[gentoo-commits] proj/linux-patches:5.6 commit in: /

["Mike Pagano" <mpagano@gentoo.org>]

commit:     576d2c6121c73c74c140804fb35f5aff0cf01dd0
Author:     Mike Pagano <mpagano <AT> gentoo <DOT> org>
AuthorDate: Wed Apr  1 12:06:13 2020 +0000
Commit:     Mike Pagano <mpagano <AT> gentoo <DOT> org>
CommitDate: Wed Apr  1 12:06:13 2020 +0000
URL:        https://gitweb.gentoo.org/proj/linux-patches.git/commit/?id=576d2c61

Linux patch 5.6.1

Signed-off-by: Mike Pagano <mpagano <AT> gentoo.org>

 0000_README            |   4 +
 1001_linux-5.6.1.patch | 787 +++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 791 insertions(+)

diff --git a/0000_README b/0000_README
index 5080b3d..e9a8c70 100644
--- a/0000_README
+++ b/0000_README
@@ -43,6 +43,10 @@ EXPERIMENTAL
 Individual Patch Descriptions:
 --------------------------------------------------------------------------
 
+Patch:  1000_linux-5.6.1.patch
+From:   http://www.kernel.org
+Desc:   Linux 5.6.1
+
 Patch:  1500_XATTR_USER_PREFIX.patch
 From:   https://bugs.gentoo.org/show_bug.cgi?id=470644
 Desc:   Support for namespace user.pax.* on tmpfs.

diff --git a/1001_linux-5.6.1.patch b/1001_linux-5.6.1.patch
new file mode 100644
index 0000000..cbde007
--- /dev/null
+++ b/1001_linux-5.6.1.patch
@@ -0,0 +1,787 @@
+diff --git a/Makefile b/Makefile
+index 4d0711f54047..75d17e7f799b 100644
+--- a/Makefile
++++ b/Makefile
+@@ -1,7 +1,7 @@
+ # SPDX-License-Identifier: GPL-2.0
+ VERSION = 5
+ PATCHLEVEL = 6
+-SUBLEVEL = 0
++SUBLEVEL = 1
+ EXTRAVERSION =
+ NAME = Kleptomaniac Octopus
+ 
+diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
+index 11ea1aff40db..8c6f8c83dd6f 100644
+--- a/drivers/ata/ahci.c
++++ b/drivers/ata/ahci.c
+@@ -401,6 +401,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
+ 	{ PCI_VDEVICE(INTEL, 0xa252), board_ahci }, /* Lewisburg RAID*/
+ 	{ PCI_VDEVICE(INTEL, 0xa256), board_ahci }, /* Lewisburg RAID*/
+ 	{ PCI_VDEVICE(INTEL, 0xa356), board_ahci }, /* Cannon Lake PCH-H RAID */
++	{ PCI_VDEVICE(INTEL, 0x06d7), board_ahci }, /* Comet Lake-H RAID */
+ 	{ PCI_VDEVICE(INTEL, 0x0f22), board_ahci_mobile }, /* Bay Trail AHCI */
+ 	{ PCI_VDEVICE(INTEL, 0x0f23), board_ahci_mobile }, /* Bay Trail AHCI */
+ 	{ PCI_VDEVICE(INTEL, 0x22a3), board_ahci_mobile }, /* Cherry Tr. AHCI */
+diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c
+index 039963a7765b..198ddfb8d2b1 100644
+--- a/drivers/media/usb/b2c2/flexcop-usb.c
++++ b/drivers/media/usb/b2c2/flexcop-usb.c
+@@ -511,6 +511,9 @@ static int flexcop_usb_init(struct flexcop_usb *fc_usb)
+ 		return ret;
+ 	}
+ 
++	if (fc_usb->uintf->cur_altsetting->desc.bNumEndpoints < 1)
++		return -ENODEV;
++
+ 	switch (fc_usb->udev->speed) {
+ 	case USB_SPEED_LOW:
+ 		err("cannot handle USB speed because it is too slow.");
+@@ -544,9 +547,6 @@ static int flexcop_usb_probe(struct usb_interface *intf,
+ 	struct flexcop_device *fc = NULL;
+ 	int ret;
+ 
+-	if (intf->cur_altsetting->desc.bNumEndpoints < 1)
+-		return -ENODEV;
+-
+ 	if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) {
+ 		err("out of memory\n");
+ 		return -ENOMEM;
+diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c
+index e53c58ab6488..ef62dd6c5ae4 100644
+--- a/drivers/media/usb/dvb-usb/dib0700_core.c
++++ b/drivers/media/usb/dvb-usb/dib0700_core.c
+@@ -818,7 +818,7 @@ int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf)
+ 
+ 	/* Starting in firmware 1.20, the RC info is provided on a bulk pipe */
+ 
+-	if (intf->altsetting[0].desc.bNumEndpoints < rc_ep + 1)
++	if (intf->cur_altsetting->desc.bNumEndpoints < rc_ep + 1)
+ 		return -ENODEV;
+ 
+ 	purb = usb_alloc_urb(0, GFP_KERNEL);
+@@ -838,7 +838,7 @@ int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf)
+ 	 * Some devices like the Hauppauge NovaTD model 52009 use an interrupt
+ 	 * endpoint, while others use a bulk one.
+ 	 */
+-	e = &intf->altsetting[0].endpoint[rc_ep].desc;
++	e = &intf->cur_altsetting->endpoint[rc_ep].desc;
+ 	if (usb_endpoint_dir_in(e)) {
+ 		if (usb_endpoint_xfer_bulk(e)) {
+ 			pipe = usb_rcvbulkpipe(d->udev, rc_ep);
+diff --git a/drivers/media/usb/gspca/ov519.c b/drivers/media/usb/gspca/ov519.c
+index f417dfc0b872..0afe70a3f9a2 100644
+--- a/drivers/media/usb/gspca/ov519.c
++++ b/drivers/media/usb/gspca/ov519.c
+@@ -3477,6 +3477,11 @@ static void ov511_mode_init_regs(struct sd *sd)
+ 		return;
+ 	}
+ 
++	if (alt->desc.bNumEndpoints < 1) {
++		sd->gspca_dev.usb_err = -ENODEV;
++		return;
++	}
++
+ 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+ 	reg_w(sd, R51x_FIFO_PSIZE, packet_size >> 5);
+ 
+@@ -3603,6 +3608,11 @@ static void ov518_mode_init_regs(struct sd *sd)
+ 		return;
+ 	}
+ 
++	if (alt->desc.bNumEndpoints < 1) {
++		sd->gspca_dev.usb_err = -ENODEV;
++		return;
++	}
++
+ 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+ 	ov518_reg_w32(sd, R51x_FIFO_PSIZE, packet_size & ~7, 2);
+ 
+diff --git a/drivers/media/usb/gspca/stv06xx/stv06xx.c b/drivers/media/usb/gspca/stv06xx/stv06xx.c
+index 79653d409951..95673fc0a99c 100644
+--- a/drivers/media/usb/gspca/stv06xx/stv06xx.c
++++ b/drivers/media/usb/gspca/stv06xx/stv06xx.c
+@@ -282,6 +282,9 @@ static int stv06xx_start(struct gspca_dev *gspca_dev)
+ 		return -EIO;
+ 	}
+ 
++	if (alt->desc.bNumEndpoints < 1)
++		return -ENODEV;
++
+ 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+ 	err = stv06xx_write_bridge(sd, STV_ISO_SIZE_L, packet_size);
+ 	if (err < 0)
+@@ -306,11 +309,21 @@ out:
+ 
+ static int stv06xx_isoc_init(struct gspca_dev *gspca_dev)
+ {
++	struct usb_interface_cache *intfc;
+ 	struct usb_host_interface *alt;
+ 	struct sd *sd = (struct sd *) gspca_dev;
+ 
++	intfc = gspca_dev->dev->actconfig->intf_cache[0];
++
++	if (intfc->num_altsetting < 2)
++		return -ENODEV;
++
++	alt = &intfc->altsetting[1];
++
++	if (alt->desc.bNumEndpoints < 1)
++		return -ENODEV;
++
+ 	/* Start isoc bandwidth "negotiation" at max isoc bandwidth */
+-	alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
+ 	alt->endpoint[0].desc.wMaxPacketSize =
+ 		cpu_to_le16(sd->sensor->max_packet_size[gspca_dev->curr_mode]);
+ 
+@@ -323,6 +336,10 @@ static int stv06xx_isoc_nego(struct gspca_dev *gspca_dev)
+ 	struct usb_host_interface *alt;
+ 	struct sd *sd = (struct sd *) gspca_dev;
+ 
++	/*
++	 * Existence of altsetting and endpoint was verified in
++	 * stv06xx_isoc_init()
++	 */
+ 	alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
+ 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+ 	min_packet_size = sd->sensor->min_packet_size[gspca_dev->curr_mode];
+diff --git a/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c b/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c
+index 6d1007715ff7..ae382b3b5f7f 100644
+--- a/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c
++++ b/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c
+@@ -185,6 +185,10 @@ static int pb0100_start(struct sd *sd)
+ 	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
+ 	if (!alt)
+ 		return -ENODEV;
++
++	if (alt->desc.bNumEndpoints < 1)
++		return -ENODEV;
++
+ 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+ 
+ 	/* If we don't have enough bandwidth use a lower framerate */
+diff --git a/drivers/media/usb/gspca/xirlink_cit.c b/drivers/media/usb/gspca/xirlink_cit.c
+index 934a90bd78c2..c579b100f066 100644
+--- a/drivers/media/usb/gspca/xirlink_cit.c
++++ b/drivers/media/usb/gspca/xirlink_cit.c
+@@ -1442,6 +1442,9 @@ static int cit_get_packet_size(struct gspca_dev *gspca_dev)
+ 		return -EIO;
+ 	}
+ 
++	if (alt->desc.bNumEndpoints < 1)
++		return -ENODEV;
++
+ 	return le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+ }
+ 
+@@ -2626,6 +2629,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
+ 
+ static int sd_isoc_init(struct gspca_dev *gspca_dev)
+ {
++	struct usb_interface_cache *intfc;
+ 	struct usb_host_interface *alt;
+ 	int max_packet_size;
+ 
+@@ -2641,8 +2645,17 @@ static int sd_isoc_init(struct gspca_dev *gspca_dev)
+ 		break;
+ 	}
+ 
++	intfc = gspca_dev->dev->actconfig->intf_cache[0];
++
++	if (intfc->num_altsetting < 2)
++		return -ENODEV;
++
++	alt = &intfc->altsetting[1];
++
++	if (alt->desc.bNumEndpoints < 1)
++		return -ENODEV;
++
+ 	/* Start isoc bandwidth "negotiation" at max isoc bandwidth */
+-	alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
+ 	alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(max_packet_size);
+ 
+ 	return 0;
+@@ -2665,6 +2678,9 @@ static int sd_isoc_nego(struct gspca_dev *gspca_dev)
+ 		break;
+ 	}
+ 
++	/*
++	 * Existence of altsetting and endpoint was verified in sd_isoc_init()
++	 */
+ 	alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
+ 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+ 	if (packet_size <= min_packet_size)
+diff --git a/drivers/media/usb/usbtv/usbtv-core.c b/drivers/media/usb/usbtv/usbtv-core.c
+index 5095c380b2c1..ee9c656d121f 100644
+--- a/drivers/media/usb/usbtv/usbtv-core.c
++++ b/drivers/media/usb/usbtv/usbtv-core.c
+@@ -56,7 +56,7 @@ int usbtv_set_regs(struct usbtv *usbtv, const u16 regs[][2], int size)
+ 
+ 		ret = usb_control_msg(usbtv->udev, pipe, USBTV_REQUEST_REG,
+ 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+-			value, index, NULL, 0, 0);
++			value, index, NULL, 0, USB_CTRL_GET_TIMEOUT);
+ 		if (ret < 0)
+ 			return ret;
+ 	}
+diff --git a/drivers/media/usb/usbtv/usbtv-video.c b/drivers/media/usb/usbtv/usbtv-video.c
+index 3d9284a09ee5..b249f037900c 100644
+--- a/drivers/media/usb/usbtv/usbtv-video.c
++++ b/drivers/media/usb/usbtv/usbtv-video.c
+@@ -800,7 +800,8 @@ static int usbtv_s_ctrl(struct v4l2_ctrl *ctrl)
+ 		ret = usb_control_msg(usbtv->udev,
+ 			usb_rcvctrlpipe(usbtv->udev, 0), USBTV_CONTROL_REG,
+ 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+-			0, USBTV_BASE + 0x0244, (void *)data, 3, 0);
++			0, USBTV_BASE + 0x0244, (void *)data, 3,
++			USB_CTRL_GET_TIMEOUT);
+ 		if (ret < 0)
+ 			goto error;
+ 	}
+@@ -851,7 +852,7 @@ static int usbtv_s_ctrl(struct v4l2_ctrl *ctrl)
+ 	ret = usb_control_msg(usbtv->udev, usb_sndctrlpipe(usbtv->udev, 0),
+ 			USBTV_CONTROL_REG,
+ 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+-			0, index, (void *)data, size, 0);
++			0, index, (void *)data, size, USB_CTRL_SET_TIMEOUT);
+ 
+ error:
+ 	if (ret < 0)
+diff --git a/drivers/media/v4l2-core/v4l2-device.c b/drivers/media/v4l2-core/v4l2-device.c
+index 63d6b147b21e..41da73ce2e98 100644
+--- a/drivers/media/v4l2-core/v4l2-device.c
++++ b/drivers/media/v4l2-core/v4l2-device.c
+@@ -179,6 +179,7 @@ static void v4l2_subdev_release(struct v4l2_subdev *sd)
+ 
+ 	if (sd->internal_ops && sd->internal_ops->release)
+ 		sd->internal_ops->release(sd);
++	sd->devnode = NULL;
+ 	module_put(owner);
+ }
+ 
+diff --git a/drivers/staging/kpc2000/kpc2000/core.c b/drivers/staging/kpc2000/kpc2000/core.c
+index 93cf28febdf6..7b00d7069e21 100644
+--- a/drivers/staging/kpc2000/kpc2000/core.c
++++ b/drivers/staging/kpc2000/kpc2000/core.c
+@@ -110,10 +110,10 @@ static ssize_t cpld_reconfigure(struct device *dev,
+ 				const char *buf, size_t count)
+ {
+ 	struct kp2000_device *pcard = dev_get_drvdata(dev);
+-	long wr_val;
++	unsigned long wr_val;
+ 	int rv;
+ 
+-	rv = kstrtol(buf, 0, &wr_val);
++	rv = kstrtoul(buf, 0, &wr_val);
+ 	if (rv < 0)
+ 		return rv;
+ 	if (wr_val > 7)
+diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
+index 845c8817281c..f7f09c0d273f 100644
+--- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c
++++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
+@@ -32,6 +32,7 @@ static const struct usb_device_id rtw_usb_id_tbl[] = {
+ 	/****** 8188EUS ********/
+ 	{USB_DEVICE(0x056e, 0x4008)}, /* Elecom WDC-150SU2M */
+ 	{USB_DEVICE(0x07b8, 0x8179)}, /* Abocom - Abocom */
++	{USB_DEVICE(0x0B05, 0x18F0)}, /* ASUS USB-N10 Nano B1 */
+ 	{USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */
+ 	{USB_DEVICE(0x2001, 0x3310)}, /* Dlink DWA-123 REV D1 */
+ 	{USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */
+diff --git a/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt b/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt
+index 081d58abd5ac..fca6357e1d45 100644
+--- a/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt
++++ b/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt
+@@ -6,7 +6,7 @@ SPI
+ You have to declare the WFxxx chip in your device tree.
+ 
+ Required properties:
+- - compatible: Should be "silabs,wfx-spi"
++ - compatible: Should be "silabs,wf200"
+  - reg: Chip select address of device
+  - spi-max-frequency: Maximum SPI clocking speed of device in Hz
+  - interrupts-extended: Should contain interrupt line (interrupt-parent +
+@@ -15,6 +15,7 @@ Required properties:
+ Optional properties:
+  - reset-gpios: phandle of gpio that will be used to reset chip during probe.
+    Without this property, you may encounter issues with warm boot.
++   (Legacy: when compatible == "silabs,wfx-spi", the gpio is inverted.)
+ 
+ Please consult Documentation/devicetree/bindings/spi/spi-bus.txt for optional
+ SPI connection related properties,
+@@ -23,12 +24,12 @@ Example:
+ 
+ &spi1 {
+ 	wfx {
+-		compatible = "silabs,wfx-spi";
++		compatible = "silabs,wf200";
+ 		pinctrl-names = "default";
+ 		pinctrl-0 = <&wfx_irq &wfx_gpios>;
+ 		interrupts-extended = <&gpio 16 IRQ_TYPE_EDGE_RISING>;
+ 		wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+-		reset-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
++		reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ 		reg = <0>;
+ 		spi-max-frequency = <42000000>;
+ 	};
+diff --git a/drivers/staging/wfx/bus_sdio.c b/drivers/staging/wfx/bus_sdio.c
+index f8901164c206..5450bd5e1b5d 100644
+--- a/drivers/staging/wfx/bus_sdio.c
++++ b/drivers/staging/wfx/bus_sdio.c
+@@ -200,25 +200,23 @@ static int wfx_sdio_probe(struct sdio_func *func,
+ 	if (ret)
+ 		goto err0;
+ 
+-	ret = wfx_sdio_irq_subscribe(bus);
+-	if (ret)
+-		goto err1;
+-
+ 	bus->core = wfx_init_common(&func->dev, &wfx_sdio_pdata,
+ 				    &wfx_sdio_hwbus_ops, bus);
+ 	if (!bus->core) {
+ 		ret = -EIO;
+-		goto err2;
++		goto err1;
+ 	}
+ 
++	ret = wfx_sdio_irq_subscribe(bus);
++	if (ret)
++		goto err1;
++
+ 	ret = wfx_probe(bus->core);
+ 	if (ret)
+-		goto err3;
++		goto err2;
+ 
+ 	return 0;
+ 
+-err3:
+-	wfx_free_common(bus->core);
+ err2:
+ 	wfx_sdio_irq_unsubscribe(bus);
+ err1:
+@@ -234,7 +232,6 @@ static void wfx_sdio_remove(struct sdio_func *func)
+ 	struct wfx_sdio_priv *bus = sdio_get_drvdata(func);
+ 
+ 	wfx_release(bus->core);
+-	wfx_free_common(bus->core);
+ 	wfx_sdio_irq_unsubscribe(bus);
+ 	sdio_claim_host(func);
+ 	sdio_disable_func(func);
+diff --git a/drivers/staging/wfx/bus_spi.c b/drivers/staging/wfx/bus_spi.c
+index 40bc33035de2..d6a75bd61595 100644
+--- a/drivers/staging/wfx/bus_spi.c
++++ b/drivers/staging/wfx/bus_spi.c
+@@ -27,6 +27,8 @@ MODULE_PARM_DESC(gpio_reset, "gpio number for reset. -1 for none.");
+ #define SET_WRITE 0x7FFF        /* usage: and operation */
+ #define SET_READ 0x8000         /* usage: or operation */
+ 
++#define WFX_RESET_INVERTED 1
++
+ static const struct wfx_platform_data wfx_spi_pdata = {
+ 	.file_fw = "wfm_wf200",
+ 	.file_pds = "wf200.pds",
+@@ -154,6 +156,11 @@ static void wfx_spi_request_rx(struct work_struct *work)
+ 	wfx_bh_request_rx(bus->core);
+ }
+ 
++static void wfx_flush_irq_work(void *w)
++{
++	flush_work(w);
++}
++
+ static size_t wfx_spi_align_size(void *priv, size_t size)
+ {
+ 	// Most of SPI controllers avoid DMA if buffer size is not 32bit aligned
+@@ -201,28 +208,31 @@ static int wfx_spi_probe(struct spi_device *func)
+ 	if (!bus->gpio_reset) {
+ 		dev_warn(&func->dev, "try to load firmware anyway\n");
+ 	} else {
+-		gpiod_set_value(bus->gpio_reset, 0);
+-		udelay(100);
++		if (spi_get_device_id(func)->driver_data & WFX_RESET_INVERTED)
++			gpiod_toggle_active_low(bus->gpio_reset);
+ 		gpiod_set_value(bus->gpio_reset, 1);
++		udelay(100);
++		gpiod_set_value(bus->gpio_reset, 0);
+ 		udelay(2000);
+ 	}
+ 
+-	ret = devm_request_irq(&func->dev, func->irq, wfx_spi_irq_handler,
+-			       IRQF_TRIGGER_RISING, "wfx", bus);
+-	if (ret)
+-		return ret;
+-
+ 	INIT_WORK(&bus->request_rx, wfx_spi_request_rx);
+ 	bus->core = wfx_init_common(&func->dev, &wfx_spi_pdata,
+ 				    &wfx_spi_hwbus_ops, bus);
+ 	if (!bus->core)
+ 		return -EIO;
+ 
+-	ret = wfx_probe(bus->core);
++	ret = devm_add_action_or_reset(&func->dev, wfx_flush_irq_work,
++				       &bus->request_rx);
+ 	if (ret)
+-		wfx_free_common(bus->core);
++		return ret;
+ 
+-	return ret;
++	ret = devm_request_irq(&func->dev, func->irq, wfx_spi_irq_handler,
++			       IRQF_TRIGGER_RISING, "wfx", bus);
++	if (ret)
++		return ret;
++
++	return wfx_probe(bus->core);
+ }
+ 
+ static int wfx_spi_remove(struct spi_device *func)
+@@ -230,11 +240,6 @@ static int wfx_spi_remove(struct spi_device *func)
+ 	struct wfx_spi_priv *bus = spi_get_drvdata(func);
+ 
+ 	wfx_release(bus->core);
+-	wfx_free_common(bus->core);
+-	// A few IRQ will be sent during device release. Hopefully, no IRQ
+-	// should happen after wdev/wvif are released.
+-	devm_free_irq(&func->dev, func->irq, bus);
+-	flush_work(&bus->request_rx);
+ 	return 0;
+ }
+ 
+@@ -244,14 +249,16 @@ static int wfx_spi_remove(struct spi_device *func)
+  * stripped.
+  */
+ static const struct spi_device_id wfx_spi_id[] = {
+-	{ "wfx-spi", 0 },
++	{ "wfx-spi", WFX_RESET_INVERTED },
++	{ "wf200", 0 },
+ 	{ },
+ };
+ MODULE_DEVICE_TABLE(spi, wfx_spi_id);
+ 
+ #ifdef CONFIG_OF
+ static const struct of_device_id wfx_spi_of_match[] = {
+-	{ .compatible = "silabs,wfx-spi" },
++	{ .compatible = "silabs,wfx-spi", .data = (void *)WFX_RESET_INVERTED },
++	{ .compatible = "silabs,wf200" },
+ 	{ },
+ };
+ MODULE_DEVICE_TABLE(of, wfx_spi_of_match);
+diff --git a/drivers/staging/wfx/main.c b/drivers/staging/wfx/main.c
+index 84adad64fc30..76b2ff7fc7fe 100644
+--- a/drivers/staging/wfx/main.c
++++ b/drivers/staging/wfx/main.c
+@@ -262,6 +262,16 @@ static int wfx_send_pdata_pds(struct wfx_dev *wdev)
+ 	return ret;
+ }
+ 
++static void wfx_free_common(void *data)
++{
++	struct wfx_dev *wdev = data;
++
++	mutex_destroy(&wdev->rx_stats_lock);
++	mutex_destroy(&wdev->conf_mutex);
++	wfx_tx_queues_deinit(wdev);
++	ieee80211_free_hw(wdev->hw);
++}
++
+ struct wfx_dev *wfx_init_common(struct device *dev,
+ 				const struct wfx_platform_data *pdata,
+ 				const struct hwbus_ops *hwbus_ops,
+@@ -332,15 +342,10 @@ struct wfx_dev *wfx_init_common(struct device *dev,
+ 	wfx_init_hif_cmd(&wdev->hif_cmd);
+ 	wfx_tx_queues_init(wdev);
+ 
+-	return wdev;
+-}
++	if (devm_add_action_or_reset(dev, wfx_free_common, wdev))
++		return NULL;
+ 
+-void wfx_free_common(struct wfx_dev *wdev)
+-{
+-	mutex_destroy(&wdev->rx_stats_lock);
+-	mutex_destroy(&wdev->conf_mutex);
+-	wfx_tx_queues_deinit(wdev);
+-	ieee80211_free_hw(wdev->hw);
++	return wdev;
+ }
+ 
+ int wfx_probe(struct wfx_dev *wdev)
+diff --git a/drivers/staging/wfx/main.h b/drivers/staging/wfx/main.h
+index 875f8c227803..9c9410072def 100644
+--- a/drivers/staging/wfx/main.h
++++ b/drivers/staging/wfx/main.h
+@@ -34,7 +34,6 @@ struct wfx_dev *wfx_init_common(struct device *dev,
+ 				const struct wfx_platform_data *pdata,
+ 				const struct hwbus_ops *hwbus_ops,
+ 				void *hwbus_priv);
+-void wfx_free_common(struct wfx_dev *wdev);
+ 
+ int wfx_probe(struct wfx_dev *wdev);
+ void wfx_release(struct wfx_dev *wdev);
+diff --git a/drivers/staging/wfx/queue.c b/drivers/staging/wfx/queue.c
+index 0bcc61feee1d..51d6c55ae91f 100644
+--- a/drivers/staging/wfx/queue.c
++++ b/drivers/staging/wfx/queue.c
+@@ -130,12 +130,12 @@ static void wfx_tx_queue_clear(struct wfx_dev *wdev, struct wfx_queue *queue,
+ 	spin_lock_bh(&queue->queue.lock);
+ 	while ((item = __skb_dequeue(&queue->queue)) != NULL)
+ 		skb_queue_head(gc_list, item);
+-	spin_lock_bh(&stats->pending.lock);
++	spin_lock_nested(&stats->pending.lock, 1);
+ 	for (i = 0; i < ARRAY_SIZE(stats->link_map_cache); ++i) {
+ 		stats->link_map_cache[i] -= queue->link_map_cache[i];
+ 		queue->link_map_cache[i] = 0;
+ 	}
+-	spin_unlock_bh(&stats->pending.lock);
++	spin_unlock(&stats->pending.lock);
+ 	spin_unlock_bh(&queue->queue.lock);
+ }
+ 
+@@ -207,9 +207,9 @@ void wfx_tx_queue_put(struct wfx_dev *wdev, struct wfx_queue *queue,
+ 
+ 	++queue->link_map_cache[tx_priv->link_id];
+ 
+-	spin_lock_bh(&stats->pending.lock);
++	spin_lock_nested(&stats->pending.lock, 1);
+ 	++stats->link_map_cache[tx_priv->link_id];
+-	spin_unlock_bh(&stats->pending.lock);
++	spin_unlock(&stats->pending.lock);
+ 	spin_unlock_bh(&queue->queue.lock);
+ }
+ 
+@@ -237,11 +237,11 @@ static struct sk_buff *wfx_tx_queue_get(struct wfx_dev *wdev,
+ 		__skb_unlink(skb, &queue->queue);
+ 		--queue->link_map_cache[tx_priv->link_id];
+ 
+-		spin_lock_bh(&stats->pending.lock);
++		spin_lock_nested(&stats->pending.lock, 1);
+ 		__skb_queue_tail(&stats->pending, skb);
+ 		if (!--stats->link_map_cache[tx_priv->link_id])
+ 			wakeup_stats = true;
+-		spin_unlock_bh(&stats->pending.lock);
++		spin_unlock(&stats->pending.lock);
+ 	}
+ 	spin_unlock_bh(&queue->queue.lock);
+ 	if (wakeup_stats)
+@@ -259,10 +259,10 @@ int wfx_pending_requeue(struct wfx_dev *wdev, struct sk_buff *skb)
+ 	spin_lock_bh(&queue->queue.lock);
+ 	++queue->link_map_cache[tx_priv->link_id];
+ 
+-	spin_lock_bh(&stats->pending.lock);
++	spin_lock_nested(&stats->pending.lock, 1);
+ 	++stats->link_map_cache[tx_priv->link_id];
+ 	__skb_unlink(skb, &stats->pending);
+-	spin_unlock_bh(&stats->pending.lock);
++	spin_unlock(&stats->pending.lock);
+ 	__skb_queue_tail(&queue->queue, skb);
+ 	spin_unlock_bh(&queue->queue.lock);
+ 	return 0;
+diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c b/drivers/staging/wlan-ng/hfa384x_usb.c
+index b71756ab0394..7fe64fcd385d 100644
+--- a/drivers/staging/wlan-ng/hfa384x_usb.c
++++ b/drivers/staging/wlan-ng/hfa384x_usb.c
+@@ -3372,6 +3372,8 @@ static void hfa384x_int_rxmonitor(struct wlandevice *wlandev,
+ 	     WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + WLAN_CRC_LEN)) {
+ 		pr_debug("overlen frm: len=%zd\n",
+ 			 skblen - sizeof(struct p80211_caphdr));
++
++		return;
+ 	}
+ 
+ 	skb = dev_alloc_skb(skblen);
+diff --git a/drivers/staging/wlan-ng/prism2usb.c b/drivers/staging/wlan-ng/prism2usb.c
+index 352556f6870a..4689b2170e4f 100644
+--- a/drivers/staging/wlan-ng/prism2usb.c
++++ b/drivers/staging/wlan-ng/prism2usb.c
+@@ -180,6 +180,7 @@ static void prism2sta_disconnect_usb(struct usb_interface *interface)
+ 
+ 		cancel_work_sync(&hw->link_bh);
+ 		cancel_work_sync(&hw->commsqual_bh);
++		cancel_work_sync(&hw->usb_work);
+ 
+ 		/* Now we complete any outstanding commands
+ 		 * and tell everyone who is waiting for their
+diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
+index 47f09a6ce7bd..84d6f7df09a4 100644
+--- a/drivers/usb/class/cdc-acm.c
++++ b/drivers/usb/class/cdc-acm.c
+@@ -923,16 +923,16 @@ static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss)
+ 
+ 	mutex_lock(&acm->port.mutex);
+ 
+-	if ((ss->close_delay != old_close_delay) ||
+-            (ss->closing_wait != old_closing_wait)) {
+-		if (!capable(CAP_SYS_ADMIN))
++	if (!capable(CAP_SYS_ADMIN)) {
++		if ((ss->close_delay != old_close_delay) ||
++		    (ss->closing_wait != old_closing_wait))
+ 			retval = -EPERM;
+-		else {
+-			acm->port.close_delay  = close_delay;
+-			acm->port.closing_wait = closing_wait;
+-		}
+-	} else
+-		retval = -EOPNOTSUPP;
++		else
++			retval = -EOPNOTSUPP;
++	} else {
++		acm->port.close_delay  = close_delay;
++		acm->port.closing_wait = closing_wait;
++	}
+ 
+ 	mutex_unlock(&acm->port.mutex);
+ 	return retval;
+diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
+index 886c9b602f8c..5267ad2989ee 100644
+--- a/drivers/usb/musb/musb_host.c
++++ b/drivers/usb/musb/musb_host.c
+@@ -1436,10 +1436,7 @@ done:
+ 	 * We need to map sg if the transfer_buffer is
+ 	 * NULL.
+ 	 */
+-	if (!urb->transfer_buffer)
+-		qh->use_sg = true;
+-
+-	if (qh->use_sg) {
++	if (!urb->transfer_buffer) {
+ 		/* sg_miter_start is already done in musb_ep_program */
+ 		if (!sg_miter_next(&qh->sg_miter)) {
+ 			dev_err(musb->controller, "error: sg list empty\n");
+@@ -1447,9 +1444,8 @@ done:
+ 			status = -EINVAL;
+ 			goto done;
+ 		}
+-		urb->transfer_buffer = qh->sg_miter.addr;
+ 		length = min_t(u32, length, qh->sg_miter.length);
+-		musb_write_fifo(hw_ep, length, urb->transfer_buffer);
++		musb_write_fifo(hw_ep, length, qh->sg_miter.addr);
+ 		qh->sg_miter.consumed = length;
+ 		sg_miter_stop(&qh->sg_miter);
+ 	} else {
+@@ -1458,11 +1454,6 @@ done:
+ 
+ 	qh->segsize = length;
+ 
+-	if (qh->use_sg) {
+-		if (offset + length >= urb->transfer_buffer_length)
+-			qh->use_sg = false;
+-	}
+-
+ 	musb_ep_select(mbase, epnum);
+ 	musb_writew(epio, MUSB_TXCSR,
+ 			MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
+@@ -1977,8 +1968,10 @@ finish:
+ 	urb->actual_length += xfer_len;
+ 	qh->offset += xfer_len;
+ 	if (done) {
+-		if (qh->use_sg)
++		if (qh->use_sg) {
+ 			qh->use_sg = false;
++			urb->transfer_buffer = NULL;
++		}
+ 
+ 		if (urb->status == -EINPROGRESS)
+ 			urb->status = status;
+diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
+index 5737add6a2a4..4cca0b836f43 100644
+--- a/drivers/usb/serial/io_edgeport.c
++++ b/drivers/usb/serial/io_edgeport.c
+@@ -710,7 +710,7 @@ static void edge_interrupt_callback(struct urb *urb)
+ 		/* grab the txcredits for the ports if available */
+ 		position = 2;
+ 		portNumber = 0;
+-		while ((position < length) &&
++		while ((position < length - 1) &&
+ 				(portNumber < edge_serial->serial->num_ports)) {
+ 			txCredits = data[position] | (data[position+1] << 8);
+ 			if (txCredits) {
+diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
+index 0b5dcf973d94..8bfffca3e4ae 100644
+--- a/drivers/usb/serial/option.c
++++ b/drivers/usb/serial/option.c
+@@ -1992,8 +1992,14 @@ static const struct usb_device_id option_ids[] = {
+ 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) },	/* D-Link DWM-152/C1 */
+ 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) },	/* D-Link DWM-156/C1 */
+ 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) },	/* D-Link DWM-156/A3 */
++	{ USB_DEVICE_INTERFACE_CLASS(0x1435, 0xd191, 0xff),			/* Wistron Neweb D19Q1 */
++	  .driver_info = RSVD(1) | RSVD(4) },
++	{ USB_DEVICE_INTERFACE_CLASS(0x1690, 0x7588, 0xff),			/* ASKEY WWHC050 */
++	  .driver_info = RSVD(1) | RSVD(4) },
+ 	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff),			/* Olicard 600 */
+ 	  .driver_info = RSVD(4) },
++	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2033, 0xff),			/* BroadMobi BM806U */
++	  .driver_info = RSVD(4) },
+ 	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2060, 0xff),			/* BroadMobi BM818 */
+ 	  .driver_info = RSVD(4) },
+ 	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) },			/* OLICARD300 - MT6225 */
+diff --git a/fs/libfs.c b/fs/libfs.c
+index c686bd9caac6..3759fbacf522 100644
+--- a/fs/libfs.c
++++ b/fs/libfs.c
+@@ -891,7 +891,7 @@ int simple_attr_open(struct inode *inode, struct file *file,
+ {
+ 	struct simple_attr *attr;
+ 
+-	attr = kmalloc(sizeof(*attr), GFP_KERNEL);
++	attr = kzalloc(sizeof(*attr), GFP_KERNEL);
+ 	if (!attr)
+ 		return -ENOMEM;
+ 
+@@ -931,9 +931,11 @@ ssize_t simple_attr_read(struct file *file, char __user *buf,
+ 	if (ret)
+ 		return ret;
+ 
+-	if (*ppos) {		/* continued read */
++	if (*ppos && attr->get_buf[0]) {
++		/* continued read */
+ 		size = strlen(attr->get_buf);
+-	} else {		/* first read */
++	} else {
++		/* first read */
+ 		u64 val;
+ 		ret = attr->get(attr->data, &val);
+ 		if (ret)
+diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
+index 1cc945daa9c8..5080469094af 100644
+--- a/kernel/bpf/verifier.c
++++ b/kernel/bpf/verifier.c
+@@ -1034,17 +1034,6 @@ static void __reg_bound_offset(struct bpf_reg_state *reg)
+ 						 reg->umax_value));
+ }
+ 
+-static void __reg_bound_offset32(struct bpf_reg_state *reg)
+-{
+-	u64 mask = 0xffffFFFF;
+-	struct tnum range = tnum_range(reg->umin_value & mask,
+-				       reg->umax_value & mask);
+-	struct tnum lo32 = tnum_cast(reg->var_off, 4);
+-	struct tnum hi32 = tnum_lshift(tnum_rshift(reg->var_off, 32), 32);
+-
+-	reg->var_off = tnum_or(hi32, tnum_intersect(lo32, range));
+-}
+-
+ /* Reset the min/max bounds of a register */
+ static void __mark_reg_unbounded(struct bpf_reg_state *reg)
+ {
+@@ -5717,10 +5706,6 @@ static void reg_set_min_max(struct bpf_reg_state *true_reg,
+ 	/* We might have learned some bits from the bounds. */
+ 	__reg_bound_offset(false_reg);
+ 	__reg_bound_offset(true_reg);
+-	if (is_jmp32) {
+-		__reg_bound_offset32(false_reg);
+-		__reg_bound_offset32(true_reg);
+-	}
+ 	/* Intersecting with the old var_off might have improved our bounds
+ 	 * slightly.  e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc),
+ 	 * then new var_off is (0; 0x7f...fc) which improves our umax.
+@@ -5830,10 +5815,6 @@ static void reg_set_min_max_inv(struct bpf_reg_state *true_reg,
+ 	/* We might have learned some bits from the bounds. */
+ 	__reg_bound_offset(false_reg);
+ 	__reg_bound_offset(true_reg);
+-	if (is_jmp32) {
+-		__reg_bound_offset32(false_reg);
+-		__reg_bound_offset32(true_reg);
+-	}
+ 	/* Intersecting with the old var_off might have improved our bounds
+ 	 * slightly.  e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc),
+ 	 * then new var_off is (0; 0x7f...fc) which improves our umax.