From: "Robin H. Johnson" <robbat2@gentoo.org>
To: gentoo-commits@lists.gentoo.org
Subject: [gentoo-commits] proj/gentoo-mirrorstats:master commit in: /
Date: Wed, 29 Apr 2020 05:33:57 +0000 (UTC) [thread overview]
Message-ID: <1588138428.adddc138088d7f2157cfcdd72402b9395be4ccb0.robbat2@gentoo> (raw)
commit: adddc138088d7f2157cfcdd72402b9395be4ccb0
Author: Robin H. Johnson <robbat2 <AT> gentoo <DOT> org>
AuthorDate: Wed Apr 29 05:33:48 2020 +0000
Commit: Robin H. Johnson <robbat2 <AT> gentoo <DOT> org>
CommitDate: Wed Apr 29 05:33:48 2020 +0000
URL: https://gitweb.gentoo.org/proj/gentoo-mirrorstats.git/commit/?id=adddc138
wrapper: input validations
Signed-off-by: Robin H. Johnson <robbat2 <AT> gentoo.org>
mirmon-wrapper.sh | 74 +++++++++++++++++++++++++++++++++++++------------------
1 file changed, 50 insertions(+), 24 deletions(-)
diff --git a/mirmon-wrapper.sh b/mirmon-wrapper.sh
index ba731c6..2c50369 100755
--- a/mirmon-wrapper.sh
+++ b/mirmon-wrapper.sh
@@ -24,9 +24,6 @@ die() {
}
main() {
- [[ -z "$MODE" ]] && die "--mode unset"
- [[ -z "$XML_SRC" ]] && die "--xml-src unset"
- [[ -z "$URL" ]] && die "--url unset"
SITEDIR=/var/www/mirrorstats.gentoo.org
REPODIR=${SITEDIR}/gentoo-mirrorstats/
MODEDIR=${REPODIR}/${MODE}_mirrors/
@@ -35,35 +32,40 @@ main() {
MIRMON=$(readlink -f "${SITEDIR}"/mirmon/mirmon)
CONFFILE=$(readlink -f "${MODEDIR}"/mirmon.conf)
VAR_GMIRRORS=${VARDIR}/g.mirrors
-
- # Grab mirrors from the web
- mkdir -p "${VARDIR}"
- "${REPODIR}"/get-mirrors-from-${XML_SRC}-xml.rb > "${VAR_GMIRRORS}".tmp
-
EXTRA_MIRRORS=${MODEDIR}/g.mirrors.extra
+
+ # Grab mirrors from the web
+ mkdir -p "${VARDIR}" "${HTDOCS}" || die "Failed to mkdir"
+ "${REPODIR}/get-mirrors-from-${XML_SRC}-xml.rb" > "${VAR_GMIRRORS}".tmp || die "Unable to fetch mirror list"
+
[[ -e "${EXTRA_MIRRORS}" ]] && cat "${EXTRA_MIRRORS}" >>"${VAR_GMIRRORS}".tmp
-
+
# Atomic rotate into place
- mv -f "${VAR_GMIRRORS}"{.tmp,}
-
+ mv -f "${VAR_GMIRRORS}"{.tmp,} || die "Failed to set mirror list"
+
# fatal if the state file is NOT present.
- [[ -e ${VARDIR}/mirmon.state ]] || touch "${VARDIR}/mirmon.state"
-
+ if [[ ! -e ${VARDIR}/mirmon.state ]]; then
+ touch "${VARDIR}/mirmon.state" || die "Could not create state file"
+ else
+ test -w "${VARDIR}/mirmon.state" || die "Cannot write state file!"
+ fi
+
# run mirmon
- /usr/bin/perl "${MIRMON}" -c "${CONFFILE}" -q -get update
-
+ /usr/bin/perl "${MIRMON}" -c "${CONFFILE}" -q -get update || die "mirmon failed: $?"
+
# Set up a nice link to our mirror page directly:
- mkdir -p ${HTDOCS}
sed \
- -e "s#mirrors</H2>#<a href="${URL}">mirrors</a></H2>#" \
+ -e "s#mirrors</H2>#<a href=\"${URL}\">mirrors</a></H2>#" \
>"${HTDOCS}"/index.html.tmp <"${HTDOCS}"/index-wip.html \
- && mv -f "${HTDOCS}"/index.html{.tmp,}
-
+ || die "Failed to fix URLs(sed)"
+ mv -f "${HTDOCS}"/index.html{.tmp,} || die "Failed to fix URLs(mv)"
+
# Generate a json file containing the state of each mirror
"${REPODIR}"/generate-json.py \
"${VARDIR}"/mirmon.state \
>"${HTDOCS}"/state.json.tmp \
- && mv -f "${HTDOCS}"/state.json{.tmp,}
+ || die "Failed to generate JSON (py)"
+ mv -f "${HTDOCS}"/state.json{.tmp,} || die "Failed to generate JSON (mv)"
# Done
exit 0
@@ -115,11 +117,35 @@ while [[ $# -gt 0 ]]; do
esac
done
+# Validations
+MODE_INPUTS=(
+ distfiles
+ rsync
+ snapshots
+ experimental
+ releases
+)
+MODE_VALID=0
+for m in "${MODE_INPUTS[@]}"; do
+ [[ "$m" == "$MODE" ]] && MODE_VALID=1
+done
+[[ $MODE_VALID -eq 1 ]] || MODE=''
+
+XML_SRC_INPUTS=(
+ distfiles
+ rsync
+)
+XML_SRC_VALID=0
+for m in "${XML_SRC_INPUTS[@]}"; do
+ [[ "$m" == "$XML_SRC" ]] && XML_SRC_VALID=1
+done
+[[ $XML_SRC_VALID -eq 1 ]] || XML_SRC=''
+
+[[ -z "$MODE" ]] && die "--mode must be one of: ${MODE_INPUTS[*]}"
+[[ -z "$XML_SRC" ]] && die "--xml-src must be one of: ${XML_SRC_INPUTS[*]}"
+[[ -z "$URL" ]] && die "--url unset"
+
[[ $INVALID -eq 1 ]] && usage
[[ $HELP -eq 1 ]] && dohelp
main
-
-#MODE=snapshots
-#XML_SRC=distfiles
-#URL=https://www.gentoo.org/downloads/mirrors/
next reply other threads:[~2020-04-29 5:34 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-29 5:33 Robin H. Johnson [this message]
-- strict thread matches above, loose matches on Subject: below --
2023-03-22 17:44 [gentoo-commits] proj/gentoo-mirrorstats:master commit in: / Robin H. Johnson
2023-03-22 16:29 Robin H. Johnson
2023-03-22 16:29 Robin H. Johnson
2020-05-01 17:59 Robin H. Johnson
2020-04-30 22:59 Robin H. Johnson
2020-04-30 22:56 Robin H. Johnson
2020-04-30 22:56 Robin H. Johnson
2020-04-30 22:52 Robin H. Johnson
2020-04-30 22:17 Robin H. Johnson
2020-04-30 21:27 Robin H. Johnson
2020-04-30 21:27 Robin H. Johnson
2020-04-30 21:11 Robin H. Johnson
2020-04-30 20:29 Robin H. Johnson
2020-04-30 6:31 Robin H. Johnson
2020-04-30 6:02 Robin H. Johnson
2020-04-29 6:45 Robin H. Johnson
2020-04-29 6:39 Robin H. Johnson
2020-04-29 5:48 Robin H. Johnson
2020-04-29 5:41 Robin H. Johnson
2020-04-29 5:20 Robin H. Johnson
2020-04-29 5:20 Robin H. Johnson
2020-04-29 5:20 Robin H. Johnson
2020-04-28 23:21 Robin H. Johnson
2020-04-28 23:21 Robin H. Johnson
2020-04-28 17:42 Robin H. Johnson
2020-04-28 17:34 Robin H. Johnson
2020-04-28 16:46 Robin H. Johnson
2020-04-28 7:54 Robin H. Johnson
2018-12-15 18:57 Alec Warner
2016-11-05 18:02 Robin H. Johnson
2014-02-12 3:44 Jeremy Olexa
2013-08-28 2:28 Alec Warner
2013-08-27 9:08 Alec Warner
2012-12-25 17:22 Jeremy Olexa
2012-12-22 10:46 Jeremy Olexa
2012-09-18 16:17 Jeremy Olexa
2012-06-20 21:05 Jeremy Olexa
2012-02-24 18:45 Jeremy Olexa
2011-06-02 13:48 Jeremy Olexa
2011-05-19 15:09 Jeremy Olexa
2011-05-19 15:09 Jeremy Olexa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1588138428.adddc138088d7f2157cfcdd72402b9395be4ccb0.robbat2@gentoo \
--to=robbat2@gentoo.org \
--cc=gentoo-commits@lists.gentoo.org \
--cc=gentoo-dev@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox