* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2015-08-30 0:16 Mike Frysinger
0 siblings, 0 replies; 59+ messages in thread
From: Mike Frysinger @ 2015-08-30 0:16 UTC (permalink / raw
To: gentoo-commits
commit: b2ad6885bf13456a57e4453c30448cbb097254b4
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Sun Aug 30 00:12:09 2015 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Sun Aug 30 00:12:44 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=b2ad6885
sys-firmware/seabios: add qemu herd
sys-firmware/seabios/metadata.xml | 1 +
1 file changed, 1 insertion(+)
diff --git a/sys-firmware/seabios/metadata.xml b/sys-firmware/seabios/metadata.xml
index 4e341d2..9da40e6 100644
--- a/sys-firmware/seabios/metadata.xml
+++ b/sys-firmware/seabios/metadata.xml
@@ -1,6 +1,7 @@
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd">
<pkgmetadata>
+ <herd>qemu</herd>
<herd>virtualization</herd>
<maintainer>
<email>cardoe@gentoo.org</email>
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2015-08-30 0:27 Mike Frysinger
0 siblings, 0 replies; 59+ messages in thread
From: Mike Frysinger @ 2015-08-30 0:27 UTC (permalink / raw
To: gentoo-commits
commit: 0680193cd7aa2e3e7c1472d31739df157d90e4cb
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Sun Aug 30 00:27:14 2015 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Sun Aug 30 00:27:14 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=0680193c
sys-firmware/seabios: add USE=debug to control debug output levels
sys-firmware/seabios/seabios-1.8.2.ebuild | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/sys-firmware/seabios/seabios-1.8.2.ebuild b/sys-firmware/seabios/seabios-1.8.2.ebuild
index 61b1a8d..23e935b 100644
--- a/sys-firmware/seabios/seabios-1.8.2.ebuild
+++ b/sys-firmware/seabios/seabios-1.8.2.ebuild
@@ -32,9 +32,10 @@ HOMEPAGE="http://www.seabios.org"
LICENSE="LGPL-3 GPL-3"
SLOT="0"
-IUSE="+binary +seavgabios"
+IUSE="+binary debug +seavgabios"
-REQUIRED_USE="ppc? ( binary )
+REQUIRED_USE="debug? ( !binary )
+ ppc? ( binary )
ppc64? ( binary )"
DEPEND="
@@ -73,7 +74,14 @@ src_prepare() {
}
src_configure() {
- use binary || tc-ld-disable-gold #438058
+ use binary && return
+
+ tc-ld-disable-gold #438058
+
+ if use debug ; then
+ echo "CONFIG_DEBUG_LEVEL=8" >.config
+ fi
+ _emake config
}
_emake() {
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2015-09-08 7:19 Agostino Sarubbo
0 siblings, 0 replies; 59+ messages in thread
From: Agostino Sarubbo @ 2015-09-08 7:19 UTC (permalink / raw
To: gentoo-commits
commit: 304e8682e083854a92f4c5aa9da2f7d81d3dd332
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Tue Sep 8 07:19:18 2015 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Tue Sep 8 07:19:18 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=304e8682
sys-firmware/seabios: amd64 stable wrt bug #558416
Package-Manager: portage-2.2.20.1
RepoMan-Options: --include-arches="amd64"
sys-firmware/seabios/seabios-1.8.2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.8.2.ebuild b/sys-firmware/seabios/seabios-1.8.2.ebuild
index 23e935b..8d00d67 100644
--- a/sys-firmware/seabios/seabios-1.8.2.ebuild
+++ b/sys-firmware/seabios/seabios-1.8.2.ebuild
@@ -17,7 +17,7 @@ if [[ ${PV} = *9999* || ! -z "${EGIT_COMMIT}" ]]; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-2
else
- KEYWORDS="~amd64 ~ppc ~ppc64 ~x86 ~amd64-fbsd ~x86-fbsd"
+ KEYWORDS="amd64 ~ppc ~ppc64 ~x86 ~amd64-fbsd ~x86-fbsd"
# Upstream hasn't released a new binary. We snipe ours from Fedora for now.
# http://code.coreboot.org/p/seabios/downloads/get/bios.bin-${PV}.gz
SRC_URI="!binary? ( http://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2015-09-08 7:20 Agostino Sarubbo
0 siblings, 0 replies; 59+ messages in thread
From: Agostino Sarubbo @ 2015-09-08 7:20 UTC (permalink / raw
To: gentoo-commits
commit: 3f15ab57ef225a8ee5e74ad78a3a621ef8f272d8
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Tue Sep 8 07:20:31 2015 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Tue Sep 8 07:20:31 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=3f15ab57
sys-firmware/seabios: x86 stable wrt bug #558416
Package-Manager: portage-2.2.20.1
RepoMan-Options: --include-arches="x86"
sys-firmware/seabios/seabios-1.8.2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.8.2.ebuild b/sys-firmware/seabios/seabios-1.8.2.ebuild
index 8d00d67..b2ad1f2 100644
--- a/sys-firmware/seabios/seabios-1.8.2.ebuild
+++ b/sys-firmware/seabios/seabios-1.8.2.ebuild
@@ -17,7 +17,7 @@ if [[ ${PV} = *9999* || ! -z "${EGIT_COMMIT}" ]]; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-2
else
- KEYWORDS="amd64 ~ppc ~ppc64 ~x86 ~amd64-fbsd ~x86-fbsd"
+ KEYWORDS="amd64 ~ppc ~ppc64 x86 ~amd64-fbsd ~x86-fbsd"
# Upstream hasn't released a new binary. We snipe ours from Fedora for now.
# http://code.coreboot.org/p/seabios/downloads/get/bios.bin-${PV}.gz
SRC_URI="!binary? ( http://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2016-01-04 19:27 Mike Frysinger
0 siblings, 0 replies; 59+ messages in thread
From: Mike Frysinger @ 2016-01-04 19:27 UTC (permalink / raw
To: gentoo-commits
commit: 9ce92a3e0e039149660f833a9fe470d9dc0eb453
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Mon Jan 4 19:23:13 2016 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Mon Jan 4 19:26:56 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=9ce92a3e
sys-firmware/seabios: add keywords for everyone #570876
We invert the REQUIRED_USE logic so it forces USE=binary for all
non-x86 arches. That way installing binaries works regardless of
the architecture.
sys-firmware/seabios/seabios-1.8.2.ebuild | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/sys-firmware/seabios/seabios-1.8.2.ebuild b/sys-firmware/seabios/seabios-1.8.2.ebuild
index 2c8d488..02b9e6f 100644
--- a/sys-firmware/seabios/seabios-1.8.2.ebuild
+++ b/sys-firmware/seabios/seabios-1.8.2.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2015 Gentoo Foundation
+# Copyright 1999-2016 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Id$
@@ -17,7 +17,7 @@ if [[ ${PV} = *9999* || ! -z "${EGIT_COMMIT}" ]]; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-2
else
- KEYWORDS="amd64 ~ppc ~ppc64 x86 ~amd64-fbsd ~x86-fbsd"
+ KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc x86 ~amd64-fbsd ~x86-fbsd"
# Upstream hasn't released a new binary. We snipe ours from Fedora for now.
# http://code.coreboot.org/p/seabios/downloads/get/bios.bin-${PV}.gz
SRC_URI="!binary? ( http://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
@@ -35,14 +35,14 @@ SLOT="0"
IUSE="+binary debug +seavgabios"
REQUIRED_USE="debug? ( !binary )
- ppc? ( binary )
- ppc64? ( binary )"
+ !amd64? ( !x86? ( binary ) )"
+# The amd64/x86 check is needed to workaround #570892.
DEPEND="
- !binary? (
+ amd64? ( x86? ( !binary? (
>=sys-power/iasl-20060912
${PYTHON_DEPS}
- )"
+ ) ) )"
RDEPEND=""
pkg_pretend() {
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2016-01-04 22:26 Mike Frysinger
0 siblings, 0 replies; 59+ messages in thread
From: Mike Frysinger @ 2016-01-04 22:26 UTC (permalink / raw
To: gentoo-commits
commit: c6cca10a3d2219c64ef0bfba54fb82526223c252
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Mon Jan 4 21:01:01 2016 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Mon Jan 4 22:25:36 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c6cca10a
sys-firmware/seabios: fix binary logic #570876#7
Previous commit here incorrectly nested the amd64 & x86 flags.
Reported-by: Mike Gilbert <floppym <AT> gentoo.org>
sys-firmware/seabios/seabios-1.8.2.ebuild | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/sys-firmware/seabios/seabios-1.8.2.ebuild b/sys-firmware/seabios/seabios-1.8.2.ebuild
index 02b9e6f..bc072f1 100644
--- a/sys-firmware/seabios/seabios-1.8.2.ebuild
+++ b/sys-firmware/seabios/seabios-1.8.2.ebuild
@@ -38,11 +38,14 @@ REQUIRED_USE="debug? ( !binary )
!amd64? ( !x86? ( binary ) )"
# The amd64/x86 check is needed to workaround #570892.
+SOURCE_DEPEND="
+ >=sys-power/iasl-20060912
+ ${PYTHON_DEPS}"
DEPEND="
- amd64? ( x86? ( !binary? (
- >=sys-power/iasl-20060912
- ${PYTHON_DEPS}
- ) ) )"
+ !binary? (
+ amd64? ( ${SOURCE_DEPEND} )
+ x86? ( ${SOURCE_DEPEND} )
+ )"
RDEPEND=""
pkg_pretend() {
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2016-03-17 23:47 Patrice Clement
0 siblings, 0 replies; 59+ messages in thread
From: Patrice Clement @ 2016-03-17 23:47 UTC (permalink / raw
To: gentoo-commits
commit: d5167002e22b562283f9c433830870b20a581a75
Author: hkgz <hkgz <AT> localhost <DOT> localdomain>
AuthorDate: Tue Mar 8 19:08:59 2016 +0000
Commit: Patrice Clement <monsieurp <AT> gentoo <DOT> org>
CommitDate: Thu Mar 17 23:33:28 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d5167002
sys-firmware/seabios: add support for python3
Closes: https://github.com/gentoo/gentoo/pull/1020
sys-firmware/seabios/seabios-1.7.5-r1.ebuild | 2 +-
sys-firmware/seabios/seabios-1.7.5.ebuild | 2 +-
sys-firmware/seabios/seabios-1.8.2.ebuild | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/sys-firmware/seabios/seabios-1.7.5-r1.ebuild b/sys-firmware/seabios/seabios-1.7.5-r1.ebuild
index fd185d7..d994b7f 100644
--- a/sys-firmware/seabios/seabios-1.7.5-r1.ebuild
+++ b/sys-firmware/seabios/seabios-1.7.5-r1.ebuild
@@ -4,7 +4,7 @@
EAPI=5
-PYTHON_COMPAT=( python2_7 )
+PYTHON_COMPAT=( python{2_7,3_{3,4,5}} )
inherit eutils toolchain-funcs python-any-r1
diff --git a/sys-firmware/seabios/seabios-1.7.5.ebuild b/sys-firmware/seabios/seabios-1.7.5.ebuild
index 4cca54c..7d9e788 100644
--- a/sys-firmware/seabios/seabios-1.7.5.ebuild
+++ b/sys-firmware/seabios/seabios-1.7.5.ebuild
@@ -4,7 +4,7 @@
EAPI=5
-PYTHON_COMPAT=( python2_7 )
+PYTHON_COMPAT=( python{2_7,3_{3,4,5}} )
inherit eutils toolchain-funcs python-any-r1
diff --git a/sys-firmware/seabios/seabios-1.8.2.ebuild b/sys-firmware/seabios/seabios-1.8.2.ebuild
index bc072f1..c3e624a 100644
--- a/sys-firmware/seabios/seabios-1.8.2.ebuild
+++ b/sys-firmware/seabios/seabios-1.8.2.ebuild
@@ -4,7 +4,7 @@
EAPI="5"
-PYTHON_COMPAT=( python2_7 )
+PYTHON_COMPAT=( python{2_7,3_{3,4,5}} )
inherit eutils toolchain-funcs python-any-r1
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2016-11-11 0:37 Mike Frysinger
0 siblings, 0 replies; 59+ messages in thread
From: Mike Frysinger @ 2016-11-11 0:37 UTC (permalink / raw
To: gentoo-commits
commit: 579501ece34758395f36867852fce9ce2a33bbe7
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Fri Nov 11 00:28:50 2016 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Fri Nov 11 00:28:50 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=579501ec
sys-firmware/seabios: update URIs to https://
sys-firmware/seabios/seabios-1.7.5-r1.ebuild | 6 +++---
sys-firmware/seabios/seabios-1.7.5.ebuild | 6 +++---
sys-firmware/seabios/seabios-1.8.2.ebuild | 6 +++---
3 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/sys-firmware/seabios/seabios-1.7.5-r1.ebuild b/sys-firmware/seabios/seabios-1.7.5-r1.ebuild
index 678a65f..fde5848 100644
--- a/sys-firmware/seabios/seabios-1.7.5-r1.ebuild
+++ b/sys-firmware/seabios/seabios-1.7.5-r1.ebuild
@@ -20,9 +20,9 @@ if [[ ${PV} = *9999* || ! -z "${EGIT_COMMIT}" ]]; then
inherit git-2
else
KEYWORDS="~amd64 ~ppc ~ppc64 ~x86 ~amd64-fbsd ~x86-fbsd"
- SRC_URI="!binary? ( http://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
+ SRC_URI="!binary? ( https://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
binary? (
- http://code.coreboot.org/p/seabios/downloads/get/bios.bin-${PV}.gz
+ https://code.coreboot.org/p/seabios/downloads/get/bios.bin-${PV}.gz
seavgabios? (
mirror://debian/pool/main/s/${PN}/${PN}_${PV}-1_all.deb
)
@@ -31,7 +31,7 @@ else
fi
DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
-HOMEPAGE="http://www.seabios.org"
+HOMEPAGE="https://www.seabios.org/"
LICENSE="LGPL-3 GPL-3"
SLOT="0"
diff --git a/sys-firmware/seabios/seabios-1.7.5.ebuild b/sys-firmware/seabios/seabios-1.7.5.ebuild
index fd953a8..527a769 100644
--- a/sys-firmware/seabios/seabios-1.7.5.ebuild
+++ b/sys-firmware/seabios/seabios-1.7.5.ebuild
@@ -20,13 +20,13 @@ if [[ ${PV} = *9999* || ! -z "${EGIT_COMMIT}" ]]; then
inherit git-2
else
KEYWORDS="amd64 ~ppc ~ppc64 x86 ~amd64-fbsd ~x86-fbsd"
- SRC_URI="!binary? ( http://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
- binary? ( http://code.coreboot.org/p/seabios/downloads/get/bios.bin-${PV}.gz )
+ SRC_URI="!binary? ( https://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
+ binary? ( https://code.coreboot.org/p/seabios/downloads/get/bios.bin-${PV}.gz )
${BACKPORTS:+https://dev.gentoo.org/~cardoe/distfiles/${P}-${BACKPORTS}.tar.xz}"
fi
DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
-HOMEPAGE="http://www.seabios.org"
+HOMEPAGE="https://www.seabios.org/"
LICENSE="LGPL-3 GPL-3"
SLOT="0"
diff --git a/sys-firmware/seabios/seabios-1.8.2.ebuild b/sys-firmware/seabios/seabios-1.8.2.ebuild
index 62dde26..44398a9 100644
--- a/sys-firmware/seabios/seabios-1.8.2.ebuild
+++ b/sys-firmware/seabios/seabios-1.8.2.ebuild
@@ -19,8 +19,8 @@ if [[ ${PV} = *9999* || ! -z "${EGIT_COMMIT}" ]]; then
else
KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc x86 ~amd64-fbsd ~x86-fbsd"
# Upstream hasn't released a new binary. We snipe ours from Fedora for now.
- # http://code.coreboot.org/p/seabios/downloads/get/bios.bin-${PV}.gz
- SRC_URI="!binary? ( http://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
+ # https://code.coreboot.org/p/seabios/downloads/get/bios.bin-${PV}.gz
+ SRC_URI="!binary? ( https://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
binary? (
mirror://gentoo/bios.bin-${PV}.xz
seavgabios? ( mirror://gentoo/seavgabios-${PV}.tar.xz )
@@ -28,7 +28,7 @@ else
fi
DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
-HOMEPAGE="http://www.seabios.org"
+HOMEPAGE="https://www.seabios.org/"
LICENSE="LGPL-3 GPL-3"
SLOT="0"
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2016-12-29 20:09 Mike Frysinger
0 siblings, 0 replies; 59+ messages in thread
From: Mike Frysinger @ 2016-12-29 20:09 UTC (permalink / raw
To: gentoo-commits
commit: e747c2787e38a9257e7444025bfccbd35231de71
Author: Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Thu Dec 29 18:36:26 2016 +0000
Commit: Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Thu Dec 29 20:05:07 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e747c278
sys-firmware/seabios: version bump to 1.10.1 #599084
sys-firmware/seabios/Manifest | 3 +
sys-firmware/seabios/seabios-1.10.1.ebuild | 143 +++++++++++++++++++++++++++++
2 files changed, 146 insertions(+)
diff --git a/sys-firmware/seabios/Manifest b/sys-firmware/seabios/Manifest
index 4f7b1e1..d46b9d6 100644
--- a/sys-firmware/seabios/Manifest
+++ b/sys-firmware/seabios/Manifest
@@ -1,6 +1,9 @@
+DIST bios.bin-1.10.1.xz 63668 SHA256 39d39cfa8166d947439081dedebb8c79a159de9b8b5447afb4876416fcf17d9d SHA512 9e3ba9c7dac3f03f9c57898a993eab34f8f3fecb0ac4718f6d4d6b1a825651a255e48fb7dc29a339249f42668469946f238674cb1f8308cf9b4a3e1e82c346d3 WHIRLPOOL 1208730ef4ee8455fe1e051b3350463d458ccf734c0fdd12d06b91dd0edbb96b2e6ec7bcc5b37902a98465c73bbf327fc3c42b7f1587bae1871d4ab9a70f5e50
DIST bios.bin-1.7.5.gz 78943 SHA256 2e83e68e6cff73ede1c2490dabad74c177d7b67f9d93a5ed5f2ef39e76dea0ea SHA512 153a4cf190843540a9a72fcb0cf34f1f9f6ff2efb4b4f700c515dea467b101a8999421b53c2f21599864e2e803ae455a4ae39c7e8be9491c4383b4bfbe734014 WHIRLPOOL 2383f5f3a91581b0ee0ff19fd429a67b7fe09db05c456b98aee01ab9008a12d265e56f81b4d60224c7be15a86da9d2288f83a1d83f621b2ff00ab3aaccb277a4
DIST bios.bin-1.8.2.xz 67428 SHA256 b4628fdbfc39fd73e7ab0c54dfc26128b6011d34778e381c1b2d2340209be838 SHA512 2b2339c02134bcbd6e71e8d31f9907a160534a047bc91502c215d3d4c79431b962177ac43d826cc5689d71dfc0995bc8a9a5caf1a35929f308b3c2bdad720c15 WHIRLPOOL 050a7880d0da8bb8be1ce3e1262f7e5107a5a426eb31ce9629ef497305e390d348de7ed3c7595248010eb02481a2b4a9e4dca94b3a9c954c18b8a9624f46bbc6
+DIST seabios-1.10.1.tar.gz 588092 SHA256 5063ddbac61ec4e61a12daa83931c37e5629b1c18502f7c00ed4e696c2a1d2cb SHA512 b2f1c2b15853b1cc949f741ae13f32fd133efb0d0917e1cdfb253f9cd0bc9bb0b42c592cdd87bc74ccbb12a4301c102ae723ccdb490ea4716e0c9dca3dd3fead WHIRLPOOL 723d4835288566bbb6a3c3b7df2486c0a7f949590404230667a4e4490317591bcdb99dd9b0933770d8c1416c25f6a8d20b153d7410787e19d8ecbd92a7312af9
DIST seabios-1.7.5.tar.gz 537566 SHA256 858d9eda4ad91efa1c45a5a401d560ef9ca8dd172f03b0a106f06661c252dc51 SHA512 ecf5fb9ac44dde6e4ac00baa6c920dde51b923f23dd74e62c5a02eceaf235e57b885975c5a8bd0927e268115c72bd1143a080fdfd4eff4e168ebeaa30436280e WHIRLPOOL 5e1e99b3bd82a8607c5986fde4592c7437bec4bd78abd5873710f6c431d075436725e8d0d32e9f0dd2921c9d84b8613108b21d31c5309a73e337ead7adf35e90
DIST seabios-1.8.2.tar.gz 538497 SHA256 f59479307fdae840de398b75aacb2333c8eba24a5964d68c77e32ca6c987ee61 SHA512 798d222d5f5725a805cde9e6000b5ce714d0551fd4a3c2642cc6e77b2bdab1a9e239939a358a23bbe0e00112f5ad70696c87d20b90655463c835541fc04e1a00 WHIRLPOOL 9cda0ad502a59dd718c543b759ac3fcf5acb4adee70c3da9bfea95ab188415acf6425827de77f45421ec3be8fd9e0c37fb486e62828217ba3e83f88d942a3f4a
DIST seabios_1.7.5-1_all.deb 112098 SHA256 61bab13a733e8087147ae4798f0053c6d632866e332a1ee3af2265e4f57ced36 SHA512 891a26e084ccac8e9badce5a58eeadfb958af9d5ed087a99998f92153718e8231c14abfae0ed86bde870aa9e2f29fd93d5cc04515695e6f2d7b9fcaaef11bfce WHIRLPOOL d47ad79e7bd701862d059d86c7cb3b730b0303c5170ec52a481df5326cad0cd98ea78fcdb2730623b6b65289d9042f4685991eb515402543083cd8228f849959
DIST seavgabios-1.8.2.tar.xz 20284 SHA256 d28ff071ee56f7bd88cec2482908f469d553cd8b61485a8e89989c26cb5c0e4a SHA512 16d2b54cd98aa22f7af21d8c51a4cf87d9462ec0c99bf703bf7f6c3c4e0be4cbd313b8cf0fb79cdb7b6a7f94441493a4f9669b6d44297e12f03a749befa2d845 WHIRLPOOL 9d61957ec4e3a0c5e4b999495119c6cfb4f2165d98b652b530dbee3ceb19b18a75d07902a5ee15b41b877154bb9ac19163d75c6024a40c4e94e6cf5cdf561e9d
+DIST seavgabios-bin-1.10.1.tar.xz 20408 SHA256 88c310f2f1ddbbca3e00f8895706b3df718046bd729ab719c4e4bd01f502bd6d SHA512 7fe97efaf61c2d1e72c8df27b5108c80f6a51f5a7370de68720b0f71abe05ae5765dd867d127df2fa6182b5d4702a9ef7549e7170fec5071b31a6066db20c219 WHIRLPOOL 484c2f0302bf232e8065ec8cc1566731a962a2f76e01df2b7b21611b3c3ab47b04f1de192a3675130942a42c97f78e210d14ac2e36a7c36d8c28eff4e1618abc
diff --git a/sys-firmware/seabios/seabios-1.10.1.ebuild b/sys-firmware/seabios/seabios-1.10.1.ebuild
new file mode 100644
index 00000000..ef12120
--- /dev/null
+++ b/sys-firmware/seabios/seabios-1.10.1.ebuild
@@ -0,0 +1,143 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="5"
+
+PYTHON_COMPAT=( python{2_7,3_{4,5}} )
+
+inherit eutils toolchain-funcs python-any-r1
+
+# SeaBIOS maintainers sometimes don't release stable tarballs or stable
+# binaries to generate the stable tarball the following is necessary:
+# git clone git://git.seabios.org/seabios.git && cd seabios
+# git archive --output seabios-${PV}.tar.gz --prefix seabios-${PV}/ rel-${PV}
+
+if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
+ EGIT_REPO_URI="git://git.seabios.org/seabios.git"
+ inherit git-2
+else
+ KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+ # Upstream hasn't released a new binary. We snipe ours from Fedora for now.
+ # https://code.coreboot.org/p/seabios/downloads/get/bios.bin-${PV}.gz
+ # http://fedora.mirror.lstn.net/
+ # http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/
+ # seabios-bin-1.10.1-1.fc26.noarch.rpm
+ # seavgabios-bin-1.10.1-1.fc26.noarch.rpm
+ SRC_URI="!binary? ( https://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
+ binary? (
+ mirror://gentoo/bios.bin-${PV}.xz
+ seavgabios? ( mirror://gentoo/seavgabios-bin-${PV}.tar.xz )
+ )"
+fi
+
+DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
+HOMEPAGE="https://www.seabios.org/"
+
+LICENSE="LGPL-3 GPL-3"
+SLOT="0"
+IUSE="+binary debug +seavgabios"
+
+REQUIRED_USE="debug? ( !binary )
+ !amd64? ( !x86? ( binary ) )"
+
+# The amd64/x86 check is needed to workaround #570892.
+SOURCE_DEPEND="
+ >=sys-power/iasl-20060912
+ ${PYTHON_DEPS}"
+DEPEND="
+ !binary? (
+ amd64? ( ${SOURCE_DEPEND} )
+ x86? ( ${SOURCE_DEPEND} )
+ )"
+RDEPEND=""
+
+pkg_pretend() {
+ if ! use binary; then
+ ewarn "You have decided to compile your own SeaBIOS. This is not"
+ ewarn "supported by upstream unless you use their recommended"
+ ewarn "toolchain (which you are not)."
+ elog
+ ewarn "If you are intending to use this build with QEMU, realize"
+ ewarn "you will not receive any support if you have compiled your"
+ ewarn "own SeaBIOS. Virtual machines subtly fail based on changes"
+ ewarn "in SeaBIOS."
+ fi
+}
+
+pkg_setup() {
+ use binary || python-any-r1_pkg_setup
+}
+
+src_unpack() {
+ default
+
+ # This simplifies the logic between binary & source builds.
+ mkdir -p "${S}"
+}
+
+src_prepare() {
+ use binary && return
+
+ epatch "${FILESDIR}"/${P}-fstack-check.patch #559980
+ epatch_user
+}
+
+src_configure() {
+ use binary && return
+
+ tc-ld-disable-gold #438058
+
+ if use debug ; then
+ echo "CONFIG_DEBUG_LEVEL=8" >.config
+ fi
+ _emake config
+}
+
+_emake() {
+ LANG=C \
+ emake V=1 \
+ CC="$(tc-getCC)" \
+ LD="$(tc-getLD)" \
+ AR="$(tc-getAR)" \
+ OBJCOPY="$(tc-getOBJCOPY)" \
+ RANLIB="$(tc-getRANLIB)" \
+ OBJDUMP="$(tc-getOBJDUMP)" \
+ HOST_CC="$(tc-getBUILD_CC)" \
+ VERSION="Gentoo/${EGIT_COMMIT:-${PVR}}" \
+ "$@"
+}
+
+src_compile() {
+ use binary && return
+
+ _emake out/bios.bin
+ mv out/bios.bin ../bios.bin
+
+ if use seavgabios ; then
+ local config t targets=(
+ cirrus
+ isavga
+ qxl
+ stdvga
+ virtio
+ vmware
+ )
+ for t in "${targets[@]}" ; do
+ emake clean distclean
+ cp "${FILESDIR}/seavgabios/config.vga-${t}" .config || die
+ _emake oldnoconfig
+ _emake out/vgabios.bin
+ cp out/vgabios.bin ../vgabios-${t}.bin || die
+ done
+ fi
+}
+
+src_install() {
+ insinto /usr/share/seabios
+ newins ../bios.bin* bios.bin
+
+ if use seavgabios ; then
+ insinto /usr/share/seavgabios
+ doins ../vgabios*.bin
+ fi
+}
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2017-01-02 18:53 Alon Bar-Lev
0 siblings, 0 replies; 59+ messages in thread
From: Alon Bar-Lev @ 2017-01-02 18:53 UTC (permalink / raw
To: gentoo-commits
commit: aef89adf57ac264a719346be0447826643d04fef
Author: Alon Bar-Lev <alonbl <AT> gentoo <DOT> org>
AuthorDate: Mon Jan 2 14:14:49 2017 +0000
Commit: Alon Bar-Lev <alonbl <AT> gentoo <DOT> org>
CommitDate: Mon Jan 2 14:15:42 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=aef89adf
sys-firmware/seabios: remove unneeded patch
Bug: 604158
Package-Manager: portage-2.3.0
sys-firmware/seabios/seabios-1.8.2.ebuild | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/sys-firmware/seabios/seabios-1.8.2.ebuild b/sys-firmware/seabios/seabios-1.8.2.ebuild
index 44398a9..2bb1144 100644
--- a/sys-firmware/seabios/seabios-1.8.2.ebuild
+++ b/sys-firmware/seabios/seabios-1.8.2.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2016 Gentoo Foundation
+# Copyright 1999-2017 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Id$
@@ -75,7 +75,6 @@ src_unpack() {
src_prepare() {
use binary && return
- epatch "${FILESDIR}"/${P}-fstack-check.patch #559980
epatch_user
}
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2017-01-21 17:16 Agostino Sarubbo
0 siblings, 0 replies; 59+ messages in thread
From: Agostino Sarubbo @ 2017-01-21 17:16 UTC (permalink / raw
To: gentoo-commits
commit: e010f88f176339a4f2cadc6c585fbf2e3ddce0d2
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Sat Jan 21 17:15:34 2017 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Sat Jan 21 17:16:18 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e010f88f
sys-firmware/seabios: amd64 stable wrt bug #601824
Package-Manager: portage-2.3.0
RepoMan-Options: --include-arches="amd64"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-firmware/seabios/seabios-1.10.1.ebuild | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-firmware/seabios/seabios-1.10.1.ebuild b/sys-firmware/seabios/seabios-1.10.1.ebuild
index ef12120..5c5cc2a 100644
--- a/sys-firmware/seabios/seabios-1.10.1.ebuild
+++ b/sys-firmware/seabios/seabios-1.10.1.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2016 Gentoo Foundation
+# Copyright 1999-2017 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
EAPI="5"
@@ -16,7 +16,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-2
else
- KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+ KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
# Upstream hasn't released a new binary. We snipe ours from Fedora for now.
# https://code.coreboot.org/p/seabios/downloads/get/bios.bin-${PV}.gz
# http://fedora.mirror.lstn.net/
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2017-01-21 17:27 Agostino Sarubbo
0 siblings, 0 replies; 59+ messages in thread
From: Agostino Sarubbo @ 2017-01-21 17:27 UTC (permalink / raw
To: gentoo-commits
commit: 8bf88d6cb244e25e9a12599916fc5c9d45fe45bd
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Sat Jan 21 17:25:57 2017 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Sat Jan 21 17:27:05 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=8bf88d6c
sys-firmware/seabios: x86 stable wrt bug #601824
Package-Manager: portage-2.3.0
RepoMan-Options: --include-arches="x86"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-firmware/seabios/seabios-1.10.1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.10.1.ebuild b/sys-firmware/seabios/seabios-1.10.1.ebuild
index 5c5cc2a..ded9fd0 100644
--- a/sys-firmware/seabios/seabios-1.10.1.ebuild
+++ b/sys-firmware/seabios/seabios-1.10.1.ebuild
@@ -16,7 +16,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-2
else
- KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+ KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc x86 ~amd64-fbsd ~x86-fbsd"
# Upstream hasn't released a new binary. We snipe ours from Fedora for now.
# https://code.coreboot.org/p/seabios/downloads/get/bios.bin-${PV}.gz
# http://fedora.mirror.lstn.net/
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2017-01-22 19:23 Alon Bar-Lev
0 siblings, 0 replies; 59+ messages in thread
From: Alon Bar-Lev @ 2017-01-22 19:23 UTC (permalink / raw
To: gentoo-commits
commit: eeffec793b050ecfc3ca03adecd0027b2851efab
Author: Alon Bar-Lev <alonbl <AT> gentoo <DOT> org>
AuthorDate: Sun Jan 22 19:23:05 2017 +0000
Commit: Alon Bar-Lev <alonbl <AT> gentoo <DOT> org>
CommitDate: Sun Jan 22 19:23:05 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=eeffec79
sys-firmware/seabios: remove unneeded patch
Bug: 604158
Package-Manager: portage-2.3.0
sys-firmware/seabios/seabios-1.10.1.ebuild | 1 -
sys-firmware/seabios/seabios-1.8.2.ebuild | 1 +
2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.10.1.ebuild b/sys-firmware/seabios/seabios-1.10.1.ebuild
index ded9fd0..c430395 100644
--- a/sys-firmware/seabios/seabios-1.10.1.ebuild
+++ b/sys-firmware/seabios/seabios-1.10.1.ebuild
@@ -78,7 +78,6 @@ src_unpack() {
src_prepare() {
use binary && return
- epatch "${FILESDIR}"/${P}-fstack-check.patch #559980
epatch_user
}
diff --git a/sys-firmware/seabios/seabios-1.8.2.ebuild b/sys-firmware/seabios/seabios-1.8.2.ebuild
index 2bb1144..78b1b17 100644
--- a/sys-firmware/seabios/seabios-1.8.2.ebuild
+++ b/sys-firmware/seabios/seabios-1.8.2.ebuild
@@ -75,6 +75,7 @@ src_unpack() {
src_prepare() {
use binary && return
+ epatch "${FILESDIR}"/${P}-fstack-check.patch #559980
epatch_user
}
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2017-09-01 1:09 Matthias Maier
0 siblings, 0 replies; 59+ messages in thread
From: Matthias Maier @ 2017-09-01 1:09 UTC (permalink / raw
To: gentoo-commits
commit: 076cda37021c624dff310d7b26ada9a47e51fe3e
Author: Matthias Maier <tamiko <AT> gentoo <DOT> org>
AuthorDate: Fri Sep 1 01:06:08 2017 +0000
Commit: Matthias Maier <tamiko <AT> gentoo <DOT> org>
CommitDate: Fri Sep 1 01:06:08 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=076cda37
sys-firmware/seabios: stabilize on amd64, x86, bug #625614
Package-Manager: Portage-2.3.6, Repoman-2.3.3
sys-firmware/seabios/seabios-1.10.2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.10.2.ebuild b/sys-firmware/seabios/seabios-1.10.2.ebuild
index ad50dcd7ec5..d1513a29956 100644
--- a/sys-firmware/seabios/seabios-1.10.2.ebuild
+++ b/sys-firmware/seabios/seabios-1.10.2.ebuild
@@ -16,7 +16,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+ KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc x86 ~amd64-fbsd ~x86-fbsd"
# Binary versions taken from fedora:
# http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2017-12-10 10:17 Pacho Ramos
0 siblings, 0 replies; 59+ messages in thread
From: Pacho Ramos @ 2017-12-10 10:17 UTC (permalink / raw
To: gentoo-commits
commit: ef5de12fa6b60578e3fa90f75ce79f93434c68ca
Author: Pacho Ramos <pacho <AT> gentoo <DOT> org>
AuthorDate: Sat Dec 9 20:35:42 2017 +0000
Commit: Pacho Ramos <pacho <AT> gentoo <DOT> org>
CommitDate: Sun Dec 10 10:15:10 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ef5de12f
sys-firmware/seabios: Add support for newer python
Package-Manager: Portage-2.3.16, Repoman-2.3.6
sys-firmware/seabios/seabios-1.10.2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.10.2.ebuild b/sys-firmware/seabios/seabios-1.10.2.ebuild
index d1513a29956..d06e51b40a0 100644
--- a/sys-firmware/seabios/seabios-1.10.2.ebuild
+++ b/sys-firmware/seabios/seabios-1.10.2.ebuild
@@ -3,7 +3,7 @@
EAPI="6"
-PYTHON_COMPAT=( python{2_7,3_{4,5}} )
+PYTHON_COMPAT=( python{2_7,3_{4,5,6}} )
inherit eutils toolchain-funcs python-any-r1
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2018-02-11 21:30 Matthias Maier
0 siblings, 0 replies; 59+ messages in thread
From: Matthias Maier @ 2018-02-11 21:30 UTC (permalink / raw
To: gentoo-commits
commit: 24e0876ca53199dcde6ee2e8384e9f9c6319edff
Author: Matthias Maier <tamiko <AT> gentoo <DOT> org>
AuthorDate: Sun Feb 11 21:15:07 2018 +0000
Commit: Matthias Maier <tamiko <AT> gentoo <DOT> org>
CommitDate: Sun Feb 11 21:30:27 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=24e0876c
sys-firmware/seabios: version bump to 1.11.0
Bug: https://bugs.gentoo.org/617232
Package-Manager: Portage-2.3.24, Repoman-2.3.6
sys-firmware/seabios/Manifest | 2 +
sys-firmware/seabios/seabios-1.11.0.ebuild | 137 +++++++++++++++++++++++++++++
2 files changed, 139 insertions(+)
diff --git a/sys-firmware/seabios/Manifest b/sys-firmware/seabios/Manifest
index c849ca26740..2b99e80927e 100644
--- a/sys-firmware/seabios/Manifest
+++ b/sys-firmware/seabios/Manifest
@@ -2,4 +2,6 @@ DIST bios.bin-1.10.1.xz 63668 BLAKE2B 82b055acc851305a2f9d54419da846a3ed1924038c
DIST seabios-1.10.1.tar.gz 588092 BLAKE2B d27d16e5d02e00695dd8790ef63bc5d99815580d6d6d5bcbbb70b36a9cc7984cca6d1c4c274a20a992e11460b52583ec9e77f8e2b22066349f2915cbf6fb9e2f SHA512 b2f1c2b15853b1cc949f741ae13f32fd133efb0d0917e1cdfb253f9cd0bc9bb0b42c592cdd87bc74ccbb12a4301c102ae723ccdb490ea4716e0c9dca3dd3fead
DIST seabios-1.10.2-bin.tar.xz 121172 BLAKE2B 9d4ff624b638773e59bbf6674fb8630bd815d75af1a81db4de7f9740c37485330e6d054448f2301a97455ff0d3190d988ce0348eac78bd978982b6ce5146e4f6 SHA512 a46ce389b8b0fe7182a3dc2954fab7e0ef27ac65823e3785c247ccf77c37eaa746d94f74a4a29a221aa16ab508cf07ec8d399aa612d5c0184b48bce24c663b69
DIST seabios-1.10.2.tar.gz 589283 BLAKE2B 08fdbecf7fb06629db472adb05a780249dbf0e0a44d04dcced5480d631c133f74ecd04b04486db3bb817b8e119e783c4b09c3ade15b9a6cc956537e9f7204514 SHA512 ea8396fe247a3bd16b43ab775cf8e23f139673b94e83f450cadb094cc8117ca7e9ef518162d965209d5ab091c96f70ec5cc8ec8d15b638e06c4c8f7a0e1609dc
+DIST seabios-1.11.0-bin.tar.xz 158552 BLAKE2B 44c42b9eea70a090ad51296949fe79e5360b569bae791fe84f447061f8dbcdb6b601501e2cc1607b62308f3118087386d15ba32c8495202f62f9f9a1e3cf27c3 SHA512 03a1523dc99dbf6e353e7844a4f12020d88bf8d5cbfd187007663ab1b02447b02694f27ee93aa46a18a5ab161f13b1ffe62f2d0f678cd86975a3d53295a6eb1e
+DIST seabios-1.11.0.tar.gz 607746 BLAKE2B 9f688be6b8f7c0fcbd72b59ac649a9c763fdd9e2971a4d85636c9972efc0ad42082a1622a8c41156ad1e2063907349c2e02cff9aeb444844dc445b5f7d6062bb SHA512 cae79c720bfbba3321777bbc6d5bde432fe56e2ba8f1be8acfebbde0bd453a58e889f5fa24db6055dca0a3a56d35b907761723ea35ef248c5f812129d0a27b77
DIST seavgabios-bin-1.10.1.tar.xz 20408 BLAKE2B e8678a5e1b7cf5c36017c3f3dec1996103304394215ce52e9fc23bb0581d253a87be0592eb5b2f1ef7bbfb03e80cd937d82b04a46c76e41fa5b95063782075b2 SHA512 7fe97efaf61c2d1e72c8df27b5108c80f6a51f5a7370de68720b0f71abe05ae5765dd867d127df2fa6182b5d4702a9ef7549e7170fec5071b31a6066db20c219
diff --git a/sys-firmware/seabios/seabios-1.11.0.ebuild b/sys-firmware/seabios/seabios-1.11.0.ebuild
new file mode 100644
index 00000000000..699fca3bfa7
--- /dev/null
+++ b/sys-firmware/seabios/seabios-1.11.0.ebuild
@@ -0,0 +1,137 @@
+# Copyright 1999-2018 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="6"
+
+PYTHON_COMPAT=( python{2_7,3_{4,5,6}} )
+
+inherit eutils toolchain-funcs python-any-r1
+
+# SeaBIOS maintainers sometimes don't release stable tarballs or stable
+# binaries to generate the stable tarball the following is necessary:
+# git clone git://git.seabios.org/seabios.git && cd seabios
+# git archive --output seabios-${PV}.tar.gz --prefix seabios-${PV}/ rel-${PV}
+
+if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
+ EGIT_REPO_URI="git://git.seabios.org/seabios.git"
+ inherit git-r3
+else
+ KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+
+ # Binary versions taken from fedora:
+ # http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/
+ # seabios-bin-1.10.2-1.fc27.noarch.rpm
+ # seavgabios-bin-1.10.2-1.fc27.noarch.rpm
+ SRC_URI="
+ !binary? ( https://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
+ binary? ( https://dev.gentoo.org/~tamiko/distfiles/${P}-bin.tar.xz )"
+fi
+
+DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
+HOMEPAGE="https://www.seabios.org/"
+
+LICENSE="LGPL-3 GPL-3"
+SLOT="0"
+IUSE="+binary debug +seavgabios"
+
+REQUIRED_USE="debug? ( !binary )
+ !amd64? ( !x86? ( binary ) )"
+
+# The amd64/x86 check is needed to workaround #570892.
+SOURCE_DEPEND="
+ >=sys-power/iasl-20060912
+ ${PYTHON_DEPS}"
+DEPEND="
+ !binary? (
+ amd64? ( ${SOURCE_DEPEND} )
+ x86? ( ${SOURCE_DEPEND} )
+ )"
+RDEPEND=""
+
+pkg_pretend() {
+ if ! use binary; then
+ ewarn "You have decided to compile your own SeaBIOS. This is not"
+ ewarn "supported by upstream unless you use their recommended"
+ ewarn "toolchain (which you are not)."
+ elog
+ ewarn "If you are intending to use this build with QEMU, realize"
+ ewarn "you will not receive any support if you have compiled your"
+ ewarn "own SeaBIOS. Virtual machines subtly fail based on changes"
+ ewarn "in SeaBIOS."
+ fi
+}
+
+pkg_setup() {
+ use binary || python-any-r1_pkg_setup
+}
+
+src_unpack() {
+ default
+
+ # This simplifies the logic between binary & source builds.
+ mkdir -p "${S}"
+}
+
+src_configure() {
+ use binary && return
+
+ tc-ld-disable-gold #438058
+
+ if use debug ; then
+ echo "CONFIG_DEBUG_LEVEL=8" >.config
+ fi
+ _emake config
+}
+
+_emake() {
+ LANG=C \
+ emake V=1 \
+ CC="$(tc-getCC)" \
+ LD="$(tc-getLD)" \
+ AR="$(tc-getAR)" \
+ OBJCOPY="$(tc-getOBJCOPY)" \
+ RANLIB="$(tc-getRANLIB)" \
+ OBJDUMP="$(tc-getOBJDUMP)" \
+ HOST_CC="$(tc-getBUILD_CC)" \
+ VERSION="Gentoo/${EGIT_COMMIT:-${PVR}}" \
+ "$@"
+}
+
+src_compile() {
+ use binary && return
+
+ cp "${FILESDIR}/seabios/config.seabios-256k" .config || die
+ _emake oldnoconfig
+ _emake out/bios.bin
+ mv out/bios.bin ../bios-256k.bin || die
+
+ if use seavgabios ; then
+ local config t targets=(
+ cirrus
+ isavga
+ qxl
+ stdvga
+ virtio
+ vmware
+ )
+ for t in "${targets[@]}" ; do
+ emake clean distclean
+ cp "${FILESDIR}/seavgabios/config.vga-${t}" .config || die
+ _emake oldnoconfig
+ _emake out/vgabios.bin
+ cp out/vgabios.bin ../vgabios-${t}.bin || die
+ done
+ fi
+}
+
+src_install() {
+
+ insinto /usr/share/seabios
+ use binary && doins ../bios.bin
+ doins ../bios-256k.bin
+
+ if use seavgabios ; then
+ insinto /usr/share/seavgabios
+ doins ../vgabios*.bin
+ fi
+}
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2018-02-11 21:30 Matthias Maier
0 siblings, 0 replies; 59+ messages in thread
From: Matthias Maier @ 2018-02-11 21:30 UTC (permalink / raw
To: gentoo-commits
commit: 451e818f231d07b3082a75ab61908d74a3bac7f3
Author: Matthias Maier <tamiko <AT> gentoo <DOT> org>
AuthorDate: Sun Feb 11 21:16:07 2018 +0000
Commit: Matthias Maier <tamiko <AT> gentoo <DOT> org>
CommitDate: Sun Feb 11 21:30:27 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=451e818f
sys-firmware/seabios: drop 1.10.1
Package-Manager: Portage-2.3.24, Repoman-2.3.6
sys-firmware/seabios/Manifest | 3 -
sys-firmware/seabios/seabios-1.10.1.ebuild | 142 -----------------------------
2 files changed, 145 deletions(-)
diff --git a/sys-firmware/seabios/Manifest b/sys-firmware/seabios/Manifest
index 2b99e80927e..a153d6fbfff 100644
--- a/sys-firmware/seabios/Manifest
+++ b/sys-firmware/seabios/Manifest
@@ -1,7 +1,4 @@
-DIST bios.bin-1.10.1.xz 63668 BLAKE2B 82b055acc851305a2f9d54419da846a3ed1924038cdf1c97665c3953ddb9a404a373478a8f655a1ccc5b978a638c48604b2d77a2aa8989c177ece402be971d27 SHA512 9e3ba9c7dac3f03f9c57898a993eab34f8f3fecb0ac4718f6d4d6b1a825651a255e48fb7dc29a339249f42668469946f238674cb1f8308cf9b4a3e1e82c346d3
-DIST seabios-1.10.1.tar.gz 588092 BLAKE2B d27d16e5d02e00695dd8790ef63bc5d99815580d6d6d5bcbbb70b36a9cc7984cca6d1c4c274a20a992e11460b52583ec9e77f8e2b22066349f2915cbf6fb9e2f SHA512 b2f1c2b15853b1cc949f741ae13f32fd133efb0d0917e1cdfb253f9cd0bc9bb0b42c592cdd87bc74ccbb12a4301c102ae723ccdb490ea4716e0c9dca3dd3fead
DIST seabios-1.10.2-bin.tar.xz 121172 BLAKE2B 9d4ff624b638773e59bbf6674fb8630bd815d75af1a81db4de7f9740c37485330e6d054448f2301a97455ff0d3190d988ce0348eac78bd978982b6ce5146e4f6 SHA512 a46ce389b8b0fe7182a3dc2954fab7e0ef27ac65823e3785c247ccf77c37eaa746d94f74a4a29a221aa16ab508cf07ec8d399aa612d5c0184b48bce24c663b69
DIST seabios-1.10.2.tar.gz 589283 BLAKE2B 08fdbecf7fb06629db472adb05a780249dbf0e0a44d04dcced5480d631c133f74ecd04b04486db3bb817b8e119e783c4b09c3ade15b9a6cc956537e9f7204514 SHA512 ea8396fe247a3bd16b43ab775cf8e23f139673b94e83f450cadb094cc8117ca7e9ef518162d965209d5ab091c96f70ec5cc8ec8d15b638e06c4c8f7a0e1609dc
DIST seabios-1.11.0-bin.tar.xz 158552 BLAKE2B 44c42b9eea70a090ad51296949fe79e5360b569bae791fe84f447061f8dbcdb6b601501e2cc1607b62308f3118087386d15ba32c8495202f62f9f9a1e3cf27c3 SHA512 03a1523dc99dbf6e353e7844a4f12020d88bf8d5cbfd187007663ab1b02447b02694f27ee93aa46a18a5ab161f13b1ffe62f2d0f678cd86975a3d53295a6eb1e
DIST seabios-1.11.0.tar.gz 607746 BLAKE2B 9f688be6b8f7c0fcbd72b59ac649a9c763fdd9e2971a4d85636c9972efc0ad42082a1622a8c41156ad1e2063907349c2e02cff9aeb444844dc445b5f7d6062bb SHA512 cae79c720bfbba3321777bbc6d5bde432fe56e2ba8f1be8acfebbde0bd453a58e889f5fa24db6055dca0a3a56d35b907761723ea35ef248c5f812129d0a27b77
-DIST seavgabios-bin-1.10.1.tar.xz 20408 BLAKE2B e8678a5e1b7cf5c36017c3f3dec1996103304394215ce52e9fc23bb0581d253a87be0592eb5b2f1ef7bbfb03e80cd937d82b04a46c76e41fa5b95063782075b2 SHA512 7fe97efaf61c2d1e72c8df27b5108c80f6a51f5a7370de68720b0f71abe05ae5765dd867d127df2fa6182b5d4702a9ef7549e7170fec5071b31a6066db20c219
diff --git a/sys-firmware/seabios/seabios-1.10.1.ebuild b/sys-firmware/seabios/seabios-1.10.1.ebuild
deleted file mode 100644
index c430395a16f..00000000000
--- a/sys-firmware/seabios/seabios-1.10.1.ebuild
+++ /dev/null
@@ -1,142 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="5"
-
-PYTHON_COMPAT=( python{2_7,3_{4,5}} )
-
-inherit eutils toolchain-funcs python-any-r1
-
-# SeaBIOS maintainers sometimes don't release stable tarballs or stable
-# binaries to generate the stable tarball the following is necessary:
-# git clone git://git.seabios.org/seabios.git && cd seabios
-# git archive --output seabios-${PV}.tar.gz --prefix seabios-${PV}/ rel-${PV}
-
-if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
- EGIT_REPO_URI="git://git.seabios.org/seabios.git"
- inherit git-2
-else
- KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc x86 ~amd64-fbsd ~x86-fbsd"
- # Upstream hasn't released a new binary. We snipe ours from Fedora for now.
- # https://code.coreboot.org/p/seabios/downloads/get/bios.bin-${PV}.gz
- # http://fedora.mirror.lstn.net/
- # http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/
- # seabios-bin-1.10.1-1.fc26.noarch.rpm
- # seavgabios-bin-1.10.1-1.fc26.noarch.rpm
- SRC_URI="!binary? ( https://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
- binary? (
- mirror://gentoo/bios.bin-${PV}.xz
- seavgabios? ( mirror://gentoo/seavgabios-bin-${PV}.tar.xz )
- )"
-fi
-
-DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
-HOMEPAGE="https://www.seabios.org/"
-
-LICENSE="LGPL-3 GPL-3"
-SLOT="0"
-IUSE="+binary debug +seavgabios"
-
-REQUIRED_USE="debug? ( !binary )
- !amd64? ( !x86? ( binary ) )"
-
-# The amd64/x86 check is needed to workaround #570892.
-SOURCE_DEPEND="
- >=sys-power/iasl-20060912
- ${PYTHON_DEPS}"
-DEPEND="
- !binary? (
- amd64? ( ${SOURCE_DEPEND} )
- x86? ( ${SOURCE_DEPEND} )
- )"
-RDEPEND=""
-
-pkg_pretend() {
- if ! use binary; then
- ewarn "You have decided to compile your own SeaBIOS. This is not"
- ewarn "supported by upstream unless you use their recommended"
- ewarn "toolchain (which you are not)."
- elog
- ewarn "If you are intending to use this build with QEMU, realize"
- ewarn "you will not receive any support if you have compiled your"
- ewarn "own SeaBIOS. Virtual machines subtly fail based on changes"
- ewarn "in SeaBIOS."
- fi
-}
-
-pkg_setup() {
- use binary || python-any-r1_pkg_setup
-}
-
-src_unpack() {
- default
-
- # This simplifies the logic between binary & source builds.
- mkdir -p "${S}"
-}
-
-src_prepare() {
- use binary && return
-
- epatch_user
-}
-
-src_configure() {
- use binary && return
-
- tc-ld-disable-gold #438058
-
- if use debug ; then
- echo "CONFIG_DEBUG_LEVEL=8" >.config
- fi
- _emake config
-}
-
-_emake() {
- LANG=C \
- emake V=1 \
- CC="$(tc-getCC)" \
- LD="$(tc-getLD)" \
- AR="$(tc-getAR)" \
- OBJCOPY="$(tc-getOBJCOPY)" \
- RANLIB="$(tc-getRANLIB)" \
- OBJDUMP="$(tc-getOBJDUMP)" \
- HOST_CC="$(tc-getBUILD_CC)" \
- VERSION="Gentoo/${EGIT_COMMIT:-${PVR}}" \
- "$@"
-}
-
-src_compile() {
- use binary && return
-
- _emake out/bios.bin
- mv out/bios.bin ../bios.bin
-
- if use seavgabios ; then
- local config t targets=(
- cirrus
- isavga
- qxl
- stdvga
- virtio
- vmware
- )
- for t in "${targets[@]}" ; do
- emake clean distclean
- cp "${FILESDIR}/seavgabios/config.vga-${t}" .config || die
- _emake oldnoconfig
- _emake out/vgabios.bin
- cp out/vgabios.bin ../vgabios-${t}.bin || die
- done
- fi
-}
-
-src_install() {
- insinto /usr/share/seabios
- newins ../bios.bin* bios.bin
-
- if use seavgabios ; then
- insinto /usr/share/seavgabios
- doins ../vgabios*.bin
- fi
-}
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2018-06-10 3:41 Matthias Maier
0 siblings, 0 replies; 59+ messages in thread
From: Matthias Maier @ 2018-06-10 3:41 UTC (permalink / raw
To: gentoo-commits
commit: 8757c9528f2fea62493e9331ee47dd954445e6ff
Author: Matthias Maier <tamiko <AT> gentoo <DOT> org>
AuthorDate: Sun Jun 10 03:38:46 2018 +0000
Commit: Matthias Maier <tamiko <AT> gentoo <DOT> org>
CommitDate: Sun Jun 10 03:38:46 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=8757c952
sys-firmware/seabios: change maintainer
Package-Manager: Portage-2.3.40, Repoman-2.3.9
sys-firmware/seabios/metadata.xml | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sys-firmware/seabios/metadata.xml b/sys-firmware/seabios/metadata.xml
index 584d4b56056..0d64e0a0db2 100644
--- a/sys-firmware/seabios/metadata.xml
+++ b/sys-firmware/seabios/metadata.xml
@@ -5,9 +5,9 @@
<email>cardoe@gentoo.org</email>
<name>Doug Goldstein</name>
</maintainer>
- <maintainer type="project">
- <email>qemu@gentoo.org</email>
- <name>Gentoo QEMU Project</name>
+ <maintainer type="person">
+ <email>tamiko@gentoo.org</email>
+ <name>Matthias Maier</name>
</maintainer>
<maintainer type="project">
<email>virtualization@gentoo.org</email>
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2018-06-17 23:29 Thomas Deutschmann
0 siblings, 0 replies; 59+ messages in thread
From: Thomas Deutschmann @ 2018-06-17 23:29 UTC (permalink / raw
To: gentoo-commits
commit: c740e42d19a8216884830ddcdf6bb4732edd8e43
Author: Thomas Deutschmann <whissi <AT> gentoo <DOT> org>
AuthorDate: Sun Jun 17 23:24:07 2018 +0000
Commit: Thomas Deutschmann <whissi <AT> gentoo <DOT> org>
CommitDate: Sun Jun 17 23:28:54 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c740e42d
sys-firmware/seabios: x86 stable (bug #658180)
Package-Manager: Portage-2.3.40, Repoman-2.3.9
sys-firmware/seabios/seabios-1.11.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.11.0.ebuild b/sys-firmware/seabios/seabios-1.11.0.ebuild
index 699fca3bfa7..72456e2e53a 100644
--- a/sys-firmware/seabios/seabios-1.11.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.11.0.ebuild
@@ -16,7 +16,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+ KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc x86 ~amd64-fbsd ~x86-fbsd"
# Binary versions taken from fedora:
# http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2018-06-23 13:48 Mikle Kolyada
0 siblings, 0 replies; 59+ messages in thread
From: Mikle Kolyada @ 2018-06-23 13:48 UTC (permalink / raw
To: gentoo-commits
commit: 7f5f6b21ca2d201490cbb710726aa5aeb9cd5708
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sat Jun 23 13:46:11 2018 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sat Jun 23 13:48:26 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=7f5f6b21
sys-firmware/seabios: amd64 stable wrt bug #658180
Package-Manager: Portage-2.3.40, Repoman-2.3.9
sys-firmware/seabios/seabios-1.11.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.11.0.ebuild b/sys-firmware/seabios/seabios-1.11.0.ebuild
index 72456e2e53a..c3a08537132 100644
--- a/sys-firmware/seabios/seabios-1.11.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.11.0.ebuild
@@ -16,7 +16,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc x86 ~amd64-fbsd ~x86-fbsd"
+ KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc x86 ~amd64-fbsd ~x86-fbsd"
# Binary versions taken from fedora:
# http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2018-11-11 21:14 Matthias Maier
0 siblings, 0 replies; 59+ messages in thread
From: Matthias Maier @ 2018-11-11 21:14 UTC (permalink / raw
To: gentoo-commits
commit: 76f01453cc239c92f2ed624c02302a109f371e00
Author: Luke Dashjr <luke-jr+git <AT> utopios <DOT> org>
AuthorDate: Wed Jun 27 08:57:05 2018 +0000
Commit: Matthias Maier <tamiko <AT> gentoo <DOT> org>
CommitDate: Sun Nov 11 21:12:45 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=76f01453
sys-firmware/seabios: Actually use iasl to rebuild hex files
Fixed build to actually use sys-power/iasl (rather than using bundled
pre-compiled hex files). Generated hex files do not match, so to be sure,
I revbumped the ebuild version.
Closes: https://github.com/gentoo/gentoo/pull/9182
Signed-off-by: Luke Dashjr <luke-jr+git <AT> utopios.org>
Signed-off-by: Matthias Maier <tamiko <AT> gentoo.org>
sys-firmware/seabios/seabios-1.11.0-r1.ebuild | 145 ++++++++++++++++++++++++++
1 file changed, 145 insertions(+)
diff --git a/sys-firmware/seabios/seabios-1.11.0-r1.ebuild b/sys-firmware/seabios/seabios-1.11.0-r1.ebuild
new file mode 100644
index 00000000000..ea838ed955e
--- /dev/null
+++ b/sys-firmware/seabios/seabios-1.11.0-r1.ebuild
@@ -0,0 +1,145 @@
+# Copyright 1999-2018 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="6"
+
+PYTHON_COMPAT=( python{2_7,3_{4,5,6}} )
+
+inherit eutils toolchain-funcs python-any-r1
+
+# SeaBIOS maintainers sometimes don't release stable tarballs or stable
+# binaries to generate the stable tarball the following is necessary:
+# git clone git://git.seabios.org/seabios.git && cd seabios
+# git archive --output seabios-${PV}.tar.gz --prefix seabios-${PV}/ rel-${PV}
+
+if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
+ EGIT_REPO_URI="git://git.seabios.org/seabios.git"
+ inherit git-r3
+else
+ KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+
+ # Binary versions taken from fedora:
+ # http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/
+ # seabios-bin-1.10.2-1.fc27.noarch.rpm
+ # seavgabios-bin-1.10.2-1.fc27.noarch.rpm
+ SRC_URI="
+ !binary? ( https://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
+ binary? ( https://dev.gentoo.org/~tamiko/distfiles/${P}-bin.tar.xz )"
+fi
+
+DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
+HOMEPAGE="https://www.seabios.org/"
+
+LICENSE="LGPL-3 GPL-3"
+SLOT="0"
+IUSE="+binary debug +seavgabios"
+
+REQUIRED_USE="debug? ( !binary )
+ !amd64? ( !x86? ( binary ) )"
+
+# The amd64/x86 check is needed to workaround #570892.
+SOURCE_DEPEND="
+ >=sys-power/iasl-20060912
+ ${PYTHON_DEPS}"
+DEPEND="
+ !binary? (
+ amd64? ( ${SOURCE_DEPEND} )
+ x86? ( ${SOURCE_DEPEND} )
+ )"
+RDEPEND=""
+
+pkg_pretend() {
+ if ! use binary; then
+ ewarn "You have decided to compile your own SeaBIOS. This is not"
+ ewarn "supported by upstream unless you use their recommended"
+ ewarn "toolchain (which you are not)."
+ elog
+ ewarn "If you are intending to use this build with QEMU, realize"
+ ewarn "you will not receive any support if you have compiled your"
+ ewarn "own SeaBIOS. Virtual machines subtly fail based on changes"
+ ewarn "in SeaBIOS."
+ fi
+}
+
+pkg_setup() {
+ use binary || python-any-r1_pkg_setup
+}
+
+src_unpack() {
+ default
+
+ # This simplifies the logic between binary & source builds.
+ mkdir -p "${S}"
+}
+
+src_prepare() {
+ default
+
+ # Ensure precompiled iasl files are never used
+ find "${WORKDIR}" -name '*.hex' -delete || die
+}
+
+src_configure() {
+ use binary && return
+
+ tc-ld-disable-gold #438058
+
+ if use debug ; then
+ echo "CONFIG_DEBUG_LEVEL=8" >.config
+ fi
+ _emake config
+}
+
+_emake() {
+ LANG=C \
+ emake V=1 \
+ CC="$(tc-getCC)" \
+ LD="$(tc-getLD)" \
+ AR="$(tc-getAR)" \
+ AS="$(tc-getAS)" \
+ OBJCOPY="$(tc-getOBJCOPY)" \
+ RANLIB="$(tc-getRANLIB)" \
+ OBJDUMP="$(tc-getOBJDUMP)" \
+ HOST_CC="$(tc-getBUILD_CC)" \
+ VERSION="Gentoo/${EGIT_COMMIT:-${PVR}}" \
+ "$@"
+}
+
+src_compile() {
+ use binary && return
+
+ cp "${FILESDIR}/seabios/config.seabios-256k" .config || die
+ _emake oldnoconfig
+ _emake iasl
+ _emake out/bios.bin
+ mv out/bios.bin ../bios-256k.bin || die
+
+ if use seavgabios ; then
+ local config t targets=(
+ cirrus
+ isavga
+ qxl
+ stdvga
+ virtio
+ vmware
+ )
+ for t in "${targets[@]}" ; do
+ emake clean distclean
+ cp "${FILESDIR}/seavgabios/config.vga-${t}" .config || die
+ _emake oldnoconfig
+ _emake out/vgabios.bin
+ cp out/vgabios.bin ../vgabios-${t}.bin || die
+ done
+ fi
+}
+
+src_install() {
+ insinto /usr/share/seabios
+ use binary && doins ../bios.bin
+ doins ../bios-256k.bin
+
+ if use seavgabios ; then
+ insinto /usr/share/seavgabios
+ doins ../vgabios*.bin
+ fi
+}
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2019-07-28 20:20 Matthias Maier
0 siblings, 0 replies; 59+ messages in thread
From: Matthias Maier @ 2019-07-28 20:20 UTC (permalink / raw
To: gentoo-commits
commit: 322983b68e2e3c455151aa2888d135fa0bc65bba
Author: Matthias Maier <tamiko <AT> gentoo <DOT> org>
AuthorDate: Sun Jul 28 19:45:42 2019 +0000
Commit: Matthias Maier <tamiko <AT> gentoo <DOT> org>
CommitDate: Sun Jul 28 20:19:32 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=322983b6
sys-firmware/seabios: version bump to 1.12.0
* Version bump to 1.12.0
* Actually use Redhat's "1.12.1" version for USE=binary
Closes: https://bugs.gentoo.org/675754
Package-Manager: Portage-2.3.69, Repoman-2.3.16
Signed-off-by: Matthias Maier <tamiko <AT> gentoo.org>
sys-firmware/seabios/Manifest | 2 +
sys-firmware/seabios/seabios-1.12.0.ebuild | 145 +++++++++++++++++++++++++++++
2 files changed, 147 insertions(+)
diff --git a/sys-firmware/seabios/Manifest b/sys-firmware/seabios/Manifest
index a153d6fbfff..8c598e824f6 100644
--- a/sys-firmware/seabios/Manifest
+++ b/sys-firmware/seabios/Manifest
@@ -2,3 +2,5 @@ DIST seabios-1.10.2-bin.tar.xz 121172 BLAKE2B 9d4ff624b638773e59bbf6674fb8630bd8
DIST seabios-1.10.2.tar.gz 589283 BLAKE2B 08fdbecf7fb06629db472adb05a780249dbf0e0a44d04dcced5480d631c133f74ecd04b04486db3bb817b8e119e783c4b09c3ade15b9a6cc956537e9f7204514 SHA512 ea8396fe247a3bd16b43ab775cf8e23f139673b94e83f450cadb094cc8117ca7e9ef518162d965209d5ab091c96f70ec5cc8ec8d15b638e06c4c8f7a0e1609dc
DIST seabios-1.11.0-bin.tar.xz 158552 BLAKE2B 44c42b9eea70a090ad51296949fe79e5360b569bae791fe84f447061f8dbcdb6b601501e2cc1607b62308f3118087386d15ba32c8495202f62f9f9a1e3cf27c3 SHA512 03a1523dc99dbf6e353e7844a4f12020d88bf8d5cbfd187007663ab1b02447b02694f27ee93aa46a18a5ab161f13b1ffe62f2d0f678cd86975a3d53295a6eb1e
DIST seabios-1.11.0.tar.gz 607746 BLAKE2B 9f688be6b8f7c0fcbd72b59ac649a9c763fdd9e2971a4d85636c9972efc0ad42082a1622a8c41156ad1e2063907349c2e02cff9aeb444844dc445b5f7d6062bb SHA512 cae79c720bfbba3321777bbc6d5bde432fe56e2ba8f1be8acfebbde0bd453a58e889f5fa24db6055dca0a3a56d35b907761723ea35ef248c5f812129d0a27b77
+DIST seabios-1.12.0-bin.tar.xz 162492 BLAKE2B 9a5a349226ed7efbed328493dc057e232203b251677a23f1f09c133743ff0ca6b05270c9d27460be1d8897888fe23ff7bdfa122023fa8ddb23af03d5b9b6f8dd SHA512 f7a0395d621245093bb9a278d95ecc3d4e8d23f620058cd4fddaf885c8b86256f6258f3fd8173c1d24c03306f44d180e768bf8005ee123bc4b699b9f0ca371be
+DIST seabios-1.12.0.tar.gz 613542 BLAKE2B f145c2db716996bfa9e5c014086ccfaa8ae96ebc158f34303b122b7bf209408c567665d8691364df8d8e886f63e0e72a3f3cd319dfa86ef581023201b5d94e53 SHA512 e52c5363e5bb37b5286e55545aa06bd126218f9d0e3a06ac2e189de68fe3de3256c11ca1bb13357a9c384d7e3af6284083ff3aa587688b5de04ef11b97bdfa27
diff --git a/sys-firmware/seabios/seabios-1.12.0.ebuild b/sys-firmware/seabios/seabios-1.12.0.ebuild
new file mode 100644
index 00000000000..1ab0b09fd5c
--- /dev/null
+++ b/sys-firmware/seabios/seabios-1.12.0.ebuild
@@ -0,0 +1,145 @@
+# Copyright 1999-2019 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="7"
+
+PYTHON_COMPAT=( python{2_7,3_{5,6}} )
+
+inherit eutils toolchain-funcs python-any-r1
+
+# SeaBIOS maintainers sometimes don't release stable tarballs or stable
+# binaries to generate the stable tarball the following is necessary:
+# git clone git://git.seabios.org/seabios.git && cd seabios
+# git archive --output seabios-${PV}.tar.gz --prefix seabios-${PV}/ rel-${PV}
+
+if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
+ EGIT_REPO_URI="git://git.seabios.org/seabios.git"
+ inherit git-r3
+else
+ KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+
+ # Binary versions taken from fedora:
+ # http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/
+ # seabios-bin-1.12.1-2.fc31.noarch.rpm
+ # seavgabios-bin-1.12.1-2.fc31.noarch.rpm
+ SRC_URI="
+ !binary? ( https://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
+ binary? ( https://dev.gentoo.org/~tamiko/distfiles/${P}-bin.tar.xz )"
+fi
+
+DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
+HOMEPAGE="https://www.seabios.org/"
+
+LICENSE="LGPL-3 GPL-3"
+SLOT="0"
+IUSE="+binary debug +seavgabios"
+
+REQUIRED_USE="debug? ( !binary )
+ !amd64? ( !x86? ( binary ) )"
+
+# The amd64/x86 check is needed to workaround #570892.
+SOURCE_DEPEND="
+ >=sys-power/iasl-20060912
+ ${PYTHON_DEPS}"
+DEPEND="
+ !binary? (
+ amd64? ( ${SOURCE_DEPEND} )
+ x86? ( ${SOURCE_DEPEND} )
+ )"
+RDEPEND=""
+
+pkg_pretend() {
+ if ! use binary; then
+ ewarn "You have decided to compile your own SeaBIOS. This is not"
+ ewarn "supported by upstream unless you use their recommended"
+ ewarn "toolchain (which you are not)."
+ elog
+ ewarn "If you are intending to use this build with QEMU, realize"
+ ewarn "you will not receive any support if you have compiled your"
+ ewarn "own SeaBIOS. Virtual machines subtly fail based on changes"
+ ewarn "in SeaBIOS."
+ fi
+}
+
+pkg_setup() {
+ use binary || python-any-r1_pkg_setup
+}
+
+src_unpack() {
+ default
+
+ # This simplifies the logic between binary & source builds.
+ mkdir -p "${S}"
+}
+
+src_prepare() {
+ default
+
+ # Ensure precompiled iasl files are never used
+ find "${WORKDIR}" -name '*.hex' -delete || die
+}
+
+src_configure() {
+ use binary && return
+
+ tc-ld-disable-gold #438058
+
+ if use debug ; then
+ echo "CONFIG_DEBUG_LEVEL=8" >.config
+ fi
+ _emake config
+}
+
+_emake() {
+ LANG=C \
+ emake V=1 \
+ CC="$(tc-getCC)" \
+ LD="$(tc-getLD)" \
+ AR="$(tc-getAR)" \
+ AS="$(tc-getAS)" \
+ OBJCOPY="$(tc-getOBJCOPY)" \
+ RANLIB="$(tc-getRANLIB)" \
+ OBJDUMP="$(tc-getOBJDUMP)" \
+ HOST_CC="$(tc-getBUILD_CC)" \
+ VERSION="Gentoo/${EGIT_COMMIT:-${PVR}}" \
+ "$@"
+}
+
+src_compile() {
+ use binary && return
+
+ cp "${FILESDIR}/seabios/config.seabios-256k" .config || die
+ _emake oldnoconfig
+ _emake iasl
+ _emake out/bios.bin
+ mv out/bios.bin ../bios-256k.bin || die
+
+ if use seavgabios ; then
+ local config t targets=(
+ cirrus
+ isavga
+ qxl
+ stdvga
+ virtio
+ vmware
+ )
+ for t in "${targets[@]}" ; do
+ emake clean distclean
+ cp "${FILESDIR}/seavgabios/config.vga-${t}" .config || die
+ _emake oldnoconfig
+ _emake out/vgabios.bin
+ cp out/vgabios.bin ../vgabios-${t}.bin || die
+ done
+ fi
+}
+
+src_install() {
+ insinto /usr/share/seabios
+ use binary && doins ../bios.bin
+ doins ../bios-256k.bin
+
+ if use seavgabios ; then
+ insinto /usr/share/seavgabios
+ doins ../vgabios*.bin
+ fi
+}
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2019-08-18 21:51 Agostino Sarubbo
0 siblings, 0 replies; 59+ messages in thread
From: Agostino Sarubbo @ 2019-08-18 21:51 UTC (permalink / raw
To: gentoo-commits
commit: 090dd4be9b6ba7fe603f4596014890d2605a8de0
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Sun Aug 18 21:49:13 2019 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Sun Aug 18 21:49:13 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=090dd4be
sys-firmware/seabios: amd64 stable wrt bug #678906
Package-Manager: Portage-2.3.69, Repoman-2.3.16
RepoMan-Options: --include-arches="amd64"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-firmware/seabios/seabios-1.12.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.12.0.ebuild b/sys-firmware/seabios/seabios-1.12.0.ebuild
index 1ab0b09fd5c..388ded2457b 100644
--- a/sys-firmware/seabios/seabios-1.12.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.12.0.ebuild
@@ -16,7 +16,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+ KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
# Binary versions taken from fedora:
# http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2019-08-19 11:37 Agostino Sarubbo
0 siblings, 0 replies; 59+ messages in thread
From: Agostino Sarubbo @ 2019-08-19 11:37 UTC (permalink / raw
To: gentoo-commits
commit: c4f95a2560cf66c06084e9768ea52830c1d474d8
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Mon Aug 19 11:37:01 2019 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Mon Aug 19 11:37:01 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c4f95a25
sys-firmware/seabios: x86 stable wrt bug #678906
Package-Manager: Portage-2.3.69, Repoman-2.3.16
RepoMan-Options: --include-arches="x86"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-firmware/seabios/seabios-1.12.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.12.0.ebuild b/sys-firmware/seabios/seabios-1.12.0.ebuild
index 388ded2457b..39fcf77d807 100644
--- a/sys-firmware/seabios/seabios-1.12.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.12.0.ebuild
@@ -16,7 +16,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd"
+ KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc x86 ~amd64-fbsd ~x86-fbsd"
# Binary versions taken from fedora:
# http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2020-02-10 13:26 Michał Górny
0 siblings, 0 replies; 59+ messages in thread
From: Michał Górny @ 2020-02-10 13:26 UTC (permalink / raw
To: gentoo-commits
commit: a6d08b051044ddcd7fe9fd638f32d98db3722b32
Author: Michał Górny <mgorny <AT> gentoo <DOT> org>
AuthorDate: Mon Feb 10 13:06:09 2020 +0000
Commit: Michał Górny <mgorny <AT> gentoo <DOT> org>
CommitDate: Mon Feb 10 13:26:39 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a6d08b05
sys-firmware/seabios: Remove py2 where possible
Signed-off-by: Michał Górny <mgorny <AT> gentoo.org>
sys-firmware/seabios/seabios-1.10.2.ebuild | 2 +-
sys-firmware/seabios/seabios-1.11.0-r1.ebuild | 2 +-
sys-firmware/seabios/seabios-1.11.0.ebuild | 2 +-
sys-firmware/seabios/seabios-1.12.0.ebuild | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/sys-firmware/seabios/seabios-1.10.2.ebuild b/sys-firmware/seabios/seabios-1.10.2.ebuild
index 96b9da9360f..35dd9f2f363 100644
--- a/sys-firmware/seabios/seabios-1.10.2.ebuild
+++ b/sys-firmware/seabios/seabios-1.10.2.ebuild
@@ -3,7 +3,7 @@
EAPI="6"
-PYTHON_COMPAT=( python{2_7,3_6} )
+PYTHON_COMPAT=( python3_6 )
inherit eutils toolchain-funcs python-any-r1
diff --git a/sys-firmware/seabios/seabios-1.11.0-r1.ebuild b/sys-firmware/seabios/seabios-1.11.0-r1.ebuild
index bcc02d3edef..bec4935ce78 100644
--- a/sys-firmware/seabios/seabios-1.11.0-r1.ebuild
+++ b/sys-firmware/seabios/seabios-1.11.0-r1.ebuild
@@ -3,7 +3,7 @@
EAPI="6"
-PYTHON_COMPAT=( python{2_7,3_6} )
+PYTHON_COMPAT=( python3_6 )
inherit eutils toolchain-funcs python-any-r1
diff --git a/sys-firmware/seabios/seabios-1.11.0.ebuild b/sys-firmware/seabios/seabios-1.11.0.ebuild
index 44d333f9305..5d966e192c4 100644
--- a/sys-firmware/seabios/seabios-1.11.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.11.0.ebuild
@@ -3,7 +3,7 @@
EAPI="6"
-PYTHON_COMPAT=( python{2_7,3_6} )
+PYTHON_COMPAT=( python3_6 )
inherit eutils toolchain-funcs python-any-r1
diff --git a/sys-firmware/seabios/seabios-1.12.0.ebuild b/sys-firmware/seabios/seabios-1.12.0.ebuild
index 05f8b26c7ad..d09ddbb9097 100644
--- a/sys-firmware/seabios/seabios-1.12.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.12.0.ebuild
@@ -3,7 +3,7 @@
EAPI="7"
-PYTHON_COMPAT=( python{2_7,3_6} )
+PYTHON_COMPAT=( python3_6 )
inherit eutils toolchain-funcs python-any-r1
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2020-08-19 22:40 Sam James
0 siblings, 0 replies; 59+ messages in thread
From: Sam James @ 2020-08-19 22:40 UTC (permalink / raw
To: gentoo-commits
commit: a9b67a6107fbbbdc9b58a1c6acf4d617a35a34aa
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Wed Aug 19 22:38:55 2020 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Wed Aug 19 22:38:55 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a9b67a61
sys-firmware/seabios: arm64 stable (bug #738056)
Package-Manager: Portage-3.0.3, Repoman-3.0.0
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-firmware/seabios/seabios-1.12.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.12.0.ebuild b/sys-firmware/seabios/seabios-1.12.0.ebuild
index 80dc73a3d8c..c9b5d726d58 100644
--- a/sys-firmware/seabios/seabios-1.12.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.12.0.ebuild
@@ -16,7 +16,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc x86"
+ KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc x86"
# Binary versions taken from fedora:
# http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2020-11-07 3:49 Georgy Yakovlev
0 siblings, 0 replies; 59+ messages in thread
From: Georgy Yakovlev @ 2020-11-07 3:49 UTC (permalink / raw
To: gentoo-commits
commit: 95bb5d32221231fbfdcaeebace207c08d78630a4
Author: Georgy Yakovlev <gyakovlev <AT> gentoo <DOT> org>
AuthorDate: Sat Nov 7 01:43:12 2020 +0000
Commit: Georgy Yakovlev <gyakovlev <AT> gentoo <DOT> org>
CommitDate: Sat Nov 7 02:09:05 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=95bb5d32
sys-firmware/seabios: 1.12.0 ppc64 stable, bug #750047
Package-Manager: Portage-3.0.9, Repoman-3.0.2
Signed-off-by: Georgy Yakovlev <gyakovlev <AT> gentoo.org>
sys-firmware/seabios/seabios-1.12.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.12.0.ebuild b/sys-firmware/seabios/seabios-1.12.0.ebuild
index c9b5d726d58..53616e2943b 100644
--- a/sys-firmware/seabios/seabios-1.12.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.12.0.ebuild
@@ -16,7 +16,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc x86"
+ KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ppc64 ~s390 ~sparc x86"
# Binary versions taken from fedora:
# http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2020-12-28 17:29 Matthias Maier
0 siblings, 0 replies; 59+ messages in thread
From: Matthias Maier @ 2020-12-28 17:29 UTC (permalink / raw
To: gentoo-commits
commit: 71dd38ae51b39f2db7a8024fb655d17db99bd405
Author: Matthias Maier <tamiko <AT> gentoo <DOT> org>
AuthorDate: Mon Dec 28 17:29:16 2020 +0000
Commit: Matthias Maier <tamiko <AT> gentoo <DOT> org>
CommitDate: Mon Dec 28 17:29:16 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=71dd38ae
sys-firmware/seabios: update python compat
Closes: https://bugs.gentoo.org/718534
Package-Manager: Portage-3.0.12, Repoman-3.0.2
Signed-off-by: Matthias Maier <tamiko <AT> gentoo.org>
sys-firmware/seabios/seabios-1.10.2.ebuild | 2 +-
sys-firmware/seabios/seabios-1.11.0-r1.ebuild | 2 +-
sys-firmware/seabios/seabios-1.11.0.ebuild | 2 +-
sys-firmware/seabios/seabios-1.12.0.ebuild | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/sys-firmware/seabios/seabios-1.10.2.ebuild b/sys-firmware/seabios/seabios-1.10.2.ebuild
index 11231f42e3b..0175c19a646 100644
--- a/sys-firmware/seabios/seabios-1.10.2.ebuild
+++ b/sys-firmware/seabios/seabios-1.10.2.ebuild
@@ -3,7 +3,7 @@
EAPI="6"
-PYTHON_COMPAT=( python3_6 )
+PYTHON_COMPAT=( python3_{7..9} )
inherit eutils toolchain-funcs python-any-r1
diff --git a/sys-firmware/seabios/seabios-1.11.0-r1.ebuild b/sys-firmware/seabios/seabios-1.11.0-r1.ebuild
index 794dcb1afda..4cdaf7f3809 100644
--- a/sys-firmware/seabios/seabios-1.11.0-r1.ebuild
+++ b/sys-firmware/seabios/seabios-1.11.0-r1.ebuild
@@ -3,7 +3,7 @@
EAPI="6"
-PYTHON_COMPAT=( python3_6 )
+PYTHON_COMPAT=( python3_{7..9} )
inherit eutils toolchain-funcs python-any-r1
diff --git a/sys-firmware/seabios/seabios-1.11.0.ebuild b/sys-firmware/seabios/seabios-1.11.0.ebuild
index 43e3d9d88e7..a7aacee36b4 100644
--- a/sys-firmware/seabios/seabios-1.11.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.11.0.ebuild
@@ -3,7 +3,7 @@
EAPI="6"
-PYTHON_COMPAT=( python3_6 )
+PYTHON_COMPAT=( python3_{7..9} )
inherit eutils toolchain-funcs python-any-r1
diff --git a/sys-firmware/seabios/seabios-1.12.0.ebuild b/sys-firmware/seabios/seabios-1.12.0.ebuild
index 53616e2943b..6ff70eca1b2 100644
--- a/sys-firmware/seabios/seabios-1.12.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.12.0.ebuild
@@ -3,7 +3,7 @@
EAPI="7"
-PYTHON_COMPAT=( python3_6 )
+PYTHON_COMPAT=( python3_{7..9} )
inherit eutils toolchain-funcs python-any-r1
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2021-01-04 21:22 Matthias Maier
0 siblings, 0 replies; 59+ messages in thread
From: Matthias Maier @ 2021-01-04 21:22 UTC (permalink / raw
To: gentoo-commits
commit: 259e75767ee362c7ab378e11944d441519559629
Author: Luke Dashjr <luke-jr+git <AT> utopios <DOT> org>
AuthorDate: Tue Mar 31 18:01:37 2020 +0000
Commit: Matthias Maier <tamiko <AT> gentoo <DOT> org>
CommitDate: Mon Jan 4 21:21:34 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=259e7576
sys-firmware/seabios: Support USE=-binary on non-x86
For non-x86 platforms, building from source can be done using a
cross-compiler provided by crossdev.
Also adjusts arch package.use.{force,mask} as appropriate.
Tested on a Talos II / POWER9v2 running ppc64
Closes: https://bugs.gentoo.org/763303
Closes: https://github.com/gentoo/gentoo/pull/15189
Signed-off-by: Luke Dashjr <luke-jr+git <AT> utopios.org>
Signed-off-by: Matthias Maier <tamiko <AT> gentoo.org>
sys-firmware/seabios/seabios-1.12.0-r1.ebuild | 171 ++++++++++++++++++++++++++
1 file changed, 171 insertions(+)
diff --git a/sys-firmware/seabios/seabios-1.12.0-r1.ebuild b/sys-firmware/seabios/seabios-1.12.0-r1.ebuild
new file mode 100644
index 00000000000..23b9137e9fc
--- /dev/null
+++ b/sys-firmware/seabios/seabios-1.12.0-r1.ebuild
@@ -0,0 +1,171 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="7"
+
+PYTHON_COMPAT=( python3_{7..9} )
+
+inherit eutils toolchain-funcs python-any-r1
+
+# SeaBIOS maintainers sometimes don't release stable tarballs or stable
+# binaries to generate the stable tarball the following is necessary:
+# git clone git://git.seabios.org/seabios.git && cd seabios
+# git archive --output seabios-${PV}.tar.gz --prefix seabios-${PV}/ rel-${PV}
+
+if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
+ EGIT_REPO_URI="git://git.seabios.org/seabios.git"
+ inherit git-r3
+else
+ KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc ~x86"
+
+ # Binary versions taken from fedora:
+ # http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/
+ # seabios-bin-1.12.1-2.fc31.noarch.rpm
+ # seavgabios-bin-1.12.1-2.fc31.noarch.rpm
+ SRC_URI="
+ !binary? ( https://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
+ binary? ( https://dev.gentoo.org/~tamiko/distfiles/${P}-bin.tar.xz )"
+fi
+
+DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
+HOMEPAGE="https://www.seabios.org/"
+
+LICENSE="LGPL-3 GPL-3"
+SLOT="0"
+IUSE="+binary debug +seavgabios"
+
+REQUIRED_USE="debug? ( !binary )"
+
+SOURCE_DEPEND="
+ >=sys-power/iasl-20060912
+ ${PYTHON_DEPS}"
+DEPEND="
+ !binary? (
+ ${SOURCE_DEPEND}
+ )"
+RDEPEND=""
+
+choose_target_chost() {
+ if [[ -n "${CC}" ]]; then
+ ${CC} -dumpmachine
+ return
+ fi
+
+ if use amd64 || use x86; then
+ # Use the native compiler
+ echo "${CHOST}"
+ return
+ fi
+
+ local i
+ for i in x86_64 i686 i586 i486 i386 ; do
+ i=${i}-pc-linux-gnu
+ type -P ${i}-gcc > /dev/null && echo ${i} && return
+ done
+}
+
+pkg_pretend() {
+ if ! use binary; then
+ ewarn "You have decided to compile your own SeaBIOS. This is not"
+ ewarn "supported by upstream unless you use their recommended"
+ ewarn "toolchain (which you are not)."
+ elog
+ ewarn "If you are intending to use this build with QEMU, realize"
+ ewarn "you will not receive any support if you have compiled your"
+ ewarn "own SeaBIOS. Virtual machines subtly fail based on changes"
+ ewarn "in SeaBIOS."
+ if [[ -z "$(choose_target_chost)" ]]; then
+ elog
+ eerror "Before you can compile ${PN}[-binary], you need to install a x86 cross-compiler"
+ eerror "Run the following commands:"
+ eerror " emerge crossdev"
+ eerror " crossdev --stable -t x86_64-pc-linux-gnu"
+ die "cross-compiler is needed"
+ fi
+ fi
+}
+
+pkg_setup() {
+ use binary || python-any-r1_pkg_setup
+}
+
+src_unpack() {
+ default
+
+ # This simplifies the logic between binary & source builds.
+ mkdir -p "${S}"
+}
+
+src_prepare() {
+ default
+
+ # Ensure precompiled iasl files are never used
+ find "${WORKDIR}" -name '*.hex' -delete || die
+}
+
+src_configure() {
+ use binary && return
+
+ tc-ld-disable-gold #438058
+
+ if use debug ; then
+ echo "CONFIG_DEBUG_LEVEL=8" >.config
+ fi
+ _emake config
+}
+
+_emake() {
+ LANG=C \
+ emake V=1 \
+ CC="$(tc-getCC)" \
+ LD="$(tc-getLD)" \
+ AR="$(tc-getAR)" \
+ AS="$(tc-getAS)" \
+ OBJCOPY="$(tc-getOBJCOPY)" \
+ RANLIB="$(tc-getRANLIB)" \
+ OBJDUMP="$(tc-getOBJDUMP)" \
+ HOST_CC="$(tc-getBUILD_CC)" \
+ VERSION="Gentoo/${EGIT_COMMIT:-${PVR}}" \
+ "$@"
+}
+
+src_compile() {
+ use binary && return
+
+ local TARGET_CHOST=$(choose_target_chost)
+
+ cp "${FILESDIR}/seabios/config.seabios-256k" .config || die
+ _emake oldnoconfig
+ CHOST="${TARGET_CHOST}" _emake iasl
+ CHOST="${TARGET_CHOST}" _emake out/bios.bin
+ mv out/bios.bin ../bios-256k.bin || die
+
+ if use seavgabios ; then
+ local config t targets=(
+ cirrus
+ isavga
+ qxl
+ stdvga
+ virtio
+ vmware
+ )
+ for t in "${targets[@]}" ; do
+ emake clean distclean
+ cp "${FILESDIR}/seavgabios/config.vga-${t}" .config || die
+ _emake oldnoconfig
+ CHOST="${TARGET_CHOST}" _emake out/vgabios.bin
+ cp out/vgabios.bin ../vgabios-${t}.bin || die
+ done
+ fi
+}
+
+src_install() {
+ insinto /usr/share/seabios
+ use binary && doins ../bios.bin
+ doins ../bios-256k.bin
+
+ if use seavgabios ; then
+ insinto /usr/share/seavgabios
+ doins ../vgabios*.bin
+ fi
+}
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2021-04-05 1:06 Matthias Maier
0 siblings, 0 replies; 59+ messages in thread
From: Matthias Maier @ 2021-04-05 1:06 UTC (permalink / raw
To: gentoo-commits
commit: 6cb2f8dbfef29d3ae1618cfecbbc898b5e6465ca
Author: Matthias Maier <tamiko <AT> gentoo <DOT> org>
AuthorDate: Mon Apr 5 00:14:27 2021 +0000
Commit: Matthias Maier <tamiko <AT> gentoo <DOT> org>
CommitDate: Mon Apr 5 01:05:11 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=6cb2f8db
sys-firmware/seabios: drop old
Package-Manager: Portage-3.0.18, Repoman-3.0.3
Signed-off-by: Matthias Maier <tamiko <AT> gentoo.org>
sys-firmware/seabios/Manifest | 4 -
sys-firmware/seabios/seabios-1.10.2.ebuild | 140 ---------------------
sys-firmware/seabios/seabios-1.11.0-r1.ebuild | 171 --------------------------
sys-firmware/seabios/seabios-1.11.0.ebuild | 137 ---------------------
4 files changed, 452 deletions(-)
diff --git a/sys-firmware/seabios/Manifest b/sys-firmware/seabios/Manifest
index 8c598e824f6..15efe729531 100644
--- a/sys-firmware/seabios/Manifest
+++ b/sys-firmware/seabios/Manifest
@@ -1,6 +1,2 @@
-DIST seabios-1.10.2-bin.tar.xz 121172 BLAKE2B 9d4ff624b638773e59bbf6674fb8630bd815d75af1a81db4de7f9740c37485330e6d054448f2301a97455ff0d3190d988ce0348eac78bd978982b6ce5146e4f6 SHA512 a46ce389b8b0fe7182a3dc2954fab7e0ef27ac65823e3785c247ccf77c37eaa746d94f74a4a29a221aa16ab508cf07ec8d399aa612d5c0184b48bce24c663b69
-DIST seabios-1.10.2.tar.gz 589283 BLAKE2B 08fdbecf7fb06629db472adb05a780249dbf0e0a44d04dcced5480d631c133f74ecd04b04486db3bb817b8e119e783c4b09c3ade15b9a6cc956537e9f7204514 SHA512 ea8396fe247a3bd16b43ab775cf8e23f139673b94e83f450cadb094cc8117ca7e9ef518162d965209d5ab091c96f70ec5cc8ec8d15b638e06c4c8f7a0e1609dc
-DIST seabios-1.11.0-bin.tar.xz 158552 BLAKE2B 44c42b9eea70a090ad51296949fe79e5360b569bae791fe84f447061f8dbcdb6b601501e2cc1607b62308f3118087386d15ba32c8495202f62f9f9a1e3cf27c3 SHA512 03a1523dc99dbf6e353e7844a4f12020d88bf8d5cbfd187007663ab1b02447b02694f27ee93aa46a18a5ab161f13b1ffe62f2d0f678cd86975a3d53295a6eb1e
-DIST seabios-1.11.0.tar.gz 607746 BLAKE2B 9f688be6b8f7c0fcbd72b59ac649a9c763fdd9e2971a4d85636c9972efc0ad42082a1622a8c41156ad1e2063907349c2e02cff9aeb444844dc445b5f7d6062bb SHA512 cae79c720bfbba3321777bbc6d5bde432fe56e2ba8f1be8acfebbde0bd453a58e889f5fa24db6055dca0a3a56d35b907761723ea35ef248c5f812129d0a27b77
DIST seabios-1.12.0-bin.tar.xz 162492 BLAKE2B 9a5a349226ed7efbed328493dc057e232203b251677a23f1f09c133743ff0ca6b05270c9d27460be1d8897888fe23ff7bdfa122023fa8ddb23af03d5b9b6f8dd SHA512 f7a0395d621245093bb9a278d95ecc3d4e8d23f620058cd4fddaf885c8b86256f6258f3fd8173c1d24c03306f44d180e768bf8005ee123bc4b699b9f0ca371be
DIST seabios-1.12.0.tar.gz 613542 BLAKE2B f145c2db716996bfa9e5c014086ccfaa8ae96ebc158f34303b122b7bf209408c567665d8691364df8d8e886f63e0e72a3f3cd319dfa86ef581023201b5d94e53 SHA512 e52c5363e5bb37b5286e55545aa06bd126218f9d0e3a06ac2e189de68fe3de3256c11ca1bb13357a9c384d7e3af6284083ff3aa587688b5de04ef11b97bdfa27
diff --git a/sys-firmware/seabios/seabios-1.10.2.ebuild b/sys-firmware/seabios/seabios-1.10.2.ebuild
deleted file mode 100644
index 0175c19a646..00000000000
--- a/sys-firmware/seabios/seabios-1.10.2.ebuild
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="6"
-
-PYTHON_COMPAT=( python3_{7..9} )
-
-inherit eutils toolchain-funcs python-any-r1
-
-# SeaBIOS maintainers sometimes don't release stable tarballs or stable
-# binaries to generate the stable tarball the following is necessary:
-# git clone git://git.seabios.org/seabios.git && cd seabios
-# git archive --output seabios-${PV}.tar.gz --prefix seabios-${PV}/ rel-${PV}
-
-if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
- EGIT_REPO_URI="git://git.seabios.org/seabios.git"
- inherit git-r3
-else
- KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc x86"
-
- # Binary versions taken from fedora:
- # http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/
- # seabios-bin-1.10.2-1.fc27.noarch.rpm
- # seavgabios-bin-1.10.2-1.fc27.noarch.rpm
- SRC_URI="
- !binary? ( https://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
- binary? ( https://dev.gentoo.org/~tamiko/distfiles/${P}-bin.tar.xz )"
-fi
-
-DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
-HOMEPAGE="https://www.seabios.org/"
-
-LICENSE="LGPL-3 GPL-3"
-SLOT="0"
-IUSE="+binary debug +seavgabios"
-
-REQUIRED_USE="debug? ( !binary )
- !amd64? ( !x86? ( binary ) )"
-
-# The amd64/x86 check is needed to workaround #570892.
-SOURCE_DEPEND="
- >=sys-power/iasl-20060912
- ${PYTHON_DEPS}"
-DEPEND="
- !binary? (
- amd64? ( ${SOURCE_DEPEND} )
- x86? ( ${SOURCE_DEPEND} )
- )"
-RDEPEND=""
-
-pkg_pretend() {
- if ! use binary; then
- ewarn "You have decided to compile your own SeaBIOS. This is not"
- ewarn "supported by upstream unless you use their recommended"
- ewarn "toolchain (which you are not)."
- elog
- ewarn "If you are intending to use this build with QEMU, realize"
- ewarn "you will not receive any support if you have compiled your"
- ewarn "own SeaBIOS. Virtual machines subtly fail based on changes"
- ewarn "in SeaBIOS."
- fi
-}
-
-pkg_setup() {
- use binary || python-any-r1_pkg_setup
-}
-
-src_unpack() {
- default
-
- # This simplifies the logic between binary & source builds.
- mkdir -p "${S}"
-}
-
-src_configure() {
- use binary && return
-
- tc-ld-disable-gold #438058
-
- if use debug ; then
- echo "CONFIG_DEBUG_LEVEL=8" >.config
- fi
- _emake config
-}
-
-_emake() {
- LANG=C \
- emake V=1 \
- CC="$(tc-getCC)" \
- LD="$(tc-getLD)" \
- AR="$(tc-getAR)" \
- OBJCOPY="$(tc-getOBJCOPY)" \
- RANLIB="$(tc-getRANLIB)" \
- OBJDUMP="$(tc-getOBJDUMP)" \
- HOST_CC="$(tc-getBUILD_CC)" \
- VERSION="Gentoo/${EGIT_COMMIT:-${PVR}}" \
- "$@"
-}
-
-src_compile() {
- use binary && return
-
- for t in 128k 256k ; do
- cp "${FILESDIR}/seabios/config.seabios-${t}" .config || die
- _emake oldnoconfig
- _emake out/bios.bin
- mv out/bios.bin ../bios-${t}.bin || die
- done
-
- if use seavgabios ; then
- local config t targets=(
- cirrus
- isavga
- qxl
- stdvga
- virtio
- vmware
- )
- for t in "${targets[@]}" ; do
- emake clean distclean
- cp "${FILESDIR}/seavgabios/config.vga-${t}" .config || die
- _emake oldnoconfig
- _emake out/vgabios.bin
- cp out/vgabios.bin ../vgabios-${t}.bin || die
- done
- fi
-}
-
-src_install() {
-
- insinto /usr/share/seabios
- use binary && doins ../bios.bin
- use !binary && newins ../bios-128k.bin bios.bin
- doins ../bios-256k.bin
-
- if use seavgabios ; then
- insinto /usr/share/seavgabios
- doins ../vgabios*.bin
- fi
-}
diff --git a/sys-firmware/seabios/seabios-1.11.0-r1.ebuild b/sys-firmware/seabios/seabios-1.11.0-r1.ebuild
deleted file mode 100644
index 4cdaf7f3809..00000000000
--- a/sys-firmware/seabios/seabios-1.11.0-r1.ebuild
+++ /dev/null
@@ -1,171 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="6"
-
-PYTHON_COMPAT=( python3_{7..9} )
-
-inherit eutils toolchain-funcs python-any-r1
-
-# SeaBIOS maintainers sometimes don't release stable tarballs or stable
-# binaries to generate the stable tarball the following is necessary:
-# git clone git://git.seabios.org/seabios.git && cd seabios
-# git archive --output seabios-${PV}.tar.gz --prefix seabios-${PV}/ rel-${PV}
-
-if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
- EGIT_REPO_URI="git://git.seabios.org/seabios.git"
- inherit git-r3
-else
- KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc ~x86"
-
- # Binary versions taken from fedora:
- # http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/
- # seabios-bin-1.10.2-1.fc27.noarch.rpm
- # seavgabios-bin-1.10.2-1.fc27.noarch.rpm
- SRC_URI="
- !binary? ( https://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
- binary? ( https://dev.gentoo.org/~tamiko/distfiles/${P}-bin.tar.xz )"
-fi
-
-DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
-HOMEPAGE="https://www.seabios.org/"
-
-LICENSE="LGPL-3 GPL-3"
-SLOT="0"
-IUSE="+binary debug +seavgabios"
-
-REQUIRED_USE="debug? ( !binary )"
-
-SOURCE_DEPEND="
- >=sys-power/iasl-20060912
- ${PYTHON_DEPS}"
-DEPEND="
- !binary? (
- ${SOURCE_DEPEND}
- )"
-RDEPEND=""
-
-choose_target_chost() {
- if [[ -n "${CC}" ]]; then
- ${CC} -dumpmachine
- return
- fi
-
- if use amd64 || use x86; then
- # Use the native compiler
- echo "${CHOST}"
- return
- fi
-
- local i
- for i in x86_64 i686 i586 i486 i386 ; do
- i=${i}-pc-linux-gnu
- type -P ${i}-gcc > /dev/null && echo ${i} && return
- done
-}
-
-pkg_pretend() {
- if ! use binary; then
- ewarn "You have decided to compile your own SeaBIOS. This is not"
- ewarn "supported by upstream unless you use their recommended"
- ewarn "toolchain (which you are not)."
- elog
- ewarn "If you are intending to use this build with QEMU, realize"
- ewarn "you will not receive any support if you have compiled your"
- ewarn "own SeaBIOS. Virtual machines subtly fail based on changes"
- ewarn "in SeaBIOS."
- if [[ -z "$(choose_target_chost)" ]]; then
- elog
- eerror "Before you can compile ${PN}[-binary], you need to install a x86 cross-compiler"
- eerror "Run the following commands:"
- eerror " emerge crossdev"
- eerror " crossdev --stable -t x86_64-pc-linux-gnu"
- die "cross-compiler is needed"
- fi
- fi
-}
-
-pkg_setup() {
- use binary || python-any-r1_pkg_setup
-}
-
-src_unpack() {
- default
-
- # This simplifies the logic between binary & source builds.
- mkdir -p "${S}"
-}
-
-src_prepare() {
- default
-
- # Ensure precompiled iasl files are never used
- find "${WORKDIR}" -name '*.hex' -delete || die
-}
-
-src_configure() {
- use binary && return
-
- tc-ld-disable-gold #438058
-
- if use debug ; then
- echo "CONFIG_DEBUG_LEVEL=8" >.config
- fi
- _emake config
-}
-
-_emake() {
- LANG=C \
- emake V=1 \
- CC="$(tc-getCC)" \
- LD="$(tc-getLD)" \
- AR="$(tc-getAR)" \
- AS="$(tc-getAS)" \
- OBJCOPY="$(tc-getOBJCOPY)" \
- RANLIB="$(tc-getRANLIB)" \
- OBJDUMP="$(tc-getOBJDUMP)" \
- HOST_CC="$(tc-getBUILD_CC)" \
- VERSION="Gentoo/${EGIT_COMMIT:-${PVR}}" \
- "$@"
-}
-
-src_compile() {
- use binary && return
-
- local TARGET_CHOST=$(choose_target_chost)
-
- cp "${FILESDIR}/seabios/config.seabios-256k" .config || die
- _emake oldnoconfig
- CHOST="${TARGET_CHOST}" _emake iasl
- CHOST="${TARGET_CHOST}" _emake out/bios.bin
- mv out/bios.bin ../bios-256k.bin || die
-
- if use seavgabios ; then
- local config t targets=(
- cirrus
- isavga
- qxl
- stdvga
- virtio
- vmware
- )
- for t in "${targets[@]}" ; do
- emake clean distclean
- cp "${FILESDIR}/seavgabios/config.vga-${t}" .config || die
- _emake oldnoconfig
- CHOST="${TARGET_CHOST}" _emake out/vgabios.bin
- cp out/vgabios.bin ../vgabios-${t}.bin || die
- done
- fi
-}
-
-src_install() {
- insinto /usr/share/seabios
- use binary && doins ../bios.bin
- doins ../bios-256k.bin
-
- if use seavgabios ; then
- insinto /usr/share/seavgabios
- doins ../vgabios*.bin
- fi
-}
diff --git a/sys-firmware/seabios/seabios-1.11.0.ebuild b/sys-firmware/seabios/seabios-1.11.0.ebuild
deleted file mode 100644
index a7aacee36b4..00000000000
--- a/sys-firmware/seabios/seabios-1.11.0.ebuild
+++ /dev/null
@@ -1,137 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="6"
-
-PYTHON_COMPAT=( python3_{7..9} )
-
-inherit eutils toolchain-funcs python-any-r1
-
-# SeaBIOS maintainers sometimes don't release stable tarballs or stable
-# binaries to generate the stable tarball the following is necessary:
-# git clone git://git.seabios.org/seabios.git && cd seabios
-# git archive --output seabios-${PV}.tar.gz --prefix seabios-${PV}/ rel-${PV}
-
-if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
- EGIT_REPO_URI="git://git.seabios.org/seabios.git"
- inherit git-r3
-else
- KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc x86"
-
- # Binary versions taken from fedora:
- # http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/
- # seabios-bin-1.10.2-1.fc27.noarch.rpm
- # seavgabios-bin-1.10.2-1.fc27.noarch.rpm
- SRC_URI="
- !binary? ( https://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
- binary? ( https://dev.gentoo.org/~tamiko/distfiles/${P}-bin.tar.xz )"
-fi
-
-DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
-HOMEPAGE="https://www.seabios.org/"
-
-LICENSE="LGPL-3 GPL-3"
-SLOT="0"
-IUSE="+binary debug +seavgabios"
-
-REQUIRED_USE="debug? ( !binary )
- !amd64? ( !x86? ( binary ) )"
-
-# The amd64/x86 check is needed to workaround #570892.
-SOURCE_DEPEND="
- >=sys-power/iasl-20060912
- ${PYTHON_DEPS}"
-DEPEND="
- !binary? (
- amd64? ( ${SOURCE_DEPEND} )
- x86? ( ${SOURCE_DEPEND} )
- )"
-RDEPEND=""
-
-pkg_pretend() {
- if ! use binary; then
- ewarn "You have decided to compile your own SeaBIOS. This is not"
- ewarn "supported by upstream unless you use their recommended"
- ewarn "toolchain (which you are not)."
- elog
- ewarn "If you are intending to use this build with QEMU, realize"
- ewarn "you will not receive any support if you have compiled your"
- ewarn "own SeaBIOS. Virtual machines subtly fail based on changes"
- ewarn "in SeaBIOS."
- fi
-}
-
-pkg_setup() {
- use binary || python-any-r1_pkg_setup
-}
-
-src_unpack() {
- default
-
- # This simplifies the logic between binary & source builds.
- mkdir -p "${S}"
-}
-
-src_configure() {
- use binary && return
-
- tc-ld-disable-gold #438058
-
- if use debug ; then
- echo "CONFIG_DEBUG_LEVEL=8" >.config
- fi
- _emake config
-}
-
-_emake() {
- LANG=C \
- emake V=1 \
- CC="$(tc-getCC)" \
- LD="$(tc-getLD)" \
- AR="$(tc-getAR)" \
- OBJCOPY="$(tc-getOBJCOPY)" \
- RANLIB="$(tc-getRANLIB)" \
- OBJDUMP="$(tc-getOBJDUMP)" \
- HOST_CC="$(tc-getBUILD_CC)" \
- VERSION="Gentoo/${EGIT_COMMIT:-${PVR}}" \
- "$@"
-}
-
-src_compile() {
- use binary && return
-
- cp "${FILESDIR}/seabios/config.seabios-256k" .config || die
- _emake oldnoconfig
- _emake out/bios.bin
- mv out/bios.bin ../bios-256k.bin || die
-
- if use seavgabios ; then
- local config t targets=(
- cirrus
- isavga
- qxl
- stdvga
- virtio
- vmware
- )
- for t in "${targets[@]}" ; do
- emake clean distclean
- cp "${FILESDIR}/seavgabios/config.vga-${t}" .config || die
- _emake oldnoconfig
- _emake out/vgabios.bin
- cp out/vgabios.bin ../vgabios-${t}.bin || die
- done
- fi
-}
-
-src_install() {
-
- insinto /usr/share/seabios
- use binary && doins ../bios.bin
- doins ../bios-256k.bin
-
- if use seavgabios ; then
- insinto /usr/share/seavgabios
- doins ../vgabios*.bin
- fi
-}
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2021-04-05 1:06 Matthias Maier
0 siblings, 0 replies; 59+ messages in thread
From: Matthias Maier @ 2021-04-05 1:06 UTC (permalink / raw
To: gentoo-commits
commit: e132ca9b5ff47a2c56bce5155ed1d315853f2ef7
Author: Matthias Maier <tamiko <AT> gentoo <DOT> org>
AuthorDate: Mon Apr 5 00:22:19 2021 +0000
Commit: Matthias Maier <tamiko <AT> gentoo <DOT> org>
CommitDate: Mon Apr 5 01:05:14 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e132ca9b
sys-firmware/seabios: version bump to 1.14.0
Package-Manager: Portage-3.0.18, Repoman-3.0.3
Signed-off-by: Matthias Maier <tamiko <AT> gentoo.org>
sys-firmware/seabios/Manifest | 2 +
sys-firmware/seabios/seabios-1.14.0.ebuild | 166 +++++++++++++++++++++++++++++
2 files changed, 168 insertions(+)
diff --git a/sys-firmware/seabios/Manifest b/sys-firmware/seabios/Manifest
index 15efe729531..0381c39c4ff 100644
--- a/sys-firmware/seabios/Manifest
+++ b/sys-firmware/seabios/Manifest
@@ -1,2 +1,4 @@
DIST seabios-1.12.0-bin.tar.xz 162492 BLAKE2B 9a5a349226ed7efbed328493dc057e232203b251677a23f1f09c133743ff0ca6b05270c9d27460be1d8897888fe23ff7bdfa122023fa8ddb23af03d5b9b6f8dd SHA512 f7a0395d621245093bb9a278d95ecc3d4e8d23f620058cd4fddaf885c8b86256f6258f3fd8173c1d24c03306f44d180e768bf8005ee123bc4b699b9f0ca371be
DIST seabios-1.12.0.tar.gz 613542 BLAKE2B f145c2db716996bfa9e5c014086ccfaa8ae96ebc158f34303b122b7bf209408c567665d8691364df8d8e886f63e0e72a3f3cd319dfa86ef581023201b5d94e53 SHA512 e52c5363e5bb37b5286e55545aa06bd126218f9d0e3a06ac2e189de68fe3de3256c11ca1bb13357a9c384d7e3af6284083ff3aa587688b5de04ef11b97bdfa27
+DIST seabios-1.14.0-bin.tar.xz 170160 BLAKE2B 1ab471ce0c6e27633ec42a66e3069496be84de713baab5de4f297821bd0da26404f7f70abc82e223ec5aa317a878889ae92b019988c72d24f77e7dcc5865f916 SHA512 7964e9bb7dff4fd6593f5d6d64efc4b1460750461b86635dbe5255d2086d619f51711d7a35e4dc20e556f705091c0950afabeddcd2e8876f05ce14f9ca73ed71
+DIST seabios-1.14.0.tar.gz 628985 BLAKE2B cc1126925dab1551a655680d20d06ebf28c12c386500d1ee4df9e1a99403b4c5bc6a66c2cc5ef58b4c3d6d7226f35007506a6a1855c2cf2742469dcb7aba05bb SHA512 215c42f59425f8abd062be7b11fc0e39c977cee5001a2381551b0f851ac337d0dd53c065267e6dee0e710ffd700fa635f9007b89da8dfce0f47122c984ee8146
diff --git a/sys-firmware/seabios/seabios-1.14.0.ebuild b/sys-firmware/seabios/seabios-1.14.0.ebuild
new file mode 100644
index 00000000000..7baa4d25d28
--- /dev/null
+++ b/sys-firmware/seabios/seabios-1.14.0.ebuild
@@ -0,0 +1,166 @@
+# Copyright 1999-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="7"
+
+PYTHON_COMPAT=( python3_{7..9} )
+
+inherit eutils toolchain-funcs python-any-r1
+
+# SeaBIOS maintainers sometimes don't release stable tarballs or stable
+# binaries to generate the stable tarball the following is necessary:
+# git clone git://git.seabios.org/seabios.git && cd seabios
+# git archive --output seabios-${PV}.tar.gz --prefix seabios-${PV}/ rel-${PV}
+
+if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
+ EGIT_REPO_URI="git://git.seabios.org/seabios.git"
+ inherit git-r3
+else
+ KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc ~x86"
+
+ SRC_URI="
+ !binary? ( https://www.seabios.org/downloads/${P}.tar.gz )
+ binary? ( https://dev.gentoo.org/~tamiko/distfiles/${P}-bin.tar.xz )"
+fi
+
+DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
+HOMEPAGE="https://www.seabios.org/"
+
+LICENSE="LGPL-3 GPL-3"
+SLOT="0"
+IUSE="+binary debug +seavgabios"
+
+REQUIRED_USE="debug? ( !binary )"
+
+SOURCE_DEPEND="
+ >=sys-power/iasl-20060912
+ ${PYTHON_DEPS}"
+DEPEND="
+ !binary? (
+ ${SOURCE_DEPEND}
+ )"
+RDEPEND=""
+
+choose_target_chost() {
+ if [[ -n "${CC}" ]]; then
+ ${CC} -dumpmachine
+ return
+ fi
+
+ if use amd64 || use x86; then
+ # Use the native compiler
+ echo "${CHOST}"
+ return
+ fi
+
+ local i
+ for i in x86_64 i686 i586 i486 i386 ; do
+ i=${i}-pc-linux-gnu
+ type -P ${i}-gcc > /dev/null && echo ${i} && return
+ done
+}
+
+pkg_pretend() {
+ if ! use binary; then
+ ewarn "You have decided to compile your own SeaBIOS. This is not"
+ ewarn "supported by upstream unless you use their recommended"
+ ewarn "toolchain (which you are not)."
+ elog
+ ewarn "If you are intending to use this build with QEMU, realize"
+ ewarn "you will not receive any support if you have compiled your"
+ ewarn "own SeaBIOS. Virtual machines subtly fail based on changes"
+ ewarn "in SeaBIOS."
+ if [[ -z "$(choose_target_chost)" ]]; then
+ elog
+ eerror "Before you can compile ${PN}[-binary], you need to install a x86 cross-compiler"
+ eerror "Run the following commands:"
+ eerror " emerge crossdev"
+ eerror " crossdev --stable -t x86_64-pc-linux-gnu"
+ die "cross-compiler is needed"
+ fi
+ fi
+}
+
+pkg_setup() {
+ use binary || python-any-r1_pkg_setup
+}
+
+src_unpack() {
+ default
+
+ # This simplifies the logic between binary & source builds.
+ mkdir -p "${S}"
+}
+
+src_prepare() {
+ default
+
+ # Ensure precompiled iasl files are never used
+ find "${WORKDIR}" -name '*.hex' -delete || die
+}
+
+src_configure() {
+ use binary && return
+
+ tc-ld-disable-gold #438058
+
+ if use debug ; then
+ echo "CONFIG_DEBUG_LEVEL=8" >.config
+ fi
+ _emake config
+}
+
+_emake() {
+ LANG=C \
+ emake V=1 \
+ CC="$(tc-getCC)" \
+ LD="$(tc-getLD)" \
+ AR="$(tc-getAR)" \
+ AS="$(tc-getAS)" \
+ OBJCOPY="$(tc-getOBJCOPY)" \
+ RANLIB="$(tc-getRANLIB)" \
+ OBJDUMP="$(tc-getOBJDUMP)" \
+ HOST_CC="$(tc-getBUILD_CC)" \
+ VERSION="Gentoo/${EGIT_COMMIT:-${PVR}}" \
+ "$@"
+}
+
+src_compile() {
+ use binary && return
+
+ local TARGET_CHOST=$(choose_target_chost)
+
+ cp "${FILESDIR}/seabios/config.seabios-256k" .config || die
+ _emake oldnoconfig
+ CHOST="${TARGET_CHOST}" _emake iasl
+ CHOST="${TARGET_CHOST}" _emake out/bios.bin
+ mv out/bios.bin ../bios-256k.bin || die
+
+ if use seavgabios ; then
+ local config t targets=(
+ cirrus
+ isavga
+ qxl
+ stdvga
+ virtio
+ vmware
+ )
+ for t in "${targets[@]}" ; do
+ emake clean distclean
+ cp "${FILESDIR}/seavgabios/config.vga-${t}" .config || die
+ _emake oldnoconfig
+ CHOST="${TARGET_CHOST}" _emake out/vgabios.bin
+ cp out/vgabios.bin ../vgabios-${t}.bin || die
+ done
+ fi
+}
+
+src_install() {
+ insinto /usr/share/seabios
+ doins ../bios-256k.bin
+
+ if use seavgabios ; then
+ insinto /usr/share/seavgabios
+ doins ../vgabios*.bin
+ fi
+}
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2021-04-30 21:44 Sergei Trofimovich
0 siblings, 0 replies; 59+ messages in thread
From: Sergei Trofimovich @ 2021-04-30 21:44 UTC (permalink / raw
To: gentoo-commits
commit: 6478832ac59c19e71654f4bd65b8dbcb8670a32c
Author: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
AuthorDate: Fri Apr 30 21:43:47 2021 +0000
Commit: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
CommitDate: Fri Apr 30 21:44:05 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=6478832a
sys-firmware/seabios: use tool-prefixed strip and cpp
Package-Manager: Portage-3.0.18, Repoman-3.0.3
Signed-off-by: Sergei Trofimovich <slyfox <AT> gentoo.org>
sys-firmware/seabios/seabios-1.14.0-r1.ebuild | 168 ++++++++++++++++++++++++++
1 file changed, 168 insertions(+)
diff --git a/sys-firmware/seabios/seabios-1.14.0-r1.ebuild b/sys-firmware/seabios/seabios-1.14.0-r1.ebuild
new file mode 100644
index 00000000000..a8b5184144a
--- /dev/null
+++ b/sys-firmware/seabios/seabios-1.14.0-r1.ebuild
@@ -0,0 +1,168 @@
+# Copyright 1999-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="7"
+
+PYTHON_COMPAT=( python3_{7..9} )
+
+inherit toolchain-funcs python-any-r1
+
+# SeaBIOS maintainers sometimes don't release stable tarballs or stable
+# binaries to generate the stable tarball the following is necessary:
+# git clone git://git.seabios.org/seabios.git && cd seabios
+# git archive --output seabios-${PV}.tar.gz --prefix seabios-${PV}/ rel-${PV}
+
+if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
+ EGIT_REPO_URI="git://git.seabios.org/seabios.git"
+ inherit git-r3
+else
+ KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc ~x86"
+
+ SRC_URI="
+ !binary? ( https://www.seabios.org/downloads/${P}.tar.gz )
+ binary? ( https://dev.gentoo.org/~tamiko/distfiles/${P}-bin.tar.xz )"
+fi
+
+DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
+HOMEPAGE="https://www.seabios.org/"
+
+LICENSE="LGPL-3 GPL-3"
+SLOT="0"
+IUSE="+binary debug +seavgabios"
+
+REQUIRED_USE="debug? ( !binary )"
+
+SOURCE_DEPEND="
+ >=sys-power/iasl-20060912
+ ${PYTHON_DEPS}"
+DEPEND="
+ !binary? (
+ ${SOURCE_DEPEND}
+ )"
+RDEPEND=""
+
+choose_target_chost() {
+ if [[ -n "${CC}" ]]; then
+ ${CC} -dumpmachine
+ return
+ fi
+
+ if use amd64 || use x86; then
+ # Use the native compiler
+ echo "${CHOST}"
+ return
+ fi
+
+ local i
+ for i in x86_64 i686 i586 i486 i386 ; do
+ i=${i}-pc-linux-gnu
+ type -P ${i}-gcc > /dev/null && echo ${i} && return
+ done
+}
+
+pkg_pretend() {
+ if ! use binary; then
+ ewarn "You have decided to compile your own SeaBIOS. This is not"
+ ewarn "supported by upstream unless you use their recommended"
+ ewarn "toolchain (which you are not)."
+ elog
+ ewarn "If you are intending to use this build with QEMU, realize"
+ ewarn "you will not receive any support if you have compiled your"
+ ewarn "own SeaBIOS. Virtual machines subtly fail based on changes"
+ ewarn "in SeaBIOS."
+ if [[ -z "$(choose_target_chost)" ]]; then
+ elog
+ eerror "Before you can compile ${PN}[-binary], you need to install a x86 cross-compiler"
+ eerror "Run the following commands:"
+ eerror " emerge crossdev"
+ eerror " crossdev --stable -t x86_64-pc-linux-gnu"
+ die "cross-compiler is needed"
+ fi
+ fi
+}
+
+pkg_setup() {
+ use binary || python-any-r1_pkg_setup
+}
+
+src_unpack() {
+ default
+
+ # This simplifies the logic between binary & source builds.
+ mkdir -p "${S}"
+}
+
+src_prepare() {
+ default
+
+ # Ensure precompiled iasl files are never used
+ find "${WORKDIR}" -name '*.hex' -delete || die
+}
+
+src_configure() {
+ use binary && return
+
+ tc-ld-disable-gold #438058
+
+ if use debug ; then
+ echo "CONFIG_DEBUG_LEVEL=8" >.config
+ fi
+ _emake config
+}
+
+_emake() {
+ LANG=C \
+ emake V=1 \
+ CPP="$(tc-getPROG CPP cpp)" \
+ CC="$(tc-getCC)" \
+ LD="$(tc-getLD)" \
+ AR="$(tc-getAR)" \
+ AS="$(tc-getAS)" \
+ OBJCOPY="$(tc-getOBJCOPY)" \
+ RANLIB="$(tc-getRANLIB)" \
+ OBJDUMP="$(tc-getOBJDUMP)" \
+ STRIP="$(tc-getSTRIP)" \
+ HOST_CC="$(tc-getBUILD_CC)" \
+ VERSION="Gentoo/${EGIT_COMMIT:-${PVR}}" \
+ "$@"
+}
+
+src_compile() {
+ use binary && return
+
+ local TARGET_CHOST=$(choose_target_chost)
+
+ cp "${FILESDIR}/seabios/config.seabios-256k" .config || die
+ _emake oldnoconfig
+ CHOST="${TARGET_CHOST}" _emake iasl
+ CHOST="${TARGET_CHOST}" _emake out/bios.bin
+ mv out/bios.bin ../bios-256k.bin || die
+
+ if use seavgabios ; then
+ local config t targets=(
+ cirrus
+ isavga
+ qxl
+ stdvga
+ virtio
+ vmware
+ )
+ for t in "${targets[@]}" ; do
+ _emake clean distclean
+ cp "${FILESDIR}/seavgabios/config.vga-${t}" .config || die
+ _emake oldnoconfig
+ CHOST="${TARGET_CHOST}" _emake out/vgabios.bin
+ cp out/vgabios.bin ../vgabios-${t}.bin || die
+ done
+ fi
+}
+
+src_install() {
+ insinto /usr/share/seabios
+ doins ../bios-256k.bin
+
+ if use seavgabios ; then
+ insinto /usr/share/seavgabios
+ doins ../vgabios*.bin
+ fi
+}
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2021-05-16 0:03 Sam James
0 siblings, 0 replies; 59+ messages in thread
From: Sam James @ 2021-05-16 0:03 UTC (permalink / raw
To: gentoo-commits
commit: e077ecbaa361c5ffee443f9e0c6a25bceca3be9b
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun May 16 00:01:37 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun May 16 00:01:37 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e077ecba
sys-firmware/seabios: Stabilize 1.14.0 arm64, #790374
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-firmware/seabios/seabios-1.14.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.14.0.ebuild b/sys-firmware/seabios/seabios-1.14.0.ebuild
index d17a8f42f97..5fe90474c59 100644
--- a/sys-firmware/seabios/seabios-1.14.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.14.0.ebuild
@@ -16,7 +16,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc ~x86"
+ KEYWORDS="~alpha ~amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc ~x86"
SRC_URI="
!binary? ( https://www.seabios.org/downloads/${P}.tar.gz )
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2021-05-16 23:43 Sam James
0 siblings, 0 replies; 59+ messages in thread
From: Sam James @ 2021-05-16 23:43 UTC (permalink / raw
To: gentoo-commits
commit: a7a344427490d1d32cf63f5c4760a29e8692b867
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun May 16 23:43:26 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun May 16 23:43:26 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a7a34442
sys-firmware/seabios: Stabilize 1.14.0 ppc64, #790374
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-firmware/seabios/seabios-1.14.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.14.0.ebuild b/sys-firmware/seabios/seabios-1.14.0.ebuild
index 5fe90474c59..e088d05c724 100644
--- a/sys-firmware/seabios/seabios-1.14.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.14.0.ebuild
@@ -16,7 +16,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha ~amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc ~x86"
+ KEYWORDS="~alpha ~amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ppc64 ~s390 ~sparc ~x86"
SRC_URI="
!binary? ( https://www.seabios.org/downloads/${P}.tar.gz )
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2021-05-17 3:03 Sam James
0 siblings, 0 replies; 59+ messages in thread
From: Sam James @ 2021-05-17 3:03 UTC (permalink / raw
To: gentoo-commits
commit: c2aa58e0c968c14b6e8e49068f4d53f822a862ce
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Mon May 17 03:03:24 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Mon May 17 03:03:24 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c2aa58e0
sys-firmware/seabios: Stabilize 1.14.0 ppc, #790374
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-firmware/seabios/seabios-1.14.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.14.0.ebuild b/sys-firmware/seabios/seabios-1.14.0.ebuild
index e088d05c724..531da852d99 100644
--- a/sys-firmware/seabios/seabios-1.14.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.14.0.ebuild
@@ -16,7 +16,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha ~amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ppc64 ~s390 ~sparc ~x86"
+ KEYWORDS="~alpha ~amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~s390 ~sparc ~x86"
SRC_URI="
!binary? ( https://www.seabios.org/downloads/${P}.tar.gz )
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2021-05-17 7:47 Agostino Sarubbo
0 siblings, 0 replies; 59+ messages in thread
From: Agostino Sarubbo @ 2021-05-17 7:47 UTC (permalink / raw
To: gentoo-commits
commit: a960cd4987a0da68ca758257d08315142d57bfa7
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Mon May 17 07:46:45 2021 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Mon May 17 07:46:45 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a960cd49
sys-firmware/seabios: amd64 stable wrt bug #790374
Package-Manager: Portage-3.0.13, Repoman-3.0.2
RepoMan-Options: --include-arches="amd64"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-firmware/seabios/seabios-1.14.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.14.0.ebuild b/sys-firmware/seabios/seabios-1.14.0.ebuild
index 531da852d99..c08ef3e663f 100644
--- a/sys-firmware/seabios/seabios-1.14.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.14.0.ebuild
@@ -16,7 +16,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha ~amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~s390 ~sparc ~x86"
+ KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~s390 ~sparc ~x86"
SRC_URI="
!binary? ( https://www.seabios.org/downloads/${P}.tar.gz )
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2021-05-17 7:49 Agostino Sarubbo
0 siblings, 0 replies; 59+ messages in thread
From: Agostino Sarubbo @ 2021-05-17 7:49 UTC (permalink / raw
To: gentoo-commits
commit: f4b3540de87ddb8e22433694bdb4d18b68a0d567
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Mon May 17 07:48:12 2021 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Mon May 17 07:49:03 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=f4b3540d
sys-firmware/seabios: x86 stable wrt bug #790374
Package-Manager: Portage-3.0.13, Repoman-3.0.2
RepoMan-Options: --include-arches="x86"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-firmware/seabios/seabios-1.14.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.14.0.ebuild b/sys-firmware/seabios/seabios-1.14.0.ebuild
index c08ef3e663f..0c4005c94f0 100644
--- a/sys-firmware/seabios/seabios-1.14.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.14.0.ebuild
@@ -16,7 +16,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~s390 ~sparc ~x86"
+ KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~s390 ~sparc x86"
SRC_URI="
!binary? ( https://www.seabios.org/downloads/${P}.tar.gz )
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2021-06-28 1:35 Sam James
0 siblings, 0 replies; 59+ messages in thread
From: Sam James @ 2021-06-28 1:35 UTC (permalink / raw
To: gentoo-commits
commit: 007aa2c3f610505864b9d37ca809a35d32807c75
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Mon Jun 28 01:34:15 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Mon Jun 28 01:34:15 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=007aa2c3
sys-firmware/seabios: Stabilize 1.14.0-r2 amd64, #798858
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-firmware/seabios/seabios-1.14.0-r2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
index 1e33e9260a5..0f248ddfe81 100644
--- a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
+++ b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
@@ -20,7 +20,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc ~x86"
+ KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc ~x86"
SRC_URI="
!binary? ( https://www.seabios.org/downloads/${P}.tar.gz )
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2021-06-28 1:35 Sam James
0 siblings, 0 replies; 59+ messages in thread
From: Sam James @ 2021-06-28 1:35 UTC (permalink / raw
To: gentoo-commits
commit: 12928006bf594fbb715f17be8b68daa2190b452f
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Mon Jun 28 01:35:38 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Mon Jun 28 01:35:38 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=12928006
sys-firmware/seabios: Stabilize 1.14.0-r2 x86, #798858
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-firmware/seabios/seabios-1.14.0-r2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
index 0f248ddfe81..94f3cb036c7 100644
--- a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
+++ b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
@@ -20,7 +20,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc ~x86"
+ KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc x86"
SRC_URI="
!binary? ( https://www.seabios.org/downloads/${P}.tar.gz )
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2021-06-28 1:36 Sam James
0 siblings, 0 replies; 59+ messages in thread
From: Sam James @ 2021-06-28 1:36 UTC (permalink / raw
To: gentoo-commits
commit: ae28e2356b8cb60892daeb782327a8c0119e55a2
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Mon Jun 28 01:36:30 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Mon Jun 28 01:36:30 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ae28e235
sys-firmware/seabios: Stabilize 1.14.0-r2 ppc, #798858
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-firmware/seabios/seabios-1.14.0-r2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
index 94f3cb036c7..1982195e9d1 100644
--- a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
+++ b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
@@ -20,7 +20,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc x86"
+ KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ~ppc64 ~s390 ~sparc x86"
SRC_URI="
!binary? ( https://www.seabios.org/downloads/${P}.tar.gz )
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2021-06-30 10:55 Agostino Sarubbo
0 siblings, 0 replies; 59+ messages in thread
From: Agostino Sarubbo @ 2021-06-30 10:55 UTC (permalink / raw
To: gentoo-commits
commit: 719835bfc763baef3112a3cc0427ccf18fa38b53
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Wed Jun 30 10:55:38 2021 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Wed Jun 30 10:55:38 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=719835bf
sys-firmware/seabios: ppc64 stable wrt bug #798858
Package-Manager: Portage-3.0.20, Repoman-3.0.2
RepoMan-Options: --include-arches="ppc64"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
sys-firmware/seabios/seabios-1.14.0-r2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
index 1982195e9d1..14f243acf1b 100644
--- a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
+++ b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
@@ -20,7 +20,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ~ppc64 ~s390 ~sparc x86"
+ KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~s390 ~sparc x86"
SRC_URI="
!binary? ( https://www.seabios.org/downloads/${P}.tar.gz )
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2021-07-12 22:38 Sam James
0 siblings, 0 replies; 59+ messages in thread
From: Sam James @ 2021-07-12 22:38 UTC (permalink / raw
To: gentoo-commits
commit: 8962ace8da894314bcb0a900bb43a13c089b0221
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Mon Jul 12 22:38:36 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Mon Jul 12 22:38:36 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=8962ace8
sys-firmware/seabios: Stabilize 1.14.0-r2 arm64, #798858
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-firmware/seabios/seabios-1.14.0-r2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
index 14f243acf1b..22c08e1b9be 100644
--- a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
+++ b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
@@ -20,7 +20,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~s390 ~sparc x86"
+ KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~s390 ~sparc x86"
SRC_URI="
!binary? ( https://www.seabios.org/downloads/${P}.tar.gz )
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2021-10-01 7:14 Sam James
0 siblings, 0 replies; 59+ messages in thread
From: Sam James @ 2021-10-01 7:14 UTC (permalink / raw
To: gentoo-commits
commit: 7842a77f8f6547e4ad684cb2dab9441e500d08ff
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Oct 1 07:12:37 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Oct 1 07:12:37 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=7842a77f
sys-firmware/seabios: update SRC_URI
slyfox@ has retired and I've archived the distfiles
in my devspace.
Package-Manager: Portage-3.0.26, Repoman-3.0.3
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-firmware/seabios/seabios-1.14.0-r2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
index 22c08e1b9be..37b8af0969c 100644
--- a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
+++ b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
@@ -24,7 +24,7 @@ else
SRC_URI="
!binary? ( https://www.seabios.org/downloads/${P}.tar.gz )
- binary? ( https://dev.gentoo.org/~slyfox/distfiles/${P}-r2-bin.tar.xz )"
+ binary? ( https://dev.gentoo.org/~sam/distfiles/${P}-r2-bin.tar.xz )"
fi
DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2022-01-04 12:37 Matthias Maier
0 siblings, 0 replies; 59+ messages in thread
From: Matthias Maier @ 2022-01-04 12:37 UTC (permalink / raw
To: gentoo-commits
commit: 3febca9f9f210b5ec74bffe1cb6bae4614fe1009
Author: Thomas Bettler <thomas.bettler <AT> gmail <DOT> com>
AuthorDate: Thu Dec 16 18:38:55 2021 +0000
Commit: Matthias Maier <tamiko <AT> gentoo <DOT> org>
CommitDate: Tue Jan 4 12:36:37 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=3febca9f
sys-firmware/seabios: add python 3.10
Closes: https://bugs.gentoo.org/829361
Closes: https://github.com/gentoo/gentoo/pull/23333
Signed-off-by: Thomas Bettler <thomas.bettler <AT> gmail.com>
Signed-off-by: Matthias Maier <tamiko <AT> gentoo.org>
sys-firmware/seabios/seabios-1.14.0-r1.ebuild | 2 +-
sys-firmware/seabios/seabios-1.14.0-r2.ebuild | 2 +-
sys-firmware/seabios/seabios-1.14.0.ebuild | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/sys-firmware/seabios/seabios-1.14.0-r1.ebuild b/sys-firmware/seabios/seabios-1.14.0-r1.ebuild
index f97b51857b56..92b326728a8d 100644
--- a/sys-firmware/seabios/seabios-1.14.0-r1.ebuild
+++ b/sys-firmware/seabios/seabios-1.14.0-r1.ebuild
@@ -3,7 +3,7 @@
EAPI="7"
-PYTHON_COMPAT=( python3_{7..9} )
+PYTHON_COMPAT=( python3_{8..10} )
inherit toolchain-funcs python-any-r1
diff --git a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
index 37b8af0969c1..059ac8e52daa 100644
--- a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
+++ b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
@@ -3,7 +3,7 @@
EAPI="7"
-PYTHON_COMPAT=( python3_{7..9} )
+PYTHON_COMPAT=( python3_{8..10} )
inherit toolchain-funcs python-any-r1
diff --git a/sys-firmware/seabios/seabios-1.14.0.ebuild b/sys-firmware/seabios/seabios-1.14.0.ebuild
index 0c4005c94f06..67cefdec6735 100644
--- a/sys-firmware/seabios/seabios-1.14.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.14.0.ebuild
@@ -3,7 +3,7 @@
EAPI="7"
-PYTHON_COMPAT=( python3_{7..9} )
+PYTHON_COMPAT=( python3_{8..10} )
inherit toolchain-funcs python-any-r1
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2022-01-23 8:05 Yixun Lan
0 siblings, 0 replies; 59+ messages in thread
From: Yixun Lan @ 2022-01-23 8:05 UTC (permalink / raw
To: gentoo-commits
commit: e637429cd61c190710cdfd14d5ca2e6b32bed784
Author: Yongxiang Liang <tanekliang <AT> gmail <DOT> com>
AuthorDate: Sun Jan 9 11:56:41 2022 +0000
Commit: Yixun Lan <dlan <AT> gentoo <DOT> org>
CommitDate: Sun Jan 23 08:04:40 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e637429c
sys-firmware/seabios: keyword ~riscv
Package-Manager: Portage-3.0.30, Repoman-3.0.3
Signed-off-by: Yongxiang Liang <tanekliang <AT> gmail.com>
Signed-off-by: Yixun Lan <dlan <AT> gentoo.org>
sys-firmware/seabios/seabios-1.14.0-r2.ebuild | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
index 059ac8e52daa..c2f9e6c7329b 100644
--- a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
+++ b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2021 Gentoo Authors
+# Copyright 1999-2022 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI="7"
@@ -20,7 +20,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~s390 ~sparc x86"
+ KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv ~s390 ~sparc x86"
SRC_URI="
!binary? ( https://www.seabios.org/downloads/${P}.tar.gz )
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2022-05-19 12:19 WANG Xuerui
0 siblings, 0 replies; 59+ messages in thread
From: WANG Xuerui @ 2022-05-19 12:19 UTC (permalink / raw
To: gentoo-commits
commit: 34fec750dd806a2df7d414e531544750b00f58a1
Author: WANG Xuerui <xen0n <AT> gentoo <DOT> org>
AuthorDate: Thu May 19 11:45:57 2022 +0000
Commit: WANG Xuerui <xen0n <AT> gentoo <DOT> org>
CommitDate: Thu May 19 12:18:13 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=34fec750
sys-firmware/seabios: keyword 1.14.0-r2 for ~loong
Signed-off-by: WANG Xuerui <xen0n <AT> gentoo.org>
sys-firmware/seabios/seabios-1.14.0-r2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
index c2f9e6c7329b..b9e722164d1c 100644
--- a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
+++ b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
@@ -20,7 +20,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
EGIT_REPO_URI="git://git.seabios.org/seabios.git"
inherit git-r3
else
- KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv ~s390 ~sparc x86"
+ KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 ~sparc x86"
SRC_URI="
!binary? ( https://www.seabios.org/downloads/${P}.tar.gz )
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2022-09-27 3:27 John Helmert III
0 siblings, 0 replies; 59+ messages in thread
From: John Helmert III @ 2022-09-27 3:27 UTC (permalink / raw
To: gentoo-commits
commit: 15e6691e58a3cce09189c38671b6f9db3b8fa659
Author: John Helmert III <ajak <AT> gentoo <DOT> org>
AuthorDate: Mon Sep 26 23:03:16 2022 +0000
Commit: John Helmert III <ajak <AT> gentoo <DOT> org>
CommitDate: Tue Sep 27 03:26:22 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=15e6691e
sys-firmware/seabios: keyword 1.16.0
Signed-off-by: John Helmert III <ajak <AT> gentoo.org>
sys-firmware/seabios/seabios-1.16.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.16.0.ebuild b/sys-firmware/seabios/seabios-1.16.0.ebuild
index 4ba443b19f0b..2948596f640b 100644
--- a/sys-firmware/seabios/seabios-1.16.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.16.0.ebuild
@@ -17,7 +17,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
inherit git-r3
else
SRC_URI="https://www.seabios.org/downloads/${P}.tar.gz"
- #KEYWORDS="~alpha ~amd64 ~arm64 ~loong ~m68k ~mips ~ppc ~ppc64 ~x86"
+ KEYWORDS="~alpha ~amd64 ~arm64 ~loong ~m68k ~mips ~ppc ~ppc64 ~x86"
fi
DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2022-09-27 3:27 John Helmert III
0 siblings, 0 replies; 59+ messages in thread
From: John Helmert III @ 2022-09-27 3:27 UTC (permalink / raw
To: gentoo-commits
commit: 44b2c98dd6c1897de85cbbb121a7d8b1fc626e85
Author: John Helmert III <ajak <AT> gentoo <DOT> org>
AuthorDate: Tue Sep 27 02:42:56 2022 +0000
Commit: John Helmert III <ajak <AT> gentoo <DOT> org>
CommitDate: Tue Sep 27 03:26:24 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=44b2c98d
sys-firmware/seabios: drop 1.12.0, 1.12.0-r1, 1.14.0, 1.14.0-r1
Signed-off-by: John Helmert III <ajak <AT> gentoo.org>
sys-firmware/seabios/Manifest | 3 -
sys-firmware/seabios/seabios-1.12.0-r1.ebuild | 171 -------------------------
sys-firmware/seabios/seabios-1.12.0.ebuild | 145 ----------------------
sys-firmware/seabios/seabios-1.14.0-r1.ebuild | 172 --------------------------
sys-firmware/seabios/seabios-1.14.0.ebuild | 166 -------------------------
5 files changed, 657 deletions(-)
diff --git a/sys-firmware/seabios/Manifest b/sys-firmware/seabios/Manifest
index 53fef7c53118..8eda39382f89 100644
--- a/sys-firmware/seabios/Manifest
+++ b/sys-firmware/seabios/Manifest
@@ -1,6 +1,3 @@
-DIST seabios-1.12.0-bin.tar.xz 162492 BLAKE2B 9a5a349226ed7efbed328493dc057e232203b251677a23f1f09c133743ff0ca6b05270c9d27460be1d8897888fe23ff7bdfa122023fa8ddb23af03d5b9b6f8dd SHA512 f7a0395d621245093bb9a278d95ecc3d4e8d23f620058cd4fddaf885c8b86256f6258f3fd8173c1d24c03306f44d180e768bf8005ee123bc4b699b9f0ca371be
-DIST seabios-1.12.0.tar.gz 613542 BLAKE2B f145c2db716996bfa9e5c014086ccfaa8ae96ebc158f34303b122b7bf209408c567665d8691364df8d8e886f63e0e72a3f3cd319dfa86ef581023201b5d94e53 SHA512 e52c5363e5bb37b5286e55545aa06bd126218f9d0e3a06ac2e189de68fe3de3256c11ca1bb13357a9c384d7e3af6284083ff3aa587688b5de04ef11b97bdfa27
-DIST seabios-1.14.0-bin.tar.xz 170160 BLAKE2B 1ab471ce0c6e27633ec42a66e3069496be84de713baab5de4f297821bd0da26404f7f70abc82e223ec5aa317a878889ae92b019988c72d24f77e7dcc5865f916 SHA512 7964e9bb7dff4fd6593f5d6d64efc4b1460750461b86635dbe5255d2086d619f51711d7a35e4dc20e556f705091c0950afabeddcd2e8876f05ce14f9ca73ed71
DIST seabios-1.14.0-r2-bin.tar.xz 132256 BLAKE2B 7d38949de254d6e3699d463a66c363156aa36bfe16c18bea48c55a61bdc423184175fd5427d3246a78d9c6335e61e5baa982f67e7406c5525e405b4383530d41 SHA512 5ce0e407b97e878842fbd7ad2f9e8a65f2565a5aa43d08e01cff024352780f55f8669958c58d20770db7f90e87cc52c860af831cefe3846227e7b45cd9dc33ee
DIST seabios-1.14.0.tar.gz 628985 BLAKE2B cc1126925dab1551a655680d20d06ebf28c12c386500d1ee4df9e1a99403b4c5bc6a66c2cc5ef58b4c3d6d7226f35007506a6a1855c2cf2742469dcb7aba05bb SHA512 215c42f59425f8abd062be7b11fc0e39c977cee5001a2381551b0f851ac337d0dd53c065267e6dee0e710ffd700fa635f9007b89da8dfce0f47122c984ee8146
DIST seabios-1.16.0.tar.gz 635419 BLAKE2B b645f20bae341d56ce4fc4a7044446050d8490c6c136377f6dccf02c88100b0644bc13d210b4a517a8be6002d5671b0fba77120a2aca3a9bafbad5e88d037e40 SHA512 9daefcfb1c9edda4462a4b080c9bac552154d577ae19703a914928e43005e7a52edd86869c6507e94a7f0c61ce8b3e6f5dea38cd5146628cb138a130947c522f
diff --git a/sys-firmware/seabios/seabios-1.12.0-r1.ebuild b/sys-firmware/seabios/seabios-1.12.0-r1.ebuild
deleted file mode 100644
index 03b9cd8cd76c..000000000000
--- a/sys-firmware/seabios/seabios-1.12.0-r1.ebuild
+++ /dev/null
@@ -1,171 +0,0 @@
-# Copyright 1999-2021 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="7"
-
-PYTHON_COMPAT=( python3_{7..9} )
-
-inherit toolchain-funcs python-any-r1
-
-# SeaBIOS maintainers sometimes don't release stable tarballs or stable
-# binaries to generate the stable tarball the following is necessary:
-# git clone git://git.seabios.org/seabios.git && cd seabios
-# git archive --output seabios-${PV}.tar.gz --prefix seabios-${PV}/ rel-${PV}
-
-if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
- EGIT_REPO_URI="git://git.seabios.org/seabios.git"
- inherit git-r3
-else
- KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc ~x86"
-
- # Binary versions taken from fedora:
- # http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/
- # seabios-bin-1.12.1-2.fc31.noarch.rpm
- # seavgabios-bin-1.12.1-2.fc31.noarch.rpm
- SRC_URI="
- !binary? ( https://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
- binary? ( https://dev.gentoo.org/~tamiko/distfiles/${P}-bin.tar.xz )"
-fi
-
-DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
-HOMEPAGE="https://www.seabios.org/"
-
-LICENSE="LGPL-3 GPL-3"
-SLOT="0"
-IUSE="+binary debug +seavgabios"
-
-REQUIRED_USE="debug? ( !binary )"
-
-SOURCE_DEPEND="
- >=sys-power/iasl-20060912
- ${PYTHON_DEPS}"
-DEPEND="
- !binary? (
- ${SOURCE_DEPEND}
- )"
-RDEPEND=""
-
-choose_target_chost() {
- if [[ -n "${CC}" ]]; then
- ${CC} -dumpmachine
- return
- fi
-
- if use amd64 || use x86; then
- # Use the native compiler
- echo "${CHOST}"
- return
- fi
-
- local i
- for i in x86_64 i686 i586 i486 i386 ; do
- i=${i}-pc-linux-gnu
- type -P ${i}-gcc > /dev/null && echo ${i} && return
- done
-}
-
-pkg_pretend() {
- if ! use binary; then
- ewarn "You have decided to compile your own SeaBIOS. This is not"
- ewarn "supported by upstream unless you use their recommended"
- ewarn "toolchain (which you are not)."
- elog
- ewarn "If you are intending to use this build with QEMU, realize"
- ewarn "you will not receive any support if you have compiled your"
- ewarn "own SeaBIOS. Virtual machines subtly fail based on changes"
- ewarn "in SeaBIOS."
- if [[ -z "$(choose_target_chost)" ]]; then
- elog
- eerror "Before you can compile ${PN}[-binary], you need to install a x86 cross-compiler"
- eerror "Run the following commands:"
- eerror " emerge crossdev"
- eerror " crossdev --stable -t x86_64-pc-linux-gnu"
- die "cross-compiler is needed"
- fi
- fi
-}
-
-pkg_setup() {
- use binary || python-any-r1_pkg_setup
-}
-
-src_unpack() {
- default
-
- # This simplifies the logic between binary & source builds.
- mkdir -p "${S}"
-}
-
-src_prepare() {
- default
-
- # Ensure precompiled iasl files are never used
- find "${WORKDIR}" -name '*.hex' -delete || die
-}
-
-src_configure() {
- use binary && return
-
- tc-ld-disable-gold #438058
-
- if use debug ; then
- echo "CONFIG_DEBUG_LEVEL=8" >.config
- fi
- _emake config
-}
-
-_emake() {
- LANG=C \
- emake V=1 \
- CC="$(tc-getCC)" \
- LD="$(tc-getLD)" \
- AR="$(tc-getAR)" \
- AS="$(tc-getAS)" \
- OBJCOPY="$(tc-getOBJCOPY)" \
- RANLIB="$(tc-getRANLIB)" \
- OBJDUMP="$(tc-getOBJDUMP)" \
- HOST_CC="$(tc-getBUILD_CC)" \
- VERSION="Gentoo/${EGIT_COMMIT:-${PVR}}" \
- "$@"
-}
-
-src_compile() {
- use binary && return
-
- local TARGET_CHOST=$(choose_target_chost)
-
- cp "${FILESDIR}/seabios/config.seabios-256k" .config || die
- _emake oldnoconfig
- CHOST="${TARGET_CHOST}" _emake iasl
- CHOST="${TARGET_CHOST}" _emake out/bios.bin
- mv out/bios.bin ../bios-256k.bin || die
-
- if use seavgabios ; then
- local config t targets=(
- cirrus
- isavga
- qxl
- stdvga
- virtio
- vmware
- )
- for t in "${targets[@]}" ; do
- emake clean distclean
- cp "${FILESDIR}/seavgabios/config.vga-${t}" .config || die
- _emake oldnoconfig
- CHOST="${TARGET_CHOST}" _emake out/vgabios.bin
- cp out/vgabios.bin ../vgabios-${t}.bin || die
- done
- fi
-}
-
-src_install() {
- insinto /usr/share/seabios
- use binary && doins ../bios.bin
- doins ../bios-256k.bin
-
- if use seavgabios ; then
- insinto /usr/share/seavgabios
- doins ../vgabios*.bin
- fi
-}
diff --git a/sys-firmware/seabios/seabios-1.12.0.ebuild b/sys-firmware/seabios/seabios-1.12.0.ebuild
deleted file mode 100644
index 375070e32da8..000000000000
--- a/sys-firmware/seabios/seabios-1.12.0.ebuild
+++ /dev/null
@@ -1,145 +0,0 @@
-# Copyright 1999-2021 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="7"
-
-PYTHON_COMPAT=( python3_{7..9} )
-
-inherit toolchain-funcs python-any-r1
-
-# SeaBIOS maintainers sometimes don't release stable tarballs or stable
-# binaries to generate the stable tarball the following is necessary:
-# git clone git://git.seabios.org/seabios.git && cd seabios
-# git archive --output seabios-${PV}.tar.gz --prefix seabios-${PV}/ rel-${PV}
-
-if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
- EGIT_REPO_URI="git://git.seabios.org/seabios.git"
- inherit git-r3
-else
- KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~s390 ~sparc x86"
-
- # Binary versions taken from fedora:
- # http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/
- # seabios-bin-1.12.1-2.fc31.noarch.rpm
- # seavgabios-bin-1.12.1-2.fc31.noarch.rpm
- SRC_URI="
- !binary? ( https://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz )
- binary? ( https://dev.gentoo.org/~tamiko/distfiles/${P}-bin.tar.xz )"
-fi
-
-DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
-HOMEPAGE="https://www.seabios.org/"
-
-LICENSE="LGPL-3 GPL-3"
-SLOT="0"
-IUSE="+binary debug +seavgabios"
-
-REQUIRED_USE="debug? ( !binary )
- !amd64? ( !x86? ( binary ) )"
-
-# The amd64/x86 check is needed to workaround #570892.
-SOURCE_DEPEND="
- >=sys-power/iasl-20060912
- ${PYTHON_DEPS}"
-DEPEND="
- !binary? (
- amd64? ( ${SOURCE_DEPEND} )
- x86? ( ${SOURCE_DEPEND} )
- )"
-RDEPEND=""
-
-pkg_pretend() {
- if ! use binary; then
- ewarn "You have decided to compile your own SeaBIOS. This is not"
- ewarn "supported by upstream unless you use their recommended"
- ewarn "toolchain (which you are not)."
- elog
- ewarn "If you are intending to use this build with QEMU, realize"
- ewarn "you will not receive any support if you have compiled your"
- ewarn "own SeaBIOS. Virtual machines subtly fail based on changes"
- ewarn "in SeaBIOS."
- fi
-}
-
-pkg_setup() {
- use binary || python-any-r1_pkg_setup
-}
-
-src_unpack() {
- default
-
- # This simplifies the logic between binary & source builds.
- mkdir -p "${S}"
-}
-
-src_prepare() {
- default
-
- # Ensure precompiled iasl files are never used
- find "${WORKDIR}" -name '*.hex' -delete || die
-}
-
-src_configure() {
- use binary && return
-
- tc-ld-disable-gold #438058
-
- if use debug ; then
- echo "CONFIG_DEBUG_LEVEL=8" >.config
- fi
- _emake config
-}
-
-_emake() {
- LANG=C \
- emake V=1 \
- CC="$(tc-getCC)" \
- LD="$(tc-getLD)" \
- AR="$(tc-getAR)" \
- AS="$(tc-getAS)" \
- OBJCOPY="$(tc-getOBJCOPY)" \
- RANLIB="$(tc-getRANLIB)" \
- OBJDUMP="$(tc-getOBJDUMP)" \
- HOST_CC="$(tc-getBUILD_CC)" \
- VERSION="Gentoo/${EGIT_COMMIT:-${PVR}}" \
- "$@"
-}
-
-src_compile() {
- use binary && return
-
- cp "${FILESDIR}/seabios/config.seabios-256k" .config || die
- _emake oldnoconfig
- _emake iasl
- _emake out/bios.bin
- mv out/bios.bin ../bios-256k.bin || die
-
- if use seavgabios ; then
- local config t targets=(
- cirrus
- isavga
- qxl
- stdvga
- virtio
- vmware
- )
- for t in "${targets[@]}" ; do
- emake clean distclean
- cp "${FILESDIR}/seavgabios/config.vga-${t}" .config || die
- _emake oldnoconfig
- _emake out/vgabios.bin
- cp out/vgabios.bin ../vgabios-${t}.bin || die
- done
- fi
-}
-
-src_install() {
- insinto /usr/share/seabios
- use binary && doins ../bios.bin
- doins ../bios-256k.bin
-
- if use seavgabios ; then
- insinto /usr/share/seavgabios
- doins ../vgabios*.bin
- fi
-}
diff --git a/sys-firmware/seabios/seabios-1.14.0-r1.ebuild b/sys-firmware/seabios/seabios-1.14.0-r1.ebuild
deleted file mode 100644
index 92b326728a8d..000000000000
--- a/sys-firmware/seabios/seabios-1.14.0-r1.ebuild
+++ /dev/null
@@ -1,172 +0,0 @@
-# Copyright 1999-2021 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="7"
-
-PYTHON_COMPAT=( python3_{8..10} )
-
-inherit toolchain-funcs python-any-r1
-
-# SeaBIOS maintainers sometimes don't release stable tarballs or stable
-# binaries to generate the stable tarball the following is necessary:
-# git clone git://git.seabios.org/seabios.git && cd seabios
-# git archive --output seabios-${PV}.tar.gz --prefix seabios-${PV}/ rel-${PV}
-
-if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
- EGIT_REPO_URI="git://git.seabios.org/seabios.git"
- inherit git-r3
-else
- KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc ~x86"
-
- SRC_URI="
- !binary? ( https://www.seabios.org/downloads/${P}.tar.gz )
- binary? ( https://dev.gentoo.org/~tamiko/distfiles/${P}-bin.tar.xz )"
-fi
-
-DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
-HOMEPAGE="https://www.seabios.org/"
-
-LICENSE="LGPL-3 GPL-3"
-SLOT="0"
-IUSE="+binary debug +seavgabios"
-
-REQUIRED_USE="debug? ( !binary )"
-
-SOURCE_DEPEND="
- >=sys-power/iasl-20060912
- ${PYTHON_DEPS}"
-DEPEND="
- !binary? (
- ${SOURCE_DEPEND}
- )"
-RDEPEND=""
-
-choose_target_chost() {
- if [[ -n "${CC}" ]]; then
- ${CC} -dumpmachine
- return
- fi
-
- if use amd64 || use x86; then
- # Use the native compiler
- echo "${CHOST}"
- return
- fi
-
- local i
- for i in x86_64 i686 i586 i486 i386 ; do
- i=${i}-pc-linux-gnu
- type -P ${i}-gcc > /dev/null && echo ${i} && return
- done
-}
-
-pkg_pretend() {
- if ! use binary; then
- ewarn "You have decided to compile your own SeaBIOS. This is not"
- ewarn "supported by upstream unless you use their recommended"
- ewarn "toolchain (which you are not)."
- elog
- ewarn "If you are intending to use this build with QEMU, realize"
- ewarn "you will not receive any support if you have compiled your"
- ewarn "own SeaBIOS. Virtual machines subtly fail based on changes"
- ewarn "in SeaBIOS."
- if [[ -z "$(choose_target_chost)" ]]; then
- elog
- eerror "Before you can compile ${PN}[-binary], you need to install a x86 cross-compiler"
- eerror "Run the following commands:"
- eerror " emerge crossdev"
- eerror " crossdev --stable -t x86_64-pc-linux-gnu"
- die "cross-compiler is needed"
- fi
- fi
-}
-
-pkg_setup() {
- use binary || python-any-r1_pkg_setup
-}
-
-src_unpack() {
- default
-
- # This simplifies the logic between binary & source builds.
- mkdir -p "${S}"
-}
-
-src_prepare() {
- default
-
- if ! use binary; then
- eapply "${FILESDIR}"/${PN}-1.14.0-binutils-2.36.patch
- fi
-
- # Ensure precompiled iasl files are never used
- find "${WORKDIR}" -name '*.hex' -delete || die
-}
-
-src_configure() {
- use binary && return
-
- tc-ld-disable-gold #438058
-
- if use debug ; then
- echo "CONFIG_DEBUG_LEVEL=8" >.config
- fi
- _emake config
-}
-
-_emake() {
- LANG=C \
- emake V=1 \
- CPP="$(tc-getPROG CPP cpp)" \
- CC="$(tc-getCC)" \
- LD="$(tc-getLD)" \
- AR="$(tc-getAR)" \
- AS="$(tc-getAS)" \
- OBJCOPY="$(tc-getOBJCOPY)" \
- RANLIB="$(tc-getRANLIB)" \
- OBJDUMP="$(tc-getOBJDUMP)" \
- STRIP="$(tc-getSTRIP)" \
- HOST_CC="$(tc-getBUILD_CC)" \
- VERSION="Gentoo/${EGIT_COMMIT:-${PVR}}" \
- "$@"
-}
-
-src_compile() {
- use binary && return
-
- local TARGET_CHOST=$(choose_target_chost)
-
- cp "${FILESDIR}/seabios/config.seabios-256k" .config || die
- _emake oldnoconfig
- CHOST="${TARGET_CHOST}" _emake iasl
- CHOST="${TARGET_CHOST}" _emake out/bios.bin
- mv out/bios.bin ../bios-256k.bin || die
-
- if use seavgabios ; then
- local config t targets=(
- cirrus
- isavga
- qxl
- stdvga
- virtio
- vmware
- )
- for t in "${targets[@]}" ; do
- _emake clean distclean
- cp "${FILESDIR}/seavgabios/config.vga-${t}" .config || die
- _emake oldnoconfig
- CHOST="${TARGET_CHOST}" _emake out/vgabios.bin
- cp out/vgabios.bin ../vgabios-${t}.bin || die
- done
- fi
-}
-
-src_install() {
- insinto /usr/share/seabios
- doins ../bios-256k.bin
-
- if use seavgabios ; then
- insinto /usr/share/seavgabios
- doins ../vgabios*.bin
- fi
-}
diff --git a/sys-firmware/seabios/seabios-1.14.0.ebuild b/sys-firmware/seabios/seabios-1.14.0.ebuild
deleted file mode 100644
index 67cefdec6735..000000000000
--- a/sys-firmware/seabios/seabios-1.14.0.ebuild
+++ /dev/null
@@ -1,166 +0,0 @@
-# Copyright 1999-2021 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="7"
-
-PYTHON_COMPAT=( python3_{8..10} )
-
-inherit toolchain-funcs python-any-r1
-
-# SeaBIOS maintainers sometimes don't release stable tarballs or stable
-# binaries to generate the stable tarball the following is necessary:
-# git clone git://git.seabios.org/seabios.git && cd seabios
-# git archive --output seabios-${PV}.tar.gz --prefix seabios-${PV}/ rel-${PV}
-
-if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
- EGIT_REPO_URI="git://git.seabios.org/seabios.git"
- inherit git-r3
-else
- KEYWORDS="~alpha amd64 ~arm arm64 ~hppa ~ia64 ~m68k ~mips ppc ppc64 ~s390 ~sparc x86"
-
- SRC_URI="
- !binary? ( https://www.seabios.org/downloads/${P}.tar.gz )
- binary? ( https://dev.gentoo.org/~tamiko/distfiles/${P}-bin.tar.xz )"
-fi
-
-DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
-HOMEPAGE="https://www.seabios.org/"
-
-LICENSE="LGPL-3 GPL-3"
-SLOT="0"
-IUSE="+binary debug +seavgabios"
-
-REQUIRED_USE="debug? ( !binary )"
-
-SOURCE_DEPEND="
- >=sys-power/iasl-20060912
- ${PYTHON_DEPS}"
-DEPEND="
- !binary? (
- ${SOURCE_DEPEND}
- )"
-RDEPEND=""
-
-choose_target_chost() {
- if [[ -n "${CC}" ]]; then
- ${CC} -dumpmachine
- return
- fi
-
- if use amd64 || use x86; then
- # Use the native compiler
- echo "${CHOST}"
- return
- fi
-
- local i
- for i in x86_64 i686 i586 i486 i386 ; do
- i=${i}-pc-linux-gnu
- type -P ${i}-gcc > /dev/null && echo ${i} && return
- done
-}
-
-pkg_pretend() {
- if ! use binary; then
- ewarn "You have decided to compile your own SeaBIOS. This is not"
- ewarn "supported by upstream unless you use their recommended"
- ewarn "toolchain (which you are not)."
- elog
- ewarn "If you are intending to use this build with QEMU, realize"
- ewarn "you will not receive any support if you have compiled your"
- ewarn "own SeaBIOS. Virtual machines subtly fail based on changes"
- ewarn "in SeaBIOS."
- if [[ -z "$(choose_target_chost)" ]]; then
- elog
- eerror "Before you can compile ${PN}[-binary], you need to install a x86 cross-compiler"
- eerror "Run the following commands:"
- eerror " emerge crossdev"
- eerror " crossdev --stable -t x86_64-pc-linux-gnu"
- die "cross-compiler is needed"
- fi
- fi
-}
-
-pkg_setup() {
- use binary || python-any-r1_pkg_setup
-}
-
-src_unpack() {
- default
-
- # This simplifies the logic between binary & source builds.
- mkdir -p "${S}"
-}
-
-src_prepare() {
- default
-
- # Ensure precompiled iasl files are never used
- find "${WORKDIR}" -name '*.hex' -delete || die
-}
-
-src_configure() {
- use binary && return
-
- tc-ld-disable-gold #438058
-
- if use debug ; then
- echo "CONFIG_DEBUG_LEVEL=8" >.config
- fi
- _emake config
-}
-
-_emake() {
- LANG=C \
- emake V=1 \
- CC="$(tc-getCC)" \
- LD="$(tc-getLD)" \
- AR="$(tc-getAR)" \
- AS="$(tc-getAS)" \
- OBJCOPY="$(tc-getOBJCOPY)" \
- RANLIB="$(tc-getRANLIB)" \
- OBJDUMP="$(tc-getOBJDUMP)" \
- HOST_CC="$(tc-getBUILD_CC)" \
- VERSION="Gentoo/${EGIT_COMMIT:-${PVR}}" \
- "$@"
-}
-
-src_compile() {
- use binary && return
-
- local TARGET_CHOST=$(choose_target_chost)
-
- cp "${FILESDIR}/seabios/config.seabios-256k" .config || die
- _emake oldnoconfig
- CHOST="${TARGET_CHOST}" _emake iasl
- CHOST="${TARGET_CHOST}" _emake out/bios.bin
- mv out/bios.bin ../bios-256k.bin || die
-
- if use seavgabios ; then
- local config t targets=(
- cirrus
- isavga
- qxl
- stdvga
- virtio
- vmware
- )
- for t in "${targets[@]}" ; do
- emake clean distclean
- cp "${FILESDIR}/seavgabios/config.vga-${t}" .config || die
- _emake oldnoconfig
- CHOST="${TARGET_CHOST}" _emake out/vgabios.bin
- cp out/vgabios.bin ../vgabios-${t}.bin || die
- done
- fi
-}
-
-src_install() {
- insinto /usr/share/seabios
- doins ../bios-256k.bin
-
- if use seavgabios ; then
- insinto /usr/share/seavgabios
- doins ../vgabios*.bin
- fi
-}
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2022-09-27 3:27 John Helmert III
0 siblings, 0 replies; 59+ messages in thread
From: John Helmert III @ 2022-09-27 3:27 UTC (permalink / raw
To: gentoo-commits
commit: f57980c18442d7432872d82fc632bf63f6ade001
Author: John Helmert III <ajak <AT> gentoo <DOT> org>
AuthorDate: Tue Sep 27 01:44:43 2022 +0000
Commit: John Helmert III <ajak <AT> gentoo <DOT> org>
CommitDate: Tue Sep 27 03:26:24 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=f57980c1
sys-firmware/seabios: enable py3.11
Signed-off-by: John Helmert III <ajak <AT> gentoo.org>
sys-firmware/seabios/seabios-1.14.0-r2.ebuild | 2 +-
sys-firmware/seabios/seabios-1.16.0.ebuild | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
index b9e722164d1c..20707bc4b7c0 100644
--- a/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
+++ b/sys-firmware/seabios/seabios-1.14.0-r2.ebuild
@@ -3,7 +3,7 @@
EAPI="7"
-PYTHON_COMPAT=( python3_{8..10} )
+PYTHON_COMPAT=( python3_{8,9,10,11} )
inherit toolchain-funcs python-any-r1
diff --git a/sys-firmware/seabios/seabios-1.16.0.ebuild b/sys-firmware/seabios/seabios-1.16.0.ebuild
index 2948596f640b..b6dc35043258 100644
--- a/sys-firmware/seabios/seabios-1.16.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.16.0.ebuild
@@ -3,7 +3,7 @@
EAPI=8
-PYTHON_COMPAT=( python3_{8..10} )
+PYTHON_COMPAT=( python3_{8,9,10,11} )
inherit toolchain-funcs python-any-r1
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2022-12-02 18:50 Arthur Zamarin
0 siblings, 0 replies; 59+ messages in thread
From: Arthur Zamarin @ 2022-12-02 18:50 UTC (permalink / raw
To: gentoo-commits
commit: d17e1c273a8b60a9a62a63a75c8fb404d6619d5c
Author: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
AuthorDate: Fri Dec 2 18:49:20 2022 +0000
Commit: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
CommitDate: Fri Dec 2 18:49:20 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d17e1c27
sys-firmware/seabios: Stabilize 1.16.0 x86, #883695
Signed-off-by: Arthur Zamarin <arthurzam <AT> gentoo.org>
sys-firmware/seabios/seabios-1.16.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.16.0.ebuild b/sys-firmware/seabios/seabios-1.16.0.ebuild
index b6dc35043258..334ee81327e0 100644
--- a/sys-firmware/seabios/seabios-1.16.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.16.0.ebuild
@@ -17,7 +17,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
inherit git-r3
else
SRC_URI="https://www.seabios.org/downloads/${P}.tar.gz"
- KEYWORDS="~alpha ~amd64 ~arm64 ~loong ~m68k ~mips ~ppc ~ppc64 ~x86"
+ KEYWORDS="~alpha ~amd64 ~arm64 ~loong ~m68k ~mips ~ppc ~ppc64 x86"
fi
DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2022-12-02 18:50 Arthur Zamarin
0 siblings, 0 replies; 59+ messages in thread
From: Arthur Zamarin @ 2022-12-02 18:50 UTC (permalink / raw
To: gentoo-commits
commit: f063490ee2e8effd36211d6c37456eb86faedf17
Author: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
AuthorDate: Fri Dec 2 18:49:59 2022 +0000
Commit: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
CommitDate: Fri Dec 2 18:49:59 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=f063490e
sys-firmware/seabios: Stabilize 1.16.0 arm64, #883695
Signed-off-by: Arthur Zamarin <arthurzam <AT> gentoo.org>
sys-firmware/seabios/seabios-1.16.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.16.0.ebuild b/sys-firmware/seabios/seabios-1.16.0.ebuild
index 334ee81327e0..b7ec0a29b780 100644
--- a/sys-firmware/seabios/seabios-1.16.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.16.0.ebuild
@@ -17,7 +17,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
inherit git-r3
else
SRC_URI="https://www.seabios.org/downloads/${P}.tar.gz"
- KEYWORDS="~alpha ~amd64 ~arm64 ~loong ~m68k ~mips ~ppc ~ppc64 x86"
+ KEYWORDS="~alpha ~amd64 arm64 ~loong ~m68k ~mips ~ppc ~ppc64 x86"
fi
DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2022-12-02 19:27 Arthur Zamarin
0 siblings, 0 replies; 59+ messages in thread
From: Arthur Zamarin @ 2022-12-02 19:27 UTC (permalink / raw
To: gentoo-commits
commit: e351e041b80df1f40244de7a703b495bc72e3fe7
Author: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
AuthorDate: Fri Dec 2 19:26:57 2022 +0000
Commit: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
CommitDate: Fri Dec 2 19:26:57 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e351e041
sys-firmware/seabios: Stabilize 1.16.0 ppc64, #883695
Signed-off-by: Arthur Zamarin <arthurzam <AT> gentoo.org>
sys-firmware/seabios/seabios-1.16.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.16.0.ebuild b/sys-firmware/seabios/seabios-1.16.0.ebuild
index b7ec0a29b780..dfc37a26ab55 100644
--- a/sys-firmware/seabios/seabios-1.16.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.16.0.ebuild
@@ -17,7 +17,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
inherit git-r3
else
SRC_URI="https://www.seabios.org/downloads/${P}.tar.gz"
- KEYWORDS="~alpha ~amd64 arm64 ~loong ~m68k ~mips ~ppc ~ppc64 x86"
+ KEYWORDS="~alpha ~amd64 arm64 ~loong ~m68k ~mips ~ppc ppc64 x86"
fi
DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2022-12-05 19:48 Arthur Zamarin
0 siblings, 0 replies; 59+ messages in thread
From: Arthur Zamarin @ 2022-12-05 19:48 UTC (permalink / raw
To: gentoo-commits
commit: a08e68bd1884ec31ca3d67b47ec93fa199f91558
Author: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
AuthorDate: Mon Dec 5 19:47:37 2022 +0000
Commit: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
CommitDate: Mon Dec 5 19:47:37 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a08e68bd
sys-firmware/seabios: Stabilize 1.16.0 amd64, #883695
Signed-off-by: Arthur Zamarin <arthurzam <AT> gentoo.org>
sys-firmware/seabios/seabios-1.16.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.16.0.ebuild b/sys-firmware/seabios/seabios-1.16.0.ebuild
index dfc37a26ab55..b4829aafcfdc 100644
--- a/sys-firmware/seabios/seabios-1.16.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.16.0.ebuild
@@ -17,7 +17,7 @@ if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
inherit git-r3
else
SRC_URI="https://www.seabios.org/downloads/${P}.tar.gz"
- KEYWORDS="~alpha ~amd64 arm64 ~loong ~m68k ~mips ~ppc ppc64 x86"
+ KEYWORDS="~alpha amd64 arm64 ~loong ~m68k ~mips ~ppc ppc64 x86"
fi
DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2024-07-03 21:08 Matthias Maier
0 siblings, 0 replies; 59+ messages in thread
From: Matthias Maier @ 2024-07-03 21:08 UTC (permalink / raw
To: gentoo-commits
commit: 39cb663e24fadd9f539f4980434de9ee1f5bfaea
Author: Matthias Maier <tamiko <AT> gentoo <DOT> org>
AuthorDate: Wed Jul 3 21:08:08 2024 +0000
Commit: Matthias Maier <tamiko <AT> gentoo <DOT> org>
CommitDate: Wed Jul 3 21:08:08 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=39cb663e
sys-firmware/seabios: drop myself as a maintainer
Signed-off-by: Matthias Maier <tamiko <AT> gentoo.org>
sys-firmware/seabios/metadata.xml | 4 ----
1 file changed, 4 deletions(-)
diff --git a/sys-firmware/seabios/metadata.xml b/sys-firmware/seabios/metadata.xml
index f9cd49bf838c..4ecb14b934ba 100644
--- a/sys-firmware/seabios/metadata.xml
+++ b/sys-firmware/seabios/metadata.xml
@@ -1,10 +1,6 @@
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE pkgmetadata SYSTEM "https://www.gentoo.org/dtd/metadata.dtd">
<pkgmetadata>
- <maintainer type="person">
- <email>tamiko@gentoo.org</email>
- <name>Matthias Maier</name>
- </maintainer>
<maintainer type="project">
<email>virtualization@gentoo.org</email>
<name>Gentoo Virtualization Project</name>
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2024-07-31 9:24 Pacho Ramos
0 siblings, 0 replies; 59+ messages in thread
From: Pacho Ramos @ 2024-07-31 9:24 UTC (permalink / raw
To: gentoo-commits
commit: d90a2ba4c937ea55ed9289199f206799c33413ab
Author: Pacho Ramos <pacho <AT> gentoo <DOT> org>
AuthorDate: Wed Jul 31 08:59:33 2024 +0000
Commit: Pacho Ramos <pacho <AT> gentoo <DOT> org>
CommitDate: Wed Jul 31 09:23:09 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d90a2ba4
sys-firmware/seabios: enable py3.12
Closes: https://bugs.gentoo.org/929840
Signed-off-by: Pacho Ramos <pacho <AT> gentoo.org>
sys-firmware/seabios/seabios-1.16.0.ebuild | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-firmware/seabios/seabios-1.16.0.ebuild b/sys-firmware/seabios/seabios-1.16.0.ebuild
index 6399287a3bf3..ac5f71a088cd 100644
--- a/sys-firmware/seabios/seabios-1.16.0.ebuild
+++ b/sys-firmware/seabios/seabios-1.16.0.ebuild
@@ -1,9 +1,9 @@
-# Copyright 1999-2023 Gentoo Authors
+# Copyright 1999-2024 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=8
-PYTHON_COMPAT=( python3_{9,10,11} )
+PYTHON_COMPAT=( python3_{10..12} )
inherit toolchain-funcs python-any-r1
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2024-09-10 11:30 James Le Cuirot
0 siblings, 0 replies; 59+ messages in thread
From: James Le Cuirot @ 2024-09-10 11:30 UTC (permalink / raw
To: gentoo-commits
commit: 170a9bba6640fc6eb6753862245e28b17d217f6e
Author: James Le Cuirot <chewi <AT> gentoo <DOT> org>
AuthorDate: Tue Sep 10 10:36:56 2024 +0000
Commit: James Le Cuirot <chewi <AT> gentoo <DOT> org>
CommitDate: Tue Sep 10 11:30:18 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=170a9bba
sys-firmware/seabios: Soften the warning about building from source
This was written over 10 years ago, and we do build our own -bin package
with the regular Gentoo toolchain. Upstream does not give any such
warning, at least in https://www.seabios.org/Build_overview.
Signed-off-by: James Le Cuirot <chewi <AT> gentoo.org>
sys-firmware/seabios/seabios-1.16.3.ebuild | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/sys-firmware/seabios/seabios-1.16.3.ebuild b/sys-firmware/seabios/seabios-1.16.3.ebuild
index eaaa72c37fa1..7fd2fd755950 100644
--- a/sys-firmware/seabios/seabios-1.16.3.ebuild
+++ b/sys-firmware/seabios/seabios-1.16.3.ebuild
@@ -52,14 +52,10 @@ choose_target_chost() {
}
pkg_pretend() {
- ewarn "You have decided to compile your own SeaBIOS. This is not"
- ewarn "supported by upstream unless you use their recommended"
- ewarn "toolchain (which you are not)."
- elog
- ewarn "If you are intending to use this build with QEMU, realize"
- ewarn "you will not receive any support if you have compiled your"
- ewarn "own SeaBIOS. Virtual machines subtly fail based on changes"
- ewarn "in SeaBIOS."
+ ewarn "You have decided to compile your own SeaBIOS. This may cause subtle"
+ ewarn "failures at runtime. Please try sys-firmware/seabios-bin before"
+ ewarn "requesting support from Gentoo or upstream."
+
if [[ -z "$(choose_target_chost)" ]]; then
elog
eerror "Before you can compile ${PN}, you need to install a x86 cross-compiler"
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2024-09-10 11:30 James Le Cuirot
0 siblings, 0 replies; 59+ messages in thread
From: James Le Cuirot @ 2024-09-10 11:30 UTC (permalink / raw
To: gentoo-commits
commit: bf6863f3e63d0721003bb1199230e3ee8f87a414
Author: James Le Cuirot <chewi <AT> gentoo <DOT> org>
AuthorDate: Tue Sep 10 11:24:48 2024 +0000
Commit: James Le Cuirot <chewi <AT> gentoo <DOT> org>
CommitDate: Tue Sep 10 11:30:28 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=bf6863f3
sys-firmware/seabios: Bump Python to 3.13
Signed-off-by: James Le Cuirot <chewi <AT> gentoo.org>
sys-firmware/seabios/seabios-1.16.3.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.16.3.ebuild b/sys-firmware/seabios/seabios-1.16.3.ebuild
index 7fd2fd755950..5e3eefbb46f8 100644
--- a/sys-firmware/seabios/seabios-1.16.3.ebuild
+++ b/sys-firmware/seabios/seabios-1.16.3.ebuild
@@ -3,7 +3,7 @@
EAPI=8
-PYTHON_COMPAT=( python3_{10..12} )
+PYTHON_COMPAT=( python3_{10..13} )
inherit toolchain-funcs python-any-r1
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2024-09-10 11:30 James Le Cuirot
0 siblings, 0 replies; 59+ messages in thread
From: James Le Cuirot @ 2024-09-10 11:30 UTC (permalink / raw
To: gentoo-commits
commit: cfcbbb8b65b937fc5a04a2d213158674758adb6a
Author: Chris Mayo <aklhfex <AT> gmail <DOT> com>
AuthorDate: Sun Sep 1 18:24:03 2024 +0000
Commit: James Le Cuirot <chewi <AT> gentoo <DOT> org>
CommitDate: Tue Sep 10 11:30:15 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=cfcbbb8b
sys-firmware/seabios: add 1.16.3
Bug: https://bugs.gentoo.org/933284
Signed-off-by: Chris Mayo <aklhfex <AT> gmail.com>
Closes: https://github.com/gentoo/gentoo/pull/38372
Signed-off-by: James Le Cuirot <chewi <AT> gentoo.org>
sys-firmware/seabios/Manifest | 1 +
sys-firmware/seabios/seabios-1.16.3.ebuild | 142 +++++++++++++++++++++++++++++
2 files changed, 143 insertions(+)
diff --git a/sys-firmware/seabios/Manifest b/sys-firmware/seabios/Manifest
index 8eda39382f89..debc5efd5e00 100644
--- a/sys-firmware/seabios/Manifest
+++ b/sys-firmware/seabios/Manifest
@@ -1,3 +1,4 @@
DIST seabios-1.14.0-r2-bin.tar.xz 132256 BLAKE2B 7d38949de254d6e3699d463a66c363156aa36bfe16c18bea48c55a61bdc423184175fd5427d3246a78d9c6335e61e5baa982f67e7406c5525e405b4383530d41 SHA512 5ce0e407b97e878842fbd7ad2f9e8a65f2565a5aa43d08e01cff024352780f55f8669958c58d20770db7f90e87cc52c860af831cefe3846227e7b45cd9dc33ee
DIST seabios-1.14.0.tar.gz 628985 BLAKE2B cc1126925dab1551a655680d20d06ebf28c12c386500d1ee4df9e1a99403b4c5bc6a66c2cc5ef58b4c3d6d7226f35007506a6a1855c2cf2742469dcb7aba05bb SHA512 215c42f59425f8abd062be7b11fc0e39c977cee5001a2381551b0f851ac337d0dd53c065267e6dee0e710ffd700fa635f9007b89da8dfce0f47122c984ee8146
DIST seabios-1.16.0.tar.gz 635419 BLAKE2B b645f20bae341d56ce4fc4a7044446050d8490c6c136377f6dccf02c88100b0644bc13d210b4a517a8be6002d5671b0fba77120a2aca3a9bafbad5e88d037e40 SHA512 9daefcfb1c9edda4462a4b080c9bac552154d577ae19703a914928e43005e7a52edd86869c6507e94a7f0c61ce8b3e6f5dea38cd5146628cb138a130947c522f
+DIST seabios-1.16.3.tar.gz 637076 BLAKE2B 8b7c574bf8b0d3b02ea3127dabacda5ddc39c159f17a3a474b76ca79f3ec637ed5571f0d485712b5f9dc68d46db5b2b2c1e018ff63ae0206ca6354bccb714c6c SHA512 103aac0a7a890a681edb8950fee72d419899e20e8b06e2dd382987f98d3faf362789fca5aa4efabe27c4720e53ee19e0ae246d7aca2482b6661fa119efac648c
diff --git a/sys-firmware/seabios/seabios-1.16.3.ebuild b/sys-firmware/seabios/seabios-1.16.3.ebuild
new file mode 100644
index 000000000000..eaaa72c37fa1
--- /dev/null
+++ b/sys-firmware/seabios/seabios-1.16.3.ebuild
@@ -0,0 +1,142 @@
+# Copyright 1999-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+PYTHON_COMPAT=( python3_{10..12} )
+
+inherit toolchain-funcs python-any-r1
+
+# SeaBIOS maintainers sometimes don't release stable tarballs or stable
+# binaries to generate the stable tarball the following is necessary:
+# git clone git://git.seabios.org/seabios.git && cd seabios
+# git archive --output seabios-${PV}.tar.gz --prefix seabios-${PV}/ rel-${PV}
+
+if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then
+ EGIT_REPO_URI="git://git.seabios.org/seabios.git"
+ inherit git-r3
+else
+ SRC_URI="https://www.seabios.org/downloads/${P}.tar.gz"
+ KEYWORDS="~alpha ~amd64 ~arm64 ~loong ~m68k ~mips ~ppc ~ppc64 ~x86"
+fi
+
+DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS"
+HOMEPAGE="https://www.seabios.org/"
+
+LICENSE="LGPL-3 GPL-3"
+SLOT="0"
+IUSE="debug +seavgabios"
+
+BDEPEND="
+ >=sys-power/iasl-20060912
+ ${PYTHON_DEPS}"
+RDEPEND="!sys-firmware/seabios-bin"
+
+choose_target_chost() {
+ if [[ -n "${CC}" ]]; then
+ ${CC} -dumpmachine
+ return
+ fi
+
+ if use amd64 || use x86; then
+ # Use the native compiler
+ echo "${CHOST}"
+ return
+ fi
+
+ local i
+ for i in x86_64 i686 i586 i486 i386 ; do
+ i=${i}-pc-linux-gnu
+ type -P ${i}-gcc > /dev/null && echo ${i} && return
+ done
+}
+
+pkg_pretend() {
+ ewarn "You have decided to compile your own SeaBIOS. This is not"
+ ewarn "supported by upstream unless you use their recommended"
+ ewarn "toolchain (which you are not)."
+ elog
+ ewarn "If you are intending to use this build with QEMU, realize"
+ ewarn "you will not receive any support if you have compiled your"
+ ewarn "own SeaBIOS. Virtual machines subtly fail based on changes"
+ ewarn "in SeaBIOS."
+ if [[ -z "$(choose_target_chost)" ]]; then
+ elog
+ eerror "Before you can compile ${PN}, you need to install a x86 cross-compiler"
+ eerror "Run the following commands:"
+ eerror " emerge crossdev"
+ eerror " crossdev --stable -t x86_64-pc-linux-gnu"
+ die "cross-compiler is needed"
+ fi
+}
+
+src_prepare() {
+ default
+
+ # Ensure precompiled iasl files are never used
+ find "${WORKDIR}" -name '*.hex' -delete || die
+}
+
+src_configure() {
+ tc-ld-disable-gold #438058
+
+ if use debug ; then
+ echo "CONFIG_DEBUG_LEVEL=8" >.config
+ fi
+ _emake config
+}
+
+_emake() {
+ LANG=C \
+ emake V=1 \
+ CPP="$(tc-getPROG CPP cpp)" \
+ CC="$(tc-getCC)" \
+ LD="$(tc-getLD)" \
+ AR="$(tc-getAR)" \
+ AS="$(tc-getAS)" \
+ OBJCOPY="$(tc-getOBJCOPY)" \
+ RANLIB="$(tc-getRANLIB)" \
+ OBJDUMP="$(tc-getOBJDUMP)" \
+ STRIP="$(tc-getSTRIP)" \
+ HOST_CC="$(tc-getBUILD_CC)" \
+ VERSION="Gentoo/${EGIT_COMMIT:-${PVR}}" \
+ "$@"
+}
+
+src_compile() {
+ local TARGET_CHOST=$(choose_target_chost)
+
+ cp "${FILESDIR}/seabios/config.seabios-256k" .config || die
+ _emake oldnoconfig
+ CHOST="${TARGET_CHOST}" _emake iasl
+ CHOST="${TARGET_CHOST}" _emake out/bios.bin
+ mv out/bios.bin ../bios-256k.bin || die
+
+ if use seavgabios ; then
+ local config t targets=(
+ cirrus
+ isavga
+ qxl
+ stdvga
+ virtio
+ vmware
+ )
+ for t in "${targets[@]}" ; do
+ _emake clean distclean
+ cp "${FILESDIR}/seavgabios/config.vga-${t}" .config || die
+ _emake oldnoconfig
+ CHOST="${TARGET_CHOST}" _emake out/vgabios.bin
+ cp out/vgabios.bin ../vgabios-${t}.bin || die
+ done
+ fi
+}
+
+src_install() {
+ insinto /usr/share/seabios
+ doins ../bios-256k.bin
+
+ if use seavgabios ; then
+ insinto /usr/share/seavgabios
+ doins ../vgabios*.bin
+ fi
+}
^ permalink raw reply related [flat|nested] 59+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/
@ 2024-09-10 11:30 James Le Cuirot
0 siblings, 0 replies; 59+ messages in thread
From: James Le Cuirot @ 2024-09-10 11:30 UTC (permalink / raw
To: gentoo-commits
commit: e2915bcb26bb866f364ad296238da2053421fd4c
Author: James Le Cuirot <chewi <AT> gentoo <DOT> org>
AuthorDate: Tue Sep 10 11:26:58 2024 +0000
Commit: James Le Cuirot <chewi <AT> gentoo <DOT> org>
CommitDate: Tue Sep 10 11:30:31 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e2915bcb
sys-firmware/seabios: Migrate to tc-ld-force-bfd
Signed-off-by: James Le Cuirot <chewi <AT> gentoo.org>
sys-firmware/seabios/seabios-1.16.3.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-firmware/seabios/seabios-1.16.3.ebuild b/sys-firmware/seabios/seabios-1.16.3.ebuild
index 5e3eefbb46f8..801ae4507533 100644
--- a/sys-firmware/seabios/seabios-1.16.3.ebuild
+++ b/sys-firmware/seabios/seabios-1.16.3.ebuild
@@ -74,7 +74,7 @@ src_prepare() {
}
src_configure() {
- tc-ld-disable-gold #438058
+ tc-ld-force-bfd #438058
if use debug ; then
echo "CONFIG_DEBUG_LEVEL=8" >.config
^ permalink raw reply related [flat|nested] 59+ messages in thread
end of thread, other threads:[~2024-09-10 11:30 UTC | newest]
Thread overview: 59+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-01-04 21:22 [gentoo-commits] repo/gentoo:master commit in: sys-firmware/seabios/ Matthias Maier
-- strict thread matches above, loose matches on Subject: below --
2024-09-10 11:30 James Le Cuirot
2024-09-10 11:30 James Le Cuirot
2024-09-10 11:30 James Le Cuirot
2024-09-10 11:30 James Le Cuirot
2024-07-31 9:24 Pacho Ramos
2024-07-03 21:08 Matthias Maier
2022-12-05 19:48 Arthur Zamarin
2022-12-02 19:27 Arthur Zamarin
2022-12-02 18:50 Arthur Zamarin
2022-12-02 18:50 Arthur Zamarin
2022-09-27 3:27 John Helmert III
2022-09-27 3:27 John Helmert III
2022-09-27 3:27 John Helmert III
2022-05-19 12:19 WANG Xuerui
2022-01-23 8:05 Yixun Lan
2022-01-04 12:37 Matthias Maier
2021-10-01 7:14 Sam James
2021-07-12 22:38 Sam James
2021-06-30 10:55 Agostino Sarubbo
2021-06-28 1:36 Sam James
2021-06-28 1:35 Sam James
2021-06-28 1:35 Sam James
2021-05-17 7:49 Agostino Sarubbo
2021-05-17 7:47 Agostino Sarubbo
2021-05-17 3:03 Sam James
2021-05-16 23:43 Sam James
2021-05-16 0:03 Sam James
2021-04-30 21:44 Sergei Trofimovich
2021-04-05 1:06 Matthias Maier
2021-04-05 1:06 Matthias Maier
2020-12-28 17:29 Matthias Maier
2020-11-07 3:49 Georgy Yakovlev
2020-08-19 22:40 Sam James
2020-02-10 13:26 Michał Górny
2019-08-19 11:37 Agostino Sarubbo
2019-08-18 21:51 Agostino Sarubbo
2019-07-28 20:20 Matthias Maier
2018-11-11 21:14 Matthias Maier
2018-06-23 13:48 Mikle Kolyada
2018-06-17 23:29 Thomas Deutschmann
2018-06-10 3:41 Matthias Maier
2018-02-11 21:30 Matthias Maier
2018-02-11 21:30 Matthias Maier
2017-12-10 10:17 Pacho Ramos
2017-09-01 1:09 Matthias Maier
2017-01-22 19:23 Alon Bar-Lev
2017-01-21 17:27 Agostino Sarubbo
2017-01-21 17:16 Agostino Sarubbo
2017-01-02 18:53 Alon Bar-Lev
2016-12-29 20:09 Mike Frysinger
2016-11-11 0:37 Mike Frysinger
2016-03-17 23:47 Patrice Clement
2016-01-04 22:26 Mike Frysinger
2016-01-04 19:27 Mike Frysinger
2015-09-08 7:20 Agostino Sarubbo
2015-09-08 7:19 Agostino Sarubbo
2015-08-30 0:27 Mike Frysinger
2015-08-30 0:16 Mike Frysinger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox