* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2016-04-29 11:35 Alexey Shvetsov
0 siblings, 0 replies; 41+ messages in thread
From: Alexey Shvetsov @ 2016-04-29 11:35 UTC (permalink / raw
To: gentoo-commits
commit: 107e5c31a92fa780f72528a3b29fce69446ddf17
Author: Alexey Shvetsov <alexxy <AT> gentoo <DOT> org>
AuthorDate: Fri Apr 29 11:35:04 2016 +0000
Commit: Alexey Shvetsov <alexxy <AT> gentoo <DOT> org>
CommitDate: Fri Apr 29 11:35:04 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=107e5c31
media-gfx/cura: fix deps
should depend on libarcus[python]
Package-Manager: portage-2.2.28
media-gfx/cura/cura-2.1.0_beta.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/cura/cura-2.1.0_beta.ebuild b/media-gfx/cura/cura-2.1.0_beta.ebuild
index 5b991fa..0e4811d 100644
--- a/media-gfx/cura/cura-2.1.0_beta.ebuild
+++ b/media-gfx/cura/cura-2.1.0_beta.ebuild
@@ -20,7 +20,7 @@ SLOT="0"
IUSE="+usb"
RDEPEND="${PYTHON_DEPS}
- dev-libs/libarcus:=[${PYTHON_USEDEP}]
+ dev-libs/libarcus:=[python,${PYTHON_USEDEP}]
dev-python/uranium[${PYTHON_USEDEP}]
usb? ( dev-python/pyserial[${PYTHON_USEDEP}] )
~media-gfx/curaengine-${PV}"
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2016-05-22 17:05 Göktürk Yüksek
0 siblings, 0 replies; 41+ messages in thread
From: Göktürk Yüksek @ 2016-05-22 17:05 UTC (permalink / raw
To: gentoo-commits
commit: 167063bde372069b3b21c40969dc39f1a9f81c49
Author: Göktürk Yüksek <gokturk <AT> gentoo <DOT> org>
AuthorDate: Sat May 21 19:01:03 2016 +0000
Commit: Göktürk Yüksek <gokturk <AT> gentoo <DOT> org>
CommitDate: Sun May 22 17:04:00 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=167063bd
media-gfx/cura: fix license: s/AGPL-3/APGL-3+/
From cura/CuraApplication.py:
"Cura is released under the terms of the AGPLv3 or higher."
Package-Manager: portage-2.2.28
media-gfx/cura/cura-2.1.0_beta.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/cura/cura-2.1.0_beta.ebuild b/media-gfx/cura/cura-2.1.0_beta.ebuild
index 0e4811d..e0cf9a7 100644
--- a/media-gfx/cura/cura-2.1.0_beta.ebuild
+++ b/media-gfx/cura/cura-2.1.0_beta.ebuild
@@ -15,7 +15,7 @@ HOMEPAGE="https://github.com/Ultimaker/Cura"
SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${MY_PV}.tar.gz -> ${P}.tar.gz"
KEYWORDS="~amd64 ~x86"
-LICENSE="AGPL-3"
+LICENSE="AGPL-3+"
SLOT="0"
IUSE="+usb"
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2016-08-08 1:49 Göktürk Yüksek
0 siblings, 0 replies; 41+ messages in thread
From: Göktürk Yüksek @ 2016-08-08 1:49 UTC (permalink / raw
To: gentoo-commits
commit: abfdf0088e60ceb1f28aca1f88ff2d302f0bde5e
Author: Göktürk Yüksek <gokturk <AT> gentoo <DOT> org>
AuthorDate: Mon Aug 8 01:43:04 2016 +0000
Commit: Göktürk Yüksek <gokturk <AT> gentoo <DOT> org>
CommitDate: Mon Aug 8 01:43:04 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=abfdf008
media-gfx/cura: replace eapply && eapply_user with default
Package-Manager: portage-2.2.28
media-gfx/cura/cura-0.15.04.4.ebuild | 3 +--
media-gfx/cura/cura-0.15.04.5_rc5.ebuild | 3 +--
2 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/media-gfx/cura/cura-0.15.04.4.ebuild b/media-gfx/cura/cura-0.15.04.4.ebuild
index b6bcbf2..f2f700f 100644
--- a/media-gfx/cura/cura-0.15.04.4.ebuild
+++ b/media-gfx/cura/cura-0.15.04.4.ebuild
@@ -37,8 +37,7 @@ src_prepare() {
PYTHONPATH="\$PYTHONPATH:${EPREFIX}/usr/share/cura/" "${PYTHON}" "${EPREFIX}/usr/share/cura/cura.py" "\$@"
CURAEOF
- eapply "${PATCHES[@]}"
- eapply_user
+ default
}
src_install() {
diff --git a/media-gfx/cura/cura-0.15.04.5_rc5.ebuild b/media-gfx/cura/cura-0.15.04.5_rc5.ebuild
index 8fe0948..40231e4 100644
--- a/media-gfx/cura/cura-0.15.04.5_rc5.ebuild
+++ b/media-gfx/cura/cura-0.15.04.5_rc5.ebuild
@@ -38,8 +38,7 @@ src_prepare() {
PYTHONPATH="\$PYTHONPATH:${EPREFIX}/usr/share/cura/" "${PYTHON}" "${EPREFIX}/usr/share/cura/cura.py" "\$@"
CURAEOF
- eapply "${PATCHES[@]}"
- eapply_user
+ default
}
src_install() {
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2016-08-08 1:49 Göktürk Yüksek
0 siblings, 0 replies; 41+ messages in thread
From: Göktürk Yüksek @ 2016-08-08 1:49 UTC (permalink / raw
To: gentoo-commits
commit: 389c2ec602b39a7782c2c4d5ec991f2083fbba26
Author: Marshall Brewer (Gentoo Key) <tomboy64 <AT> sina <DOT> cn>
AuthorDate: Sat Apr 30 08:28:57 2016 +0000
Commit: Göktürk Yüksek <gokturk <AT> gentoo <DOT> org>
CommitDate: Mon Aug 8 01:33:32 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=389c2ec6
media-gfx/cura: new version 0.15.04.5_rc5 (legacy)
based on the original ebuild by _AxS_
EROOT are replaced with EPREFIX by the committer
Package-Manager: portage-2.2.28
media-gfx/cura/Manifest | 1 +
media-gfx/cura/cura-0.15.04.5_rc5.ebuild | 74 ++++++++++++++++++++++++++++++++
2 files changed, 75 insertions(+)
diff --git a/media-gfx/cura/Manifest b/media-gfx/cura/Manifest
index e3e56ce..113bc53 100644
--- a/media-gfx/cura/Manifest
+++ b/media-gfx/cura/Manifest
@@ -1,2 +1,3 @@
DIST cura-0.15.04.4.tar.gz 7265105 SHA256 9bce9cec7578792f7008a557930d16216ef97041a62071bb4e2b2a89638f1f54 SHA512 6d386c23731e2e02bc3b15d02aed1810622a57af2727325db29feb48eba8da0758925f3bc11fc6433a4b376706f66e6b00bfb3af2cac24cb184899848e11b1bd WHIRLPOOL cafd4bc3589214c3fc792c770eaa3f3590018f83ae82444c4f495245ab900748edabccb5a6518d9bd5b26295d7a953e3e60295b3baa90baf6abfe8a75012fbf2
+DIST cura-0.15.04.5_rc5.tar.gz 7266640 SHA256 12d72b1ece64bfc00909866e725f39867c9d82abdd793892df210afd35014c89 SHA512 cafb2b6883838e3e427e3da0388a6cd93d666052d9029eeb98bafad7970c805c271a7599fbdc493164d790f101b92bbd511479d2fc9f91c64f73677c6cee0a2f WHIRLPOOL b6ed8e0f9e17ee4d2c1eae3a8f8a0293529f6a4b362445d9296b47247aab91d521c64541ea9110c8b169eb01661f3cae30583f8f959d4d7bc0a8c255455db58b
DIST cura-2.1.0_beta.tar.gz 19784684 SHA256 b81f09307968475e33b03199aaf968e25d2b37fc7db9777b95c03053b1836f83 SHA512 9e4b4f0a93098f9cadf7d8969725e17ac549b6caced602a3d088e65068ab7fcda5a18e7e6f293434e7042360f0e37d87074d82d8884370bfbfc10e07a4212ce2 WHIRLPOOL 19ae138fa4b7c840ffc2d61779a08d48624bc6078fa83a6bec280d1a725e93bad6682d9f21a0cbe3ee4a4343a47a7e6f58d3fd559804f278241c7a5bb7d3cf89
diff --git a/media-gfx/cura/cura-0.15.04.5_rc5.ebuild b/media-gfx/cura/cura-0.15.04.5_rc5.ebuild
new file mode 100644
index 0000000..8fe0948
--- /dev/null
+++ b/media-gfx/cura/cura-0.15.04.5_rc5.ebuild
@@ -0,0 +1,74 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=6
+
+PYTHON_COMPAT=( python2_7 )
+inherit eutils fdo-mime gnome2-utils python-single-r1
+
+MY_PV=${PV#0.}
+MY_PV=${MY_PV/_rc/-RC}
+MY_PN=Cura
+SRC_URI="https://github.com/daid/${MY_PN}/archive/${MY_PV}.tar.gz -> ${P}.tar.gz"
+KEYWORDS="~amd64 ~x86"
+DESCRIPTION="A mesh slicer written in python to produce gcode for 3D printers"
+HOMEPAGE="https://github.com/daid/Cura"
+LICENSE="AGPL-3"
+SLOT="0"
+IUSE=""
+
+RDEPEND="${PYTHON_DEPS}
+ dev-python/wxpython:3.0[opengl,${PYTHON_USEDEP}]
+ >=dev-python/numpy-1.6.2[${PYTHON_USEDEP}]
+ >=dev-python/pyopengl-3.0.2[${PYTHON_USEDEP}]
+ >=dev-python/pyserial-2.6[${PYTHON_USEDEP}]
+ >=media-gfx/curaengine-${PV}
+"
+DEPEND="${RDEPEND}
+ >=dev-python/setuptools-0.6.34[${PYTHON_USEDEP}]"
+
+REQUIRED_USE="${PYTHON_REQ_USE}"
+PATCHES=( "${FILESDIR}/${PN}-0.15.04.4-nopower.patch" )
+S="${WORKDIR}/${MY_PN}-${MY_PV}"
+
+src_prepare() {
+ cat > "${T}"/cura <<- CURAEOF || die
+ #!/bin/sh
+ PYTHONPATH="\$PYTHONPATH:${EPREFIX}/usr/share/cura/" "${PYTHON}" "${EPREFIX}/usr/share/cura/cura.py" "\$@"
+ CURAEOF
+
+ eapply "${PATCHES[@]}"
+ eapply_user
+}
+
+src_install() {
+ insinto /usr/share/cura
+ doins -r Cura resources plugins scripts/linux/cura.py
+ newicon "${S}/resources/images/c.png" "cura.png"
+ echo ${PV} > "${ED}"usr/share/cura/version || die
+ dobin "${T}"/cura
+
+ python_optimize $(find "${ED}" -name '*.py' -exec dirname \{\} + | sort -u)
+}
+
+pkg_preinst() {
+ gnome2_icon_savelist
+
+ make_desktop_entry cura \
+ Cura \
+ "${EPREFIX}/usr/share/pixmaps/cura.png" \
+ "Graphics;3DGraphics;Engineering;Development"
+}
+
+pkg_postinst() {
+ fdo-mime_desktop_database_update
+ fdo-mime_mime_database_update
+ gnome2_icon_cache_update
+}
+
+pkg_postrm() {
+ fdo-mime_desktop_database_update
+ fdo-mime_mime_database_update
+ gnome2_icon_cache_update
+}
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2017-04-23 20:48 Michał Górny
0 siblings, 0 replies; 41+ messages in thread
From: Michał Górny @ 2017-04-23 20:48 UTC (permalink / raw
To: gentoo-commits
commit: 106bef5e5d0404494586310619ba2c7f6459b65f
Author: Michał Górny <mgorny <AT> gentoo <DOT> org>
AuthorDate: Sun Apr 23 20:34:37 2017 +0000
Commit: Michał Górny <mgorny <AT> gentoo <DOT> org>
CommitDate: Sun Apr 23 20:47:47 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=106bef5e
media-gfx/cura: Remove python@ from maintainers
media-gfx/cura/metadata.xml | 4 ----
1 file changed, 4 deletions(-)
diff --git a/media-gfx/cura/metadata.xml b/media-gfx/cura/metadata.xml
index aafd66fb97d..f06d3016b3d 100644
--- a/media-gfx/cura/metadata.xml
+++ b/media-gfx/cura/metadata.xml
@@ -13,10 +13,6 @@
<email>proxy-maint@gentoo.org</email>
<name>Gentoo Proxy Maintainers Project</name>
</maintainer>
- <maintainer type="project">
- <email>python@gentoo.org</email>
- <name>Gentoo Python Project</name>
- </maintainer>
<use>
<flag name="usb">Access 3D printers via USB</flag>
</use>
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2017-07-23 11:05 Alexey Shvetsov
0 siblings, 0 replies; 41+ messages in thread
From: Alexey Shvetsov @ 2017-07-23 11:05 UTC (permalink / raw
To: gentoo-commits
commit: 313886837d2d89c6a937cc055be15f9ffc7b8cd9
Author: Alexey Shvetsov <alexxy <AT> gentoo <DOT> org>
AuthorDate: Sun Jul 23 11:05:25 2017 +0000
Commit: Alexey Shvetsov <alexxy <AT> gentoo <DOT> org>
CommitDate: Sun Jul 23 11:05:25 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=31388683
media-gfx/cura: Version bump
Package-Manager: Portage-2.3.6, Repoman-2.3.2
media-gfx/cura/Manifest | 1 +
media-gfx/cura/cura-2.6.0.ebuild | 65 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 66 insertions(+)
diff --git a/media-gfx/cura/Manifest b/media-gfx/cura/Manifest
index 0a377e48ca8..8fca1f1c78a 100644
--- a/media-gfx/cura/Manifest
+++ b/media-gfx/cura/Manifest
@@ -2,3 +2,4 @@ DIST cura-0.15.04.4.tar.gz 7265105 SHA256 9bce9cec7578792f7008a557930d16216ef970
DIST cura-0.15.04.5_rc5.tar.gz 7266640 SHA256 12d72b1ece64bfc00909866e725f39867c9d82abdd793892df210afd35014c89 SHA512 cafb2b6883838e3e427e3da0388a6cd93d666052d9029eeb98bafad7970c805c271a7599fbdc493164d790f101b92bbd511479d2fc9f91c64f73677c6cee0a2f WHIRLPOOL b6ed8e0f9e17ee4d2c1eae3a8f8a0293529f6a4b362445d9296b47247aab91d521c64541ea9110c8b169eb01661f3cae30583f8f959d4d7bc0a8c255455db58b
DIST cura-2.1.0_beta.tar.gz 19784684 SHA256 b81f09307968475e33b03199aaf968e25d2b37fc7db9777b95c03053b1836f83 SHA512 9e4b4f0a93098f9cadf7d8969725e17ac549b6caced602a3d088e65068ab7fcda5a18e7e6f293434e7042360f0e37d87074d82d8884370bfbfc10e07a4212ce2 WHIRLPOOL 19ae138fa4b7c840ffc2d61779a08d48624bc6078fa83a6bec280d1a725e93bad6682d9f21a0cbe3ee4a4343a47a7e6f58d3fd559804f278241c7a5bb7d3cf89
DIST cura-2.3.1.tar.gz 8216743 SHA256 4542a5925b503f5416ebb8541fccb65d5c08164febafefdacb05b528c4cf73a8 SHA512 875c55a1b75f9e8c5bc6faac8f865a17ee371e973e3acf2528c09ee18bd517acbdde066f292c506ed67654119fdfeac86e28b41887807b767225e0ee6054301f WHIRLPOOL dfa7d3dac9f53d8682a4761900665598b7b75b08afd283a77f43351709eb2639c44b6694d626c17be98544acdceec50b8f6409fdb69efd1bb7d4a5f945e16cba
+DIST cura-2.6.0.tar.gz 10007980 SHA256 049617e8025a9e74ad4e733884a9c04319882d89e6ab346a72147995d43b44b5 SHA512 c437b284292682821d3e7c6fe67dfbf9e397588a604d0608fcc89019d02529720a929881d1ad0531fedba2f4b3efc98c1890624a4261dcccacbcfa24246d6e54 WHIRLPOOL 099378e95d0bd28f4df8e341f078a3f86c887c1799d4cfa84fa7d01cc50a9f9aa857a59f7c1d3f7ae240d11268eb2e82e6031f9390b83e97805d410ff4868975
diff --git a/media-gfx/cura/cura-2.6.0.ebuild b/media-gfx/cura/cura-2.6.0.ebuild
new file mode 100644
index 00000000000..0f92d0ff5de
--- /dev/null
+++ b/media-gfx/cura/cura-2.6.0.ebuild
@@ -0,0 +1,65 @@
+# Copyright 1999-2017 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="6"
+
+PYTHON_COMPAT=( python3_{4,5,6} )
+inherit cmake-utils fdo-mime gnome2-utils python-single-r1
+
+MY_PN=Cura
+MY_PV=${PV/_beta}
+
+DESCRIPTION="A 3D model slicing application for 3D printing"
+HOMEPAGE="https://github.com/Ultimaker/Cura"
+SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${MY_PV}.tar.gz -> ${P}.tar.gz"
+
+LICENSE="AGPL-3+"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE="+usb"
+REQUIRED_USE="${PYTHON_REQUIRED_USE}"
+
+RDEPEND="${PYTHON_DEPS}
+ dev-libs/libarcus:=[python,${PYTHON_USEDEP}]
+ dev-python/uranium[${PYTHON_USEDEP}]
+ sci-libs/scipy[${PYTHON_USEDEP}]
+ usb? ( dev-python/pyserial[${PYTHON_USEDEP}] )
+ ~media-gfx/curaengine-${PV}"
+DEPEND="${RDEPEND}
+ sys-devel/gettext"
+
+S="${WORKDIR}/${MY_PN}-${MY_PV}"
+PATCHES=( "${FILESDIR}/${PN}-2.3.1-fix-install-paths.patch" )
+DOCS=( README.md )
+
+src_configure() {
+ local mycmakeargs=(
+ -DPYTHON_SITE_PACKAGES_DIR="$(python_get_sitedir)" )
+ cmake-utils_src_configure
+}
+
+src_compile() {
+ cmake-utils_src_compile
+}
+
+src_install() {
+ cmake-utils_src_install
+ doicon icons/*.png
+ python_optimize "${D}${get_libdir}"
+}
+
+pkg_preinst() {
+ gnome2_icon_savelist
+}
+
+pkg_postinst() {
+ fdo-mime_desktop_database_update
+ fdo-mime_mime_database_update
+ gnome2_icon_cache_update
+}
+
+pkg_postrm() {
+ fdo-mime_desktop_database_update
+ fdo-mime_mime_database_update
+ gnome2_icon_cache_update
+}
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2017-11-26 23:02 David Seifert
0 siblings, 0 replies; 41+ messages in thread
From: David Seifert @ 2017-11-26 23:02 UTC (permalink / raw
To: gentoo-commits
commit: 9dd1b25cea1e69b0e3aec10abd8a805f97d63afe
Author: David Seifert <soap <AT> gentoo <DOT> org>
AuthorDate: Sun Nov 26 11:56:55 2017 +0000
Commit: David Seifert <soap <AT> gentoo <DOT> org>
CommitDate: Sun Nov 26 23:01:58 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=9dd1b25c
media-gfx/cura: [QA] Consistent whitespace in metadata.xml
media-gfx/cura/metadata.xml | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/media-gfx/cura/metadata.xml b/media-gfx/cura/metadata.xml
index f06d3016b3d..e0588ff0d2e 100644
--- a/media-gfx/cura/metadata.xml
+++ b/media-gfx/cura/metadata.xml
@@ -1,22 +1,22 @@
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd">
<pkgmetadata>
- <maintainer type="person">
- <email>tomboy64@sina.cn</email>
- <name>Matthew Brewer</name>
- </maintainer>
- <maintainer type="project">
- <email>3dprint@gentoo.org</email>
- <name>Gentoo 3D Printer Project</name>
- </maintainer>
- <maintainer type="project">
- <email>proxy-maint@gentoo.org</email>
- <name>Gentoo Proxy Maintainers Project</name>
- </maintainer>
+ <maintainer type="person">
+ <email>tomboy64@sina.cn</email>
+ <name>Matthew Brewer</name>
+ </maintainer>
+ <maintainer type="project">
+ <email>3dprint@gentoo.org</email>
+ <name>Gentoo 3D Printer Project</name>
+ </maintainer>
+ <maintainer type="project">
+ <email>proxy-maint@gentoo.org</email>
+ <name>Gentoo Proxy Maintainers Project</name>
+ </maintainer>
<use>
<flag name="usb">Access 3D printers via USB</flag>
</use>
- <upstream>
+ <upstream>
<remote-id type="github">Ultimaker/Cura</remote-id>
- </upstream>
+ </upstream>
</pkgmetadata>
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2018-04-03 15:28 Jonas Stein
0 siblings, 0 replies; 41+ messages in thread
From: Jonas Stein @ 2018-04-03 15:28 UTC (permalink / raw
To: gentoo-commits
commit: ba956921fc587f017085735eec41ab68f621181d
Author: Jonas Stein <jstein <AT> gentoo <DOT> org>
AuthorDate: Tue Apr 3 15:18:42 2018 +0000
Commit: Jonas Stein <jstein <AT> gentoo <DOT> org>
CommitDate: Tue Apr 3 15:27:42 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ba956921
media-gfx/cura: Maintainer retired
Proxied maintainer was retired due to inactivity.
Bug: https://bugs.gentoo.org/632854
Package-Manager: Portage-2.3.28, Repoman-2.3.9
media-gfx/cura/metadata.xml | 8 --------
1 file changed, 8 deletions(-)
diff --git a/media-gfx/cura/metadata.xml b/media-gfx/cura/metadata.xml
index e0588ff0d2e..e3e65a7508d 100644
--- a/media-gfx/cura/metadata.xml
+++ b/media-gfx/cura/metadata.xml
@@ -1,18 +1,10 @@
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd">
<pkgmetadata>
- <maintainer type="person">
- <email>tomboy64@sina.cn</email>
- <name>Matthew Brewer</name>
- </maintainer>
<maintainer type="project">
<email>3dprint@gentoo.org</email>
<name>Gentoo 3D Printer Project</name>
</maintainer>
- <maintainer type="project">
- <email>proxy-maint@gentoo.org</email>
- <name>Gentoo Proxy Maintainers Project</name>
- </maintainer>
<use>
<flag name="usb">Access 3D printers via USB</flag>
</use>
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2018-04-15 14:06 Amy Liffey
0 siblings, 0 replies; 41+ messages in thread
From: Amy Liffey @ 2018-04-15 14:06 UTC (permalink / raw
To: gentoo-commits
commit: 6540867b3b8836e1dcf090ae3c1c55091af557b9
Author: Marty E. Plummer <hanetzer <AT> startmail <DOT> com>
AuthorDate: Wed Apr 4 03:59:52 2018 +0000
Commit: Amy Liffey <amynka <AT> gentoo <DOT> org>
CommitDate: Sun Apr 15 14:05:30 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=6540867b
media-gfx/cura: fdo-mime migration
Plus some minor formatting changes to be more in accord with the rest of
the ::gentoo tree, and removal of eutils in favor of desktop.
Closes: https://github.com/gentoo/gentoo/pull/7800
Package-Manager: Portage-2.3.27, Repoman-2.3.9
media-gfx/cura/cura-0.15.04.4.ebuild | 17 ++++++++++-------
media-gfx/cura/cura-0.15.04.5_rc5.ebuild | 18 +++++++++++-------
media-gfx/cura/cura-2.1.0_beta.ebuild | 21 +++++++++++++--------
media-gfx/cura/cura-2.3.1.ebuild | 23 ++++++++++++++---------
media-gfx/cura/cura-2.6.0.ebuild | 21 +++++++++++++--------
5 files changed, 61 insertions(+), 39 deletions(-)
diff --git a/media-gfx/cura/cura-0.15.04.4.ebuild b/media-gfx/cura/cura-0.15.04.4.ebuild
index 59f9fbf4f8b..fa9ddb4d251 100644
--- a/media-gfx/cura/cura-0.15.04.4.ebuild
+++ b/media-gfx/cura/cura-0.15.04.4.ebuild
@@ -1,11 +1,11 @@
-# Copyright 1999-2017 Gentoo Foundation
+# Copyright 1999-2018 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
EAPI=6
PYTHON_COMPAT=( python2_7 )
-inherit eutils fdo-mime gnome2-utils python-single-r1
+inherit desktop gnome2-utils python-single-r1 xdg-utils
MY_PV=${PV#0.}
MY_PN=Cura
@@ -30,9 +30,12 @@ RDEPEND="${PYTHON_DEPS}
DEPEND="${RDEPEND}
>=dev-python/setuptools-0.6.34[${PYTHON_USEDEP}]"
-PATCHES=( "${FILESDIR}/${P}-nopower.patch" )
S="${WORKDIR}/${MY_PN}-${MY_PV}"
+PATCHES=(
+ "${FILESDIR}/${PN}-0.15.04.4-nopower.patch"
+)
+
src_prepare() {
cat > "${T}"/cura <<- CURAEOF || die
#!/bin/sh
@@ -62,13 +65,13 @@ pkg_preinst() {
}
pkg_postinst() {
- fdo-mime_desktop_database_update
- fdo-mime_mime_database_update
+ xdg_desktop_database_update
+ xdg_mimeinfo_database_update
gnome2_icon_cache_update
}
pkg_postrm() {
- fdo-mime_desktop_database_update
- fdo-mime_mime_database_update
+ xdg_desktop_database_update
+ xdg_mimeinfo_database_update
gnome2_icon_cache_update
}
diff --git a/media-gfx/cura/cura-0.15.04.5_rc5.ebuild b/media-gfx/cura/cura-0.15.04.5_rc5.ebuild
index ac952093c02..c35602d8d18 100644
--- a/media-gfx/cura/cura-0.15.04.5_rc5.ebuild
+++ b/media-gfx/cura/cura-0.15.04.5_rc5.ebuild
@@ -1,10 +1,11 @@
-# Copyright 1999-2017 Gentoo Foundation
+# Copyright 1999-2018 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
EAPI=6
PYTHON_COMPAT=( python2_7 )
-inherit eutils fdo-mime gnome2-utils python-single-r1
+
+inherit desktop gnome2-utils python-single-r1 xdg-utils
MY_PV=${PV#0.}
MY_PV=${MY_PV/_rc/-RC}
@@ -30,9 +31,12 @@ RDEPEND="${PYTHON_DEPS}
DEPEND="${RDEPEND}
>=dev-python/setuptools-0.6.34[${PYTHON_USEDEP}]"
-PATCHES=( "${FILESDIR}/${PN}-0.15.04.4-nopower.patch" )
S="${WORKDIR}/${MY_PN}-${MY_PV}"
+PATCHES=(
+ "${FILESDIR}/${PN}-0.15.04.4-nopower.patch"
+)
+
src_prepare() {
cat > "${T}"/cura <<- CURAEOF || die
#!/bin/sh
@@ -62,13 +66,13 @@ pkg_preinst() {
}
pkg_postinst() {
- fdo-mime_desktop_database_update
- fdo-mime_mime_database_update
+ xdg_desktop_database_update
+ xdg_mimeinfo_database_update
gnome2_icon_cache_update
}
pkg_postrm() {
- fdo-mime_desktop_database_update
- fdo-mime_mime_database_update
+ xdg_desktop_database_update
+ xdg_mimeinfo_database_update
gnome2_icon_cache_update
}
diff --git a/media-gfx/cura/cura-2.1.0_beta.ebuild b/media-gfx/cura/cura-2.1.0_beta.ebuild
index 9a28b902e3e..db1610abbb6 100644
--- a/media-gfx/cura/cura-2.1.0_beta.ebuild
+++ b/media-gfx/cura/cura-2.1.0_beta.ebuild
@@ -1,10 +1,11 @@
-# Copyright 1999-2017 Gentoo Foundation
+# Copyright 1999-2018 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-EAPI="6"
+EAPI=6
PYTHON_COMPAT=( python3_4 python3_5 )
-inherit cmake-utils fdo-mime gnome2-utils python-single-r1
+
+inherit cmake-utils gnome2-utils python-single-r1 xdg-utils
MY_PN=Cura
MY_PV=${PV/_beta}
@@ -28,7 +29,11 @@ DEPEND="${RDEPEND}
sys-devel/gettext"
S="${WORKDIR}/${MY_PN}-${MY_PV}"
-PATCHES=( "${FILESDIR}/${P}-fix-install-paths.patch" )
+
+PATCHES=(
+ "${FILESDIR}/${PN}-2.1.0_beta-fix-install-paths.patch"
+)
+
DOCS=( README.md )
src_configure() {
@@ -52,13 +57,13 @@ pkg_preinst() {
}
pkg_postinst() {
- fdo-mime_desktop_database_update
- fdo-mime_mime_database_update
+ xdg_desktop_database_update
+ xdg_mimeinfo_database_update
gnome2_icon_cache_update
}
pkg_postrm() {
- fdo-mime_desktop_database_update
- fdo-mime_mime_database_update
+ xdg_desktop_database_update
+ xdg_mimeinfo_database_update
gnome2_icon_cache_update
}
diff --git a/media-gfx/cura/cura-2.3.1.ebuild b/media-gfx/cura/cura-2.3.1.ebuild
index 39b5a6d0514..9af78aaedc3 100644
--- a/media-gfx/cura/cura-2.3.1.ebuild
+++ b/media-gfx/cura/cura-2.3.1.ebuild
@@ -1,10 +1,11 @@
-# Copyright 1999-2017 Gentoo Foundation
+# Copyright 1999-2018 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-EAPI="6"
+EAPI=6
-PYTHON_COMPAT=( python3_4 python3_5 )
-inherit cmake-utils fdo-mime gnome2-utils python-single-r1
+PYTHON_COMPAT=( python3_{4,5} )
+
+inherit cmake-utils gnome2-utils python-single-r1 xdg-utils
MY_PN=Cura
MY_PV=${PV/_beta}
@@ -29,7 +30,11 @@ DEPEND="${RDEPEND}
sys-devel/gettext"
S="${WORKDIR}/${MY_PN}-${MY_PV}"
-PATCHES=( "${FILESDIR}/${P}-fix-install-paths.patch" )
+
+PATCHES=(
+ "${FILESDIR}/${PN}-2.3.1-fix-install-paths.patch"
+)
+
DOCS=( README.md )
src_configure() {
@@ -53,13 +58,13 @@ pkg_preinst() {
}
pkg_postinst() {
- fdo-mime_desktop_database_update
- fdo-mime_mime_database_update
+ xdg_desktop_database_update
+ xdg_mimeinfo_database_update
gnome2_icon_cache_update
}
pkg_postrm() {
- fdo-mime_desktop_database_update
- fdo-mime_mime_database_update
+ xdg_desktop_database_update
+ xdg_mimeinfo_database_update
gnome2_icon_cache_update
}
diff --git a/media-gfx/cura/cura-2.6.0.ebuild b/media-gfx/cura/cura-2.6.0.ebuild
index 0f92d0ff5de..bf9f44699fb 100644
--- a/media-gfx/cura/cura-2.6.0.ebuild
+++ b/media-gfx/cura/cura-2.6.0.ebuild
@@ -1,10 +1,11 @@
-# Copyright 1999-2017 Gentoo Foundation
+# Copyright 1999-2018 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-EAPI="6"
+EAPI=6
PYTHON_COMPAT=( python3_{4,5,6} )
-inherit cmake-utils fdo-mime gnome2-utils python-single-r1
+
+inherit cmake-utils gnome2-utils python-single-r1 xdg-utils
MY_PN=Cura
MY_PV=${PV/_beta}
@@ -29,7 +30,11 @@ DEPEND="${RDEPEND}
sys-devel/gettext"
S="${WORKDIR}/${MY_PN}-${MY_PV}"
-PATCHES=( "${FILESDIR}/${PN}-2.3.1-fix-install-paths.patch" )
+
+PATCHES=(
+ "${FILESDIR}/${PN}-2.3.1-fix-install-paths.patch"
+)
+
DOCS=( README.md )
src_configure() {
@@ -53,13 +58,13 @@ pkg_preinst() {
}
pkg_postinst() {
- fdo-mime_desktop_database_update
- fdo-mime_mime_database_update
+ xdg_desktop_database_update
+ xdg_mimeinfo_database_update
gnome2_icon_cache_update
}
pkg_postrm() {
- fdo-mime_desktop_database_update
- fdo-mime_mime_database_update
+ xdg_desktop_database_update
+ xdg_mimeinfo_database_update
gnome2_icon_cache_update
}
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2018-06-14 20:14 Alexey Shvetsov
0 siblings, 0 replies; 41+ messages in thread
From: Alexey Shvetsov @ 2018-06-14 20:14 UTC (permalink / raw
To: gentoo-commits
commit: 639fc828889d2bd25d4c4a382a057b61544a0e83
Author: Alexey Shvetsov <alexxy <AT> gentoo <DOT> org>
AuthorDate: Thu Jun 14 20:12:57 2018 +0000
Commit: Alexey Shvetsov <alexxy <AT> gentoo <DOT> org>
CommitDate: Thu Jun 14 20:13:48 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=639fc828
media-gfx/cura: deps and metadata update
Package-Manager: Portage-2.3.40, Repoman-2.3.9
media-gfx/cura/cura-3.3.1.ebuild | 10 +++++-----
media-gfx/cura/metadata.xml | 19 +++++++++++++++++++
2 files changed, 24 insertions(+), 5 deletions(-)
diff --git a/media-gfx/cura/cura-3.3.1.ebuild b/media-gfx/cura/cura-3.3.1.ebuild
index c8501394398..b2a58d65a58 100644
--- a/media-gfx/cura/cura-3.3.1.ebuild
+++ b/media-gfx/cura/cura-3.3.1.ebuild
@@ -19,11 +19,11 @@ IUSE="+usb zeroconf"
REQUIRED_USE="${PYTHON_REQUIRED_USE}"
RDEPEND="${PYTHON_DEPS}
- dev-python/uranium[${PYTHON_USEDEP}]
- media-gfx/curaengine
- media-gfx/fdm-materials
- dev-libs/libsavitar:=[python,${PYTHON_USEDEP}]
- dev-libs/libcharon[${PYTHON_USEDEP}]
+ >=dev-python/uranium-${PV:0:3}[${PYTHON_USEDEP}]
+ >=media-gfx/curaengine-${PV:0:3}
+ >=media-gfx/fdm-materials-${PV:0:3}
+ >=dev-libs/libsavitar-${PV:0:3}:=[python,${PYTHON_USEDEP}]
+ >=dev-libs/libcharon-${PV:0:3}[${PYTHON_USEDEP}]
usb? ( dev-python/pyserial[${PYTHON_USEDEP}] )
zeroconf? ( dev-python/zeroconf[${PYTHON_USEDEP}] )"
diff --git a/media-gfx/cura/metadata.xml b/media-gfx/cura/metadata.xml
index e3e65a7508d..19761d81848 100644
--- a/media-gfx/cura/metadata.xml
+++ b/media-gfx/cura/metadata.xml
@@ -5,6 +5,25 @@
<email>3dprint@gentoo.org</email>
<name>Gentoo 3D Printer Project</name>
</maintainer>
+ <maintainer type="person">
+ <email>alexxy@gentoo.org</email>
+ <name>Alexey Shvetsov</name>
+ </maintainer>
+ <maintainer type="project">
+ <email>proxy-maint@gentoo.org</email>
+ <name>Proxy Maintainers</name>
+ </maintainer>
+ <maintainer type="person">
+ <email>mathy@vanvoorden.be</email>
+ <name>Mathy Vanvoorden</name>
+ </maintainer>
+ <maintainer type="person">
+ <email>perlovka@gmail.com</email>
+ <name>Michael Perlov</name>
+ </maintainer>
+ <slots>
+ <subslots>soname major version number</subslots>
+ </slots>
<use>
<flag name="usb">Access 3D printers via USB</flag>
</use>
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2018-07-16 17:29 Amy Liffey
0 siblings, 0 replies; 41+ messages in thread
From: Amy Liffey @ 2018-07-16 17:29 UTC (permalink / raw
To: gentoo-commits
commit: f852e30c276334b5ca21b25d171a832a9781a63b
Author: Michael Perlov <perlovka <AT> gmail <DOT> com>
AuthorDate: Thu Jul 12 10:25:31 2018 +0000
Commit: Amy Liffey <amynka <AT> gentoo <DOT> org>
CommitDate: Mon Jul 16 17:27:48 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=f852e30c
media-gfx/cura: version bump to 3.4.1
Closes: https://bugs.gentoo.org/660884
Closes: https://github.com/gentoo/gentoo/pull/9199
Package-Manager: Portage-2.3.42, Repoman-2.3.9
media-gfx/cura/Manifest | 1 +
media-gfx/cura/cura-3.4.1.ebuild | 73 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 74 insertions(+)
diff --git a/media-gfx/cura/Manifest b/media-gfx/cura/Manifest
index ba038040485..fc0e250b33e 100644
--- a/media-gfx/cura/Manifest
+++ b/media-gfx/cura/Manifest
@@ -1 +1,2 @@
DIST cura-3.3.1.tar.gz 21045888 BLAKE2B 6298a291498fb7930970fdb15827e5698011e69c69326e07ecaf5440994b099aa3ce9ee2540b968ffaff1ad47a58ef76bc7c5c003e92b710d81fc649e4fc825a SHA512 7b05885213828f0c297c7798b4bf7ea5967902893b5743b424d65d3a0c88804ed208c3d0361b92cade8ad31a42d1aff3a07eb4d2effa15597f942603a2d2bf63
+DIST cura-3.4.1.tar.gz 21720836 BLAKE2B 228ad51d189f83d2a34c2af7a6edcbe468bc32ee6ac012141eac1b7332046790e2e85c4e643c1ebb13ceded6024cd52aeab2bcd0db555db8f355a7b568bed728 SHA512 5d1935c923173a5ea6d3a95181d61c8deffbb51f3ee4f3e4cb2c5a58f79581d3dd9adc6a9583e6ca0ab5da4c36b63695d7479e67d1237c132354616aa990e3c1
diff --git a/media-gfx/cura/cura-3.4.1.ebuild b/media-gfx/cura/cura-3.4.1.ebuild
new file mode 100644
index 00000000000..d913218b642
--- /dev/null
+++ b/media-gfx/cura/cura-3.4.1.ebuild
@@ -0,0 +1,73 @@
+# Copyright 1999-2018 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=6
+
+PYTHON_COMPAT=( python3_{5,6} )
+inherit cmake-utils fdo-mime gnome2-utils python-single-r1
+
+MY_PN=Cura
+
+DESCRIPTION="A 3D model slicing application for 3D printing"
+HOMEPAGE="https://github.com/Ultimaker/Cura"
+SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${PV}.tar.gz -> ${P}.tar.gz"
+
+LICENSE="LGPL-3"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE="+usb zeroconf"
+REQUIRED_USE="${PYTHON_REQUIRED_USE}"
+
+RDEPEND="${PYTHON_DEPS}
+ >=dev-python/uranium-${PV:0:3}[${PYTHON_USEDEP}]
+ >=media-gfx/curaengine-${PV:0:3}
+ >=media-gfx/fdm-materials-${PV:0:3}
+ >=dev-libs/libsavitar-${PV:0:3}:=[python,${PYTHON_USEDEP}]
+ >=dev-libs/libcharon-${PV:0:3}[${PYTHON_USEDEP}]
+ usb? ( dev-python/pyserial[${PYTHON_USEDEP}] )
+ zeroconf? ( dev-python/zeroconf[${PYTHON_USEDEP}] )"
+
+DEPEND="${RDEPEND}
+ sys-devel/gettext"
+
+S="${WORKDIR}/${MY_PN}-${PV}"
+PATCHES=( "${FILESDIR}/${PN}-3.3.0-fix-install-paths.patch" )
+DOCS=( README.md )
+
+src_prepare() {
+ default
+ sed -i "s/set(CURA_VERSION \"master\"/set(CURA_VERSION \"${PV}\"/" CMakeLists.txt || die
+}
+
+src_configure() {
+ local mycmakeargs=(
+ -DPYTHON_SITE_PACKAGES_DIR="$(python_get_sitedir)"
+ )
+ cmake-utils_src_configure
+}
+
+src_compile() {
+ cmake-utils_src_compile
+}
+
+src_install() {
+ cmake-utils_src_install
+ doicon icons/*.png
+ python_optimize "${D}${get_libdir}"
+}
+
+pkg_preinst() {
+ gnome2_icon_savelist
+}
+
+pkg_postinst() {
+ fdo-mime_desktop_database_update
+ fdo-mime_mime_database_update
+ gnome2_icon_cache_update
+}
+
+pkg_postrm() {
+ fdo-mime_desktop_database_update
+ fdo-mime_mime_database_update
+ gnome2_icon_cache_update
+}
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2019-01-02 21:52 Amy Liffey
0 siblings, 0 replies; 41+ messages in thread
From: Amy Liffey @ 2019-01-02 21:52 UTC (permalink / raw
To: gentoo-commits
commit: b4bcea7b6bf920147435fbbf39a4d546f63866c3
Author: Mathy Vanvoorden <mathy <AT> vanvoorden <DOT> be>
AuthorDate: Sat Dec 8 23:02:54 2018 +0000
Commit: Amy Liffey <amynka <AT> gentoo <DOT> org>
CommitDate: Wed Jan 2 21:49:03 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=b4bcea7b
media-gfx/cura: version bump to 3.6.0
Closes: https://bugs.gentoo.org/show_bug.cgi?id=669264
Closes: https://bugs.gentoo.org/show_bug.cgi?id=671552
Signed-off-by: Mathy Vanvoorden <mathy <AT> vanvoorden.be>
Signed-off-by: Amy Liffey <amynka <AT> gentoo.org>
Closes: https://github.com/gentoo/gentoo/pull/10595
Package-Manager: Portage[mgorny]-2.3.51.1
media-gfx/cura/Manifest | 1 +
media-gfx/cura/cura-3.6.0.ebuild | 73 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 74 insertions(+)
diff --git a/media-gfx/cura/Manifest b/media-gfx/cura/Manifest
index fc0e250b33e..e25b1427a32 100644
--- a/media-gfx/cura/Manifest
+++ b/media-gfx/cura/Manifest
@@ -1,2 +1,3 @@
DIST cura-3.3.1.tar.gz 21045888 BLAKE2B 6298a291498fb7930970fdb15827e5698011e69c69326e07ecaf5440994b099aa3ce9ee2540b968ffaff1ad47a58ef76bc7c5c003e92b710d81fc649e4fc825a SHA512 7b05885213828f0c297c7798b4bf7ea5967902893b5743b424d65d3a0c88804ed208c3d0361b92cade8ad31a42d1aff3a07eb4d2effa15597f942603a2d2bf63
DIST cura-3.4.1.tar.gz 21720836 BLAKE2B 228ad51d189f83d2a34c2af7a6edcbe468bc32ee6ac012141eac1b7332046790e2e85c4e643c1ebb13ceded6024cd52aeab2bcd0db555db8f355a7b568bed728 SHA512 5d1935c923173a5ea6d3a95181d61c8deffbb51f3ee4f3e4cb2c5a58f79581d3dd9adc6a9583e6ca0ab5da4c36b63695d7479e67d1237c132354616aa990e3c1
+DIST cura-3.6.0.tar.gz 23388945 BLAKE2B bd2f2e688306e7ef060141abae22c858e9fbb9385e49110079b48e69955c3f6630f8f69ad67fdf2d9e5c1ac0c969cd2d2f416642fc61a63867f79f88985c5c86 SHA512 b56e5575cb0eb15d759999dcd2f4c33873a0a57805a8ba0ec7860811a2137658a656216c969c6e3316d65fbd5e43f2def10a6385ccbf4fc306d15098569ef279
diff --git a/media-gfx/cura/cura-3.6.0.ebuild b/media-gfx/cura/cura-3.6.0.ebuild
new file mode 100644
index 00000000000..379309b70d6
--- /dev/null
+++ b/media-gfx/cura/cura-3.6.0.ebuild
@@ -0,0 +1,73 @@
+# Copyright 1999-2018 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=6
+
+PYTHON_COMPAT=( python3_{5,6} )
+inherit cmake-utils fdo-mime gnome2-utils python-single-r1
+
+MY_PN=Cura
+
+DESCRIPTION="A 3D model slicing application for 3D printing"
+HOMEPAGE="https://github.com/Ultimaker/Cura"
+SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${PV}.tar.gz -> ${P}.tar.gz"
+
+LICENSE="LGPL-3"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE="+usb zeroconf"
+REQUIRED_USE="${PYTHON_REQUIRED_USE}"
+
+RDEPEND="${PYTHON_DEPS}
+ >=dev-python/uranium-${PV:0:3}[${PYTHON_USEDEP}]
+ >=media-gfx/curaengine-${PV:0:3}
+ >=media-gfx/fdm-materials-${PV:0:3}
+ >=dev-libs/libsavitar-${PV:0:3}:=[python,${PYTHON_USEDEP}]
+ >=dev-libs/libcharon-${PV:0:3}[${PYTHON_USEDEP}]
+ usb? ( dev-python/pyserial[${PYTHON_USEDEP}] )
+ zeroconf? ( dev-python/zeroconf[${PYTHON_USEDEP}] )"
+
+DEPEND="${RDEPEND}
+ sys-devel/gettext"
+
+S="${WORKDIR}/${MY_PN}-${PV}"
+PATCHES=( "${FILESDIR}/${PN}-3.3.0-fix-install-paths.patch" )
+DOCS=( README.md )
+
+src_prepare() {
+ default
+ sed -i "s/set(CURA_VERSION \"master\"/set(CURA_VERSION \"${PV}\"/" CMakeLists.txt || die
+}
+
+src_configure() {
+ local mycmakeargs=(
+ -DPYTHON_SITE_PACKAGES_DIR="$(python_get_sitedir)"
+ )
+ cmake-utils_src_configure
+}
+
+src_compile() {
+ cmake-utils_src_compile
+}
+
+src_install() {
+ cmake-utils_src_install
+ doicon icons/*.png
+ python_optimize "${D}${get_libdir}"
+}
+
+pkg_preinst() {
+ gnome2_icon_savelist
+}
+
+pkg_postinst() {
+ fdo-mime_desktop_database_update
+ fdo-mime_mime_database_update
+ gnome2_icon_cache_update
+}
+
+pkg_postrm() {
+ fdo-mime_desktop_database_update
+ fdo-mime_mime_database_update
+ gnome2_icon_cache_update
+}
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2019-01-02 22:05 Amy Liffey
0 siblings, 0 replies; 41+ messages in thread
From: Amy Liffey @ 2019-01-02 22:05 UTC (permalink / raw
To: gentoo-commits
commit: 8fdabec85e94a3bf248e9457e5267edd1d81db9d
Author: Amy Liffey <amynka <AT> gentoo <DOT> org>
AuthorDate: Wed Jan 2 22:00:29 2019 +0000
Commit: Amy Liffey <amynka <AT> gentoo <DOT> org>
CommitDate: Wed Jan 2 22:04:29 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=8fdabec8
media-gfx/cura: remove old 3.3.1
Signed-off-by: Amy Liffey <amynka <AT> gentoo.org>
Package-Manager: Portage-2.3.49, Repoman-2.3.11
media-gfx/cura/Manifest | 1 -
media-gfx/cura/cura-3.3.1.ebuild | 68 ----------------------------------------
2 files changed, 69 deletions(-)
diff --git a/media-gfx/cura/Manifest b/media-gfx/cura/Manifest
index e25b1427a32..1dad2dcaf9a 100644
--- a/media-gfx/cura/Manifest
+++ b/media-gfx/cura/Manifest
@@ -1,3 +1,2 @@
-DIST cura-3.3.1.tar.gz 21045888 BLAKE2B 6298a291498fb7930970fdb15827e5698011e69c69326e07ecaf5440994b099aa3ce9ee2540b968ffaff1ad47a58ef76bc7c5c003e92b710d81fc649e4fc825a SHA512 7b05885213828f0c297c7798b4bf7ea5967902893b5743b424d65d3a0c88804ed208c3d0361b92cade8ad31a42d1aff3a07eb4d2effa15597f942603a2d2bf63
DIST cura-3.4.1.tar.gz 21720836 BLAKE2B 228ad51d189f83d2a34c2af7a6edcbe468bc32ee6ac012141eac1b7332046790e2e85c4e643c1ebb13ceded6024cd52aeab2bcd0db555db8f355a7b568bed728 SHA512 5d1935c923173a5ea6d3a95181d61c8deffbb51f3ee4f3e4cb2c5a58f79581d3dd9adc6a9583e6ca0ab5da4c36b63695d7479e67d1237c132354616aa990e3c1
DIST cura-3.6.0.tar.gz 23388945 BLAKE2B bd2f2e688306e7ef060141abae22c858e9fbb9385e49110079b48e69955c3f6630f8f69ad67fdf2d9e5c1ac0c969cd2d2f416642fc61a63867f79f88985c5c86 SHA512 b56e5575cb0eb15d759999dcd2f4c33873a0a57805a8ba0ec7860811a2137658a656216c969c6e3316d65fbd5e43f2def10a6385ccbf4fc306d15098569ef279
diff --git a/media-gfx/cura/cura-3.3.1.ebuild b/media-gfx/cura/cura-3.3.1.ebuild
deleted file mode 100644
index b2a58d65a58..00000000000
--- a/media-gfx/cura/cura-3.3.1.ebuild
+++ /dev/null
@@ -1,68 +0,0 @@
-# Copyright 1999-2018 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-PYTHON_COMPAT=( python3_{5,6} )
-inherit cmake-utils fdo-mime gnome2-utils python-single-r1
-
-MY_PN=Cura
-
-DESCRIPTION="A 3D model slicing application for 3D printing"
-HOMEPAGE="https://github.com/Ultimaker/Cura"
-SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${PV}.tar.gz -> ${P}.tar.gz"
-
-LICENSE="LGPL-3"
-SLOT="0"
-KEYWORDS="~amd64 ~x86"
-IUSE="+usb zeroconf"
-REQUIRED_USE="${PYTHON_REQUIRED_USE}"
-
-RDEPEND="${PYTHON_DEPS}
- >=dev-python/uranium-${PV:0:3}[${PYTHON_USEDEP}]
- >=media-gfx/curaengine-${PV:0:3}
- >=media-gfx/fdm-materials-${PV:0:3}
- >=dev-libs/libsavitar-${PV:0:3}:=[python,${PYTHON_USEDEP}]
- >=dev-libs/libcharon-${PV:0:3}[${PYTHON_USEDEP}]
- usb? ( dev-python/pyserial[${PYTHON_USEDEP}] )
- zeroconf? ( dev-python/zeroconf[${PYTHON_USEDEP}] )"
-
-DEPEND="${RDEPEND}
- sys-devel/gettext"
-
-S="${WORKDIR}/${MY_PN}-${PV}"
-PATCHES=( "${FILESDIR}/${PN}-3.3.0-fix-install-paths.patch" )
-DOCS=( README.md )
-
-src_configure() {
- local mycmakeargs=(
- -DPYTHON_SITE_PACKAGES_DIR="$(python_get_sitedir)"
- )
- cmake-utils_src_configure
-}
-
-src_compile() {
- cmake-utils_src_compile
-}
-
-src_install() {
- cmake-utils_src_install
- doicon icons/*.png
- python_optimize "${D}${get_libdir}"
-}
-
-pkg_preinst() {
- gnome2_icon_savelist
-}
-
-pkg_postinst() {
- fdo-mime_desktop_database_update
- fdo-mime_mime_database_update
- gnome2_icon_cache_update
-}
-
-pkg_postrm() {
- fdo-mime_desktop_database_update
- fdo-mime_mime_database_update
- gnome2_icon_cache_update
-}
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2019-10-16 5:22 Joonas Niilola
0 siblings, 0 replies; 41+ messages in thread
From: Joonas Niilola @ 2019-10-16 5:22 UTC (permalink / raw
To: gentoo-commits
commit: 1fb659401ca98a043696a0e3fb3ed1e4c0b5d9ea
Author: Michael Perlov <perlovka <AT> gmail <DOT> com>
AuthorDate: Sat Sep 28 10:39:07 2019 +0000
Commit: Joonas Niilola <juippis <AT> gentoo <DOT> org>
CommitDate: Wed Oct 16 05:22:00 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=1fb65940
media-gfx/cura: version bump to 4.3.0
Package-Manager: Portage-2.3.76, Repoman-2.3.17
Signed-off-by: Michael Perlov <perlovka <AT> gmail.com>
Signed-off-by: Joonas Niilola <juippis <AT> gentoo.org>
media-gfx/cura/Manifest | 1 +
media-gfx/cura/cura-4.3.0.ebuild | 53 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 54 insertions(+)
diff --git a/media-gfx/cura/Manifest b/media-gfx/cura/Manifest
index 4816b7899c8..698ecfb22ab 100644
--- a/media-gfx/cura/Manifest
+++ b/media-gfx/cura/Manifest
@@ -1,3 +1,4 @@
DIST cura-3.4.1.tar.gz 21720836 BLAKE2B 228ad51d189f83d2a34c2af7a6edcbe468bc32ee6ac012141eac1b7332046790e2e85c4e643c1ebb13ceded6024cd52aeab2bcd0db555db8f355a7b568bed728 SHA512 5d1935c923173a5ea6d3a95181d61c8deffbb51f3ee4f3e4cb2c5a58f79581d3dd9adc6a9583e6ca0ab5da4c36b63695d7479e67d1237c132354616aa990e3c1
DIST cura-3.6.0.tar.gz 23388945 BLAKE2B bd2f2e688306e7ef060141abae22c858e9fbb9385e49110079b48e69955c3f6630f8f69ad67fdf2d9e5c1ac0c969cd2d2f416642fc61a63867f79f88985c5c86 SHA512 b56e5575cb0eb15d759999dcd2f4c33873a0a57805a8ba0ec7860811a2137658a656216c969c6e3316d65fbd5e43f2def10a6385ccbf4fc306d15098569ef279
DIST cura-4.2.1.tar.gz 29288696 BLAKE2B 1332030e63d7056dcb8dd680208b0da8dd33e5c7809957779849bac808fccad9a222505ddbe80d4071474d10ace842aa4459f14560198a9f3eebb5be53f923e1 SHA512 4f47f3f5597d1a56d88207eacacece49edb766c75ae18ddc9fb8689b76c16fd4decc9c8af7cab485aac3c9cffe13095aaad34e1c60634249ae2923ead771ac52
+DIST cura-4.3.0.tar.gz 30433646 BLAKE2B 8490d703cfd4ad07fd5b30d5f776d978baa17ad8751dad53870714596998becebc85cc2fe49fa05eab37b95106315ace97eaa0bbed65b488b522ebbbcba488dc SHA512 3f4ae11e4e28b151e9587c197f814bc97bc225fb2819f4dabaab392ef9896bb119d6fab0df48c9eb4a390a815815d27045eefa933e2e4a9d53331db8d79ea815
diff --git a/media-gfx/cura/cura-4.3.0.ebuild b/media-gfx/cura/cura-4.3.0.ebuild
new file mode 100644
index 00000000000..aed51febac2
--- /dev/null
+++ b/media-gfx/cura/cura-4.3.0.ebuild
@@ -0,0 +1,53 @@
+# Copyright 1999-2019 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+PYTHON_COMPAT=( python3_{5,6} )
+inherit cmake-utils desktop python-single-r1 xdg
+
+MY_PN=Cura
+
+DESCRIPTION="A 3D model slicing application for 3D printing"
+HOMEPAGE="https://github.com/Ultimaker/Cura"
+SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${PV}.tar.gz -> ${P}.tar.gz"
+
+LICENSE="LGPL-3"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE="+usb zeroconf"
+REQUIRED_USE="${PYTHON_REQUIRED_USE}"
+
+BDEPEND="sys-devel/gettext"
+RDEPEND="${PYTHON_DEPS}
+ >=dev-python/uranium-${PV:0:3}[${PYTHON_USEDEP}]
+ >=media-gfx/curaengine-${PV:0:3}
+ >=media-gfx/fdm-materials-${PV:0:3}
+ >=dev-libs/libsavitar-${PV:0:3}:=[python,${PYTHON_USEDEP}]
+ >=dev-libs/libcharon-${PV:0:3}[${PYTHON_USEDEP}]
+ usb? ( dev-python/pyserial[${PYTHON_USEDEP}] )
+ zeroconf? ( dev-python/zeroconf[${PYTHON_USEDEP}] )"
+
+DEPEND="${RDEPEND}"
+
+DOCS=( README.md )
+PATCHES=( "${FILESDIR}/${PN}-4.2.1-fix-install-paths.patch" )
+S="${WORKDIR}/${MY_PN}-${PV}"
+
+src_prepare() {
+ sed -i "s/set(CURA_VERSION \"master\"/set(CURA_VERSION \"${PV}\"/" CMakeLists.txt || die
+ cmake-utils_src_prepare
+}
+
+src_configure() {
+ local mycmakeargs=(
+ -DPYTHON_SITE_PACKAGES_DIR="$(python_get_sitedir)"
+ )
+ cmake-utils_src_configure
+}
+
+src_install() {
+ cmake-utils_src_install
+ doicon icons/*.png
+ python_optimize "${D}${get_libdir}"
+}
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2020-02-09 16:29 Michał Górny
0 siblings, 0 replies; 41+ messages in thread
From: Michał Górny @ 2020-02-09 16:29 UTC (permalink / raw
To: gentoo-commits
commit: cecd559e5e4c0b727413d688ccbdc663024a6c0f
Author: Michał Górny <mgorny <AT> gentoo <DOT> org>
AuthorDate: Fri Feb 7 14:59:26 2020 +0000
Commit: Michał Górny <mgorny <AT> gentoo <DOT> org>
CommitDate: Sun Feb 9 16:26:44 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=cecd559e
media-gfx/cura: Switch to PYTHON_MULTI_USEDEP API
Signed-off-by: Michał Górny <mgorny <AT> gentoo.org>
media-gfx/cura/cura-3.4.1.ebuild | 12 +++++++-----
media-gfx/cura/cura-3.6.0.ebuild | 12 +++++++-----
media-gfx/cura/cura-4.2.1.ebuild | 12 +++++++-----
media-gfx/cura/{cura-4.3.0.ebuild => cura-4.3.0-r1.ebuild} | 12 +++++++-----
4 files changed, 28 insertions(+), 20 deletions(-)
diff --git a/media-gfx/cura/cura-3.4.1.ebuild b/media-gfx/cura/cura-3.4.1.ebuild
index 16ebf84a070..f1b275618c6 100644
--- a/media-gfx/cura/cura-3.4.1.ebuild
+++ b/media-gfx/cura/cura-3.4.1.ebuild
@@ -19,13 +19,15 @@ IUSE="+usb zeroconf"
REQUIRED_USE="${PYTHON_REQUIRED_USE}"
RDEPEND="${PYTHON_DEPS}
- >=dev-python/uranium-${PV:0:3}[${PYTHON_USEDEP}]
>=media-gfx/curaengine-${PV:0:3}
>=media-gfx/fdm-materials-${PV:0:3}
- >=dev-libs/libsavitar-${PV:0:3}:=[python,${PYTHON_USEDEP}]
- >=dev-libs/libcharon-${PV:0:3}[${PYTHON_USEDEP}]
- usb? ( dev-python/pyserial[${PYTHON_USEDEP}] )
- zeroconf? ( dev-python/zeroconf[${PYTHON_USEDEP}] )"
+ >=dev-libs/libsavitar-${PV:0:3}:=[python,${PYTHON_SINGLE_USEDEP}]
+ >=dev-libs/libcharon-${PV:0:3}[${PYTHON_SINGLE_USEDEP}]
+ >=dev-python/uranium-${PV:0:3}[${PYTHON_SINGLE_USEDEP}]
+ $(python_gen_cond_dep '
+ usb? ( dev-python/pyserial[${PYTHON_MULTI_USEDEP}] )
+ zeroconf? ( dev-python/zeroconf[${PYTHON_MULTI_USEDEP}] )
+ ')"
DEPEND="${RDEPEND}
sys-devel/gettext"
diff --git a/media-gfx/cura/cura-3.6.0.ebuild b/media-gfx/cura/cura-3.6.0.ebuild
index 16ebf84a070..f1b275618c6 100644
--- a/media-gfx/cura/cura-3.6.0.ebuild
+++ b/media-gfx/cura/cura-3.6.0.ebuild
@@ -19,13 +19,15 @@ IUSE="+usb zeroconf"
REQUIRED_USE="${PYTHON_REQUIRED_USE}"
RDEPEND="${PYTHON_DEPS}
- >=dev-python/uranium-${PV:0:3}[${PYTHON_USEDEP}]
>=media-gfx/curaengine-${PV:0:3}
>=media-gfx/fdm-materials-${PV:0:3}
- >=dev-libs/libsavitar-${PV:0:3}:=[python,${PYTHON_USEDEP}]
- >=dev-libs/libcharon-${PV:0:3}[${PYTHON_USEDEP}]
- usb? ( dev-python/pyserial[${PYTHON_USEDEP}] )
- zeroconf? ( dev-python/zeroconf[${PYTHON_USEDEP}] )"
+ >=dev-libs/libsavitar-${PV:0:3}:=[python,${PYTHON_SINGLE_USEDEP}]
+ >=dev-libs/libcharon-${PV:0:3}[${PYTHON_SINGLE_USEDEP}]
+ >=dev-python/uranium-${PV:0:3}[${PYTHON_SINGLE_USEDEP}]
+ $(python_gen_cond_dep '
+ usb? ( dev-python/pyserial[${PYTHON_MULTI_USEDEP}] )
+ zeroconf? ( dev-python/zeroconf[${PYTHON_MULTI_USEDEP}] )
+ ')"
DEPEND="${RDEPEND}
sys-devel/gettext"
diff --git a/media-gfx/cura/cura-4.2.1.ebuild b/media-gfx/cura/cura-4.2.1.ebuild
index ba1e9563f25..d72614d316d 100644
--- a/media-gfx/cura/cura-4.2.1.ebuild
+++ b/media-gfx/cura/cura-4.2.1.ebuild
@@ -20,13 +20,15 @@ REQUIRED_USE="${PYTHON_REQUIRED_USE}"
BDEPEND="sys-devel/gettext"
RDEPEND="${PYTHON_DEPS}
- >=dev-python/uranium-${PV:0:3}[${PYTHON_USEDEP}]
>=media-gfx/curaengine-${PV:0:3}
>=media-gfx/fdm-materials-${PV:0:3}
- >=dev-libs/libsavitar-${PV:0:3}:=[python,${PYTHON_USEDEP}]
- >=dev-libs/libcharon-${PV:0:3}[${PYTHON_USEDEP}]
- usb? ( dev-python/pyserial[${PYTHON_USEDEP}] )
- zeroconf? ( dev-python/zeroconf[${PYTHON_USEDEP}] )"
+ >=dev-libs/libsavitar-${PV:0:3}:=[python,${PYTHON_SINGLE_USEDEP}]
+ >=dev-libs/libcharon-${PV:0:3}[${PYTHON_SINGLE_USEDEP}]
+ >=dev-python/uranium-${PV:0:3}[${PYTHON_SINGLE_USEDEP}]
+ $(python_gen_cond_dep '
+ usb? ( dev-python/pyserial[${PYTHON_MULTI_USEDEP}] )
+ zeroconf? ( dev-python/zeroconf[${PYTHON_MULTI_USEDEP}] )
+ ')"
DEPEND="${RDEPEND}"
diff --git a/media-gfx/cura/cura-4.3.0.ebuild b/media-gfx/cura/cura-4.3.0-r1.ebuild
similarity index 77%
rename from media-gfx/cura/cura-4.3.0.ebuild
rename to media-gfx/cura/cura-4.3.0-r1.ebuild
index ba1e9563f25..d72614d316d 100644
--- a/media-gfx/cura/cura-4.3.0.ebuild
+++ b/media-gfx/cura/cura-4.3.0-r1.ebuild
@@ -20,13 +20,15 @@ REQUIRED_USE="${PYTHON_REQUIRED_USE}"
BDEPEND="sys-devel/gettext"
RDEPEND="${PYTHON_DEPS}
- >=dev-python/uranium-${PV:0:3}[${PYTHON_USEDEP}]
>=media-gfx/curaengine-${PV:0:3}
>=media-gfx/fdm-materials-${PV:0:3}
- >=dev-libs/libsavitar-${PV:0:3}:=[python,${PYTHON_USEDEP}]
- >=dev-libs/libcharon-${PV:0:3}[${PYTHON_USEDEP}]
- usb? ( dev-python/pyserial[${PYTHON_USEDEP}] )
- zeroconf? ( dev-python/zeroconf[${PYTHON_USEDEP}] )"
+ >=dev-libs/libsavitar-${PV:0:3}:=[python,${PYTHON_SINGLE_USEDEP}]
+ >=dev-libs/libcharon-${PV:0:3}[${PYTHON_SINGLE_USEDEP}]
+ >=dev-python/uranium-${PV:0:3}[${PYTHON_SINGLE_USEDEP}]
+ $(python_gen_cond_dep '
+ usb? ( dev-python/pyserial[${PYTHON_MULTI_USEDEP}] )
+ zeroconf? ( dev-python/zeroconf[${PYTHON_MULTI_USEDEP}] )
+ ')"
DEPEND="${RDEPEND}"
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2020-05-25 21:04 Alexey Shvetsov
0 siblings, 0 replies; 41+ messages in thread
From: Alexey Shvetsov @ 2020-05-25 21:04 UTC (permalink / raw
To: gentoo-commits
commit: 26c8af83fa3dbcdecb49a49612163fd5f3b718ed
Author: Alexey Shvetsov <alexxy <AT> gentoo <DOT> org>
AuthorDate: Mon May 25 21:03:19 2020 +0000
Commit: Alexey Shvetsov <alexxy <AT> gentoo <DOT> org>
CommitDate: Mon May 25 21:03:48 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=26c8af83
media-gfx/cura: works with py38
Package-Manager: Portage-2.3.100, Repoman-2.3.22
Signed-off-by: Alexey Shvetsov <alexxy <AT> gentoo.org>
media-gfx/cura/cura-4.6.1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/cura/cura-4.6.1.ebuild b/media-gfx/cura/cura-4.6.1.ebuild
index 4fd274514ca..c2d57876b25 100644
--- a/media-gfx/cura/cura-4.6.1.ebuild
+++ b/media-gfx/cura/cura-4.6.1.ebuild
@@ -3,7 +3,7 @@
EAPI=7
-PYTHON_COMPAT=( python3_{6,7} )
+PYTHON_COMPAT=( python3_{6,7,8} )
inherit cmake desktop python-single-r1 xdg
MY_PN=Cura
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2020-09-19 16:34 Sam James
0 siblings, 0 replies; 41+ messages in thread
From: Sam James @ 2020-09-19 16:34 UTC (permalink / raw
To: gentoo-commits
commit: 6e7dbd8ba16ee71dfdf831be2d81a3048ac4a4fd
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat Sep 19 16:31:49 2020 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat Sep 19 16:31:49 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=6e7dbd8b
media-gfx/cura: Keyword 4.6.1 arm64, #734826
Signed-off-by: Sam James <sam <AT> gentoo.org>
media-gfx/cura/cura-4.6.1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/cura/cura-4.6.1.ebuild b/media-gfx/cura/cura-4.6.1.ebuild
index c2d57876b25..bbd5d0b29de 100644
--- a/media-gfx/cura/cura-4.6.1.ebuild
+++ b/media-gfx/cura/cura-4.6.1.ebuild
@@ -14,7 +14,7 @@ SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${PV}.tar.gz -> ${P}.tar.
LICENSE="LGPL-3"
SLOT="0"
-KEYWORDS="~amd64 ~x86"
+KEYWORDS="~amd64 ~arm64 ~x86"
IUSE="+usb zeroconf"
REQUIRED_USE="${PYTHON_REQUIRED_USE}"
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2020-10-07 0:59 Sam James
0 siblings, 0 replies; 41+ messages in thread
From: Sam James @ 2020-10-07 0:59 UTC (permalink / raw
To: gentoo-commits
commit: b5ab283eeb1138e743831f3f04d29c04e58d9ecc
Author: D G Turner <digitall <AT> scummvm <DOT> org>
AuthorDate: Sat Sep 26 13:14:21 2020 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Wed Oct 7 00:34:21 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=b5ab283e
media-gfx/cura: Fix runtime crash at startup (4.6.1)
This needs to resolve the correct dependencies i.e. v4.6.1, not later
such as v4.7.0 as this will likely cause issues.
Signed-off-by: David G Turner <digitall <AT> scummvm.org>
Signed-off-by: Sam James <sam <AT> gentoo.org>
media-gfx/cura/{cura-4.6.1.ebuild => cura-4.6.1-r1.ebuild} | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/media-gfx/cura/cura-4.6.1.ebuild b/media-gfx/cura/cura-4.6.1-r1.ebuild
similarity index 83%
rename from media-gfx/cura/cura-4.6.1.ebuild
rename to media-gfx/cura/cura-4.6.1-r1.ebuild
index bbd5d0b29de..943f9305325 100644
--- a/media-gfx/cura/cura-4.6.1.ebuild
+++ b/media-gfx/cura/cura-4.6.1-r1.ebuild
@@ -20,11 +20,11 @@ REQUIRED_USE="${PYTHON_REQUIRED_USE}"
BDEPEND="sys-devel/gettext"
RDEPEND="${PYTHON_DEPS}
- >=dev-libs/libcharon-${PV:0:3}[${PYTHON_SINGLE_USEDEP}]
- >=dev-libs/libsavitar-${PV:0:3}:=[python,${PYTHON_SINGLE_USEDEP}]
- >=dev-python/uranium-${PV:0:3}[${PYTHON_SINGLE_USEDEP}]
- >=media-gfx/curaengine-${PV:0:3}
- >=media-gfx/fdm-materials-${PV:0:3}
+ ~dev-libs/libcharon-${PV}[${PYTHON_SINGLE_USEDEP}]
+ ~dev-libs/libsavitar-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
+ ~dev-python/uranium-${PV}[${PYTHON_SINGLE_USEDEP}]
+ ~media-gfx/curaengine-${PV}
+ ~media-gfx/fdm-materials-${PV}
$(python_gen_cond_dep '
dev-python/requests[${PYTHON_MULTI_USEDEP}]
dev-python/sentry-sdk[${PYTHON_MULTI_USEDEP}]
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2020-10-07 0:59 Sam James
0 siblings, 0 replies; 41+ messages in thread
From: Sam James @ 2020-10-07 0:59 UTC (permalink / raw
To: gentoo-commits
commit: 33357e01148d0e89c0396ab6ccb4bd620feda4af
Author: D G Turner <digitall <AT> scummvm <DOT> org>
AuthorDate: Sat Sep 26 16:21:32 2020 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Wed Oct 7 00:34:34 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=33357e01
media-gfx/cura: Add libarcus dependency directly (to 4.6.1)
This should really be a direct dependency ensuring the python use
flag is set as the sub-dependency does not enforce this is compatible
with the top level cura version.
Signed-off-by: David G Turner <digitall <AT> scummvm.org>
Signed-off-by: Sam James <sam <AT> gentoo.org>
media-gfx/cura/cura-4.6.1-r1.ebuild | 1 +
1 file changed, 1 insertion(+)
diff --git a/media-gfx/cura/cura-4.6.1-r1.ebuild b/media-gfx/cura/cura-4.6.1-r1.ebuild
index 943f9305325..4264d19b6a6 100644
--- a/media-gfx/cura/cura-4.6.1-r1.ebuild
+++ b/media-gfx/cura/cura-4.6.1-r1.ebuild
@@ -20,6 +20,7 @@ REQUIRED_USE="${PYTHON_REQUIRED_USE}"
BDEPEND="sys-devel/gettext"
RDEPEND="${PYTHON_DEPS}
+ ~dev-libs/libarcus-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
~dev-libs/libcharon-${PV}[${PYTHON_SINGLE_USEDEP}]
~dev-libs/libsavitar-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
~dev-python/uranium-${PV}[${PYTHON_SINGLE_USEDEP}]
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2020-10-07 0:59 Sam James
0 siblings, 0 replies; 41+ messages in thread
From: Sam James @ 2020-10-07 0:59 UTC (permalink / raw
To: gentoo-commits
commit: e941851f34335b4a5392890fc70a1c276c2a3da4
Author: D G Turner <digitall <AT> scummvm <DOT> org>
AuthorDate: Sat Sep 26 20:03:08 2020 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Wed Oct 7 00:35:15 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e941851f
media-gfx/cura: Bump to v4.7.0 ebuild
The other v4.7.0 dependencies i.e. curaengine-4.7.0, libcharon etc.
are already present in tree, so along with fdm-materials, this completes
the changes required to build cura v4.7.0
Signed-off-by: David G Turner <digitall <AT> scummvm.org>
Signed-off-by: Sam James <sam <AT> gentoo.org>
media-gfx/cura/Manifest | 1 +
media-gfx/cura/cura-4.7.0.ebuild | 57 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 58 insertions(+)
diff --git a/media-gfx/cura/Manifest b/media-gfx/cura/Manifest
index 0a4d6b2e883..aadc097a34d 100644
--- a/media-gfx/cura/Manifest
+++ b/media-gfx/cura/Manifest
@@ -3,3 +3,4 @@ DIST cura-3.6.0.tar.gz 23388945 BLAKE2B bd2f2e688306e7ef060141abae22c858e9fbb938
DIST cura-4.2.1.tar.gz 29288696 BLAKE2B 1332030e63d7056dcb8dd680208b0da8dd33e5c7809957779849bac808fccad9a222505ddbe80d4071474d10ace842aa4459f14560198a9f3eebb5be53f923e1 SHA512 4f47f3f5597d1a56d88207eacacece49edb766c75ae18ddc9fb8689b76c16fd4decc9c8af7cab485aac3c9cffe13095aaad34e1c60634249ae2923ead771ac52
DIST cura-4.3.0.tar.gz 30433646 BLAKE2B 8490d703cfd4ad07fd5b30d5f776d978baa17ad8751dad53870714596998becebc85cc2fe49fa05eab37b95106315ace97eaa0bbed65b488b522ebbbcba488dc SHA512 3f4ae11e4e28b151e9587c197f814bc97bc225fb2819f4dabaab392ef9896bb119d6fab0df48c9eb4a390a815815d27045eefa933e2e4a9d53331db8d79ea815
DIST cura-4.6.1.tar.gz 36080329 BLAKE2B 5d86734334a2c65afd62eea6b3324b0fc543670b48f5410eac16561590706feed2320c45b22e60c9835973f965a00f222280441daf44866ffc93ebcf1295c750 SHA512 8802993a98e75428d11bfdc7721d5d48e8939ef1c783789db2941cb40b6fc8014eacbdea09c559c6d68cb1dd99def15bfb503d5c164f057a384c8a7620b15dc2
+DIST cura-4.7.0.tar.gz 29712949 BLAKE2B b208a669aa38b07012099fe01ec453232c2bd3007befe649a4fd4cb0a0b12473762a5069d09218a3f2fe865141bbb8c8b7d5a26168fed02900abb20d78b0ad3f SHA512 0b3383042b9c8cf2ce27caee95c365be786c9eb40898c74ea4e0fb903241087e48a6e908d85635a9e43cf21ca3623098c6fe980d0cec3fc6a59c01c9c9cb4d9d
diff --git a/media-gfx/cura/cura-4.7.0.ebuild b/media-gfx/cura/cura-4.7.0.ebuild
new file mode 100644
index 00000000000..4264d19b6a6
--- /dev/null
+++ b/media-gfx/cura/cura-4.7.0.ebuild
@@ -0,0 +1,57 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+PYTHON_COMPAT=( python3_{6,7,8} )
+inherit cmake desktop python-single-r1 xdg
+
+MY_PN=Cura
+
+DESCRIPTION="A 3D model slicing application for 3D printing"
+HOMEPAGE="https://github.com/Ultimaker/Cura"
+SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${PV}.tar.gz -> ${P}.tar.gz"
+
+LICENSE="LGPL-3"
+SLOT="0"
+KEYWORDS="~amd64 ~arm64 ~x86"
+IUSE="+usb zeroconf"
+REQUIRED_USE="${PYTHON_REQUIRED_USE}"
+
+BDEPEND="sys-devel/gettext"
+RDEPEND="${PYTHON_DEPS}
+ ~dev-libs/libarcus-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
+ ~dev-libs/libcharon-${PV}[${PYTHON_SINGLE_USEDEP}]
+ ~dev-libs/libsavitar-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
+ ~dev-python/uranium-${PV}[${PYTHON_SINGLE_USEDEP}]
+ ~media-gfx/curaengine-${PV}
+ ~media-gfx/fdm-materials-${PV}
+ $(python_gen_cond_dep '
+ dev-python/requests[${PYTHON_MULTI_USEDEP}]
+ dev-python/sentry-sdk[${PYTHON_MULTI_USEDEP}]
+ usb? ( dev-python/pyserial[${PYTHON_MULTI_USEDEP}] )
+ zeroconf? ( dev-python/zeroconf[${PYTHON_MULTI_USEDEP}] )
+ ')"
+DEPEND="${RDEPEND}"
+
+DOCS=( README.md )
+PATCHES=( "${FILESDIR}/${PN}-4.6.1-fix-install-paths.patch" )
+S="${WORKDIR}/${MY_PN}-${PV}"
+
+src_prepare() {
+ sed -i "s/set(CURA_VERSION \"master\"/set(CURA_VERSION \"${PV}\"/" CMakeLists.txt || die
+ cmake_src_prepare
+}
+
+src_configure() {
+ local mycmakeargs=(
+ -DPYTHON_SITE_PACKAGES_DIR="$(python_get_sitedir)"
+ )
+ cmake_src_configure
+}
+
+src_install() {
+ cmake_src_install
+ doicon icons/*.png
+ python_optimize "${D}${get_libdir}"
+}
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2020-10-07 0:59 Sam James
0 siblings, 0 replies; 41+ messages in thread
From: Sam James @ 2020-10-07 0:59 UTC (permalink / raw
To: gentoo-commits
commit: 3d5a656f93fc84f7debca03b6accbfd2d35cebf7
Author: D G Turner <digitall <AT> scummvm <DOT> org>
AuthorDate: Mon Sep 28 19:04:32 2020 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Wed Oct 7 00:35:26 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=3d5a656f
media-gfx/cura: Drop ~arm64 from keywords (4.6.1)
libarcus and other dependencies are not keyworded as ~arm64 so
this would not build until these are resolved.
Signed-off-by: David G Turner <digitall <AT> scummvm.org>
Closes: https://github.com/gentoo/gentoo/pull/17679
Signed-off-by: Sam James <sam <AT> gentoo.org>
media-gfx/cura/cura-4.6.1-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/cura/cura-4.6.1-r1.ebuild b/media-gfx/cura/cura-4.6.1-r1.ebuild
index 4264d19b6a6..74ad049667a 100644
--- a/media-gfx/cura/cura-4.6.1-r1.ebuild
+++ b/media-gfx/cura/cura-4.6.1-r1.ebuild
@@ -14,7 +14,7 @@ SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${PV}.tar.gz -> ${P}.tar.
LICENSE="LGPL-3"
SLOT="0"
-KEYWORDS="~amd64 ~arm64 ~x86"
+KEYWORDS="~amd64 ~x86"
IUSE="+usb zeroconf"
REQUIRED_USE="${PYTHON_REQUIRED_USE}"
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2020-10-11 11:25 Dennis Lamm
0 siblings, 0 replies; 41+ messages in thread
From: Dennis Lamm @ 2020-10-11 11:25 UTC (permalink / raw
To: gentoo-commits
commit: 1171f18e35bb4beab4e6372046654ae880c2b905
Author: Dennis Lamm <expeditioneer <AT> gentoo <DOT> org>
AuthorDate: Sun Oct 11 10:14:10 2020 +0000
Commit: Dennis Lamm <expeditioneer <AT> gentoo <DOT> org>
CommitDate: Sun Oct 11 11:25:46 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=1171f18e
media-gfx/cura-4.7.0: fixed ModuleNotFoundError
Bug: https://bugs.gentoo.org/726426
Signed-off-by: Dennis Lamm <expeditoneer <AT> gentoo.org>
Signed-off-by: Dennis Lamm <expeditioneer <AT> gentoo.org>
media-gfx/cura/cura-4.7.0-r1.ebuild | 64 +++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/media-gfx/cura/cura-4.7.0-r1.ebuild b/media-gfx/cura/cura-4.7.0-r1.ebuild
new file mode 100644
index 00000000000..032d2437193
--- /dev/null
+++ b/media-gfx/cura/cura-4.7.0-r1.ebuild
@@ -0,0 +1,64 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+PYTHON_COMPAT=(python3_{6..8})
+inherit cmake desktop python-single-r1 xdg
+
+MY_PN=Cura
+
+DESCRIPTION="A 3D model slicing application for 3D printing"
+HOMEPAGE="https://github.com/Ultimaker/Cura"
+SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${PV}.tar.gz -> ${P}.tar.gz"
+
+LICENSE="LGPL-3"
+SLOT="0"
+KEYWORDS="~amd64 ~arm64 ~x86"
+IUSE="+usb zeroconf"
+REQUIRED_USE="${PYTHON_REQUIRED_USE}"
+
+BDEPEND="sys-devel/gettext"
+RDEPEND="${PYTHON_DEPS}
+ ~dev-libs/libarcus-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
+ ~dev-libs/libcharon-${PV}[${PYTHON_SINGLE_USEDEP}]
+ ~dev-libs/libsavitar-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
+ ~dev-python/uranium-${PV}[${PYTHON_SINGLE_USEDEP}]
+ ~media-gfx/curaengine-${PV}
+ ~media-gfx/fdm-materials-${PV}
+ $(python_gen_cond_dep '
+ dev-python/mypy[${PYTHON_MULTI_USEDEP}]
+ dev-python/numpy[${PYTHON_MULTI_USEDEP}]
+ dev-python/PyQt5[${PYTHON_MULTI_USEDEP}]
+ dev-python/requests[${PYTHON_MULTI_USEDEP}]
+ dev-python/sentry-sdk[${PYTHON_MULTI_USEDEP}]
+ sci-libs/Shapely[${PYTHON_MULTI_USEDEP}]
+ usb? ( dev-python/pyserial[${PYTHON_MULTI_USEDEP}] )
+ zeroconf? ( dev-python/zeroconf[${PYTHON_MULTI_USEDEP}] )
+ ')"
+DEPEND="${RDEPEND}"
+
+DOCS=(README.md)
+PATCHES=("${FILESDIR}/${PN}-4.6.1-fix-install-paths.patch")
+S="${WORKDIR}/${MY_PN}-${PV}"
+
+src_prepare() {
+ sed -i -e "s/set(CURA_VERSION \"master\"/set(CURA_VERSION \"${PV}\"/" CMakeLists.txt || die
+ cmake_src_prepare
+}
+
+src_configure() {
+ # trimesh not available in portage
+ local mycmakeargs=(
+ -DCURA_NO_INSTALL_PLUGINS="AMFReader;Toolbox;TrimeshReader"
+ -DPYTHON_SITE_PACKAGES_DIR="$(python_get_sitedir)"
+ )
+ cmake_src_configure
+}
+
+src_install() {
+ cmake_src_install
+ doicon icons/*.png
+ python_fix_shebang "${D}/usr/bin/cura"
+ python_optimize "${D}${get_libdir}"
+}
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2020-11-30 18:37 Dennis Lamm
0 siblings, 0 replies; 41+ messages in thread
From: Dennis Lamm @ 2020-11-30 18:37 UTC (permalink / raw
To: gentoo-commits
commit: 2b5dbf3fb7f2c44b9173e343f9afe883410e2932
Author: Dennis Lamm <expeditioneer <AT> gentoo <DOT> org>
AuthorDate: Mon Nov 30 05:52:01 2020 +0000
Commit: Dennis Lamm <expeditioneer <AT> gentoo <DOT> org>
CommitDate: Mon Nov 30 18:37:45 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=2b5dbf3f
media-gfx/cura: fixed QA warnings
Signed-off-by: Dennis Lamm <expeditoneer <AT> gentoo.org>
Signed-off-by: Dennis Lamm <expeditioneer <AT> gentoo.org>
media-gfx/cura/cura-4.8.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/cura/cura-4.8.0.ebuild b/media-gfx/cura/cura-4.8.0.ebuild
index cac723768e0..615180db9ee 100644
--- a/media-gfx/cura/cura-4.8.0.ebuild
+++ b/media-gfx/cura/cura-4.8.0.ebuild
@@ -3,7 +3,7 @@
EAPI=7
-PYTHON_COMPAT=(python3_{6..8})
+PYTHON_COMPAT=(python3_{7..8})
inherit cmake desktop python-single-r1 xdg
MY_PN=Cura
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2020-11-30 18:37 Dennis Lamm
0 siblings, 0 replies; 41+ messages in thread
From: Dennis Lamm @ 2020-11-30 18:37 UTC (permalink / raw
To: gentoo-commits
commit: 4aeeb63fc98b2fe953777627b25e1a769110f11a
Author: Dennis Lamm <expeditioneer <AT> gentoo <DOT> org>
AuthorDate: Sun Nov 29 18:57:30 2020 +0000
Commit: Dennis Lamm <expeditioneer <AT> gentoo <DOT> org>
CommitDate: Mon Nov 30 18:37:43 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=4aeeb63f
media-gfx/cura: bump to 4.8.0
Signed-off-by: Dennis Lamm <expeditoneer <AT> gentoo.org>
Signed-off-by: Dennis Lamm <expeditioneer <AT> gentoo.org>
media-gfx/cura/Manifest | 1 +
media-gfx/cura/cura-4.8.0.ebuild | 67 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 68 insertions(+)
diff --git a/media-gfx/cura/Manifest b/media-gfx/cura/Manifest
index 8e2e7103861..96afac35472 100644
--- a/media-gfx/cura/Manifest
+++ b/media-gfx/cura/Manifest
@@ -1,2 +1,3 @@
DIST cura-4.6.1.tar.gz 36080329 BLAKE2B 5d86734334a2c65afd62eea6b3324b0fc543670b48f5410eac16561590706feed2320c45b22e60c9835973f965a00f222280441daf44866ffc93ebcf1295c750 SHA512 8802993a98e75428d11bfdc7721d5d48e8939ef1c783789db2941cb40b6fc8014eacbdea09c559c6d68cb1dd99def15bfb503d5c164f057a384c8a7620b15dc2
DIST cura-4.7.0.tar.gz 29712949 BLAKE2B b208a669aa38b07012099fe01ec453232c2bd3007befe649a4fd4cb0a0b12473762a5069d09218a3f2fe865141bbb8c8b7d5a26168fed02900abb20d78b0ad3f SHA512 0b3383042b9c8cf2ce27caee95c365be786c9eb40898c74ea4e0fb903241087e48a6e908d85635a9e43cf21ca3623098c6fe980d0cec3fc6a59c01c9c9cb4d9d
+DIST cura-4.8.0.tar.gz 31930258 BLAKE2B 0a10a03f5fa34ec0279b9476063f71d8ae904e05485b84fac011fa5061812cd74f4be6df7e6d93046365799fc2fb1bcf4d10d89c69d2c8455080f99c12cec153 SHA512 0a34438299908021242e47e74418e56fe61c41cff5c29df938b4705b5d23ceb6e1bd17b9eb8110f8ec75c7a08afe8928857d4f2fd5befa00c187bce717105711
diff --git a/media-gfx/cura/cura-4.8.0.ebuild b/media-gfx/cura/cura-4.8.0.ebuild
new file mode 100644
index 00000000000..cac723768e0
--- /dev/null
+++ b/media-gfx/cura/cura-4.8.0.ebuild
@@ -0,0 +1,67 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+PYTHON_COMPAT=(python3_{6..8})
+inherit cmake desktop python-single-r1 xdg
+
+MY_PN=Cura
+
+DESCRIPTION="A 3D model slicing application for 3D printing"
+HOMEPAGE="https://github.com/Ultimaker/Cura"
+SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${PV}.tar.gz -> ${P}.tar.gz"
+
+LICENSE="LGPL-3"
+SLOT="0"
+KEYWORDS="~amd64 ~arm64 ~x86"
+IUSE="debug +usb zeroconf"
+REQUIRED_USE="${PYTHON_REQUIRED_USE}"
+
+BDEPEND="sys-devel/gettext"
+RDEPEND="${PYTHON_DEPS}
+ ~dev-libs/libarcus-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
+ ~dev-libs/libcharon-${PV}[${PYTHON_SINGLE_USEDEP}]
+ ~dev-libs/libsavitar-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
+ ~dev-python/pynest2d-${PV}[${PYTHON_SINGLE_USEDEP}]
+ ~dev-python/uranium-${PV}[${PYTHON_SINGLE_USEDEP}]
+ ~media-gfx/curaengine-${PV}
+ ~media-gfx/fdm-materials-${PV}
+ $(python_gen_cond_dep '
+ dev-python/mypy[${PYTHON_MULTI_USEDEP}]
+ dev-python/numpy[${PYTHON_MULTI_USEDEP}]
+ dev-python/PyQt5[${PYTHON_MULTI_USEDEP}]
+ dev-python/requests[${PYTHON_MULTI_USEDEP}]
+ dev-python/sentry-sdk[${PYTHON_MULTI_USEDEP}]
+ sci-libs/shapely[${PYTHON_MULTI_USEDEP}]
+ usb? ( dev-python/pyserial[${PYTHON_MULTI_USEDEP}] )
+ zeroconf? ( dev-python/zeroconf[${PYTHON_MULTI_USEDEP}] )
+ ')"
+DEPEND="${RDEPEND}"
+
+DOCS=(README.md)
+S="${WORKDIR}/${MY_PN}-${PV}"
+
+src_prepare() {
+ sed -i -e "s:lib\${LIB_SUFFIX}/python\${Python3_VERSION_MAJOR}.\${Python3_VERSION_MINOR}/site-packages:$(python_get_sitedir):g" CMakeLists.txt || die
+
+ cmake_src_prepare
+}
+
+src_configure() {
+ # trimesh not available in portage
+ local mycmakeargs=(
+ -DCURA_BUILDTYPE="ebuild"
+ -DCURA_VERSION=${PV}
+ -DCURA_NO_INSTALL_PLUGINS="AMFReader;Toolbox;TrimeshReader"
+ -DCURA_DEBUGMODE=$(usex debug)
+ )
+ cmake_src_configure
+}
+
+src_install() {
+ cmake_src_install
+ doicon icons/*.png
+ python_fix_shebang "${D}/usr/bin/cura"
+ python_optimize "${D}${get_libdir}"
+}
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2020-11-30 18:37 Dennis Lamm
0 siblings, 0 replies; 41+ messages in thread
From: Dennis Lamm @ 2020-11-30 18:37 UTC (permalink / raw
To: gentoo-commits
commit: ea84b7ac1ed4dbc0e15a6df7002be1df1fa6e620
Author: Dennis Lamm <expeditioneer <AT> gentoo <DOT> org>
AuthorDate: Mon Nov 30 17:20:28 2020 +0000
Commit: Dennis Lamm <expeditioneer <AT> gentoo <DOT> org>
CommitDate: Mon Nov 30 18:37:46 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ea84b7ac
media-gfx/cura: dropped ~arm64 keyword
Signed-off-by: Dennis Lamm <expeditoneer <AT> gentoo.org>
Closes: https://github.com/gentoo/gentoo/pull/18450
Signed-off-by: Dennis Lamm <expeditioneer <AT> gentoo.org>
media-gfx/cura/cura-4.8.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/cura/cura-4.8.0.ebuild b/media-gfx/cura/cura-4.8.0.ebuild
index 615180db9ee..c1e24966841 100644
--- a/media-gfx/cura/cura-4.8.0.ebuild
+++ b/media-gfx/cura/cura-4.8.0.ebuild
@@ -14,7 +14,7 @@ SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${PV}.tar.gz -> ${P}.tar.
LICENSE="LGPL-3"
SLOT="0"
-KEYWORDS="~amd64 ~arm64 ~x86"
+KEYWORDS="~amd64 ~x86"
IUSE="debug +usb zeroconf"
REQUIRED_USE="${PYTHON_REQUIRED_USE}"
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2020-12-14 0:46 Sam James
0 siblings, 0 replies; 41+ messages in thread
From: Sam James @ 2020-12-14 0:46 UTC (permalink / raw
To: gentoo-commits
commit: 86a63b0ac0ca32cd3a6c9311736fd58e11cbbb67
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Mon Dec 14 00:45:40 2020 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Mon Dec 14 00:45:40 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=86a63b0a
media-gfx/cura: arm64 keyworded (bug #757849)
Package-Manager: Portage-3.0.9, Repoman-3.0.2
Signed-off-by: Sam James <sam <AT> gentoo.org>
media-gfx/cura/cura-4.8.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/cura/cura-4.8.0.ebuild b/media-gfx/cura/cura-4.8.0.ebuild
index c1e24966841..615180db9ee 100644
--- a/media-gfx/cura/cura-4.8.0.ebuild
+++ b/media-gfx/cura/cura-4.8.0.ebuild
@@ -14,7 +14,7 @@ SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${PV}.tar.gz -> ${P}.tar.
LICENSE="LGPL-3"
SLOT="0"
-KEYWORDS="~amd64 ~x86"
+KEYWORDS="~amd64 ~arm64 ~x86"
IUSE="debug +usb zeroconf"
REQUIRED_USE="${PYTHON_REQUIRED_USE}"
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2021-02-07 23:57 Dennis Lamm
0 siblings, 0 replies; 41+ messages in thread
From: Dennis Lamm @ 2021-02-07 23:57 UTC (permalink / raw
To: gentoo-commits
commit: c82706de9ed4ab875a772671ee8325985f576ced
Author: Dennis Lamm <expeditioneer <AT> gentoo <DOT> org>
AuthorDate: Sun Feb 7 20:56:32 2021 +0000
Commit: Dennis Lamm <expeditioneer <AT> gentoo <DOT> org>
CommitDate: Sun Feb 7 23:56:53 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c82706de
media-gfx/cura: metadata added upstream bugtracker
Signed-off-by: Dennis Lamm <expeditioneer <AT> gentoo.org>
media-gfx/cura/metadata.xml | 1 +
1 file changed, 1 insertion(+)
diff --git a/media-gfx/cura/metadata.xml b/media-gfx/cura/metadata.xml
index 19761d81848..b9e0e481f08 100644
--- a/media-gfx/cura/metadata.xml
+++ b/media-gfx/cura/metadata.xml
@@ -28,6 +28,7 @@
<flag name="usb">Access 3D printers via USB</flag>
</use>
<upstream>
+ <bugs-to>https://github.com/Ultimaker/Cura/issues</bugs-to>
<remote-id type="github">Ultimaker/Cura</remote-id>
</upstream>
</pkgmetadata>
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2021-02-07 23:57 Dennis Lamm
0 siblings, 0 replies; 41+ messages in thread
From: Dennis Lamm @ 2021-02-07 23:57 UTC (permalink / raw
To: gentoo-commits
commit: 2295f8da891fa865655c32ecb58d4c0f5e7b5e46
Author: Dennis Lamm <expeditioneer <AT> gentoo <DOT> org>
AuthorDate: Sun Feb 7 21:00:29 2021 +0000
Commit: Dennis Lamm <expeditioneer <AT> gentoo <DOT> org>
CommitDate: Sun Feb 7 23:56:53 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=2295f8da
media-gfx/cura: metadata added doc
Signed-off-by: Dennis Lamm <expeditioneer <AT> gentoo.org>
media-gfx/cura/metadata.xml | 1 +
1 file changed, 1 insertion(+)
diff --git a/media-gfx/cura/metadata.xml b/media-gfx/cura/metadata.xml
index b9e0e481f08..615b4b60345 100644
--- a/media-gfx/cura/metadata.xml
+++ b/media-gfx/cura/metadata.xml
@@ -29,6 +29,7 @@
</use>
<upstream>
<bugs-to>https://github.com/Ultimaker/Cura/issues</bugs-to>
+ <doc>https://github.com/Ultimaker/Cura/wiki</doc>
<remote-id type="github">Ultimaker/Cura</remote-id>
</upstream>
</pkgmetadata>
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2021-06-10 17:41 Dennis Lamm
0 siblings, 0 replies; 41+ messages in thread
From: Dennis Lamm @ 2021-06-10 17:41 UTC (permalink / raw
To: gentoo-commits
commit: a32c3cd7e73ebc0f1febc56abdf40944cc9ef506
Author: Mathy Vanvoorden <mathy <AT> vanvoorden <DOT> be>
AuthorDate: Mon Jun 7 16:02:52 2021 +0000
Commit: Dennis Lamm <expeditioneer <AT> gentoo <DOT> org>
CommitDate: Thu Jun 10 17:40:52 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a32c3cd7
media-gfx/cura: Version bump to 4.9.1
Closes: https://bugs.gentoo.org/793803
Closes: https://bugs.gentoo.org/731274
Package-Manager: Portage-3.0.19, Repoman-3.0.3
Signed-off-by: Mathy Vanvoorden <mathy <AT> vanvoorden.be>
Closes: https://github.com/gentoo/gentoo/pull/21150
Signed-off-by: Dennis Lamm <expeditioneer <AT> gentoo.org>
media-gfx/cura/Manifest | 1 +
media-gfx/cura/cura-4.9.1.ebuild | 71 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 72 insertions(+)
diff --git a/media-gfx/cura/Manifest b/media-gfx/cura/Manifest
index 5dfea09d774..f77b0cbd1af 100644
--- a/media-gfx/cura/Manifest
+++ b/media-gfx/cura/Manifest
@@ -1 +1,2 @@
DIST cura-4.8.0.tar.gz 31930258 BLAKE2B 0a10a03f5fa34ec0279b9476063f71d8ae904e05485b84fac011fa5061812cd74f4be6df7e6d93046365799fc2fb1bcf4d10d89c69d2c8455080f99c12cec153 SHA512 0a34438299908021242e47e74418e56fe61c41cff5c29df938b4705b5d23ceb6e1bd17b9eb8110f8ec75c7a08afe8928857d4f2fd5befa00c187bce717105711
+DIST cura-4.9.1.tar.gz 47870392 BLAKE2B 2471c8461f73ad2343f4c3315994c5f63781ae1e49cb4699cd66e7e77c25a93916931fbaa6598c4144707dbc7778c902dad3a25839c0523aaf51ed39aacd2463 SHA512 436b8e33514de67d6d680fe59ab9599a75a86caa7e63fbcd05297b12a435483ec0c9ca90557fe23f25590a24e533294915fc18a665fd5cdb77fcc3a05a9076bf
diff --git a/media-gfx/cura/cura-4.9.1.ebuild b/media-gfx/cura/cura-4.9.1.ebuild
new file mode 100644
index 00000000000..8c8c80d0005
--- /dev/null
+++ b/media-gfx/cura/cura-4.9.1.ebuild
@@ -0,0 +1,71 @@
+# Copyright 1999-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+PYTHON_COMPAT=(python3_{7..9})
+inherit cmake desktop python-single-r1 xdg
+
+MY_PN=Cura
+
+DESCRIPTION="A 3D model slicing application for 3D printing"
+HOMEPAGE="https://github.com/Ultimaker/Cura"
+SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${PV}.tar.gz -> ${P}.tar.gz"
+
+LICENSE="LGPL-3"
+SLOT="0"
+KEYWORDS="~amd64 ~arm64 ~x86"
+IUSE="debug +usb zeroconf"
+REQUIRED_USE="${PYTHON_REQUIRED_USE}"
+
+BDEPEND="sys-devel/gettext"
+RDEPEND="${PYTHON_DEPS}
+ ~dev-libs/libarcus-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
+ ~dev-libs/libcharon-${PV}[${PYTHON_SINGLE_USEDEP}]
+ ~dev-libs/libsavitar-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
+ ~dev-python/pynest2d-${PV}[${PYTHON_SINGLE_USEDEP}]
+ ~dev-python/uranium-${PV}[${PYTHON_SINGLE_USEDEP}]
+ ~media-gfx/curaengine-${PV}
+ ~media-gfx/fdm-materials-${PV}
+ dev-qt/qtquickcontrols[widgets]
+ $(python_gen_cond_dep '
+ dev-python/importlib_metadata[${PYTHON_MULTI_USEDEP}]
+ dev-python/keyring[${PYTHON_MULTI_USEDEP}]
+ dev-python/mypy[${PYTHON_MULTI_USEDEP}]
+ dev-python/numpy[${PYTHON_MULTI_USEDEP}]
+ dev-python/PyQt5[-debug,${PYTHON_MULTI_USEDEP}]
+ dev-python/PyQt5-sip[${PYTHON_MULTI_USEDEP}]
+ dev-python/requests[${PYTHON_MULTI_USEDEP}]
+ dev-python/sentry-sdk[${PYTHON_MULTI_USEDEP}]
+ sci-libs/shapely[${PYTHON_MULTI_USEDEP}]
+ usb? ( dev-python/pyserial[${PYTHON_MULTI_USEDEP}] )
+ zeroconf? ( dev-python/zeroconf[${PYTHON_MULTI_USEDEP}] )
+ ')"
+DEPEND="${RDEPEND}"
+
+DOCS=(README.md)
+S="${WORKDIR}/${MY_PN}-${PV}"
+
+src_prepare() {
+ sed -i -e "s:lib\${LIB_SUFFIX}/python\${Python3_VERSION_MAJOR}.\${Python3_VERSION_MINOR}/site-packages:$(python_get_sitedir):g" CMakeLists.txt || die
+
+ cmake_src_prepare
+}
+
+src_configure() {
+ # trimesh not available in portage
+ local mycmakeargs=(
+ -DCURA_BUILDTYPE="ebuild"
+ -DCURA_VERSION=${PV}
+ -DCURA_NO_INSTALL_PLUGINS="AMFReader;Toolbox;TrimeshReader"
+ -DCURA_DEBUGMODE=$(usex debug)
+ )
+ cmake_src_configure
+}
+
+src_install() {
+ cmake_src_install
+ doicon icons/*.png
+ python_fix_shebang "${D}/usr/bin/cura"
+ python_optimize "${D}${get_libdir}"
+}
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2021-11-10 19:44 Jonas Stein
0 siblings, 0 replies; 41+ messages in thread
From: Jonas Stein @ 2021-11-10 19:44 UTC (permalink / raw
To: gentoo-commits
commit: 680251cbf9b19c8c6cf49931fe217344f4f05924
Author: Jonas Stein <jstein <AT> gentoo <DOT> org>
AuthorDate: Wed Nov 10 19:43:51 2021 +0000
Commit: Jonas Stein <jstein <AT> gentoo <DOT> org>
CommitDate: Wed Nov 10 19:43:51 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=680251cb
media-gfx/cura: Sort maintainers
Move proxy to the end.
Package-Manager: Portage-3.0.28, Repoman-3.0.3
Signed-off-by: Jonas Stein <jstein <AT> gentoo.org>
media-gfx/cura/metadata.xml | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/media-gfx/cura/metadata.xml b/media-gfx/cura/metadata.xml
index ae6a4e00a4f..6bf1b5a4e99 100644
--- a/media-gfx/cura/metadata.xml
+++ b/media-gfx/cura/metadata.xml
@@ -9,10 +9,6 @@
<email>alexxy@gentoo.org</email>
<name>Alexey Shvetsov</name>
</maintainer>
- <maintainer type="project" proxied="proxy">
- <email>proxy-maint@gentoo.org</email>
- <name>Proxy Maintainers</name>
- </maintainer>
<maintainer type="person" proxied="yes">
<email>mathy@vanvoorden.be</email>
<name>Mathy Vanvoorden</name>
@@ -21,6 +17,10 @@
<email>perlovka@gmail.com</email>
<name>Michael Perlov</name>
</maintainer>
+ <maintainer type="project" proxied="proxy">
+ <email>proxy-maint@gentoo.org</email>
+ <name>Proxy Maintainers</name>
+ </maintainer>
<slots>
<subslots>soname major version number</subslots>
</slots>
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2022-02-11 20:25 Arthur Zamarin
0 siblings, 0 replies; 41+ messages in thread
From: Arthur Zamarin @ 2022-02-11 20:25 UTC (permalink / raw
To: gentoo-commits
commit: 75d1fc6afc7b9089647f0430aa4f8752a63e0bf2
Author: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
AuthorDate: Fri Feb 11 20:25:08 2022 +0000
Commit: Arthur Zamarin <arthurzam <AT> gentoo <DOT> org>
CommitDate: Fri Feb 11 20:25:08 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=75d1fc6a
media-gfx/cura: Keyword 4.12.1 arm64, #833120
Signed-off-by: Arthur Zamarin <arthurzam <AT> gentoo.org>
media-gfx/cura/cura-4.12.1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/cura/cura-4.12.1.ebuild b/media-gfx/cura/cura-4.12.1.ebuild
index 7c12eee664b8..407caa7c29df 100644
--- a/media-gfx/cura/cura-4.12.1.ebuild
+++ b/media-gfx/cura/cura-4.12.1.ebuild
@@ -17,7 +17,7 @@ SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${PV}.tar.gz -> ${P}.tar.
LICENSE="LGPL-3"
SLOT="0"
-KEYWORDS="~amd64"
+KEYWORDS="~amd64 ~arm64"
IUSE="debug +usb zeroconf"
REQUIRED_USE="${PYTHON_REQUIRED_USE}"
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2022-02-13 22:38 Jakov Smolić
0 siblings, 0 replies; 41+ messages in thread
From: Jakov Smolić @ 2022-02-13 22:38 UTC (permalink / raw
To: gentoo-commits
commit: 9d7fa14e0e7cc37513ca6b495e96e8a6e4ba9bb1
Author: Jakov Smolić <jsmolic <AT> gentoo <DOT> org>
AuthorDate: Sun Feb 13 22:38:35 2022 +0000
Commit: Jakov Smolić <jsmolic <AT> gentoo <DOT> org>
CommitDate: Sun Feb 13 22:38:35 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=9d7fa14e
media-gfx/cura: Keyword 4.12.1 x86, #833120
Signed-off-by: Jakov Smolić <jsmolic <AT> gentoo.org>
media-gfx/cura/cura-4.12.1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/cura/cura-4.12.1.ebuild b/media-gfx/cura/cura-4.12.1.ebuild
index 407caa7c29df..f38aa921e53b 100644
--- a/media-gfx/cura/cura-4.12.1.ebuild
+++ b/media-gfx/cura/cura-4.12.1.ebuild
@@ -17,7 +17,7 @@ SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${PV}.tar.gz -> ${P}.tar.
LICENSE="LGPL-3"
SLOT="0"
-KEYWORDS="~amd64 ~arm64"
+KEYWORDS="~amd64 ~arm64 ~x86"
IUSE="debug +usb zeroconf"
REQUIRED_USE="${PYTHON_REQUIRED_USE}"
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2022-02-28 19:43 Matthew Smith
0 siblings, 0 replies; 41+ messages in thread
From: Matthew Smith @ 2022-02-28 19:43 UTC (permalink / raw
To: gentoo-commits
commit: a282b3d47a732dbaf680c3f2d71255f9abbffa26
Author: Matthew Smith <matthew <AT> gentoo <DOT> org>
AuthorDate: Mon Feb 28 18:51:15 2022 +0000
Commit: Matthew Smith <matthew <AT> gentoo <DOT> org>
CommitDate: Mon Feb 28 19:42:49 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a282b3d4
media-gfx/cura: fix failing tests
Add a dependency on pytest and remove a test that either does not like
the sandbox or does not like its home directory being moved.
Closes: https://bugs.gentoo.org/693172
Signed-off-by: Matthew Smith <matthew <AT> gentoo.org>
media-gfx/cura/cura-4.12.1.ebuild | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/media-gfx/cura/cura-4.12.1.ebuild b/media-gfx/cura/cura-4.12.1.ebuild
index f38aa921e53b..448cf753c799 100644
--- a/media-gfx/cura/cura-4.12.1.ebuild
+++ b/media-gfx/cura/cura-4.12.1.ebuild
@@ -18,10 +18,17 @@ SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${PV}.tar.gz -> ${P}.tar.
LICENSE="LGPL-3"
SLOT="0"
KEYWORDS="~amd64 ~arm64 ~x86"
-IUSE="debug +usb zeroconf"
+IUSE="debug test +usb zeroconf"
REQUIRED_USE="${PYTHON_REQUIRED_USE}"
-BDEPEND="sys-devel/gettext"
+RESTRICT="!test? ( test )"
+
+BDEPEND="${PYTHON_DEPS}
+ sys-devel/gettext
+ $(python_gen_cond_dep '
+ test? ( dev-python/pytest[${PYTHON_USEDEP}] )
+ ')
+"
RDEPEND="${PYTHON_DEPS}
~dev-libs/libarcus-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
~dev-libs/libcharon-${PV}[${PYTHON_SINGLE_USEDEP}]
@@ -57,6 +64,9 @@ S="${WORKDIR}/${MY_PN}-${PV}"
src_prepare() {
sed -i -e "s:lib\${LIB_SUFFIX}/python\${Python3_VERSION_MAJOR}.\${Python3_VERSION_MINOR}/site-packages:$(python_get_sitedir):g" CMakeLists.txt || die
+ # Remove failing test. Bug #693172.
+ rm -r plugins/VersionUpgrade/VersionUpgrade44to45/tests || die
+
cmake_src_prepare
}
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2022-02-28 19:43 Matthew Smith
0 siblings, 0 replies; 41+ messages in thread
From: Matthew Smith @ 2022-02-28 19:43 UTC (permalink / raw
To: gentoo-commits
commit: 0baf298926214c7b14f47b6fd34c45ea0d5077d6
Author: Matthew Smith <matthew <AT> gentoo <DOT> org>
AuthorDate: Mon Feb 28 19:41:20 2022 +0000
Commit: Matthew Smith <matthew <AT> gentoo <DOT> org>
CommitDate: Mon Feb 28 19:43:19 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=0baf2989
media-gfx/cura: add 4.13.0
Signed-off-by: Matthew Smith <matthew <AT> gentoo.org>
media-gfx/cura/Manifest | 1 +
media-gfx/cura/cura-4.13.0.ebuild | 86 +++++++++++++++++++++++++++++++++++++++
2 files changed, 87 insertions(+)
diff --git a/media-gfx/cura/Manifest b/media-gfx/cura/Manifest
index 66fb25368e66..7ed2fd162fb3 100644
--- a/media-gfx/cura/Manifest
+++ b/media-gfx/cura/Manifest
@@ -1,2 +1,3 @@
DIST cura-4.12.1.tar.gz 50021408 BLAKE2B 114bbe0cc022e33125486228db2eeaeacd9f4abeac8e65f3ed70231e05f4429062ce1cd49e1649959beb827b7a2d245f61c106529a18bd0cebbd0e8b9b8f883f SHA512 397048e1ed93d2e3ec326a3b0564db2b6ee2b239843346e2dd44470b11b5aea86f3f519534270789e020261c87a0100bf3bba39ddbd3a1d8be0e38e68fd7e0c0
+DIST cura-4.13.0.tar.gz 42339276 BLAKE2B 05e747b8e84ecf64bdc1ad7662eae7b5e8a739b7c1bbafdd3ae081e790dafbcd98209eb90f45996e93115ea8b7a38764be957091dd358c502e7aa71cb61fe6c7 SHA512 46f13cde12735d64dad2c533c7688612ebc1c2c8b78d71ced8cfd7d7abd80a53c09105bb16f64ae92cddf345fe44f83800d4448007fe5c2938c652f58354747b
DIST cura-4.9.1.tar.gz 47870392 BLAKE2B 2471c8461f73ad2343f4c3315994c5f63781ae1e49cb4699cd66e7e77c25a93916931fbaa6598c4144707dbc7778c902dad3a25839c0523aaf51ed39aacd2463 SHA512 436b8e33514de67d6d680fe59ab9599a75a86caa7e63fbcd05297b12a435483ec0c9ca90557fe23f25590a24e533294915fc18a665fd5cdb77fcc3a05a9076bf
diff --git a/media-gfx/cura/cura-4.13.0.ebuild b/media-gfx/cura/cura-4.13.0.ebuild
new file mode 100644
index 000000000000..805c67fdd48c
--- /dev/null
+++ b/media-gfx/cura/cura-4.13.0.ebuild
@@ -0,0 +1,86 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+PYTHON_COMPAT=( python3_{8..10} )
+
+inherit cmake desktop python-single-r1 xdg
+
+# Never got tagged as 4.13 proper.
+PYNEST2D_PV=4.13_beta
+
+DESCRIPTION="A 3D model slicing application for 3D printing"
+HOMEPAGE="https://github.com/Ultimaker/Cura"
+SRC_URI="https://github.com/Ultimaker/${PN}/archive/${PV}.tar.gz -> ${P}.tar.gz"
+
+LICENSE="LGPL-3"
+SLOT="0"
+KEYWORDS="~amd64 ~arm64 ~x86"
+IUSE="debug test +usb zeroconf"
+REQUIRED_USE="${PYTHON_REQUIRED_USE}"
+
+RESTRICT="!test? ( test )"
+
+BDEPEND="${PYTHON_DEPS}
+ sys-devel/gettext
+ $(python_gen_cond_dep '
+ test? ( dev-python/pytest[${PYTHON_USEDEP}] )
+ ')
+"
+RDEPEND="${PYTHON_DEPS}
+ ~dev-libs/libarcus-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
+ ~dev-libs/libcharon-${PV}[${PYTHON_SINGLE_USEDEP}]
+ ~dev-libs/libsavitar-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
+ ~dev-python/pynest2d-${PYNEST2D_PV}[${PYTHON_SINGLE_USEDEP}]
+ ~dev-python/uranium-${PV}[${PYTHON_SINGLE_USEDEP}]
+ ~media-gfx/curaengine-${PV}
+ ~media-gfx/fdm-materials-${PV}
+ dev-qt/qtquickcontrols[widgets]
+ $(python_gen_cond_dep '
+ dev-python/importlib_metadata[${PYTHON_USEDEP}]
+ dev-python/keyring[${PYTHON_USEDEP}]
+ dev-python/mypy[${PYTHON_USEDEP}]
+ dev-python/numpy[${PYTHON_USEDEP}]
+ dev-python/PyQt5[-debug,${PYTHON_USEDEP}]
+ dev-python/PyQt5-sip[${PYTHON_USEDEP}]
+ dev-python/requests[${PYTHON_USEDEP}]
+ dev-python/sentry-sdk[${PYTHON_USEDEP}]
+ dev-python/trimesh[${PYTHON_USEDEP}]
+ sci-libs/shapely[${PYTHON_USEDEP}]
+ usb? ( dev-python/pyserial[${PYTHON_USEDEP}] )
+ zeroconf? ( dev-python/zeroconf[${PYTHON_USEDEP}] )
+ ')"
+DEPEND="${RDEPEND}"
+
+PATCHES=(
+ "${FILESDIR}"/${PN}-4.12.1-code-style-test.patch
+)
+
+DOCS=( README.md )
+S="${WORKDIR}"/Cura-${PV}
+
+src_prepare() {
+ sed -i -e "s:lib\${LIB_SUFFIX}/python\${Python3_VERSION_MAJOR}.\${Python3_VERSION_MINOR}/site-packages:$(python_get_sitedir):g" CMakeLists.txt || die
+
+ # Remove failing test. Bug #693172.
+ rm -r plugins/VersionUpgrade/VersionUpgrade44to45/tests || die
+
+ cmake_src_prepare
+}
+
+src_configure() {
+ local mycmakeargs=(
+ -DCURA_BUILDTYPE="ebuild"
+ -DCURA_VERSION=${PV}
+ -DCURA_DEBUGMODE=$(usex debug)
+ )
+ cmake_src_configure
+}
+
+src_install() {
+ cmake_src_install
+ doicon icons/*.png
+ python_fix_shebang "${D}/usr/bin/cura"
+ python_optimize "${D}${get_libdir}"
+}
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2022-03-05 11:54 Matthew Smith
0 siblings, 0 replies; 41+ messages in thread
From: Matthew Smith @ 2022-03-05 11:54 UTC (permalink / raw
To: gentoo-commits
commit: bc42726ffedfd02a080a2b281d031c1a4b26783e
Author: Matthew Smith <matthew <AT> gentoo <DOT> org>
AuthorDate: Sat Mar 5 11:35:29 2022 +0000
Commit: Matthew Smith <matthew <AT> gentoo <DOT> org>
CommitDate: Sat Mar 5 11:53:40 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=bc42726f
media-gfx/cura: add 4.13.1
Signed-off-by: Matthew Smith <matthew <AT> gentoo.org>
media-gfx/cura/Manifest | 1 +
media-gfx/cura/cura-4.13.1.ebuild | 89 +++++++++++++++++++++++++++++++++++++++
2 files changed, 90 insertions(+)
diff --git a/media-gfx/cura/Manifest b/media-gfx/cura/Manifest
index 7ed2fd162fb3..a2ac1372708b 100644
--- a/media-gfx/cura/Manifest
+++ b/media-gfx/cura/Manifest
@@ -1,3 +1,4 @@
DIST cura-4.12.1.tar.gz 50021408 BLAKE2B 114bbe0cc022e33125486228db2eeaeacd9f4abeac8e65f3ed70231e05f4429062ce1cd49e1649959beb827b7a2d245f61c106529a18bd0cebbd0e8b9b8f883f SHA512 397048e1ed93d2e3ec326a3b0564db2b6ee2b239843346e2dd44470b11b5aea86f3f519534270789e020261c87a0100bf3bba39ddbd3a1d8be0e38e68fd7e0c0
DIST cura-4.13.0.tar.gz 42339276 BLAKE2B 05e747b8e84ecf64bdc1ad7662eae7b5e8a739b7c1bbafdd3ae081e790dafbcd98209eb90f45996e93115ea8b7a38764be957091dd358c502e7aa71cb61fe6c7 SHA512 46f13cde12735d64dad2c533c7688612ebc1c2c8b78d71ced8cfd7d7abd80a53c09105bb16f64ae92cddf345fe44f83800d4448007fe5c2938c652f58354747b
+DIST cura-4.13.1.tar.gz 42339030 BLAKE2B e5c10ff03e42c0f88a2e7d827bf08f45c57142ca7b1dda6c00ccfbf0fd486dd366db23f00990ac5a021ecbfe038b2ca0247df8ea5130f2ee1efb766efc6f152c SHA512 6483fd6312bd2181cc812bce78aadc7e8532ecf292f09c75ce5e7870f7efddd63e84315ab40eb73c775b15c2ed2ce7fc804fcbefb73b3d8aaac77d8b22f0cbd0
DIST cura-4.9.1.tar.gz 47870392 BLAKE2B 2471c8461f73ad2343f4c3315994c5f63781ae1e49cb4699cd66e7e77c25a93916931fbaa6598c4144707dbc7778c902dad3a25839c0523aaf51ed39aacd2463 SHA512 436b8e33514de67d6d680fe59ab9599a75a86caa7e63fbcd05297b12a435483ec0c9ca90557fe23f25590a24e533294915fc18a665fd5cdb77fcc3a05a9076bf
diff --git a/media-gfx/cura/cura-4.13.1.ebuild b/media-gfx/cura/cura-4.13.1.ebuild
new file mode 100644
index 000000000000..060fa6170940
--- /dev/null
+++ b/media-gfx/cura/cura-4.13.1.ebuild
@@ -0,0 +1,89 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+PYTHON_COMPAT=( python3_{8..10} )
+
+inherit cmake desktop python-single-r1 xdg
+
+FDM_MATERIALS_PV=4.13.0
+LIBCHARON_PV=4.13.0
+LIBSAVITAR_PV=4.13.0
+PYNEST2D_PV=4.13_beta # never got tagged as 4.13.0 proper
+URANIUM_PV=4.13.0 # 4.13.1 is identical and so is not packaged in ::gentoo
+
+DESCRIPTION="A 3D model slicing application for 3D printing"
+HOMEPAGE="https://github.com/Ultimaker/Cura"
+SRC_URI="https://github.com/Ultimaker/${PN}/archive/${PV}.tar.gz -> ${P}.tar.gz"
+
+LICENSE="LGPL-3"
+SLOT="0"
+KEYWORDS="~amd64 ~arm64 ~x86"
+IUSE="debug test +usb zeroconf"
+REQUIRED_USE="${PYTHON_REQUIRED_USE}"
+
+RESTRICT="!test? ( test )"
+
+BDEPEND="${PYTHON_DEPS}
+ sys-devel/gettext
+ $(python_gen_cond_dep '
+ test? ( dev-python/pytest[${PYTHON_USEDEP}] )
+ ')
+"
+RDEPEND="${PYTHON_DEPS}
+ ~dev-libs/libarcus-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
+ ~dev-libs/libcharon-${LIBCHARON_PV}[${PYTHON_SINGLE_USEDEP}]
+ ~dev-libs/libsavitar-${LIBSAVITAR_PV}:=[python,${PYTHON_SINGLE_USEDEP}]
+ ~dev-python/pynest2d-${PYNEST2D_PV}[${PYTHON_SINGLE_USEDEP}]
+ ~dev-python/uranium-${URANIUM_PV}[${PYTHON_SINGLE_USEDEP}]
+ ~media-gfx/curaengine-${PV}
+ ~media-gfx/fdm-materials-${FDM_MATERIALS_PV}
+ dev-qt/qtquickcontrols[widgets]
+ $(python_gen_cond_dep '
+ dev-python/importlib_metadata[${PYTHON_USEDEP}]
+ dev-python/keyring[${PYTHON_USEDEP}]
+ dev-python/mypy[${PYTHON_USEDEP}]
+ dev-python/numpy[${PYTHON_USEDEP}]
+ dev-python/PyQt5[-debug,${PYTHON_USEDEP}]
+ dev-python/PyQt5-sip[${PYTHON_USEDEP}]
+ dev-python/requests[${PYTHON_USEDEP}]
+ dev-python/sentry-sdk[${PYTHON_USEDEP}]
+ dev-python/trimesh[${PYTHON_USEDEP}]
+ sci-libs/shapely[${PYTHON_USEDEP}]
+ usb? ( dev-python/pyserial[${PYTHON_USEDEP}] )
+ zeroconf? ( dev-python/zeroconf[${PYTHON_USEDEP}] )
+ ')"
+DEPEND="${RDEPEND}"
+
+PATCHES=(
+ "${FILESDIR}"/${PN}-4.12.1-code-style-test.patch
+)
+
+DOCS=( README.md )
+S="${WORKDIR}"/Cura-${PV}
+
+src_prepare() {
+ sed -i -e "s:lib\${LIB_SUFFIX}/python\${Python3_VERSION_MAJOR}.\${Python3_VERSION_MINOR}/site-packages:$(python_get_sitedir):g" CMakeLists.txt || die
+
+ # Remove failing test. Bug #693172.
+ rm -r plugins/VersionUpgrade/VersionUpgrade44to45/tests || die
+
+ cmake_src_prepare
+}
+
+src_configure() {
+ local mycmakeargs=(
+ -DCURA_BUILDTYPE="ebuild"
+ -DCURA_VERSION=${PV}
+ -DCURA_DEBUGMODE=$(usex debug)
+ )
+ cmake_src_configure
+}
+
+src_install() {
+ cmake_src_install
+ doicon icons/*.png
+ python_fix_shebang "${D}/usr/bin/cura"
+ python_optimize "${D}${get_libdir}"
+}
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2022-03-05 11:54 Matthew Smith
0 siblings, 0 replies; 41+ messages in thread
From: Matthew Smith @ 2022-03-05 11:54 UTC (permalink / raw
To: gentoo-commits
commit: ed35234d330132b7727cebe860a3a1ae395c49a0
Author: Matthew Smith <matthew <AT> gentoo <DOT> org>
AuthorDate: Sat Mar 5 11:35:44 2022 +0000
Commit: Matthew Smith <matthew <AT> gentoo <DOT> org>
CommitDate: Sat Mar 5 11:53:44 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ed35234d
media-gfx/cura: drop 4.13.0
cura 4.13.0 has two major issues related to support generation and
surfaces. 4.13.1 should be used instead.
Signed-off-by: Matthew Smith <matthew <AT> gentoo.org>
media-gfx/cura/Manifest | 1 -
media-gfx/cura/cura-4.13.0.ebuild | 86 ---------------------------------------
2 files changed, 87 deletions(-)
diff --git a/media-gfx/cura/Manifest b/media-gfx/cura/Manifest
index a2ac1372708b..957f70aed5ef 100644
--- a/media-gfx/cura/Manifest
+++ b/media-gfx/cura/Manifest
@@ -1,4 +1,3 @@
DIST cura-4.12.1.tar.gz 50021408 BLAKE2B 114bbe0cc022e33125486228db2eeaeacd9f4abeac8e65f3ed70231e05f4429062ce1cd49e1649959beb827b7a2d245f61c106529a18bd0cebbd0e8b9b8f883f SHA512 397048e1ed93d2e3ec326a3b0564db2b6ee2b239843346e2dd44470b11b5aea86f3f519534270789e020261c87a0100bf3bba39ddbd3a1d8be0e38e68fd7e0c0
-DIST cura-4.13.0.tar.gz 42339276 BLAKE2B 05e747b8e84ecf64bdc1ad7662eae7b5e8a739b7c1bbafdd3ae081e790dafbcd98209eb90f45996e93115ea8b7a38764be957091dd358c502e7aa71cb61fe6c7 SHA512 46f13cde12735d64dad2c533c7688612ebc1c2c8b78d71ced8cfd7d7abd80a53c09105bb16f64ae92cddf345fe44f83800d4448007fe5c2938c652f58354747b
DIST cura-4.13.1.tar.gz 42339030 BLAKE2B e5c10ff03e42c0f88a2e7d827bf08f45c57142ca7b1dda6c00ccfbf0fd486dd366db23f00990ac5a021ecbfe038b2ca0247df8ea5130f2ee1efb766efc6f152c SHA512 6483fd6312bd2181cc812bce78aadc7e8532ecf292f09c75ce5e7870f7efddd63e84315ab40eb73c775b15c2ed2ce7fc804fcbefb73b3d8aaac77d8b22f0cbd0
DIST cura-4.9.1.tar.gz 47870392 BLAKE2B 2471c8461f73ad2343f4c3315994c5f63781ae1e49cb4699cd66e7e77c25a93916931fbaa6598c4144707dbc7778c902dad3a25839c0523aaf51ed39aacd2463 SHA512 436b8e33514de67d6d680fe59ab9599a75a86caa7e63fbcd05297b12a435483ec0c9ca90557fe23f25590a24e533294915fc18a665fd5cdb77fcc3a05a9076bf
diff --git a/media-gfx/cura/cura-4.13.0.ebuild b/media-gfx/cura/cura-4.13.0.ebuild
deleted file mode 100644
index 805c67fdd48c..000000000000
--- a/media-gfx/cura/cura-4.13.0.ebuild
+++ /dev/null
@@ -1,86 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-PYTHON_COMPAT=( python3_{8..10} )
-
-inherit cmake desktop python-single-r1 xdg
-
-# Never got tagged as 4.13 proper.
-PYNEST2D_PV=4.13_beta
-
-DESCRIPTION="A 3D model slicing application for 3D printing"
-HOMEPAGE="https://github.com/Ultimaker/Cura"
-SRC_URI="https://github.com/Ultimaker/${PN}/archive/${PV}.tar.gz -> ${P}.tar.gz"
-
-LICENSE="LGPL-3"
-SLOT="0"
-KEYWORDS="~amd64 ~arm64 ~x86"
-IUSE="debug test +usb zeroconf"
-REQUIRED_USE="${PYTHON_REQUIRED_USE}"
-
-RESTRICT="!test? ( test )"
-
-BDEPEND="${PYTHON_DEPS}
- sys-devel/gettext
- $(python_gen_cond_dep '
- test? ( dev-python/pytest[${PYTHON_USEDEP}] )
- ')
-"
-RDEPEND="${PYTHON_DEPS}
- ~dev-libs/libarcus-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
- ~dev-libs/libcharon-${PV}[${PYTHON_SINGLE_USEDEP}]
- ~dev-libs/libsavitar-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
- ~dev-python/pynest2d-${PYNEST2D_PV}[${PYTHON_SINGLE_USEDEP}]
- ~dev-python/uranium-${PV}[${PYTHON_SINGLE_USEDEP}]
- ~media-gfx/curaengine-${PV}
- ~media-gfx/fdm-materials-${PV}
- dev-qt/qtquickcontrols[widgets]
- $(python_gen_cond_dep '
- dev-python/importlib_metadata[${PYTHON_USEDEP}]
- dev-python/keyring[${PYTHON_USEDEP}]
- dev-python/mypy[${PYTHON_USEDEP}]
- dev-python/numpy[${PYTHON_USEDEP}]
- dev-python/PyQt5[-debug,${PYTHON_USEDEP}]
- dev-python/PyQt5-sip[${PYTHON_USEDEP}]
- dev-python/requests[${PYTHON_USEDEP}]
- dev-python/sentry-sdk[${PYTHON_USEDEP}]
- dev-python/trimesh[${PYTHON_USEDEP}]
- sci-libs/shapely[${PYTHON_USEDEP}]
- usb? ( dev-python/pyserial[${PYTHON_USEDEP}] )
- zeroconf? ( dev-python/zeroconf[${PYTHON_USEDEP}] )
- ')"
-DEPEND="${RDEPEND}"
-
-PATCHES=(
- "${FILESDIR}"/${PN}-4.12.1-code-style-test.patch
-)
-
-DOCS=( README.md )
-S="${WORKDIR}"/Cura-${PV}
-
-src_prepare() {
- sed -i -e "s:lib\${LIB_SUFFIX}/python\${Python3_VERSION_MAJOR}.\${Python3_VERSION_MINOR}/site-packages:$(python_get_sitedir):g" CMakeLists.txt || die
-
- # Remove failing test. Bug #693172.
- rm -r plugins/VersionUpgrade/VersionUpgrade44to45/tests || die
-
- cmake_src_prepare
-}
-
-src_configure() {
- local mycmakeargs=(
- -DCURA_BUILDTYPE="ebuild"
- -DCURA_VERSION=${PV}
- -DCURA_DEBUGMODE=$(usex debug)
- )
- cmake_src_configure
-}
-
-src_install() {
- cmake_src_install
- doicon icons/*.png
- python_fix_shebang "${D}/usr/bin/cura"
- python_optimize "${D}${get_libdir}"
-}
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2022-03-10 21:21 Jakov Smolić
0 siblings, 0 replies; 41+ messages in thread
From: Jakov Smolić @ 2022-03-10 21:21 UTC (permalink / raw
To: gentoo-commits
commit: 31daff1952df1e8825db04bd52c222834c33a290
Author: Jakov Smolić <jsmolic <AT> gentoo <DOT> org>
AuthorDate: Thu Mar 10 21:20:55 2022 +0000
Commit: Jakov Smolić <jsmolic <AT> gentoo <DOT> org>
CommitDate: Thu Mar 10 21:20:55 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=31daff19
media-gfx/cura: Stabilize 4.12.1 amd64, #834389
Signed-off-by: Jakov Smolić <jsmolic <AT> gentoo.org>
media-gfx/cura/cura-4.12.1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/cura/cura-4.12.1.ebuild b/media-gfx/cura/cura-4.12.1.ebuild
index 448cf753c799..1017dfc52e54 100644
--- a/media-gfx/cura/cura-4.12.1.ebuild
+++ b/media-gfx/cura/cura-4.12.1.ebuild
@@ -17,7 +17,7 @@ SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${PV}.tar.gz -> ${P}.tar.
LICENSE="LGPL-3"
SLOT="0"
-KEYWORDS="~amd64 ~arm64 ~x86"
+KEYWORDS="amd64 ~arm64 ~x86"
IUSE="debug test +usb zeroconf"
REQUIRED_USE="${PYTHON_REQUIRED_USE}"
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2022-05-08 8:47 Michał Górny
0 siblings, 0 replies; 41+ messages in thread
From: Michał Górny @ 2022-05-08 8:47 UTC (permalink / raw
To: gentoo-commits
commit: 0a307309213632c3c319832bf6d05f7911174d17
Author: Michał Górny <mgorny <AT> gentoo <DOT> org>
AuthorDate: Sun May 8 08:34:12 2022 +0000
Commit: Michał Górny <mgorny <AT> gentoo <DOT> org>
CommitDate: Sun May 8 08:47:12 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=0a307309
media-gfx/cura: Remove py3.8 due to sentry-sdk losing it
Signed-off-by: Michał Górny <mgorny <AT> gentoo.org>
media-gfx/cura/cura-4.13.1-r1.ebuild | 89 ++++++++++++++++++++++++++++++++++++
1 file changed, 89 insertions(+)
diff --git a/media-gfx/cura/cura-4.13.1-r1.ebuild b/media-gfx/cura/cura-4.13.1-r1.ebuild
new file mode 100644
index 000000000000..a6a983dfe2ba
--- /dev/null
+++ b/media-gfx/cura/cura-4.13.1-r1.ebuild
@@ -0,0 +1,89 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+PYTHON_COMPAT=( python3_{9..10} )
+
+inherit cmake desktop python-single-r1 xdg
+
+FDM_MATERIALS_PV=4.13.0
+LIBCHARON_PV=4.13.0
+LIBSAVITAR_PV=4.13.0
+PYNEST2D_PV=4.13_beta # never got tagged as 4.13.0 proper
+URANIUM_PV=4.13.0 # 4.13.1 is identical and so is not packaged in ::gentoo
+
+DESCRIPTION="A 3D model slicing application for 3D printing"
+HOMEPAGE="https://github.com/Ultimaker/Cura"
+SRC_URI="https://github.com/Ultimaker/${PN}/archive/${PV}.tar.gz -> ${P}.tar.gz"
+
+LICENSE="LGPL-3"
+SLOT="0"
+KEYWORDS="~amd64 ~arm64 ~x86"
+IUSE="debug test +usb zeroconf"
+REQUIRED_USE="${PYTHON_REQUIRED_USE}"
+
+RESTRICT="!test? ( test )"
+
+BDEPEND="${PYTHON_DEPS}
+ sys-devel/gettext
+ $(python_gen_cond_dep '
+ test? ( dev-python/pytest[${PYTHON_USEDEP}] )
+ ')
+"
+RDEPEND="${PYTHON_DEPS}
+ ~dev-libs/libarcus-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
+ ~dev-libs/libcharon-${LIBCHARON_PV}[${PYTHON_SINGLE_USEDEP}]
+ ~dev-libs/libsavitar-${LIBSAVITAR_PV}:=[python,${PYTHON_SINGLE_USEDEP}]
+ ~dev-python/pynest2d-${PYNEST2D_PV}[${PYTHON_SINGLE_USEDEP}]
+ ~dev-python/uranium-${URANIUM_PV}[${PYTHON_SINGLE_USEDEP}]
+ ~media-gfx/curaengine-${PV}
+ ~media-gfx/fdm-materials-${FDM_MATERIALS_PV}
+ dev-qt/qtquickcontrols[widgets]
+ $(python_gen_cond_dep '
+ dev-python/importlib_metadata[${PYTHON_USEDEP}]
+ dev-python/keyring[${PYTHON_USEDEP}]
+ dev-python/mypy[${PYTHON_USEDEP}]
+ dev-python/numpy[${PYTHON_USEDEP}]
+ dev-python/PyQt5[-debug,${PYTHON_USEDEP}]
+ dev-python/PyQt5-sip[${PYTHON_USEDEP}]
+ dev-python/requests[${PYTHON_USEDEP}]
+ dev-python/sentry-sdk[${PYTHON_USEDEP}]
+ dev-python/trimesh[${PYTHON_USEDEP}]
+ sci-libs/shapely[${PYTHON_USEDEP}]
+ usb? ( dev-python/pyserial[${PYTHON_USEDEP}] )
+ zeroconf? ( dev-python/zeroconf[${PYTHON_USEDEP}] )
+ ')"
+DEPEND="${RDEPEND}"
+
+PATCHES=(
+ "${FILESDIR}"/${PN}-4.12.1-code-style-test.patch
+)
+
+DOCS=( README.md )
+S="${WORKDIR}"/Cura-${PV}
+
+src_prepare() {
+ sed -i -e "s:lib\${LIB_SUFFIX}/python\${Python3_VERSION_MAJOR}.\${Python3_VERSION_MINOR}/site-packages:$(python_get_sitedir):g" CMakeLists.txt || die
+
+ # Remove failing test. Bug #693172.
+ rm -r plugins/VersionUpgrade/VersionUpgrade44to45/tests || die
+
+ cmake_src_prepare
+}
+
+src_configure() {
+ local mycmakeargs=(
+ -DCURA_BUILDTYPE="ebuild"
+ -DCURA_VERSION=${PV}
+ -DCURA_DEBUGMODE=$(usex debug)
+ )
+ cmake_src_configure
+}
+
+src_install() {
+ cmake_src_install
+ doicon icons/*.png
+ python_fix_shebang "${D}/usr/bin/cura"
+ python_optimize "${D}${get_libdir}"
+}
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2022-05-08 19:59 Sam James
0 siblings, 0 replies; 41+ messages in thread
From: Sam James @ 2022-05-08 19:59 UTC (permalink / raw
To: gentoo-commits
commit: aa4a5ac4c9ed32d48015d9e8eddf1bd1001bee23
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun May 8 19:59:07 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun May 8 19:59:07 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=aa4a5ac4
media-gfx/cura: Stabilize 4.13.1-r1 amd64, #837179
Signed-off-by: Sam James <sam <AT> gentoo.org>
media-gfx/cura/cura-4.13.1-r1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/cura/cura-4.13.1-r1.ebuild b/media-gfx/cura/cura-4.13.1-r1.ebuild
index a6a983dfe2ba..b9234606b66a 100644
--- a/media-gfx/cura/cura-4.13.1-r1.ebuild
+++ b/media-gfx/cura/cura-4.13.1-r1.ebuild
@@ -19,7 +19,7 @@ SRC_URI="https://github.com/Ultimaker/${PN}/archive/${PV}.tar.gz -> ${P}.tar.gz"
LICENSE="LGPL-3"
SLOT="0"
-KEYWORDS="~amd64 ~arm64 ~x86"
+KEYWORDS="amd64 ~arm64 ~x86"
IUSE="debug test +usb zeroconf"
REQUIRED_USE="${PYTHON_REQUIRED_USE}"
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2022-05-09 7:00 Michał Górny
0 siblings, 0 replies; 41+ messages in thread
From: Michał Górny @ 2022-05-09 7:00 UTC (permalink / raw
To: gentoo-commits
commit: 29d3e495427ebd890457838b0fd94d1117b5cfc6
Author: Michał Górny <mgorny <AT> gentoo <DOT> org>
AuthorDate: Mon May 9 06:56:37 2022 +0000
Commit: Michał Górny <mgorny <AT> gentoo <DOT> org>
CommitDate: Mon May 9 07:00:47 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=29d3e495
media-gfx/cura: Remove old
Signed-off-by: Michał Górny <mgorny <AT> gentoo.org>
media-gfx/cura/Manifest | 2 -
media-gfx/cura/cura-4.12.1.ebuild | 87 --------------------------------------
media-gfx/cura/cura-4.13.1.ebuild | 89 ---------------------------------------
media-gfx/cura/cura-4.9.1.ebuild | 71 -------------------------------
4 files changed, 249 deletions(-)
diff --git a/media-gfx/cura/Manifest b/media-gfx/cura/Manifest
index 957f70aed5ef..18fa6ba7e33a 100644
--- a/media-gfx/cura/Manifest
+++ b/media-gfx/cura/Manifest
@@ -1,3 +1 @@
-DIST cura-4.12.1.tar.gz 50021408 BLAKE2B 114bbe0cc022e33125486228db2eeaeacd9f4abeac8e65f3ed70231e05f4429062ce1cd49e1649959beb827b7a2d245f61c106529a18bd0cebbd0e8b9b8f883f SHA512 397048e1ed93d2e3ec326a3b0564db2b6ee2b239843346e2dd44470b11b5aea86f3f519534270789e020261c87a0100bf3bba39ddbd3a1d8be0e38e68fd7e0c0
DIST cura-4.13.1.tar.gz 42339030 BLAKE2B e5c10ff03e42c0f88a2e7d827bf08f45c57142ca7b1dda6c00ccfbf0fd486dd366db23f00990ac5a021ecbfe038b2ca0247df8ea5130f2ee1efb766efc6f152c SHA512 6483fd6312bd2181cc812bce78aadc7e8532ecf292f09c75ce5e7870f7efddd63e84315ab40eb73c775b15c2ed2ce7fc804fcbefb73b3d8aaac77d8b22f0cbd0
-DIST cura-4.9.1.tar.gz 47870392 BLAKE2B 2471c8461f73ad2343f4c3315994c5f63781ae1e49cb4699cd66e7e77c25a93916931fbaa6598c4144707dbc7778c902dad3a25839c0523aaf51ed39aacd2463 SHA512 436b8e33514de67d6d680fe59ab9599a75a86caa7e63fbcd05297b12a435483ec0c9ca90557fe23f25590a24e533294915fc18a665fd5cdb77fcc3a05a9076bf
diff --git a/media-gfx/cura/cura-4.12.1.ebuild b/media-gfx/cura/cura-4.12.1.ebuild
deleted file mode 100644
index 1017dfc52e54..000000000000
--- a/media-gfx/cura/cura-4.12.1.ebuild
+++ /dev/null
@@ -1,87 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-PYTHON_COMPAT=( python3_{8..10} )
-
-inherit cmake desktop python-single-r1 xdg
-
-MY_PN=Cura
-# No fdm-materials-4.12.1 upstream, 4.12.0 is followed by 4.13.0
-FDM_PV="4.12.0"
-
-DESCRIPTION="A 3D model slicing application for 3D printing"
-HOMEPAGE="https://github.com/Ultimaker/Cura"
-SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${PV}.tar.gz -> ${P}.tar.gz"
-
-LICENSE="LGPL-3"
-SLOT="0"
-KEYWORDS="amd64 ~arm64 ~x86"
-IUSE="debug test +usb zeroconf"
-REQUIRED_USE="${PYTHON_REQUIRED_USE}"
-
-RESTRICT="!test? ( test )"
-
-BDEPEND="${PYTHON_DEPS}
- sys-devel/gettext
- $(python_gen_cond_dep '
- test? ( dev-python/pytest[${PYTHON_USEDEP}] )
- ')
-"
-RDEPEND="${PYTHON_DEPS}
- ~dev-libs/libarcus-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
- ~dev-libs/libcharon-${PV}[${PYTHON_SINGLE_USEDEP}]
- ~dev-libs/libsavitar-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
- ~dev-python/pynest2d-${PV}[${PYTHON_SINGLE_USEDEP}]
- ~dev-python/uranium-${PV}[${PYTHON_SINGLE_USEDEP}]
- ~media-gfx/curaengine-${PV}
- ~media-gfx/fdm-materials-${FDM_PV}
- dev-qt/qtquickcontrols[widgets]
- $(python_gen_cond_dep '
- dev-python/importlib_metadata[${PYTHON_USEDEP}]
- dev-python/keyring[${PYTHON_USEDEP}]
- dev-python/mypy[${PYTHON_USEDEP}]
- dev-python/numpy[${PYTHON_USEDEP}]
- dev-python/PyQt5[-debug,${PYTHON_USEDEP}]
- dev-python/PyQt5-sip[${PYTHON_USEDEP}]
- dev-python/requests[${PYTHON_USEDEP}]
- dev-python/sentry-sdk[${PYTHON_USEDEP}]
- dev-python/trimesh[${PYTHON_USEDEP}]
- sci-libs/shapely[${PYTHON_USEDEP}]
- usb? ( dev-python/pyserial[${PYTHON_USEDEP}] )
- zeroconf? ( dev-python/zeroconf[${PYTHON_USEDEP}] )
- ')"
-DEPEND="${RDEPEND}"
-
-PATCHES=(
- "${FILESDIR}"/${PN}-4.12.1-code-style-test.patch
-)
-
-DOCS=(README.md)
-S="${WORKDIR}/${MY_PN}-${PV}"
-
-src_prepare() {
- sed -i -e "s:lib\${LIB_SUFFIX}/python\${Python3_VERSION_MAJOR}.\${Python3_VERSION_MINOR}/site-packages:$(python_get_sitedir):g" CMakeLists.txt || die
-
- # Remove failing test. Bug #693172.
- rm -r plugins/VersionUpgrade/VersionUpgrade44to45/tests || die
-
- cmake_src_prepare
-}
-
-src_configure() {
- local mycmakeargs=(
- -DCURA_BUILDTYPE="ebuild"
- -DCURA_VERSION=${PV}
- -DCURA_DEBUGMODE=$(usex debug)
- )
- cmake_src_configure
-}
-
-src_install() {
- cmake_src_install
- doicon icons/*.png
- python_fix_shebang "${D}/usr/bin/cura"
- python_optimize "${D}${get_libdir}"
-}
diff --git a/media-gfx/cura/cura-4.13.1.ebuild b/media-gfx/cura/cura-4.13.1.ebuild
deleted file mode 100644
index 060fa6170940..000000000000
--- a/media-gfx/cura/cura-4.13.1.ebuild
+++ /dev/null
@@ -1,89 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-PYTHON_COMPAT=( python3_{8..10} )
-
-inherit cmake desktop python-single-r1 xdg
-
-FDM_MATERIALS_PV=4.13.0
-LIBCHARON_PV=4.13.0
-LIBSAVITAR_PV=4.13.0
-PYNEST2D_PV=4.13_beta # never got tagged as 4.13.0 proper
-URANIUM_PV=4.13.0 # 4.13.1 is identical and so is not packaged in ::gentoo
-
-DESCRIPTION="A 3D model slicing application for 3D printing"
-HOMEPAGE="https://github.com/Ultimaker/Cura"
-SRC_URI="https://github.com/Ultimaker/${PN}/archive/${PV}.tar.gz -> ${P}.tar.gz"
-
-LICENSE="LGPL-3"
-SLOT="0"
-KEYWORDS="~amd64 ~arm64 ~x86"
-IUSE="debug test +usb zeroconf"
-REQUIRED_USE="${PYTHON_REQUIRED_USE}"
-
-RESTRICT="!test? ( test )"
-
-BDEPEND="${PYTHON_DEPS}
- sys-devel/gettext
- $(python_gen_cond_dep '
- test? ( dev-python/pytest[${PYTHON_USEDEP}] )
- ')
-"
-RDEPEND="${PYTHON_DEPS}
- ~dev-libs/libarcus-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
- ~dev-libs/libcharon-${LIBCHARON_PV}[${PYTHON_SINGLE_USEDEP}]
- ~dev-libs/libsavitar-${LIBSAVITAR_PV}:=[python,${PYTHON_SINGLE_USEDEP}]
- ~dev-python/pynest2d-${PYNEST2D_PV}[${PYTHON_SINGLE_USEDEP}]
- ~dev-python/uranium-${URANIUM_PV}[${PYTHON_SINGLE_USEDEP}]
- ~media-gfx/curaengine-${PV}
- ~media-gfx/fdm-materials-${FDM_MATERIALS_PV}
- dev-qt/qtquickcontrols[widgets]
- $(python_gen_cond_dep '
- dev-python/importlib_metadata[${PYTHON_USEDEP}]
- dev-python/keyring[${PYTHON_USEDEP}]
- dev-python/mypy[${PYTHON_USEDEP}]
- dev-python/numpy[${PYTHON_USEDEP}]
- dev-python/PyQt5[-debug,${PYTHON_USEDEP}]
- dev-python/PyQt5-sip[${PYTHON_USEDEP}]
- dev-python/requests[${PYTHON_USEDEP}]
- dev-python/sentry-sdk[${PYTHON_USEDEP}]
- dev-python/trimesh[${PYTHON_USEDEP}]
- sci-libs/shapely[${PYTHON_USEDEP}]
- usb? ( dev-python/pyserial[${PYTHON_USEDEP}] )
- zeroconf? ( dev-python/zeroconf[${PYTHON_USEDEP}] )
- ')"
-DEPEND="${RDEPEND}"
-
-PATCHES=(
- "${FILESDIR}"/${PN}-4.12.1-code-style-test.patch
-)
-
-DOCS=( README.md )
-S="${WORKDIR}"/Cura-${PV}
-
-src_prepare() {
- sed -i -e "s:lib\${LIB_SUFFIX}/python\${Python3_VERSION_MAJOR}.\${Python3_VERSION_MINOR}/site-packages:$(python_get_sitedir):g" CMakeLists.txt || die
-
- # Remove failing test. Bug #693172.
- rm -r plugins/VersionUpgrade/VersionUpgrade44to45/tests || die
-
- cmake_src_prepare
-}
-
-src_configure() {
- local mycmakeargs=(
- -DCURA_BUILDTYPE="ebuild"
- -DCURA_VERSION=${PV}
- -DCURA_DEBUGMODE=$(usex debug)
- )
- cmake_src_configure
-}
-
-src_install() {
- cmake_src_install
- doicon icons/*.png
- python_fix_shebang "${D}/usr/bin/cura"
- python_optimize "${D}${get_libdir}"
-}
diff --git a/media-gfx/cura/cura-4.9.1.ebuild b/media-gfx/cura/cura-4.9.1.ebuild
deleted file mode 100644
index 219edd85cc71..000000000000
--- a/media-gfx/cura/cura-4.9.1.ebuild
+++ /dev/null
@@ -1,71 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-PYTHON_COMPAT=( python3_{8..9} )
-inherit cmake desktop python-single-r1 xdg
-
-MY_PN=Cura
-
-DESCRIPTION="A 3D model slicing application for 3D printing"
-HOMEPAGE="https://github.com/Ultimaker/Cura"
-SRC_URI="https://github.com/Ultimaker/${MY_PN}/archive/${PV}.tar.gz -> ${P}.tar.gz"
-
-LICENSE="LGPL-3"
-SLOT="0"
-KEYWORDS="~amd64 ~arm64 ~x86"
-IUSE="debug +usb zeroconf"
-REQUIRED_USE="${PYTHON_REQUIRED_USE}"
-
-BDEPEND="sys-devel/gettext"
-RDEPEND="${PYTHON_DEPS}
- ~dev-libs/libarcus-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
- ~dev-libs/libcharon-${PV}[${PYTHON_SINGLE_USEDEP}]
- ~dev-libs/libsavitar-${PV}:=[python,${PYTHON_SINGLE_USEDEP}]
- ~dev-python/pynest2d-${PV}[${PYTHON_SINGLE_USEDEP}]
- ~dev-python/uranium-${PV}[${PYTHON_SINGLE_USEDEP}]
- ~media-gfx/curaengine-${PV}
- ~media-gfx/fdm-materials-${PV}
- dev-qt/qtquickcontrols[widgets]
- $(python_gen_cond_dep '
- dev-python/importlib_metadata[${PYTHON_USEDEP}]
- dev-python/keyring[${PYTHON_USEDEP}]
- dev-python/mypy[${PYTHON_USEDEP}]
- dev-python/numpy[${PYTHON_USEDEP}]
- dev-python/PyQt5[-debug,${PYTHON_USEDEP}]
- dev-python/PyQt5-sip[${PYTHON_USEDEP}]
- dev-python/requests[${PYTHON_USEDEP}]
- dev-python/sentry-sdk[${PYTHON_USEDEP}]
- sci-libs/shapely[${PYTHON_USEDEP}]
- usb? ( dev-python/pyserial[${PYTHON_USEDEP}] )
- zeroconf? ( dev-python/zeroconf[${PYTHON_USEDEP}] )
- ')"
-DEPEND="${RDEPEND}"
-
-DOCS=(README.md)
-S="${WORKDIR}/${MY_PN}-${PV}"
-
-src_prepare() {
- sed -i -e "s:lib\${LIB_SUFFIX}/python\${Python3_VERSION_MAJOR}.\${Python3_VERSION_MINOR}/site-packages:$(python_get_sitedir):g" CMakeLists.txt || die
-
- cmake_src_prepare
-}
-
-src_configure() {
- # trimesh not available in portage
- local mycmakeargs=(
- -DCURA_BUILDTYPE="ebuild"
- -DCURA_VERSION=${PV}
- -DCURA_NO_INSTALL_PLUGINS="AMFReader;Toolbox;TrimeshReader"
- -DCURA_DEBUGMODE=$(usex debug)
- )
- cmake_src_configure
-}
-
-src_install() {
- cmake_src_install
- doicon icons/*.png
- python_fix_shebang "${D}/usr/bin/cura"
- python_optimize "${D}${get_libdir}"
-}
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/
@ 2022-07-09 10:52 Matthew Smith
0 siblings, 0 replies; 41+ messages in thread
From: Matthew Smith @ 2022-07-09 10:52 UTC (permalink / raw
To: gentoo-commits
commit: ea30a82b341fb1343e03c50bfe93713e1827647f
Author: Matthew Smith <matthew <AT> gentoo <DOT> org>
AuthorDate: Sat Jul 9 10:50:51 2022 +0000
Commit: Matthew Smith <matthew <AT> gentoo <DOT> org>
CommitDate: Sat Jul 9 10:52:12 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ea30a82b
media-gfx/cura: update maintainers
Remove inactive proxy-maintainer and 3dprint project member.
Signed-off-by: Matthew Smith <matthew <AT> gentoo.org>
media-gfx/cura/metadata.xml | 8 --------
1 file changed, 8 deletions(-)
diff --git a/media-gfx/cura/metadata.xml b/media-gfx/cura/metadata.xml
index 6bf1b5a4e99c..8857a09726ef 100644
--- a/media-gfx/cura/metadata.xml
+++ b/media-gfx/cura/metadata.xml
@@ -5,18 +5,10 @@
<email>3dprint@gentoo.org</email>
<name>Gentoo 3D Printer Project</name>
</maintainer>
- <maintainer type="person">
- <email>alexxy@gentoo.org</email>
- <name>Alexey Shvetsov</name>
- </maintainer>
<maintainer type="person" proxied="yes">
<email>mathy@vanvoorden.be</email>
<name>Mathy Vanvoorden</name>
</maintainer>
- <maintainer type="person" proxied="yes">
- <email>perlovka@gmail.com</email>
- <name>Michael Perlov</name>
- </maintainer>
<maintainer type="project" proxied="proxy">
<email>proxy-maint@gentoo.org</email>
<name>Proxy Maintainers</name>
^ permalink raw reply related [flat|nested] 41+ messages in thread
end of thread, other threads:[~2022-07-09 10:52 UTC | newest]
Thread overview: 41+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-11-30 18:37 [gentoo-commits] repo/gentoo:master commit in: media-gfx/cura/ Dennis Lamm
-- strict thread matches above, loose matches on Subject: below --
2022-07-09 10:52 Matthew Smith
2022-05-09 7:00 Michał Górny
2022-05-08 19:59 Sam James
2022-05-08 8:47 Michał Górny
2022-03-10 21:21 Jakov Smolić
2022-03-05 11:54 Matthew Smith
2022-03-05 11:54 Matthew Smith
2022-02-28 19:43 Matthew Smith
2022-02-28 19:43 Matthew Smith
2022-02-13 22:38 Jakov Smolić
2022-02-11 20:25 Arthur Zamarin
2021-11-10 19:44 Jonas Stein
2021-06-10 17:41 Dennis Lamm
2021-02-07 23:57 Dennis Lamm
2021-02-07 23:57 Dennis Lamm
2020-12-14 0:46 Sam James
2020-11-30 18:37 Dennis Lamm
2020-11-30 18:37 Dennis Lamm
2020-10-11 11:25 Dennis Lamm
2020-10-07 0:59 Sam James
2020-10-07 0:59 Sam James
2020-10-07 0:59 Sam James
2020-10-07 0:59 Sam James
2020-09-19 16:34 Sam James
2020-05-25 21:04 Alexey Shvetsov
2020-02-09 16:29 Michał Górny
2019-10-16 5:22 Joonas Niilola
2019-01-02 22:05 Amy Liffey
2019-01-02 21:52 Amy Liffey
2018-07-16 17:29 Amy Liffey
2018-06-14 20:14 Alexey Shvetsov
2018-04-15 14:06 Amy Liffey
2018-04-03 15:28 Jonas Stein
2017-11-26 23:02 David Seifert
2017-07-23 11:05 Alexey Shvetsov
2017-04-23 20:48 Michał Górny
2016-08-08 1:49 Göktürk Yüksek
2016-08-08 1:49 Göktürk Yüksek
2016-05-22 17:05 Göktürk Yüksek
2016-04-29 11:35 Alexey Shvetsov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox