* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2017-11-12 19:56 Justin Lecher
0 siblings, 0 replies; 57+ messages in thread
From: Justin Lecher @ 2017-11-12 19:56 UTC (permalink / raw
To: gentoo-commits
commit: 59da33de0859235ea550b0bbbc088322e45f9b93
Author: Justin Lecher <jlec <AT> gentoo <DOT> org>
AuthorDate: Sun Nov 12 19:45:39 2017 +0000
Commit: Justin Lecher <jlec <AT> gentoo <DOT> org>
CommitDate: Sun Nov 12 19:56:28 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=59da33de
sys-cluster/slurm: Drop unused eclass
Signed-off-by: Justin Lecher <jlec <AT> gentoo.org>
Package-Manager: Portage-2.3.13, Repoman-2.3.4
sys-cluster/slurm/slurm-16.05.11.ebuild | 2 +-
sys-cluster/slurm/slurm-17.02.9.ebuild | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-cluster/slurm/slurm-16.05.11.ebuild b/sys-cluster/slurm/slurm-16.05.11.ebuild
index 956fa3e1251..3438722b95d 100644
--- a/sys-cluster/slurm/slurm-16.05.11.ebuild
+++ b/sys-cluster/slurm/slurm-16.05.11.ebuild
@@ -22,7 +22,7 @@ else
S="${WORKDIR}/${MY_P}"
fi
-inherit autotools eutils pam perl-module user prefix ${INHERIT_GIT}
+inherit autotools eutils pam perl-module user ${INHERIT_GIT}
DESCRIPTION="SLURM: A Highly Scalable Resource Manager"
HOMEPAGE="https://www.schedmd.com"
diff --git a/sys-cluster/slurm/slurm-17.02.9.ebuild b/sys-cluster/slurm/slurm-17.02.9.ebuild
index dc8afb80830..3f6085571b0 100644
--- a/sys-cluster/slurm/slurm-17.02.9.ebuild
+++ b/sys-cluster/slurm/slurm-17.02.9.ebuild
@@ -22,7 +22,7 @@ else
S="${WORKDIR}/${MY_P}"
fi
-inherit autotools eutils pam perl-module user prefix ${INHERIT_GIT}
+inherit autotools eutils pam perl-module user ${INHERIT_GIT}
DESCRIPTION="A Highly Scalable Resource Manager"
HOMEPAGE="https://www.schedmd.com"
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2025-04-23 8:29 Michał Górny
0 siblings, 0 replies; 57+ messages in thread
From: Michał Górny @ 2025-04-23 8:29 UTC (permalink / raw
To: gentoo-commits
commit: 17ff95cbd567ac4c724a2e6fb29e2a33c751d52f
Author: Michał Górny <mgorny <AT> gentoo <DOT> org>
AuthorDate: Wed Apr 23 08:27:47 2025 +0000
Commit: Michał Górny <mgorny <AT> gentoo <DOT> org>
CommitDate: Wed Apr 23 08:29:42 2025 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=17ff95cb
sys-cluster/slurm: Remove obsolete sci-libs/hdf5 pin
Remove the pin on sci-libs/hdf5, that was added due to a buggy CMake
port of that package, but was not removed when the package reverted
to autotools. That said, upstream fixed the relevant issues
and the package builds fine with my WIP CMake port.
Bug: https://bugs.gentoo.org/813924
Signed-off-by: Michał Górny <mgorny <AT> gentoo.org>
.../slurm/{slurm-22.05.11.ebuild => slurm-22.05.11-r1.ebuild} | 5 ++---
sys-cluster/slurm/{slurm-24.05.3.ebuild => slurm-24.05.3-r1.ebuild} | 5 ++---
2 files changed, 4 insertions(+), 6 deletions(-)
diff --git a/sys-cluster/slurm/slurm-22.05.11.ebuild b/sys-cluster/slurm/slurm-22.05.11-r1.ebuild
similarity index 98%
rename from sys-cluster/slurm/slurm-22.05.11.ebuild
rename to sys-cluster/slurm/slurm-22.05.11-r1.ebuild
index e074bd8ddc39..e93d70dd5775 100644
--- a/sys-cluster/slurm/slurm-22.05.11.ebuild
+++ b/sys-cluster/slurm/slurm-22.05.11-r1.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2024 Gentoo Authors
+# Copyright 1999-2025 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=8
@@ -35,7 +35,6 @@ SLOT="0"
IUSE="X debug hdf5 html ipmi json lua multiple-slurmd +munge mysql numa
nvml ofed pam perl slurmdbd slurmrestd static-libs torque ucx yaml"
-# See bug #813924 for hdf5lib < dep, needs proper fix
COMMON_DEPEND="
!sys-cluster/torque
!net-analyzer/slurm
@@ -53,7 +52,7 @@ COMMON_DEPEND="
lua? ( ${LUA_DEPS} )
ipmi? ( sys-libs/freeipmi )
json? ( dev-libs/json-c:= )
- hdf5? ( <sci-libs/hdf5-1.12:= )
+ hdf5? ( sci-libs/hdf5:= )
numa? ( sys-process/numactl )
nvml? ( dev-util/nvidia-cuda-toolkit x11-drivers/nvidia-drivers )
ofed? ( sys-cluster/rdma-core )
diff --git a/sys-cluster/slurm/slurm-24.05.3.ebuild b/sys-cluster/slurm/slurm-24.05.3-r1.ebuild
similarity index 98%
rename from sys-cluster/slurm/slurm-24.05.3.ebuild
rename to sys-cluster/slurm/slurm-24.05.3-r1.ebuild
index 9c7134d77ef4..bba2a961cc88 100644
--- a/sys-cluster/slurm/slurm-24.05.3.ebuild
+++ b/sys-cluster/slurm/slurm-24.05.3-r1.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2024 Gentoo Authors
+# Copyright 1999-2025 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=8
@@ -35,7 +35,6 @@ SLOT="0"
IUSE="X debug hdf5 html ipmi json lua multiple-slurmd +munge mysql numa
nvml ofed pam perl slurmdbd slurmrestd static-libs torque ucx yaml"
-# See bug #813924 for hdf5lib < dep, needs proper fix
COMMON_DEPEND="
!sys-cluster/torque
!net-analyzer/slurm
@@ -53,7 +52,7 @@ COMMON_DEPEND="
lua? ( ${LUA_DEPS} )
ipmi? ( sys-libs/freeipmi )
json? ( dev-libs/json-c:= )
- hdf5? ( <sci-libs/hdf5-1.12:= )
+ hdf5? ( sci-libs/hdf5:= )
numa? ( sys-process/numactl )
nvml? ( dev-util/nvidia-cuda-toolkit x11-drivers/nvidia-drivers )
ofed? ( sys-cluster/rdma-core )
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2024-10-18 13:47 Benda XU
0 siblings, 0 replies; 57+ messages in thread
From: Benda XU @ 2024-10-18 13:47 UTC (permalink / raw
To: gentoo-commits
commit: d091eed7f221f91edc00370b605d896eaa02e6b4
Author: Benda Xu <heroxbd <AT> gentoo <DOT> org>
AuthorDate: Thu Oct 17 02:36:48 2024 +0000
Commit: Benda XU <heroxbd <AT> gentoo <DOT> org>
CommitDate: Fri Oct 18 13:38:28 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d091eed7
sys-cluster/slurm: all econf arguments into array.
Drop unnecessary htmldir hack.
Closes: https://github.com/gentoo/gentoo/pull/38928
Suggested-by: Sam James <sam <AT> gentoo.org>
Signed-off-by: Benda Xu <heroxbd <AT> gentoo.org>
sys-cluster/slurm/slurm-22.05.11.ebuild | 36 ++++++++++++++-------------------
sys-cluster/slurm/slurm-24.05.3.ebuild | 36 ++++++++++++++-------------------
2 files changed, 30 insertions(+), 42 deletions(-)
diff --git a/sys-cluster/slurm/slurm-22.05.11.ebuild b/sys-cluster/slurm/slurm-22.05.11.ebuild
index dedeb5773dae..e074bd8ddc39 100644
--- a/sys-cluster/slurm/slurm-22.05.11.ebuild
+++ b/sys-cluster/slurm/slurm-22.05.11.ebuild
@@ -139,31 +139,25 @@ src_configure() {
--sysconfdir="${EPREFIX}/etc/${PN}"
--with-hwloc="${EPREFIX}/usr"
--htmldir="${EPREFIX}/usr/share/doc/${PF}"
+ $(use_enable debug)
+ $(use_enable lua)
+ $(use_enable pam)
+ $(use_enable X x11)
+ $(use_with munge)
+ $(use_with json)
+ $(use_with hdf5)
+ $(use_with nvml)
+ $(use_with ofed)
+ $(use_with ucx)
+ $(use_with yaml)
+ $(use_enable static-libs static)
+ $(use_enable slurmrestd)
+ $(use_enable multiple-slurmd)
)
use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
use mysql || myconf+=( --without-mysql_config )
- econf "${myconf[@]}" \
- $(use_enable debug) \
- $(use_enable lua) \
- $(use_enable pam) \
- $(use_enable X x11) \
- $(use_with munge) \
- $(use_with json) \
- $(use_with hdf5) \
- $(use_with nvml) \
- $(use_with ofed) \
- $(use_with ucx) \
- $(use_with yaml) \
- $(use_enable static-libs static) \
- $(use_enable slurmrestd) \
- $(use_enable multiple-slurmd)
+ econf "${myconf[@]}"
- # --htmldir does not seems to propagate... Documentations are installed
- # in /usr/share/doc/slurm-2.3.0/html
- # instead of /usr/share/doc/slurm-2.3.0.2/html
- sed \
- -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
- -i doc/html/Makefile || die
if use perl ; then
# small hack to make it compile
mkdir -p "${S}/src/api/.libs" || die
diff --git a/sys-cluster/slurm/slurm-24.05.3.ebuild b/sys-cluster/slurm/slurm-24.05.3.ebuild
index f254ea437788..9c7134d77ef4 100644
--- a/sys-cluster/slurm/slurm-24.05.3.ebuild
+++ b/sys-cluster/slurm/slurm-24.05.3.ebuild
@@ -135,31 +135,25 @@ src_configure() {
--sysconfdir="${EPREFIX}/etc/${PN}"
--with-hwloc="${EPREFIX}/usr"
--htmldir="${EPREFIX}/usr/share/doc/${PF}"
+ $(use_enable debug)
+ $(use_with lua)
+ $(use_enable pam)
+ $(use_enable X x11)
+ $(use_with munge)
+ $(use_with json)
+ $(use_with hdf5)
+ $(use_with nvml)
+ $(use_with ofed)
+ $(use_with ucx)
+ $(use_with yaml)
+ $(use_enable static-libs static)
+ $(use_enable slurmrestd)
+ $(use_enable multiple-slurmd)
)
use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
use mysql || myconf+=( --without-mysql_config )
- econf "${myconf[@]}" \
- $(use_enable debug) \
- $(use_with lua) \
- $(use_enable pam) \
- $(use_enable X x11) \
- $(use_with munge) \
- $(use_with json) \
- $(use_with hdf5) \
- $(use_with nvml) \
- $(use_with ofed) \
- $(use_with ucx) \
- $(use_with yaml) \
- $(use_enable static-libs static) \
- $(use_enable slurmrestd) \
- $(use_enable multiple-slurmd)
+ econf "${myconf[@]}"
- # --htmldir does not seems to propagate... Documentations are installed
- # in /usr/share/doc/slurm-2.3.0/html
- # instead of /usr/share/doc/slurm-2.3.0.2/html
- sed \
- -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
- -i doc/html/Makefile || die
if use perl ; then
# small hack to make it compile
mkdir -p "${S}/src/api/.libs" || die
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2024-10-18 13:47 Benda XU
0 siblings, 0 replies; 57+ messages in thread
From: Benda XU @ 2024-10-18 13:47 UTC (permalink / raw
To: gentoo-commits
commit: 6b224f6f152cef7558d31bcfe7dd25c1209343ae
Author: Benda Xu <heroxbd <AT> gentoo <DOT> org>
AuthorDate: Thu Oct 10 12:42:19 2024 +0000
Commit: Benda XU <heroxbd <AT> gentoo <DOT> org>
CommitDate: Fri Oct 18 13:37:09 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=6b224f6f
sys-cluster/slurm: QA to bring ebuilds in shape.
1. add remote-id field.
2. move S before IUSE.
3. use tc-ld-force-bfd.
Signed-off-by: Benda Xu <heroxbd <AT> gentoo.org>
sys-cluster/slurm/metadata.xml | 3 +++
sys-cluster/slurm/slurm-22.05.11.ebuild | 5 ++---
sys-cluster/slurm/slurm-24.05.3.ebuild | 5 ++---
3 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/sys-cluster/slurm/metadata.xml b/sys-cluster/slurm/metadata.xml
index 9ddcae0895da..03dd0eb0dcf9 100644
--- a/sys-cluster/slurm/metadata.xml
+++ b/sys-cluster/slurm/metadata.xml
@@ -1,6 +1,9 @@
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE pkgmetadata SYSTEM "https://www.gentoo.org/dtd/metadata.dtd">
<pkgmetadata>
+ <upstream>
+ <remote-id type="github">SchedMD/slurm</remote-id>
+ </upstream>
<maintainer type="person">
<email>alexxy@gentoo.org</email>
<name>Alexey Shvetsov</name>
diff --git a/sys-cluster/slurm/slurm-22.05.11.ebuild b/sys-cluster/slurm/slurm-22.05.11.ebuild
index 3f4b55be81d8..dedeb5773dae 100644
--- a/sys-cluster/slurm/slurm-22.05.11.ebuild
+++ b/sys-cluster/slurm/slurm-22.05.11.ebuild
@@ -29,6 +29,7 @@ DESCRIPTION="A Highly Scalable Resource Manager"
HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
LICENSE="GPL-2"
+S="${WORKDIR}/${MY_P}"
SLOT="0"
IUSE="X debug hdf5 html ipmi json lua multiple-slurmd +munge mysql numa
@@ -79,8 +80,6 @@ REQUIRED_USE="lua? ( ${LUA_REQUIRED_USE} )
torque? ( perl )
slurmrestd? ( json ) "
-S="${WORKDIR}/${MY_P}"
-
LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
@@ -104,7 +103,7 @@ src_unpack() {
}
src_prepare() {
- tc-ld-disable-gold
+ tc-ld-force-bfd
default
# pids should go to /var/run/slurm
diff --git a/sys-cluster/slurm/slurm-24.05.3.ebuild b/sys-cluster/slurm/slurm-24.05.3.ebuild
index 2570ebff8b1b..f254ea437788 100644
--- a/sys-cluster/slurm/slurm-24.05.3.ebuild
+++ b/sys-cluster/slurm/slurm-24.05.3.ebuild
@@ -29,6 +29,7 @@ DESCRIPTION="A Highly Scalable Resource Manager"
HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
LICENSE="GPL-2"
+S="${WORKDIR}/${MY_P}"
SLOT="0"
IUSE="X debug hdf5 html ipmi json lua multiple-slurmd +munge mysql numa
@@ -79,8 +80,6 @@ REQUIRED_USE="lua? ( ${LUA_REQUIRED_USE} )
torque? ( perl )
slurmrestd? ( json ) "
-S="${WORKDIR}/${MY_P}"
-
LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
@@ -100,7 +99,7 @@ src_unpack() {
}
src_prepare() {
- tc-ld-disable-gold
+ tc-ld-force-bfd
default
# pids should go to /var/run/slurm
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2024-10-18 13:47 Benda XU
0 siblings, 0 replies; 57+ messages in thread
From: Benda XU @ 2024-10-18 13:47 UTC (permalink / raw
To: gentoo-commits
commit: f77f6be9737de0f9d1fa729a32eb3ed9c62ca66a
Author: Benda Xu <heroxbd <AT> gentoo <DOT> org>
AuthorDate: Wed Oct 9 10:51:06 2024 +0000
Commit: Benda XU <heroxbd <AT> gentoo <DOT> org>
CommitDate: Fri Oct 18 13:37:07 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=f77f6be9
sys-cluster/slurm: use lazy binding to let plugins work.
Follow the guidence from slurm.spec and Debian turning off -bindnow.
Bug: https://bugs.gentoo.org/698994
Reference: https://salsa.debian.org/hpc-team/slurm-wlm/-/blob/master/debian/rules
Signed-off-by: Benda Xu <heroxbd <AT> gentoo.org>
sys-cluster/slurm/slurm-22.05.11.ebuild | 9 +++++++--
sys-cluster/slurm/slurm-24.05.3.ebuild | 9 +++++++--
2 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/sys-cluster/slurm/slurm-22.05.11.ebuild b/sys-cluster/slurm/slurm-22.05.11.ebuild
index 48a6b283d77a..3f4b55be81d8 100644
--- a/sys-cluster/slurm/slurm-22.05.11.ebuild
+++ b/sys-cluster/slurm/slurm-22.05.11.ebuild
@@ -21,14 +21,18 @@ else
KEYWORDS="~amd64 ~arm64 ~riscv ~x86"
fi
-inherit autotools bash-completion-r1 lua-single pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT} tmpfiles
+inherit autotools bash-completion-r1 flag-o-matic lua-single pam \
+ perl-module prefix toolchain-funcs systemd ${INHERIT_GIT} \
+ tmpfiles
DESCRIPTION="A Highly Scalable Resource Manager"
HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
LICENSE="GPL-2"
SLOT="0"
-IUSE="X debug hdf5 html ipmi json lua multiple-slurmd +munge mysql numa nvml ofed pam perl slurmdbd slurmrestd static-libs torque ucx yaml"
+
+IUSE="X debug hdf5 html ipmi json lua multiple-slurmd +munge mysql numa
+ nvml ofed pam perl slurmdbd slurmrestd static-libs torque ucx yaml"
# See bug #813924 for hdf5lib < dep, needs proper fix
COMMON_DEPEND="
@@ -87,6 +91,7 @@ PATCHES=(
)
pkg_setup() {
+ append-ldflags -Wl,-z,lazy
use lua && lua-single_pkg_setup
}
diff --git a/sys-cluster/slurm/slurm-24.05.3.ebuild b/sys-cluster/slurm/slurm-24.05.3.ebuild
index 1f7beec432cf..2570ebff8b1b 100644
--- a/sys-cluster/slurm/slurm-24.05.3.ebuild
+++ b/sys-cluster/slurm/slurm-24.05.3.ebuild
@@ -21,14 +21,18 @@ else
KEYWORDS="~amd64 ~arm64 ~riscv ~x86"
fi
-inherit autotools bash-completion-r1 lua-single pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT} tmpfiles
+inherit autotools bash-completion-r1 flag-o-matic lua-single pam \
+ perl-module prefix toolchain-funcs systemd ${INHERIT_GIT} \
+ tmpfiles
DESCRIPTION="A Highly Scalable Resource Manager"
HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
LICENSE="GPL-2"
SLOT="0"
-IUSE="X debug hdf5 html ipmi json lua multiple-slurmd +munge mysql numa nvml ofed pam perl slurmdbd slurmrestd static-libs torque ucx yaml"
+
+IUSE="X debug hdf5 html ipmi json lua multiple-slurmd +munge mysql numa
+ nvml ofed pam perl slurmdbd slurmrestd static-libs torque ucx yaml"
# See bug #813924 for hdf5lib < dep, needs proper fix
COMMON_DEPEND="
@@ -83,6 +87,7 @@ LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
RESTRICT="test"
pkg_setup() {
+ append-ldflags -Wl,-z,lazy
use lua && lua-single_pkg_setup
}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2022-10-27 4:48 Sam James
0 siblings, 0 replies; 57+ messages in thread
From: Sam James @ 2022-10-27 4:48 UTC (permalink / raw
To: gentoo-commits
commit: 2a601335b109925d2790d8b8ea08773fc01a604c
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Thu Oct 27 04:28:02 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Thu Oct 27 04:46:10 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=2a601335
sys-cluster/slurm: drop netloc vestige
Closes: https://bugs.gentoo.org/870220
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-cluster/slurm/slurm-22.05.3.ebuild | 1 -
1 file changed, 1 deletion(-)
diff --git a/sys-cluster/slurm/slurm-22.05.3.ebuild b/sys-cluster/slurm/slurm-22.05.3.ebuild
index 0b5e602258f3..a9e9ee8b26b4 100644
--- a/sys-cluster/slurm/slurm-22.05.3.ebuild
+++ b/sys-cluster/slurm/slurm-22.05.3.ebuild
@@ -138,7 +138,6 @@ src_configure() {
)
use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
use mysql || myconf+=( --without-mysql_config )
- use amd64 && myconf+=( $(use_with netloc) )
econf "${myconf[@]}" \
$(use_enable debug) \
$(use_enable lua) \
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2022-10-06 11:14 Joonas Niilola
0 siblings, 0 replies; 57+ messages in thread
From: Joonas Niilola @ 2022-10-06 11:14 UTC (permalink / raw
To: gentoo-commits
commit: a5ed39a0c39115c1f4789bd765cdd1b0e17d1369
Author: Petr Vaněk <arkamar <AT> atlas <DOT> cz>
AuthorDate: Thu Sep 15 08:25:01 2022 +0000
Commit: Joonas Niilola <juippis <AT> gentoo <DOT> org>
CommitDate: Thu Oct 6 11:14:18 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a5ed39a0
sys-cluster/slurm: remove unneeded empty line from metadata
Signed-off-by: Petr Vaněk <arkamar <AT> atlas.cz>
Closes: https://github.com/gentoo/gentoo/pull/27275
Signed-off-by: Joonas Niilola <juippis <AT> gentoo.org>
sys-cluster/slurm/metadata.xml | 1 -
1 file changed, 1 deletion(-)
diff --git a/sys-cluster/slurm/metadata.xml b/sys-cluster/slurm/metadata.xml
index 5f5481fc23fa..aeaca3548e77 100644
--- a/sys-cluster/slurm/metadata.xml
+++ b/sys-cluster/slurm/metadata.xml
@@ -10,7 +10,6 @@
<name>Gentoo Cluster Project</name>
</maintainer>
<use>
-
<flag name="html">Build html documentation</flag>
<flag name="ipmi">Build support for collecting some ipmi stats</flag>
<flag name="json">Add support for json-persing via json-c</flag>
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2022-09-15 8:06 Alexey Shvetsov
0 siblings, 0 replies; 57+ messages in thread
From: Alexey Shvetsov @ 2022-09-15 8:06 UTC (permalink / raw
To: gentoo-commits
commit: 0aea4dac7e2b6099fbe6d299ef0299e04c6832a6
Author: Alexey Shvetsov <alexxy <AT> gentoo <DOT> org>
AuthorDate: Thu Sep 15 08:05:51 2022 +0000
Commit: Alexey Shvetsov <alexxy <AT> gentoo <DOT> org>
CommitDate: Thu Sep 15 08:05:51 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=0aea4dac
sys-cluster/slurm: Should fix possible privilege escalation
Bug: https://bugs.gentoo.org/631552
Signed-off-by: Alexey Shvetsov <alexxy <AT> gentoo.org>
sys-cluster/slurm/slurm-22.05.3.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-cluster/slurm/slurm-22.05.3.ebuild b/sys-cluster/slurm/slurm-22.05.3.ebuild
index 607d3dc407bb..0b5e602258f3 100644
--- a/sys-cluster/slurm/slurm-22.05.3.ebuild
+++ b/sys-cluster/slurm/slurm-22.05.3.ebuild
@@ -243,7 +243,7 @@ pkg_preinst() {
create_folders_and_fix_permissions() {
einfo "Fixing permissions in ${@}"
mkdir -p ${@} || die
- chown -R ${PN}:${PN} ${@} || die
+ chown ${PN}:${PN} ${@} || die
}
pkg_postinst() {
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2022-07-09 8:38 David Seifert
0 siblings, 0 replies; 57+ messages in thread
From: David Seifert @ 2022-07-09 8:38 UTC (permalink / raw
To: gentoo-commits
commit: a5aa10b1fee001e4b9b2ad92de3551406ac57c51
Author: David Seifert <soap <AT> gentoo <DOT> org>
AuthorDate: Sat Jul 9 08:37:58 2022 +0000
Commit: David Seifert <soap <AT> gentoo <DOT> org>
CommitDate: Sat Jul 9 08:37:58 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a5aa10b1
sys-cluster/slurm: remove dead SRC_PREP variable
Signed-off-by: David Seifert <soap <AT> gentoo.org>
sys-cluster/slurm/slurm-20.11.0.1-r104.ebuild | 4 ++--
sys-cluster/slurm/slurm-20.11.0.1-r105.ebuild | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/sys-cluster/slurm/slurm-20.11.0.1-r104.ebuild b/sys-cluster/slurm/slurm-20.11.0.1-r104.ebuild
index a4c90ef8ec66..ffd4361860d3 100644
--- a/sys-cluster/slurm/slurm-20.11.0.1-r104.ebuild
+++ b/sys-cluster/slurm/slurm-20.11.0.1-r104.ebuild
@@ -157,9 +157,9 @@ src_configure() {
touch "${S}/src/api/.libs/libslurm.so" || die
touch "${S}/src/db_api/.libs/libslurmdb.so" || die
cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ S="${LIBSLURM_PERL_S}" perl-module_src_configure
cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_configure
cd "${S}" || die
rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
fi
diff --git a/sys-cluster/slurm/slurm-20.11.0.1-r105.ebuild b/sys-cluster/slurm/slurm-20.11.0.1-r105.ebuild
index dd2ad525430a..0445fde0fe39 100644
--- a/sys-cluster/slurm/slurm-20.11.0.1-r105.ebuild
+++ b/sys-cluster/slurm/slurm-20.11.0.1-r105.ebuild
@@ -156,9 +156,9 @@ src_configure() {
touch "${S}/src/api/.libs/libslurm.so" || die
touch "${S}/src/db_api/.libs/libslurmdb.so" || die
cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ S="${LIBSLURM_PERL_S}" perl-module_src_configure
cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_configure
cd "${S}" || die
rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
fi
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2022-06-26 7:02 Sam James
0 siblings, 0 replies; 57+ messages in thread
From: Sam James @ 2022-06-26 7:02 UTC (permalink / raw
To: gentoo-commits
commit: aa5804fc23f73e7208b06102845271edf0e8f2cc
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Jun 26 06:55:16 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Jun 26 07:02:33 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=aa5804fc
sys-cluster/slurm: unpin hdf5 dep; fix MissingUseDepDefault
We've ported back to autotools in hdf5 for now.
Bug: https://github.com/HDFGroup/hdf5/issues/1814
Closes: https://bugs.gentoo.org/813924
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-cluster/slurm/slurm-20.11.0.1-r105.ebuild | 275 ++++++++++++++++++++++++++
1 file changed, 275 insertions(+)
diff --git a/sys-cluster/slurm/slurm-20.11.0.1-r105.ebuild b/sys-cluster/slurm/slurm-20.11.0.1-r105.ebuild
new file mode 100644
index 000000000000..dd2ad525430a
--- /dev/null
+++ b/sys-cluster/slurm/slurm-20.11.0.1-r105.ebuild
@@ -0,0 +1,275 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+LUA_COMPAT=( lua5-{1..3} )
+
+if [[ ${PV} == *9999* ]]; then
+ EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
+ INHERIT_GIT="git-r3"
+ MY_P="${P}"
+else
+ if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
+ MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
+ else
+ MY_PV=$(ver_rs 1-4 '-') # stable releases
+ fi
+ MY_P="${PN}-${MY_PV}"
+ INHERIT_GIT=""
+ SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
+ KEYWORDS="~amd64 ~arm64 ~riscv ~x86"
+fi
+
+inherit autotools bash-completion-r1 lua-single pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT} tmpfiles
+
+DESCRIPTION="A Highly Scalable Resource Manager"
+HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
+
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
+
+COMMON_DEPEND="
+ !sys-cluster/torque
+ !net-analyzer/slurm
+ !net-analyzer/sinfo
+ || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
+ mysql? (
+ || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
+ slurmdbd? ( || ( dev-db/mariadb:* dev-db/mysql:* ) )
+ )
+ munge? ( sys-auth/munge )
+ pam? ( sys-libs/pam )
+ lua? ( ${LUA_DEPS} )
+ ipmi? ( sys-libs/freeipmi )
+ json? ( dev-libs/json-c:= )
+ amd64? ( netloc? ( >=sys-apps/hwloc-2.1.0:=[netloc(-)] ) )
+ hdf5? ( sci-libs/hdf5:= )
+ numa? ( sys-process/numactl )
+ ofed? ( sys-cluster/rdma-core )
+ ucx? ( sys-cluster/ucx )
+ X? ( net-libs/libssh2 )
+ >=sys-apps/hwloc-1.1.1-r1:=
+ sys-libs/ncurses:0=
+ app-arch/lz4:0=
+ dev-libs/glib:2=
+ sys-libs/readline:0="
+
+DEPEND="${COMMON_DEPEND}
+ html? ( sys-apps/man2html )"
+
+RDEPEND="${COMMON_DEPEND}
+ acct-user/slurm
+ acct-group/slurm
+ dev-libs/libcgroup"
+
+REQUIRED_USE="lua? ( ${LUA_REQUIRED_USE} )
+ torque? ( perl )"
+
+S="${WORKDIR}/${PN}-${MY_P}"
+
+LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
+LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
+
+RESTRICT="test"
+
+PATCHES=(
+ "${FILESDIR}"/${PN}-20.11.0.1_autoconf-lua.patch
+)
+
+pkg_setup() {
+ use lua && lua-single_pkg_setup
+}
+
+src_unpack() {
+ if [[ ${PV} == *9999* ]]; then
+ git-r3_src_unpack
+ else
+ default
+ fi
+}
+
+src_prepare() {
+ tc-ld-disable-gold
+ default
+
+ # pids should go to /var/run/slurm
+ sed \
+ -e 's:/tmp:/var/tmp:g' \
+ -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
+ -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
+ -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
+ -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
+ -i "${S}/etc/slurm.conf.example" \
+ || die "Can't sed for /var/run/slurmctld.pid"
+ sed \
+ -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
+ -i "${S}/etc/slurmdbd.conf.example" \
+ || die "Can't sed for /var/run/slurmdbd.pid"
+ # gentooify systemd services
+ sed \
+ -e 's:sysconfig/.*:conf.d/slurm:g' \
+ -e 's:var/run/:run/slurm/:g' \
+ -e '/^EnvironmentFile=.*/d' \
+ -i "${S}/etc"/*.service.in \
+ || die "Can't sed systemd services for sysconfig or var/run/"
+
+ sed -e '/AM_PATH_GTK_2_0/d' -i configure.ac || die
+
+ hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
+ eautoreconf
+}
+
+src_configure() {
+ local myconf=(
+ --sysconfdir="${EPREFIX}/etc/${PN}"
+ --with-hwloc="${EPREFIX}/usr"
+ --htmldir="${EPREFIX}/usr/share/doc/${PF}"
+ )
+ use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
+ use mysql || myconf+=( --without-mysql_config )
+ use amd64 && myconf+=( $(use_with netloc) )
+ econf "${myconf[@]}" \
+ $(use_enable debug) \
+ $(use_enable lua) \
+ $(use_enable pam) \
+ $(use_enable X x11) \
+ $(use_with munge) \
+ $(use_with json) \
+ $(use_with hdf5) \
+ $(use_with ofed) \
+ $(use_with ucx) \
+ $(use_enable static-libs static) \
+ $(use_enable multiple-slurmd)
+
+ # --htmldir does not seems to propagate... Documentations are installed
+ # in /usr/share/doc/slurm-2.3.0/html
+ # instead of /usr/share/doc/slurm-2.3.0.2/html
+ sed \
+ -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
+ -i doc/html/Makefile || die
+ if use perl ; then
+ # small hack to make it compile
+ mkdir -p "${S}/src/api/.libs" || die
+ mkdir -p "${S}/src/db_api/.libs" || die
+ touch "${S}/src/api/.libs/libslurm.so" || die
+ touch "${S}/src/db_api/.libs/libslurmdb.so" || die
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${S}" || die
+ rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
+ fi
+}
+
+src_compile() {
+ default
+ use pam && emake -C contribs/pam
+ if use perl ; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_compile
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
+ cd "${S}" || die
+ fi
+ use torque && emake -C contribs/torque
+}
+
+src_install() {
+ default
+ use pam && emake DESTDIR="${D}" -C contribs/pam install
+ if use perl; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_install
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_install
+ cd "${S}" || die
+ fi
+ if use torque; then
+ emake DESTDIR="${D}" -C contribs/torque
+ rm -f "${D}"/usr/bin/mpiexec || die
+ fi
+ use static-libs || find "${ED}" -name '*.la' -exec rm {} +
+ # install sample configs
+ keepdir /etc/slurm
+ insinto /etc/slurm
+ doins \
+ etc/prolog.example \
+ etc/cgroup.conf.example \
+ etc/slurm.conf.example \
+ etc/slurmdbd.conf.example
+ exeinto /etc/slurm
+ keepdir /etc/slurm/layouts.d
+ # install init.d files
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
+ # install conf.d files
+ newconfd "${FILESDIR}/slurm.confd" slurm
+ # install logrotate file
+ insinto /etc/logrotate.d
+ newins "${FILESDIR}/logrotate" slurm
+ # install bashcomp
+ newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
+ bashcomp_alias scontrol \
+ sreport sacctmgr squeue scancel sshare sbcast sinfo \
+ sprio sacct salloc sbatch srun sattach sdiag sstat
+ # install systemd files
+ newtmpfiles "${FILESDIR}/slurm.tmpfiles" slurm.conf
+ systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
+}
+
+pkg_preinst() {
+ if use munge; then
+ sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
+ fi
+}
+
+create_folders_and_fix_permissions() {
+ einfo "Fixing permissions in ${@}"
+ mkdir -p ${@} || die
+ chown -R ${PN}:${PN} ${@} || die
+}
+
+pkg_postinst() {
+ paths=(
+ "${EROOT}"/var/${PN}/checkpoint
+ "${EROOT}"/var/${PN}
+ "${EROOT}"/var/spool/${PN}/slurmd
+ "${EROOT}"/var/spool/${PN}
+ "${EROOT}"/var/log/${PN}
+ /var/tmp/${PN}/${PN}d
+ /var/tmp/${PN}
+ /run/${PN}
+ )
+ local folder_path
+ for folder_path in ${paths[@]}; do
+ create_folders_and_fix_permissions $folder_path
+ done
+ echo
+
+ tmpfiles_process slurm.conf
+
+ elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
+ elog "through a (javascript enabled) browser to create a configureation file."
+ elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
+ echo
+ elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
+ elog "Your kernel must be compiled with the wanted cgroup feature:"
+ elog " For the proctrack plugin:"
+ elog " freezer"
+ elog " For the task plugin:"
+ elog " cpuset, memory, devices"
+ elog " For the accounting plugin:"
+ elog " cpuacct, memory, blkio"
+ elog "Then, set these options in /etc/slurm/slurm.conf:"
+ elog " ProctrackType=proctrack/cgroup"
+ elog " TaskPlugin=task/cgroup"
+ einfo
+ ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
+ for folder_path in ${paths[@]}; do
+ ewarn " ${folder_path}"
+ done
+}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2022-02-02 6:21 Sam James
0 siblings, 0 replies; 57+ messages in thread
From: Sam James @ 2022-02-02 6:21 UTC (permalink / raw
To: gentoo-commits
commit: 3c8a20ea993d6d1f7fc669c57452e52d0892cc59
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Wed Feb 2 06:20:53 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Wed Feb 2 06:20:53 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=3c8a20ea
sys-cluster/slurm: Keyword 20.11.0.1-r104 arm64, #829381
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-cluster/slurm/slurm-20.11.0.1-r104.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-cluster/slurm/slurm-20.11.0.1-r104.ebuild b/sys-cluster/slurm/slurm-20.11.0.1-r104.ebuild
index 7e9988bd49b4..a4c90ef8ec66 100644
--- a/sys-cluster/slurm/slurm-20.11.0.1-r104.ebuild
+++ b/sys-cluster/slurm/slurm-20.11.0.1-r104.ebuild
@@ -18,7 +18,7 @@ else
MY_P="${PN}-${MY_PV}"
INHERIT_GIT=""
SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
- KEYWORDS="amd64 ~riscv ~x86"
+ KEYWORDS="amd64 ~arm64 ~riscv ~x86"
fi
inherit autotools bash-completion-r1 lua-single pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT} tmpfiles
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2022-02-02 5:30 Sam James
0 siblings, 0 replies; 57+ messages in thread
From: Sam James @ 2022-02-02 5:30 UTC (permalink / raw
To: gentoo-commits
commit: e68e99f2a0ef13a3b4c265f2287385d7e835e350
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Wed Feb 2 05:30:21 2022 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Wed Feb 2 05:30:21 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e68e99f2
sys-cluster/slurm: Stabilize 20.11.0.1-r104 amd64, #816579
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-cluster/slurm/slurm-20.11.0.1-r104.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-cluster/slurm/slurm-20.11.0.1-r104.ebuild b/sys-cluster/slurm/slurm-20.11.0.1-r104.ebuild
index 378b082b71ea..7e9988bd49b4 100644
--- a/sys-cluster/slurm/slurm-20.11.0.1-r104.ebuild
+++ b/sys-cluster/slurm/slurm-20.11.0.1-r104.ebuild
@@ -18,7 +18,7 @@ else
MY_P="${PN}-${MY_PV}"
INHERIT_GIT=""
SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
- KEYWORDS="~amd64 ~riscv ~x86"
+ KEYWORDS="amd64 ~riscv ~x86"
fi
inherit autotools bash-completion-r1 lua-single pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT} tmpfiles
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2022-01-16 18:47 David Seifert
0 siblings, 0 replies; 57+ messages in thread
From: David Seifert @ 2022-01-16 18:47 UTC (permalink / raw
To: gentoo-commits
commit: 82156a4819d72bd62ed25821ae87e6561b8c8f1d
Author: David Seifert <soap <AT> gentoo <DOT> org>
AuthorDate: Sun Jan 16 18:47:08 2022 +0000
Commit: David Seifert <soap <AT> gentoo <DOT> org>
CommitDate: Sun Jan 16 18:47:08 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=82156a48
sys-cluster/slurm: 'sys-fabric/ofed' → 'sys-cluster/rdma-core'
Bug: https://bugs.gentoo.org/830999
Signed-off-by: David Seifert <soap <AT> gentoo.org>
.../{slurm-20.11.0.1-r103.ebuild => slurm-20.11.0.1-r104.ebuild} | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-cluster/slurm/slurm-20.11.0.1-r103.ebuild b/sys-cluster/slurm/slurm-20.11.0.1-r104.ebuild
similarity index 99%
rename from sys-cluster/slurm/slurm-20.11.0.1-r103.ebuild
rename to sys-cluster/slurm/slurm-20.11.0.1-r104.ebuild
index 3ba3c42e8448..378b082b71ea 100644
--- a/sys-cluster/slurm/slurm-20.11.0.1-r103.ebuild
+++ b/sys-cluster/slurm/slurm-20.11.0.1-r104.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2021 Gentoo Authors
+# Copyright 1999-2022 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=7
@@ -48,7 +48,7 @@ COMMON_DEPEND="
amd64? ( netloc? ( >=sys-apps/hwloc-2.1.0:=[netloc] ) )
hdf5? ( <sci-libs/hdf5-1.12:= )
numa? ( sys-process/numactl )
- ofed? ( sys-fabric/ofed )
+ ofed? ( sys-cluster/rdma-core )
ucx? ( sys-cluster/ucx )
X? ( net-libs/libssh2 )
>=sys-apps/hwloc-1.1.1-r1:=
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2021-10-29 22:44 Sam James
0 siblings, 0 replies; 57+ messages in thread
From: Sam James @ 2021-10-29 22:44 UTC (permalink / raw
To: gentoo-commits
commit: 9dfefb27f6f9d63814ce390cb9638d83ca280e6c
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Oct 29 22:41:14 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Oct 29 22:43:43 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=9dfefb27
sys-cluster/slurm: add hwloc subslot operator
Signed-off-by: Sam James <sam <AT> gentoo.org>
.../{slurm-20.11.0.1-r102.ebuild => slurm-20.11.0.1-r103.ebuild} | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-cluster/slurm/slurm-20.11.0.1-r102.ebuild b/sys-cluster/slurm/slurm-20.11.0.1-r103.ebuild
similarity index 98%
rename from sys-cluster/slurm/slurm-20.11.0.1-r102.ebuild
rename to sys-cluster/slurm/slurm-20.11.0.1-r103.ebuild
index 4ec46d7d5f5..3ba3c42e844 100644
--- a/sys-cluster/slurm/slurm-20.11.0.1-r102.ebuild
+++ b/sys-cluster/slurm/slurm-20.11.0.1-r103.ebuild
@@ -45,13 +45,13 @@ COMMON_DEPEND="
lua? ( ${LUA_DEPS} )
ipmi? ( sys-libs/freeipmi )
json? ( dev-libs/json-c:= )
- amd64? ( netloc? ( >=sys-apps/hwloc-2.1.0[netloc] ) )
+ amd64? ( netloc? ( >=sys-apps/hwloc-2.1.0:=[netloc] ) )
hdf5? ( <sci-libs/hdf5-1.12:= )
numa? ( sys-process/numactl )
ofed? ( sys-fabric/ofed )
ucx? ( sys-cluster/ucx )
X? ( net-libs/libssh2 )
- >=sys-apps/hwloc-1.1.1-r1
+ >=sys-apps/hwloc-1.1.1-r1:=
sys-libs/ncurses:0=
app-arch/lz4:0=
dev-libs/glib:2=
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2021-10-12 7:06 Sam James
0 siblings, 0 replies; 57+ messages in thread
From: Sam James @ 2021-10-12 7:06 UTC (permalink / raw
To: gentoo-commits
commit: b372f20dd03c96d59ee2ef978d76ef174a026ad7
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Tue Oct 12 07:05:57 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Tue Oct 12 07:05:57 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=b372f20d
sys-cluster/slurm: add < dep on hdf5lib for now
Bug: https://bugs.gentoo.org/813924
Signed-off-by: Sam James <sam <AT> gentoo.org>
.../slurm/{slurm-20.11.0.1-r101.ebuild => slurm-20.11.0.1-r102.ebuild} | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild b/sys-cluster/slurm/slurm-20.11.0.1-r102.ebuild
similarity index 98%
rename from sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild
rename to sys-cluster/slurm/slurm-20.11.0.1-r102.ebuild
index f964ff1a8d4..4ec46d7d5f5 100644
--- a/sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild
+++ b/sys-cluster/slurm/slurm-20.11.0.1-r102.ebuild
@@ -30,6 +30,7 @@ LICENSE="GPL-2"
SLOT="0"
IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
+# See bug #813924 for hdf5lib < dep, needs proper fix
COMMON_DEPEND="
!sys-cluster/torque
!net-analyzer/slurm
@@ -45,7 +46,7 @@ COMMON_DEPEND="
ipmi? ( sys-libs/freeipmi )
json? ( dev-libs/json-c:= )
amd64? ( netloc? ( >=sys-apps/hwloc-2.1.0[netloc] ) )
- hdf5? ( sci-libs/hdf5:= )
+ hdf5? ( <sci-libs/hdf5-1.12:= )
numa? ( sys-process/numactl )
ofed? ( sys-fabric/ofed )
ucx? ( sys-cluster/ucx )
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2021-07-30 23:31 Sam James
0 siblings, 0 replies; 57+ messages in thread
From: Sam James @ 2021-07-30 23:31 UTC (permalink / raw
To: gentoo-commits
commit: 4b6fd057b47979a6d444aa79f920c08a3203e7a1
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Jul 30 22:59:17 2021 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Jul 30 23:30:16 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=4b6fd057
sys-cluster/slurm: [QA] call tmpfiles_process in pkg_postinst
This is needed to actually apply the tmpfiles configuration
we've installed in the ebuild. See tmpfiles.eclass documentation.
Package-Manager: Portage-3.0.20, Repoman-3.0.3
Signed-off-by: Sam James <sam <AT> gentoo.org>
sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild b/sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild
index f8a84798d70..f964ff1a8d4 100644
--- a/sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild
+++ b/sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild
@@ -250,6 +250,8 @@ pkg_postinst() {
done
echo
+ tmpfiles_process slurm.conf
+
elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
elog "through a (javascript enabled) browser to create a configureation file."
elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2021-07-05 19:38 Marek Szuba
0 siblings, 0 replies; 57+ messages in thread
From: Marek Szuba @ 2021-07-05 19:38 UTC (permalink / raw
To: gentoo-commits
commit: a17a8b449369e304c9fb14370598f7e305b90210
Author: Marek Szuba <marecki <AT> gentoo <DOT> org>
AuthorDate: Mon Jul 5 18:43:06 2021 +0000
Commit: Marek Szuba <marecki <AT> gentoo <DOT> org>
CommitDate: Mon Jul 5 19:38:07 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a17a8b44
sys-cluster/slurm: only call lua-single_pkg_setup when USE=lua is set
Calling this unconditionally can be a problem when the default Lua
target is not available on a certain architecture, as it is currently
the case with lua5-1 on riscv.
Signed-off-by: Marek Szuba <marecki <AT> gentoo.org>
sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild b/sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild
index 7f857b26e59..e5987b34b2c 100644
--- a/sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild
+++ b/sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild
@@ -78,6 +78,10 @@ PATCHES=(
"${FILESDIR}"/${PN}-20.11.0.1_autoconf-lua.patch
)
+pkg_setup() {
+ use lua && lua-single_pkg_setup
+}
+
src_unpack() {
if [[ ${PV} == *9999* ]]; then
git-r3_src_unpack
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2021-07-05 19:38 Marek Szuba
0 siblings, 0 replies; 57+ messages in thread
From: Marek Szuba @ 2021-07-05 19:38 UTC (permalink / raw
To: gentoo-commits
commit: 4ca510873e64af273205430264b091384317e2d6
Author: Marek Szuba <marecki <AT> gentoo <DOT> org>
AuthorDate: Mon Jul 5 19:34:06 2021 +0000
Commit: Marek Szuba <marecki <AT> gentoo <DOT> org>
CommitDate: Mon Jul 5 19:38:08 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=4ca51087
sys-cluster/slurm: keyword 20.11.0.1-r101 for ~riscv
Signed-off-by: Marek Szuba <marecki <AT> gentoo.org>
sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild b/sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild
index e5987b34b2c..f8a84798d70 100644
--- a/sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild
+++ b/sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild
@@ -18,7 +18,7 @@ else
MY_P="${PN}-${MY_PV}"
INHERIT_GIT=""
SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
- KEYWORDS="~amd64 ~x86"
+ KEYWORDS="~amd64 ~riscv ~x86"
fi
inherit autotools bash-completion-r1 lua-single pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT} tmpfiles
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2021-03-25 23:31 Conrad Kostecki
0 siblings, 0 replies; 57+ messages in thread
From: Conrad Kostecki @ 2021-03-25 23:31 UTC (permalink / raw
To: gentoo-commits
commit: 3df8ac44fd8068ef817463d7172d3659c9b98b5f
Author: Conrad Kostecki <conikost <AT> gentoo <DOT> org>
AuthorDate: Thu Mar 25 23:27:25 2021 +0000
Commit: Conrad Kostecki <conikost <AT> gentoo <DOT> org>
CommitDate: Thu Mar 25 23:31:07 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=3df8ac44
sys-cluster/slurm: drop old version
Drop old version, which does not support slotted lua.
Package-Manager: Portage-3.0.16, Repoman-3.0.2
Signed-off-by: Conrad Kostecki <conikost <AT> gentoo.org>
sys-cluster/slurm/slurm-20.11.0.1-r1.ebuild | 261 ----------------------------
1 file changed, 261 deletions(-)
diff --git a/sys-cluster/slurm/slurm-20.11.0.1-r1.ebuild b/sys-cluster/slurm/slurm-20.11.0.1-r1.ebuild
deleted file mode 100644
index 9601550773f..00000000000
--- a/sys-cluster/slurm/slurm-20.11.0.1-r1.ebuild
+++ /dev/null
@@ -1,261 +0,0 @@
-# Copyright 1999-2021 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-if [[ ${PV} == *9999* ]]; then
- EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
- INHERIT_GIT="git-r3"
- MY_P="${P}"
-else
- if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
- MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
- else
- MY_PV=$(ver_rs 1-4 '-') # stable releases
- fi
- MY_P="${PN}-${MY_PV}"
- INHERIT_GIT=""
- SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
- KEYWORDS="~amd64 ~x86"
-fi
-
-inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT} tmpfiles
-
-DESCRIPTION="A Highly Scalable Resource Manager"
-HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
-
-LICENSE="GPL-2"
-SLOT="0"
-IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
-
-COMMON_DEPEND="
- !sys-cluster/torque
- !net-analyzer/slurm
- !net-analyzer/sinfo
- || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
- mysql? (
- || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
- slurmdbd? ( || ( dev-db/mariadb:* dev-db/mysql:* ) )
- )
- munge? ( sys-auth/munge )
- pam? ( sys-libs/pam )
- lua? ( dev-lang/lua:0= )
- !lua? ( !dev-lang/lua )
- ipmi? ( sys-libs/freeipmi )
- json? ( dev-libs/json-c:= )
- amd64? ( netloc? ( >=sys-apps/hwloc-2.1.0[netloc] ) )
- hdf5? ( sci-libs/hdf5:= )
- numa? ( sys-process/numactl )
- ofed? ( sys-fabric/ofed )
- ucx? ( sys-cluster/ucx )
- X? ( net-libs/libssh2 )
- >=sys-apps/hwloc-1.1.1-r1
- sys-libs/ncurses:0=
- app-arch/lz4:0=
- sys-libs/readline:0="
-
-DEPEND="${COMMON_DEPEND}
- html? ( sys-apps/man2html )"
-
-RDEPEND="${COMMON_DEPEND}
- acct-user/slurm
- acct-group/slurm
- dev-libs/libcgroup"
-
-REQUIRED_USE="torque? ( perl )"
-
-S="${WORKDIR}/${PN}-${MY_P}"
-
-LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
-LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
-
-RESTRICT="test"
-
-src_unpack() {
- if [[ ${PV} == *9999* ]]; then
- git-r3_src_unpack
- else
- default
- fi
-}
-
-src_prepare() {
- tc-ld-disable-gold
- default
-
- # pids should go to /var/run/slurm
- sed \
- -e 's:/tmp:/var/tmp:g' \
- -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
- -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
- -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
- -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
- -i "${S}/etc/slurm.conf.example" \
- || die "Can't sed for /var/run/slurmctld.pid"
- sed \
- -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
- -i "${S}/etc/slurmdbd.conf.example" \
- || die "Can't sed for /var/run/slurmdbd.pid"
- # gentooify systemd services
- sed \
- -e 's:sysconfig/.*:conf.d/slurm:g' \
- -e 's:var/run/:run/slurm/:g' \
- -e '/^EnvironmentFile=.*/d' \
- -i "${S}/etc"/*.service.in \
- || die "Can't sed systemd services for sysconfig or var/run/"
-
- sed -e '/AM_PATH_GTK_2_0/d' -i configure.ac || die
-
- hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
- eautoreconf
-}
-
-src_configure() {
- local myconf=(
- --sysconfdir="${EPREFIX}/etc/${PN}"
- --with-hwloc="${EPREFIX}/usr"
- --htmldir="${EPREFIX}/usr/share/doc/${PF}"
- )
- use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
- use mysql || myconf+=( --without-mysql_config )
- use amd64 && myconf+=( $(use_with netloc) )
- econf "${myconf[@]}" \
- $(use_enable debug) \
- $(use_enable pam) \
- $(use_enable X x11) \
- $(use_with munge) \
- $(use_with json) \
- $(use_with hdf5) \
- $(use_with ofed) \
- $(use_with ucx) \
- $(use_enable static-libs static) \
- $(use_enable multiple-slurmd)
-
- # --htmldir does not seems to propagate... Documentations are installed
- # in /usr/share/doc/slurm-2.3.0/html
- # instead of /usr/share/doc/slurm-2.3.0.2/html
- sed \
- -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
- -i doc/html/Makefile || die
- if use perl ; then
- # small hack to make it compile
- mkdir -p "${S}/src/api/.libs" || die
- mkdir -p "${S}/src/db_api/.libs" || die
- touch "${S}/src/api/.libs/libslurm.so" || die
- touch "${S}/src/db_api/.libs/libslurmdb.so" || die
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${S}" || die
- rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
- fi
-}
-
-src_compile() {
- default
- use pam && emake -C contribs/pam
- if use perl ; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_compile
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
- cd "${S}" || die
- fi
- use torque && emake -C contribs/torque
-}
-
-src_install() {
- default
- use pam && emake DESTDIR="${D}" -C contribs/pam install
- if use perl; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_install
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_install
- cd "${S}" || die
- fi
- if use torque; then
- emake DESTDIR="${D}" -C contribs/torque
- rm -f "${D}"/usr/bin/mpiexec || die
- fi
- use static-libs || find "${ED}" -name '*.la' -exec rm {} +
- # install sample configs
- keepdir /etc/slurm
- insinto /etc/slurm
- doins \
- etc/prolog.example \
- etc/cgroup.conf.example \
- etc/slurm.conf.example \
- etc/slurmdbd.conf.example
- exeinto /etc/slurm
- keepdir /etc/slurm/layouts.d
- # install init.d files
- newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
- newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
- newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
- # install conf.d files
- newconfd "${FILESDIR}/slurm.confd" slurm
- # install logrotate file
- insinto /etc/logrotate.d
- newins "${FILESDIR}/logrotate" slurm
- # install bashcomp
- newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
- bashcomp_alias scontrol \
- sreport sacctmgr squeue scancel sshare sbcast sinfo \
- sprio sacct salloc sbatch srun sattach sdiag sstat
- # install systemd files
- newtmpfiles "${FILESDIR}/slurm.tmpfiles" slurm.conf
- systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
-}
-
-pkg_preinst() {
- if use munge; then
- sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
- fi
-}
-
-create_folders_and_fix_permissions() {
- einfo "Fixing permissions in ${@}"
- mkdir -p ${@} || die
- chown -R ${PN}:${PN} ${@} || die
-}
-
-pkg_postinst() {
- paths=(
- "${EROOT}"/var/${PN}/checkpoint
- "${EROOT}"/var/${PN}
- "${EROOT}"/var/spool/${PN}/slurmd
- "${EROOT}"/var/spool/${PN}
- "${EROOT}"/var/log/${PN}
- /var/tmp/${PN}/${PN}d
- /var/tmp/${PN}
- /run/${PN}
- )
- local folder_path
- for folder_path in ${paths[@]}; do
- create_folders_and_fix_permissions $folder_path
- done
- echo
-
- elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
- elog "through a (javascript enabled) browser to create a configureation file."
- elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
- echo
- elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
- elog "Your kernel must be compiled with the wanted cgroup feature:"
- elog " For the proctrack plugin:"
- elog " freezer"
- elog " For the task plugin:"
- elog " cpuset, memory, devices"
- elog " For the accounting plugin:"
- elog " cpuacct, memory, blkio"
- elog "Then, set these options in /etc/slurm/slurm.conf:"
- elog " ProctrackType=proctrack/cgroup"
- elog " TaskPlugin=task/cgroup"
- einfo
- ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
- for folder_path in ${paths[@]}; do
- ewarn " ${folder_path}"
- done
-}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2021-03-13 17:24 David Seifert
0 siblings, 0 replies; 57+ messages in thread
From: David Seifert @ 2021-03-13 17:24 UTC (permalink / raw
To: gentoo-commits
commit: a04b036f648d0a1999489a520aabdf7657bc7f74
Author: David Seifert <soap <AT> gentoo <DOT> org>
AuthorDate: Sat Mar 13 17:24:01 2021 +0000
Commit: David Seifert <soap <AT> gentoo <DOT> org>
CommitDate: Sat Mar 13 17:24:01 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a04b036f
sys-cluster/slurm: Remove sys-apps/netloc dependency
* sys-apps/netloc is completely broken and will be
removed from the tree soon.
Package-Manager: Portage-3.0.17, Repoman-3.0.2
Signed-off-by: David Seifert <soap <AT> gentoo.org>
sys-cluster/slurm/{slurm-20.11.0.1.ebuild => slurm-20.11.0.1-r1.ebuild} | 2 +-
.../slurm/{slurm-20.11.0.1-r100.ebuild => slurm-20.11.0.1-r101.ebuild} | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-cluster/slurm/slurm-20.11.0.1.ebuild b/sys-cluster/slurm/slurm-20.11.0.1-r1.ebuild
similarity index 98%
rename from sys-cluster/slurm/slurm-20.11.0.1.ebuild
rename to sys-cluster/slurm/slurm-20.11.0.1-r1.ebuild
index 78837b1cd3d..9601550773f 100644
--- a/sys-cluster/slurm/slurm-20.11.0.1.ebuild
+++ b/sys-cluster/slurm/slurm-20.11.0.1-r1.ebuild
@@ -43,7 +43,7 @@ COMMON_DEPEND="
!lua? ( !dev-lang/lua )
ipmi? ( sys-libs/freeipmi )
json? ( dev-libs/json-c:= )
- amd64? ( netloc? ( || ( sys-apps/netloc >=sys-apps/hwloc-2.1.0[netloc] ) ) )
+ amd64? ( netloc? ( >=sys-apps/hwloc-2.1.0[netloc] ) )
hdf5? ( sci-libs/hdf5:= )
numa? ( sys-process/numactl )
ofed? ( sys-fabric/ofed )
diff --git a/sys-cluster/slurm/slurm-20.11.0.1-r100.ebuild b/sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild
similarity index 99%
rename from sys-cluster/slurm/slurm-20.11.0.1-r100.ebuild
rename to sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild
index 860e614604a..7f857b26e59 100644
--- a/sys-cluster/slurm/slurm-20.11.0.1-r100.ebuild
+++ b/sys-cluster/slurm/slurm-20.11.0.1-r101.ebuild
@@ -44,7 +44,7 @@ COMMON_DEPEND="
lua? ( ${LUA_DEPS} )
ipmi? ( sys-libs/freeipmi )
json? ( dev-libs/json-c:= )
- amd64? ( netloc? ( || ( sys-apps/netloc >=sys-apps/hwloc-2.1.0[netloc] ) ) )
+ amd64? ( netloc? ( >=sys-apps/hwloc-2.1.0[netloc] ) )
hdf5? ( sci-libs/hdf5:= )
numa? ( sys-process/numactl )
ofed? ( sys-fabric/ofed )
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2021-03-07 11:58 David Seifert
0 siblings, 0 replies; 57+ messages in thread
From: David Seifert @ 2021-03-07 11:58 UTC (permalink / raw
To: gentoo-commits
commit: 2fe3a25abf359db42c9eaec21520b1d3f4e81808
Author: Theo Anderson <telans <AT> posteo <DOT> de>
AuthorDate: Sun Mar 7 11:57:40 2021 +0000
Commit: David Seifert <soap <AT> gentoo <DOT> org>
CommitDate: Sun Mar 7 11:57:40 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=2fe3a25a
sys-cluster/slurm: migrate to tmpfiles.eclass
Package-Manager: Portage-3.0.16, Repoman-3.0.2
Signed-off-by: Theo Anderson <telans <AT> posteo.de>
Signed-off-by: David Seifert <soap <AT> gentoo.org>
sys-cluster/slurm/slurm-20.11.0.1-r100.ebuild | 6 +++---
sys-cluster/slurm/slurm-20.11.0.1.ebuild | 6 +++---
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/sys-cluster/slurm/slurm-20.11.0.1-r100.ebuild b/sys-cluster/slurm/slurm-20.11.0.1-r100.ebuild
index ab498c39729..860e614604a 100644
--- a/sys-cluster/slurm/slurm-20.11.0.1-r100.ebuild
+++ b/sys-cluster/slurm/slurm-20.11.0.1-r100.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2020 Gentoo Authors
+# Copyright 1999-2021 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=7
@@ -21,7 +21,7 @@ else
KEYWORDS="~amd64 ~x86"
fi
-inherit autotools bash-completion-r1 lua-single pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
+inherit autotools bash-completion-r1 lua-single pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT} tmpfiles
DESCRIPTION="A Highly Scalable Resource Manager"
HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
@@ -213,7 +213,7 @@ src_install() {
sreport sacctmgr squeue scancel sshare sbcast sinfo \
sprio sacct salloc sbatch srun sattach sdiag sstat
# install systemd files
- systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
+ newtmpfiles "${FILESDIR}/slurm.tmpfiles" slurm.conf
systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
}
diff --git a/sys-cluster/slurm/slurm-20.11.0.1.ebuild b/sys-cluster/slurm/slurm-20.11.0.1.ebuild
index e74fe466f7e..78837b1cd3d 100644
--- a/sys-cluster/slurm/slurm-20.11.0.1.ebuild
+++ b/sys-cluster/slurm/slurm-20.11.0.1.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2020 Gentoo Authors
+# Copyright 1999-2021 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=7
@@ -19,7 +19,7 @@ else
KEYWORDS="~amd64 ~x86"
fi
-inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
+inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT} tmpfiles
DESCRIPTION="A Highly Scalable Resource Manager"
HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
@@ -205,7 +205,7 @@ src_install() {
sreport sacctmgr squeue scancel sshare sbcast sinfo \
sprio sacct salloc sbatch srun sattach sdiag sstat
# install systemd files
- systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
+ newtmpfiles "${FILESDIR}/slurm.tmpfiles" slurm.conf
systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2021-01-05 15:17 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2021-01-05 15:17 UTC (permalink / raw
To: gentoo-commits
commit: f89eb6a135bfee35b22e3075dbe0caec6c875e55
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Tue Jan 5 15:16:13 2021 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Tue Jan 5 15:16:13 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=f89eb6a1
sys-cluster/slurm: Drop myself from metadata
Package-Manager: Portage-3.0.12, Repoman-3.0.2
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/metadata.xml | 4 ----
1 file changed, 4 deletions(-)
diff --git a/sys-cluster/slurm/metadata.xml b/sys-cluster/slurm/metadata.xml
index f4298bcbe29..3dc0121151f 100644
--- a/sys-cluster/slurm/metadata.xml
+++ b/sys-cluster/slurm/metadata.xml
@@ -5,10 +5,6 @@
<email>alexxy@gentoo.org</email>
<name>Alexey Shvetsov</name>
</maintainer>
- <maintainer type="person">
- <email>zlogene@gentoo.org</email>
- <name>Mikle Kolyada</name>
- </maintainer>
<maintainer type="project">
<email>cluster@gentoo.org</email>
<name>Gentoo Cluster Project</name>
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2020-12-01 12:16 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2020-12-01 12:16 UTC (permalink / raw
To: gentoo-commits
commit: f1e50c073e77c9979e71d4fda0f8d21b99f4d2d1
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Tue Dec 1 12:15:53 2020 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Tue Dec 1 12:15:53 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=f1e50c07
sys-cluster/slurm: Drop old
Package-Manager: Portage-3.0.8, Repoman-3.0.2
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/Manifest | 2 -
sys-cluster/slurm/slurm-20.02.4.1.ebuild | 265 -------------------------------
sys-cluster/slurm/slurm-20.02.5.1.ebuild | 265 -------------------------------
3 files changed, 532 deletions(-)
diff --git a/sys-cluster/slurm/Manifest b/sys-cluster/slurm/Manifest
index 882131982a9..ba0ae40fe89 100644
--- a/sys-cluster/slurm/Manifest
+++ b/sys-cluster/slurm/Manifest
@@ -1,3 +1 @@
-DIST slurm-20-02-4-1.tar.gz 8689917 BLAKE2B 69d78b7f82065f7ca1c869c0648012cc23e746c81b1a76d612d96fe2c6c66cc2fc1727a1e164a0f6d338b568c45bb1ac78b815181325a3982957683b77ae60d5 SHA512 932989a3c03468783d244d9925472fb9bb4dd0007a91dccc37a3b12763ed81902ad0dc039b8527526bde58f7540d056727df4cdab7581182b028f67e597fb7d5
-DIST slurm-20-02-5-1.tar.gz 8690263 BLAKE2B dd05ea11cd59385135d8988b6490d3aea6aed9e487afb8e920fc5104408fb8b440c8e8af85732f888841d5d7f9a09e95e3df7cb91b5d0fa855ff9b2127265263 SHA512 3eaeee276453ab9aea4f0eb921e8172a912b86d59a93756fc0b83a8c08eeda04c9f3cf64a33d2eab0b8e8daefb19c0e0bfcb895a5aefb327eaf18ed4e216161d
DIST slurm-20-11-0-1.tar.gz 8762691 BLAKE2B 1e24a04b3faf97f4df98bd982d67d47f79670b863f466326e45e00fac0b99124122e94e30054a97471e4337234cbd213806791bdd5b3bddfeb05bef55f42931e SHA512 9a57f2610f7294ba6cd265746b874e32a7930100f30c0adf41d95b261787c441bdcacaa641f0b9785150b94fc7d6b5b7608ec618f668bffcae6f774752f17678
diff --git a/sys-cluster/slurm/slurm-20.02.4.1.ebuild b/sys-cluster/slurm/slurm-20.02.4.1.ebuild
deleted file mode 100644
index 74a772b3b66..00000000000
--- a/sys-cluster/slurm/slurm-20.02.4.1.ebuild
+++ /dev/null
@@ -1,265 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-if [[ ${PV} == *9999* ]]; then
- EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
- INHERIT_GIT="git-r3"
- MY_P="${P}"
-else
- if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
- MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
- else
- MY_PV=$(ver_rs 1-4 '-') # stable releases
- fi
- MY_P="${PN}-${MY_PV}"
- INHERIT_GIT=""
- SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
- KEYWORDS="~amd64 ~x86"
-fi
-
-inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
-
-DESCRIPTION="A Highly Scalable Resource Manager"
-HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
-
-LICENSE="GPL-2"
-SLOT="0"
-IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
-
-COMMON_DEPEND="
- !sys-cluster/torque
- !net-analyzer/slurm
- !net-analyzer/sinfo
- || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
- mysql? (
- || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
- slurmdbd? ( || ( dev-db/mariadb:* dev-db/mysql:* ) )
- )
- munge? ( sys-auth/munge )
- pam? ( sys-libs/pam )
- lua? ( dev-lang/lua:0= )
- !lua? ( !dev-lang/lua )
- ipmi? ( sys-libs/freeipmi )
- json? ( dev-libs/json-c:= )
- amd64? ( netloc? ( || ( sys-apps/netloc >=sys-apps/hwloc-2.1.0[netloc] ) ) )
- hdf5? ( sci-libs/hdf5:= )
- numa? ( sys-process/numactl )
- ofed? ( sys-fabric/ofed )
- ucx? ( sys-cluster/ucx )
- X? ( net-libs/libssh2 )
- >=sys-apps/hwloc-1.1.1-r1
- sys-libs/ncurses:0=
- app-arch/lz4:0=
- sys-libs/readline:0="
-
-DEPEND="${COMMON_DEPEND}
- html? ( sys-apps/man2html )"
-
-RDEPEND="${COMMON_DEPEND}
- acct-user/slurm
- acct-group/slurm
- dev-libs/libcgroup"
-
-REQUIRED_USE="torque? ( perl )"
-
-S="${WORKDIR}/${PN}-${MY_P}"
-
-LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
-LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
-
-RESTRICT="test"
-
-src_unpack() {
- if [[ ${PV} == *9999* ]]; then
- git-r3_src_unpack
- else
- default
- fi
-}
-
-src_prepare() {
- tc-ld-disable-gold
- default
-
- # pids should go to /var/run/slurm
- sed \
- -e 's:/tmp:/var/tmp:g' \
- -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
- -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
- -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
- -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
- -i "${S}/etc/slurm.conf.example" \
- || die "Can't sed for /var/run/slurmctld.pid"
- sed \
- -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
- -i "${S}/etc/slurmdbd.conf.example" \
- || die "Can't sed for /var/run/slurmdbd.pid"
- # gentooify systemd services
- sed \
- -e 's:sysconfig/.*:conf.d/slurm:g' \
- -e 's:var/run/:run/slurm/:g' \
- -e '/^EnvironmentFile=.*/d' \
- -i "${S}/etc"/*.service.in \
- || die "Can't sed systemd services for sysconfig or var/run/"
-
- sed -e '/AM_PATH_GTK_2_0/d' -i configure.ac || die
-
- hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
- eautoreconf
-}
-
-src_configure() {
- local myconf=(
- --sysconfdir="${EPREFIX}/etc/${PN}"
- --with-hwloc="${EPREFIX}/usr"
- --htmldir="${EPREFIX}/usr/share/doc/${PF}"
- )
- use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
- use mysql || myconf+=( --without-mysql_config )
- use amd64 && myconf+=( $(use_with netloc) )
- econf "${myconf[@]}" \
- $(use_enable debug) \
- $(use_enable pam) \
- $(use_enable X x11) \
- $(use_with munge) \
- $(use_with json) \
- $(use_with hdf5) \
- $(use_with ofed) \
- $(use_with ucx) \
- $(use_enable static-libs static) \
- $(use_enable multiple-slurmd)
-
- # --htmldir does not seems to propagate... Documentations are installed
- # in /usr/share/doc/slurm-2.3.0/html
- # instead of /usr/share/doc/slurm-2.3.0.2/html
- sed \
- -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
- -i doc/html/Makefile || die
- if use perl ; then
- # small hack to make it compile
- mkdir -p "${S}/src/api/.libs" || die
- mkdir -p "${S}/src/db_api/.libs" || die
- touch "${S}/src/api/.libs/libslurm.so" || die
- touch "${S}/src/db_api/.libs/libslurmdb.so" || die
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${S}" || die
- rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
- fi
-}
-
-src_compile() {
- default
- use pam && emake -C contribs/pam
- if use perl ; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_compile
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
- cd "${S}" || die
- fi
- use torque && emake -C contribs/torque
-}
-
-src_install() {
- default
- use pam && emake DESTDIR="${D}" -C contribs/pam install
- if use perl; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_install
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_install
- cd "${S}" || die
- fi
- if use torque; then
- emake DESTDIR="${D}" -C contribs/torque
- rm -f "${D}"/usr/bin/mpiexec || die
- fi
- use static-libs || find "${ED}" -name '*.la' -exec rm {} +
- # install sample configs
- keepdir /etc/slurm
- insinto /etc/slurm
- doins \
- etc/prolog.example \
- etc/cgroup.conf.example \
- etc/slurm.conf.example \
- etc/slurmdbd.conf.example
- exeinto /etc/slurm
- keepdir /etc/slurm/layouts.d
- insinto /etc/slurm/layouts.d
- newins etc/layouts.d.power.conf.example power.conf.example
- newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
- newins etc/layouts.d.unit.conf.example unit.conf.example
- # install init.d files
- newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
- newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
- newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
- # install conf.d files
- newconfd "${FILESDIR}/slurm.confd" slurm
- # install logrotate file
- insinto /etc/logrotate.d
- newins "${FILESDIR}/logrotate" slurm
- # install bashcomp
- newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
- bashcomp_alias scontrol \
- sreport sacctmgr squeue scancel sshare sbcast sinfo \
- sprio sacct salloc sbatch srun sattach sdiag sstat
- # install systemd files
- systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
- systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
-}
-
-pkg_preinst() {
- if use munge; then
- sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
- fi
-}
-
-create_folders_and_fix_permissions() {
- einfo "Fixing permissions in ${@}"
- mkdir -p ${@} || die
- chown -R ${PN}:${PN} ${@} || die
-}
-
-pkg_postinst() {
- paths=(
- "${EROOT}"/var/${PN}/checkpoint
- "${EROOT}"/var/${PN}
- "${EROOT}"/var/spool/${PN}/slurmd
- "${EROOT}"/var/spool/${PN}
- "${EROOT}"/var/log/${PN}
- /var/tmp/${PN}/${PN}d
- /var/tmp/${PN}
- /run/${PN}
- )
- local folder_path
- for folder_path in ${paths[@]}; do
- create_folders_and_fix_permissions $folder_path
- done
- echo
-
- elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
- elog "through a (javascript enabled) browser to create a configureation file."
- elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
- echo
- elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
- elog "Your kernel must be compiled with the wanted cgroup feature:"
- elog " For the proctrack plugin:"
- elog " freezer"
- elog " For the task plugin:"
- elog " cpuset, memory, devices"
- elog " For the accounting plugin:"
- elog " cpuacct, memory, blkio"
- elog "Then, set these options in /etc/slurm/slurm.conf:"
- elog " ProctrackType=proctrack/cgroup"
- elog " TaskPlugin=task/cgroup"
- einfo
- ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
- for folder_path in ${paths[@]}; do
- ewarn " ${folder_path}"
- done
-}
diff --git a/sys-cluster/slurm/slurm-20.02.5.1.ebuild b/sys-cluster/slurm/slurm-20.02.5.1.ebuild
deleted file mode 100644
index 74a772b3b66..00000000000
--- a/sys-cluster/slurm/slurm-20.02.5.1.ebuild
+++ /dev/null
@@ -1,265 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-if [[ ${PV} == *9999* ]]; then
- EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
- INHERIT_GIT="git-r3"
- MY_P="${P}"
-else
- if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
- MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
- else
- MY_PV=$(ver_rs 1-4 '-') # stable releases
- fi
- MY_P="${PN}-${MY_PV}"
- INHERIT_GIT=""
- SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
- KEYWORDS="~amd64 ~x86"
-fi
-
-inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
-
-DESCRIPTION="A Highly Scalable Resource Manager"
-HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
-
-LICENSE="GPL-2"
-SLOT="0"
-IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
-
-COMMON_DEPEND="
- !sys-cluster/torque
- !net-analyzer/slurm
- !net-analyzer/sinfo
- || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
- mysql? (
- || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
- slurmdbd? ( || ( dev-db/mariadb:* dev-db/mysql:* ) )
- )
- munge? ( sys-auth/munge )
- pam? ( sys-libs/pam )
- lua? ( dev-lang/lua:0= )
- !lua? ( !dev-lang/lua )
- ipmi? ( sys-libs/freeipmi )
- json? ( dev-libs/json-c:= )
- amd64? ( netloc? ( || ( sys-apps/netloc >=sys-apps/hwloc-2.1.0[netloc] ) ) )
- hdf5? ( sci-libs/hdf5:= )
- numa? ( sys-process/numactl )
- ofed? ( sys-fabric/ofed )
- ucx? ( sys-cluster/ucx )
- X? ( net-libs/libssh2 )
- >=sys-apps/hwloc-1.1.1-r1
- sys-libs/ncurses:0=
- app-arch/lz4:0=
- sys-libs/readline:0="
-
-DEPEND="${COMMON_DEPEND}
- html? ( sys-apps/man2html )"
-
-RDEPEND="${COMMON_DEPEND}
- acct-user/slurm
- acct-group/slurm
- dev-libs/libcgroup"
-
-REQUIRED_USE="torque? ( perl )"
-
-S="${WORKDIR}/${PN}-${MY_P}"
-
-LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
-LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
-
-RESTRICT="test"
-
-src_unpack() {
- if [[ ${PV} == *9999* ]]; then
- git-r3_src_unpack
- else
- default
- fi
-}
-
-src_prepare() {
- tc-ld-disable-gold
- default
-
- # pids should go to /var/run/slurm
- sed \
- -e 's:/tmp:/var/tmp:g' \
- -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
- -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
- -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
- -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
- -i "${S}/etc/slurm.conf.example" \
- || die "Can't sed for /var/run/slurmctld.pid"
- sed \
- -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
- -i "${S}/etc/slurmdbd.conf.example" \
- || die "Can't sed for /var/run/slurmdbd.pid"
- # gentooify systemd services
- sed \
- -e 's:sysconfig/.*:conf.d/slurm:g' \
- -e 's:var/run/:run/slurm/:g' \
- -e '/^EnvironmentFile=.*/d' \
- -i "${S}/etc"/*.service.in \
- || die "Can't sed systemd services for sysconfig or var/run/"
-
- sed -e '/AM_PATH_GTK_2_0/d' -i configure.ac || die
-
- hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
- eautoreconf
-}
-
-src_configure() {
- local myconf=(
- --sysconfdir="${EPREFIX}/etc/${PN}"
- --with-hwloc="${EPREFIX}/usr"
- --htmldir="${EPREFIX}/usr/share/doc/${PF}"
- )
- use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
- use mysql || myconf+=( --without-mysql_config )
- use amd64 && myconf+=( $(use_with netloc) )
- econf "${myconf[@]}" \
- $(use_enable debug) \
- $(use_enable pam) \
- $(use_enable X x11) \
- $(use_with munge) \
- $(use_with json) \
- $(use_with hdf5) \
- $(use_with ofed) \
- $(use_with ucx) \
- $(use_enable static-libs static) \
- $(use_enable multiple-slurmd)
-
- # --htmldir does not seems to propagate... Documentations are installed
- # in /usr/share/doc/slurm-2.3.0/html
- # instead of /usr/share/doc/slurm-2.3.0.2/html
- sed \
- -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
- -i doc/html/Makefile || die
- if use perl ; then
- # small hack to make it compile
- mkdir -p "${S}/src/api/.libs" || die
- mkdir -p "${S}/src/db_api/.libs" || die
- touch "${S}/src/api/.libs/libslurm.so" || die
- touch "${S}/src/db_api/.libs/libslurmdb.so" || die
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${S}" || die
- rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
- fi
-}
-
-src_compile() {
- default
- use pam && emake -C contribs/pam
- if use perl ; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_compile
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
- cd "${S}" || die
- fi
- use torque && emake -C contribs/torque
-}
-
-src_install() {
- default
- use pam && emake DESTDIR="${D}" -C contribs/pam install
- if use perl; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_install
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_install
- cd "${S}" || die
- fi
- if use torque; then
- emake DESTDIR="${D}" -C contribs/torque
- rm -f "${D}"/usr/bin/mpiexec || die
- fi
- use static-libs || find "${ED}" -name '*.la' -exec rm {} +
- # install sample configs
- keepdir /etc/slurm
- insinto /etc/slurm
- doins \
- etc/prolog.example \
- etc/cgroup.conf.example \
- etc/slurm.conf.example \
- etc/slurmdbd.conf.example
- exeinto /etc/slurm
- keepdir /etc/slurm/layouts.d
- insinto /etc/slurm/layouts.d
- newins etc/layouts.d.power.conf.example power.conf.example
- newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
- newins etc/layouts.d.unit.conf.example unit.conf.example
- # install init.d files
- newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
- newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
- newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
- # install conf.d files
- newconfd "${FILESDIR}/slurm.confd" slurm
- # install logrotate file
- insinto /etc/logrotate.d
- newins "${FILESDIR}/logrotate" slurm
- # install bashcomp
- newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
- bashcomp_alias scontrol \
- sreport sacctmgr squeue scancel sshare sbcast sinfo \
- sprio sacct salloc sbatch srun sattach sdiag sstat
- # install systemd files
- systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
- systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
-}
-
-pkg_preinst() {
- if use munge; then
- sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
- fi
-}
-
-create_folders_and_fix_permissions() {
- einfo "Fixing permissions in ${@}"
- mkdir -p ${@} || die
- chown -R ${PN}:${PN} ${@} || die
-}
-
-pkg_postinst() {
- paths=(
- "${EROOT}"/var/${PN}/checkpoint
- "${EROOT}"/var/${PN}
- "${EROOT}"/var/spool/${PN}/slurmd
- "${EROOT}"/var/spool/${PN}
- "${EROOT}"/var/log/${PN}
- /var/tmp/${PN}/${PN}d
- /var/tmp/${PN}
- /run/${PN}
- )
- local folder_path
- for folder_path in ${paths[@]}; do
- create_folders_and_fix_permissions $folder_path
- done
- echo
-
- elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
- elog "through a (javascript enabled) browser to create a configureation file."
- elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
- echo
- elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
- elog "Your kernel must be compiled with the wanted cgroup feature:"
- elog " For the proctrack plugin:"
- elog " freezer"
- elog " For the task plugin:"
- elog " cpuset, memory, devices"
- elog " For the accounting plugin:"
- elog " cpuacct, memory, blkio"
- elog "Then, set these options in /etc/slurm/slurm.conf:"
- elog " ProctrackType=proctrack/cgroup"
- elog " TaskPlugin=task/cgroup"
- einfo
- ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
- for folder_path in ${paths[@]}; do
- ewarn " ${folder_path}"
- done
-}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2020-12-01 12:13 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2020-12-01 12:13 UTC (permalink / raw
To: gentoo-commits
commit: 06bdd71742105d3f8691ed43f54accc70bf9af6f
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Tue Dec 1 12:13:10 2020 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Tue Dec 1 12:13:20 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=06bdd717
sys-cluster/slurm: Version bump (v20.11.0.1)
Package-Manager: Portage-3.0.8, Repoman-3.0.2
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/Manifest | 1 +
sys-cluster/slurm/slurm-20.11.0.1.ebuild | 261 +++++++++++++++++++++++++++++++
2 files changed, 262 insertions(+)
diff --git a/sys-cluster/slurm/Manifest b/sys-cluster/slurm/Manifest
index 719a485c8a9..882131982a9 100644
--- a/sys-cluster/slurm/Manifest
+++ b/sys-cluster/slurm/Manifest
@@ -1,2 +1,3 @@
DIST slurm-20-02-4-1.tar.gz 8689917 BLAKE2B 69d78b7f82065f7ca1c869c0648012cc23e746c81b1a76d612d96fe2c6c66cc2fc1727a1e164a0f6d338b568c45bb1ac78b815181325a3982957683b77ae60d5 SHA512 932989a3c03468783d244d9925472fb9bb4dd0007a91dccc37a3b12763ed81902ad0dc039b8527526bde58f7540d056727df4cdab7581182b028f67e597fb7d5
DIST slurm-20-02-5-1.tar.gz 8690263 BLAKE2B dd05ea11cd59385135d8988b6490d3aea6aed9e487afb8e920fc5104408fb8b440c8e8af85732f888841d5d7f9a09e95e3df7cb91b5d0fa855ff9b2127265263 SHA512 3eaeee276453ab9aea4f0eb921e8172a912b86d59a93756fc0b83a8c08eeda04c9f3cf64a33d2eab0b8e8daefb19c0e0bfcb895a5aefb327eaf18ed4e216161d
+DIST slurm-20-11-0-1.tar.gz 8762691 BLAKE2B 1e24a04b3faf97f4df98bd982d67d47f79670b863f466326e45e00fac0b99124122e94e30054a97471e4337234cbd213806791bdd5b3bddfeb05bef55f42931e SHA512 9a57f2610f7294ba6cd265746b874e32a7930100f30c0adf41d95b261787c441bdcacaa641f0b9785150b94fc7d6b5b7608ec618f668bffcae6f774752f17678
diff --git a/sys-cluster/slurm/slurm-20.11.0.1.ebuild b/sys-cluster/slurm/slurm-20.11.0.1.ebuild
new file mode 100644
index 00000000000..e74fe466f7e
--- /dev/null
+++ b/sys-cluster/slurm/slurm-20.11.0.1.ebuild
@@ -0,0 +1,261 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+if [[ ${PV} == *9999* ]]; then
+ EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
+ INHERIT_GIT="git-r3"
+ MY_P="${P}"
+else
+ if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
+ MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
+ else
+ MY_PV=$(ver_rs 1-4 '-') # stable releases
+ fi
+ MY_P="${PN}-${MY_PV}"
+ INHERIT_GIT=""
+ SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
+ KEYWORDS="~amd64 ~x86"
+fi
+
+inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
+
+DESCRIPTION="A Highly Scalable Resource Manager"
+HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
+
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
+
+COMMON_DEPEND="
+ !sys-cluster/torque
+ !net-analyzer/slurm
+ !net-analyzer/sinfo
+ || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
+ mysql? (
+ || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
+ slurmdbd? ( || ( dev-db/mariadb:* dev-db/mysql:* ) )
+ )
+ munge? ( sys-auth/munge )
+ pam? ( sys-libs/pam )
+ lua? ( dev-lang/lua:0= )
+ !lua? ( !dev-lang/lua )
+ ipmi? ( sys-libs/freeipmi )
+ json? ( dev-libs/json-c:= )
+ amd64? ( netloc? ( || ( sys-apps/netloc >=sys-apps/hwloc-2.1.0[netloc] ) ) )
+ hdf5? ( sci-libs/hdf5:= )
+ numa? ( sys-process/numactl )
+ ofed? ( sys-fabric/ofed )
+ ucx? ( sys-cluster/ucx )
+ X? ( net-libs/libssh2 )
+ >=sys-apps/hwloc-1.1.1-r1
+ sys-libs/ncurses:0=
+ app-arch/lz4:0=
+ sys-libs/readline:0="
+
+DEPEND="${COMMON_DEPEND}
+ html? ( sys-apps/man2html )"
+
+RDEPEND="${COMMON_DEPEND}
+ acct-user/slurm
+ acct-group/slurm
+ dev-libs/libcgroup"
+
+REQUIRED_USE="torque? ( perl )"
+
+S="${WORKDIR}/${PN}-${MY_P}"
+
+LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
+LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
+
+RESTRICT="test"
+
+src_unpack() {
+ if [[ ${PV} == *9999* ]]; then
+ git-r3_src_unpack
+ else
+ default
+ fi
+}
+
+src_prepare() {
+ tc-ld-disable-gold
+ default
+
+ # pids should go to /var/run/slurm
+ sed \
+ -e 's:/tmp:/var/tmp:g' \
+ -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
+ -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
+ -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
+ -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
+ -i "${S}/etc/slurm.conf.example" \
+ || die "Can't sed for /var/run/slurmctld.pid"
+ sed \
+ -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
+ -i "${S}/etc/slurmdbd.conf.example" \
+ || die "Can't sed for /var/run/slurmdbd.pid"
+ # gentooify systemd services
+ sed \
+ -e 's:sysconfig/.*:conf.d/slurm:g' \
+ -e 's:var/run/:run/slurm/:g' \
+ -e '/^EnvironmentFile=.*/d' \
+ -i "${S}/etc"/*.service.in \
+ || die "Can't sed systemd services for sysconfig or var/run/"
+
+ sed -e '/AM_PATH_GTK_2_0/d' -i configure.ac || die
+
+ hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
+ eautoreconf
+}
+
+src_configure() {
+ local myconf=(
+ --sysconfdir="${EPREFIX}/etc/${PN}"
+ --with-hwloc="${EPREFIX}/usr"
+ --htmldir="${EPREFIX}/usr/share/doc/${PF}"
+ )
+ use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
+ use mysql || myconf+=( --without-mysql_config )
+ use amd64 && myconf+=( $(use_with netloc) )
+ econf "${myconf[@]}" \
+ $(use_enable debug) \
+ $(use_enable pam) \
+ $(use_enable X x11) \
+ $(use_with munge) \
+ $(use_with json) \
+ $(use_with hdf5) \
+ $(use_with ofed) \
+ $(use_with ucx) \
+ $(use_enable static-libs static) \
+ $(use_enable multiple-slurmd)
+
+ # --htmldir does not seems to propagate... Documentations are installed
+ # in /usr/share/doc/slurm-2.3.0/html
+ # instead of /usr/share/doc/slurm-2.3.0.2/html
+ sed \
+ -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
+ -i doc/html/Makefile || die
+ if use perl ; then
+ # small hack to make it compile
+ mkdir -p "${S}/src/api/.libs" || die
+ mkdir -p "${S}/src/db_api/.libs" || die
+ touch "${S}/src/api/.libs/libslurm.so" || die
+ touch "${S}/src/db_api/.libs/libslurmdb.so" || die
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${S}" || die
+ rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
+ fi
+}
+
+src_compile() {
+ default
+ use pam && emake -C contribs/pam
+ if use perl ; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_compile
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
+ cd "${S}" || die
+ fi
+ use torque && emake -C contribs/torque
+}
+
+src_install() {
+ default
+ use pam && emake DESTDIR="${D}" -C contribs/pam install
+ if use perl; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_install
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_install
+ cd "${S}" || die
+ fi
+ if use torque; then
+ emake DESTDIR="${D}" -C contribs/torque
+ rm -f "${D}"/usr/bin/mpiexec || die
+ fi
+ use static-libs || find "${ED}" -name '*.la' -exec rm {} +
+ # install sample configs
+ keepdir /etc/slurm
+ insinto /etc/slurm
+ doins \
+ etc/prolog.example \
+ etc/cgroup.conf.example \
+ etc/slurm.conf.example \
+ etc/slurmdbd.conf.example
+ exeinto /etc/slurm
+ keepdir /etc/slurm/layouts.d
+ # install init.d files
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
+ # install conf.d files
+ newconfd "${FILESDIR}/slurm.confd" slurm
+ # install logrotate file
+ insinto /etc/logrotate.d
+ newins "${FILESDIR}/logrotate" slurm
+ # install bashcomp
+ newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
+ bashcomp_alias scontrol \
+ sreport sacctmgr squeue scancel sshare sbcast sinfo \
+ sprio sacct salloc sbatch srun sattach sdiag sstat
+ # install systemd files
+ systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
+ systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
+}
+
+pkg_preinst() {
+ if use munge; then
+ sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
+ fi
+}
+
+create_folders_and_fix_permissions() {
+ einfo "Fixing permissions in ${@}"
+ mkdir -p ${@} || die
+ chown -R ${PN}:${PN} ${@} || die
+}
+
+pkg_postinst() {
+ paths=(
+ "${EROOT}"/var/${PN}/checkpoint
+ "${EROOT}"/var/${PN}
+ "${EROOT}"/var/spool/${PN}/slurmd
+ "${EROOT}"/var/spool/${PN}
+ "${EROOT}"/var/log/${PN}
+ /var/tmp/${PN}/${PN}d
+ /var/tmp/${PN}
+ /run/${PN}
+ )
+ local folder_path
+ for folder_path in ${paths[@]}; do
+ create_folders_and_fix_permissions $folder_path
+ done
+ echo
+
+ elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
+ elog "through a (javascript enabled) browser to create a configureation file."
+ elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
+ echo
+ elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
+ elog "Your kernel must be compiled with the wanted cgroup feature:"
+ elog " For the proctrack plugin:"
+ elog " freezer"
+ elog " For the task plugin:"
+ elog " cpuset, memory, devices"
+ elog " For the accounting plugin:"
+ elog " cpuacct, memory, blkio"
+ elog "Then, set these options in /etc/slurm/slurm.conf:"
+ elog " ProctrackType=proctrack/cgroup"
+ elog " TaskPlugin=task/cgroup"
+ einfo
+ ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
+ for folder_path in ${paths[@]}; do
+ ewarn " ${folder_path}"
+ done
+}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2020-09-20 13:07 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2020-09-20 13:07 UTC (permalink / raw
To: gentoo-commits
commit: de36ed78552c9da321e211987ad258788c2f93cd
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sun Sep 20 13:06:49 2020 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sun Sep 20 13:07:42 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=de36ed78
sys-cluster/slurm: Version bump (v20.02.5)
Package-Manager: Portage-3.0.4, Repoman-3.0.1
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/Manifest | 1 +
sys-cluster/slurm/slurm-20.02.5.1.ebuild | 265 +++++++++++++++++++++++++++++++
2 files changed, 266 insertions(+)
diff --git a/sys-cluster/slurm/Manifest b/sys-cluster/slurm/Manifest
index 91eb297ef62..2b0e16b8b3d 100644
--- a/sys-cluster/slurm/Manifest
+++ b/sys-cluster/slurm/Manifest
@@ -1,2 +1,3 @@
DIST slurm-20-02-3-1.tar.gz 8686608 BLAKE2B bbb1776c6c39ea81d636f0bf8f8534c508c1842e93d5bd70e49f8b63cf78b9d7be46f6cf2855517ebaaf294d00048f65b17dba91f2316ab0706342f68f7c2c3a SHA512 4c9f847b18052f9373694f91346eb8e0532c3a71060e5b8e4fd837534014ad5813adb93d2b60f7047e355f57919f2bef59b10c6540e13576aaa47ee0ba2b5a22
DIST slurm-20-02-4-1.tar.gz 8689917 BLAKE2B 69d78b7f82065f7ca1c869c0648012cc23e746c81b1a76d612d96fe2c6c66cc2fc1727a1e164a0f6d338b568c45bb1ac78b815181325a3982957683b77ae60d5 SHA512 932989a3c03468783d244d9925472fb9bb4dd0007a91dccc37a3b12763ed81902ad0dc039b8527526bde58f7540d056727df4cdab7581182b028f67e597fb7d5
+DIST slurm-20-02-5-1.tar.gz 8690263 BLAKE2B dd05ea11cd59385135d8988b6490d3aea6aed9e487afb8e920fc5104408fb8b440c8e8af85732f888841d5d7f9a09e95e3df7cb91b5d0fa855ff9b2127265263 SHA512 3eaeee276453ab9aea4f0eb921e8172a912b86d59a93756fc0b83a8c08eeda04c9f3cf64a33d2eab0b8e8daefb19c0e0bfcb895a5aefb327eaf18ed4e216161d
diff --git a/sys-cluster/slurm/slurm-20.02.5.1.ebuild b/sys-cluster/slurm/slurm-20.02.5.1.ebuild
new file mode 100644
index 00000000000..74a772b3b66
--- /dev/null
+++ b/sys-cluster/slurm/slurm-20.02.5.1.ebuild
@@ -0,0 +1,265 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+if [[ ${PV} == *9999* ]]; then
+ EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
+ INHERIT_GIT="git-r3"
+ MY_P="${P}"
+else
+ if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
+ MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
+ else
+ MY_PV=$(ver_rs 1-4 '-') # stable releases
+ fi
+ MY_P="${PN}-${MY_PV}"
+ INHERIT_GIT=""
+ SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
+ KEYWORDS="~amd64 ~x86"
+fi
+
+inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
+
+DESCRIPTION="A Highly Scalable Resource Manager"
+HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
+
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
+
+COMMON_DEPEND="
+ !sys-cluster/torque
+ !net-analyzer/slurm
+ !net-analyzer/sinfo
+ || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
+ mysql? (
+ || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
+ slurmdbd? ( || ( dev-db/mariadb:* dev-db/mysql:* ) )
+ )
+ munge? ( sys-auth/munge )
+ pam? ( sys-libs/pam )
+ lua? ( dev-lang/lua:0= )
+ !lua? ( !dev-lang/lua )
+ ipmi? ( sys-libs/freeipmi )
+ json? ( dev-libs/json-c:= )
+ amd64? ( netloc? ( || ( sys-apps/netloc >=sys-apps/hwloc-2.1.0[netloc] ) ) )
+ hdf5? ( sci-libs/hdf5:= )
+ numa? ( sys-process/numactl )
+ ofed? ( sys-fabric/ofed )
+ ucx? ( sys-cluster/ucx )
+ X? ( net-libs/libssh2 )
+ >=sys-apps/hwloc-1.1.1-r1
+ sys-libs/ncurses:0=
+ app-arch/lz4:0=
+ sys-libs/readline:0="
+
+DEPEND="${COMMON_DEPEND}
+ html? ( sys-apps/man2html )"
+
+RDEPEND="${COMMON_DEPEND}
+ acct-user/slurm
+ acct-group/slurm
+ dev-libs/libcgroup"
+
+REQUIRED_USE="torque? ( perl )"
+
+S="${WORKDIR}/${PN}-${MY_P}"
+
+LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
+LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
+
+RESTRICT="test"
+
+src_unpack() {
+ if [[ ${PV} == *9999* ]]; then
+ git-r3_src_unpack
+ else
+ default
+ fi
+}
+
+src_prepare() {
+ tc-ld-disable-gold
+ default
+
+ # pids should go to /var/run/slurm
+ sed \
+ -e 's:/tmp:/var/tmp:g' \
+ -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
+ -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
+ -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
+ -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
+ -i "${S}/etc/slurm.conf.example" \
+ || die "Can't sed for /var/run/slurmctld.pid"
+ sed \
+ -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
+ -i "${S}/etc/slurmdbd.conf.example" \
+ || die "Can't sed for /var/run/slurmdbd.pid"
+ # gentooify systemd services
+ sed \
+ -e 's:sysconfig/.*:conf.d/slurm:g' \
+ -e 's:var/run/:run/slurm/:g' \
+ -e '/^EnvironmentFile=.*/d' \
+ -i "${S}/etc"/*.service.in \
+ || die "Can't sed systemd services for sysconfig or var/run/"
+
+ sed -e '/AM_PATH_GTK_2_0/d' -i configure.ac || die
+
+ hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
+ eautoreconf
+}
+
+src_configure() {
+ local myconf=(
+ --sysconfdir="${EPREFIX}/etc/${PN}"
+ --with-hwloc="${EPREFIX}/usr"
+ --htmldir="${EPREFIX}/usr/share/doc/${PF}"
+ )
+ use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
+ use mysql || myconf+=( --without-mysql_config )
+ use amd64 && myconf+=( $(use_with netloc) )
+ econf "${myconf[@]}" \
+ $(use_enable debug) \
+ $(use_enable pam) \
+ $(use_enable X x11) \
+ $(use_with munge) \
+ $(use_with json) \
+ $(use_with hdf5) \
+ $(use_with ofed) \
+ $(use_with ucx) \
+ $(use_enable static-libs static) \
+ $(use_enable multiple-slurmd)
+
+ # --htmldir does not seems to propagate... Documentations are installed
+ # in /usr/share/doc/slurm-2.3.0/html
+ # instead of /usr/share/doc/slurm-2.3.0.2/html
+ sed \
+ -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
+ -i doc/html/Makefile || die
+ if use perl ; then
+ # small hack to make it compile
+ mkdir -p "${S}/src/api/.libs" || die
+ mkdir -p "${S}/src/db_api/.libs" || die
+ touch "${S}/src/api/.libs/libslurm.so" || die
+ touch "${S}/src/db_api/.libs/libslurmdb.so" || die
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${S}" || die
+ rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
+ fi
+}
+
+src_compile() {
+ default
+ use pam && emake -C contribs/pam
+ if use perl ; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_compile
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
+ cd "${S}" || die
+ fi
+ use torque && emake -C contribs/torque
+}
+
+src_install() {
+ default
+ use pam && emake DESTDIR="${D}" -C contribs/pam install
+ if use perl; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_install
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_install
+ cd "${S}" || die
+ fi
+ if use torque; then
+ emake DESTDIR="${D}" -C contribs/torque
+ rm -f "${D}"/usr/bin/mpiexec || die
+ fi
+ use static-libs || find "${ED}" -name '*.la' -exec rm {} +
+ # install sample configs
+ keepdir /etc/slurm
+ insinto /etc/slurm
+ doins \
+ etc/prolog.example \
+ etc/cgroup.conf.example \
+ etc/slurm.conf.example \
+ etc/slurmdbd.conf.example
+ exeinto /etc/slurm
+ keepdir /etc/slurm/layouts.d
+ insinto /etc/slurm/layouts.d
+ newins etc/layouts.d.power.conf.example power.conf.example
+ newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
+ newins etc/layouts.d.unit.conf.example unit.conf.example
+ # install init.d files
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
+ # install conf.d files
+ newconfd "${FILESDIR}/slurm.confd" slurm
+ # install logrotate file
+ insinto /etc/logrotate.d
+ newins "${FILESDIR}/logrotate" slurm
+ # install bashcomp
+ newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
+ bashcomp_alias scontrol \
+ sreport sacctmgr squeue scancel sshare sbcast sinfo \
+ sprio sacct salloc sbatch srun sattach sdiag sstat
+ # install systemd files
+ systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
+ systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
+}
+
+pkg_preinst() {
+ if use munge; then
+ sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
+ fi
+}
+
+create_folders_and_fix_permissions() {
+ einfo "Fixing permissions in ${@}"
+ mkdir -p ${@} || die
+ chown -R ${PN}:${PN} ${@} || die
+}
+
+pkg_postinst() {
+ paths=(
+ "${EROOT}"/var/${PN}/checkpoint
+ "${EROOT}"/var/${PN}
+ "${EROOT}"/var/spool/${PN}/slurmd
+ "${EROOT}"/var/spool/${PN}
+ "${EROOT}"/var/log/${PN}
+ /var/tmp/${PN}/${PN}d
+ /var/tmp/${PN}
+ /run/${PN}
+ )
+ local folder_path
+ for folder_path in ${paths[@]}; do
+ create_folders_and_fix_permissions $folder_path
+ done
+ echo
+
+ elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
+ elog "through a (javascript enabled) browser to create a configureation file."
+ elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
+ echo
+ elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
+ elog "Your kernel must be compiled with the wanted cgroup feature:"
+ elog " For the proctrack plugin:"
+ elog " freezer"
+ elog " For the task plugin:"
+ elog " cpuset, memory, devices"
+ elog " For the accounting plugin:"
+ elog " cpuacct, memory, blkio"
+ elog "Then, set these options in /etc/slurm/slurm.conf:"
+ elog " ProctrackType=proctrack/cgroup"
+ elog " TaskPlugin=task/cgroup"
+ einfo
+ ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
+ for folder_path in ${paths[@]}; do
+ ewarn " ${folder_path}"
+ done
+}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2020-09-20 13:07 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2020-09-20 13:07 UTC (permalink / raw
To: gentoo-commits
commit: 9c321f8fee724ddb9f9116f4315286e4158ccdc1
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sun Sep 20 13:07:31 2020 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sun Sep 20 13:07:43 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=9c321f8f
sys-cluster/slurm: Drop old
Package-Manager: Portage-3.0.4, Repoman-3.0.1
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/Manifest | 1 -
sys-cluster/slurm/slurm-20.02.3.1.ebuild | 265 -------------------------------
2 files changed, 266 deletions(-)
diff --git a/sys-cluster/slurm/Manifest b/sys-cluster/slurm/Manifest
index 2b0e16b8b3d..719a485c8a9 100644
--- a/sys-cluster/slurm/Manifest
+++ b/sys-cluster/slurm/Manifest
@@ -1,3 +1,2 @@
-DIST slurm-20-02-3-1.tar.gz 8686608 BLAKE2B bbb1776c6c39ea81d636f0bf8f8534c508c1842e93d5bd70e49f8b63cf78b9d7be46f6cf2855517ebaaf294d00048f65b17dba91f2316ab0706342f68f7c2c3a SHA512 4c9f847b18052f9373694f91346eb8e0532c3a71060e5b8e4fd837534014ad5813adb93d2b60f7047e355f57919f2bef59b10c6540e13576aaa47ee0ba2b5a22
DIST slurm-20-02-4-1.tar.gz 8689917 BLAKE2B 69d78b7f82065f7ca1c869c0648012cc23e746c81b1a76d612d96fe2c6c66cc2fc1727a1e164a0f6d338b568c45bb1ac78b815181325a3982957683b77ae60d5 SHA512 932989a3c03468783d244d9925472fb9bb4dd0007a91dccc37a3b12763ed81902ad0dc039b8527526bde58f7540d056727df4cdab7581182b028f67e597fb7d5
DIST slurm-20-02-5-1.tar.gz 8690263 BLAKE2B dd05ea11cd59385135d8988b6490d3aea6aed9e487afb8e920fc5104408fb8b440c8e8af85732f888841d5d7f9a09e95e3df7cb91b5d0fa855ff9b2127265263 SHA512 3eaeee276453ab9aea4f0eb921e8172a912b86d59a93756fc0b83a8c08eeda04c9f3cf64a33d2eab0b8e8daefb19c0e0bfcb895a5aefb327eaf18ed4e216161d
diff --git a/sys-cluster/slurm/slurm-20.02.3.1.ebuild b/sys-cluster/slurm/slurm-20.02.3.1.ebuild
deleted file mode 100644
index 74a772b3b66..00000000000
--- a/sys-cluster/slurm/slurm-20.02.3.1.ebuild
+++ /dev/null
@@ -1,265 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-if [[ ${PV} == *9999* ]]; then
- EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
- INHERIT_GIT="git-r3"
- MY_P="${P}"
-else
- if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
- MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
- else
- MY_PV=$(ver_rs 1-4 '-') # stable releases
- fi
- MY_P="${PN}-${MY_PV}"
- INHERIT_GIT=""
- SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
- KEYWORDS="~amd64 ~x86"
-fi
-
-inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
-
-DESCRIPTION="A Highly Scalable Resource Manager"
-HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
-
-LICENSE="GPL-2"
-SLOT="0"
-IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
-
-COMMON_DEPEND="
- !sys-cluster/torque
- !net-analyzer/slurm
- !net-analyzer/sinfo
- || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
- mysql? (
- || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
- slurmdbd? ( || ( dev-db/mariadb:* dev-db/mysql:* ) )
- )
- munge? ( sys-auth/munge )
- pam? ( sys-libs/pam )
- lua? ( dev-lang/lua:0= )
- !lua? ( !dev-lang/lua )
- ipmi? ( sys-libs/freeipmi )
- json? ( dev-libs/json-c:= )
- amd64? ( netloc? ( || ( sys-apps/netloc >=sys-apps/hwloc-2.1.0[netloc] ) ) )
- hdf5? ( sci-libs/hdf5:= )
- numa? ( sys-process/numactl )
- ofed? ( sys-fabric/ofed )
- ucx? ( sys-cluster/ucx )
- X? ( net-libs/libssh2 )
- >=sys-apps/hwloc-1.1.1-r1
- sys-libs/ncurses:0=
- app-arch/lz4:0=
- sys-libs/readline:0="
-
-DEPEND="${COMMON_DEPEND}
- html? ( sys-apps/man2html )"
-
-RDEPEND="${COMMON_DEPEND}
- acct-user/slurm
- acct-group/slurm
- dev-libs/libcgroup"
-
-REQUIRED_USE="torque? ( perl )"
-
-S="${WORKDIR}/${PN}-${MY_P}"
-
-LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
-LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
-
-RESTRICT="test"
-
-src_unpack() {
- if [[ ${PV} == *9999* ]]; then
- git-r3_src_unpack
- else
- default
- fi
-}
-
-src_prepare() {
- tc-ld-disable-gold
- default
-
- # pids should go to /var/run/slurm
- sed \
- -e 's:/tmp:/var/tmp:g' \
- -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
- -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
- -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
- -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
- -i "${S}/etc/slurm.conf.example" \
- || die "Can't sed for /var/run/slurmctld.pid"
- sed \
- -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
- -i "${S}/etc/slurmdbd.conf.example" \
- || die "Can't sed for /var/run/slurmdbd.pid"
- # gentooify systemd services
- sed \
- -e 's:sysconfig/.*:conf.d/slurm:g' \
- -e 's:var/run/:run/slurm/:g' \
- -e '/^EnvironmentFile=.*/d' \
- -i "${S}/etc"/*.service.in \
- || die "Can't sed systemd services for sysconfig or var/run/"
-
- sed -e '/AM_PATH_GTK_2_0/d' -i configure.ac || die
-
- hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
- eautoreconf
-}
-
-src_configure() {
- local myconf=(
- --sysconfdir="${EPREFIX}/etc/${PN}"
- --with-hwloc="${EPREFIX}/usr"
- --htmldir="${EPREFIX}/usr/share/doc/${PF}"
- )
- use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
- use mysql || myconf+=( --without-mysql_config )
- use amd64 && myconf+=( $(use_with netloc) )
- econf "${myconf[@]}" \
- $(use_enable debug) \
- $(use_enable pam) \
- $(use_enable X x11) \
- $(use_with munge) \
- $(use_with json) \
- $(use_with hdf5) \
- $(use_with ofed) \
- $(use_with ucx) \
- $(use_enable static-libs static) \
- $(use_enable multiple-slurmd)
-
- # --htmldir does not seems to propagate... Documentations are installed
- # in /usr/share/doc/slurm-2.3.0/html
- # instead of /usr/share/doc/slurm-2.3.0.2/html
- sed \
- -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
- -i doc/html/Makefile || die
- if use perl ; then
- # small hack to make it compile
- mkdir -p "${S}/src/api/.libs" || die
- mkdir -p "${S}/src/db_api/.libs" || die
- touch "${S}/src/api/.libs/libslurm.so" || die
- touch "${S}/src/db_api/.libs/libslurmdb.so" || die
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${S}" || die
- rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
- fi
-}
-
-src_compile() {
- default
- use pam && emake -C contribs/pam
- if use perl ; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_compile
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
- cd "${S}" || die
- fi
- use torque && emake -C contribs/torque
-}
-
-src_install() {
- default
- use pam && emake DESTDIR="${D}" -C contribs/pam install
- if use perl; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_install
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_install
- cd "${S}" || die
- fi
- if use torque; then
- emake DESTDIR="${D}" -C contribs/torque
- rm -f "${D}"/usr/bin/mpiexec || die
- fi
- use static-libs || find "${ED}" -name '*.la' -exec rm {} +
- # install sample configs
- keepdir /etc/slurm
- insinto /etc/slurm
- doins \
- etc/prolog.example \
- etc/cgroup.conf.example \
- etc/slurm.conf.example \
- etc/slurmdbd.conf.example
- exeinto /etc/slurm
- keepdir /etc/slurm/layouts.d
- insinto /etc/slurm/layouts.d
- newins etc/layouts.d.power.conf.example power.conf.example
- newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
- newins etc/layouts.d.unit.conf.example unit.conf.example
- # install init.d files
- newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
- newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
- newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
- # install conf.d files
- newconfd "${FILESDIR}/slurm.confd" slurm
- # install logrotate file
- insinto /etc/logrotate.d
- newins "${FILESDIR}/logrotate" slurm
- # install bashcomp
- newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
- bashcomp_alias scontrol \
- sreport sacctmgr squeue scancel sshare sbcast sinfo \
- sprio sacct salloc sbatch srun sattach sdiag sstat
- # install systemd files
- systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
- systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
-}
-
-pkg_preinst() {
- if use munge; then
- sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
- fi
-}
-
-create_folders_and_fix_permissions() {
- einfo "Fixing permissions in ${@}"
- mkdir -p ${@} || die
- chown -R ${PN}:${PN} ${@} || die
-}
-
-pkg_postinst() {
- paths=(
- "${EROOT}"/var/${PN}/checkpoint
- "${EROOT}"/var/${PN}
- "${EROOT}"/var/spool/${PN}/slurmd
- "${EROOT}"/var/spool/${PN}
- "${EROOT}"/var/log/${PN}
- /var/tmp/${PN}/${PN}d
- /var/tmp/${PN}
- /run/${PN}
- )
- local folder_path
- for folder_path in ${paths[@]}; do
- create_folders_and_fix_permissions $folder_path
- done
- echo
-
- elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
- elog "through a (javascript enabled) browser to create a configureation file."
- elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
- echo
- elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
- elog "Your kernel must be compiled with the wanted cgroup feature:"
- elog " For the proctrack plugin:"
- elog " freezer"
- elog " For the task plugin:"
- elog " cpuset, memory, devices"
- elog " For the accounting plugin:"
- elog " cpuacct, memory, blkio"
- elog "Then, set these options in /etc/slurm/slurm.conf:"
- elog " ProctrackType=proctrack/cgroup"
- elog " TaskPlugin=task/cgroup"
- einfo
- ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
- for folder_path in ${paths[@]}; do
- ewarn " ${folder_path}"
- done
-}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2020-08-29 10:10 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2020-08-29 10:10 UTC (permalink / raw
To: gentoo-commits
commit: 25138402504cd659cd4ef66696546eb4fdf77af4
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sat Aug 29 10:09:56 2020 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sat Aug 29 10:10:05 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=25138402
sys-cluster/slurm: Version bump (v20.02.4.1)
Package-Manager: Portage-2.3.103, Repoman-2.3.23
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/Manifest | 1 +
sys-cluster/slurm/slurm-20.02.4.1.ebuild | 265 +++++++++++++++++++++++++++++++
2 files changed, 266 insertions(+)
diff --git a/sys-cluster/slurm/Manifest b/sys-cluster/slurm/Manifest
index 35918cfdb8f..91eb297ef62 100644
--- a/sys-cluster/slurm/Manifest
+++ b/sys-cluster/slurm/Manifest
@@ -1 +1,2 @@
DIST slurm-20-02-3-1.tar.gz 8686608 BLAKE2B bbb1776c6c39ea81d636f0bf8f8534c508c1842e93d5bd70e49f8b63cf78b9d7be46f6cf2855517ebaaf294d00048f65b17dba91f2316ab0706342f68f7c2c3a SHA512 4c9f847b18052f9373694f91346eb8e0532c3a71060e5b8e4fd837534014ad5813adb93d2b60f7047e355f57919f2bef59b10c6540e13576aaa47ee0ba2b5a22
+DIST slurm-20-02-4-1.tar.gz 8689917 BLAKE2B 69d78b7f82065f7ca1c869c0648012cc23e746c81b1a76d612d96fe2c6c66cc2fc1727a1e164a0f6d338b568c45bb1ac78b815181325a3982957683b77ae60d5 SHA512 932989a3c03468783d244d9925472fb9bb4dd0007a91dccc37a3b12763ed81902ad0dc039b8527526bde58f7540d056727df4cdab7581182b028f67e597fb7d5
diff --git a/sys-cluster/slurm/slurm-20.02.4.1.ebuild b/sys-cluster/slurm/slurm-20.02.4.1.ebuild
new file mode 100644
index 00000000000..74a772b3b66
--- /dev/null
+++ b/sys-cluster/slurm/slurm-20.02.4.1.ebuild
@@ -0,0 +1,265 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+if [[ ${PV} == *9999* ]]; then
+ EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
+ INHERIT_GIT="git-r3"
+ MY_P="${P}"
+else
+ if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
+ MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
+ else
+ MY_PV=$(ver_rs 1-4 '-') # stable releases
+ fi
+ MY_P="${PN}-${MY_PV}"
+ INHERIT_GIT=""
+ SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
+ KEYWORDS="~amd64 ~x86"
+fi
+
+inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
+
+DESCRIPTION="A Highly Scalable Resource Manager"
+HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
+
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
+
+COMMON_DEPEND="
+ !sys-cluster/torque
+ !net-analyzer/slurm
+ !net-analyzer/sinfo
+ || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
+ mysql? (
+ || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
+ slurmdbd? ( || ( dev-db/mariadb:* dev-db/mysql:* ) )
+ )
+ munge? ( sys-auth/munge )
+ pam? ( sys-libs/pam )
+ lua? ( dev-lang/lua:0= )
+ !lua? ( !dev-lang/lua )
+ ipmi? ( sys-libs/freeipmi )
+ json? ( dev-libs/json-c:= )
+ amd64? ( netloc? ( || ( sys-apps/netloc >=sys-apps/hwloc-2.1.0[netloc] ) ) )
+ hdf5? ( sci-libs/hdf5:= )
+ numa? ( sys-process/numactl )
+ ofed? ( sys-fabric/ofed )
+ ucx? ( sys-cluster/ucx )
+ X? ( net-libs/libssh2 )
+ >=sys-apps/hwloc-1.1.1-r1
+ sys-libs/ncurses:0=
+ app-arch/lz4:0=
+ sys-libs/readline:0="
+
+DEPEND="${COMMON_DEPEND}
+ html? ( sys-apps/man2html )"
+
+RDEPEND="${COMMON_DEPEND}
+ acct-user/slurm
+ acct-group/slurm
+ dev-libs/libcgroup"
+
+REQUIRED_USE="torque? ( perl )"
+
+S="${WORKDIR}/${PN}-${MY_P}"
+
+LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
+LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
+
+RESTRICT="test"
+
+src_unpack() {
+ if [[ ${PV} == *9999* ]]; then
+ git-r3_src_unpack
+ else
+ default
+ fi
+}
+
+src_prepare() {
+ tc-ld-disable-gold
+ default
+
+ # pids should go to /var/run/slurm
+ sed \
+ -e 's:/tmp:/var/tmp:g' \
+ -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
+ -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
+ -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
+ -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
+ -i "${S}/etc/slurm.conf.example" \
+ || die "Can't sed for /var/run/slurmctld.pid"
+ sed \
+ -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
+ -i "${S}/etc/slurmdbd.conf.example" \
+ || die "Can't sed for /var/run/slurmdbd.pid"
+ # gentooify systemd services
+ sed \
+ -e 's:sysconfig/.*:conf.d/slurm:g' \
+ -e 's:var/run/:run/slurm/:g' \
+ -e '/^EnvironmentFile=.*/d' \
+ -i "${S}/etc"/*.service.in \
+ || die "Can't sed systemd services for sysconfig or var/run/"
+
+ sed -e '/AM_PATH_GTK_2_0/d' -i configure.ac || die
+
+ hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
+ eautoreconf
+}
+
+src_configure() {
+ local myconf=(
+ --sysconfdir="${EPREFIX}/etc/${PN}"
+ --with-hwloc="${EPREFIX}/usr"
+ --htmldir="${EPREFIX}/usr/share/doc/${PF}"
+ )
+ use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
+ use mysql || myconf+=( --without-mysql_config )
+ use amd64 && myconf+=( $(use_with netloc) )
+ econf "${myconf[@]}" \
+ $(use_enable debug) \
+ $(use_enable pam) \
+ $(use_enable X x11) \
+ $(use_with munge) \
+ $(use_with json) \
+ $(use_with hdf5) \
+ $(use_with ofed) \
+ $(use_with ucx) \
+ $(use_enable static-libs static) \
+ $(use_enable multiple-slurmd)
+
+ # --htmldir does not seems to propagate... Documentations are installed
+ # in /usr/share/doc/slurm-2.3.0/html
+ # instead of /usr/share/doc/slurm-2.3.0.2/html
+ sed \
+ -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
+ -i doc/html/Makefile || die
+ if use perl ; then
+ # small hack to make it compile
+ mkdir -p "${S}/src/api/.libs" || die
+ mkdir -p "${S}/src/db_api/.libs" || die
+ touch "${S}/src/api/.libs/libslurm.so" || die
+ touch "${S}/src/db_api/.libs/libslurmdb.so" || die
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${S}" || die
+ rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
+ fi
+}
+
+src_compile() {
+ default
+ use pam && emake -C contribs/pam
+ if use perl ; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_compile
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
+ cd "${S}" || die
+ fi
+ use torque && emake -C contribs/torque
+}
+
+src_install() {
+ default
+ use pam && emake DESTDIR="${D}" -C contribs/pam install
+ if use perl; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_install
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_install
+ cd "${S}" || die
+ fi
+ if use torque; then
+ emake DESTDIR="${D}" -C contribs/torque
+ rm -f "${D}"/usr/bin/mpiexec || die
+ fi
+ use static-libs || find "${ED}" -name '*.la' -exec rm {} +
+ # install sample configs
+ keepdir /etc/slurm
+ insinto /etc/slurm
+ doins \
+ etc/prolog.example \
+ etc/cgroup.conf.example \
+ etc/slurm.conf.example \
+ etc/slurmdbd.conf.example
+ exeinto /etc/slurm
+ keepdir /etc/slurm/layouts.d
+ insinto /etc/slurm/layouts.d
+ newins etc/layouts.d.power.conf.example power.conf.example
+ newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
+ newins etc/layouts.d.unit.conf.example unit.conf.example
+ # install init.d files
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
+ # install conf.d files
+ newconfd "${FILESDIR}/slurm.confd" slurm
+ # install logrotate file
+ insinto /etc/logrotate.d
+ newins "${FILESDIR}/logrotate" slurm
+ # install bashcomp
+ newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
+ bashcomp_alias scontrol \
+ sreport sacctmgr squeue scancel sshare sbcast sinfo \
+ sprio sacct salloc sbatch srun sattach sdiag sstat
+ # install systemd files
+ systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
+ systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
+}
+
+pkg_preinst() {
+ if use munge; then
+ sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
+ fi
+}
+
+create_folders_and_fix_permissions() {
+ einfo "Fixing permissions in ${@}"
+ mkdir -p ${@} || die
+ chown -R ${PN}:${PN} ${@} || die
+}
+
+pkg_postinst() {
+ paths=(
+ "${EROOT}"/var/${PN}/checkpoint
+ "${EROOT}"/var/${PN}
+ "${EROOT}"/var/spool/${PN}/slurmd
+ "${EROOT}"/var/spool/${PN}
+ "${EROOT}"/var/log/${PN}
+ /var/tmp/${PN}/${PN}d
+ /var/tmp/${PN}
+ /run/${PN}
+ )
+ local folder_path
+ for folder_path in ${paths[@]}; do
+ create_folders_and_fix_permissions $folder_path
+ done
+ echo
+
+ elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
+ elog "through a (javascript enabled) browser to create a configureation file."
+ elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
+ echo
+ elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
+ elog "Your kernel must be compiled with the wanted cgroup feature:"
+ elog " For the proctrack plugin:"
+ elog " freezer"
+ elog " For the task plugin:"
+ elog " cpuset, memory, devices"
+ elog " For the accounting plugin:"
+ elog " cpuacct, memory, blkio"
+ elog "Then, set these options in /etc/slurm/slurm.conf:"
+ elog " ProctrackType=proctrack/cgroup"
+ elog " TaskPlugin=task/cgroup"
+ einfo
+ ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
+ for folder_path in ${paths[@]}; do
+ ewarn " ${folder_path}"
+ done
+}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2020-07-26 1:53 Thomas Deutschmann
0 siblings, 0 replies; 57+ messages in thread
From: Thomas Deutschmann @ 2020-07-26 1:53 UTC (permalink / raw
To: gentoo-commits
commit: b0615d951ed8d14e00b925da22680e5fc384bd0f
Author: Thomas Deutschmann <whissi <AT> gentoo <DOT> org>
AuthorDate: Sun Jul 26 01:49:42 2020 +0000
Commit: Thomas Deutschmann <whissi <AT> gentoo <DOT> org>
CommitDate: Sun Jul 26 01:49:42 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=b0615d95
sys-cluster/slurm: fix MissingSlotDep on dev-db/{mariadb,mysql}
Package-Manager: Portage-3.0.0, Repoman-2.3.23
Signed-off-by: Thomas Deutschmann <whissi <AT> gentoo.org>
sys-cluster/slurm/slurm-20.02.3.1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-cluster/slurm/slurm-20.02.3.1.ebuild b/sys-cluster/slurm/slurm-20.02.3.1.ebuild
index 53bcab470f7..74a772b3b66 100644
--- a/sys-cluster/slurm/slurm-20.02.3.1.ebuild
+++ b/sys-cluster/slurm/slurm-20.02.3.1.ebuild
@@ -35,7 +35,7 @@ COMMON_DEPEND="
|| ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
mysql? (
|| ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
- slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
+ slurmdbd? ( || ( dev-db/mariadb:* dev-db/mysql:* ) )
)
munge? ( sys-auth/munge )
pam? ( sys-libs/pam )
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2020-06-07 10:54 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2020-06-07 10:54 UTC (permalink / raw
To: gentoo-commits
commit: 9ce4f2bd2510ff32ed4e2f88cd980fadbb8a4d28
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sun Jun 7 10:53:45 2020 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sun Jun 7 10:54:00 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=9ce4f2bd
sys-cluster/slurm: fix a typo to inherit deps
Package-Manager: Portage-2.3.99, Repoman-2.3.22
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/slurm-20.02.3.1.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-cluster/slurm/slurm-20.02.3.1.ebuild b/sys-cluster/slurm/slurm-20.02.3.1.ebuild
index 1872358a4ee..53bcab470f7 100644
--- a/sys-cluster/slurm/slurm-20.02.3.1.ebuild
+++ b/sys-cluster/slurm/slurm-20.02.3.1.ebuild
@@ -57,7 +57,7 @@ COMMON_DEPEND="
DEPEND="${COMMON_DEPEND}
html? ( sys-apps/man2html )"
-RDEPEND="${OMMON_DEPEND}
+RDEPEND="${COMMON_DEPEND}
acct-user/slurm
acct-group/slurm
dev-libs/libcgroup"
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2020-05-25 20:47 Alexey Shvetsov
0 siblings, 0 replies; 57+ messages in thread
From: Alexey Shvetsov @ 2020-05-25 20:47 UTC (permalink / raw
To: gentoo-commits
commit: 5612366a33d4ee1767f27e39b8431ffe5c76661c
Author: Alexey Shvetsov <alexxy <AT> gentoo <DOT> org>
AuthorDate: Mon May 25 20:44:16 2020 +0000
Commit: Alexey Shvetsov <alexxy <AT> gentoo <DOT> org>
CommitDate: Mon May 25 20:47:32 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=5612366a
Revert "sys-cluster/slurm: improve netloc dep, disable-static"
This reverts commit 742fa1d6fa947439c72884ebe6193627f0f7539c.
This change was partialy incorporated already
Signed-off-by: Alexey Shvetsov <alexxy <AT> gentoo.org>
sys-cluster/slurm/slurm-20.02.2.1-r1.ebuild | 267 ----------------------------
1 file changed, 267 deletions(-)
diff --git a/sys-cluster/slurm/slurm-20.02.2.1-r1.ebuild b/sys-cluster/slurm/slurm-20.02.2.1-r1.ebuild
deleted file mode 100644
index 1a37f7c41a8..00000000000
--- a/sys-cluster/slurm/slurm-20.02.2.1-r1.ebuild
+++ /dev/null
@@ -1,267 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="7"
-
-if [[ "${PV}" == *9999* ]]; then
- EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
- INHERIT_GIT="git-r3"
- MY_P="${P}"
-else
- if [[ "${PV}" == *pre* || "${PV}" == *rc* ]]; then
- MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
- else
- MY_PV=$(ver_rs 1-3 '-') # stable releases
- fi
- MY_P="${PN}-${MY_PV}"
- INHERIT_GIT=""
- SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
- KEYWORDS="~amd64 ~x86"
-fi
-
-inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
-
-DESCRIPTION="A Highly Scalable Resource Manager"
-HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
-
-LICENSE="GPL-2"
-SLOT="0"
-IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd ucx torque X"
-
-COMMON_DEPEND="
- app-arch/lz4:0=
- !net-analyzer/slurm
- !net-analyzer/sinfo
- >=sys-apps/hwloc-1.1.1-r1
- !sys-cluster/torque
- sys-libs/ncurses:0=
- sys-libs/readline:0=
-
- || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
-
- amd64? ( netloc? ( || ( >=sys-apps/hwloc-2.1.0[netloc] sys-apps/netloc ) ) )
- hdf5? ( sci-libs/hdf5:= )
- ipmi? ( sys-libs/freeipmi )
- json? ( dev-libs/json-c:= )
- lua? ( dev-lang/lua:0= )
- !lua? ( !dev-lang/lua )
- mysql? (
- || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
- slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
- )
- munge? ( sys-auth/munge )
- numa? ( sys-process/numactl )
- ofed? ( sys-fabric/ofed )
- pam? ( sys-libs/pam )
- ucx? ( sys-cluster/ucx )
- X? ( net-libs/libssh2 )
-"
-DEPEND="${COMMON_DEPEND}
- html? ( sys-apps/man2html )
-"
-RDEPEND="${COMMON_DEPEND}
- acct-user/slurm
- acct-group/slurm
- dev-libs/libcgroup
-"
-REQUIRED_USE="torque? ( perl )"
-
-S="${WORKDIR}/${PN}-${MY_P}"
-
-LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
-LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
-
-RESTRICT="test"
-
-src_unpack() {
- if [[ "${PV}" == *9999* ]]; then
- git-r3_src_unpack
- else
- default
- fi
-}
-
-src_prepare() {
- tc-ld-disable-gold
- default
-
- # pids should go to /var/run/slurm
- sed \
- -e 's:/tmp:/var/tmp:g' \
- -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
- -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
- -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
- -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
- -i "${S}/etc/slurm.conf.example" \
- || die "Can't sed for /var/run/slurmctld.pid"
- sed \
- -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
- -i "${S}/etc/slurmdbd.conf.example" \
- || die "Can't sed for /var/run/slurmdbd.pid"
- # gentooify systemd services
- sed \
- -e 's:sysconfig/.*:conf.d/slurm:g' \
- -e 's:var/run/:run/slurm/:g' \
- -e '/^EnvironmentFile=.*/d' \
- -i "${S}/etc"/*.service.in \
- || die "Can't sed systemd services for sysconfig or var/run/"
-
- sed -e '/AM_PATH_GTK_2_0/d' -i configure.ac || die
-
- hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
- eautoreconf
-}
-
-src_configure() {
- local myconf=(
- $(use_enable debug)
- $(use_enable multiple-slurmd)
- $(use_enable pam)
- $(use_enable X x11)
- $(use_with hdf5)
- $(use_with json)
- $(use_with munge)
- $(use_with ofed)
- $(use_with ucx)
- --disable-static
- --htmldir="${EPREFIX}/usr/share/doc/${PF}"
- --sysconfdir="${EPREFIX}/etc/${PN}"
- --with-hwloc="${EPREFIX}/usr"
- )
- use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
- use mysql || myconf+=( --without-mysql_config )
- use amd64 && myconf+=( $(use_with netloc) )
- econf "${myconf[@]}"
-
- # --htmldir does not seems to propagate... Documentations are installed
- # in /usr/share/doc/slurm-2.3.0/html
- # instead of /usr/share/doc/slurm-2.3.0.2/html
- sed \
- -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
- -i doc/html/Makefile || die
- if use perl ; then
- # small hack to make it compile
- mkdir -p "${S}/src/api/.libs" || die
- mkdir -p "${S}/src/db_api/.libs" || die
- touch "${S}/src/api/.libs/libslurm.so" || die
- touch "${S}/src/db_api/.libs/libslurmdb.so" || die
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${S}" || die
- rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
- fi
-}
-
-src_compile() {
- default
- use pam && emake -C contribs/pam
- if use perl ; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_compile
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
- cd "${S}" || die
- fi
- use torque && emake -C contribs/torque
-}
-
-src_install() {
- default
- use pam && emake DESTDIR="${D}" -C contribs/pam install
- if use perl; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_install
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_install
- cd "${S}" || die
- fi
- if use torque; then
- emake DESTDIR="${D}" -C contribs/torque
- rm -f "${D}"/usr/bin/mpiexec || die
- fi
- find "${ED}" -name '*.la' -exec rm {} +
- # install sample configs
- keepdir /etc/slurm
- insinto /etc/slurm
- doins \
- etc/prolog.example \
- etc/cgroup.conf.example \
- etc/slurm.conf.example \
- etc/slurmdbd.conf.example
- exeinto /etc/slurm
- keepdir /etc/slurm/layouts.d
- insinto /etc/slurm/layouts.d
- newins etc/layouts.d.power.conf.example power.conf.example
- newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
- newins etc/layouts.d.unit.conf.example unit.conf.example
- # install init.d files
- newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
- newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
- newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
- # install conf.d files
- newconfd "${FILESDIR}/slurm.confd" slurm
- # install logrotate file
- insinto /etc/logrotate.d
- newins "${FILESDIR}/logrotate" slurm
- # install bashcomp
- newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
- bashcomp_alias scontrol \
- sreport sacctmgr squeue scancel sshare sbcast sinfo \
- sprio sacct salloc sbatch srun sattach sdiag sstat
- # install systemd files
- systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
- systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
-}
-
-pkg_preinst() {
- if use munge; then
- sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
- fi
-}
-
-create_folders_and_fix_permissions() {
- einfo "Fixing permissions in ${@}"
- mkdir -p ${@} || die
- chown -R ${PN}:${PN} ${@} || die
-}
-
-pkg_postinst() {
- paths=(
- "${EROOT}/var/${PN}/checkpoint"
- "${EROOT}/var/${PN}"
- "${EROOT}/var/spool/${PN}/slurmd"
- "${EROOT}/var/spool/${PN}"
- "${EROOT}/var/log/${PN}"
- "/var/tmp/${PN}/${PN}d"
- "/var/tmp/${PN}"
- "/run/${PN}"
- )
- local folder_path
- for folder_path in ${paths[@]}; do
- create_folders_and_fix_permissions $folder_path
- done
- echo
-
- elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
- elog "through a (javascript enabled) browser to create a configureation file."
- elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
- echo
- elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
- elog "Your kernel must be compiled with the wanted cgroup feature:"
- elog " For the proctrack plugin:"
- elog " freezer"
- elog " For the task plugin:"
- elog " cpuset, memory, devices"
- elog " For the accounting plugin:"
- elog " cpuacct, memory, blkio"
- elog "Then, set these options in /etc/slurm/slurm.conf:"
- elog " ProctrackType=proctrack/cgroup"
- elog " TaskPlugin=task/cgroup"
- einfo
- ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
- for folder_path in ${paths[@]}; do
- ewarn " ${folder_path}"
- done
-}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2020-05-25 19:46 Alexey Shvetsov
0 siblings, 0 replies; 57+ messages in thread
From: Alexey Shvetsov @ 2020-05-25 19:46 UTC (permalink / raw
To: gentoo-commits
commit: 742fa1d6fa947439c72884ebe6193627f0f7539c
Author: Alessandro Barbieri <lssndrbarbieri <AT> gmail <DOT> com>
AuthorDate: Thu May 14 18:45:27 2020 +0000
Commit: Alexey Shvetsov <alexxy <AT> gentoo <DOT> org>
CommitDate: Mon May 25 19:46:27 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=742fa1d6
sys-cluster/slurm: improve netloc dep, disable-static
netloc will be provided by hwloc[netloc] from now on
changes reflect that
Package-Manager: Portage-2.3.99, Repoman-2.3.22
Signed-off-by: Alessandro Barbieri <lssndrbarbieri <AT> gmail.com>
Closes: https://github.com/gentoo/gentoo/pull/15795
Signed-off-by: Alexey Shvetsov <alexxy <AT> gentoo.org>
sys-cluster/slurm/slurm-20.02.2.1-r1.ebuild | 267 ++++++++++++++++++++++++++++
1 file changed, 267 insertions(+)
diff --git a/sys-cluster/slurm/slurm-20.02.2.1-r1.ebuild b/sys-cluster/slurm/slurm-20.02.2.1-r1.ebuild
new file mode 100644
index 00000000000..1a37f7c41a8
--- /dev/null
+++ b/sys-cluster/slurm/slurm-20.02.2.1-r1.ebuild
@@ -0,0 +1,267 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="7"
+
+if [[ "${PV}" == *9999* ]]; then
+ EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
+ INHERIT_GIT="git-r3"
+ MY_P="${P}"
+else
+ if [[ "${PV}" == *pre* || "${PV}" == *rc* ]]; then
+ MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
+ else
+ MY_PV=$(ver_rs 1-3 '-') # stable releases
+ fi
+ MY_P="${PN}-${MY_PV}"
+ INHERIT_GIT=""
+ SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
+ KEYWORDS="~amd64 ~x86"
+fi
+
+inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
+
+DESCRIPTION="A Highly Scalable Resource Manager"
+HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
+
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd ucx torque X"
+
+COMMON_DEPEND="
+ app-arch/lz4:0=
+ !net-analyzer/slurm
+ !net-analyzer/sinfo
+ >=sys-apps/hwloc-1.1.1-r1
+ !sys-cluster/torque
+ sys-libs/ncurses:0=
+ sys-libs/readline:0=
+
+ || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
+
+ amd64? ( netloc? ( || ( >=sys-apps/hwloc-2.1.0[netloc] sys-apps/netloc ) ) )
+ hdf5? ( sci-libs/hdf5:= )
+ ipmi? ( sys-libs/freeipmi )
+ json? ( dev-libs/json-c:= )
+ lua? ( dev-lang/lua:0= )
+ !lua? ( !dev-lang/lua )
+ mysql? (
+ || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
+ slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
+ )
+ munge? ( sys-auth/munge )
+ numa? ( sys-process/numactl )
+ ofed? ( sys-fabric/ofed )
+ pam? ( sys-libs/pam )
+ ucx? ( sys-cluster/ucx )
+ X? ( net-libs/libssh2 )
+"
+DEPEND="${COMMON_DEPEND}
+ html? ( sys-apps/man2html )
+"
+RDEPEND="${COMMON_DEPEND}
+ acct-user/slurm
+ acct-group/slurm
+ dev-libs/libcgroup
+"
+REQUIRED_USE="torque? ( perl )"
+
+S="${WORKDIR}/${PN}-${MY_P}"
+
+LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
+LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
+
+RESTRICT="test"
+
+src_unpack() {
+ if [[ "${PV}" == *9999* ]]; then
+ git-r3_src_unpack
+ else
+ default
+ fi
+}
+
+src_prepare() {
+ tc-ld-disable-gold
+ default
+
+ # pids should go to /var/run/slurm
+ sed \
+ -e 's:/tmp:/var/tmp:g' \
+ -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
+ -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
+ -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
+ -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
+ -i "${S}/etc/slurm.conf.example" \
+ || die "Can't sed for /var/run/slurmctld.pid"
+ sed \
+ -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
+ -i "${S}/etc/slurmdbd.conf.example" \
+ || die "Can't sed for /var/run/slurmdbd.pid"
+ # gentooify systemd services
+ sed \
+ -e 's:sysconfig/.*:conf.d/slurm:g' \
+ -e 's:var/run/:run/slurm/:g' \
+ -e '/^EnvironmentFile=.*/d' \
+ -i "${S}/etc"/*.service.in \
+ || die "Can't sed systemd services for sysconfig or var/run/"
+
+ sed -e '/AM_PATH_GTK_2_0/d' -i configure.ac || die
+
+ hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
+ eautoreconf
+}
+
+src_configure() {
+ local myconf=(
+ $(use_enable debug)
+ $(use_enable multiple-slurmd)
+ $(use_enable pam)
+ $(use_enable X x11)
+ $(use_with hdf5)
+ $(use_with json)
+ $(use_with munge)
+ $(use_with ofed)
+ $(use_with ucx)
+ --disable-static
+ --htmldir="${EPREFIX}/usr/share/doc/${PF}"
+ --sysconfdir="${EPREFIX}/etc/${PN}"
+ --with-hwloc="${EPREFIX}/usr"
+ )
+ use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
+ use mysql || myconf+=( --without-mysql_config )
+ use amd64 && myconf+=( $(use_with netloc) )
+ econf "${myconf[@]}"
+
+ # --htmldir does not seems to propagate... Documentations are installed
+ # in /usr/share/doc/slurm-2.3.0/html
+ # instead of /usr/share/doc/slurm-2.3.0.2/html
+ sed \
+ -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
+ -i doc/html/Makefile || die
+ if use perl ; then
+ # small hack to make it compile
+ mkdir -p "${S}/src/api/.libs" || die
+ mkdir -p "${S}/src/db_api/.libs" || die
+ touch "${S}/src/api/.libs/libslurm.so" || die
+ touch "${S}/src/db_api/.libs/libslurmdb.so" || die
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${S}" || die
+ rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
+ fi
+}
+
+src_compile() {
+ default
+ use pam && emake -C contribs/pam
+ if use perl ; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_compile
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
+ cd "${S}" || die
+ fi
+ use torque && emake -C contribs/torque
+}
+
+src_install() {
+ default
+ use pam && emake DESTDIR="${D}" -C contribs/pam install
+ if use perl; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_install
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_install
+ cd "${S}" || die
+ fi
+ if use torque; then
+ emake DESTDIR="${D}" -C contribs/torque
+ rm -f "${D}"/usr/bin/mpiexec || die
+ fi
+ find "${ED}" -name '*.la' -exec rm {} +
+ # install sample configs
+ keepdir /etc/slurm
+ insinto /etc/slurm
+ doins \
+ etc/prolog.example \
+ etc/cgroup.conf.example \
+ etc/slurm.conf.example \
+ etc/slurmdbd.conf.example
+ exeinto /etc/slurm
+ keepdir /etc/slurm/layouts.d
+ insinto /etc/slurm/layouts.d
+ newins etc/layouts.d.power.conf.example power.conf.example
+ newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
+ newins etc/layouts.d.unit.conf.example unit.conf.example
+ # install init.d files
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
+ # install conf.d files
+ newconfd "${FILESDIR}/slurm.confd" slurm
+ # install logrotate file
+ insinto /etc/logrotate.d
+ newins "${FILESDIR}/logrotate" slurm
+ # install bashcomp
+ newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
+ bashcomp_alias scontrol \
+ sreport sacctmgr squeue scancel sshare sbcast sinfo \
+ sprio sacct salloc sbatch srun sattach sdiag sstat
+ # install systemd files
+ systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
+ systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
+}
+
+pkg_preinst() {
+ if use munge; then
+ sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
+ fi
+}
+
+create_folders_and_fix_permissions() {
+ einfo "Fixing permissions in ${@}"
+ mkdir -p ${@} || die
+ chown -R ${PN}:${PN} ${@} || die
+}
+
+pkg_postinst() {
+ paths=(
+ "${EROOT}/var/${PN}/checkpoint"
+ "${EROOT}/var/${PN}"
+ "${EROOT}/var/spool/${PN}/slurmd"
+ "${EROOT}/var/spool/${PN}"
+ "${EROOT}/var/log/${PN}"
+ "/var/tmp/${PN}/${PN}d"
+ "/var/tmp/${PN}"
+ "/run/${PN}"
+ )
+ local folder_path
+ for folder_path in ${paths[@]}; do
+ create_folders_and_fix_permissions $folder_path
+ done
+ echo
+
+ elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
+ elog "through a (javascript enabled) browser to create a configureation file."
+ elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
+ echo
+ elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
+ elog "Your kernel must be compiled with the wanted cgroup feature:"
+ elog " For the proctrack plugin:"
+ elog " freezer"
+ elog " For the task plugin:"
+ elog " cpuset, memory, devices"
+ elog " For the accounting plugin:"
+ elog " cpuacct, memory, blkio"
+ elog "Then, set these options in /etc/slurm/slurm.conf:"
+ elog " ProctrackType=proctrack/cgroup"
+ elog " TaskPlugin=task/cgroup"
+ einfo
+ ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
+ for folder_path in ${paths[@]}; do
+ ewarn " ${folder_path}"
+ done
+}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2020-05-22 10:39 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2020-05-22 10:39 UTC (permalink / raw
To: gentoo-commits
commit: 6d359ca848d188d27a64405a2b7ddfe5672f7fdc
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Fri May 22 10:39:26 2020 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Fri May 22 10:39:26 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=6d359ca8
sys-cluster/slurm: Drop old
Package-Manager: Portage-2.3.99, Repoman-2.3.22
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/Manifest | 1 -
sys-cluster/slurm/slurm-20.02.2.1.ebuild | 263 -------------------------------
2 files changed, 264 deletions(-)
diff --git a/sys-cluster/slurm/Manifest b/sys-cluster/slurm/Manifest
index 03b6460a4c5..35918cfdb8f 100644
--- a/sys-cluster/slurm/Manifest
+++ b/sys-cluster/slurm/Manifest
@@ -1,2 +1 @@
-DIST slurm-20-02-2-1.tar.gz 8680227 BLAKE2B 9058c5161a3e087201b17484fbb8430d2af392b4abec4cfea3b6a882609bb978987a8e6aeda512b08def8010403c9f0893827632358225c15c374d15a583432f SHA512 6ed8628be442138c90f0f497846679eb2a4ea8e2c612d31c1276cc451333663bf310719a8f823dc873536343065186dc5f26871ce80340c0bdb71ab564620513
DIST slurm-20-02-3-1.tar.gz 8686608 BLAKE2B bbb1776c6c39ea81d636f0bf8f8534c508c1842e93d5bd70e49f8b63cf78b9d7be46f6cf2855517ebaaf294d00048f65b17dba91f2316ab0706342f68f7c2c3a SHA512 4c9f847b18052f9373694f91346eb8e0532c3a71060e5b8e4fd837534014ad5813adb93d2b60f7047e355f57919f2bef59b10c6540e13576aaa47ee0ba2b5a22
diff --git a/sys-cluster/slurm/slurm-20.02.2.1.ebuild b/sys-cluster/slurm/slurm-20.02.2.1.ebuild
deleted file mode 100644
index a2a4e4bd829..00000000000
--- a/sys-cluster/slurm/slurm-20.02.2.1.ebuild
+++ /dev/null
@@ -1,263 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-if [[ ${PV} == *9999* ]]; then
- EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
- INHERIT_GIT="git-r3"
- MY_P="${P}"
-else
- if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
- MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
- else
- MY_PV=$(ver_rs 1-3 '-') # stable releases
- fi
- MY_P="${PN}-${MY_PV}"
- INHERIT_GIT=""
- SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
- KEYWORDS="~amd64 ~x86"
-fi
-
-inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
-
-DESCRIPTION="A Highly Scalable Resource Manager"
-HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
-
-LICENSE="GPL-2"
-SLOT="0"
-IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
-
-COMMON_DEPEND="
- !sys-cluster/torque
- !net-analyzer/slurm
- !net-analyzer/sinfo
- || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
- mysql? (
- || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
- slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
- )
- munge? ( sys-auth/munge )
- pam? ( sys-libs/pam )
- lua? ( dev-lang/lua:0= )
- !lua? ( !dev-lang/lua )
- ipmi? ( sys-libs/freeipmi )
- json? ( dev-libs/json-c:= )
- amd64? ( netloc? ( sys-apps/netloc ) )
- hdf5? ( sci-libs/hdf5:= )
- numa? ( sys-process/numactl )
- ofed? ( sys-fabric/ofed )
- ucx? ( sys-cluster/ucx )
- X? ( net-libs/libssh2 )
- >=sys-apps/hwloc-1.1.1-r1
- sys-libs/ncurses:0=
- app-arch/lz4:0=
- sys-libs/readline:0="
-DEPEND="${COMMON_DEPEND}
- html? ( sys-apps/man2html )"
-RDEPEND="${OMMON_DEPEND}
- acct-user/slurm
- acct-group/slurm
- dev-libs/libcgroup"
-
-REQUIRED_USE="torque? ( perl )"
-
-S="${WORKDIR}/${PN}-${MY_P}"
-
-LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
-LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
-
-RESTRICT="test"
-
-src_unpack() {
- if [[ ${PV} == *9999* ]]; then
- git-r3_src_unpack
- else
- default
- fi
-}
-
-src_prepare() {
- tc-ld-disable-gold
- default
-
- # pids should go to /var/run/slurm
- sed \
- -e 's:/tmp:/var/tmp:g' \
- -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
- -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
- -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
- -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
- -i "${S}/etc/slurm.conf.example" \
- || die "Can't sed for /var/run/slurmctld.pid"
- sed \
- -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
- -i "${S}/etc/slurmdbd.conf.example" \
- || die "Can't sed for /var/run/slurmdbd.pid"
- # gentooify systemd services
- sed \
- -e 's:sysconfig/.*:conf.d/slurm:g' \
- -e 's:var/run/:run/slurm/:g' \
- -e '/^EnvironmentFile=.*/d' \
- -i "${S}/etc"/*.service.in \
- || die "Can't sed systemd services for sysconfig or var/run/"
-
- sed -e '/AM_PATH_GTK_2_0/d' -i configure.ac || die
-
- hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
- eautoreconf
-}
-
-src_configure() {
- local myconf=(
- --sysconfdir="${EPREFIX}/etc/${PN}"
- --with-hwloc="${EPREFIX}/usr"
- --htmldir="${EPREFIX}/usr/share/doc/${PF}"
- )
- use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
- use mysql || myconf+=( --without-mysql_config )
- use amd64 && myconf+=( $(use_with netloc) )
- econf "${myconf[@]}" \
- $(use_enable debug) \
- $(use_enable pam) \
- $(use_enable X x11) \
- $(use_with munge) \
- $(use_with json) \
- $(use_with hdf5) \
- $(use_with ofed) \
- $(use_with ucx) \
- $(use_enable static-libs static) \
- $(use_enable multiple-slurmd)
-
- # --htmldir does not seems to propagate... Documentations are installed
- # in /usr/share/doc/slurm-2.3.0/html
- # instead of /usr/share/doc/slurm-2.3.0.2/html
- sed \
- -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
- -i doc/html/Makefile || die
- if use perl ; then
- # small hack to make it compile
- mkdir -p "${S}/src/api/.libs" || die
- mkdir -p "${S}/src/db_api/.libs" || die
- touch "${S}/src/api/.libs/libslurm.so" || die
- touch "${S}/src/db_api/.libs/libslurmdb.so" || die
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${S}" || die
- rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
- fi
-}
-
-src_compile() {
- default
- use pam && emake -C contribs/pam
- if use perl ; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_compile
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
- cd "${S}" || die
- fi
- use torque && emake -C contribs/torque
-}
-
-src_install() {
- default
- use pam && emake DESTDIR="${D}" -C contribs/pam install
- if use perl; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_install
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_install
- cd "${S}" || die
- fi
- if use torque; then
- emake DESTDIR="${D}" -C contribs/torque
- rm -f "${D}"/usr/bin/mpiexec || die
- fi
- use static-libs || find "${ED}" -name '*.la' -exec rm {} +
- # install sample configs
- keepdir /etc/slurm
- insinto /etc/slurm
- doins \
- etc/prolog.example \
- etc/cgroup.conf.example \
- etc/slurm.conf.example \
- etc/slurmdbd.conf.example
- exeinto /etc/slurm
- keepdir /etc/slurm/layouts.d
- insinto /etc/slurm/layouts.d
- newins etc/layouts.d.power.conf.example power.conf.example
- newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
- newins etc/layouts.d.unit.conf.example unit.conf.example
- # install init.d files
- newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
- newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
- newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
- # install conf.d files
- newconfd "${FILESDIR}/slurm.confd" slurm
- # install logrotate file
- insinto /etc/logrotate.d
- newins "${FILESDIR}/logrotate" slurm
- # install bashcomp
- newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
- bashcomp_alias scontrol \
- sreport sacctmgr squeue scancel sshare sbcast sinfo \
- sprio sacct salloc sbatch srun sattach sdiag sstat
- # install systemd files
- systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
- systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
-}
-
-pkg_preinst() {
- if use munge; then
- sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
- fi
-}
-
-create_folders_and_fix_permissions() {
- einfo "Fixing permissions in ${@}"
- mkdir -p ${@} || die
- chown -R ${PN}:${PN} ${@} || die
-}
-
-pkg_postinst() {
- paths=(
- "${EROOT}"/var/${PN}/checkpoint
- "${EROOT}"/var/${PN}
- "${EROOT}"/var/spool/${PN}/slurmd
- "${EROOT}"/var/spool/${PN}
- "${EROOT}"/var/log/${PN}
- /var/tmp/${PN}/${PN}d
- /var/tmp/${PN}
- /run/${PN}
- )
- local folder_path
- for folder_path in ${paths[@]}; do
- create_folders_and_fix_permissions $folder_path
- done
- echo
-
- elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
- elog "through a (javascript enabled) browser to create a configureation file."
- elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
- echo
- elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
- elog "Your kernel must be compiled with the wanted cgroup feature:"
- elog " For the proctrack plugin:"
- elog " freezer"
- elog " For the task plugin:"
- elog " cpuset, memory, devices"
- elog " For the accounting plugin:"
- elog " cpuacct, memory, blkio"
- elog "Then, set these options in /etc/slurm/slurm.conf:"
- elog " ProctrackType=proctrack/cgroup"
- elog " TaskPlugin=task/cgroup"
- einfo
- ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
- for folder_path in ${paths[@]}; do
- ewarn " ${folder_path}"
- done
-}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2020-05-22 10:38 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2020-05-22 10:38 UTC (permalink / raw
To: gentoo-commits
commit: 28b208231f2585a9e874f84bf59646e6c4dfa0e4
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Fri May 22 10:36:46 2020 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Fri May 22 10:38:13 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=28b20823
sys-cluster/slurm: Version bump (v20.02.3.1)
Package-Manager: Portage-2.3.99, Repoman-2.3.22
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/Manifest | 1 +
sys-cluster/slurm/slurm-20.02.3.1.ebuild | 265 +++++++++++++++++++++++++++++++
2 files changed, 266 insertions(+)
diff --git a/sys-cluster/slurm/Manifest b/sys-cluster/slurm/Manifest
index fb495d39b96..03b6460a4c5 100644
--- a/sys-cluster/slurm/Manifest
+++ b/sys-cluster/slurm/Manifest
@@ -1 +1,2 @@
DIST slurm-20-02-2-1.tar.gz 8680227 BLAKE2B 9058c5161a3e087201b17484fbb8430d2af392b4abec4cfea3b6a882609bb978987a8e6aeda512b08def8010403c9f0893827632358225c15c374d15a583432f SHA512 6ed8628be442138c90f0f497846679eb2a4ea8e2c612d31c1276cc451333663bf310719a8f823dc873536343065186dc5f26871ce80340c0bdb71ab564620513
+DIST slurm-20-02-3-1.tar.gz 8686608 BLAKE2B bbb1776c6c39ea81d636f0bf8f8534c508c1842e93d5bd70e49f8b63cf78b9d7be46f6cf2855517ebaaf294d00048f65b17dba91f2316ab0706342f68f7c2c3a SHA512 4c9f847b18052f9373694f91346eb8e0532c3a71060e5b8e4fd837534014ad5813adb93d2b60f7047e355f57919f2bef59b10c6540e13576aaa47ee0ba2b5a22
diff --git a/sys-cluster/slurm/slurm-20.02.3.1.ebuild b/sys-cluster/slurm/slurm-20.02.3.1.ebuild
new file mode 100644
index 00000000000..1872358a4ee
--- /dev/null
+++ b/sys-cluster/slurm/slurm-20.02.3.1.ebuild
@@ -0,0 +1,265 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+if [[ ${PV} == *9999* ]]; then
+ EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
+ INHERIT_GIT="git-r3"
+ MY_P="${P}"
+else
+ if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
+ MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
+ else
+ MY_PV=$(ver_rs 1-4 '-') # stable releases
+ fi
+ MY_P="${PN}-${MY_PV}"
+ INHERIT_GIT=""
+ SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
+ KEYWORDS="~amd64 ~x86"
+fi
+
+inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
+
+DESCRIPTION="A Highly Scalable Resource Manager"
+HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
+
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
+
+COMMON_DEPEND="
+ !sys-cluster/torque
+ !net-analyzer/slurm
+ !net-analyzer/sinfo
+ || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
+ mysql? (
+ || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
+ slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
+ )
+ munge? ( sys-auth/munge )
+ pam? ( sys-libs/pam )
+ lua? ( dev-lang/lua:0= )
+ !lua? ( !dev-lang/lua )
+ ipmi? ( sys-libs/freeipmi )
+ json? ( dev-libs/json-c:= )
+ amd64? ( netloc? ( || ( sys-apps/netloc >=sys-apps/hwloc-2.1.0[netloc] ) ) )
+ hdf5? ( sci-libs/hdf5:= )
+ numa? ( sys-process/numactl )
+ ofed? ( sys-fabric/ofed )
+ ucx? ( sys-cluster/ucx )
+ X? ( net-libs/libssh2 )
+ >=sys-apps/hwloc-1.1.1-r1
+ sys-libs/ncurses:0=
+ app-arch/lz4:0=
+ sys-libs/readline:0="
+
+DEPEND="${COMMON_DEPEND}
+ html? ( sys-apps/man2html )"
+
+RDEPEND="${OMMON_DEPEND}
+ acct-user/slurm
+ acct-group/slurm
+ dev-libs/libcgroup"
+
+REQUIRED_USE="torque? ( perl )"
+
+S="${WORKDIR}/${PN}-${MY_P}"
+
+LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
+LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
+
+RESTRICT="test"
+
+src_unpack() {
+ if [[ ${PV} == *9999* ]]; then
+ git-r3_src_unpack
+ else
+ default
+ fi
+}
+
+src_prepare() {
+ tc-ld-disable-gold
+ default
+
+ # pids should go to /var/run/slurm
+ sed \
+ -e 's:/tmp:/var/tmp:g' \
+ -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
+ -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
+ -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
+ -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
+ -i "${S}/etc/slurm.conf.example" \
+ || die "Can't sed for /var/run/slurmctld.pid"
+ sed \
+ -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
+ -i "${S}/etc/slurmdbd.conf.example" \
+ || die "Can't sed for /var/run/slurmdbd.pid"
+ # gentooify systemd services
+ sed \
+ -e 's:sysconfig/.*:conf.d/slurm:g' \
+ -e 's:var/run/:run/slurm/:g' \
+ -e '/^EnvironmentFile=.*/d' \
+ -i "${S}/etc"/*.service.in \
+ || die "Can't sed systemd services for sysconfig or var/run/"
+
+ sed -e '/AM_PATH_GTK_2_0/d' -i configure.ac || die
+
+ hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
+ eautoreconf
+}
+
+src_configure() {
+ local myconf=(
+ --sysconfdir="${EPREFIX}/etc/${PN}"
+ --with-hwloc="${EPREFIX}/usr"
+ --htmldir="${EPREFIX}/usr/share/doc/${PF}"
+ )
+ use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
+ use mysql || myconf+=( --without-mysql_config )
+ use amd64 && myconf+=( $(use_with netloc) )
+ econf "${myconf[@]}" \
+ $(use_enable debug) \
+ $(use_enable pam) \
+ $(use_enable X x11) \
+ $(use_with munge) \
+ $(use_with json) \
+ $(use_with hdf5) \
+ $(use_with ofed) \
+ $(use_with ucx) \
+ $(use_enable static-libs static) \
+ $(use_enable multiple-slurmd)
+
+ # --htmldir does not seems to propagate... Documentations are installed
+ # in /usr/share/doc/slurm-2.3.0/html
+ # instead of /usr/share/doc/slurm-2.3.0.2/html
+ sed \
+ -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
+ -i doc/html/Makefile || die
+ if use perl ; then
+ # small hack to make it compile
+ mkdir -p "${S}/src/api/.libs" || die
+ mkdir -p "${S}/src/db_api/.libs" || die
+ touch "${S}/src/api/.libs/libslurm.so" || die
+ touch "${S}/src/db_api/.libs/libslurmdb.so" || die
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${S}" || die
+ rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
+ fi
+}
+
+src_compile() {
+ default
+ use pam && emake -C contribs/pam
+ if use perl ; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_compile
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
+ cd "${S}" || die
+ fi
+ use torque && emake -C contribs/torque
+}
+
+src_install() {
+ default
+ use pam && emake DESTDIR="${D}" -C contribs/pam install
+ if use perl; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_install
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_install
+ cd "${S}" || die
+ fi
+ if use torque; then
+ emake DESTDIR="${D}" -C contribs/torque
+ rm -f "${D}"/usr/bin/mpiexec || die
+ fi
+ use static-libs || find "${ED}" -name '*.la' -exec rm {} +
+ # install sample configs
+ keepdir /etc/slurm
+ insinto /etc/slurm
+ doins \
+ etc/prolog.example \
+ etc/cgroup.conf.example \
+ etc/slurm.conf.example \
+ etc/slurmdbd.conf.example
+ exeinto /etc/slurm
+ keepdir /etc/slurm/layouts.d
+ insinto /etc/slurm/layouts.d
+ newins etc/layouts.d.power.conf.example power.conf.example
+ newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
+ newins etc/layouts.d.unit.conf.example unit.conf.example
+ # install init.d files
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
+ # install conf.d files
+ newconfd "${FILESDIR}/slurm.confd" slurm
+ # install logrotate file
+ insinto /etc/logrotate.d
+ newins "${FILESDIR}/logrotate" slurm
+ # install bashcomp
+ newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
+ bashcomp_alias scontrol \
+ sreport sacctmgr squeue scancel sshare sbcast sinfo \
+ sprio sacct salloc sbatch srun sattach sdiag sstat
+ # install systemd files
+ systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
+ systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
+}
+
+pkg_preinst() {
+ if use munge; then
+ sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
+ fi
+}
+
+create_folders_and_fix_permissions() {
+ einfo "Fixing permissions in ${@}"
+ mkdir -p ${@} || die
+ chown -R ${PN}:${PN} ${@} || die
+}
+
+pkg_postinst() {
+ paths=(
+ "${EROOT}"/var/${PN}/checkpoint
+ "${EROOT}"/var/${PN}
+ "${EROOT}"/var/spool/${PN}/slurmd
+ "${EROOT}"/var/spool/${PN}
+ "${EROOT}"/var/log/${PN}
+ /var/tmp/${PN}/${PN}d
+ /var/tmp/${PN}
+ /run/${PN}
+ )
+ local folder_path
+ for folder_path in ${paths[@]}; do
+ create_folders_and_fix_permissions $folder_path
+ done
+ echo
+
+ elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
+ elog "through a (javascript enabled) browser to create a configureation file."
+ elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
+ echo
+ elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
+ elog "Your kernel must be compiled with the wanted cgroup feature:"
+ elog " For the proctrack plugin:"
+ elog " freezer"
+ elog " For the task plugin:"
+ elog " cpuset, memory, devices"
+ elog " For the accounting plugin:"
+ elog " cpuacct, memory, blkio"
+ elog "Then, set these options in /etc/slurm/slurm.conf:"
+ elog " ProctrackType=proctrack/cgroup"
+ elog " TaskPlugin=task/cgroup"
+ einfo
+ ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
+ for folder_path in ${paths[@]}; do
+ ewarn " ${folder_path}"
+ done
+}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2020-05-14 14:21 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2020-05-14 14:21 UTC (permalink / raw
To: gentoo-commits
commit: e8714b48b1830259838f810b13c6f24a4d1b994d
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Thu May 14 14:21:29 2020 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Thu May 14 14:21:53 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e8714b48
sys-cluster/slurm: Drop old
Package-Manager: Portage-2.3.99, Repoman-2.3.22
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/Manifest | 4 -
sys-cluster/slurm/slurm-19.05.4.1.ebuild | 264 -------------------------------
sys-cluster/slurm/slurm-19.05.5.1.ebuild | 264 -------------------------------
sys-cluster/slurm/slurm-20.02.0.1.ebuild | 263 ------------------------------
sys-cluster/slurm/slurm-20.02.1.1.ebuild | 263 ------------------------------
5 files changed, 1058 deletions(-)
diff --git a/sys-cluster/slurm/Manifest b/sys-cluster/slurm/Manifest
index 7950e8cc9ae..fb495d39b96 100644
--- a/sys-cluster/slurm/Manifest
+++ b/sys-cluster/slurm/Manifest
@@ -1,5 +1 @@
-DIST slurm-19-05-4-1.tar.gz 8446001 BLAKE2B d3b1524a72d7969b14788b93c7d64b03faf159b71b1ed8fb30782980b7b39e9f4a1d1435f4fbdce722ed9585e7d3285f9a84322c5a5d2f44d5e084bb38019ae4 SHA512 ecee26b23fc72ea4b6eb3039aada1814b5932d75eaf61501a31b97ac8f7b600864f2429a36de068f1f1cde178fa1383f2c53192af5b1a62766e3ffe48be4395c
-DIST slurm-19-05-5-1.tar.gz 8447611 BLAKE2B 052d6a9c7e196546a2a7ca0c8e324d3728177e06a6b82150d6888cf5f6aa4b0f6612e09e928b2224be412971b4e40318d3b03e27068ed7c2256036a417ebf9c5 SHA512 612ce1c476de3d08d4003c48df65883880e697652ef8b0847cd87719e91196f489409b27c67ef040ab9ffe0c9d824cdae6441608e9af9619abcf11ebf0d464be
-DIST slurm-20-02-0-1.tar.gz 8657581 BLAKE2B 402bb9c9a87055940ca525eb5c5e37cb62ad8957ae626682109e885834e6e17e93e3964f65b66c17c5ecc611271bd19709290f7ab79398c8c6b5aa762e476b50 SHA512 2c27133c8598cbb4ad0e6d186732f83cfb1b12460fddd89646b41a4d7c8239afff795db22345216f76ba5b666f1d5c2642dcfcbf38285f66d748424b60f9598a
-DIST slurm-20-02-1-1.tar.gz 8660993 BLAKE2B 8f3a6ce0177410ae25490bb995fc14696002a22a8a0ec82d97f697fe5898c8c7d07fe2ad4ab824e1056f3be59adb2cb30b3e89a50a529e786a59aacab5cc6673 SHA512 a0974f52a561dc7596a9a7aeea4f09075a97dc30c729e59aef625584264e5b4ae003466275be379bae42a2a0e0be0c910b9349d3e7c6631f18969518ac9a0910
DIST slurm-20-02-2-1.tar.gz 8680227 BLAKE2B 9058c5161a3e087201b17484fbb8430d2af392b4abec4cfea3b6a882609bb978987a8e6aeda512b08def8010403c9f0893827632358225c15c374d15a583432f SHA512 6ed8628be442138c90f0f497846679eb2a4ea8e2c612d31c1276cc451333663bf310719a8f823dc873536343065186dc5f26871ce80340c0bdb71ab564620513
diff --git a/sys-cluster/slurm/slurm-19.05.4.1.ebuild b/sys-cluster/slurm/slurm-19.05.4.1.ebuild
deleted file mode 100644
index e412669c3ed..00000000000
--- a/sys-cluster/slurm/slurm-19.05.4.1.ebuild
+++ /dev/null
@@ -1,264 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-if [[ ${PV} == *9999* ]]; then
- EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
- INHERIT_GIT="git-r3"
- SRC_URI=""
- KEYWORDS=""
- MY_P="${P}"
-else
- if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
- MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
- else
- MY_PV=$(ver_rs 1-3 '-') # stable releases
- fi
- MY_P="${PN}-${MY_PV}"
- INHERIT_GIT=""
- SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
- KEYWORDS="~amd64 ~x86"
-fi
-
-inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
-
-DESCRIPTION="A Highly Scalable Resource Manager"
-HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
-
-LICENSE="GPL-2"
-SLOT="0"
-IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
-
-COMMON_DEPEND="
- !sys-cluster/torque
- !net-analyzer/slurm
- !net-analyzer/sinfo
- || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
- mysql? (
- || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
- slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
- )
- munge? ( sys-auth/munge )
- pam? ( sys-libs/pam )
- lua? ( dev-lang/lua:0= )
- !lua? ( !dev-lang/lua )
- ipmi? ( sys-libs/freeipmi )
- json? ( dev-libs/json-c:= )
- amd64? ( netloc? ( sys-apps/netloc ) )
- hdf5? ( sci-libs/hdf5:= )
- numa? ( sys-process/numactl )
- ofed? ( sys-fabric/ofed )
- ucx? ( sys-cluster/ucx )
- X? ( net-libs/libssh2 )
- >=sys-apps/hwloc-1.1.1-r1
- sys-libs/ncurses:0=
- app-arch/lz4:0=
- sys-libs/readline:0="
-DEPEND="${COMMON_DEPEND}
- html? ( sys-apps/man2html )"
-RDEPEND="${OMMON_DEPEND}
- acct-user/slurm
- acct-group/slurm
- dev-libs/libcgroup"
-
-REQUIRED_USE="torque? ( perl )"
-
-S="${WORKDIR}/${PN}-${MY_P}"
-
-LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
-LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
-
-RESTRICT="test"
-
-src_unpack() {
- if [[ ${PV} == *9999* ]]; then
- git-r3_src_unpack
- else
- default
- fi
-}
-
-src_prepare() {
- tc-ld-disable-gold
- eapply "${FILESDIR}"/disable-sview.patch
- default
-
- # pids should go to /var/run/slurm
- sed \
- -e 's:/tmp:/var/tmp:g' \
- -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
- -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
- -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
- -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
- -i "${S}/etc/slurm.conf.example" \
- || die "Can't sed for /var/run/slurmctld.pid"
- sed \
- -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
- -i "${S}/etc/slurmdbd.conf.example" \
- || die "Can't sed for /var/run/slurmdbd.pid"
- # gentooify systemd services
- sed \
- -e 's:sysconfig/.*:conf.d/slurm:g' \
- -e 's:var/run/:run/slurm/:g' \
- -e '/^EnvironmentFile=.*/d' \
- -i "${S}/etc"/*.service.in \
- || die "Can't sed systemd services for sysconfig or var/run/"
-
- hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
- eautoreconf
-}
-
-src_configure() {
- local myconf=(
- --sysconfdir="${EPREFIX}/etc/${PN}"
- --with-hwloc="${EPREFIX}/usr"
- --htmldir="${EPREFIX}/usr/share/doc/${PF}"
- )
- use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
- use mysql || myconf+=( --without-mysql_config )
- use amd64 && myconf+=( $(use_with netloc) )
- econf "${myconf[@]}" \
- $(use_enable debug) \
- $(use_enable pam) \
- $(use_enable X x11) \
- $(use_with munge) \
- $(use_with json) \
- $(use_with hdf5) \
- $(use_with ofed) \
- $(use_with ucx) \
- $(use_enable static-libs static) \
- $(use_enable multiple-slurmd)
-
- # --htmldir does not seems to propagate... Documentations are installed
- # in /usr/share/doc/slurm-2.3.0/html
- # instead of /usr/share/doc/slurm-2.3.0.2/html
- sed \
- -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
- -i doc/html/Makefile || die
- if use perl ; then
- # small hack to make it compile
- mkdir -p "${S}/src/api/.libs" || die
- mkdir -p "${S}/src/db_api/.libs" || die
- touch "${S}/src/api/.libs/libslurm.so" || die
- touch "${S}/src/db_api/.libs/libslurmdb.so" || die
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${S}" || die
- rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
- fi
-}
-
-src_compile() {
- default
- use pam && emake -C contribs/pam
- if use perl ; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_compile
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
- cd "${S}" || die
- fi
- use torque && emake -C contribs/torque
-}
-
-src_install() {
- default
- use pam && emake DESTDIR="${D}" -C contribs/pam install
- if use perl; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_install
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_install
- cd "${S}" || die
- fi
- if use torque; then
- emake DESTDIR="${D}" -C contribs/torque
- rm -f "${D}"/usr/bin/mpiexec || die
- fi
- use static-libs || find "${ED}" -name '*.la' -exec rm {} +
- # install sample configs
- keepdir /etc/slurm
- insinto /etc/slurm
- doins \
- etc/bluegene.conf.example \
- etc/cgroup.conf.example \
- etc/slurm.conf.example \
- etc/slurmdbd.conf.example
- exeinto /etc/slurm
- keepdir /etc/slurm/layouts.d
- insinto /etc/slurm/layouts.d
- newins etc/layouts.d.power.conf.example power.conf.example
- newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
- newins etc/layouts.d.unit.conf.example unit.conf.example
- # install init.d files
- newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
- newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
- newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
- # install conf.d files
- newconfd "${FILESDIR}/slurm.confd" slurm
- # install logrotate file
- insinto /etc/logrotate.d
- newins "${FILESDIR}/logrotate" slurm
- # install bashcomp
- newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
- bashcomp_alias scontrol \
- sreport sacctmgr squeue scancel sshare sbcast sinfo \
- sprio sacct salloc sbatch srun sattach sdiag sstat
- # install systemd files
- systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
- systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
-}
-
-pkg_preinst() {
- if use munge; then
- sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
- fi
-}
-
-create_folders_and_fix_permissions() {
- einfo "Fixing permissions in ${@}"
- mkdir -p ${@} || die
- chown -R ${PN}:${PN} ${@} || die
-}
-
-pkg_postinst() {
- paths=(
- "${EROOT}"/var/${PN}/checkpoint
- "${EROOT}"/var/${PN}
- "${EROOT}"/var/spool/${PN}/slurmd
- "${EROOT}"/var/spool/${PN}
- "${EROOT}"/var/log/${PN}
- /var/tmp/${PN}/${PN}d
- /var/tmp/${PN}
- /run/${PN}
- )
- local folder_path
- for folder_path in ${paths[@]}; do
- create_folders_and_fix_permissions $folder_path
- done
- echo
-
- elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
- elog "through a (javascript enabled) browser to create a configureation file."
- elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
- echo
- elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
- elog "Your kernel must be compiled with the wanted cgroup feature:"
- elog " For the proctrack plugin:"
- elog " freezer"
- elog " For the task plugin:"
- elog " cpuset, memory, devices"
- elog " For the accounting plugin:"
- elog " cpuacct, memory, blkio"
- elog "Then, set these options in /etc/slurm/slurm.conf:"
- elog " ProctrackType=proctrack/cgroup"
- elog " TaskPlugin=task/cgroup"
- einfo
- ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
- for folder_path in ${paths[@]}; do
- ewarn " ${folder_path}"
- done
-}
diff --git a/sys-cluster/slurm/slurm-19.05.5.1.ebuild b/sys-cluster/slurm/slurm-19.05.5.1.ebuild
deleted file mode 100644
index 770a3e53390..00000000000
--- a/sys-cluster/slurm/slurm-19.05.5.1.ebuild
+++ /dev/null
@@ -1,264 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-if [[ ${PV} == *9999* ]]; then
- EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
- INHERIT_GIT="git-r3"
- SRC_URI=""
- KEYWORDS=""
- MY_P="${P}"
-else
- if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
- MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
- else
- MY_PV=$(ver_rs 1-3 '-') # stable releases
- fi
- MY_P="${PN}-${MY_PV}"
- INHERIT_GIT=""
- SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
- KEYWORDS="~amd64 ~x86"
-fi
-
-inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
-
-DESCRIPTION="A Highly Scalable Resource Manager"
-HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
-
-LICENSE="GPL-2"
-SLOT="0"
-IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
-
-COMMON_DEPEND="
- !sys-cluster/torque
- !net-analyzer/slurm
- !net-analyzer/sinfo
- || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
- mysql? (
- || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
- slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
- )
- munge? ( sys-auth/munge )
- pam? ( sys-libs/pam )
- lua? ( dev-lang/lua:0= )
- !lua? ( !dev-lang/lua )
- ipmi? ( sys-libs/freeipmi )
- json? ( dev-libs/json-c:= )
- amd64? ( netloc? ( sys-apps/netloc ) )
- hdf5? ( sci-libs/hdf5:= )
- numa? ( sys-process/numactl )
- ofed? ( sys-fabric/ofed )
- ucx? ( sys-cluster/ucx )
- X? ( net-libs/libssh2 )
- >=sys-apps/hwloc-1.1.1-r1
- sys-libs/ncurses:0=
- app-arch/lz4:0=
- sys-libs/readline:0="
-DEPEND="${COMMON_DEPEND}
- html? ( sys-apps/man2html )"
-RDEPEND="${OMMON_DEPEND}
- acct-user/slurm
- acct-group/slurm
- dev-libs/libcgroup"
-
-REQUIRED_USE="torque? ( perl )"
-
-S="${WORKDIR}/${PN}-${MY_P}"
-
-LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
-LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
-
-RESTRICT="test"
-
-src_unpack() {
- if [[ ${PV} == *9999* ]]; then
- git-r3_src_unpack
- else
- default
- fi
-}
-
-src_prepare() {
- tc-ld-disable-gold
- eapply "${FILESDIR}"/disable-sview.patch
- default
-
- # pids should go to /var/run/slurm
- sed \
- -e 's:/tmp:/var/tmp:g' \
- -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
- -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
- -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
- -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
- -i "${S}/etc/slurm.conf.example" \
- || die "Can't sed for /var/run/slurmctld.pid"
- sed \
- -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
- -i "${S}/etc/slurmdbd.conf.example" \
- || die "Can't sed for /var/run/slurmdbd.pid"
- # gentooify systemd services
- sed \
- -e 's:sysconfig/.*:conf.d/slurm:g' \
- -e 's:var/run/:run/slurm/:g' \
- -e '/^EnvironmentFile=.*/d' \
- -i "${S}/etc"/*.service.in \
- || die "Can't sed systemd services for sysconfig or var/run/"
-
- hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
- eautoreconf
-}
-
-src_configure() {
- local myconf=(
- --sysconfdir="${EPREFIX}/etc/${PN}"
- --with-hwloc="${EPREFIX}/usr"
- --htmldir="${EPREFIX}/usr/share/doc/${PF}"
- )
- use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
- use mysql || myconf+=( --without-mysql_config )
- use amd64 && myconf+=( $(use_with netloc) )
- econf "${myconf[@]}" \
- $(use_enable debug) \
- $(use_enable pam) \
- $(use_enable X x11) \
- $(use_with munge) \
- $(use_with json) \
- $(use_with hdf5) \
- $(use_with ofed) \
- $(use_with ucx) \
- $(use_enable static-libs static) \
- $(use_enable multiple-slurmd)
-
- # --htmldir does not seems to propagate... Documentations are installed
- # in /usr/share/doc/slurm-2.3.0/html
- # instead of /usr/share/doc/slurm-2.3.0.2/html
- sed \
- -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
- -i doc/html/Makefile || die
- if use perl ; then
- # small hack to make it compile
- mkdir -p "${S}/src/api/.libs" || die
- mkdir -p "${S}/src/db_api/.libs" || die
- touch "${S}/src/api/.libs/libslurm.so" || die
- touch "${S}/src/db_api/.libs/libslurmdb.so" || die
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${S}" || die
- rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
- fi
-}
-
-src_compile() {
- default
- use pam && emake -C contribs/pam
- if use perl ; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_compile
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
- cd "${S}" || die
- fi
- use torque && emake -C contribs/torque
-}
-
-src_install() {
- default
- use pam && emake DESTDIR="${D}" -C contribs/pam install
- if use perl; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_install
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_install
- cd "${S}" || die
- fi
- if use torque; then
- emake DESTDIR="${D}" -C contribs/torque
- rm -f "${D}"/usr/bin/mpiexec || die
- fi
- use static-libs || find "${ED}" -name '*.la' -exec rm {} +
- # install sample configs
- keepdir /etc/slurm
- insinto /etc/slurm
- doins \
- etc/prolog.example \
- etc/cgroup.conf.example \
- etc/slurm.conf.example \
- etc/slurmdbd.conf.example
- exeinto /etc/slurm
- keepdir /etc/slurm/layouts.d
- insinto /etc/slurm/layouts.d
- newins etc/layouts.d.power.conf.example power.conf.example
- newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
- newins etc/layouts.d.unit.conf.example unit.conf.example
- # install init.d files
- newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
- newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
- newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
- # install conf.d files
- newconfd "${FILESDIR}/slurm.confd" slurm
- # install logrotate file
- insinto /etc/logrotate.d
- newins "${FILESDIR}/logrotate" slurm
- # install bashcomp
- newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
- bashcomp_alias scontrol \
- sreport sacctmgr squeue scancel sshare sbcast sinfo \
- sprio sacct salloc sbatch srun sattach sdiag sstat
- # install systemd files
- systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
- systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
-}
-
-pkg_preinst() {
- if use munge; then
- sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
- fi
-}
-
-create_folders_and_fix_permissions() {
- einfo "Fixing permissions in ${@}"
- mkdir -p ${@} || die
- chown -R ${PN}:${PN} ${@} || die
-}
-
-pkg_postinst() {
- paths=(
- "${EROOT}"/var/${PN}/checkpoint
- "${EROOT}"/var/${PN}
- "${EROOT}"/var/spool/${PN}/slurmd
- "${EROOT}"/var/spool/${PN}
- "${EROOT}"/var/log/${PN}
- /var/tmp/${PN}/${PN}d
- /var/tmp/${PN}
- /run/${PN}
- )
- local folder_path
- for folder_path in ${paths[@]}; do
- create_folders_and_fix_permissions $folder_path
- done
- echo
-
- elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
- elog "through a (javascript enabled) browser to create a configureation file."
- elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
- echo
- elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
- elog "Your kernel must be compiled with the wanted cgroup feature:"
- elog " For the proctrack plugin:"
- elog " freezer"
- elog " For the task plugin:"
- elog " cpuset, memory, devices"
- elog " For the accounting plugin:"
- elog " cpuacct, memory, blkio"
- elog "Then, set these options in /etc/slurm/slurm.conf:"
- elog " ProctrackType=proctrack/cgroup"
- elog " TaskPlugin=task/cgroup"
- einfo
- ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
- for folder_path in ${paths[@]}; do
- ewarn " ${folder_path}"
- done
-}
diff --git a/sys-cluster/slurm/slurm-20.02.0.1.ebuild b/sys-cluster/slurm/slurm-20.02.0.1.ebuild
deleted file mode 100644
index a2a4e4bd829..00000000000
--- a/sys-cluster/slurm/slurm-20.02.0.1.ebuild
+++ /dev/null
@@ -1,263 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-if [[ ${PV} == *9999* ]]; then
- EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
- INHERIT_GIT="git-r3"
- MY_P="${P}"
-else
- if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
- MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
- else
- MY_PV=$(ver_rs 1-3 '-') # stable releases
- fi
- MY_P="${PN}-${MY_PV}"
- INHERIT_GIT=""
- SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
- KEYWORDS="~amd64 ~x86"
-fi
-
-inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
-
-DESCRIPTION="A Highly Scalable Resource Manager"
-HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
-
-LICENSE="GPL-2"
-SLOT="0"
-IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
-
-COMMON_DEPEND="
- !sys-cluster/torque
- !net-analyzer/slurm
- !net-analyzer/sinfo
- || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
- mysql? (
- || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
- slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
- )
- munge? ( sys-auth/munge )
- pam? ( sys-libs/pam )
- lua? ( dev-lang/lua:0= )
- !lua? ( !dev-lang/lua )
- ipmi? ( sys-libs/freeipmi )
- json? ( dev-libs/json-c:= )
- amd64? ( netloc? ( sys-apps/netloc ) )
- hdf5? ( sci-libs/hdf5:= )
- numa? ( sys-process/numactl )
- ofed? ( sys-fabric/ofed )
- ucx? ( sys-cluster/ucx )
- X? ( net-libs/libssh2 )
- >=sys-apps/hwloc-1.1.1-r1
- sys-libs/ncurses:0=
- app-arch/lz4:0=
- sys-libs/readline:0="
-DEPEND="${COMMON_DEPEND}
- html? ( sys-apps/man2html )"
-RDEPEND="${OMMON_DEPEND}
- acct-user/slurm
- acct-group/slurm
- dev-libs/libcgroup"
-
-REQUIRED_USE="torque? ( perl )"
-
-S="${WORKDIR}/${PN}-${MY_P}"
-
-LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
-LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
-
-RESTRICT="test"
-
-src_unpack() {
- if [[ ${PV} == *9999* ]]; then
- git-r3_src_unpack
- else
- default
- fi
-}
-
-src_prepare() {
- tc-ld-disable-gold
- default
-
- # pids should go to /var/run/slurm
- sed \
- -e 's:/tmp:/var/tmp:g' \
- -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
- -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
- -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
- -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
- -i "${S}/etc/slurm.conf.example" \
- || die "Can't sed for /var/run/slurmctld.pid"
- sed \
- -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
- -i "${S}/etc/slurmdbd.conf.example" \
- || die "Can't sed for /var/run/slurmdbd.pid"
- # gentooify systemd services
- sed \
- -e 's:sysconfig/.*:conf.d/slurm:g' \
- -e 's:var/run/:run/slurm/:g' \
- -e '/^EnvironmentFile=.*/d' \
- -i "${S}/etc"/*.service.in \
- || die "Can't sed systemd services for sysconfig or var/run/"
-
- sed -e '/AM_PATH_GTK_2_0/d' -i configure.ac || die
-
- hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
- eautoreconf
-}
-
-src_configure() {
- local myconf=(
- --sysconfdir="${EPREFIX}/etc/${PN}"
- --with-hwloc="${EPREFIX}/usr"
- --htmldir="${EPREFIX}/usr/share/doc/${PF}"
- )
- use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
- use mysql || myconf+=( --without-mysql_config )
- use amd64 && myconf+=( $(use_with netloc) )
- econf "${myconf[@]}" \
- $(use_enable debug) \
- $(use_enable pam) \
- $(use_enable X x11) \
- $(use_with munge) \
- $(use_with json) \
- $(use_with hdf5) \
- $(use_with ofed) \
- $(use_with ucx) \
- $(use_enable static-libs static) \
- $(use_enable multiple-slurmd)
-
- # --htmldir does not seems to propagate... Documentations are installed
- # in /usr/share/doc/slurm-2.3.0/html
- # instead of /usr/share/doc/slurm-2.3.0.2/html
- sed \
- -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
- -i doc/html/Makefile || die
- if use perl ; then
- # small hack to make it compile
- mkdir -p "${S}/src/api/.libs" || die
- mkdir -p "${S}/src/db_api/.libs" || die
- touch "${S}/src/api/.libs/libslurm.so" || die
- touch "${S}/src/db_api/.libs/libslurmdb.so" || die
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${S}" || die
- rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
- fi
-}
-
-src_compile() {
- default
- use pam && emake -C contribs/pam
- if use perl ; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_compile
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
- cd "${S}" || die
- fi
- use torque && emake -C contribs/torque
-}
-
-src_install() {
- default
- use pam && emake DESTDIR="${D}" -C contribs/pam install
- if use perl; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_install
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_install
- cd "${S}" || die
- fi
- if use torque; then
- emake DESTDIR="${D}" -C contribs/torque
- rm -f "${D}"/usr/bin/mpiexec || die
- fi
- use static-libs || find "${ED}" -name '*.la' -exec rm {} +
- # install sample configs
- keepdir /etc/slurm
- insinto /etc/slurm
- doins \
- etc/prolog.example \
- etc/cgroup.conf.example \
- etc/slurm.conf.example \
- etc/slurmdbd.conf.example
- exeinto /etc/slurm
- keepdir /etc/slurm/layouts.d
- insinto /etc/slurm/layouts.d
- newins etc/layouts.d.power.conf.example power.conf.example
- newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
- newins etc/layouts.d.unit.conf.example unit.conf.example
- # install init.d files
- newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
- newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
- newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
- # install conf.d files
- newconfd "${FILESDIR}/slurm.confd" slurm
- # install logrotate file
- insinto /etc/logrotate.d
- newins "${FILESDIR}/logrotate" slurm
- # install bashcomp
- newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
- bashcomp_alias scontrol \
- sreport sacctmgr squeue scancel sshare sbcast sinfo \
- sprio sacct salloc sbatch srun sattach sdiag sstat
- # install systemd files
- systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
- systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
-}
-
-pkg_preinst() {
- if use munge; then
- sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
- fi
-}
-
-create_folders_and_fix_permissions() {
- einfo "Fixing permissions in ${@}"
- mkdir -p ${@} || die
- chown -R ${PN}:${PN} ${@} || die
-}
-
-pkg_postinst() {
- paths=(
- "${EROOT}"/var/${PN}/checkpoint
- "${EROOT}"/var/${PN}
- "${EROOT}"/var/spool/${PN}/slurmd
- "${EROOT}"/var/spool/${PN}
- "${EROOT}"/var/log/${PN}
- /var/tmp/${PN}/${PN}d
- /var/tmp/${PN}
- /run/${PN}
- )
- local folder_path
- for folder_path in ${paths[@]}; do
- create_folders_and_fix_permissions $folder_path
- done
- echo
-
- elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
- elog "through a (javascript enabled) browser to create a configureation file."
- elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
- echo
- elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
- elog "Your kernel must be compiled with the wanted cgroup feature:"
- elog " For the proctrack plugin:"
- elog " freezer"
- elog " For the task plugin:"
- elog " cpuset, memory, devices"
- elog " For the accounting plugin:"
- elog " cpuacct, memory, blkio"
- elog "Then, set these options in /etc/slurm/slurm.conf:"
- elog " ProctrackType=proctrack/cgroup"
- elog " TaskPlugin=task/cgroup"
- einfo
- ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
- for folder_path in ${paths[@]}; do
- ewarn " ${folder_path}"
- done
-}
diff --git a/sys-cluster/slurm/slurm-20.02.1.1.ebuild b/sys-cluster/slurm/slurm-20.02.1.1.ebuild
deleted file mode 100644
index a2a4e4bd829..00000000000
--- a/sys-cluster/slurm/slurm-20.02.1.1.ebuild
+++ /dev/null
@@ -1,263 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-if [[ ${PV} == *9999* ]]; then
- EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
- INHERIT_GIT="git-r3"
- MY_P="${P}"
-else
- if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
- MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
- else
- MY_PV=$(ver_rs 1-3 '-') # stable releases
- fi
- MY_P="${PN}-${MY_PV}"
- INHERIT_GIT=""
- SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
- KEYWORDS="~amd64 ~x86"
-fi
-
-inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
-
-DESCRIPTION="A Highly Scalable Resource Manager"
-HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
-
-LICENSE="GPL-2"
-SLOT="0"
-IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
-
-COMMON_DEPEND="
- !sys-cluster/torque
- !net-analyzer/slurm
- !net-analyzer/sinfo
- || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
- mysql? (
- || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
- slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
- )
- munge? ( sys-auth/munge )
- pam? ( sys-libs/pam )
- lua? ( dev-lang/lua:0= )
- !lua? ( !dev-lang/lua )
- ipmi? ( sys-libs/freeipmi )
- json? ( dev-libs/json-c:= )
- amd64? ( netloc? ( sys-apps/netloc ) )
- hdf5? ( sci-libs/hdf5:= )
- numa? ( sys-process/numactl )
- ofed? ( sys-fabric/ofed )
- ucx? ( sys-cluster/ucx )
- X? ( net-libs/libssh2 )
- >=sys-apps/hwloc-1.1.1-r1
- sys-libs/ncurses:0=
- app-arch/lz4:0=
- sys-libs/readline:0="
-DEPEND="${COMMON_DEPEND}
- html? ( sys-apps/man2html )"
-RDEPEND="${OMMON_DEPEND}
- acct-user/slurm
- acct-group/slurm
- dev-libs/libcgroup"
-
-REQUIRED_USE="torque? ( perl )"
-
-S="${WORKDIR}/${PN}-${MY_P}"
-
-LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
-LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
-
-RESTRICT="test"
-
-src_unpack() {
- if [[ ${PV} == *9999* ]]; then
- git-r3_src_unpack
- else
- default
- fi
-}
-
-src_prepare() {
- tc-ld-disable-gold
- default
-
- # pids should go to /var/run/slurm
- sed \
- -e 's:/tmp:/var/tmp:g' \
- -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
- -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
- -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
- -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
- -i "${S}/etc/slurm.conf.example" \
- || die "Can't sed for /var/run/slurmctld.pid"
- sed \
- -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
- -i "${S}/etc/slurmdbd.conf.example" \
- || die "Can't sed for /var/run/slurmdbd.pid"
- # gentooify systemd services
- sed \
- -e 's:sysconfig/.*:conf.d/slurm:g' \
- -e 's:var/run/:run/slurm/:g' \
- -e '/^EnvironmentFile=.*/d' \
- -i "${S}/etc"/*.service.in \
- || die "Can't sed systemd services for sysconfig or var/run/"
-
- sed -e '/AM_PATH_GTK_2_0/d' -i configure.ac || die
-
- hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
- eautoreconf
-}
-
-src_configure() {
- local myconf=(
- --sysconfdir="${EPREFIX}/etc/${PN}"
- --with-hwloc="${EPREFIX}/usr"
- --htmldir="${EPREFIX}/usr/share/doc/${PF}"
- )
- use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
- use mysql || myconf+=( --without-mysql_config )
- use amd64 && myconf+=( $(use_with netloc) )
- econf "${myconf[@]}" \
- $(use_enable debug) \
- $(use_enable pam) \
- $(use_enable X x11) \
- $(use_with munge) \
- $(use_with json) \
- $(use_with hdf5) \
- $(use_with ofed) \
- $(use_with ucx) \
- $(use_enable static-libs static) \
- $(use_enable multiple-slurmd)
-
- # --htmldir does not seems to propagate... Documentations are installed
- # in /usr/share/doc/slurm-2.3.0/html
- # instead of /usr/share/doc/slurm-2.3.0.2/html
- sed \
- -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
- -i doc/html/Makefile || die
- if use perl ; then
- # small hack to make it compile
- mkdir -p "${S}/src/api/.libs" || die
- mkdir -p "${S}/src/db_api/.libs" || die
- touch "${S}/src/api/.libs/libslurm.so" || die
- touch "${S}/src/db_api/.libs/libslurmdb.so" || die
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${S}" || die
- rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
- fi
-}
-
-src_compile() {
- default
- use pam && emake -C contribs/pam
- if use perl ; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_compile
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
- cd "${S}" || die
- fi
- use torque && emake -C contribs/torque
-}
-
-src_install() {
- default
- use pam && emake DESTDIR="${D}" -C contribs/pam install
- if use perl; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_install
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_install
- cd "${S}" || die
- fi
- if use torque; then
- emake DESTDIR="${D}" -C contribs/torque
- rm -f "${D}"/usr/bin/mpiexec || die
- fi
- use static-libs || find "${ED}" -name '*.la' -exec rm {} +
- # install sample configs
- keepdir /etc/slurm
- insinto /etc/slurm
- doins \
- etc/prolog.example \
- etc/cgroup.conf.example \
- etc/slurm.conf.example \
- etc/slurmdbd.conf.example
- exeinto /etc/slurm
- keepdir /etc/slurm/layouts.d
- insinto /etc/slurm/layouts.d
- newins etc/layouts.d.power.conf.example power.conf.example
- newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
- newins etc/layouts.d.unit.conf.example unit.conf.example
- # install init.d files
- newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
- newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
- newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
- # install conf.d files
- newconfd "${FILESDIR}/slurm.confd" slurm
- # install logrotate file
- insinto /etc/logrotate.d
- newins "${FILESDIR}/logrotate" slurm
- # install bashcomp
- newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
- bashcomp_alias scontrol \
- sreport sacctmgr squeue scancel sshare sbcast sinfo \
- sprio sacct salloc sbatch srun sattach sdiag sstat
- # install systemd files
- systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
- systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
-}
-
-pkg_preinst() {
- if use munge; then
- sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
- fi
-}
-
-create_folders_and_fix_permissions() {
- einfo "Fixing permissions in ${@}"
- mkdir -p ${@} || die
- chown -R ${PN}:${PN} ${@} || die
-}
-
-pkg_postinst() {
- paths=(
- "${EROOT}"/var/${PN}/checkpoint
- "${EROOT}"/var/${PN}
- "${EROOT}"/var/spool/${PN}/slurmd
- "${EROOT}"/var/spool/${PN}
- "${EROOT}"/var/log/${PN}
- /var/tmp/${PN}/${PN}d
- /var/tmp/${PN}
- /run/${PN}
- )
- local folder_path
- for folder_path in ${paths[@]}; do
- create_folders_and_fix_permissions $folder_path
- done
- echo
-
- elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
- elog "through a (javascript enabled) browser to create a configureation file."
- elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
- echo
- elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
- elog "Your kernel must be compiled with the wanted cgroup feature:"
- elog " For the proctrack plugin:"
- elog " freezer"
- elog " For the task plugin:"
- elog " cpuset, memory, devices"
- elog " For the accounting plugin:"
- elog " cpuacct, memory, blkio"
- elog "Then, set these options in /etc/slurm/slurm.conf:"
- elog " ProctrackType=proctrack/cgroup"
- elog " TaskPlugin=task/cgroup"
- einfo
- ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
- for folder_path in ${paths[@]}; do
- ewarn " ${folder_path}"
- done
-}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2020-05-14 14:21 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2020-05-14 14:21 UTC (permalink / raw
To: gentoo-commits
commit: 37090d8bbcf9e6923340e8a629e270c94810e3b1
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Thu May 14 14:20:11 2020 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Thu May 14 14:21:53 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=37090d8b
sys-cluster/slurm: Version bump (v20.02.2.1)
Package-Manager: Portage-2.3.99, Repoman-2.3.22
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/Manifest | 1 +
sys-cluster/slurm/slurm-20.02.2.1.ebuild | 263 +++++++++++++++++++++++++++++++
2 files changed, 264 insertions(+)
diff --git a/sys-cluster/slurm/Manifest b/sys-cluster/slurm/Manifest
index 91e8bb4d295..7950e8cc9ae 100644
--- a/sys-cluster/slurm/Manifest
+++ b/sys-cluster/slurm/Manifest
@@ -2,3 +2,4 @@ DIST slurm-19-05-4-1.tar.gz 8446001 BLAKE2B d3b1524a72d7969b14788b93c7d64b03faf1
DIST slurm-19-05-5-1.tar.gz 8447611 BLAKE2B 052d6a9c7e196546a2a7ca0c8e324d3728177e06a6b82150d6888cf5f6aa4b0f6612e09e928b2224be412971b4e40318d3b03e27068ed7c2256036a417ebf9c5 SHA512 612ce1c476de3d08d4003c48df65883880e697652ef8b0847cd87719e91196f489409b27c67ef040ab9ffe0c9d824cdae6441608e9af9619abcf11ebf0d464be
DIST slurm-20-02-0-1.tar.gz 8657581 BLAKE2B 402bb9c9a87055940ca525eb5c5e37cb62ad8957ae626682109e885834e6e17e93e3964f65b66c17c5ecc611271bd19709290f7ab79398c8c6b5aa762e476b50 SHA512 2c27133c8598cbb4ad0e6d186732f83cfb1b12460fddd89646b41a4d7c8239afff795db22345216f76ba5b666f1d5c2642dcfcbf38285f66d748424b60f9598a
DIST slurm-20-02-1-1.tar.gz 8660993 BLAKE2B 8f3a6ce0177410ae25490bb995fc14696002a22a8a0ec82d97f697fe5898c8c7d07fe2ad4ab824e1056f3be59adb2cb30b3e89a50a529e786a59aacab5cc6673 SHA512 a0974f52a561dc7596a9a7aeea4f09075a97dc30c729e59aef625584264e5b4ae003466275be379bae42a2a0e0be0c910b9349d3e7c6631f18969518ac9a0910
+DIST slurm-20-02-2-1.tar.gz 8680227 BLAKE2B 9058c5161a3e087201b17484fbb8430d2af392b4abec4cfea3b6a882609bb978987a8e6aeda512b08def8010403c9f0893827632358225c15c374d15a583432f SHA512 6ed8628be442138c90f0f497846679eb2a4ea8e2c612d31c1276cc451333663bf310719a8f823dc873536343065186dc5f26871ce80340c0bdb71ab564620513
diff --git a/sys-cluster/slurm/slurm-20.02.2.1.ebuild b/sys-cluster/slurm/slurm-20.02.2.1.ebuild
new file mode 100644
index 00000000000..a2a4e4bd829
--- /dev/null
+++ b/sys-cluster/slurm/slurm-20.02.2.1.ebuild
@@ -0,0 +1,263 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+if [[ ${PV} == *9999* ]]; then
+ EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
+ INHERIT_GIT="git-r3"
+ MY_P="${P}"
+else
+ if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
+ MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
+ else
+ MY_PV=$(ver_rs 1-3 '-') # stable releases
+ fi
+ MY_P="${PN}-${MY_PV}"
+ INHERIT_GIT=""
+ SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
+ KEYWORDS="~amd64 ~x86"
+fi
+
+inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
+
+DESCRIPTION="A Highly Scalable Resource Manager"
+HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
+
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
+
+COMMON_DEPEND="
+ !sys-cluster/torque
+ !net-analyzer/slurm
+ !net-analyzer/sinfo
+ || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
+ mysql? (
+ || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
+ slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
+ )
+ munge? ( sys-auth/munge )
+ pam? ( sys-libs/pam )
+ lua? ( dev-lang/lua:0= )
+ !lua? ( !dev-lang/lua )
+ ipmi? ( sys-libs/freeipmi )
+ json? ( dev-libs/json-c:= )
+ amd64? ( netloc? ( sys-apps/netloc ) )
+ hdf5? ( sci-libs/hdf5:= )
+ numa? ( sys-process/numactl )
+ ofed? ( sys-fabric/ofed )
+ ucx? ( sys-cluster/ucx )
+ X? ( net-libs/libssh2 )
+ >=sys-apps/hwloc-1.1.1-r1
+ sys-libs/ncurses:0=
+ app-arch/lz4:0=
+ sys-libs/readline:0="
+DEPEND="${COMMON_DEPEND}
+ html? ( sys-apps/man2html )"
+RDEPEND="${OMMON_DEPEND}
+ acct-user/slurm
+ acct-group/slurm
+ dev-libs/libcgroup"
+
+REQUIRED_USE="torque? ( perl )"
+
+S="${WORKDIR}/${PN}-${MY_P}"
+
+LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
+LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
+
+RESTRICT="test"
+
+src_unpack() {
+ if [[ ${PV} == *9999* ]]; then
+ git-r3_src_unpack
+ else
+ default
+ fi
+}
+
+src_prepare() {
+ tc-ld-disable-gold
+ default
+
+ # pids should go to /var/run/slurm
+ sed \
+ -e 's:/tmp:/var/tmp:g' \
+ -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
+ -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
+ -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
+ -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
+ -i "${S}/etc/slurm.conf.example" \
+ || die "Can't sed for /var/run/slurmctld.pid"
+ sed \
+ -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
+ -i "${S}/etc/slurmdbd.conf.example" \
+ || die "Can't sed for /var/run/slurmdbd.pid"
+ # gentooify systemd services
+ sed \
+ -e 's:sysconfig/.*:conf.d/slurm:g' \
+ -e 's:var/run/:run/slurm/:g' \
+ -e '/^EnvironmentFile=.*/d' \
+ -i "${S}/etc"/*.service.in \
+ || die "Can't sed systemd services for sysconfig or var/run/"
+
+ sed -e '/AM_PATH_GTK_2_0/d' -i configure.ac || die
+
+ hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
+ eautoreconf
+}
+
+src_configure() {
+ local myconf=(
+ --sysconfdir="${EPREFIX}/etc/${PN}"
+ --with-hwloc="${EPREFIX}/usr"
+ --htmldir="${EPREFIX}/usr/share/doc/${PF}"
+ )
+ use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
+ use mysql || myconf+=( --without-mysql_config )
+ use amd64 && myconf+=( $(use_with netloc) )
+ econf "${myconf[@]}" \
+ $(use_enable debug) \
+ $(use_enable pam) \
+ $(use_enable X x11) \
+ $(use_with munge) \
+ $(use_with json) \
+ $(use_with hdf5) \
+ $(use_with ofed) \
+ $(use_with ucx) \
+ $(use_enable static-libs static) \
+ $(use_enable multiple-slurmd)
+
+ # --htmldir does not seems to propagate... Documentations are installed
+ # in /usr/share/doc/slurm-2.3.0/html
+ # instead of /usr/share/doc/slurm-2.3.0.2/html
+ sed \
+ -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
+ -i doc/html/Makefile || die
+ if use perl ; then
+ # small hack to make it compile
+ mkdir -p "${S}/src/api/.libs" || die
+ mkdir -p "${S}/src/db_api/.libs" || die
+ touch "${S}/src/api/.libs/libslurm.so" || die
+ touch "${S}/src/db_api/.libs/libslurmdb.so" || die
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${S}" || die
+ rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
+ fi
+}
+
+src_compile() {
+ default
+ use pam && emake -C contribs/pam
+ if use perl ; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_compile
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
+ cd "${S}" || die
+ fi
+ use torque && emake -C contribs/torque
+}
+
+src_install() {
+ default
+ use pam && emake DESTDIR="${D}" -C contribs/pam install
+ if use perl; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_install
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_install
+ cd "${S}" || die
+ fi
+ if use torque; then
+ emake DESTDIR="${D}" -C contribs/torque
+ rm -f "${D}"/usr/bin/mpiexec || die
+ fi
+ use static-libs || find "${ED}" -name '*.la' -exec rm {} +
+ # install sample configs
+ keepdir /etc/slurm
+ insinto /etc/slurm
+ doins \
+ etc/prolog.example \
+ etc/cgroup.conf.example \
+ etc/slurm.conf.example \
+ etc/slurmdbd.conf.example
+ exeinto /etc/slurm
+ keepdir /etc/slurm/layouts.d
+ insinto /etc/slurm/layouts.d
+ newins etc/layouts.d.power.conf.example power.conf.example
+ newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
+ newins etc/layouts.d.unit.conf.example unit.conf.example
+ # install init.d files
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
+ # install conf.d files
+ newconfd "${FILESDIR}/slurm.confd" slurm
+ # install logrotate file
+ insinto /etc/logrotate.d
+ newins "${FILESDIR}/logrotate" slurm
+ # install bashcomp
+ newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
+ bashcomp_alias scontrol \
+ sreport sacctmgr squeue scancel sshare sbcast sinfo \
+ sprio sacct salloc sbatch srun sattach sdiag sstat
+ # install systemd files
+ systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
+ systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
+}
+
+pkg_preinst() {
+ if use munge; then
+ sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
+ fi
+}
+
+create_folders_and_fix_permissions() {
+ einfo "Fixing permissions in ${@}"
+ mkdir -p ${@} || die
+ chown -R ${PN}:${PN} ${@} || die
+}
+
+pkg_postinst() {
+ paths=(
+ "${EROOT}"/var/${PN}/checkpoint
+ "${EROOT}"/var/${PN}
+ "${EROOT}"/var/spool/${PN}/slurmd
+ "${EROOT}"/var/spool/${PN}
+ "${EROOT}"/var/log/${PN}
+ /var/tmp/${PN}/${PN}d
+ /var/tmp/${PN}
+ /run/${PN}
+ )
+ local folder_path
+ for folder_path in ${paths[@]}; do
+ create_folders_and_fix_permissions $folder_path
+ done
+ echo
+
+ elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
+ elog "through a (javascript enabled) browser to create a configureation file."
+ elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
+ echo
+ elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
+ elog "Your kernel must be compiled with the wanted cgroup feature:"
+ elog " For the proctrack plugin:"
+ elog " freezer"
+ elog " For the task plugin:"
+ elog " cpuset, memory, devices"
+ elog " For the accounting plugin:"
+ elog " cpuacct, memory, blkio"
+ elog "Then, set these options in /etc/slurm/slurm.conf:"
+ elog " ProctrackType=proctrack/cgroup"
+ elog " TaskPlugin=task/cgroup"
+ einfo
+ ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
+ for folder_path in ${paths[@]}; do
+ ewarn " ${folder_path}"
+ done
+}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2020-03-27 13:30 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2020-03-27 13:30 UTC (permalink / raw
To: gentoo-commits
commit: ffedf7eae799fd5c529083ba313d9924fe09ec01
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Fri Mar 27 13:30:05 2020 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Fri Mar 27 13:30:17 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ffedf7ea
sys-cluster/slurm: Version bump (v20.02.1.1)
Package-Manager: Portage-2.3.89, Repoman-2.3.20
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/Manifest | 1 +
sys-cluster/slurm/slurm-20.02.1.1.ebuild | 263 +++++++++++++++++++++++++++++++
2 files changed, 264 insertions(+)
diff --git a/sys-cluster/slurm/Manifest b/sys-cluster/slurm/Manifest
index 156435a049b..91e8bb4d295 100644
--- a/sys-cluster/slurm/Manifest
+++ b/sys-cluster/slurm/Manifest
@@ -1,3 +1,4 @@
DIST slurm-19-05-4-1.tar.gz 8446001 BLAKE2B d3b1524a72d7969b14788b93c7d64b03faf159b71b1ed8fb30782980b7b39e9f4a1d1435f4fbdce722ed9585e7d3285f9a84322c5a5d2f44d5e084bb38019ae4 SHA512 ecee26b23fc72ea4b6eb3039aada1814b5932d75eaf61501a31b97ac8f7b600864f2429a36de068f1f1cde178fa1383f2c53192af5b1a62766e3ffe48be4395c
DIST slurm-19-05-5-1.tar.gz 8447611 BLAKE2B 052d6a9c7e196546a2a7ca0c8e324d3728177e06a6b82150d6888cf5f6aa4b0f6612e09e928b2224be412971b4e40318d3b03e27068ed7c2256036a417ebf9c5 SHA512 612ce1c476de3d08d4003c48df65883880e697652ef8b0847cd87719e91196f489409b27c67ef040ab9ffe0c9d824cdae6441608e9af9619abcf11ebf0d464be
DIST slurm-20-02-0-1.tar.gz 8657581 BLAKE2B 402bb9c9a87055940ca525eb5c5e37cb62ad8957ae626682109e885834e6e17e93e3964f65b66c17c5ecc611271bd19709290f7ab79398c8c6b5aa762e476b50 SHA512 2c27133c8598cbb4ad0e6d186732f83cfb1b12460fddd89646b41a4d7c8239afff795db22345216f76ba5b666f1d5c2642dcfcbf38285f66d748424b60f9598a
+DIST slurm-20-02-1-1.tar.gz 8660993 BLAKE2B 8f3a6ce0177410ae25490bb995fc14696002a22a8a0ec82d97f697fe5898c8c7d07fe2ad4ab824e1056f3be59adb2cb30b3e89a50a529e786a59aacab5cc6673 SHA512 a0974f52a561dc7596a9a7aeea4f09075a97dc30c729e59aef625584264e5b4ae003466275be379bae42a2a0e0be0c910b9349d3e7c6631f18969518ac9a0910
diff --git a/sys-cluster/slurm/slurm-20.02.1.1.ebuild b/sys-cluster/slurm/slurm-20.02.1.1.ebuild
new file mode 100644
index 00000000000..a2a4e4bd829
--- /dev/null
+++ b/sys-cluster/slurm/slurm-20.02.1.1.ebuild
@@ -0,0 +1,263 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+if [[ ${PV} == *9999* ]]; then
+ EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
+ INHERIT_GIT="git-r3"
+ MY_P="${P}"
+else
+ if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
+ MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
+ else
+ MY_PV=$(ver_rs 1-3 '-') # stable releases
+ fi
+ MY_P="${PN}-${MY_PV}"
+ INHERIT_GIT=""
+ SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
+ KEYWORDS="~amd64 ~x86"
+fi
+
+inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
+
+DESCRIPTION="A Highly Scalable Resource Manager"
+HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
+
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
+
+COMMON_DEPEND="
+ !sys-cluster/torque
+ !net-analyzer/slurm
+ !net-analyzer/sinfo
+ || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
+ mysql? (
+ || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
+ slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
+ )
+ munge? ( sys-auth/munge )
+ pam? ( sys-libs/pam )
+ lua? ( dev-lang/lua:0= )
+ !lua? ( !dev-lang/lua )
+ ipmi? ( sys-libs/freeipmi )
+ json? ( dev-libs/json-c:= )
+ amd64? ( netloc? ( sys-apps/netloc ) )
+ hdf5? ( sci-libs/hdf5:= )
+ numa? ( sys-process/numactl )
+ ofed? ( sys-fabric/ofed )
+ ucx? ( sys-cluster/ucx )
+ X? ( net-libs/libssh2 )
+ >=sys-apps/hwloc-1.1.1-r1
+ sys-libs/ncurses:0=
+ app-arch/lz4:0=
+ sys-libs/readline:0="
+DEPEND="${COMMON_DEPEND}
+ html? ( sys-apps/man2html )"
+RDEPEND="${OMMON_DEPEND}
+ acct-user/slurm
+ acct-group/slurm
+ dev-libs/libcgroup"
+
+REQUIRED_USE="torque? ( perl )"
+
+S="${WORKDIR}/${PN}-${MY_P}"
+
+LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
+LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
+
+RESTRICT="test"
+
+src_unpack() {
+ if [[ ${PV} == *9999* ]]; then
+ git-r3_src_unpack
+ else
+ default
+ fi
+}
+
+src_prepare() {
+ tc-ld-disable-gold
+ default
+
+ # pids should go to /var/run/slurm
+ sed \
+ -e 's:/tmp:/var/tmp:g' \
+ -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
+ -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
+ -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
+ -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
+ -i "${S}/etc/slurm.conf.example" \
+ || die "Can't sed for /var/run/slurmctld.pid"
+ sed \
+ -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
+ -i "${S}/etc/slurmdbd.conf.example" \
+ || die "Can't sed for /var/run/slurmdbd.pid"
+ # gentooify systemd services
+ sed \
+ -e 's:sysconfig/.*:conf.d/slurm:g' \
+ -e 's:var/run/:run/slurm/:g' \
+ -e '/^EnvironmentFile=.*/d' \
+ -i "${S}/etc"/*.service.in \
+ || die "Can't sed systemd services for sysconfig or var/run/"
+
+ sed -e '/AM_PATH_GTK_2_0/d' -i configure.ac || die
+
+ hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
+ eautoreconf
+}
+
+src_configure() {
+ local myconf=(
+ --sysconfdir="${EPREFIX}/etc/${PN}"
+ --with-hwloc="${EPREFIX}/usr"
+ --htmldir="${EPREFIX}/usr/share/doc/${PF}"
+ )
+ use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
+ use mysql || myconf+=( --without-mysql_config )
+ use amd64 && myconf+=( $(use_with netloc) )
+ econf "${myconf[@]}" \
+ $(use_enable debug) \
+ $(use_enable pam) \
+ $(use_enable X x11) \
+ $(use_with munge) \
+ $(use_with json) \
+ $(use_with hdf5) \
+ $(use_with ofed) \
+ $(use_with ucx) \
+ $(use_enable static-libs static) \
+ $(use_enable multiple-slurmd)
+
+ # --htmldir does not seems to propagate... Documentations are installed
+ # in /usr/share/doc/slurm-2.3.0/html
+ # instead of /usr/share/doc/slurm-2.3.0.2/html
+ sed \
+ -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
+ -i doc/html/Makefile || die
+ if use perl ; then
+ # small hack to make it compile
+ mkdir -p "${S}/src/api/.libs" || die
+ mkdir -p "${S}/src/db_api/.libs" || die
+ touch "${S}/src/api/.libs/libslurm.so" || die
+ touch "${S}/src/db_api/.libs/libslurmdb.so" || die
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${S}" || die
+ rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
+ fi
+}
+
+src_compile() {
+ default
+ use pam && emake -C contribs/pam
+ if use perl ; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_compile
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
+ cd "${S}" || die
+ fi
+ use torque && emake -C contribs/torque
+}
+
+src_install() {
+ default
+ use pam && emake DESTDIR="${D}" -C contribs/pam install
+ if use perl; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_install
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_install
+ cd "${S}" || die
+ fi
+ if use torque; then
+ emake DESTDIR="${D}" -C contribs/torque
+ rm -f "${D}"/usr/bin/mpiexec || die
+ fi
+ use static-libs || find "${ED}" -name '*.la' -exec rm {} +
+ # install sample configs
+ keepdir /etc/slurm
+ insinto /etc/slurm
+ doins \
+ etc/prolog.example \
+ etc/cgroup.conf.example \
+ etc/slurm.conf.example \
+ etc/slurmdbd.conf.example
+ exeinto /etc/slurm
+ keepdir /etc/slurm/layouts.d
+ insinto /etc/slurm/layouts.d
+ newins etc/layouts.d.power.conf.example power.conf.example
+ newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
+ newins etc/layouts.d.unit.conf.example unit.conf.example
+ # install init.d files
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
+ # install conf.d files
+ newconfd "${FILESDIR}/slurm.confd" slurm
+ # install logrotate file
+ insinto /etc/logrotate.d
+ newins "${FILESDIR}/logrotate" slurm
+ # install bashcomp
+ newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
+ bashcomp_alias scontrol \
+ sreport sacctmgr squeue scancel sshare sbcast sinfo \
+ sprio sacct salloc sbatch srun sattach sdiag sstat
+ # install systemd files
+ systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
+ systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
+}
+
+pkg_preinst() {
+ if use munge; then
+ sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
+ fi
+}
+
+create_folders_and_fix_permissions() {
+ einfo "Fixing permissions in ${@}"
+ mkdir -p ${@} || die
+ chown -R ${PN}:${PN} ${@} || die
+}
+
+pkg_postinst() {
+ paths=(
+ "${EROOT}"/var/${PN}/checkpoint
+ "${EROOT}"/var/${PN}
+ "${EROOT}"/var/spool/${PN}/slurmd
+ "${EROOT}"/var/spool/${PN}
+ "${EROOT}"/var/log/${PN}
+ /var/tmp/${PN}/${PN}d
+ /var/tmp/${PN}
+ /run/${PN}
+ )
+ local folder_path
+ for folder_path in ${paths[@]}; do
+ create_folders_and_fix_permissions $folder_path
+ done
+ echo
+
+ elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
+ elog "through a (javascript enabled) browser to create a configureation file."
+ elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
+ echo
+ elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
+ elog "Your kernel must be compiled with the wanted cgroup feature:"
+ elog " For the proctrack plugin:"
+ elog " freezer"
+ elog " For the task plugin:"
+ elog " cpuset, memory, devices"
+ elog " For the accounting plugin:"
+ elog " cpuacct, memory, blkio"
+ elog "Then, set these options in /etc/slurm/slurm.conf:"
+ elog " ProctrackType=proctrack/cgroup"
+ elog " TaskPlugin=task/cgroup"
+ einfo
+ ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
+ for folder_path in ${paths[@]}; do
+ ewarn " ${folder_path}"
+ done
+}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2020-03-27 13:23 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2020-03-27 13:23 UTC (permalink / raw
To: gentoo-commits
commit: 7eed44a5fe19fb7240415eeb49700079a0313e6b
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Fri Mar 27 13:18:55 2020 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Fri Mar 27 13:23:34 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=7eed44a5
sys-cluster/slurm: drop gtk macro defenition
Package-Manager: Portage-2.3.89, Repoman-2.3.20
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/slurm-20.02.0.1.ebuild | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sys-cluster/slurm/slurm-20.02.0.1.ebuild b/sys-cluster/slurm/slurm-20.02.0.1.ebuild
index 10e2d81f7ef..a2a4e4bd829 100644
--- a/sys-cluster/slurm/slurm-20.02.0.1.ebuild
+++ b/sys-cluster/slurm/slurm-20.02.0.1.ebuild
@@ -102,6 +102,8 @@ src_prepare() {
-i "${S}/etc"/*.service.in \
|| die "Can't sed systemd services for sysconfig or var/run/"
+ sed -e '/AM_PATH_GTK_2_0/d' -i configure.ac || die
+
hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
eautoreconf
}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2020-02-29 13:00 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2020-02-29 13:00 UTC (permalink / raw
To: gentoo-commits
commit: 3ee03f951945af53592a94c3ff9ff900e2e9095c
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sat Feb 29 12:59:07 2020 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sat Feb 29 13:00:03 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=3ee03f95
sys-cluster/slurm: Version bump (v20.02.0.1)
Package-Manager: Portage-2.3.84, Repoman-2.3.20
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/Manifest | 1 +
sys-cluster/slurm/slurm-20.02.0.1.ebuild | 261 +++++++++++++++++++++++++++++++
2 files changed, 262 insertions(+)
diff --git a/sys-cluster/slurm/Manifest b/sys-cluster/slurm/Manifest
index 8bb13bbfd2a..156435a049b 100644
--- a/sys-cluster/slurm/Manifest
+++ b/sys-cluster/slurm/Manifest
@@ -1,2 +1,3 @@
DIST slurm-19-05-4-1.tar.gz 8446001 BLAKE2B d3b1524a72d7969b14788b93c7d64b03faf159b71b1ed8fb30782980b7b39e9f4a1d1435f4fbdce722ed9585e7d3285f9a84322c5a5d2f44d5e084bb38019ae4 SHA512 ecee26b23fc72ea4b6eb3039aada1814b5932d75eaf61501a31b97ac8f7b600864f2429a36de068f1f1cde178fa1383f2c53192af5b1a62766e3ffe48be4395c
DIST slurm-19-05-5-1.tar.gz 8447611 BLAKE2B 052d6a9c7e196546a2a7ca0c8e324d3728177e06a6b82150d6888cf5f6aa4b0f6612e09e928b2224be412971b4e40318d3b03e27068ed7c2256036a417ebf9c5 SHA512 612ce1c476de3d08d4003c48df65883880e697652ef8b0847cd87719e91196f489409b27c67ef040ab9ffe0c9d824cdae6441608e9af9619abcf11ebf0d464be
+DIST slurm-20-02-0-1.tar.gz 8657581 BLAKE2B 402bb9c9a87055940ca525eb5c5e37cb62ad8957ae626682109e885834e6e17e93e3964f65b66c17c5ecc611271bd19709290f7ab79398c8c6b5aa762e476b50 SHA512 2c27133c8598cbb4ad0e6d186732f83cfb1b12460fddd89646b41a4d7c8239afff795db22345216f76ba5b666f1d5c2642dcfcbf38285f66d748424b60f9598a
diff --git a/sys-cluster/slurm/slurm-20.02.0.1.ebuild b/sys-cluster/slurm/slurm-20.02.0.1.ebuild
new file mode 100644
index 00000000000..10e2d81f7ef
--- /dev/null
+++ b/sys-cluster/slurm/slurm-20.02.0.1.ebuild
@@ -0,0 +1,261 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+if [[ ${PV} == *9999* ]]; then
+ EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
+ INHERIT_GIT="git-r3"
+ MY_P="${P}"
+else
+ if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
+ MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
+ else
+ MY_PV=$(ver_rs 1-3 '-') # stable releases
+ fi
+ MY_P="${PN}-${MY_PV}"
+ INHERIT_GIT=""
+ SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
+ KEYWORDS="~amd64 ~x86"
+fi
+
+inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
+
+DESCRIPTION="A Highly Scalable Resource Manager"
+HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
+
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
+
+COMMON_DEPEND="
+ !sys-cluster/torque
+ !net-analyzer/slurm
+ !net-analyzer/sinfo
+ || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
+ mysql? (
+ || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
+ slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
+ )
+ munge? ( sys-auth/munge )
+ pam? ( sys-libs/pam )
+ lua? ( dev-lang/lua:0= )
+ !lua? ( !dev-lang/lua )
+ ipmi? ( sys-libs/freeipmi )
+ json? ( dev-libs/json-c:= )
+ amd64? ( netloc? ( sys-apps/netloc ) )
+ hdf5? ( sci-libs/hdf5:= )
+ numa? ( sys-process/numactl )
+ ofed? ( sys-fabric/ofed )
+ ucx? ( sys-cluster/ucx )
+ X? ( net-libs/libssh2 )
+ >=sys-apps/hwloc-1.1.1-r1
+ sys-libs/ncurses:0=
+ app-arch/lz4:0=
+ sys-libs/readline:0="
+DEPEND="${COMMON_DEPEND}
+ html? ( sys-apps/man2html )"
+RDEPEND="${OMMON_DEPEND}
+ acct-user/slurm
+ acct-group/slurm
+ dev-libs/libcgroup"
+
+REQUIRED_USE="torque? ( perl )"
+
+S="${WORKDIR}/${PN}-${MY_P}"
+
+LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
+LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
+
+RESTRICT="test"
+
+src_unpack() {
+ if [[ ${PV} == *9999* ]]; then
+ git-r3_src_unpack
+ else
+ default
+ fi
+}
+
+src_prepare() {
+ tc-ld-disable-gold
+ default
+
+ # pids should go to /var/run/slurm
+ sed \
+ -e 's:/tmp:/var/tmp:g' \
+ -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
+ -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
+ -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
+ -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
+ -i "${S}/etc/slurm.conf.example" \
+ || die "Can't sed for /var/run/slurmctld.pid"
+ sed \
+ -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
+ -i "${S}/etc/slurmdbd.conf.example" \
+ || die "Can't sed for /var/run/slurmdbd.pid"
+ # gentooify systemd services
+ sed \
+ -e 's:sysconfig/.*:conf.d/slurm:g' \
+ -e 's:var/run/:run/slurm/:g' \
+ -e '/^EnvironmentFile=.*/d' \
+ -i "${S}/etc"/*.service.in \
+ || die "Can't sed systemd services for sysconfig or var/run/"
+
+ hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
+ eautoreconf
+}
+
+src_configure() {
+ local myconf=(
+ --sysconfdir="${EPREFIX}/etc/${PN}"
+ --with-hwloc="${EPREFIX}/usr"
+ --htmldir="${EPREFIX}/usr/share/doc/${PF}"
+ )
+ use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
+ use mysql || myconf+=( --without-mysql_config )
+ use amd64 && myconf+=( $(use_with netloc) )
+ econf "${myconf[@]}" \
+ $(use_enable debug) \
+ $(use_enable pam) \
+ $(use_enable X x11) \
+ $(use_with munge) \
+ $(use_with json) \
+ $(use_with hdf5) \
+ $(use_with ofed) \
+ $(use_with ucx) \
+ $(use_enable static-libs static) \
+ $(use_enable multiple-slurmd)
+
+ # --htmldir does not seems to propagate... Documentations are installed
+ # in /usr/share/doc/slurm-2.3.0/html
+ # instead of /usr/share/doc/slurm-2.3.0.2/html
+ sed \
+ -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
+ -i doc/html/Makefile || die
+ if use perl ; then
+ # small hack to make it compile
+ mkdir -p "${S}/src/api/.libs" || die
+ mkdir -p "${S}/src/db_api/.libs" || die
+ touch "${S}/src/api/.libs/libslurm.so" || die
+ touch "${S}/src/db_api/.libs/libslurmdb.so" || die
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${S}" || die
+ rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
+ fi
+}
+
+src_compile() {
+ default
+ use pam && emake -C contribs/pam
+ if use perl ; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_compile
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
+ cd "${S}" || die
+ fi
+ use torque && emake -C contribs/torque
+}
+
+src_install() {
+ default
+ use pam && emake DESTDIR="${D}" -C contribs/pam install
+ if use perl; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_install
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_install
+ cd "${S}" || die
+ fi
+ if use torque; then
+ emake DESTDIR="${D}" -C contribs/torque
+ rm -f "${D}"/usr/bin/mpiexec || die
+ fi
+ use static-libs || find "${ED}" -name '*.la' -exec rm {} +
+ # install sample configs
+ keepdir /etc/slurm
+ insinto /etc/slurm
+ doins \
+ etc/prolog.example \
+ etc/cgroup.conf.example \
+ etc/slurm.conf.example \
+ etc/slurmdbd.conf.example
+ exeinto /etc/slurm
+ keepdir /etc/slurm/layouts.d
+ insinto /etc/slurm/layouts.d
+ newins etc/layouts.d.power.conf.example power.conf.example
+ newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
+ newins etc/layouts.d.unit.conf.example unit.conf.example
+ # install init.d files
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
+ # install conf.d files
+ newconfd "${FILESDIR}/slurm.confd" slurm
+ # install logrotate file
+ insinto /etc/logrotate.d
+ newins "${FILESDIR}/logrotate" slurm
+ # install bashcomp
+ newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
+ bashcomp_alias scontrol \
+ sreport sacctmgr squeue scancel sshare sbcast sinfo \
+ sprio sacct salloc sbatch srun sattach sdiag sstat
+ # install systemd files
+ systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
+ systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
+}
+
+pkg_preinst() {
+ if use munge; then
+ sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
+ fi
+}
+
+create_folders_and_fix_permissions() {
+ einfo "Fixing permissions in ${@}"
+ mkdir -p ${@} || die
+ chown -R ${PN}:${PN} ${@} || die
+}
+
+pkg_postinst() {
+ paths=(
+ "${EROOT}"/var/${PN}/checkpoint
+ "${EROOT}"/var/${PN}
+ "${EROOT}"/var/spool/${PN}/slurmd
+ "${EROOT}"/var/spool/${PN}
+ "${EROOT}"/var/log/${PN}
+ /var/tmp/${PN}/${PN}d
+ /var/tmp/${PN}
+ /run/${PN}
+ )
+ local folder_path
+ for folder_path in ${paths[@]}; do
+ create_folders_and_fix_permissions $folder_path
+ done
+ echo
+
+ elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
+ elog "through a (javascript enabled) browser to create a configureation file."
+ elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
+ echo
+ elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
+ elog "Your kernel must be compiled with the wanted cgroup feature:"
+ elog " For the proctrack plugin:"
+ elog " freezer"
+ elog " For the task plugin:"
+ elog " cpuset, memory, devices"
+ elog " For the accounting plugin:"
+ elog " cpuacct, memory, blkio"
+ elog "Then, set these options in /etc/slurm/slurm.conf:"
+ elog " ProctrackType=proctrack/cgroup"
+ elog " TaskPlugin=task/cgroup"
+ einfo
+ ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
+ for folder_path in ${paths[@]}; do
+ ewarn " ${folder_path}"
+ done
+}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2019-12-21 11:11 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2019-12-21 11:11 UTC (permalink / raw
To: gentoo-commits
commit: d4966c52c31b513eeffefc9de66405e792172e34
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sat Dec 21 11:11:19 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sat Dec 21 11:11:19 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d4966c52
sys-cluster/slurm: drop double autoreconf call
Package-Manager: Portage-2.3.79, Repoman-2.3.16
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/slurm-19.05.4.1.ebuild | 1 -
sys-cluster/slurm/slurm-19.05.5.1.ebuild | 1 -
2 files changed, 2 deletions(-)
diff --git a/sys-cluster/slurm/slurm-19.05.4.1.ebuild b/sys-cluster/slurm/slurm-19.05.4.1.ebuild
index 6cadf68379e..f9a659b1dc9 100644
--- a/sys-cluster/slurm/slurm-19.05.4.1.ebuild
+++ b/sys-cluster/slurm/slurm-19.05.4.1.ebuild
@@ -82,7 +82,6 @@ src_unpack() {
src_prepare() {
tc-ld-disable-gold
eapply "${FILESDIR}"/disable-sview.patch
- eautoreconf
default
# pids should go to /var/run/slurm
diff --git a/sys-cluster/slurm/slurm-19.05.5.1.ebuild b/sys-cluster/slurm/slurm-19.05.5.1.ebuild
index 925771131f4..c7cb6c9ce41 100644
--- a/sys-cluster/slurm/slurm-19.05.5.1.ebuild
+++ b/sys-cluster/slurm/slurm-19.05.5.1.ebuild
@@ -82,7 +82,6 @@ src_unpack() {
src_prepare() {
tc-ld-disable-gold
eapply "${FILESDIR}"/disable-sview.patch
- eautoreconf
default
# pids should go to /var/run/slurm
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2019-12-21 9:46 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2019-12-21 9:46 UTC (permalink / raw
To: gentoo-commits
commit: b8a6f13c309753c80dfb15688cc900c825c2fb24
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sat Dec 21 09:46:27 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sat Dec 21 09:46:41 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=b8a6f13c
sys-cluster/slurm: Version bump (v19.05.5.1)
Package-Manager: Portage-2.3.79, Repoman-2.3.16
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/Manifest | 1 +
sys-cluster/slurm/slurm-19.05.5.1.ebuild | 266 +++++++++++++++++++++++++++++++
2 files changed, 267 insertions(+)
diff --git a/sys-cluster/slurm/Manifest b/sys-cluster/slurm/Manifest
index acf204239f1..8bb13bbfd2a 100644
--- a/sys-cluster/slurm/Manifest
+++ b/sys-cluster/slurm/Manifest
@@ -1 +1,2 @@
DIST slurm-19-05-4-1.tar.gz 8446001 BLAKE2B d3b1524a72d7969b14788b93c7d64b03faf159b71b1ed8fb30782980b7b39e9f4a1d1435f4fbdce722ed9585e7d3285f9a84322c5a5d2f44d5e084bb38019ae4 SHA512 ecee26b23fc72ea4b6eb3039aada1814b5932d75eaf61501a31b97ac8f7b600864f2429a36de068f1f1cde178fa1383f2c53192af5b1a62766e3ffe48be4395c
+DIST slurm-19-05-5-1.tar.gz 8447611 BLAKE2B 052d6a9c7e196546a2a7ca0c8e324d3728177e06a6b82150d6888cf5f6aa4b0f6612e09e928b2224be412971b4e40318d3b03e27068ed7c2256036a417ebf9c5 SHA512 612ce1c476de3d08d4003c48df65883880e697652ef8b0847cd87719e91196f489409b27c67ef040ab9ffe0c9d824cdae6441608e9af9619abcf11ebf0d464be
diff --git a/sys-cluster/slurm/slurm-19.05.5.1.ebuild b/sys-cluster/slurm/slurm-19.05.5.1.ebuild
new file mode 100644
index 00000000000..925771131f4
--- /dev/null
+++ b/sys-cluster/slurm/slurm-19.05.5.1.ebuild
@@ -0,0 +1,266 @@
+# Copyright 1999-2019 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+if [[ ${PV} == *9999* ]]; then
+ EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
+ INHERIT_GIT="git-r3"
+ SRC_URI=""
+ KEYWORDS=""
+ MY_P="${P}"
+else
+ if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
+ MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
+ else
+ MY_PV=$(ver_rs 1-3 '-') # stable releases
+ fi
+ MY_P="${PN}-${MY_PV}"
+ INHERIT_GIT=""
+ SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
+ KEYWORDS="~amd64 ~x86"
+fi
+
+inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
+
+DESCRIPTION="A Highly Scalable Resource Manager"
+HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
+
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
+
+COMMON_DEPEND="
+ !sys-cluster/torque
+ !net-analyzer/slurm
+ !net-analyzer/sinfo
+ || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
+ mysql? (
+ || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
+ slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
+ )
+ munge? ( sys-auth/munge )
+ pam? ( sys-libs/pam )
+ lua? ( dev-lang/lua:0= )
+ !lua? ( !dev-lang/lua )
+ ipmi? ( sys-libs/freeipmi )
+ json? ( dev-libs/json-c:= )
+ amd64? ( netloc? ( sys-apps/netloc ) )
+ hdf5? ( sci-libs/hdf5:= )
+ numa? ( sys-process/numactl )
+ ofed? ( sys-fabric/ofed )
+ ucx? ( sys-cluster/ucx )
+ X? ( net-libs/libssh2 )
+ >=sys-apps/hwloc-1.1.1-r1
+ sys-libs/ncurses:0=
+ app-arch/lz4:0=
+ sys-libs/readline:0="
+DEPEND="${COMMON_DEPEND}
+ html? ( sys-apps/man2html )"
+RDEPEND="${OMMON_DEPEND}
+ acct-user/slurm
+ acct-group/slurm
+ dev-libs/libcgroup"
+
+REQUIRED_USE="torque? ( perl )"
+
+S="${WORKDIR}/${PN}-${MY_P}"
+
+LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
+LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
+
+RESTRICT="test"
+
+src_unpack() {
+ if [[ ${PV} == *9999* ]]; then
+ git-r3_src_unpack
+ else
+ default
+ fi
+}
+
+src_prepare() {
+ tc-ld-disable-gold
+ eapply "${FILESDIR}"/disable-sview.patch
+ eautoreconf
+ default
+
+ # pids should go to /var/run/slurm
+ sed \
+ -e 's:/tmp:/var/tmp:g' \
+ -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
+ -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
+ -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
+ -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
+ -i "${S}/etc/slurm.conf.example" \
+ || die "Can't sed for /var/run/slurmctld.pid"
+ sed \
+ -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
+ -i "${S}/etc/slurmdbd.conf.example" \
+ || die "Can't sed for /var/run/slurmdbd.pid"
+ # gentooify systemd services
+ sed \
+ -e 's:sysconfig/.*:conf.d/slurm:g' \
+ -e 's:var/run/:run/slurm/:g' \
+ -e '/^EnvironmentFile=.*/d' \
+ -i "${S}/etc"/*.service.in \
+ || die "Can't sed systemd services for sysconfig or var/run/"
+
+ hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
+ eautoreconf
+}
+
+src_configure() {
+ local myconf=(
+ --sysconfdir="${EPREFIX}/etc/${PN}"
+ --with-hwloc="${EPREFIX}/usr"
+ --docdir="${EPREFIX}/usr/share/doc/${P}"
+ --htmldir="${EPREFIX}/usr/share/doc/${P}"
+ )
+ use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
+ use mysql || myconf+=( --without-mysql_config )
+ use amd64 && myconf+=( $(use_with netloc) )
+ econf "${myconf[@]}" \
+ $(use_enable debug) \
+ $(use_enable pam) \
+ $(use_enable X x11) \
+ $(use_with munge) \
+ $(use_with json) \
+ $(use_with hdf5) \
+ $(use_with ofed) \
+ $(use_with ucx) \
+ $(use_enable static-libs static) \
+ $(use_enable multiple-slurmd)
+
+ # --htmldir does not seems to propagate... Documentations are installed
+ # in /usr/share/doc/slurm-2.3.0/html
+ # instead of /usr/share/doc/slurm-2.3.0.2/html
+ sed \
+ -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
+ -i doc/html/Makefile || die
+ if use perl ; then
+ # small hack to make it compile
+ mkdir -p "${S}/src/api/.libs" || die
+ mkdir -p "${S}/src/db_api/.libs" || die
+ touch "${S}/src/api/.libs/libslurm.so" || die
+ touch "${S}/src/db_api/.libs/libslurmdb.so" || die
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${S}" || die
+ rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
+ fi
+}
+
+src_compile() {
+ default
+ use pam && emake -C contribs/pam
+ if use perl ; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_compile
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
+ cd "${S}" || die
+ fi
+ use torque && emake -C contribs/torque
+}
+
+src_install() {
+ default
+ use pam && emake DESTDIR="${D}" -C contribs/pam install
+ if use perl; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_install
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_install
+ cd "${S}" || die
+ fi
+ if use torque; then
+ emake DESTDIR="${D}" -C contribs/torque
+ rm -f "${D}"/usr/bin/mpiexec || die
+ fi
+ use static-libs || find "${ED}" -name '*.la' -exec rm {} +
+ # install sample configs
+ keepdir /etc/slurm
+ insinto /etc/slurm
+ doins \
+ etc/prolog.example \
+ etc/cgroup.conf.example \
+ etc/slurm.conf.example \
+ etc/slurmdbd.conf.example
+ exeinto /etc/slurm
+ keepdir /etc/slurm/layouts.d
+ insinto /etc/slurm/layouts.d
+ newins etc/layouts.d.power.conf.example power.conf.example
+ newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
+ newins etc/layouts.d.unit.conf.example unit.conf.example
+ # install init.d files
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
+ # install conf.d files
+ newconfd "${FILESDIR}/slurm.confd" slurm
+ # install logrotate file
+ insinto /etc/logrotate.d
+ newins "${FILESDIR}/logrotate" slurm
+ # install bashcomp
+ newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
+ bashcomp_alias scontrol \
+ sreport sacctmgr squeue scancel sshare sbcast sinfo \
+ sprio sacct salloc sbatch srun sattach sdiag sstat
+ # install systemd files
+ systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
+ systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
+}
+
+pkg_preinst() {
+ if use munge; then
+ sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
+ fi
+}
+
+create_folders_and_fix_permissions() {
+ einfo "Fixing permissions in ${@}"
+ mkdir -p ${@} || die
+ chown -R ${PN}:${PN} ${@} || die
+}
+
+pkg_postinst() {
+ paths=(
+ "${EROOT}"/var/${PN}/checkpoint
+ "${EROOT}"/var/${PN}
+ "${EROOT}"/var/spool/${PN}/slurmd
+ "${EROOT}"/var/spool/${PN}
+ "${EROOT}"/var/log/${PN}
+ /var/tmp/${PN}/${PN}d
+ /var/tmp/${PN}
+ /run/${PN}
+ )
+ local folder_path
+ for folder_path in ${paths[@]}; do
+ create_folders_and_fix_permissions $folder_path
+ done
+ echo
+
+ elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
+ elog "through a (javascript enabled) browser to create a configureation file."
+ elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
+ echo
+ elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
+ elog "Your kernel must be compiled with the wanted cgroup feature:"
+ elog " For the proctrack plugin:"
+ elog " freezer"
+ elog " For the task plugin:"
+ elog " cpuset, memory, devices"
+ elog " For the accounting plugin:"
+ elog " cpuacct, memory, blkio"
+ elog "Then, set these options in /etc/slurm/slurm.conf:"
+ elog " ProctrackType=proctrack/cgroup"
+ elog " TaskPlugin=task/cgroup"
+ einfo
+ ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
+ for folder_path in ${paths[@]}; do
+ ewarn " ${folder_path}"
+ done
+}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2019-12-21 9:05 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2019-12-21 9:05 UTC (permalink / raw
To: gentoo-commits
commit: c5dea14eb42fb2e259e14910bd213c7fbfbc83ff
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sat Dec 21 09:05:25 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sat Dec 21 09:05:25 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c5dea14e
sys-cluster/slurm: change source dir for correct perl support
Package-Manager: Portage-2.3.79, Repoman-2.3.16
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/slurm-19.05.4.1.ebuild | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-cluster/slurm/slurm-19.05.4.1.ebuild b/sys-cluster/slurm/slurm-19.05.4.1.ebuild
index 4ebfbf7e9f1..b2750515b35 100644
--- a/sys-cluster/slurm/slurm-19.05.4.1.ebuild
+++ b/sys-cluster/slurm/slurm-19.05.4.1.ebuild
@@ -66,8 +66,8 @@ REQUIRED_USE="torque? ( perl )"
S="${WORKDIR}/${PN}-${MY_P}"
-LIBSLURM_PERL_S="${WORKDIR}/${MY_P}/contribs/perlapi/libslurm/perl"
-LIBSLURMDB_PERL_S="${WORKDIR}/${MY_P}/contribs/perlapi/libslurmdb/perl"
+LIBSLURM_PERL_S="${S}/contribs/perlapi/libslurm/perl"
+LIBSLURMDB_PERL_S="${S}/contribs/perlapi/libslurmdb/perl"
RESTRICT="test"
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2019-12-21 8:59 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2019-12-21 8:59 UTC (permalink / raw
To: gentoo-commits
commit: 50b3759e1d3d4ddb758c6e71da0ffcc4fc3ab9fc
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sat Dec 21 08:58:53 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sat Dec 21 08:59:19 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=50b3759e
sys-cluster/slurm: ssl plugin is gone
Package-Manager: Portage-2.3.79, Repoman-2.3.16
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/slurm-19.05.4.1.ebuild | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/sys-cluster/slurm/slurm-19.05.4.1.ebuild b/sys-cluster/slurm/slurm-19.05.4.1.ebuild
index 2bfe56a32f5..4ebfbf7e9f1 100644
--- a/sys-cluster/slurm/slurm-19.05.4.1.ebuild
+++ b/sys-cluster/slurm/slurm-19.05.4.1.ebuild
@@ -28,7 +28,7 @@ HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
LICENSE="GPL-2"
SLOT="0"
-IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd ssl static-libs ucx torque X"
+IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd static-libs ucx torque X"
COMMON_DEPEND="
!sys-cluster/torque
@@ -41,7 +41,6 @@ COMMON_DEPEND="
)
munge? ( sys-auth/munge )
pam? ( sys-libs/pam )
- ssl? ( dev-libs/openssl:0= )
lua? ( dev-lang/lua:0= )
!lua? ( !dev-lang/lua )
ipmi? ( sys-libs/freeipmi )
@@ -123,7 +122,6 @@ src_configure() {
$(use_enable debug) \
$(use_enable pam) \
$(use_enable X x11) \
- $(use_with ssl) \
$(use_with munge) \
$(use_with json) \
$(use_with hdf5) \
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2019-12-21 8:25 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2019-12-21 8:25 UTC (permalink / raw
To: gentoo-commits
commit: 5dc1e55d035989d645998f1ff84ad938564cf089
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sat Dec 21 08:25:10 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sat Dec 21 08:25:50 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=5dc1e55d
sys-cluster/slurm: Drop old
Package-Manager: Portage-2.3.79, Repoman-2.3.16
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/Manifest | 1 -
sys-cluster/slurm/slurm-19.05.3.2.ebuild | 266 -------------------------------
2 files changed, 267 deletions(-)
diff --git a/sys-cluster/slurm/Manifest b/sys-cluster/slurm/Manifest
index 2acf65263d4..acf204239f1 100644
--- a/sys-cluster/slurm/Manifest
+++ b/sys-cluster/slurm/Manifest
@@ -1,2 +1 @@
DIST slurm-19-05-4-1.tar.gz 8446001 BLAKE2B d3b1524a72d7969b14788b93c7d64b03faf159b71b1ed8fb30782980b7b39e9f4a1d1435f4fbdce722ed9585e7d3285f9a84322c5a5d2f44d5e084bb38019ae4 SHA512 ecee26b23fc72ea4b6eb3039aada1814b5932d75eaf61501a31b97ac8f7b600864f2429a36de068f1f1cde178fa1383f2c53192af5b1a62766e3ffe48be4395c
-DIST slurm-19.05.3-2.tar.bz2 6233270 BLAKE2B be59d157e99353340f9801f0adac21cfb8c3051f8d6a1bd94ad76fc05d0f83d1f933f72bf4e33b603521ec94cc859185bf56ecbcab674fcbff526164dd39d3cc SHA512 15d63f1ba693458b220ece5512210f1dba52273946809b338e33d684b9daadecd3cc77fda84c1b3bf8b03bc0fe8b8be0f429a96a1bf72a8b5c8cf169e0e1f5bb
diff --git a/sys-cluster/slurm/slurm-19.05.3.2.ebuild b/sys-cluster/slurm/slurm-19.05.3.2.ebuild
deleted file mode 100644
index 4c9d3cbf4ae..00000000000
--- a/sys-cluster/slurm/slurm-19.05.3.2.ebuild
+++ /dev/null
@@ -1,266 +0,0 @@
-# Copyright 1999-2019 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-if [[ ${PV} == *9999* ]]; then
- EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
- INHERIT_GIT="git-r3"
- SRC_URI=""
- KEYWORDS=""
- MY_P="${P}"
-else
- if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
- MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
- else
- MY_PV=$(ver_rs 3 '-') # stable releases
- fi
- MY_P="${PN}-${MY_PV}"
- INHERIT_GIT=""
- SRC_URI="https://download.schedmd.com/slurm/${MY_P}.tar.bz2"
- KEYWORDS="~amd64 ~x86"
-fi
-
-inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
-
-DESCRIPTION="A Highly Scalable Resource Manager"
-HOMEPAGE="https://www.schedmd.com"
-
-LICENSE="GPL-2"
-SLOT="0"
-IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd ssl static-libs ucx torque X"
-
-COMMON_DEPEND="
- !sys-cluster/torque
- !net-analyzer/slurm
- !net-analyzer/sinfo
- || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
- mysql? (
- || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
- slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
- )
- munge? ( sys-auth/munge )
- pam? ( sys-libs/pam )
- ssl? ( dev-libs/openssl:0= )
- lua? ( dev-lang/lua:0= )
- !lua? ( !dev-lang/lua )
- ipmi? ( sys-libs/freeipmi )
- json? ( dev-libs/json-c:= )
- amd64? ( netloc? ( sys-apps/netloc ) )
- hdf5? ( sci-libs/hdf5:= )
- numa? ( sys-process/numactl )
- ofed? ( sys-fabric/ofed )
- ucx? ( sys-cluster/ucx )
- X? ( net-libs/libssh2 )
- >=sys-apps/hwloc-1.1.1-r1
- sys-libs/ncurses:0=
- app-arch/lz4:0=
- sys-libs/readline:0="
-DEPEND="${COMMON_DEPEND}
- html? ( sys-apps/man2html )"
-RDEPEND="${OMMON_DEPEND}
- acct-user/slurm
- acct-group/slurm
- dev-libs/libcgroup"
-
-REQUIRED_USE="torque? ( perl )"
-
-S="${WORKDIR}/${MY_P}"
-
-LIBSLURM_PERL_S="${WORKDIR}/${MY_P}/contribs/perlapi/libslurm/perl"
-LIBSLURMDB_PERL_S="${WORKDIR}/${MY_P}/contribs/perlapi/libslurmdb/perl"
-
-RESTRICT="test"
-
-src_unpack() {
- if [[ ${PV} == *9999* ]]; then
- git-r3_src_unpack
- else
- default
- fi
-}
-
-src_prepare() {
- tc-ld-disable-gold
- default
-
- # pids should go to /var/run/slurm
- sed \
- -e 's:/tmp:/var/tmp:g' \
- -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
- -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
- -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
- -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
- -i "${S}/etc/slurm.conf.example" \
- || die "Can't sed for /var/run/slurmctld.pid"
- sed \
- -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
- -i "${S}/etc/slurmdbd.conf.example" \
- || die "Can't sed for /var/run/slurmdbd.pid"
- # gentooify systemd services
- sed \
- -e 's:sysconfig/.*:conf.d/slurm:g' \
- -e 's:var/run/:run/slurm/:g' \
- -e '/^EnvironmentFile=.*/d' \
- -i "${S}/etc"/*.service.in \
- || die "Can't sed systemd services for sysconfig or var/run/"
-
- hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
- eautoreconf
-}
-
-src_configure() {
- local myconf=(
- --sysconfdir="${EPREFIX}/etc/${PN}"
- --with-hwloc="${EPREFIX}/usr"
- --docdir="${EPREFIX}/usr/share/doc/${P}"
- --htmldir="${EPREFIX}/usr/share/doc/${P}"
- )
- use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
- use mysql || myconf+=( --without-mysql_config )
- use amd64 && myconf+=( $(use_with netloc) )
- econf "${myconf[@]}" \
- $(use_enable debug) \
- $(use_enable pam) \
- $(use_enable X x11) \
- $(use_with ssl) \
- $(use_with munge) \
- $(use_with json) \
- $(use_with hdf5) \
- $(use_with ofed) \
- $(use_with ucx) \
- $(use_enable static-libs static) \
- $(use_enable multiple-slurmd)
-
- # --htmldir does not seems to propagate... Documentations are installed
- # in /usr/share/doc/slurm-2.3.0/html
- # instead of /usr/share/doc/slurm-2.3.0.2/html
- sed \
- -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
- -i doc/html/Makefile || die
- if use perl ; then
- # small hack to make it compile
- mkdir -p "${S}/src/api/.libs" || die
- mkdir -p "${S}/src/db_api/.libs" || die
- touch "${S}/src/api/.libs/libslurm.so" || die
- touch "${S}/src/db_api/.libs/libslurmdb.so" || die
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${S}" || die
- rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
- fi
-}
-
-src_compile() {
- default
- use pam && emake -C contribs/pam
- if use perl ; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_compile
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
- cd "${S}" || die
- fi
- use torque && emake -C contribs/torque
-}
-
-src_install() {
- default
- use pam && emake DESTDIR="${D}" -C contribs/pam install
- if use perl; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_install
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_install
- cd "${S}" || die
- fi
- if use torque; then
- emake DESTDIR="${D}" -C contribs/torque
- rm -f "${D}"/usr/bin/mpiexec || die
- fi
- use static-libs || find "${ED}" -name '*.la' -exec rm {} +
- # install sample configs
- keepdir /etc/slurm
- insinto /etc/slurm
- doins \
- etc/bluegene.conf.example \
- etc/cgroup.conf.example \
- etc/slurm.conf.example \
- etc/slurmdbd.conf.example
- exeinto /etc/slurm
- keepdir /etc/slurm/layouts.d
- insinto /etc/slurm/layouts.d
- newins etc/layouts.d.power.conf.example power.conf.example
- newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
- newins etc/layouts.d.unit.conf.example unit.conf.example
- # install init.d files
- newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
- newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
- newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
- # install conf.d files
- newconfd "${FILESDIR}/slurm.confd" slurm
- # install logrotate file
- insinto /etc/logrotate.d
- newins "${FILESDIR}/logrotate" slurm
- # install bashcomp
- newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
- bashcomp_alias scontrol \
- sreport sacctmgr squeue scancel sshare sbcast sinfo \
- sprio sacct salloc sbatch srun sattach sdiag sstat
- # install systemd files
- systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
- systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
-}
-
-pkg_preinst() {
- if use munge; then
- sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
- fi
-}
-
-create_folders_and_fix_permissions() {
- einfo "Fixing permissions in ${@}"
- mkdir -p ${@} || die
- chown -R ${PN}:${PN} ${@} || die
-}
-
-pkg_postinst() {
- paths=(
- "${EROOT}"/var/${PN}/checkpoint
- "${EROOT}"/var/${PN}
- "${EROOT}"/var/spool/${PN}/slurmd
- "${EROOT}"/var/spool/${PN}
- "${EROOT}"/var/log/${PN}
- /var/tmp/${PN}/${PN}d
- /var/tmp/${PN}
- /run/${PN}
- )
- local folder_path
- for folder_path in ${paths[@]}; do
- create_folders_and_fix_permissions $folder_path
- done
- echo
-
- elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
- elog "through a (javascript enabled) browser to create a configureation file."
- elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
- echo
- elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
- elog "Your kernel must be compiled with the wanted cgroup feature:"
- elog " For the proctrack plugin:"
- elog " freezer"
- elog " For the task plugin:"
- elog " cpuset, memory, devices"
- elog " For the accounting plugin:"
- elog " cpuacct, memory, blkio"
- elog "Then, set these options in /etc/slurm/slurm.conf:"
- elog " ProctrackType=proctrack/cgroup"
- elog " TaskPlugin=task/cgroup"
- einfo
- ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
- for folder_path in ${paths[@]}; do
- ewarn " ${folder_path}"
- done
-}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2019-12-01 8:56 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2019-12-01 8:56 UTC (permalink / raw
To: gentoo-commits
commit: 34d7e9ffa540545006693cf8d2d48e0371428f2e
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sun Dec 1 08:56:42 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sun Dec 1 08:56:42 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=34d7e9ff
sys-cluster/slurm: Drop old
Package-Manager: Portage-2.3.79, Repoman-2.3.16
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/Manifest | 1 -
sys-cluster/slurm/slurm-18.08.7.ebuild | 271 ---------------------------------
2 files changed, 272 deletions(-)
diff --git a/sys-cluster/slurm/Manifest b/sys-cluster/slurm/Manifest
index 0f860576a6c..2acf65263d4 100644
--- a/sys-cluster/slurm/Manifest
+++ b/sys-cluster/slurm/Manifest
@@ -1,3 +1,2 @@
-DIST slurm-18.08.7.tar.bz2 6186006 BLAKE2B a5458f72cbe93bc1103c2c7f3d428ae14239cb092edad2c683e448dda35f3e108fef0d9a3a86599da6058c9c98a86dafed9a087ffe6e8d7425db9cdb879954b3 SHA512 d0047086f1b716877cc5bb39539bf96a8fd08b1851c85fd85112c6432c1ce2a0f29fc9dd8803094c8fa44d063cec5f417e6bed231b6d338934ff4b48424a5a93
DIST slurm-19-05-4-1.tar.gz 8446001 BLAKE2B d3b1524a72d7969b14788b93c7d64b03faf159b71b1ed8fb30782980b7b39e9f4a1d1435f4fbdce722ed9585e7d3285f9a84322c5a5d2f44d5e084bb38019ae4 SHA512 ecee26b23fc72ea4b6eb3039aada1814b5932d75eaf61501a31b97ac8f7b600864f2429a36de068f1f1cde178fa1383f2c53192af5b1a62766e3ffe48be4395c
DIST slurm-19.05.3-2.tar.bz2 6233270 BLAKE2B be59d157e99353340f9801f0adac21cfb8c3051f8d6a1bd94ad76fc05d0f83d1f933f72bf4e33b603521ec94cc859185bf56ecbcab674fcbff526164dd39d3cc SHA512 15d63f1ba693458b220ece5512210f1dba52273946809b338e33d684b9daadecd3cc77fda84c1b3bf8b03bc0fe8b8be0f429a96a1bf72a8b5c8cf169e0e1f5bb
diff --git a/sys-cluster/slurm/slurm-18.08.7.ebuild b/sys-cluster/slurm/slurm-18.08.7.ebuild
deleted file mode 100644
index 09991608150..00000000000
--- a/sys-cluster/slurm/slurm-18.08.7.ebuild
+++ /dev/null
@@ -1,271 +0,0 @@
-# Copyright 1999-2019 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-if [[ ${PV} == *9999* ]]; then
- EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
- INHERIT_GIT="git-r3"
- SRC_URI=""
- KEYWORDS=""
- MY_P="${P}"
-else
- inherit eapi7-ver
- if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
- MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
- else
- MY_PV=$(ver_rs 3 '-') # stable releases
- fi
- MY_P="${PN}-${MY_PV}"
- INHERIT_GIT=""
- SRC_URI="https://download.schedmd.com/slurm/${MY_P}.tar.bz2"
- KEYWORDS="~amd64 ~x86"
- S="${WORKDIR}/${MY_P}"
-fi
-
-inherit autotools bash-completion-r1 eutils pam perl-module prefix toolchain-funcs user systemd ${INHERIT_GIT}
-
-DESCRIPTION="A Highly Scalable Resource Manager"
-HOMEPAGE="https://www.schedmd.com"
-
-LICENSE="GPL-2"
-SLOT="0"
-IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd ssl static-libs torque X"
-
-CDEPEND="
- !sys-cluster/torque
- !net-analyzer/slurm
- !net-analyzer/sinfo
- || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
- mysql? (
- || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
- slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
- )
- munge? ( sys-auth/munge )
- pam? ( sys-libs/pam )
- ssl? ( dev-libs/openssl:0= )
- lua? ( dev-lang/lua:0= )
- !lua? ( !dev-lang/lua )
- ipmi? ( sys-libs/freeipmi )
- json? ( dev-libs/json-c:= )
- amd64? ( netloc? ( sys-apps/netloc ) )
- hdf5? ( sci-libs/hdf5:= )
- numa? ( sys-process/numactl )
- ofed? ( sys-fabric/ofed )
- X? ( net-libs/libssh2 )
- >=sys-apps/hwloc-1.1.1-r1
- sys-libs/ncurses:0=
- app-arch/lz4:0=
- sys-libs/readline:0="
-DEPEND="${CDEPEND}
- html? ( sys-apps/man2html )"
-RDEPEND="${CDEPEND}
- dev-libs/libcgroup"
-
-REQUIRED_USE="torque? ( perl )"
-
-LIBSLURM_PERL_S="${WORKDIR}/${MY_P}/contribs/perlapi/libslurm/perl"
-LIBSLURMDB_PERL_S="${WORKDIR}/${MY_P}/contribs/perlapi/libslurmdb/perl"
-
-RESTRICT="test"
-
-PATCHES=(
- "${FILESDIR}"/${P}-disable-sview.patch
-)
-
-src_unpack() {
- if [[ ${PV} == *9999* ]]; then
- git-r3_src_unpack
- else
- default
- fi
-}
-
-pkg_setup() {
- enewgroup slurm 500
- enewuser slurm 500 -1 /var/spool/slurm slurm
-}
-
-src_prepare() {
- tc-ld-disable-gold
- default
-
- # pids should go to /var/run/slurm
- sed \
- -e 's:/tmp:/var/tmp:g' \
- -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
- -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
- -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
- -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
- -i "${S}/etc/slurm.conf.example" \
- || die "Can't sed for /var/run/slurmctld.pid"
- sed \
- -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
- -i "${S}/etc/slurmdbd.conf.example" \
- || die "Can't sed for /var/run/slurmdbd.pid"
- # gentooify systemd services
- sed \
- -e 's:sysconfig/.*:conf.d/slurm:g' \
- -e 's:var/run/:run/slurm/:g' \
- -e '/^EnvironmentFile=.*/d' \
- -i "${S}/etc"/*.service.in \
- || die "Can't sed systemd services for sysconfig or var/run/"
-
- hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
- eautoreconf
-}
-
-src_configure() {
- local myconf=(
- --sysconfdir="${EPREFIX}/etc/${PN}"
- --with-hwloc="${EPREFIX}/usr"
- --docdir="${EPREFIX}/usr/share/doc/${P}"
- --htmldir="${EPREFIX}/usr/share/doc/${P}"
- )
- use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
- use mysql || myconf+=( --without-mysql_config )
- use amd64 && myconf+=( $(use_with netloc) )
- econf "${myconf[@]}" \
- $(use_enable debug) \
- $(use_enable pam) \
- $(use_enable X x11) \
- $(use_with ssl) \
- $(use_with munge) \
- $(use_with json) \
- $(use_with hdf5) \
- $(use_with ofed) \
- $(use_enable static-libs static) \
- $(use_enable multiple-slurmd)
-
- # --htmldir does not seems to propagate... Documentations are installed
- # in /usr/share/doc/slurm-2.3.0/html
- # instead of /usr/share/doc/slurm-2.3.0.2/html
- sed \
- -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
- -i doc/html/Makefile || die
- if use perl ; then
- # small hack to make it compile
- mkdir -p "${S}/src/api/.libs" || die
- mkdir -p "${S}/src/db_api/.libs" || die
- touch "${S}/src/api/.libs/libslurm.so" || die
- touch "${S}/src/db_api/.libs/libslurmdb.so" || die
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
- cd "${S}" || die
- rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
- fi
-}
-
-src_compile() {
- default
- use pam && emake -C contribs/pam
- if use perl ; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_compile
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
- cd "${S}" || die
- fi
- use torque && emake -C contribs/torque
-}
-
-src_install() {
- default
- use pam && emake DESTDIR="${D}" -C contribs/pam install
- if use perl; then
- cd "${LIBSLURM_PERL_S}" || die
- S="${LIBSLURM_PERL_S}" perl-module_src_install
- cd "${LIBSLURMDB_PERL_S}" || die
- S="${LIBSLURMDB_PERL_S}" perl-module_src_install
- cd "${S}" || die
- fi
- if use torque; then
- emake DESTDIR="${D}" -C contribs/torque
- rm -f "${ED}/usr/bin/mpiexec" || die
- fi
- use static-libs || find "${ED}" -name '*.la' -exec rm {} +
- # install sample configs
- keepdir /etc/slurm
- insinto /etc/slurm
- doins \
- etc/bluegene.conf.example \
- etc/cgroup.conf.example \
- etc/slurm.conf.example \
- etc/slurmdbd.conf.example
- exeinto /etc/slurm
- keepdir /etc/slurm/layouts.d
- insinto /etc/slurm/layouts.d
- newins etc/layouts.d.power.conf.example power.conf.example
- newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
- newins etc/layouts.d.unit.conf.example unit.conf.example
- # install init.d files
- newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
- newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
- newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
- # install conf.d files
- newconfd "${FILESDIR}/slurm.confd" slurm
- # install logrotate file
- insinto /etc/logrotate.d
- newins "${FILESDIR}/logrotate" slurm
- # install bashcomp
- newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
- bashcomp_alias scontrol \
- sreport sacctmgr squeue scancel sshare sbcast sinfo \
- sprio sacct salloc sbatch srun sattach sdiag sstat
- # install systemd files
- systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
- systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
-}
-
-pkg_preinst() {
- if use munge; then
- sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${ED}"etc/conf.d/slurm || die
- fi
-}
-
-create_folders_and_fix_permissions() {
- einfo "Fixing permissions in ${@}"
- mkdir -p ${@} || die
- chown -R ${PN}:${PN} ${@} || die
-}
-
-pkg_postinst() {
- paths=(
- "${EROOT}"var/${PN}/checkpoint
- "${EROOT}"var/${PN}
- "${EROOT}"var/spool/${PN}/slurmd
- "${EROOT}"var/spool/${PN}
- "${EROOT}"var/log/${PN}
- /var/tmp/${PN}/${PN}d
- /var/tmp/${PN}
- /run/${PN}
- )
- local folder_path
- for folder_path in ${paths[@]}; do
- create_folders_and_fix_permissions $folder_path
- done
- echo
-
- elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
- elog "through a (javascript enabled) browser to create a configureation file."
- elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
- echo
- elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
- elog "Your kernel must be compiled with the wanted cgroup feature:"
- elog " For the proctrack plugin:"
- elog " freezer"
- elog " For the task plugin:"
- elog " cpuset, memory, devices"
- elog " For the accounting plugin:"
- elog " cpuacct, memory, blkio"
- elog "Then, set these options in /etc/slurm/slurm.conf:"
- elog " ProctrackType=proctrack/cgroup"
- elog " TaskPlugin=task/cgroup"
- einfo
- ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
- for folder_path in ${paths[@]}; do
- ewarn " ${folder_path}"
- done
-}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2019-11-15 15:04 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2019-11-15 15:04 UTC (permalink / raw
To: gentoo-commits
commit: 8c3a1e6fafd3b859958e250818cfac17e471c09c
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Fri Nov 15 14:38:08 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Fri Nov 15 15:04:17 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=8c3a1e6f
sys-cluster/slurm: Version bump (v19.05.4.1)
Package-Manager: Portage-2.3.76, Repoman-2.3.16
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/Manifest | 1 +
sys-cluster/slurm/slurm-19.05.4.1.ebuild | 266 +++++++++++++++++++++++++++++++
2 files changed, 267 insertions(+)
diff --git a/sys-cluster/slurm/Manifest b/sys-cluster/slurm/Manifest
index 1ec305f1dbd..0f860576a6c 100644
--- a/sys-cluster/slurm/Manifest
+++ b/sys-cluster/slurm/Manifest
@@ -1,2 +1,3 @@
DIST slurm-18.08.7.tar.bz2 6186006 BLAKE2B a5458f72cbe93bc1103c2c7f3d428ae14239cb092edad2c683e448dda35f3e108fef0d9a3a86599da6058c9c98a86dafed9a087ffe6e8d7425db9cdb879954b3 SHA512 d0047086f1b716877cc5bb39539bf96a8fd08b1851c85fd85112c6432c1ce2a0f29fc9dd8803094c8fa44d063cec5f417e6bed231b6d338934ff4b48424a5a93
+DIST slurm-19-05-4-1.tar.gz 8446001 BLAKE2B d3b1524a72d7969b14788b93c7d64b03faf159b71b1ed8fb30782980b7b39e9f4a1d1435f4fbdce722ed9585e7d3285f9a84322c5a5d2f44d5e084bb38019ae4 SHA512 ecee26b23fc72ea4b6eb3039aada1814b5932d75eaf61501a31b97ac8f7b600864f2429a36de068f1f1cde178fa1383f2c53192af5b1a62766e3ffe48be4395c
DIST slurm-19.05.3-2.tar.bz2 6233270 BLAKE2B be59d157e99353340f9801f0adac21cfb8c3051f8d6a1bd94ad76fc05d0f83d1f933f72bf4e33b603521ec94cc859185bf56ecbcab674fcbff526164dd39d3cc SHA512 15d63f1ba693458b220ece5512210f1dba52273946809b338e33d684b9daadecd3cc77fda84c1b3bf8b03bc0fe8b8be0f429a96a1bf72a8b5c8cf169e0e1f5bb
diff --git a/sys-cluster/slurm/slurm-19.05.4.1.ebuild b/sys-cluster/slurm/slurm-19.05.4.1.ebuild
new file mode 100644
index 00000000000..2bfe56a32f5
--- /dev/null
+++ b/sys-cluster/slurm/slurm-19.05.4.1.ebuild
@@ -0,0 +1,266 @@
+# Copyright 1999-2019 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+if [[ ${PV} == *9999* ]]; then
+ EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
+ INHERIT_GIT="git-r3"
+ SRC_URI=""
+ KEYWORDS=""
+ MY_P="${P}"
+else
+ if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
+ MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
+ else
+ MY_PV=$(ver_rs 1-3 '-') # stable releases
+ fi
+ MY_P="${PN}-${MY_PV}"
+ INHERIT_GIT=""
+ SRC_URI="https://github.com/SchedMD/slurm/archive/${MY_P}.tar.gz"
+ KEYWORDS="~amd64 ~x86"
+fi
+
+inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
+
+DESCRIPTION="A Highly Scalable Resource Manager"
+HOMEPAGE="https://www.schedmd.com https://github.com/SchedMD/slurm"
+
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd ssl static-libs ucx torque X"
+
+COMMON_DEPEND="
+ !sys-cluster/torque
+ !net-analyzer/slurm
+ !net-analyzer/sinfo
+ || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
+ mysql? (
+ || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
+ slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
+ )
+ munge? ( sys-auth/munge )
+ pam? ( sys-libs/pam )
+ ssl? ( dev-libs/openssl:0= )
+ lua? ( dev-lang/lua:0= )
+ !lua? ( !dev-lang/lua )
+ ipmi? ( sys-libs/freeipmi )
+ json? ( dev-libs/json-c:= )
+ amd64? ( netloc? ( sys-apps/netloc ) )
+ hdf5? ( sci-libs/hdf5:= )
+ numa? ( sys-process/numactl )
+ ofed? ( sys-fabric/ofed )
+ ucx? ( sys-cluster/ucx )
+ X? ( net-libs/libssh2 )
+ >=sys-apps/hwloc-1.1.1-r1
+ sys-libs/ncurses:0=
+ app-arch/lz4:0=
+ sys-libs/readline:0="
+DEPEND="${COMMON_DEPEND}
+ html? ( sys-apps/man2html )"
+RDEPEND="${OMMON_DEPEND}
+ acct-user/slurm
+ acct-group/slurm
+ dev-libs/libcgroup"
+
+REQUIRED_USE="torque? ( perl )"
+
+S="${WORKDIR}/${PN}-${MY_P}"
+
+LIBSLURM_PERL_S="${WORKDIR}/${MY_P}/contribs/perlapi/libslurm/perl"
+LIBSLURMDB_PERL_S="${WORKDIR}/${MY_P}/contribs/perlapi/libslurmdb/perl"
+
+RESTRICT="test"
+
+src_unpack() {
+ if [[ ${PV} == *9999* ]]; then
+ git-r3_src_unpack
+ else
+ default
+ fi
+}
+
+src_prepare() {
+ tc-ld-disable-gold
+ default
+
+ # pids should go to /var/run/slurm
+ sed \
+ -e 's:/tmp:/var/tmp:g' \
+ -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
+ -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
+ -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
+ -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
+ -i "${S}/etc/slurm.conf.example" \
+ || die "Can't sed for /var/run/slurmctld.pid"
+ sed \
+ -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
+ -i "${S}/etc/slurmdbd.conf.example" \
+ || die "Can't sed for /var/run/slurmdbd.pid"
+ # gentooify systemd services
+ sed \
+ -e 's:sysconfig/.*:conf.d/slurm:g' \
+ -e 's:var/run/:run/slurm/:g' \
+ -e '/^EnvironmentFile=.*/d' \
+ -i "${S}/etc"/*.service.in \
+ || die "Can't sed systemd services for sysconfig or var/run/"
+
+ hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
+ eautoreconf
+}
+
+src_configure() {
+ local myconf=(
+ --sysconfdir="${EPREFIX}/etc/${PN}"
+ --with-hwloc="${EPREFIX}/usr"
+ --docdir="${EPREFIX}/usr/share/doc/${P}"
+ --htmldir="${EPREFIX}/usr/share/doc/${P}"
+ )
+ use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
+ use mysql || myconf+=( --without-mysql_config )
+ use amd64 && myconf+=( $(use_with netloc) )
+ econf "${myconf[@]}" \
+ $(use_enable debug) \
+ $(use_enable pam) \
+ $(use_enable X x11) \
+ $(use_with ssl) \
+ $(use_with munge) \
+ $(use_with json) \
+ $(use_with hdf5) \
+ $(use_with ofed) \
+ $(use_with ucx) \
+ $(use_enable static-libs static) \
+ $(use_enable multiple-slurmd)
+
+ # --htmldir does not seems to propagate... Documentations are installed
+ # in /usr/share/doc/slurm-2.3.0/html
+ # instead of /usr/share/doc/slurm-2.3.0.2/html
+ sed \
+ -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
+ -i doc/html/Makefile || die
+ if use perl ; then
+ # small hack to make it compile
+ mkdir -p "${S}/src/api/.libs" || die
+ mkdir -p "${S}/src/db_api/.libs" || die
+ touch "${S}/src/api/.libs/libslurm.so" || die
+ touch "${S}/src/db_api/.libs/libslurmdb.so" || die
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${S}" || die
+ rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
+ fi
+}
+
+src_compile() {
+ default
+ use pam && emake -C contribs/pam
+ if use perl ; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_compile
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
+ cd "${S}" || die
+ fi
+ use torque && emake -C contribs/torque
+}
+
+src_install() {
+ default
+ use pam && emake DESTDIR="${D}" -C contribs/pam install
+ if use perl; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_install
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_install
+ cd "${S}" || die
+ fi
+ if use torque; then
+ emake DESTDIR="${D}" -C contribs/torque
+ rm -f "${D}"/usr/bin/mpiexec || die
+ fi
+ use static-libs || find "${ED}" -name '*.la' -exec rm {} +
+ # install sample configs
+ keepdir /etc/slurm
+ insinto /etc/slurm
+ doins \
+ etc/bluegene.conf.example \
+ etc/cgroup.conf.example \
+ etc/slurm.conf.example \
+ etc/slurmdbd.conf.example
+ exeinto /etc/slurm
+ keepdir /etc/slurm/layouts.d
+ insinto /etc/slurm/layouts.d
+ newins etc/layouts.d.power.conf.example power.conf.example
+ newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
+ newins etc/layouts.d.unit.conf.example unit.conf.example
+ # install init.d files
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
+ # install conf.d files
+ newconfd "${FILESDIR}/slurm.confd" slurm
+ # install logrotate file
+ insinto /etc/logrotate.d
+ newins "${FILESDIR}/logrotate" slurm
+ # install bashcomp
+ newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
+ bashcomp_alias scontrol \
+ sreport sacctmgr squeue scancel sshare sbcast sinfo \
+ sprio sacct salloc sbatch srun sattach sdiag sstat
+ # install systemd files
+ systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
+ systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
+}
+
+pkg_preinst() {
+ if use munge; then
+ sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
+ fi
+}
+
+create_folders_and_fix_permissions() {
+ einfo "Fixing permissions in ${@}"
+ mkdir -p ${@} || die
+ chown -R ${PN}:${PN} ${@} || die
+}
+
+pkg_postinst() {
+ paths=(
+ "${EROOT}"/var/${PN}/checkpoint
+ "${EROOT}"/var/${PN}
+ "${EROOT}"/var/spool/${PN}/slurmd
+ "${EROOT}"/var/spool/${PN}
+ "${EROOT}"/var/log/${PN}
+ /var/tmp/${PN}/${PN}d
+ /var/tmp/${PN}
+ /run/${PN}
+ )
+ local folder_path
+ for folder_path in ${paths[@]}; do
+ create_folders_and_fix_permissions $folder_path
+ done
+ echo
+
+ elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
+ elog "through a (javascript enabled) browser to create a configureation file."
+ elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
+ echo
+ elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
+ elog "Your kernel must be compiled with the wanted cgroup feature:"
+ elog " For the proctrack plugin:"
+ elog " freezer"
+ elog " For the task plugin:"
+ elog " cpuset, memory, devices"
+ elog " For the accounting plugin:"
+ elog " cpuacct, memory, blkio"
+ elog "Then, set these options in /etc/slurm/slurm.conf:"
+ elog " ProctrackType=proctrack/cgroup"
+ elog " TaskPlugin=task/cgroup"
+ einfo
+ ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
+ for folder_path in ${paths[@]}; do
+ ewarn " ${folder_path}"
+ done
+}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2019-10-20 20:27 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2019-10-20 20:27 UTC (permalink / raw
To: gentoo-commits
commit: 8e2dcab16c0c3b8432ff6605c218c11dd8a64e61
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sun Oct 20 20:26:04 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sun Oct 20 20:27:09 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=8e2dcab1
sys-cluster/slurm: Add slashes
Package-Manager: Portage-2.3.76, Repoman-2.3.16
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/slurm-19.05.3.2.ebuild | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/sys-cluster/slurm/slurm-19.05.3.2.ebuild b/sys-cluster/slurm/slurm-19.05.3.2.ebuild
index 58a1775accb..9487d67f72c 100644
--- a/sys-cluster/slurm/slurm-19.05.3.2.ebuild
+++ b/sys-cluster/slurm/slurm-19.05.3.2.ebuild
@@ -177,7 +177,7 @@ src_install() {
fi
if use torque; then
emake DESTDIR="${D}" -C contribs/torque
- rm -f "${ED}/usr/bin/mpiexec" || die
+ rm -f "${D}"/usr/bin/mpiexec || die
fi
use static-libs || find "${ED}" -name '*.la' -exec rm {} +
# install sample configs
@@ -221,7 +221,7 @@ src_install() {
pkg_preinst() {
if use munge; then
- sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${ED}"etc/conf.d/slurm || die
+ sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${D}"/etc/conf.d/slurm || die
fi
}
@@ -233,11 +233,11 @@ create_folders_and_fix_permissions() {
pkg_postinst() {
paths=(
- "${EROOT}"var/${PN}/checkpoint
- "${EROOT}"var/${PN}
- "${EROOT}"var/spool/${PN}/slurmd
- "${EROOT}"var/spool/${PN}
- "${EROOT}"var/log/${PN}
+ "${EROOT}"/var/${PN}/checkpoint
+ "${EROOT}"/var/${PN}
+ "${EROOT}"/var/spool/${PN}/slurmd
+ "${EROOT}"/var/spool/${PN}
+ "${EROOT}"/var/log/${PN}
/var/tmp/${PN}/${PN}d
/var/tmp/${PN}
/run/${PN}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2019-10-20 19:35 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2019-10-20 19:35 UTC (permalink / raw
To: gentoo-commits
commit: 808db2cfe02cd63deb0eb563b8778faa9b006e7a
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sun Oct 20 19:35:09 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sun Oct 20 19:35:47 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=808db2cf
sys-cluster/slurm: Version bump (v19.05.3.2)
Package-Manager: Portage-2.3.76, Repoman-2.3.16
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/Manifest | 1 +
sys-cluster/slurm/metadata.xml | 1 +
sys-cluster/slurm/slurm-19.05.3.2.ebuild | 271 +++++++++++++++++++++++++++++++
3 files changed, 273 insertions(+)
diff --git a/sys-cluster/slurm/Manifest b/sys-cluster/slurm/Manifest
index d61e5c59422..1ec305f1dbd 100644
--- a/sys-cluster/slurm/Manifest
+++ b/sys-cluster/slurm/Manifest
@@ -1 +1,2 @@
DIST slurm-18.08.7.tar.bz2 6186006 BLAKE2B a5458f72cbe93bc1103c2c7f3d428ae14239cb092edad2c683e448dda35f3e108fef0d9a3a86599da6058c9c98a86dafed9a087ffe6e8d7425db9cdb879954b3 SHA512 d0047086f1b716877cc5bb39539bf96a8fd08b1851c85fd85112c6432c1ce2a0f29fc9dd8803094c8fa44d063cec5f417e6bed231b6d338934ff4b48424a5a93
+DIST slurm-19.05.3-2.tar.bz2 6233270 BLAKE2B be59d157e99353340f9801f0adac21cfb8c3051f8d6a1bd94ad76fc05d0f83d1f933f72bf4e33b603521ec94cc859185bf56ecbcab674fcbff526164dd39d3cc SHA512 15d63f1ba693458b220ece5512210f1dba52273946809b338e33d684b9daadecd3cc77fda84c1b3bf8b03bc0fe8b8be0f429a96a1bf72a8b5c8cf169e0e1f5bb
diff --git a/sys-cluster/slurm/metadata.xml b/sys-cluster/slurm/metadata.xml
index c588bb7a952..f4298bcbe29 100644
--- a/sys-cluster/slurm/metadata.xml
+++ b/sys-cluster/slurm/metadata.xml
@@ -24,5 +24,6 @@
<flag name="ofed">Add Infiniband support via ofed</flag>
<flag name="slurmdbd">Install SQL server for slurmdbd</flag>
<flag name="torque">Enable perl scripts that emulates pbs (qstat, qsub etc.)</flag>
+ <flag name="ucx">Enable Unified Communication X library support</flag>
</use>
</pkgmetadata>
diff --git a/sys-cluster/slurm/slurm-19.05.3.2.ebuild b/sys-cluster/slurm/slurm-19.05.3.2.ebuild
new file mode 100644
index 00000000000..58a1775accb
--- /dev/null
+++ b/sys-cluster/slurm/slurm-19.05.3.2.ebuild
@@ -0,0 +1,271 @@
+# Copyright 1999-2019 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+if [[ ${PV} == *9999* ]]; then
+ EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
+ INHERIT_GIT="git-r3"
+ SRC_URI=""
+ KEYWORDS=""
+ MY_P="${P}"
+else
+ if [[ ${PV} == *pre* || ${PV} == *rc* ]]; then
+ MY_PV=$(ver_rs '-0.') # pre-releases or release-candidate
+ else
+ MY_PV=$(ver_rs 3 '-') # stable releases
+ fi
+ MY_P="${PN}-${MY_PV}"
+ INHERIT_GIT=""
+ SRC_URI="https://download.schedmd.com/slurm/${MY_P}.tar.bz2"
+ KEYWORDS="~amd64 ~x86"
+fi
+
+inherit autotools bash-completion-r1 pam perl-module prefix toolchain-funcs systemd ${INHERIT_GIT}
+
+DESCRIPTION="A Highly Scalable Resource Manager"
+HOMEPAGE="https://www.schedmd.com"
+
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="debug hdf5 html ipmi json lua multiple-slurmd +munge mysql netloc numa ofed pam perl slurmdbd ssl static-libs ucx torque X"
+
+COMMON_DEPEND="
+ !sys-cluster/torque
+ !net-analyzer/slurm
+ !net-analyzer/sinfo
+ || ( sys-cluster/pmix[-pmi] >=sys-cluster/openmpi-2.0.0 )
+ mysql? (
+ || ( dev-db/mariadb-connector-c dev-db/mysql-connector-c )
+ slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
+ )
+ munge? ( sys-auth/munge )
+ pam? ( sys-libs/pam )
+ ssl? ( dev-libs/openssl:0= )
+ lua? ( dev-lang/lua:0= )
+ !lua? ( !dev-lang/lua )
+ ipmi? ( sys-libs/freeipmi )
+ json? ( dev-libs/json-c:= )
+ amd64? ( netloc? ( sys-apps/netloc ) )
+ hdf5? ( sci-libs/hdf5:= )
+ numa? ( sys-process/numactl )
+ ofed? ( sys-fabric/ofed )
+ ucx? ( sys-cluster/ucx )
+ X? ( net-libs/libssh2 )
+ >=sys-apps/hwloc-1.1.1-r1
+ sys-libs/ncurses:0=
+ app-arch/lz4:0=
+ sys-libs/readline:0="
+DEPEND="${COMMON_DEPEND}
+ html? ( sys-apps/man2html )"
+RDEPEND="${OMMON_DEPEND}
+ acct-user/slurm
+ acct-group/slurm
+ dev-libs/libcgroup"
+
+REQUIRED_USE="torque? ( perl )"
+
+S="${WORKDIR}/${MY_P}"
+
+LIBSLURM_PERL_S="${WORKDIR}/${MY_P}/contribs/perlapi/libslurm/perl"
+LIBSLURMDB_PERL_S="${WORKDIR}/${MY_P}/contribs/perlapi/libslurmdb/perl"
+
+RESTRICT="test"
+
+src_unpack() {
+ if [[ ${PV} == *9999* ]]; then
+ git-r3_src_unpack
+ else
+ default
+ fi
+}
+
+src_prepare() {
+ tc-ld-disable-gold
+ default
+
+ # pids should go to /var/run/slurm
+ sed \
+ -e 's:/tmp:/var/tmp:g' \
+ -e "s:/var/run/slurmctld.pid:${EPREFIX}/run/slurm/slurmctld.pid:g" \
+ -e "s:/var/run/slurmd.pid:${EPREFIX}/run/slurm/slurmd.pid:g" \
+ -e "s:StateSaveLocation=.*:StateSaveLocation=${EPREFIX}/var/spool/slurm:g" \
+ -e "s:SlurmdSpoolDir=.*:SlurmdSpoolDir=${EPREFIX}/var/spool/slurm/slurmd:g" \
+ -i "${S}/etc/slurm.conf.example" \
+ || die "Can't sed for /var/run/slurmctld.pid"
+ sed \
+ -e "s:/var/run/slurmdbd.pid:${EPREFIX}/run/slurm/slurmdbd.pid:g" \
+ -i "${S}/etc/slurmdbd.conf.example" \
+ || die "Can't sed for /var/run/slurmdbd.pid"
+ # gentooify systemd services
+ sed \
+ -e 's:sysconfig/.*:conf.d/slurm:g' \
+ -e 's:var/run/:run/slurm/:g' \
+ -i "${S}/etc"/*.service.in \
+ || die "Can't sed systemd services for sysconfig or var/run/"
+
+ hprefixify auxdir/{ax_check_zlib,x_ac_{lz4,ofed,munge}}.m4
+ eautoreconf
+}
+
+src_configure() {
+ local myconf=(
+ --sysconfdir="${EPREFIX}/etc/${PN}"
+ --with-hwloc="${EPREFIX}/usr"
+ --docdir="${EPREFIX}/usr/share/doc/${P}"
+ --htmldir="${EPREFIX}/usr/share/doc/${P}"
+ )
+ use pam && myconf+=( --with-pam_dir=$(getpam_mod_dir) )
+ use mysql || myconf+=( --without-mysql_config )
+ use amd64 && myconf+=( $(use_with netloc) )
+ econf "${myconf[@]}" \
+ $(use_enable debug) \
+ $(use_enable pam) \
+ $(use_enable X x11) \
+ $(use_with ssl) \
+ $(use_with munge) \
+ $(use_with json) \
+ $(use_with hdf5) \
+ $(use_with ofed) \
+ $(use_with ucx) \
+ $(use_enable static-libs static) \
+ $(use_enable multiple-slurmd)
+
+ # --htmldir does not seems to propagate... Documentations are installed
+ # in /usr/share/doc/slurm-2.3.0/html
+ # instead of /usr/share/doc/slurm-2.3.0.2/html
+ sed \
+ -e "s|htmldir = .*/html|htmldir = \${prefix}/share/doc/slurm-${PVR}/html|g" \
+ -i doc/html/Makefile || die
+ if use perl ; then
+ # small hack to make it compile
+ mkdir -p "${S}/src/api/.libs" || die
+ mkdir -p "${S}/src/db_api/.libs" || die
+ touch "${S}/src/api/.libs/libslurm.so" || die
+ touch "${S}/src/db_api/.libs/libslurmdb.so" || die
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" SRC_PREP="no" perl-module_src_configure
+ cd "${S}" || die
+ rm -rf "${S}/src/api/.libs" "${S}/src/db_api/.libs" || die
+ fi
+}
+
+src_compile() {
+ default
+ use pam && emake -C contribs/pam
+ if use perl ; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_compile
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_compile
+ cd "${S}" || die
+ fi
+ use torque && emake -C contribs/torque
+}
+
+src_install() {
+ default
+ use pam && emake DESTDIR="${D}" -C contribs/pam install
+ if use perl; then
+ cd "${LIBSLURM_PERL_S}" || die
+ S="${LIBSLURM_PERL_S}" perl-module_src_install
+ cd "${LIBSLURMDB_PERL_S}" || die
+ S="${LIBSLURMDB_PERL_S}" perl-module_src_install
+ cd "${S}" || die
+ fi
+ if use torque; then
+ emake DESTDIR="${D}" -C contribs/torque
+ rm -f "${ED}/usr/bin/mpiexec" || die
+ fi
+ use static-libs || find "${ED}" -name '*.la' -exec rm {} +
+ # install sample configs
+ keepdir /etc/slurm
+ insinto /etc/slurm
+ doins \
+ etc/bluegene.conf.example \
+ etc/cgroup.conf.example \
+ etc/slurm.conf.example \
+ etc/slurmdbd.conf.example
+ exeinto /etc/slurm
+ keepdir /etc/slurm/layouts.d
+ insinto /etc/slurm/layouts.d
+ newins etc/layouts.d.power.conf.example power.conf.example
+ newins etc/layouts.d.power_cpufreq.conf.example power_cpufreq.conf.example
+ newins etc/layouts.d.unit.conf.example unit.conf.example
+ # install init.d files
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmd.initd")" slurmd
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmctld.initd")" slurmctld
+ newinitd "$(prefixify_ro "${FILESDIR}/slurmdbd.initd")" slurmdbd
+ # install conf.d files
+ newconfd "${FILESDIR}/slurm.confd" slurm
+ # install logrotate file
+ insinto /etc/logrotate.d
+ newins "${FILESDIR}/logrotate" slurm
+ # install bashcomp
+ newbashcomp contribs/slurm_completion_help/slurm_completion.sh scontrol
+ bashcomp_alias scontrol \
+ sreport sacctmgr squeue scancel sshare sbcast sinfo \
+ sprio sacct salloc sbatch srun sattach sdiag sstat
+ # install systemd files
+ systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
+ systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
+
+ cd "${D}"/lib/systemd/system || die
+
+ for file in slurm*; do
+ sed -i -e '/^EnvironmentFile=.*/d' ${file} || die
+ done
+}
+
+pkg_preinst() {
+ if use munge; then
+ sed -i 's,\(SLURM_USE_MUNGE=\).*,\11,' "${ED}"etc/conf.d/slurm || die
+ fi
+}
+
+create_folders_and_fix_permissions() {
+ einfo "Fixing permissions in ${@}"
+ mkdir -p ${@} || die
+ chown -R ${PN}:${PN} ${@} || die
+}
+
+pkg_postinst() {
+ paths=(
+ "${EROOT}"var/${PN}/checkpoint
+ "${EROOT}"var/${PN}
+ "${EROOT}"var/spool/${PN}/slurmd
+ "${EROOT}"var/spool/${PN}
+ "${EROOT}"var/log/${PN}
+ /var/tmp/${PN}/${PN}d
+ /var/tmp/${PN}
+ /run/${PN}
+ )
+ local folder_path
+ for folder_path in ${paths[@]}; do
+ create_folders_and_fix_permissions $folder_path
+ done
+ echo
+
+ elog "Please visit the file '/usr/share/doc/${P}/html/configurator.html"
+ elog "through a (javascript enabled) browser to create a configureation file."
+ elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
+ echo
+ elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
+ elog "Your kernel must be compiled with the wanted cgroup feature:"
+ elog " For the proctrack plugin:"
+ elog " freezer"
+ elog " For the task plugin:"
+ elog " cpuset, memory, devices"
+ elog " For the accounting plugin:"
+ elog " cpuacct, memory, blkio"
+ elog "Then, set these options in /etc/slurm/slurm.conf:"
+ elog " ProctrackType=proctrack/cgroup"
+ elog " TaskPlugin=task/cgroup"
+ einfo
+ ewarn "Paths were created for slurm. Please use these paths in /etc/slurm/slurm.conf:"
+ for folder_path in ${paths[@]}; do
+ ewarn " ${folder_path}"
+ done
+}
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2019-10-20 18:35 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2019-10-20 18:35 UTC (permalink / raw
To: gentoo-commits
commit: 75377bdf192a71ab1c742c59706eec073179d5b6
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sun Oct 20 18:35:14 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sun Oct 20 18:35:52 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=75377bdf
sys-cluster/slurm: remove EnvironmentFile from systemd units
Package-Manager: Portage-2.3.76, Repoman-2.3.16
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/slurm-18.08.7.ebuild | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/sys-cluster/slurm/slurm-18.08.7.ebuild b/sys-cluster/slurm/slurm-18.08.7.ebuild
index b260ae6e392..69c7fcf16db 100644
--- a/sys-cluster/slurm/slurm-18.08.7.ebuild
+++ b/sys-cluster/slurm/slurm-18.08.7.ebuild
@@ -216,6 +216,12 @@ src_install() {
# install systemd files
systemd_newtmpfilesd "${FILESDIR}/slurm.tmpfiles" slurm.conf
systemd_dounit etc/slurmd.service etc/slurmctld.service etc/slurmdbd.service
+
+ cd "${D}"/lib/systemd/system || die
+
+ for file in slurm*; do
+ sed -i -e '/^EnvironmentFile=.*/d' ${file} || die
+ done
}
pkg_preinst() {
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2019-10-20 17:26 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2019-10-20 17:26 UTC (permalink / raw
To: gentoo-commits
commit: 7ec89166df69e1978f9542e1c076001fc3c36bc2
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sun Oct 20 17:25:18 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sun Oct 20 17:25:52 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=7ec89166
sys-cluster/slurm: remove primaryuri
Package-Manager: Portage-2.3.76, Repoman-2.3.16
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/slurm-18.08.7.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-cluster/slurm/slurm-18.08.7.ebuild b/sys-cluster/slurm/slurm-18.08.7.ebuild
index 78a580e9b30..b260ae6e392 100644
--- a/sys-cluster/slurm/slurm-18.08.7.ebuild
+++ b/sys-cluster/slurm/slurm-18.08.7.ebuild
@@ -67,7 +67,7 @@ REQUIRED_USE="torque? ( perl )"
LIBSLURM_PERL_S="${WORKDIR}/${MY_P}/contribs/perlapi/libslurm/perl"
LIBSLURMDB_PERL_S="${WORKDIR}/${MY_P}/contribs/perlapi/libslurmdb/perl"
-RESTRICT="primaryuri test"
+RESTRICT="test"
PATCHES=(
"${FILESDIR}"/${P}-disable-sview.patch
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2019-10-20 16:50 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2019-10-20 16:50 UTC (permalink / raw
To: gentoo-commits
commit: 666d7ba16d2dc714e798fa756ed361e25dc31fbb
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sun Oct 20 16:49:44 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sun Oct 20 16:50:03 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=666d7ba1
sys-cluster/slurm: respect CFLAGS
Package-Manager: Portage-2.3.76, Repoman-2.3.16
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/slurm-18.08.7.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sys-cluster/slurm/slurm-18.08.7.ebuild b/sys-cluster/slurm/slurm-18.08.7.ebuild
index b8797d5c132..78a580e9b30 100644
--- a/sys-cluster/slurm/slurm-18.08.7.ebuild
+++ b/sys-cluster/slurm/slurm-18.08.7.ebuild
@@ -115,7 +115,6 @@ src_prepare() {
}
src_configure() {
- use debug || myconf+=( --disable-debug )
local myconf=(
--sysconfdir="${EPREFIX}/etc/${PN}"
--with-hwloc="${EPREFIX}/usr"
@@ -126,6 +125,7 @@ src_configure() {
use mysql || myconf+=( --without-mysql_config )
use amd64 && myconf+=( $(use_with netloc) )
econf "${myconf[@]}" \
+ $(use_enable debug) \
$(use_enable pam) \
$(use_enable X x11) \
$(use_with ssl) \
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2019-10-12 18:40 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2019-10-12 18:40 UTC (permalink / raw
To: gentoo-commits
commit: 7933973f35d9c2bc8b83d25d6195cad509a25363
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sat Oct 12 18:40:27 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sat Oct 12 18:40:27 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=7933973f
sys-cluster/slurm: migrate to sys-libs/pam
Package-Manager: Portage-2.3.76, Repoman-2.3.16
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/slurm-17.11.13.2.ebuild | 2 +-
sys-cluster/slurm/slurm-18.08.7.ebuild | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-cluster/slurm/slurm-17.11.13.2.ebuild b/sys-cluster/slurm/slurm-17.11.13.2.ebuild
index d669350a8a3..1f9e31f2508 100644
--- a/sys-cluster/slurm/slurm-17.11.13.2.ebuild
+++ b/sys-cluster/slurm/slurm-17.11.13.2.ebuild
@@ -42,7 +42,7 @@ CDEPEND="
slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
)
munge? ( sys-auth/munge )
- pam? ( virtual/pam )
+ pam? ( sys-libs/pam )
ssl? ( dev-libs/openssl:0= )
lua? ( dev-lang/lua:0= )
!lua? ( !dev-lang/lua )
diff --git a/sys-cluster/slurm/slurm-18.08.7.ebuild b/sys-cluster/slurm/slurm-18.08.7.ebuild
index 5a7bf934b19..b8797d5c132 100644
--- a/sys-cluster/slurm/slurm-18.08.7.ebuild
+++ b/sys-cluster/slurm/slurm-18.08.7.ebuild
@@ -42,7 +42,7 @@ CDEPEND="
slurmdbd? ( || ( dev-db/mariadb dev-db/mysql ) )
)
munge? ( sys-auth/munge )
- pam? ( virtual/pam )
+ pam? ( sys-libs/pam )
ssl? ( dev-libs/openssl:0= )
lua? ( dev-lang/lua:0= )
!lua? ( !dev-lang/lua )
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2019-10-06 18:07 Mikle Kolyada
0 siblings, 0 replies; 57+ messages in thread
From: Mikle Kolyada @ 2019-10-06 18:07 UTC (permalink / raw
To: gentoo-commits
commit: 3d7e7bce3711cb490dcd27769960e01b4089c041
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sun Oct 6 18:06:44 2019 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sun Oct 6 18:07:31 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=3d7e7bce
sys-cluster/slurm: co-maintain
Package-Manager: Portage-2.3.76, Repoman-2.3.16
Signed-off-by: Mikle Kolyada <zlogene <AT> gentoo.org>
sys-cluster/slurm/metadata.xml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/sys-cluster/slurm/metadata.xml b/sys-cluster/slurm/metadata.xml
index ddcebd29a67..c588bb7a952 100644
--- a/sys-cluster/slurm/metadata.xml
+++ b/sys-cluster/slurm/metadata.xml
@@ -3,6 +3,11 @@
<pkgmetadata>
<maintainer type="person">
<email>alexxy@gentoo.org</email>
+ <name>Alexey Shvetsov</name>
+ </maintainer>
+ <maintainer type="person">
+ <email>zlogene@gentoo.org</email>
+ <name>Mikle Kolyada</name>
</maintainer>
<maintainer type="project">
<email>cluster@gentoo.org</email>
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2018-10-27 12:15 Justin Lecher
0 siblings, 0 replies; 57+ messages in thread
From: Justin Lecher @ 2018-10-27 12:15 UTC (permalink / raw
To: gentoo-commits
commit: c4c3069edbfb9bb37bc73cde4e9df278d84f59ae
Author: Justin Lecher <jlec <AT> gentoo <DOT> org>
AuthorDate: Sat Oct 27 12:15:08 2018 +0000
Commit: Justin Lecher <jlec <AT> gentoo <DOT> org>
CommitDate: Sat Oct 27 12:15:29 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c4c3069e
sys-cluster/slurm: Don't install non-existing files
Closes: https://bugs.gentoo.org/665514
Signed-off-by: Justin Lecher <jlec <AT> gentoo.org>
Package-Manager: Portage-2.3.40, Repoman-2.3.9
sys-cluster/slurm/slurm-18.08.0.ebuild | 3 ---
1 file changed, 3 deletions(-)
diff --git a/sys-cluster/slurm/slurm-18.08.0.ebuild b/sys-cluster/slurm/slurm-18.08.0.ebuild
index 837a4d32c76..b3b7d52d447 100644
--- a/sys-cluster/slurm/slurm-18.08.0.ebuild
+++ b/sys-cluster/slurm/slurm-18.08.0.ebuild
@@ -191,12 +191,9 @@ src_install() {
doins \
etc/bluegene.conf.example \
etc/cgroup.conf.example \
- etc/cgroup_allowed_devices_file.conf.example \
etc/slurm.conf.example \
etc/slurmdbd.conf.example
exeinto /etc/slurm
- doexe \
- etc/slurm.epilog.clean
keepdir /etc/slurm/layouts.d
insinto /etc/slurm/layouts.d
newins etc/layouts.d.power.conf.example power.conf.example
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2018-06-10 9:41 Justin Lecher
0 siblings, 0 replies; 57+ messages in thread
From: Justin Lecher @ 2018-06-10 9:41 UTC (permalink / raw
To: gentoo-commits
commit: 01804741ea7cc0ea726cb60e6edb439be45efb82
Author: Justin Lecher <jlec <AT> gentoo <DOT> org>
AuthorDate: Sun Jun 10 09:40:45 2018 +0000
Commit: Justin Lecher <jlec <AT> gentoo <DOT> org>
CommitDate: Sun Jun 10 09:41:07 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=01804741
sys-cluster/slurm: Disable ld.gold, bug filed upstream
Signed-off-by: Justin Lecher <jlec <AT> gentoo.org>
Package-Manager: Portage-2.3.40, Repoman-2.3.9
sys-cluster/slurm/slurm-17.02.11.ebuild | 3 ++-
sys-cluster/slurm/slurm-17.11.7.ebuild | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/sys-cluster/slurm/slurm-17.02.11.ebuild b/sys-cluster/slurm/slurm-17.02.11.ebuild
index 9387b9d5355..b52290725ed 100644
--- a/sys-cluster/slurm/slurm-17.02.11.ebuild
+++ b/sys-cluster/slurm/slurm-17.02.11.ebuild
@@ -22,7 +22,7 @@ else
S="${WORKDIR}/${MY_P}"
fi
-inherit autotools eutils pam perl-module prefix user ${INHERIT_GIT}
+inherit autotools eutils pam perl-module prefix toolchain-funcs user ${INHERIT_GIT}
DESCRIPTION="A Highly Scalable Resource Manager"
HOMEPAGE="https://www.schedmd.com"
@@ -71,6 +71,7 @@ pkg_setup() {
}
src_prepare() {
+ tc-ld-disable-gold
default
# pids should go to /var/run/slurm
diff --git a/sys-cluster/slurm/slurm-17.11.7.ebuild b/sys-cluster/slurm/slurm-17.11.7.ebuild
index dcd9cec0e6d..c0310a53cc3 100644
--- a/sys-cluster/slurm/slurm-17.11.7.ebuild
+++ b/sys-cluster/slurm/slurm-17.11.7.ebuild
@@ -22,7 +22,7 @@ else
S="${WORKDIR}/${MY_P}"
fi
-inherit autotools bash-completion-r1 eutils pam perl-module prefix user ${INHERIT_GIT}
+inherit autotools bash-completion-r1 eutils pam perl-module prefix toolchain-funcs user ${INHERIT_GIT}
DESCRIPTION="A Highly Scalable Resource Manager"
HOMEPAGE="https://www.schedmd.com"
@@ -72,6 +72,7 @@ pkg_setup() {
}
src_prepare() {
+ tc-ld-disable-gold
default
# pids should go to /var/run/slurm
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2017-11-26 17:17 Justin Lecher
0 siblings, 0 replies; 57+ messages in thread
From: Justin Lecher @ 2017-11-26 17:17 UTC (permalink / raw
To: gentoo-commits
commit: 4c498216e49c0e314b54f01fc80fcd72fb8ccfb2
Author: Justin Lecher <jlec <AT> gentoo <DOT> org>
AuthorDate: Sun Nov 26 16:50:40 2017 +0000
Commit: Justin Lecher <jlec <AT> gentoo <DOT> org>
CommitDate: Sun Nov 26 17:17:06 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=4c498216
sys-cluster/slurm: Add missing prefix.eclass
Closes: https://bugs.gentoo.org/638744
Closes: https://bugs.gentoo.org/637348
Package-Manager: Portage-2.3.14, Repoman-2.3.6
Signed-off-by: Justin Lecher <jlec <AT> gentoo.org>
sys-cluster/slurm/slurm-16.05.11.ebuild | 2 +-
sys-cluster/slurm/slurm-17.02.9.ebuild | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-cluster/slurm/slurm-16.05.11.ebuild b/sys-cluster/slurm/slurm-16.05.11.ebuild
index 3438722b95d..b04149a4cce 100644
--- a/sys-cluster/slurm/slurm-16.05.11.ebuild
+++ b/sys-cluster/slurm/slurm-16.05.11.ebuild
@@ -22,7 +22,7 @@ else
S="${WORKDIR}/${MY_P}"
fi
-inherit autotools eutils pam perl-module user ${INHERIT_GIT}
+inherit autotools eutils pam perl-module prefix user ${INHERIT_GIT}
DESCRIPTION="SLURM: A Highly Scalable Resource Manager"
HOMEPAGE="https://www.schedmd.com"
diff --git a/sys-cluster/slurm/slurm-17.02.9.ebuild b/sys-cluster/slurm/slurm-17.02.9.ebuild
index 3f6085571b0..a6b63138f0d 100644
--- a/sys-cluster/slurm/slurm-17.02.9.ebuild
+++ b/sys-cluster/slurm/slurm-17.02.9.ebuild
@@ -22,7 +22,7 @@ else
S="${WORKDIR}/${MY_P}"
fi
-inherit autotools eutils pam perl-module user ${INHERIT_GIT}
+inherit autotools eutils pam perl-module prefix user ${INHERIT_GIT}
DESCRIPTION="A Highly Scalable Resource Manager"
HOMEPAGE="https://www.schedmd.com"
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2017-11-26 17:17 Justin Lecher
0 siblings, 0 replies; 57+ messages in thread
From: Justin Lecher @ 2017-11-26 17:17 UTC (permalink / raw
To: gentoo-commits
commit: 4c004e09e0f22f5dc591d9a25ca23c984915477e
Author: Justin Lecher <jlec <AT> gentoo <DOT> org>
AuthorDate: Sun Nov 26 17:08:38 2017 +0000
Commit: Justin Lecher <jlec <AT> gentoo <DOT> org>
CommitDate: Sun Nov 26 17:17:06 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=4c004e09
sys-cluster/slurm: No tests defined
Closes: https://bugs.gentoo.org/624448
Signed-off-by: Justin Lecher <jlec <AT> gentoo.org>
Package-Manager: Portage-2.3.14, Repoman-2.3.6
sys-cluster/slurm/slurm-16.05.11.ebuild | 2 +-
sys-cluster/slurm/slurm-17.02.9.ebuild | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sys-cluster/slurm/slurm-16.05.11.ebuild b/sys-cluster/slurm/slurm-16.05.11.ebuild
index b04149a4cce..6f935a07577 100644
--- a/sys-cluster/slurm/slurm-16.05.11.ebuild
+++ b/sys-cluster/slurm/slurm-16.05.11.ebuild
@@ -50,7 +50,7 @@ REQUIRED_USE="torque? ( perl )"
LIBSLURM_PERL_S="${WORKDIR}/${P}/contribs/perlapi/libslurm/perl"
LIBSLURMDB_PERL_S="${WORKDIR}/${P}/contribs/perlapi/libslurmdb/perl"
-RESTRICT="primaryuri"
+RESTRICT="primaryuri test"
PATCHES=(
"${FILESDIR}"/${P}-disable-sview.patch
diff --git a/sys-cluster/slurm/slurm-17.02.9.ebuild b/sys-cluster/slurm/slurm-17.02.9.ebuild
index a6b63138f0d..f4c3c841d3f 100644
--- a/sys-cluster/slurm/slurm-17.02.9.ebuild
+++ b/sys-cluster/slurm/slurm-17.02.9.ebuild
@@ -50,7 +50,7 @@ REQUIRED_USE="torque? ( perl )"
LIBSLURM_PERL_S="${WORKDIR}/${P}/contribs/perlapi/libslurm/perl"
LIBSLURMDB_PERL_S="${WORKDIR}/${P}/contribs/perlapi/libslurmdb/perl"
-RESTRICT="primaryuri"
+RESTRICT="primaryuri test"
PATCHES=(
"${FILESDIR}"/${P}-disable-sview.patch
^ permalink raw reply related [flat|nested] 57+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/
@ 2017-07-30 9:23 Michał Górny
0 siblings, 0 replies; 57+ messages in thread
From: Michał Górny @ 2017-07-30 9:23 UTC (permalink / raw
To: gentoo-commits
commit: 0deff097b2eaf288c2d2480e69f4564b6ddd57dd
Author: David Hicks <david <AT> hicks <DOT> id <DOT> au>
AuthorDate: Sat Jul 29 14:48:50 2017 +0000
Commit: Michał Górny <mgorny <AT> gentoo <DOT> org>
CommitDate: Sun Jul 30 09:22:45 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=0deff097
sys-cluster/slurm: use HTTPS for GitHub, HOMEPAGE, SRC_URI and doc
Package-Manager: Portage-2.3.6, Repoman-2.3.3
sys-cluster/slurm/slurm-16.05.2.ebuild | 8 ++++----
sys-cluster/slurm/slurm-17.02.6.ebuild | 8 ++++----
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/sys-cluster/slurm/slurm-16.05.2.ebuild b/sys-cluster/slurm/slurm-16.05.2.ebuild
index 9e0f02d6bbf..956fa3e1251 100644
--- a/sys-cluster/slurm/slurm-16.05.2.ebuild
+++ b/sys-cluster/slurm/slurm-16.05.2.ebuild
@@ -4,7 +4,7 @@
EAPI=6
if [[ ${PV} == *9999* ]]; then
- EGIT_REPO_URI="git://github.com/SchedMD/slurm.git"
+ EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
INHERIT_GIT="git-r3"
SRC_URI=""
KEYWORDS=""
@@ -17,7 +17,7 @@ else
fi
MY_P="${PN}-${MY_PV}"
INHERIT_GIT=""
- SRC_URI="http://www.schedmd.com/download/latest/${MY_P}.tar.bz2"
+ SRC_URI="https://www.schedmd.com/download/latest/${MY_P}.tar.bz2"
KEYWORDS="~amd64 ~x86"
S="${WORKDIR}/${MY_P}"
fi
@@ -25,7 +25,7 @@ fi
inherit autotools eutils pam perl-module user prefix ${INHERIT_GIT}
DESCRIPTION="SLURM: A Highly Scalable Resource Manager"
-HOMEPAGE="http://www.schedmd.com"
+HOMEPAGE="https://www.schedmd.com"
LICENSE="GPL-2"
SLOT="0"
@@ -220,7 +220,7 @@ pkg_postinst() {
elog "through a (javascript enabled) browser to create a configureation file."
elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
einfo
- elog "For cgroup support, please see http://www.schedmd.com/slurmdocs/cgroup.conf.html"
+ elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
elog "Your kernel must be compiled with the wanted cgroup feature:"
elog " General setup --->"
elog " [*] Control Group support --->"
diff --git a/sys-cluster/slurm/slurm-17.02.6.ebuild b/sys-cluster/slurm/slurm-17.02.6.ebuild
index 1d246ec803a..72d5cafc994 100644
--- a/sys-cluster/slurm/slurm-17.02.6.ebuild
+++ b/sys-cluster/slurm/slurm-17.02.6.ebuild
@@ -4,7 +4,7 @@
EAPI=6
if [[ ${PV} == *9999* ]]; then
- EGIT_REPO_URI="git://github.com/SchedMD/slurm.git"
+ EGIT_REPO_URI="https://github.com/SchedMD/slurm.git"
INHERIT_GIT="git-r3"
SRC_URI=""
KEYWORDS=""
@@ -17,7 +17,7 @@ else
fi
MY_P="${PN}-${MY_PV}"
INHERIT_GIT=""
- SRC_URI="http://www.schedmd.com/download/latest/${MY_P}.tar.bz2"
+ SRC_URI="https://www.schedmd.com/download/latest/${MY_P}.tar.bz2"
KEYWORDS="~amd64 ~x86"
S="${WORKDIR}/${MY_P}"
fi
@@ -25,7 +25,7 @@ fi
inherit autotools eutils pam perl-module user prefix ${INHERIT_GIT}
DESCRIPTION="A Highly Scalable Resource Manager"
-HOMEPAGE="http://www.schedmd.com"
+HOMEPAGE="https://www.schedmd.com"
LICENSE="GPL-2"
SLOT="0"
@@ -213,7 +213,7 @@ pkg_postinst() {
elog "through a (javascript enabled) browser to create a configureation file."
elog "Copy that file to /etc/slurm/slurm.conf on all nodes (including the headnode) of your cluster."
echo
- elog "For cgroup support, please see http://www.schedmd.com/slurmdocs/cgroup.conf.html"
+ elog "For cgroup support, please see https://www.schedmd.com/slurmdocs/cgroup.conf.html"
elog "Your kernel must be compiled with the wanted cgroup feature:"
elog " General setup --->"
elog " [*] Control Group support --->"
^ permalink raw reply related [flat|nested] 57+ messages in thread
end of thread, other threads:[~2025-04-23 8:29 UTC | newest]
Thread overview: 57+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-11-12 19:56 [gentoo-commits] repo/gentoo:master commit in: sys-cluster/slurm/ Justin Lecher
-- strict thread matches above, loose matches on Subject: below --
2025-04-23 8:29 Michał Górny
2024-10-18 13:47 Benda XU
2024-10-18 13:47 Benda XU
2024-10-18 13:47 Benda XU
2022-10-27 4:48 Sam James
2022-10-06 11:14 Joonas Niilola
2022-09-15 8:06 Alexey Shvetsov
2022-07-09 8:38 David Seifert
2022-06-26 7:02 Sam James
2022-02-02 6:21 Sam James
2022-02-02 5:30 Sam James
2022-01-16 18:47 David Seifert
2021-10-29 22:44 Sam James
2021-10-12 7:06 Sam James
2021-07-30 23:31 Sam James
2021-07-05 19:38 Marek Szuba
2021-07-05 19:38 Marek Szuba
2021-03-25 23:31 Conrad Kostecki
2021-03-13 17:24 David Seifert
2021-03-07 11:58 David Seifert
2021-01-05 15:17 Mikle Kolyada
2020-12-01 12:16 Mikle Kolyada
2020-12-01 12:13 Mikle Kolyada
2020-09-20 13:07 Mikle Kolyada
2020-09-20 13:07 Mikle Kolyada
2020-08-29 10:10 Mikle Kolyada
2020-07-26 1:53 Thomas Deutschmann
2020-06-07 10:54 Mikle Kolyada
2020-05-25 20:47 Alexey Shvetsov
2020-05-25 19:46 Alexey Shvetsov
2020-05-22 10:39 Mikle Kolyada
2020-05-22 10:38 Mikle Kolyada
2020-05-14 14:21 Mikle Kolyada
2020-05-14 14:21 Mikle Kolyada
2020-03-27 13:30 Mikle Kolyada
2020-03-27 13:23 Mikle Kolyada
2020-02-29 13:00 Mikle Kolyada
2019-12-21 11:11 Mikle Kolyada
2019-12-21 9:46 Mikle Kolyada
2019-12-21 9:05 Mikle Kolyada
2019-12-21 8:59 Mikle Kolyada
2019-12-21 8:25 Mikle Kolyada
2019-12-01 8:56 Mikle Kolyada
2019-11-15 15:04 Mikle Kolyada
2019-10-20 20:27 Mikle Kolyada
2019-10-20 19:35 Mikle Kolyada
2019-10-20 18:35 Mikle Kolyada
2019-10-20 17:26 Mikle Kolyada
2019-10-20 16:50 Mikle Kolyada
2019-10-12 18:40 Mikle Kolyada
2019-10-06 18:07 Mikle Kolyada
2018-10-27 12:15 Justin Lecher
2018-06-10 9:41 Justin Lecher
2017-11-26 17:17 Justin Lecher
2017-11-26 17:17 Justin Lecher
2017-07-30 9:23 Michał Górny
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox