* [gentoo-commits] repo/gentoo:master commit in: dev-lang/perl/, dev-lang/perl/files/eblits/
@ 2016-05-15 21:45 Andreas Hüttel
0 siblings, 0 replies; 4+ messages in thread
From: Andreas Hüttel @ 2016-05-15 21:45 UTC (permalink / raw
To: gentoo-commits
commit: 6cfbc5442acc3a68dea7e4639cfee164c88cb85a
Author: Andreas K. Hüttel <dilfridge <AT> gentoo <DOT> org>
AuthorDate: Sun May 15 21:44:26 2016 +0000
Commit: Andreas Hüttel <dilfridge <AT> gentoo <DOT> org>
CommitDate: Sun May 15 21:45:07 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=6cfbc544
dev-lang/perl: Add some missing files to fix the eblit logic
Package-Manager: portage-2.2.28
dev-lang/perl/files/eblits/common-v50240001.eblit | 71 ++++++++
.../files/eblits/src_configure-v50240001.eblit | 188 +++++++++++++++++++++
.../perl/files/eblits/src_install-v50240001.eblit | 51 ++++++
dev-lang/perl/perl-5.24.0.ebuild | 4 +-
4 files changed, 312 insertions(+), 2 deletions(-)
diff --git a/dev-lang/perl/files/eblits/common-v50240001.eblit b/dev-lang/perl/files/eblits/common-v50240001.eblit
new file mode 100644
index 0000000..2a8d815
--- /dev/null
+++ b/dev-lang/perl/files/eblits/common-v50240001.eblit
@@ -0,0 +1,71 @@
+# Copyright 1999-2012 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+src_remove_dual_file() {
+ local i pkg ver
+ pkg="$1"
+ ver="$2"
+ shift 2
+ case "${EBUILD_PHASE:-none}" in
+ postinst|postrm)
+ for i in "$@" ; do
+ alternatives_auto_makesym "${i}" "${i}-[0-9]*"
+ done
+ ;;
+ setup)
+ for i in "$@" ; do
+ if [[ -f ${EROOT}${i} && ! -h ${EROOT}${i} ]] ; then
+ has_version ${pkg} && ewarn "You must reinstall ${pkg} !"
+ break
+ fi
+ done
+ ;;
+ install)
+ for i in "$@" ; do
+ if ! [[ -f "${ED}"${i} ]] ; then
+ ewarn "${i} does not exist!"
+ continue
+ fi
+ mv "${ED}"${i}{,-${ver}-${P}} || die
+ done
+ ;;
+ esac
+}
+
+src_remove_dual_man() {
+ local i pkg ver ff
+ pkg="$1"
+ ver="$2"
+ shift 2
+ case "${EBUILD_PHASE:-none}" in
+ postinst|postrm)
+ for i in "$@" ; do
+ ff=`echo "${EROOT}${i%.[0-9]}-${ver}-${P}${i#${i%.[0-9]}}"*`
+ ff=${ff##*${i#${i%.[0-9]}}}
+ alternatives_auto_makesym "${i}${ff}" "${i%.[0-9]}-[0-9]*"
+ done
+ ;;
+ install)
+ for i in "$@" ; do
+ if ! [[ -f "${ED}"${i} ]] ; then
+ ewarn "${i} does not exist!"
+ continue
+ fi
+ mv "${ED}"${i} "${ED}"${i%.[0-9]}-${ver}-${P}${i#${i%.[0-9]}} || die
+ done
+ ;;
+ esac
+}
+
+src_remove_dual() {
+ local i pkg ver
+ pkg="$1"
+ ver="$2"
+ shift 2
+ for i in "$@" ; do
+ src_remove_dual_file "${pkg}" "${ver}" "/usr/bin/${i}"
+ src_remove_dual_man "${pkg}" "${ver}" "/usr/share/man/man1/${i}.1"
+ done
+}
+
diff --git a/dev-lang/perl/files/eblits/src_configure-v50240001.eblit b/dev-lang/perl/files/eblits/src_configure-v50240001.eblit
new file mode 100644
index 0000000..05fa86b
--- /dev/null
+++ b/dev-lang/perl/files/eblits/src_configure-v50240001.eblit
@@ -0,0 +1,188 @@
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+myconf() {
+ # the myconf array is declared in src_configure
+ myconf=( "${myconf[@]}" "$@" )
+}
+
+eblit-perl-src_configure() {
+ declare -a myconf
+
+ export LC_ALL="C"
+ [[ ${COLUMNS:-1} -ge 1 ]] || unset COLUMNS # bug #394091
+
+ # some arches and -O do not mix :)
+ use ppc && replace-flags -O? -O1
+ # Perl has problems compiling with -Os in your flags with glibc
+ use elibc_uclibc || replace-flags "-Os" "-O2"
+ # This flag makes compiling crash in interesting ways
+ filter-flags "-malign-double"
+ # Fixes bug #97645
+ use ppc && filter-flags "-mpowerpc-gpopt"
+ # Fixes bug #143895 on gcc-4.1.1
+ filter-flags "-fsched2-use-superblocks"
+
+ use sparc && myconf -Ud_longdbl
+
+ export BUILD_BZIP2=0
+ export BZIP2_INCLUDE=${EPREFIX}/usr/include
+ export BZIP2_LIB=${EPREFIX}/usr/$(get_libdir)
+
+ export BUILD_ZLIB=False
+ export ZLIB_INCLUDE=${EPREFIX}/usr/include
+ export ZLIB_LIB=${EPREFIX}/usr/$(get_libdir)
+
+ # allow either gdbm to provide ndbm (in <gdbm/ndbm.h>) or db1
+
+ myndbm='U'
+ mygdbm='U'
+ mydb='U'
+
+ if use gdbm ; then
+ mygdbm='D'
+ myndbm='D'
+ fi
+ if use berkdb ; then
+ mydb='D'
+ has_version '=sys-libs/db-1*' && myndbm='D'
+ fi
+
+ myconf "-${myndbm}i_ndbm" "-${mygdbm}i_gdbm" "-${mydb}i_db"
+
+ if use alpha && [[ "$(tc-getCC)" = "ccc" ]] ; then
+ ewarn "Perl will not be built with berkdb support, use gcc if you needed it..."
+ myconf -Ui_db -Ui_ndbm
+ fi
+
+ use ithreads && myconf -Dusethreads
+
+ if use debug ; then
+ append-cflags "-g"
+ myconf -DDEBUGGING
+ elif [[ ${CFLAGS} == *-g* ]] ; then
+ myconf -DDEBUGGING=-g
+ else
+ myconf -DDEBUGGING=none
+ fi
+
+ if [[ -n ${PERL_OLDVERSEN} ]] ; then
+ local inclist=$(for v in ${PERL_OLDVERSEN}; do echo -n "${v}/${myarch}${mythreading} ${v} "; done )
+ myconf -Dinc_version_list="${inclist}"
+ fi
+
+ [[ ${ELIBC} == "FreeBSD" ]] && myconf "-Dlibc=/usr/$(get_libdir)/libc.a"
+
+ # Make sure we can do the final link #523730, need to set deployment
+ # target to override hardcoded 10.3 which breaks on modern OSX
+ [[ ${CHOST} == *-darwin* ]] && \
+ myconf "-Dld=env MACOSX_DEPLOYMENT_TARGET=${MACOSX_DEPLOYMENT_TARGET} $(tc-getCC)"
+
+ # Prefix: the host system needs not to follow Gentoo multilib stuff, and in
+ # Prefix itself we don't do multilib either, so make sure perl can find
+ # something compatible.
+ if use prefix ; then
+ # Set a hook to check for each detected library whether it actually works.
+ export libscheck="
+ ( echo 'main(){}' > '${T}'/conftest.c &&
+ $(tc-getCC) -o '${T}'/conftest '${T}'/conftest.c -l\$thislib >/dev/null 2>/dev/null
+ ) || xxx=/dev/null"
+
+ # Use all host paths that might contain useful stuff, the hook above will filter out bad choices.
+ local paths="/lib/*-linux-gnu /usr/lib/*-linux-gnu /lib64 /lib/64 /usr/lib64 /usr/lib/64 /lib32 /usr/lib32 /lib /usr/lib"
+ myconf "-Dlibpth=${EPREFIX}/$(get_libdir) ${EPREFIX}/usr/$(get_libdir) ${paths}"
+ elif [[ $(get_libdir) != "lib" ]] ; then
+ # We need to use " and not ', as the written config.sh use ' ...
+ myconf "-Dlibpth=/usr/local/$(get_libdir) /$(get_libdir) /usr/$(get_libdir)"
+ fi
+
+ # don't try building ODBM, bug #354453
+ disabled_extensions="ODBM_File"
+
+ if ! use gdbm ; then
+ # workaround for bug #157774: don't try building GDBM related stuff with USE="-gdbm"
+ disabled_extensions="${disabled_extensions} GDBM_File NDBM_File"
+ fi
+
+ myconf -Dnoextensions="${disabled_extensions}"
+
+ echo Configuring Perl as follows:
+ echo sh Configure \
+ -des \
+ -Duseshrplib \
+ -Darchname="${myarch}" \
+ -Dcc="$(tc-getCC)" \
+ -Doptimize="${CFLAGS}" \
+ -Dldflags="${LDFLAGS}" \
+ -Dprefix="${EPREFIX}"'/usr' \
+ -Dinstallprefix="${EPREFIX}"'/usr' \
+ -Dsiteprefix="${EPREFIX}"'/usr/local' \
+ -Dvendorprefix="${EPREFIX}"'/usr' \
+ -Dscriptdir="${EPREFIX}"'/usr/bin' \
+ -Dprivlib="${EPREFIX}${PRIV_LIB}" \
+ -Darchlib="${EPREFIX}${ARCH_LIB}" \
+ -Dsitelib="${EPREFIX}${SITE_LIB}" \
+ -Dsitearch="${EPREFIX}${SITE_ARCH}" \
+ -Dvendorlib="${EPREFIX}${VENDOR_LIB}" \
+ -Dvendorarch="${EPREFIX}${VENDOR_ARCH}" \
+ -Dman1dir="${EPREFIX}"/usr/share/man/man1 \
+ -Dman3dir="${EPREFIX}"/usr/share/man/man3 \
+ -Dsiteman1dir="${EPREFIX}"/usr/local/man/man1 \
+ -Dsiteman3dir="${EPREFIX}"/usr/local/man/man3 \
+ -Dvendorman1dir="${EPREFIX}"/usr/share/man/man1 \
+ -Dvendorman3dir="${EPREFIX}"/usr/share/man/man3 \
+ -Dman1ext='1' \
+ -Dman3ext='3pm' \
+ -Dlibperl="${LIBPERL}" \
+ -Dlocincpth="${EPREFIX}"'/usr/include ' \
+ -Dglibpth="${EPREFIX}/$(get_libdir) ${EPREFIX}/usr/$(get_libdir)"' ' \
+ -Duselargefiles \
+ -Dd_semctl_semun \
+ -Dcf_by='Gentoo' \
+ -Dmyhostname='localhost' \
+ -Dperladmin='root@localhost' \
+ -Dinstallusrbinperl='n' \
+ -Ud_csh \
+ -Uusenm \
+ "${myconf[@]}"
+
+ sh Configure \
+ -des \
+ -Duseshrplib \
+ -Darchname="${myarch}" \
+ -Dcc="$(tc-getCC)" \
+ -Doptimize="${CFLAGS}" \
+ -Dldflags="${LDFLAGS}" \
+ -Dprefix="${EPREFIX}"'/usr' \
+ -Dinstallprefix="${EPREFIX}"'/usr' \
+ -Dsiteprefix="${EPREFIX}"'/usr/local' \
+ -Dvendorprefix="${EPREFIX}"'/usr' \
+ -Dscriptdir="${EPREFIX}"'/usr/bin' \
+ -Dprivlib="${EPREFIX}${PRIV_LIB}" \
+ -Darchlib="${EPREFIX}${ARCH_LIB}" \
+ -Dsitelib="${EPREFIX}${SITE_LIB}" \
+ -Dsitearch="${EPREFIX}${SITE_ARCH}" \
+ -Dvendorlib="${EPREFIX}${VENDOR_LIB}" \
+ -Dvendorarch="${EPREFIX}${VENDOR_ARCH}" \
+ -Dman1dir="${EPREFIX}"/usr/share/man/man1 \
+ -Dman3dir="${EPREFIX}"/usr/share/man/man3 \
+ -Dsiteman1dir="${EPREFIX}"/usr/local/man/man1 \
+ -Dsiteman3dir="${EPREFIX}"/usr/local/man/man3 \
+ -Dvendorman1dir="${EPREFIX}"/usr/share/man/man1 \
+ -Dvendorman3dir="${EPREFIX}"/usr/share/man/man3 \
+ -Dman1ext='1' \
+ -Dman3ext='3pm' \
+ -Dlibperl="${LIBPERL}" \
+ -Dlocincpth="${EPREFIX}"'/usr/include ' \
+ -Dglibpth="${EPREFIX}/$(get_libdir) ${EPREFIX}/usr/$(get_libdir)"' ' \
+ -Duselargefiles \
+ -Dd_semctl_semun \
+ -Dcf_by='Gentoo' \
+ -Dmyhostname='localhost' \
+ -Dperladmin='root@localhost' \
+ -Dinstallusrbinperl='n' \
+ -Ud_csh \
+ -Uusenm \
+ "${myconf[@]}" || die "Unable to configure"
+}
diff --git a/dev-lang/perl/files/eblits/src_install-v50240001.eblit b/dev-lang/perl/files/eblits/src_install-v50240001.eblit
new file mode 100644
index 0000000..fafff82
--- /dev/null
+++ b/dev-lang/perl/files/eblits/src_install-v50240001.eblit
@@ -0,0 +1,51 @@
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+eblit-perl-src_install() {
+ local i
+ local coredir="${ARCH_LIB}/CORE"
+
+ emake DESTDIR="${D}" install
+
+ rm -f "${ED}/usr/bin/perl${MY_PV}"
+ ln -s perl "${ED}"/usr/bin/perl${MY_PV} || die
+
+ if ! tc-is-static-only ; then
+ dolib.so "${ED}"${coredir}/${LIBPERL}
+ rm -f "${ED}"${coredir}/${LIBPERL}
+ ln -sf ${LIBPERL} "${ED}"/usr/$(get_libdir)/libperl$(get_libname ${SHORT_PV}) || die
+ ln -sf ${LIBPERL} "${ED}"/usr/$(get_libdir)/libperl$(get_libname) || die
+ ln -sf ../../../../../$(get_libdir)/${LIBPERL} "${ED}"${coredir}/${LIBPERL} || die
+ ln -sf ../../../../../$(get_libdir)/${LIBPERL} "${ED}"${coredir}/libperl$(get_libname ${SHORT_PV}) || die
+ ln -sf ../../../../../$(get_libdir)/${LIBPERL} "${ED}"${coredir}/libperl$(get_libname) || die
+ fi
+
+ rm -rf "${ED}"/usr/share/man/man3 || die "Unable to remove module man pages"
+
+ # This removes ${D} from Config.pm
+ for i in $(find "${D}" -iname "Config.pm" ) ; do
+ einfo "Removing ${D} from ${i}..."
+ sed -i -e "s:${D}::" "${i}" || die "Sed failed"
+ done
+
+ find "${ED}" -type f -name .packlist -delete || die
+
+ dodoc Changes* README AUTHORS
+
+ if use doc ; then
+ # HTML Documentation
+ # We expect errors, warnings, and such with the following.
+
+ dodir /usr/share/doc/${PF}/html
+ LD_LIBRARY_PATH=. ./perl installhtml \
+ --podroot='.' \
+ --podpath='lib:ext:pod:vms' \
+ --recurse \
+ --htmldir="${ED}/usr/share/doc/${PF}/html"
+ fi
+
+ [[ -d ${ED}/usr/local ]] && rm -r "${ED}"/usr/local
+
+ dual_scripts
+}
diff --git a/dev-lang/perl/perl-5.24.0.ebuild b/dev-lang/perl/perl-5.24.0.ebuild
index 61cb52f..53bf104 100644
--- a/dev-lang/perl/perl-5.24.0.ebuild
+++ b/dev-lang/perl/perl-5.24.0.ebuild
@@ -104,7 +104,7 @@ eblit-run() {
src_prepare() { eblit-run src_prepare v50240001 ; }
-src_configure() { eblit-run src_configure v50180002 ; }
+src_configure() { eblit-run src_configure v50240001 ; }
#src_compile() { eblit-run src_compile v50160001 ; }
@@ -113,7 +113,7 @@ src_test() {
eblit-run src_test v50160001 ;
}
-src_install() { eblit-run src_install v50200001 ; }
+src_install() { eblit-run src_install v50240001 ; }
# FILESDIR might not be available during binpkg install
# FIXME: version passing
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: dev-lang/perl/, dev-lang/perl/files/eblits/
@ 2016-06-03 23:29 Andreas Hüttel
0 siblings, 0 replies; 4+ messages in thread
From: Andreas Hüttel @ 2016-06-03 23:29 UTC (permalink / raw
To: gentoo-commits
commit: c5cd8381c25b1b4943e7b3eec5466f053d360ae6
Author: Andreas K. Hüttel <dilfridge <AT> gentoo <DOT> org>
AuthorDate: Fri Jun 3 23:28:31 2016 +0000
Commit: Andreas Hüttel <dilfridge <AT> gentoo <DOT> org>
CommitDate: Fri Jun 3 23:29:44 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c5cd8381
dev-lang/perl: Add revbump (unkeyworded, work in progress) for adding some patches. Add fix for bug 584890 by Benda Xu.
Package-Manager: portage-2.3.0_rc1
dev-lang/perl/files/eblits/common-v50240002.eblit | 71 ++++++++
.../files/eblits/src_configure-v50240002.eblit | 192 +++++++++++++++++++++
dev-lang/perl/perl-5.24.0-r1.ebuild | 126 ++++++++++++++
3 files changed, 389 insertions(+)
diff --git a/dev-lang/perl/files/eblits/common-v50240002.eblit b/dev-lang/perl/files/eblits/common-v50240002.eblit
new file mode 100644
index 0000000..94e01a2
--- /dev/null
+++ b/dev-lang/perl/files/eblits/common-v50240002.eblit
@@ -0,0 +1,71 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+src_remove_dual_file() {
+ local i pkg ver
+ pkg="$1"
+ ver="$2"
+ shift 2
+ case "${EBUILD_PHASE:-none}" in
+ postinst|postrm)
+ for i in "$@" ; do
+ alternatives_auto_makesym "${i}" "${i}-[0-9]*"
+ done
+ ;;
+ setup)
+ for i in "$@" ; do
+ if [[ -f ${EROOT}${i} && ! -h ${EROOT}${i} ]] ; then
+ has_version ${pkg} && ewarn "You must reinstall ${pkg} !"
+ break
+ fi
+ done
+ ;;
+ install)
+ for i in "$@" ; do
+ if ! [[ -f "${ED}"${i} ]] ; then
+ ewarn "${i} does not exist!"
+ continue
+ fi
+ mv "${ED}"${i}{,-${ver}-${P}} || die
+ done
+ ;;
+ esac
+}
+
+src_remove_dual_man() {
+ local i pkg ver ff
+ pkg="$1"
+ ver="$2"
+ shift 2
+ case "${EBUILD_PHASE:-none}" in
+ postinst|postrm)
+ for i in "$@" ; do
+ ff=`echo "${EROOT}${i%.[0-9]}-${ver}-${P}${i#${i%.[0-9]}}"*`
+ ff=${ff##*${i#${i%.[0-9]}}}
+ alternatives_auto_makesym "${i}${ff}" "${i%.[0-9]}-[0-9]*"
+ done
+ ;;
+ install)
+ for i in "$@" ; do
+ if ! [[ -f "${ED}"${i} ]] ; then
+ ewarn "${i} does not exist!"
+ continue
+ fi
+ mv "${ED}"${i} "${ED}"${i%.[0-9]}-${ver}-${P}${i#${i%.[0-9]}} || die
+ done
+ ;;
+ esac
+}
+
+src_remove_dual() {
+ local i pkg ver
+ pkg="$1"
+ ver="$2"
+ shift 2
+ for i in "$@" ; do
+ src_remove_dual_file "${pkg}" "${ver}" "/usr/bin/${i}"
+ src_remove_dual_man "${pkg}" "${ver}" "/usr/share/man/man1/${i}.1"
+ done
+}
+
diff --git a/dev-lang/perl/files/eblits/src_configure-v50240002.eblit b/dev-lang/perl/files/eblits/src_configure-v50240002.eblit
new file mode 100644
index 0000000..058171e
--- /dev/null
+++ b/dev-lang/perl/files/eblits/src_configure-v50240002.eblit
@@ -0,0 +1,192 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+myconf() {
+ # the myconf array is declared in src_configure
+ myconf=( "${myconf[@]}" "$@" )
+}
+
+eblit-perl-src_configure() {
+ declare -a myconf
+
+ export LC_ALL="C"
+ [[ ${COLUMNS:-1} -ge 1 ]] || unset COLUMNS # bug #394091
+
+ # some arches and -O do not mix :)
+ use ppc && replace-flags -O? -O1
+ # Perl has problems compiling with -Os in your flags with glibc
+ use elibc_uclibc || replace-flags "-Os" "-O2"
+ # This flag makes compiling crash in interesting ways
+ filter-flags "-malign-double"
+ # Fixes bug #97645
+ use ppc && filter-flags "-mpowerpc-gpopt"
+ # Fixes bug #143895 on gcc-4.1.1
+ filter-flags "-fsched2-use-superblocks"
+
+ use sparc && myconf -Ud_longdbl
+
+ export BUILD_BZIP2=0
+ export BZIP2_INCLUDE=${EPREFIX}/usr/include
+ export BZIP2_LIB=${EPREFIX}/usr/$(get_libdir)
+
+ export BUILD_ZLIB=False
+ export ZLIB_INCLUDE=${EPREFIX}/usr/include
+ export ZLIB_LIB=${EPREFIX}/usr/$(get_libdir)
+
+ # allow either gdbm to provide ndbm (in <gdbm/ndbm.h>) or db1
+
+ myndbm='U'
+ mygdbm='U'
+ mydb='U'
+
+ if use gdbm ; then
+ mygdbm='D'
+ myndbm='D'
+ fi
+ if use berkdb ; then
+ mydb='D'
+ has_version '=sys-libs/db-1*' && myndbm='D'
+ fi
+
+ myconf "-${myndbm}i_ndbm" "-${mygdbm}i_gdbm" "-${mydb}i_db"
+
+ if use alpha && [[ "$(tc-getCC)" = "ccc" ]] ; then
+ ewarn "Perl will not be built with berkdb support, use gcc if you needed it..."
+ myconf -Ui_db -Ui_ndbm
+ fi
+
+ use ithreads && myconf -Dusethreads
+
+ if use debug ; then
+ append-cflags "-g"
+ myconf -DDEBUGGING
+ elif [[ ${CFLAGS} == *-g* ]] ; then
+ myconf -DDEBUGGING=-g
+ else
+ myconf -DDEBUGGING=none
+ fi
+
+ if [[ -n ${PERL_OLDVERSEN} ]] ; then
+ local inclist=$(for v in ${PERL_OLDVERSEN}; do echo -n "${v}/${myarch}${mythreading} ${v} "; done )
+ myconf -Dinc_version_list="${inclist}"
+ fi
+
+ [[ ${ELIBC} == "FreeBSD" ]] && myconf "-Dlibc=/usr/$(get_libdir)/libc.a"
+
+ # Make sure we can do the final link #523730, need to set deployment
+ # target to override hardcoded 10.3 which breaks on modern OSX
+ [[ ${CHOST} == *-darwin* ]] && \
+ myconf "-Dld=env MACOSX_DEPLOYMENT_TARGET=${MACOSX_DEPLOYMENT_TARGET} $(tc-getCC)"
+
+ # Prefix: the host system needs not to follow Gentoo multilib stuff, and in
+ # Prefix itself we don't do multilib either, so make sure perl can find
+ # something compatible.
+ if use prefix ; then
+ # Set a hook to check for each detected library whether it actually works.
+ export libscheck="
+ ( echo 'main(){}' > '${T}'/conftest.c &&
+ $(tc-getCC) -o '${T}'/conftest '${T}'/conftest.c -l\$thislib >/dev/null 2>/dev/null
+ ) || xxx=/dev/null"
+
+ # Use all host paths that might contain useful stuff, the hook above will filter out bad choices.
+ local paths="/lib/*-linux-gnu /usr/lib/*-linux-gnu /lib64 /lib/64 /usr/lib64 /usr/lib/64 /lib32 /usr/lib32 /lib /usr/lib"
+ myconf "-Dlibpth=${EPREFIX}/$(get_libdir) ${EPREFIX}/usr/$(get_libdir) ${paths}"
+ elif [[ $(get_libdir) != "lib" ]] ; then
+ # We need to use " and not ', as the written config.sh use ' ...
+ myconf "-Dlibpth=/usr/local/$(get_libdir) /$(get_libdir) /usr/$(get_libdir)"
+ fi
+
+ # don't try building ODBM, bug #354453
+ disabled_extensions="ODBM_File"
+
+ if ! use gdbm ; then
+ # workaround for bug #157774: don't try building GDBM related stuff with USE="-gdbm"
+ disabled_extensions="${disabled_extensions} GDBM_File NDBM_File"
+ fi
+
+ myconf -Dnoextensions="${disabled_extensions}"
+
+ echo Configuring Perl as follows:
+ echo sh Configure \
+ -des \
+ -Duseshrplib \
+ -Darchname="${myarch}" \
+ -Dcc="$(tc-getCC)" \
+ -Doptimize="${CFLAGS}" \
+ -Dldflags="${LDFLAGS}" \
+ -Dprefix="${EPREFIX}"'/usr' \
+ -Dinstallprefix="${EPREFIX}"'/usr' \
+ -Dsiteprefix="${EPREFIX}"'/usr/local' \
+ -Dvendorprefix="${EPREFIX}"'/usr' \
+ -Dscriptdir="${EPREFIX}"'/usr/bin' \
+ -Dprivlib="${EPREFIX}${PRIV_LIB}" \
+ -Darchlib="${EPREFIX}${ARCH_LIB}" \
+ -Dsitelib="${EPREFIX}${SITE_LIB}" \
+ -Dsitearch="${EPREFIX}${SITE_ARCH}" \
+ -Dvendorlib="${EPREFIX}${VENDOR_LIB}" \
+ -Dvendorarch="${EPREFIX}${VENDOR_ARCH}" \
+ -Dman1dir="${EPREFIX}"/usr/share/man/man1 \
+ -Dman3dir="${EPREFIX}"/usr/share/man/man3 \
+ -Dsiteman1dir="${EPREFIX}"/usr/local/man/man1 \
+ -Dsiteman3dir="${EPREFIX}"/usr/local/man/man3 \
+ -Dvendorman1dir="${EPREFIX}"/usr/share/man/man1 \
+ -Dvendorman3dir="${EPREFIX}"/usr/share/man/man3 \
+ -Dman1ext='1' \
+ -Dman3ext='3pm' \
+ -Dlibperl="${LIBPERL}" \
+ -Dlocincpth="${EPREFIX}"'/usr/include ' \
+ -Dglibpth="${EPREFIX}/$(get_libdir) ${EPREFIX}/usr/$(get_libdir)"' ' \
+ -Duselargefiles \
+ -Dd_semctl_semun \
+ -Dcf_by='Gentoo' \
+ -Dmyhostname='localhost' \
+ -Dperladmin='root@localhost' \
+ -Dinstallusrbinperl='n' \
+ -Ud_csh \
+ -Dsh="${EPREFIX}"/bin/sh \
+ -Dtargetsh="${EPREFIX}"/bin/sh \
+ -Uusenm \
+ "${myconf[@]}"
+
+ sh Configure \
+ -des \
+ -Duseshrplib \
+ -Darchname="${myarch}" \
+ -Dcc="$(tc-getCC)" \
+ -Doptimize="${CFLAGS}" \
+ -Dldflags="${LDFLAGS}" \
+ -Dprefix="${EPREFIX}"'/usr' \
+ -Dinstallprefix="${EPREFIX}"'/usr' \
+ -Dsiteprefix="${EPREFIX}"'/usr/local' \
+ -Dvendorprefix="${EPREFIX}"'/usr' \
+ -Dscriptdir="${EPREFIX}"'/usr/bin' \
+ -Dprivlib="${EPREFIX}${PRIV_LIB}" \
+ -Darchlib="${EPREFIX}${ARCH_LIB}" \
+ -Dsitelib="${EPREFIX}${SITE_LIB}" \
+ -Dsitearch="${EPREFIX}${SITE_ARCH}" \
+ -Dvendorlib="${EPREFIX}${VENDOR_LIB}" \
+ -Dvendorarch="${EPREFIX}${VENDOR_ARCH}" \
+ -Dman1dir="${EPREFIX}"/usr/share/man/man1 \
+ -Dman3dir="${EPREFIX}"/usr/share/man/man3 \
+ -Dsiteman1dir="${EPREFIX}"/usr/local/man/man1 \
+ -Dsiteman3dir="${EPREFIX}"/usr/local/man/man3 \
+ -Dvendorman1dir="${EPREFIX}"/usr/share/man/man1 \
+ -Dvendorman3dir="${EPREFIX}"/usr/share/man/man3 \
+ -Dman1ext='1' \
+ -Dman3ext='3pm' \
+ -Dlibperl="${LIBPERL}" \
+ -Dlocincpth="${EPREFIX}"'/usr/include ' \
+ -Dglibpth="${EPREFIX}/$(get_libdir) ${EPREFIX}/usr/$(get_libdir)"' ' \
+ -Duselargefiles \
+ -Dd_semctl_semun \
+ -Dcf_by='Gentoo' \
+ -Dmyhostname='localhost' \
+ -Dperladmin='root@localhost' \
+ -Dinstallusrbinperl='n' \
+ -Ud_csh \
+ -Dsh="${EPREFIX}"/bin/sh \
+ -Dtargetsh="${EPREFIX}"/bin/sh \
+ -Uusenm \
+ "${myconf[@]}" || die "Unable to configure"
+}
diff --git a/dev-lang/perl/perl-5.24.0-r1.ebuild b/dev-lang/perl/perl-5.24.0-r1.ebuild
new file mode 100644
index 0000000..1f34989
--- /dev/null
+++ b/dev-lang/perl/perl-5.24.0-r1.ebuild
@@ -0,0 +1,126 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=6
+
+inherit eutils alternatives flag-o-matic toolchain-funcs multilib multiprocessing
+
+PATCH_VER=1
+
+PERL_OLDVERSEN=""
+MODULE_AUTHOR=RJBS
+
+SHORT_PV="${PV%.*}"
+MY_P="perl-${PV/_rc/-RC}"
+MY_PV="${PV%_rc*}"
+
+DESCRIPTION="Larry Wall's Practical Extraction and Report Language"
+
+SRC_URI="
+ mirror://cpan/src/5.0/${MY_P}.tar.bz2
+ mirror://cpan/authors/id/${MODULE_AUTHOR:0:1}/${MODULE_AUTHOR:0:2}/${MODULE_AUTHOR}/${MY_P}.tar.bz2
+ mirror://gentoo/${MY_P}-patches-${PATCH_VER}.tar.xz
+ https://dev.gentoo.org/~dilfridge/distfiles/${MY_P}-patches-${PATCH_VER}.tar.xz
+"
+HOMEPAGE="http://www.perl.org/"
+
+LICENSE="|| ( Artistic GPL-1+ )"
+SLOT="0/${SHORT_PV}"
+#KEYWORDS="~alpha ~amd64 ~amd64-fbsd ~amd64-linux ~arm ~arm64 ~hppa ~hppa-hpux ~ia64 ~ia64-hpux ~ia64-linux ~m68k ~m68k-mint ~mips ~ppc ~ppc64 ~ppc-aix ~ppc-macos ~s390 ~sh ~sparc ~sparc64-solaris ~sparc-solaris ~x64-freebsd ~x64-macos ~x64-solaris ~x86 ~x86-fbsd ~x86-freebsd ~x86-interix ~x86-linux ~x86-macos ~x86-solaris"
+IUSE="berkdb debug doc gdbm ithreads"
+
+RDEPEND="
+ berkdb? ( sys-libs/db:* )
+ gdbm? ( >=sys-libs/gdbm-1.8.3 )
+ app-arch/bzip2
+ sys-libs/zlib
+"
+DEPEND="${RDEPEND}
+ !prefix? ( elibc_FreeBSD? ( sys-freebsd/freebsd-mk-defs ) )
+"
+PDEPEND="
+ >=app-admin/perl-cleaner-2.5
+ >=virtual/perl-File-Temp-0.230.400-r2
+ >=virtual/perl-Data-Dumper-2.154.0
+ virtual/perl-Test-Harness
+"
+# bug 390719, bug 523624
+# virtual/perl-Test-Harness is here for the bundled ExtUtils::MakeMaker
+
+S="${WORKDIR}/${MY_P}"
+
+dual_scripts() {
+ src_remove_dual perl-core/Archive-Tar 2.40.0 ptar ptardiff ptargrep
+ src_remove_dual perl-core/Digest-SHA 5.950.0 shasum
+ src_remove_dual perl-core/CPAN 2.110.0 cpan
+ src_remove_dual perl-core/Encode 2.800.0 enc2xs piconv
+ src_remove_dual perl-core/ExtUtils-MakeMaker 7.100.100_rc instmodsh
+ src_remove_dual perl-core/ExtUtils-ParseXS 3.310.0 xsubpp
+ src_remove_dual perl-core/IO-Compress 2.69.0 zipdetails
+ src_remove_dual perl-core/JSON-PP 2.273.0 json_pp
+ src_remove_dual perl-core/Module-CoreList 5.201.605.60 corelist
+ src_remove_dual perl-core/Pod-Parser 1.630.0 pod2usage podchecker podselect
+ src_remove_dual perl-core/Pod-Perldoc 3.250.200_rc perldoc
+ src_remove_dual perl-core/Test-Harness 3.360.0 prove
+ src_remove_dual perl-core/podlators 4.70.0 pod2man pod2text
+ src_remove_dual_man perl-core/podlators 4.70.0 /usr/share/man/man1/perlpodstyle.1
+}
+
+# eblit-include [--skip] <function> [version]
+eblit-include() {
+ local skipable=false
+ [[ $1 == "--skip" ]] && skipable=true && shift
+ [[ $1 == pkg_* ]] && skipable=true
+
+ local e v func=$1 ver=$2
+ [[ -z ${func} ]] && die "Usage: eblit-include <function> [version]"
+ for v in ${ver:+-}${ver} -${PVR} -${PV} "" ; do
+ e="${FILESDIR}/eblits/${func}${v}.eblit"
+ if [[ -e ${e} ]] ; then
+ . "${e}"
+ return 0
+ fi
+ done
+ ${skipable} && return 0
+ die "Could not locate requested eblit '${func}' in ${FILESDIR}/eblits/"
+}
+
+# eblit-run-maybe <function>
+# run the specified function if it is defined
+eblit-run-maybe() {
+ [[ $(type -t "$@") == "function" ]] && "$@"
+}
+
+# eblit-run <function> [version]
+# aka: src_unpack() { eblit-run src_unpack ; }
+eblit-run() {
+ eblit-include --skip common "${*:2}"
+ eblit-include "$@"
+ eblit-run-maybe eblit-$1-pre
+ eblit-${PN}-$1
+ eblit-run-maybe eblit-$1-post
+}
+
+src_prepare() { eblit-run src_prepare v50240001 ; }
+
+src_configure() { eblit-run src_configure v50240002 ; }
+
+#src_compile() { eblit-run src_compile v50160001 ; }
+
+src_test() {
+ export NO_GENTOO_NETWORK_TESTS=1;
+ eblit-run src_test v50160001 ;
+}
+
+src_install() { eblit-run src_install v50240001 ; }
+
+# FILESDIR might not be available during binpkg install
+# FIXME: version passing
+for x in setup {pre,post}{inst,rm} ; do
+ e="${FILESDIR}/eblits/pkg_${x}-v50240001.eblit"
+ if [[ -e ${e} ]] ; then
+ . "${e}"
+ eval "pkg_${x}() { eblit-run pkg_${x} v50240001 ; }"
+ fi
+done
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: dev-lang/perl/, dev-lang/perl/files/eblits/
@ 2016-06-03 23:50 Andreas Hüttel
0 siblings, 0 replies; 4+ messages in thread
From: Andreas Hüttel @ 2016-06-03 23:50 UTC (permalink / raw
To: gentoo-commits
commit: 24682fa7ca762c19de50999d2f93f9969c5b2e5a
Author: Gwendal Grignou <gwendal <AT> chromium <DOT> org>
AuthorDate: Fri Jun 3 23:42:08 2016 +0000
Commit: Andreas Hüttel <dilfridge <AT> gentoo <DOT> org>
CommitDate: Fri Jun 3 23:50:38 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=24682fa7
dev-lang/perl: Add patchlevel-gentoo to perl MANIFEST
To allow miniperl compilation, patchlevel-gentoo.h must be in the MANIFEST.
Configure uses this file to create the /host symlinks.
Signed-off-by: Gwendal Grignou <gwendal <AT> chromium.org>
Comment from Gentoo perl team: Being nice here and adding this commit which
ended up without any further reasons or docs in our mailbox. I can't see how it
could hurt. I can't really see any problem that it's supposed to fix
either. Hey chromium team, more words please next time!
.../perl/files/eblits/src_prepare-v50240002.eblit | 74 ++++++++++++++++++++++
dev-lang/perl/perl-5.24.0-r1.ebuild | 2 +-
2 files changed, 75 insertions(+), 1 deletion(-)
diff --git a/dev-lang/perl/files/eblits/src_prepare-v50240002.eblit b/dev-lang/perl/files/eblits/src_prepare-v50240002.eblit
new file mode 100644
index 0000000..b30b1a5
--- /dev/null
+++ b/dev-lang/perl/files/eblits/src_prepare-v50240002.eblit
@@ -0,0 +1,74 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+src_prepare_update_patchlevel_h() {
+ # Copied and modified from debian:
+ # Copyright 2011 Niko Tyni
+ # This program is free software; you can redistribute it and/or modify
+ # it under the same terms as Perl itself.
+ local patchdir="${WORKDIR}/patches"
+ local prefix
+ local patchoutput="patchlevel-gentoo.h"
+
+ [[ -f ${patchdir}/series ]] || return 0
+
+while read patch
+do
+ patchname=$(echo $patch | sed 's/\.diff$//')
+ < $patchdir/$patch sed -e '/^Subject:/ { N; s/\n / / }' | sed -n -e '
+
+ # massage the patch headers
+ s|^Bug: .*https\?://rt\.perl\.org/.*id=\(.*\).*|[perl #\1]|; tprepend;
+ s|^Bug: .*https\?://rt\.cpan\.org/.*id=\(.*\).*|[rt.cpan.org #\1]|; tprepend;
+ s|^Bug-Gentoo: ||; tprepend;
+ s/^\(Subject\|Description\): //; tappend;
+ s|^Origin: .*http://perl5\.git\.perl\.org/perl\.git/commit\(diff\)\?/\(.......\).*|[\2]|; tprepend;
+
+ # post-process at the end of input
+ $ { x;
+ # include the version number in the patchlevel.h description (if available)
+ s/List packaged patches/&'" for ${PF}(#${PATCH_VER})"'/;
+
+ # escape any backslashes and double quotes
+ s|\\|\\\\|g; s|"|\\"|g;
+
+ # add a prefix
+ s|^|\t,"'"$prefix$patchname"' - |;
+ # newlines away
+ s/\n/ /g; s/ */ /g;
+ # add a suffix
+ s/ *$/"/; p
+ };
+ # stop all processing
+ d;
+ # label: append to the hold space
+ :append H; d;
+ # label: prepend to the hold space
+ :prepend x; H; d;
+ '
+done < "${WORKDIR}"/patches/series > "${S}/${patchoutput}"
+echo "${patchoutput}" >> "${S}/MANIFEST"
+}
+
+eblit-perl-src_prepare() {
+ local patch
+ EPATCH_OPTS+=" -p1"
+ einfo "Applying patches from ${MY_P}-${PATCH_VER} ..."
+ while read patch ; do
+ EPATCH_SINGLE_MSG=" ${patch} ..."
+ epatch "${WORKDIR}"/patches/${patch}
+ done < "${WORKDIR}"/patches/series
+
+ src_prepare_update_patchlevel_h
+
+ # pod/perltoc.pod fails
+ # lib/ExtUtils/t/Embed.t fails
+ if ! tc-is-static-only ; then
+ ln -s ${LIBPERL} libperl$(get_libname ${SHORT_PV}) || die
+ ln -s ${LIBPERL} libperl$(get_libname ) || die
+ fi
+
+ default
+}
+
diff --git a/dev-lang/perl/perl-5.24.0-r1.ebuild b/dev-lang/perl/perl-5.24.0-r1.ebuild
index 1f34989..d63e0dc 100644
--- a/dev-lang/perl/perl-5.24.0-r1.ebuild
+++ b/dev-lang/perl/perl-5.24.0-r1.ebuild
@@ -102,7 +102,7 @@ eblit-run() {
eblit-run-maybe eblit-$1-post
}
-src_prepare() { eblit-run src_prepare v50240001 ; }
+src_prepare() { eblit-run src_prepare v50240002 ; }
src_configure() { eblit-run src_configure v50240002 ; }
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: dev-lang/perl/, dev-lang/perl/files/eblits/
@ 2016-09-16 21:26 Kent Fredric
0 siblings, 0 replies; 4+ messages in thread
From: Kent Fredric @ 2016-09-16 21:26 UTC (permalink / raw
To: gentoo-commits
commit: 14b8f77ff4496e6cf409259dd8530f55bd154f86
Author: Kent Fredric <kentnl <AT> gentoo <DOT> org>
AuthorDate: Fri Sep 16 20:47:53 2016 +0000
Commit: Kent Fredric <kentnl <AT> gentoo <DOT> org>
CommitDate: Fri Sep 16 21:19:51 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=14b8f77f
dev-lang/perl: Update upgrade prose to encourage depclean
Depcleans really do help a lot and you should do them lots.
Note: the 5.24.0-r1 version ( which is patched here ) is not displayed
to the user due to some mistakes made when flattening it, this will be
rectified in a future commit.
Note: Patching apparently "Old" eblits because due to a lack of clarity
on how eblits actually work, it turns out that all eblit-using
dev-lang/perl ebuilds are sourcing *BOTH* their own eblit entries *AND*
the eblit for v5016001!!.
The use of eblits here has made it impossible to clearly discern which
code is actually running, and that perl 5.22* and 5.20* actually work
at all is more a case of amazing amounts of good luck than actual
planning.
Package-Manager: portage-2.3.0
dev-lang/perl/files/eblits/pkg_setup-v50160001.eblit | 16 +++++++++++++---
dev-lang/perl/files/eblits/pkg_setup-v50220001.eblit | 16 ++++++++++++----
dev-lang/perl/files/eblits/pkg_setup-v50240001.eblit | 16 ++++++++++++----
dev-lang/perl/perl-5.24.0-r1.ebuild | 12 ++++++++++--
4 files changed, 47 insertions(+), 13 deletions(-)
diff --git a/dev-lang/perl/files/eblits/pkg_setup-v50160001.eblit b/dev-lang/perl/files/eblits/pkg_setup-v50160001.eblit
index a7b734f..e46ffc2 100644
--- a/dev-lang/perl/files/eblits/pkg_setup-v50160001.eblit
+++ b/dev-lang/perl/files/eblits/pkg_setup-v50160001.eblit
@@ -1,4 +1,4 @@
-# Copyright 1999-2013 Gentoo Foundation
+# Copyright 1999-2016 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Id$
@@ -48,8 +48,18 @@ check_rebuild() {
if has_version "<dev-lang/perl-${SHORT_PV}" ; then
echo ""
ewarn "UPDATE THE PERL MODULES:"
- ewarn "After updating dev-lang/perl you must reinstall"
- ewarn "the installed perl modules."
+ ewarn "After updating dev-lang/perl the installed Perl modules"
+ ewarn "have to be re-installed. In most cases, this is done automatically"
+ ewarn "by the package manager, but subsequent steps are still recommended"
+ ewarn "to ensure system consistency."
+ ewarn
+ ewarn "You should start with a depclean to remove any unused perl dependencies"
+ ewarn "that may confuse portage in future. Regular depcleans are also encouraged"
+ ewarn "as part of your regular update cycle, as that will keep perl upgrades working."
+ ewarn "Recommended: emerge --depclean -va"
+ ewarn
+ ewarn "You should then call perl-cleaner to clean up any old files and trigger any"
+ ewarn "remaining rebuilds portage may have missed."
ewarn "Use: perl-cleaner --all"
elif has_version dev-lang/perl ; then
# doesnot work
diff --git a/dev-lang/perl/files/eblits/pkg_setup-v50220001.eblit b/dev-lang/perl/files/eblits/pkg_setup-v50220001.eblit
index a2b0957..e46ffc2 100644
--- a/dev-lang/perl/files/eblits/pkg_setup-v50220001.eblit
+++ b/dev-lang/perl/files/eblits/pkg_setup-v50220001.eblit
@@ -1,4 +1,4 @@
-# Copyright 1999-2015 Gentoo Foundation
+# Copyright 1999-2016 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Id$
@@ -48,10 +48,18 @@ check_rebuild() {
if has_version "<dev-lang/perl-${SHORT_PV}" ; then
echo ""
ewarn "UPDATE THE PERL MODULES:"
- ewarn "After updating dev-lang/perl the installed Perl modules will"
+ ewarn "After updating dev-lang/perl the installed Perl modules"
ewarn "have to be re-installed. In most cases, this is done automatically"
- ewarn "by the package manager, but you should still call perl-cleaner to"
- ewarn "make sure your system is consistent."
+ ewarn "by the package manager, but subsequent steps are still recommended"
+ ewarn "to ensure system consistency."
+ ewarn
+ ewarn "You should start with a depclean to remove any unused perl dependencies"
+ ewarn "that may confuse portage in future. Regular depcleans are also encouraged"
+ ewarn "as part of your regular update cycle, as that will keep perl upgrades working."
+ ewarn "Recommended: emerge --depclean -va"
+ ewarn
+ ewarn "You should then call perl-cleaner to clean up any old files and trigger any"
+ ewarn "remaining rebuilds portage may have missed."
ewarn "Use: perl-cleaner --all"
elif has_version dev-lang/perl ; then
# doesnot work
diff --git a/dev-lang/perl/files/eblits/pkg_setup-v50240001.eblit b/dev-lang/perl/files/eblits/pkg_setup-v50240001.eblit
index 9ce8e99..8757944 100644
--- a/dev-lang/perl/files/eblits/pkg_setup-v50240001.eblit
+++ b/dev-lang/perl/files/eblits/pkg_setup-v50240001.eblit
@@ -1,4 +1,4 @@
-# Copyright 1999-2015 Gentoo Foundation
+# Copyright 1999-2016 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Id$
@@ -46,10 +46,18 @@ check_rebuild() {
if has_version "<dev-lang/perl-${SHORT_PV}" ; then
echo ""
ewarn "UPDATE THE PERL MODULES:"
- ewarn "After updating dev-lang/perl the installed Perl modules will"
+ ewarn "After updating dev-lang/perl the installed Perl modules"
ewarn "have to be re-installed. In most cases, this is done automatically"
- ewarn "by the package manager, but you should still call perl-cleaner to"
- ewarn "make sure your system is consistent."
+ ewarn "by the package manager, but subsequent steps are still recommended"
+ ewarn "to ensure system consistency."
+ ewarn
+ ewarn "You should start with a depclean to remove any unused perl dependencies"
+ ewarn "that may confuse portage in future. Regular depcleans are also encouraged"
+ ewarn "as part of your regular update cycle, as that will keep perl upgrades working."
+ ewarn "Recommended: emerge --depclean -va"
+ ewarn
+ ewarn "You should then call perl-cleaner to clean up any old files and trigger any"
+ ewarn "remaining rebuilds portage may have missed."
ewarn "Use: perl-cleaner --all"
elif has_version dev-lang/perl ; then
if ( use ithreads && ! has_version dev-lang/perl[ithreads] ) || \
diff --git a/dev-lang/perl/perl-5.24.0-r1.ebuild b/dev-lang/perl/perl-5.24.0-r1.ebuild
index 0bd6710..3086c8e 100644
--- a/dev-lang/perl/perl-5.24.0-r1.ebuild
+++ b/dev-lang/perl/perl-5.24.0-r1.ebuild
@@ -73,8 +73,16 @@ check_rebuild() {
ewarn "UPDATE THE PERL MODULES:"
ewarn "After updating dev-lang/perl the installed Perl modules"
ewarn "have to be re-installed. In most cases, this is done automatically"
- ewarn "by the package manager, but you should still call perl-cleaner to"
- ewarn "make sure your system is consistent."
+ ewarn "by the package manager, but subsequent steps are still recommended"
+ ewarn "to ensure system consistency."
+ ewarn
+ ewarn "You should start with a depclean to remove any unused perl dependencies"
+ ewarn "that may confuse portage in future. Regular depcleans are also encouraged"
+ ewarn "as part of your regular update cycle, as that will keep perl upgrades working."
+ ewarn "Recommended: emerge --depclean -va"
+ ewarn
+ ewarn "You should then call perl-cleaner to clean up any old files and trigger any"
+ ewarn "remaining rebuilds portage may have missed."
ewarn "Use: perl-cleaner --all"
elif has_version dev-lang/perl ; then
if ( use ithreads && ! has_version dev-lang/perl[ithreads] ) || \
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-09-16 21:26 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-09-16 21:26 [gentoo-commits] repo/gentoo:master commit in: dev-lang/perl/, dev-lang/perl/files/eblits/ Kent Fredric
-- strict thread matches above, loose matches on Subject: below --
2016-06-03 23:50 Andreas Hüttel
2016-06-03 23:29 Andreas Hüttel
2016-05-15 21:45 Andreas Hüttel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox