [[ -e "${EROOT}"/etc/wpa_supplicant.conf ]] ; then
-		echo
-		ewarn "WARNING: your old configuration file ${EROOT}/etc/wpa_supplicant.conf"
-		ewarn "needs to be moved to ${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf"
-	fi
-
-	if use bindist; then
-		ewarn "Using bindist use flag presently breaks WPA3 (specifically SAE, OWE, DPP, and FILS)."
-		ewarn "This is incredibly undesirable"
-	fi
-
-	# Mea culpa, feel free to remove that after some time --mgorny.
-	local fn
-	for fn in wpa_supplicant{,@wlan0}.service; do
-		if [[ -e "${EROOT}"/etc/systemd/system/network.target.wants/${fn} ]]
-		then
-			ebegin "Moving ${fn} to multi-user.target"
-			mv "${EROOT}"/etc/systemd/system/network.target.wants/${fn} \
-				"${EROOT}"/etc/systemd/system/multi-user.target.wants/ || die
-			eend ${?} \
-				"Please try to re-enable ${fn}"
-		fi
-	done
-
-	systemd_reenable wpa_supplicant.service
-}


^ permalink raw reply related	[flat|nested] 19+ messages in thread

end of thread, other threads:[~2024-11-12 18:30 UTC | newest]

Thread overview: 19+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-12-25 23:59 [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/wpa_supplicant/ Quentin Retornaz
  -- strict thread matches above, loose matches on Subject: below --
2024-11-12 18:30 orbea
2024-10-30 16:29 orbea
2024-09-26 23:12 orbea
2024-09-13  1:40 orbea
2024-09-13  1:40 orbea
2024-08-01 18:38 orbea
2024-08-01 18:38 orbea
2024-03-10  7:27 orbea
2024-03-10  7:27 orbea
2024-02-25  2:42 orbea
2024-01-14 21:44 orbea
2023-09-25 19:04 orbea
2023-09-19 21:54 orbea
2023-08-24 15:53 orbea
2022-03-19 22:15 Quentin Retornaz
2022-03-13  2:45 Quentin Retornaz
2021-06-24 16:52 Quentin Retornaz
2021-06-24 16:52 Quentin Retornaz

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox