[gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/

["Alexey Shvetsov" <alexxy@gentoo.org>]

commit:     742fa1d6fa947439c72884ebe6193627f0f7539c
Author:     Alessandro Barbieri <lssndrbarbieri <AT> gmail <DOT> com>
AuthorDate: Thu May 14 18:45:27 2020 +0000
Commit:     Alexey Shvetsov <alexxy <AT> gentoo <DOT> org>
CommitDate: Mon May 25 19:46:27 2020 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=742fa1d6

sys-cluster/slurm: improve netloc dep, disable-static

netloc will be provided by hwloc[netloc] from now on
changes reflect that

Package-Manager: Portage-2.3.99, Repoman-2.3.22
Signed-off-by: Alessandro Barbieri <lssndrbarbieri <AT> gmail.com>
Closes: https://github.com/gentoo/gentoo/pull/15795
Signed-off-by: Alexey Shvetsov <alexxy <AT> gentoo.org>

 sys-cluster/slurm/slurm-20.02.2.1-r1.ebuild | 267 ++++++++++++++++++++++++++++
 1 file changed, 267 insertions(+)

diff --git a/sys-cluster/slurm/slurm-20.02.2.1-r1.ebuild b/sys-cluster/slurm/slurm-20.02.2.1-r1.ebuild
new file mode 100644
index 00000000000..1a37f7c41a8
--- /dev/null
+++ b/sys-cluster/slurm/slurm-20.02.2.1-r1.ebuild
@@ -0,0 +1,267 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="7"
+
+if [[ "${PV}" == *9999* ]]; then
+	EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
+	INHERIT_GIT="git-r3"
+	MY_P="${P}"
+else
+	if [[ "${PV}" == *pre* || "${PV}" == *rc* ]]; then
+		MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
+	else
+		MY_PV=$(ver_rs 1-3 '-') # stable releases
+	fi
+	MY_P="${PN}-${MY_PV}"
+	INHERIT_GIT=""
+	SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
+	KEYWORDS="~amd64 ~x86"
+fi
+
+inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
+
+DESCRIPTION="A Highly Scalable Resource Manager"
+HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
+
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd ucx torque X"
+
+COMMON_DEPEND="
+	app-arch/lz4:0=
+	!net-analyzer/slurm
+	!net-analyzer/sinfo
+	>=sys-apps/hwloc-1.1.1-r1
+	!sys-cluster/torque
+	sys-libs/ncurses:0=
+	sys-libs/readline:0=
+
+	|| ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
+
+	amd64? ( netloc? ( || ( >=sys-apps/hwloc-2.1.0[netloc] sys-apps/netloc ) ) )
+	hdf5? ( sci-libs/hdf5:= )
+	ipmi? ( sys-libs/freeipmi )
+	json? ( dev-libs/json-c:= )
+	lua? ( dev-lang/lua:0= )
+	!lua? ( !dev-lang/lua )
+	mysql? (
+		|| ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
+		slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
+		)
+	munge? ( sys-auth/munge )
+	numa? ( sys-process/numactl )
+	ofed? ( sys-fabric/ofed )
+	pam? ( sys-libs/pam )
+	ucx? ( sys-cluster/ucx )
+	X? ( net-libs/libssh2 )
+"
+DEPEND="${COMMON_DEPEND}
+	html? ( sys-apps/man2html )
+"
+RDEPEND="${COMMON_DEPEND}
+	acct-user/slurm
+	acct-group/slurm
+	dev-libs/libcgroup
+"
+REQUIRED_USE="torque? ( perl )"
+
+S="${WORKDIR}/${PN}-${MY_P}"
+
+LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
+LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
+
+RESTRICT="test"
+
+src_unpack() {
+	if [[ "${PV}" == *9999* ]]; then
+		git-r3_src_unpack
+	else
+		default
+	fi
+}
+
+src_prepare() {
+	tc-ld-disable-gold
+	default
+
+	# pids should go to /var/run/slurm
+	sed \
+		-e 's:/tmp:/var/tmp:g' \
+		-e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
+		-e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
+		-e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
+		-e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
+		-i "${S}/etc/slurm.conf.example" \
+		|| die "Can't sed for /var/run/slurmctld.pid"
+	sed \
+		-e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
+		-i "${S}/etc/slurmdbd.conf.example" \
+		|| die "Can't sed for /var/run/slurmdbd.pid"
+	# gentooify systemd services
+	sed \
+		-e 's:sysconfig/.*:conf.d/slurm:g' \
+		-e 's:var/run/:run/slurm/:g' \
+		-e '/^EnvironmentFile=.*/d' \
+		-i "${S}/etc"/*.service.in \
+		|| die "Can't sed systemd services for sysconfig or var/run/"
+
+	sed -e '/AM_PATH_GTK_2_0/d' -i configure.ac || die
+
+	hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
+	eautoreconf
+}
+
+src_configure() {
+	local myconf=(
+		$(use_enable debug)
+		$(use_enable multiple-slurmd)
+		$(use_enable pam)
+		$(use_enable X x11)
+		$(use_with hdf5)
+		$(use_with json)
+		$(use_with munge)
+		$(use_with ofed)
+		$(use_with ucx)
+		--disable-static
+		--htmldir="${EPREFIX}/usr/share/doc/${PF}"
+		--sysconfdir="${EPREFIX}/etc/${PN}"
+		--with-hwloc="${EPREFIX}/usr"
+	)
+	use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
+	use mysql || myconf+=( --without-mysql_config )
+	use amd64 && myconf+=( $(use_with netloc) )
+	econf "${myconf[@]}"
+
+	# --htmldir does not seems to propagate... Documentations are installed
+	# in /usr/share/doc/slurm-2.3.0/html
+	# instead of /usr/share/doc/slurm-2.3.0.2/html
+	sed \
+		-e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
+		-i doc/html/Makefile || die
+	if use perl ; then
+		# small hack to make it compile
+		mkdir -p "${S}/src/api/.libs" || die
+		mkdir -p "${S}/src/db_api/.libs" || die
+		touch "${S}/src/api/.libs/libslurm.so" || die
+		touch "${S}/src/db_api/.libs/libslurmdb.so" || die
+		cd "${LIBSLURM_PERL_S}" || die
+		S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
+		cd "${LIBSLURMDB_PERL_S}" || die
+		S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
+		cd "${S}" || die
+		rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
+	fi
+}
+
+src_compile() {
+	default
+	use pam && emake -C contribs/pam
+	if use perl ; then
+		cd "${LIBSLURM_PERL_S}" || die
+		S="${LIBSLURM_PERL_S}" perl-module_src_compile
+		cd "${LIBSLURMDB_PERL_S}" || die
+		S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
+		cd "${S}" || die
+	fi
+	use torque && emake -C contribs/torque
+}
+
+src_install() {
+	default
+	use pam && emake DESTDIR="${D}" -C contribs/pam install
+	if use perl; then
+		cd "${LIBSLURM_PERL_S}" || die
+		S="${LIBSLURM_PERL_S}" perl-module_src_install
+		cd "${LIBSLURMDB_PERL_S}" || die
+		S="${LIBSLURMDB_PERL_S}" perl-module_src_install
+		cd "${S}" || die
+	fi
+	if use torque; then
+		emake DESTDIR="${D}" -C contribs/torque
+		rm -f "${D}"/usr/bin/mpiexec || die
+	fi
+	find "${ED}" -name '*.la' -exec rm {} +
+	# install sample configs
+	keepdir /etc/slurm
+	insinto /etc/slurm
+	doins \
+		etc/prolog.example \
+		etc/cgroup.conf.example \
+		etc/slurm.conf.example \
+		etc/slurmdbd.conf.example
+	exeinto /etc/slurm
+	keepdir /etc/slurm/layouts.d
+	insinto /etc/slurm/layouts.d
+	newins etc/layouts.d.power.conf.example power.conf.example
+	newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
+	newins etc/layouts.d.unit.conf.example unit.conf.example
+	# install init.d files
+	newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
+	newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
+	newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
+	# install conf.d files
+	newconfd "${FILESDIR}/slurm.confd" slurm
+	# install logrotate file
+	insinto /etc/logrotate.d
+	newins "${FILESDIR}/logrotate" slurm
+	# install bashcomp
+	newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
+	bashcomp_alias scontrol \
+		sreport sacctmgr squeue scancel sshare sbcast sinfo \
+		sprio sacct salloc sbatch srun sattach sdiag sstat
+	# install systemd files
+	systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
+	systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
+}
+
+pkg_preinst() {
+	if use munge; then
+		sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
+	fi
+}
+
+create_folders_and_fix_permissions() {
+	einfo "Fixing permissions in ${@}"
+	mkdir -p ${@} || die
+	chown -R ${PN}:${PN} ${@} || die
+}
+
+pkg_postinst() {
+	paths=(
+		"${EROOT}/var/${PN}/checkpoint"
+		"${EROOT}/var/${PN}"
+		"${EROOT}/var/spool/${PN}/slurmd"
+		"${EROOT}/var/spool/${PN}"
+		"${EROOT}/var/log/${PN}"
+		"/var/tmp/${PN}/${PN}d"
+		"/var/tmp/${PN}"
+		"/run/${PN}"
+	)
+	local folder_path
+	for folder_path in ${paths[@]}; do
+		create_folders_and_fix_permissions $folder_path
+	done
+	echo
+
+	elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
+	elog "through a (javascript enabled) browser to create a configureation file."
+	elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
+	echo
+	elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
+	elog "Your kernel must be compiled with the wanted cgroup feature:"
+	elog "    For the proctrack plugin:"
+	elog "        freezer"
+	elog "    For the task plugin:"
+	elog "        cpuset, memory, devices"
+	elog "    For the accounting plugin:"
+	elog "        cpuacct, memory, blkio"
+	elog "Then, set these options in /etc/slurm/slurm.conf:"
+	elog "    ProctrackType=proctrack/cgroup"
+	elog "    TaskPlugin=task/cgroup"
+	einfo
+	ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
+	for folder_path in ${paths[@]}; do
+		ewarn "    ${folder_path}"
+	done
+}