[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

[Kristian Fiskerstrand]

commit:     93a0cd0f6d9c59d670621918449f7c5aec0b3b93
Author:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
AuthorDate: Mon Sep 21 19:45:06 2015 +0000
Commit:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
CommitDate: Mon Sep 21 19:45:29 2015 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=93a0cd0f

net-misc/sks: Remove old 1.1.5

Package-Manager: portage-2.2.20.1

 net-misc/sks/sks-1.1.5.ebuild | 114 ------------------------------------------
 1 file changed, 114 deletions(-)

diff --git a/net-misc/sks/sks-1.1.5.ebuild b/net-misc/sks/sks-1.1.5.ebuild
deleted file mode 100644
index de9ce5e..0000000
--- a/net-misc/sks/sks-1.1.5.ebuild
+++ /dev/null
@@ -1,114 +0,0 @@
-# Copyright 1999-2014 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=5
-
-inherit multilib user readme.gentoo systemd
-
-DESCRIPTION="An OpenPGP keyserver which is decentralized and provides highly reliable synchronization"
-HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"
-SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~x86"
-IUSE="optimize test"
-DOC_CONTENTS="To get sks running, first build the database,
-start the databse, import atleast one key, then
-run a cleandb. See the sks man page for more information
-Typical DB_CONFIG file and sksconf has been installed
-in /var/lib/sks and can be used as templates by renaming
-to remove the .typical extension. The DB_CONFIG file has
-to be in place before doing the database build, or the BDB
-environment has to be manually cleared from both KDB and PTree.
-The same applies if you are upgrading to this version with an existing KDB/Ptree,
-using another version of BDB than 4.8; you need to clear the environment
-using e.g. db4.6_recover -h . and db4.6_checkpoint -1h . in both KDB and PTree
-Additionally a sample web interface has been installed as
-web.typical in /var/lib/sks that can be used by renaming it to web
-Important: It is strongly recommended to set up SKS behind a
-reverse proxy. Instructions on properly configuring SKS can be
-found at https://bitbucket.org/skskeyserver/sks-keyserver/wiki/Peering"
-
-DEPEND="dev-lang/ocaml
-	dev-ml/cryptokit
-	sys-libs/db:4.8"
-RDEPEND="${DEPEND}"
-
-pkg_setup() {
-	ebegin "Creating named group and user"
-	enewgroup sks
-	enewuser sks -1 -1 /var/lib/sks sks
-}
-
-src_prepare() {
-	cp Makefile.local.unused Makefile.local || die
-	sed -i \
-		-e "s:^BDBLIB=.*$:BDBLIB=-L/usr/$(get_libdir):g" \
-		-e "s:^BDBINCLUDE=.*$:BDBINCLUDE=-I/usr/include/db4.8/:g" \
-		-e "s:^LIBDB=.*$:LIBDB=-ldb-4.8:g" \
-		-e "s:^PREFIX=.*$:PREFIX=${D}/usr:g" \
-		-e "s:^MANDIR=.*$:MANDIR=${D}/usr/share/man:g" \
-		Makefile.local || die
-	sed -i \
-		-e 's:^CAMLINCLUDE= -I lib -I bdb$:CAMLINCLUDE= -I lib -I bdb -I +cryptokit:g' \
-		-e 's:-Werror-implicit-function-declaration::g' \
-		Makefile bdb/Makefile || die
-	sed -i \
-		-e 's:/usr/sbin/sks:/usr/bin/sks:g' \
-		sks_build.sh || die
-}
-
-src_compile() {
-	emake dep
-	# sks build fails with paralell build in module Bdb
-	emake -j1 all
-	if use optimize; then
-		emake all.bc
-	fi
-}
-
-src_test() {
-	./sks unit_test || die
-}
-
-src_install() {
-	if use optimize; then
-		emake install.bc
-		dosym /usr/bin/sks.bc usr/bin/sks
-		dosym /usr/bin/sks_add_mail.bc usr/bin/sks_add_mail
-	else
-		emake install
-	fi
-
-	dodoc README.md
-
-	newinitd "${FILESDIR}/sks-db.initd" sks-db
-	newinitd "${FILESDIR}/sks-recon.initd" sks-recon
-	newconfd "${FILESDIR}/sks.confd" sks
-	systemd_dounit "${FILESDIR}"/sks-db.service
-	systemd_dounit "${FILESDIR}"/sks-recon.service
-
-	dodir "/var/lib/sks/web.typical"
-	insinto /var/lib/sks
-	newins sampleConfig/DB_CONFIG DB_CONFIG.typical
-	newins sampleConfig/sksconf.typical sksconf.typical
-	insinto /var/lib/sks/web.typical
-	doins sampleWeb/HTML5/*
-
-	keepdir /var/lib/sks
-	readme.gentoo_create_doc
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-
-	if [[ -n ${REPLACING_VERSIONS} ]]; then
-		einfo "Note when upgrading from versions of SKS earlier than 1.1.4"
-		einfo "The default values for pagesize settings have changed. To continue"
-		einfo "using an existing DB without rebuilding, explicit settings have to be"
-		einfo "added to the sksconf file."
-		einfo "pagesize:       4"
-		einfo "ptree_pagesize: 1"
-	fi;
-}

[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

[Kristian Fiskerstrand]

commit:     d5f77dbc7cb61d54ff4b7230257537ba8fd2df29
Author:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
AuthorDate: Mon Sep 21 19:44:16 2015 +0000
Commit:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
CommitDate: Mon Sep 21 19:45:24 2015 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d5f77dbc

net-misc/sks-1.1.5-r1: Stable for amd64

Package-Manager: portage-2.2.20.1

 net-misc/sks/sks-1.1.5-r1.ebuild | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net-misc/sks/sks-1.1.5-r1.ebuild b/net-misc/sks/sks-1.1.5-r1.ebuild
index 873956d..f304141 100644
--- a/net-misc/sks/sks-1.1.5-r1.ebuild
+++ b/net-misc/sks/sks-1.1.5-r1.ebuild
@@ -11,7 +11,7 @@ HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"
 SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"
 LICENSE="GPL-2"
 SLOT="0"
-KEYWORDS="~amd64 ~x86"
+KEYWORDS="amd64 ~x86"
 IUSE="optimize test"
 DOC_CONTENTS="To get sks running, first build the database,
 start the databse, import atleast one key, then

[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

[Kristian Fiskerstrand]

commit:     186da5b5e4fccd3b0a93059d78f42add3c6629a5
Author:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
AuthorDate: Tue Feb 16 17:42:34 2016 +0000
Commit:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
CommitDate: Tue Feb 16 17:43:41 2016 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=186da5b5

net-misc/sks: Clean up old versions

Package-Manager: portage-2.2.27

 net-misc/sks/sks-1.1.5-r1.ebuild | 117 --------------------------------------
 net-misc/sks/sks-1.1.5-r2.ebuild | 118 ---------------------------------------
 2 files changed, 235 deletions(-)

diff --git a/net-misc/sks/sks-1.1.5-r1.ebuild b/net-misc/sks/sks-1.1.5-r1.ebuild
deleted file mode 100644
index f304141..0000000
--- a/net-misc/sks/sks-1.1.5-r1.ebuild
+++ /dev/null
@@ -1,117 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=5
-
-inherit multilib user readme.gentoo systemd
-
-DESCRIPTION="An OpenPGP keyserver which is decentralized and provides highly reliable synchronization"
-HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"
-SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ~x86"
-IUSE="optimize test"
-DOC_CONTENTS="To get sks running, first build the database,
-start the databse, import atleast one key, then
-run a cleandb. See the sks man page for more information
-Typical DB_CONFIG file and sksconf has been installed
-in /var/lib/sks and can be used as templates by renaming
-to remove the .typical extension. The DB_CONFIG file has
-to be in place before doing the database build, or the BDB
-environment has to be manually cleared from both KDB and PTree.
-The same applies if you are upgrading to this version with an existing KDB/Ptree,
-using another version of BDB than 4.8; you need to clear the environment
-using e.g. db4.6_recover -h . and db4.6_checkpoint -1h . in both KDB and PTree
-Additionally a sample web interface has been installed as
-web.typical in /var/lib/sks that can be used by renaming it to web
-Important: It is strongly recommended to set up SKS behind a
-reverse proxy. Instructions on properly configuring SKS can be
-found at https://bitbucket.org/skskeyserver/sks-keyserver/wiki/Peering"
-
-DEPEND="dev-lang/ocaml
-	dev-ml/cryptokit
-	sys-libs/db:4.8"
-RDEPEND="${DEPEND}"
-
-pkg_setup() {
-	ebegin "Creating named group and user"
-	enewgroup sks
-	enewuser sks -1 -1 /var/lib/sks sks
-}
-
-src_prepare() {
-	cp Makefile.local.unused Makefile.local || die
-	sed -i \
-		-e "s:^BDBLIB=.*$:BDBLIB=-L/usr/$(get_libdir):g" \
-		-e "s:^BDBINCLUDE=.*$:BDBINCLUDE=-I/usr/include/db4.8/:g" \
-		-e "s:^LIBDB=.*$:LIBDB=-ldb-4.8:g" \
-		-e "s:^PREFIX=.*$:PREFIX=${D}/usr:g" \
-		-e "s:^MANDIR=.*$:MANDIR=${D}/usr/share/man:g" \
-		Makefile.local || die
-	sed -i \
-		-e 's:^CAMLINCLUDE= -I lib -I bdb$:CAMLINCLUDE= -I lib -I bdb -I +cryptokit:g' \
-		-e 's:-Werror-implicit-function-declaration::g' \
-		Makefile bdb/Makefile || die
-	sed -i \
-		-e 's:/usr/sbin/sks:/usr/bin/sks:g' \
-		sks_build.sh || die
-
-	epatch "${FILESDIR}/${P}-eddsa.patch"
-	epatch "${FILESDIR}/${P}-disable-warn-error-a.patch"
-}
-
-src_compile() {
-	emake dep
-	# sks build fails with paralell build in module Bdb
-	emake -j1 all
-	if use optimize; then
-		emake all.bc
-	fi
-}
-
-src_test() {
-	./sks unit_test || die
-}
-
-src_install() {
-	if use optimize; then
-		emake install.bc
-		dosym /usr/bin/sks.bc usr/bin/sks
-		dosym /usr/bin/sks_add_mail.bc usr/bin/sks_add_mail
-	else
-		emake install
-	fi
-
-	dodoc README.md
-
-	newinitd "${FILESDIR}/sks-db.initd" sks-db
-	newinitd "${FILESDIR}/sks-recon.initd" sks-recon
-	newconfd "${FILESDIR}/sks.confd" sks
-	systemd_dounit "${FILESDIR}"/sks-db.service
-	systemd_dounit "${FILESDIR}"/sks-recon.service
-
-	dodir "/var/lib/sks/web.typical"
-	insinto /var/lib/sks
-	newins sampleConfig/DB_CONFIG DB_CONFIG.typical
-	newins sampleConfig/sksconf.typical sksconf.typical
-	insinto /var/lib/sks/web.typical
-	doins sampleWeb/HTML5/*
-
-	keepdir /var/lib/sks
-	readme.gentoo_create_doc
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-
-	if [[ -n ${REPLACING_VERSIONS} ]]; then
-		einfo "Note when upgrading from versions of SKS earlier than 1.1.4"
-		einfo "The default values for pagesize settings have changed. To continue"
-		einfo "using an existing DB without rebuilding, explicit settings have to be"
-		einfo "added to the sksconf file."
-		einfo "pagesize:       4"
-		einfo "ptree_pagesize: 1"
-	fi;
-}

diff --git a/net-misc/sks/sks-1.1.5-r2.ebuild b/net-misc/sks/sks-1.1.5-r2.ebuild
deleted file mode 100644
index 4aa095c..0000000
--- a/net-misc/sks/sks-1.1.5-r2.ebuild
+++ /dev/null
@@ -1,118 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=5
-
-inherit multilib user readme.gentoo systemd
-
-DESCRIPTION="An OpenPGP keyserver which is decentralized and provides highly reliable synchronization"
-HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"
-SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~x86"
-IUSE="optimize test"
-DOC_CONTENTS="To get sks running, first build the database,
-start the databse, import atleast one key, then
-run a cleandb. See the sks man page for more information
-Typical DB_CONFIG file and sksconf has been installed
-in /var/lib/sks and can be used as templates by renaming
-to remove the .typical extension. The DB_CONFIG file has
-to be in place before doing the database build, or the BDB
-environment has to be manually cleared from both KDB and PTree.
-The same applies if you are upgrading to this version with an existing KDB/Ptree,
-using another version of BDB than 4.8; you need to clear the environment
-using e.g. db4.6_recover -h . and db4.6_checkpoint -1h . in both KDB and PTree
-Additionally a sample web interface has been installed as
-web.typical in /var/lib/sks that can be used by renaming it to web
-Important: It is strongly recommended to set up SKS behind a
-reverse proxy. Instructions on properly configuring SKS can be
-found at https://bitbucket.org/skskeyserver/sks-keyserver/wiki/Peering"
-
-DEPEND="dev-lang/ocaml
-	dev-ml/cryptokit
-	sys-libs/db:4.8"
-RDEPEND="${DEPEND}"
-
-pkg_setup() {
-	ebegin "Creating named group and user"
-	enewgroup sks
-	enewuser sks -1 -1 /var/lib/sks sks
-}
-
-src_prepare() {
-	cp Makefile.local.unused Makefile.local || die
-	sed -i \
-		-e "s:^BDBLIB=.*$:BDBLIB=-L/usr/$(get_libdir):g" \
-		-e "s:^BDBINCLUDE=.*$:BDBINCLUDE=-I/usr/include/db4.8/:g" \
-		-e "s:^LIBDB=.*$:LIBDB=-ldb-4.8:g" \
-		-e "s:^PREFIX=.*$:PREFIX=${D}/usr:g" \
-		-e "s:^MANDIR=.*$:MANDIR=${D}/usr/share/man:g" \
-		Makefile.local || die
-	sed -i \
-		-e 's:^CAMLINCLUDE= -I lib -I bdb$:CAMLINCLUDE= -I lib -I bdb -I +cryptokit:g' \
-		-e 's:-Werror-implicit-function-declaration::g' \
-		Makefile bdb/Makefile || die
-	sed -i \
-		-e 's:/usr/sbin/sks:/usr/bin/sks:g' \
-		sks_build.sh || die
-
-	epatch "${FILESDIR}/${P}-eddsa.patch"
-	epatch "${FILESDIR}/${P}-disable-warn-error-a.patch"
-	epatch "${FILESDIR}/${P}-curve25519.patch"
-}
-
-src_compile() {
-	emake dep
-	# sks build fails with paralell build in module Bdb
-	emake -j1 all
-	if use optimize; then
-		emake all.bc
-	fi
-}
-
-src_test() {
-	./sks unit_test || die
-}
-
-src_install() {
-	if use optimize; then
-		emake install.bc
-		dosym /usr/bin/sks.bc usr/bin/sks
-		dosym /usr/bin/sks_add_mail.bc usr/bin/sks_add_mail
-	else
-		emake install
-	fi
-
-	dodoc README.md
-
-	newinitd "${FILESDIR}/sks-db.initd" sks-db
-	newinitd "${FILESDIR}/sks-recon.initd" sks-recon
-	newconfd "${FILESDIR}/sks.confd" sks
-	systemd_dounit "${FILESDIR}"/sks-db.service
-	systemd_dounit "${FILESDIR}"/sks-recon.service
-
-	dodir "/var/lib/sks/web.typical"
-	insinto /var/lib/sks
-	newins sampleConfig/DB_CONFIG DB_CONFIG.typical
-	newins sampleConfig/sksconf.typical sksconf.typical
-	insinto /var/lib/sks/web.typical
-	doins sampleWeb/HTML5/*
-
-	keepdir /var/lib/sks
-	readme.gentoo_create_doc
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-
-	if [[ -n ${REPLACING_VERSIONS} ]]; then
-		einfo "Note when upgrading from versions of SKS earlier than 1.1.4"
-		einfo "The default values for pagesize settings have changed. To continue"
-		einfo "using an existing DB without rebuilding, explicit settings have to be"
-		einfo "added to the sksconf file."
-		einfo "pagesize:       4"
-		einfo "ptree_pagesize: 1"
-	fi;
-}

[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

[Kristian Fiskerstrand]

commit:     089e817e7f81c614b7739dd8118e9babfbcdf3d5
Author:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
AuthorDate: Tue Feb 16 17:40:00 2016 +0000
Commit:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
CommitDate: Tue Feb 16 17:43:20 2016 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=089e817e

net-misc/sks: Fix ocaml4 dependency

Since ocaml 4 camlp4o is split in a separate package dev-ml/camlp4.
Bump minimum ocaml version to 4 that is now stable already and supported
upstream and add the missing dependency after the split

Bug: 568932

Package-Manager: portage-2.2.27

 net-misc/sks/sks-1.1.5-r3.ebuild | 119 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 119 insertions(+)

diff --git a/net-misc/sks/sks-1.1.5-r3.ebuild b/net-misc/sks/sks-1.1.5-r3.ebuild
new file mode 100644
index 0000000..d242e31
--- /dev/null
+++ b/net-misc/sks/sks-1.1.5-r3.ebuild
@@ -0,0 +1,119 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+inherit multilib user readme.gentoo systemd
+
+DESCRIPTION="An OpenPGP keyserver which is decentralized with highly reliable synchronization"
+HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"
+SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE="optimize test"
+DOC_CONTENTS="To get sks running, first build the database,
+start the databse, import atleast one key, then
+run a cleandb. See the sks man page for more information
+Typical DB_CONFIG file and sksconf has been installed
+in /var/lib/sks and can be used as templates by renaming
+to remove the .typical extension. The DB_CONFIG file has
+to be in place before doing the database build, or the BDB
+environment has to be manually cleared from both KDB and PTree.
+The same applies if you are upgrading to this version with an existing KDB/Ptree,
+using another version of BDB than 4.8; you need to clear the environment
+using e.g. db4.6_recover -h . and db4.6_checkpoint -1h . in both KDB and PTree
+Additionally a sample web interface has been installed as
+web.typical in /var/lib/sks that can be used by renaming it to web
+Important: It is strongly recommended to set up SKS behind a
+reverse proxy. Instructions on properly configuring SKS can be
+found at https://bitbucket.org/skskeyserver/sks-keyserver/wiki/Peering"
+
+DEPEND=">=dev-lang/ocaml-4.0
+	dev-ml/camlp4
+	dev-ml/cryptokit
+	sys-libs/db:4.8"
+RDEPEND="${DEPEND}"
+
+pkg_setup() {
+	ebegin "Creating named group and user"
+	enewgroup sks
+	enewuser sks -1 -1 /var/lib/sks sks
+}
+
+src_prepare() {
+	cp Makefile.local.unused Makefile.local || die
+	sed -i \
+		-e "s:^BDBLIB=.*$:BDBLIB=-L/usr/$(get_libdir):g" \
+		-e "s:^BDBINCLUDE=.*$:BDBINCLUDE=-I/usr/include/db4.8/:g" \
+		-e "s:^LIBDB=.*$:LIBDB=-ldb-4.8:g" \
+		-e "s:^PREFIX=.*$:PREFIX=${D}/usr:g" \
+		-e "s:^MANDIR=.*$:MANDIR=${D}/usr/share/man:g" \
+		Makefile.local || die
+	sed -i \
+		-e 's:^CAMLINCLUDE= -I lib -I bdb$:CAMLINCLUDE= -I lib -I bdb -I +cryptokit:g' \
+		-e 's:-Werror-implicit-function-declaration::g' \
+		Makefile bdb/Makefile || die
+	sed -i \
+		-e 's:/usr/sbin/sks:/usr/bin/sks:g' \
+		sks_build.sh || die
+
+	epatch "${FILESDIR}/${P}-eddsa.patch"
+	epatch "${FILESDIR}/${P}-disable-warn-error-a.patch"
+	epatch "${FILESDIR}/${P}-curve25519.patch"
+}
+
+src_compile() {
+	emake dep
+	# sks build fails with paralell build in module Bdb
+	emake -j1 all
+	if use optimize; then
+		emake all.bc
+	fi
+}
+
+src_test() {
+	./sks unit_test || die
+}
+
+src_install() {
+	if use optimize; then
+		emake install.bc
+		dosym /usr/bin/sks.bc usr/bin/sks
+		dosym /usr/bin/sks_add_mail.bc usr/bin/sks_add_mail
+	else
+		emake install
+	fi
+
+	dodoc README.md
+
+	newinitd "${FILESDIR}/sks-db.initd" sks-db
+	newinitd "${FILESDIR}/sks-recon.initd" sks-recon
+	newconfd "${FILESDIR}/sks.confd" sks
+	systemd_dounit "${FILESDIR}"/sks-db.service
+	systemd_dounit "${FILESDIR}"/sks-recon.service
+
+	dodir "/var/lib/sks/web.typical"
+	insinto /var/lib/sks
+	newins sampleConfig/DB_CONFIG DB_CONFIG.typical
+	newins sampleConfig/sksconf.typical sksconf.typical
+	insinto /var/lib/sks/web.typical
+	doins sampleWeb/HTML5/*
+
+	keepdir /var/lib/sks
+	readme.gentoo_create_doc
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+
+	if [[ -n ${REPLACING_VERSIONS} ]]; then
+		einfo "Note when upgrading from versions of SKS earlier than 1.1.4"
+		einfo "The default values for pagesize settings have changed. To continue"
+		einfo "using an existing DB without rebuilding, explicit settings have to be"
+		einfo "added to the sksconf file."
+		einfo "pagesize:       4"
+		einfo "ptree_pagesize: 1"
+	fi;
+}

[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

[Kristian Fiskerstrand]

commit:     780a3042c16cbf21580eaba81f9fbf567b41d80c
Author:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
AuthorDate: Tue Feb 16 17:41:39 2016 +0000
Commit:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
CommitDate: Tue Feb 16 17:43:30 2016 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=780a3042

net-misc/sks: Maintainer stabilization of amd64

Package-Manager: portage-2.2.27

 net-misc/sks/sks-1.1.5-r3.ebuild | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net-misc/sks/sks-1.1.5-r3.ebuild b/net-misc/sks/sks-1.1.5-r3.ebuild
index d242e31..f7a6c13 100644
--- a/net-misc/sks/sks-1.1.5-r3.ebuild
+++ b/net-misc/sks/sks-1.1.5-r3.ebuild
@@ -11,7 +11,7 @@ HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"
 SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"
 LICENSE="GPL-2"
 SLOT="0"
-KEYWORDS="~amd64 ~x86"
+KEYWORDS="amd64 ~x86"
 IUSE="optimize test"
 DOC_CONTENTS="To get sks running, first build the database,
 start the databse, import atleast one key, then

[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

[Kristian Fiskerstrand]

commit:     8a311ff7295d65c92ea69d21d33696c6e4c8dbb9
Author:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
AuthorDate: Sun Aug  7 14:47:31 2016 +0000
Commit:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
CommitDate: Sun Aug  7 14:55:12 2016 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=8a311ff7

net-misc/sks: Version bump to 1.1.6

Package-Manager: portage-2.3.0

 net-misc/sks/Manifest         |   1 +
 net-misc/sks/sks-1.1.6.ebuild | 115 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 116 insertions(+)

diff --git a/net-misc/sks/Manifest b/net-misc/sks/Manifest
index d751a70..7d543a7 100644
--- a/net-misc/sks/Manifest
+++ b/net-misc/sks/Manifest
@@ -1 +1,2 @@
 DIST sks-1.1.5.tgz 362941 SHA256 92a7f113f0ba7a28d51d7ced60a984d042d8524c651dc3fcafe9d11cc32981a0 SHA512 1fc1248281b4eb6bd0bafad7f3d1600ee86905614ee5c644d532059f972040c2673bee780a414e50e9287fc74fd140ac85db9629d502cff989981904acd3710c WHIRLPOOL 4281b40d72e7370b7c848d683beff2f4bd705a06139a25b27efe5be8a521df9fb870bdeeea97ac3617d542b64fd9c539f90d8f695cea1fec2bdcf267a2d3dc1f
+DIST sks-1.1.6.tgz 359499 SHA256 22312dbec6dfd372932075b0b0b1d04f772059a9520faa4937feafc737d5a632 SHA512 f7c54194274834840b9701bf827b81add0f807dd4c6019968a6b0c755c9117519433ebb1161da38d23c465b163dd31a766700023afa13174e4dc82542fa98099 WHIRLPOOL 85714515275c21821ff3bc429d00546f1f3b1cf6b8193edd1b26295ec07861ed1ed8b123deb811b6b915d761e977662398e7509581d8fe0e32d47ea6dd09388a

diff --git a/net-misc/sks/sks-1.1.6.ebuild b/net-misc/sks/sks-1.1.6.ebuild
new file mode 100644
index 0000000..80ee291
--- /dev/null
+++ b/net-misc/sks/sks-1.1.6.ebuild
@@ -0,0 +1,115 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+inherit multilib user readme.gentoo systemd
+
+DESCRIPTION="An OpenPGP keyserver which is decentralized with highly reliable synchronization"
+HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"
+SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE="optimize test"
+DOC_CONTENTS="To get sks running, first build the database,
+start the databse, import atleast one key, then
+run a cleandb. See the sks man page for more information
+Typical DB_CONFIG file and sksconf has been installed
+in /var/lib/sks and can be used as templates by renaming
+to remove the .typical extension. The DB_CONFIG file has
+to be in place before doing the database build, or the BDB
+environment has to be manually cleared from both KDB and PTree.
+The same applies if you are upgrading to this version with an existing KDB/Ptree,
+using another version of BDB than 4.8; you need to clear the environment
+using e.g. db4.6_recover -h . and db4.6_checkpoint -1h . in both KDB and PTree
+Additionally a sample web interface has been installed as
+web.typical in /var/lib/sks that can be used by renaming it to web
+Important: It is strongly recommended to set up SKS behind a
+reverse proxy. Instructions on properly configuring SKS can be
+found at https://bitbucket.org/skskeyserver/sks-keyserver/wiki/Peering"
+
+DEPEND=">=dev-lang/ocaml-4.0
+	dev-ml/camlp4
+	dev-ml/cryptokit
+	sys-libs/db:4.8"
+RDEPEND="${DEPEND}"
+
+pkg_setup() {
+	ebegin "Creating named group and user"
+	enewgroup sks
+	enewuser sks -1 -1 /var/lib/sks sks
+}
+
+src_prepare() {
+	cp Makefile.local.unused Makefile.local || die
+	sed -i \
+		-e "s:^BDBLIB=.*$:BDBLIB=-L/usr/$(get_libdir):g" \
+		-e "s:^BDBINCLUDE=.*$:BDBINCLUDE=-I/usr/include/db4.8/:g" \
+		-e "s:^LIBDB=.*$:LIBDB=-ldb-4.8:g" \
+		-e "s:^PREFIX=.*$:PREFIX=${D}/usr:g" \
+		-e "s:^MANDIR=.*$:MANDIR=${D}/usr/share/man:g" \
+		Makefile.local || die
+	sed -i \
+		-e 's:^CAMLINCLUDE= -I lib -I bdb$:CAMLINCLUDE= -I lib -I bdb -I +cryptokit:g' \
+		-e 's:-Werror-implicit-function-declaration::g' \
+		Makefile bdb/Makefile || die
+	sed -i \
+		-e 's:/usr/sbin/sks:/usr/bin/sks:g' \
+		sks_build.sh || die
+}
+
+src_compile() {
+	emake dep
+	# sks build fails with paralell build in module Bdb
+	emake -j1 all
+	if use optimize; then
+		emake all.bc
+	fi
+}
+
+src_test() {
+	./sks unit_test || die
+}
+
+src_install() {
+	if use optimize; then
+		emake install.bc
+		dosym /usr/bin/sks.bc usr/bin/sks
+		dosym /usr/bin/sks_add_mail.bc usr/bin/sks_add_mail
+	else
+		emake install
+	fi
+
+	dodoc README.md
+
+	newinitd "${FILESDIR}/sks-db.initd" sks-db
+	newinitd "${FILESDIR}/sks-recon.initd" sks-recon
+	newconfd "${FILESDIR}/sks.confd" sks
+	systemd_dounit "${FILESDIR}"/sks-db.service
+	systemd_dounit "${FILESDIR}"/sks-recon.service
+
+	dodir "/var/lib/sks/web.typical"
+	insinto /var/lib/sks
+	newins sampleConfig/DB_CONFIG DB_CONFIG.typical
+	newins sampleConfig/sksconf.typical sksconf.typical
+	insinto /var/lib/sks/web.typical
+	doins sampleWeb/HTML5/*
+
+	keepdir /var/lib/sks
+	readme.gentoo_create_doc
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+
+	if [[ -n ${REPLACING_VERSIONS} ]]; then
+		einfo "Note when upgrading from versions of SKS earlier than 1.1.4"
+		einfo "The default values for pagesize settings have changed. To continue"
+		einfo "using an existing DB without rebuilding, explicit settings have to be"
+		einfo "added to the sksconf file."
+		einfo "pagesize:       4"
+		einfo "ptree_pagesize: 1"
+	fi;
+}

[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

[Patrice Clement]

commit:     d07a002161d338b2d6332e65d566f1a251e04781
Author:     Pavel Kulyov <kulyov.pavel <AT> gmail <DOT> com>
AuthorDate: Mon Sep 12 00:26:48 2016 +0000
Commit:     Patrice Clement <monsieurp <AT> gentoo <DOT> org>
CommitDate: Mon Sep 12 06:04:06 2016 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d07a0021

net-misc/sks: fix typo 'databse'->'database'.

Closes: https://github.com/gentoo/gentoo/pull/2308

Signed-off-by: Patrice Clement <monsieurp <AT> gentoo.org>

 net-misc/sks/sks-1.1.5-r3.ebuild | 2 +-
 net-misc/sks/sks-1.1.6.ebuild    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/net-misc/sks/sks-1.1.5-r3.ebuild b/net-misc/sks/sks-1.1.5-r3.ebuild
index f7a6c13..edf20b6 100644
--- a/net-misc/sks/sks-1.1.5-r3.ebuild
+++ b/net-misc/sks/sks-1.1.5-r3.ebuild
@@ -14,7 +14,7 @@ SLOT="0"
 KEYWORDS="amd64 ~x86"
 IUSE="optimize test"
 DOC_CONTENTS="To get sks running, first build the database,
-start the databse, import atleast one key, then
+start the database, import atleast one key, then
 run a cleandb. See the sks man page for more information
 Typical DB_CONFIG file and sksconf has been installed
 in /var/lib/sks and can be used as templates by renaming

diff --git a/net-misc/sks/sks-1.1.6.ebuild b/net-misc/sks/sks-1.1.6.ebuild
index 80ee291..8a22c82 100644
--- a/net-misc/sks/sks-1.1.6.ebuild
+++ b/net-misc/sks/sks-1.1.6.ebuild
@@ -14,7 +14,7 @@ SLOT="0"
 KEYWORDS="~amd64 ~x86"
 IUSE="optimize test"
 DOC_CONTENTS="To get sks running, first build the database,
-start the databse, import atleast one key, then
+start the database, import atleast one key, then
 run a cleandb. See the sks man page for more information
 Typical DB_CONFIG file and sksconf has been installed
 in /var/lib/sks and can be used as templates by renaming

[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

[Kristian Fiskerstrand]

commit:     686b5785f4bec4b12b970848fb10e1b58533e11a
Author:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
AuthorDate: Wed Jun 28 07:35:19 2017 +0000
Commit:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
CommitDate: Wed Jun 28 07:38:41 2017 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=686b5785

net-misc/sks-1.1.6-r1: Stable for amd64

Maintainer self-stabilization

Package-Manager: Portage-2.3.6, Repoman-2.3.1

 net-misc/sks/sks-1.1.6-r1.ebuild | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net-misc/sks/sks-1.1.6-r1.ebuild b/net-misc/sks/sks-1.1.6-r1.ebuild
index 1368af1fdc2..8246327c4b0 100644
--- a/net-misc/sks/sks-1.1.6-r1.ebuild
+++ b/net-misc/sks/sks-1.1.6-r1.ebuild
@@ -10,7 +10,7 @@ HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"
 SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"
 LICENSE="GPL-2"
 SLOT="0"
-KEYWORDS="~amd64 ~x86"
+KEYWORDS="amd64 ~x86"
 IUSE="optimize test"
 DOC_CONTENTS="To get sks running, first build the database,
 start the database, import atleast one key, then

[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

[Kristian Fiskerstrand]

commit:     e0492c0e22b54bd83435627201953925f1669fb9
Author:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
AuthorDate: Sat Jul  8 15:48:20 2017 +0000
Commit:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
CommitDate: Sat Jul  8 15:48:44 2017 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e0492c0e

net-misc/sks: Cleanup old

Package-Manager: Portage-2.3.6, Repoman-2.3.1

 net-misc/sks/sks-1.1.6-r1.ebuild | 117 ---------------------------------------
 1 file changed, 117 deletions(-)

diff --git a/net-misc/sks/sks-1.1.6-r1.ebuild b/net-misc/sks/sks-1.1.6-r1.ebuild
deleted file mode 100644
index 8246327c4b0..00000000000
--- a/net-misc/sks/sks-1.1.6-r1.ebuild
+++ /dev/null
@@ -1,117 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-inherit multilib user readme.gentoo-r1 systemd
-
-DESCRIPTION="An OpenPGP keyserver which is decentralized with highly reliable synchronization"
-HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"
-SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ~x86"
-IUSE="optimize test"
-DOC_CONTENTS="To get sks running, first build the database,
-start the database, import atleast one key, then
-run a cleandb. See the sks man page for more information
-Typical DB_CONFIG file and sksconf has been installed
-in /var/lib/sks and can be used as templates by renaming
-to remove the .typical extension. The DB_CONFIG file has
-to be in place before doing the database build, or the BDB
-environment has to be manually cleared from both KDB and PTree.
-The same applies if you are upgrading to this version with an existing KDB/Ptree,
-using another version of BDB than 4.8; you need to clear the environment
-using e.g. db4.6_recover -h . and db4.6_checkpoint -1h . in both KDB and PTree
-Additionally a sample web interface has been installed as
-web.typical in /var/lib/sks that can be used by renaming it to web
-Important: It is strongly recommended to set up SKS behind a
-reverse proxy. Instructions on properly configuring SKS can be
-found at https://bitbucket.org/skskeyserver/sks-keyserver/wiki/Peering"
-
-DEPEND=">=dev-lang/ocaml-4.0
-	dev-ml/findlib
-	dev-ml/camlp4
-	dev-ml/cryptokit:0/1.10
-	sys-libs/db:5.3"
-RDEPEND="${DEPEND}"
-
-pkg_setup() {
-	ebegin "Creating named group and user"
-	enewgroup sks
-	enewuser sks -1 -1 /var/lib/sks sks
-}
-
-src_prepare() {
-	eapply "${FILESDIR}/${P}-unbundle-cryptokit.patch"
-	cp Makefile.local.unused Makefile.local || die
-	sed -i \
-		-e "s:^BDBLIB=.*$:BDBLIB=-L/usr/$(get_libdir):g" \
-		-e "s:^BDBINCLUDE=.*$:BDBINCLUDE=-I/usr/include/db5.3/:g" \
-		-e "s:^LIBDB=.*$:LIBDB=-ldb-5.3:g" \
-		-e "s:^PREFIX=.*$:PREFIX=${D}/usr:g" \
-		-e "s:^MANDIR=.*$:MANDIR=${D}/usr/share/man:g" \
-		Makefile.local || die
-	sed -i \
-		-e 's:^CAMLINCLUDE= -I lib -I bdb$:CAMLINCLUDE= -I lib -I bdb -I +cryptokit:g' \
-		-e 's:-Werror-implicit-function-declaration::g' \
-		Makefile bdb/Makefile || die
-	sed -i \
-		-e 's:/usr/sbin/sks:/usr/bin/sks:g' \
-		sks_build.sh || die
-	eapply_user
-}
-
-src_compile() {
-	emake dep
-	# sks build fails with paralell build in module Bdb
-	emake -j1 all
-	if use optimize; then
-		emake all.bc
-	fi
-}
-
-src_test() {
-	./sks unit_test || die
-}
-
-src_install() {
-	if use optimize; then
-		emake install.bc
-		dosym /usr/bin/sks.bc usr/bin/sks
-		dosym /usr/bin/sks_add_mail.bc usr/bin/sks_add_mail
-	else
-		emake install
-	fi
-
-	dodoc README.md
-
-	newinitd "${FILESDIR}/sks-db.initd" sks-db
-	newinitd "${FILESDIR}/sks-recon.initd" sks-recon
-	newconfd "${FILESDIR}/sks.confd" sks
-	systemd_dounit "${FILESDIR}"/sks-db.service
-	systemd_dounit "${FILESDIR}"/sks-recon.service
-
-	dodir "/var/lib/sks/web.typical"
-	insinto /var/lib/sks
-	newins sampleConfig/DB_CONFIG DB_CONFIG.typical
-	newins sampleConfig/sksconf.typical sksconf.typical
-	insinto /var/lib/sks/web.typical
-	doins sampleWeb/HTML5/*
-
-	keepdir /var/lib/sks
-	readme.gentoo_create_doc
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-
-	if [[ -n ${REPLACING_VERSIONS} ]]; then
-		einfo "Note when upgrading from versions of SKS earlier than 1.1.4"
-		einfo "The default values for pagesize settings have changed. To continue"
-		einfo "using an existing DB without rebuilding, explicit settings have to be"
-		einfo "added to the sksconf file."
-		einfo "pagesize:       4"
-		einfo "ptree_pagesize: 1"
-	fi;
-}

[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

[Kristian Fiskerstrand]

commit:     59d13589498eab0111ea397d3d09b3e1f3410cb5
Author:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
AuthorDate: Sat Jul  8 15:47:46 2017 +0000
Commit:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
CommitDate: Sat Jul  8 15:48:42 2017 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=59d13589

net-misc/sks: Add slot operator on ocaml

Since resulting binary is static linked with ocaml we need a subslot dep in order to ensure rebuild to pick up security upgrades etc

straight to stable bump

Package-Manager: Portage-2.3.6, Repoman-2.3.1
RepoMan-Options: --force

 net-misc/sks/sks-1.1.6-r2.ebuild | 117 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 117 insertions(+)

diff --git a/net-misc/sks/sks-1.1.6-r2.ebuild b/net-misc/sks/sks-1.1.6-r2.ebuild
new file mode 100644
index 00000000000..b51abaff413
--- /dev/null
+++ b/net-misc/sks/sks-1.1.6-r2.ebuild
@@ -0,0 +1,117 @@
+# Copyright 1999-2017 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=6
+
+inherit multilib user readme.gentoo-r1 systemd
+
+DESCRIPTION="An OpenPGP keyserver which is decentralized with highly reliable synchronization"
+HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"
+SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="amd64 ~x86"
+IUSE="optimize test"
+DOC_CONTENTS="To get sks running, first build the database,
+start the database, import atleast one key, then
+run a cleandb. See the sks man page for more information
+Typical DB_CONFIG file and sksconf has been installed
+in /var/lib/sks and can be used as templates by renaming
+to remove the .typical extension. The DB_CONFIG file has
+to be in place before doing the database build, or the BDB
+environment has to be manually cleared from both KDB and PTree.
+The same applies if you are upgrading to this version with an existing KDB/Ptree,
+using another version of BDB than 4.8; you need to clear the environment
+using e.g. db4.6_recover -h . and db4.6_checkpoint -1h . in both KDB and PTree
+Additionally a sample web interface has been installed as
+web.typical in /var/lib/sks that can be used by renaming it to web
+Important: It is strongly recommended to set up SKS behind a
+reverse proxy. Instructions on properly configuring SKS can be
+found at https://bitbucket.org/skskeyserver/sks-keyserver/wiki/Peering"
+
+DEPEND=">=dev-lang/ocaml-4.0:=
+	dev-ml/findlib
+	dev-ml/camlp4
+	dev-ml/cryptokit:0/1.10
+	sys-libs/db:5.3"
+RDEPEND="${DEPEND}"
+
+pkg_setup() {
+	ebegin "Creating named group and user"
+	enewgroup sks
+	enewuser sks -1 -1 /var/lib/sks sks
+}
+
+src_prepare() {
+	eapply "${FILESDIR}/${P}-unbundle-cryptokit.patch"
+	cp Makefile.local.unused Makefile.local || die
+	sed -i \
+		-e "s:^BDBLIB=.*$:BDBLIB=-L/usr/$(get_libdir):g" \
+		-e "s:^BDBINCLUDE=.*$:BDBINCLUDE=-I/usr/include/db5.3/:g" \
+		-e "s:^LIBDB=.*$:LIBDB=-ldb-5.3:g" \
+		-e "s:^PREFIX=.*$:PREFIX=${D}/usr:g" \
+		-e "s:^MANDIR=.*$:MANDIR=${D}/usr/share/man:g" \
+		Makefile.local || die
+	sed -i \
+		-e 's:^CAMLINCLUDE= -I lib -I bdb$:CAMLINCLUDE= -I lib -I bdb -I +cryptokit:g' \
+		-e 's:-Werror-implicit-function-declaration::g' \
+		Makefile bdb/Makefile || die
+	sed -i \
+		-e 's:/usr/sbin/sks:/usr/bin/sks:g' \
+		sks_build.sh || die
+	eapply_user
+}
+
+src_compile() {
+	emake dep
+	# sks build fails with paralell build in module Bdb
+	emake -j1 all
+	if use optimize; then
+		emake all.bc
+	fi
+}
+
+src_test() {
+	./sks unit_test || die
+}
+
+src_install() {
+	if use optimize; then
+		emake install.bc
+		dosym /usr/bin/sks.bc usr/bin/sks
+		dosym /usr/bin/sks_add_mail.bc usr/bin/sks_add_mail
+	else
+		emake install
+	fi
+
+	dodoc README.md
+
+	newinitd "${FILESDIR}/sks-db.initd" sks-db
+	newinitd "${FILESDIR}/sks-recon.initd" sks-recon
+	newconfd "${FILESDIR}/sks.confd" sks
+	systemd_dounit "${FILESDIR}"/sks-db.service
+	systemd_dounit "${FILESDIR}"/sks-recon.service
+
+	dodir "/var/lib/sks/web.typical"
+	insinto /var/lib/sks
+	newins sampleConfig/DB_CONFIG DB_CONFIG.typical
+	newins sampleConfig/sksconf.typical sksconf.typical
+	insinto /var/lib/sks/web.typical
+	doins sampleWeb/HTML5/*
+
+	keepdir /var/lib/sks
+	readme.gentoo_create_doc
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+
+	if [[ -n ${REPLACING_VERSIONS} ]]; then
+		einfo "Note when upgrading from versions of SKS earlier than 1.1.4"
+		einfo "The default values for pagesize settings have changed. To continue"
+		einfo "using an existing DB without rebuilding, explicit settings have to be"
+		einfo "added to the sksconf file."
+		einfo "pagesize:       4"
+		einfo "ptree_pagesize: 1"
+	fi;
+}

[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

[Kristian Fiskerstrand]

commit:     7283708cf895d803905983c174c58336bbc14b01
Author:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
AuthorDate: Sun Jul  9 15:59:29 2017 +0000
Commit:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
CommitDate: Sun Jul  9 15:59:58 2017 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=7283708c

net-misc/sks: Clean up makefile string replacement

Since upstreamed cryptokit unbundle and ocamlfind usage, clean up sed

Package-Manager: Portage-2.3.6, Repoman-2.3.1

 net-misc/sks/{sks-1.1.6-r3.ebuild => sks-1.1.6-r4.ebuild} | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/net-misc/sks/sks-1.1.6-r3.ebuild b/net-misc/sks/sks-1.1.6-r4.ebuild
similarity index 95%
rename from net-misc/sks/sks-1.1.6-r3.ebuild
rename to net-misc/sks/sks-1.1.6-r4.ebuild
index a830d01e828..d08143afcd7 100644
--- a/net-misc/sks/sks-1.1.6-r3.ebuild
+++ b/net-misc/sks/sks-1.1.6-r4.ebuild
@@ -54,10 +54,6 @@ src_prepare() {
 		-e "s:^MANDIR=.*$:MANDIR=${D}/usr/share/man:g" \
 		Makefile.local || die
 	sed -i \
-		-e 's:^CAMLINCLUDE= -I lib -I bdb$:CAMLINCLUDE= -I lib -I bdb -I +cryptokit:g' \
-		-e 's:-Werror-implicit-function-declaration::g' \
-		Makefile bdb/Makefile || die
-	sed -i \
 		-e 's:/usr/sbin/sks:/usr/bin/sks:g' \
 		sks_build.sh || die
 	eapply_user

[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

[Kristian Fiskerstrand]

commit:     da2d49c8b27716cb384dbd2b941acb6cd794384f
Author:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
AuthorDate: Sun Jul  9 19:21:06 2017 +0000
Commit:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
CommitDate: Sun Jul  9 19:21:38 2017 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=da2d49c8

net-misc/sks: add dosym for sks_build.sh

Package-Manager: Portage-2.3.6, Repoman-2.3.1

 net-misc/sks/sks-1.1.6-r5.ebuild | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net-misc/sks/sks-1.1.6-r5.ebuild b/net-misc/sks/sks-1.1.6-r5.ebuild
index 3ca116dbae9..ceda8844da9 100644
--- a/net-misc/sks/sks-1.1.6-r5.ebuild
+++ b/net-misc/sks/sks-1.1.6-r5.ebuild
@@ -60,6 +60,7 @@ src_prepare() {
 	sed -i \
 		-e 's:/usr/sbin/sks:/usr/bin/sks:g' \
 		sks_build.sh || die
+	dosym /usr/bin/sks_build.sh /usr/bin/sks_build.bc.sh
 	eapply_user
 }
 

[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

[Kristian Fiskerstrand]

commit:     0eeb47d2c5a86e1cc1ff584f6582b532dceef408
Author:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
AuthorDate: Sun Jul  9 19:55:00 2017 +0000
Commit:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
CommitDate: Sun Jul  9 19:55:34 2017 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=0eeb47d2

net-misc/sks: remove redundant empty line

Package-Manager: Portage-2.3.6, Repoman-2.3.1

 net-misc/sks/sks-1.1.6-r5.ebuild | 1 -
 1 file changed, 1 deletion(-)

diff --git a/net-misc/sks/sks-1.1.6-r5.ebuild b/net-misc/sks/sks-1.1.6-r5.ebuild
index ceda8844da9..8b50b33a7cf 100644
--- a/net-misc/sks/sks-1.1.6-r5.ebuild
+++ b/net-misc/sks/sks-1.1.6-r5.ebuild
@@ -48,7 +48,6 @@ src_prepare() {
 			"${FILESDIR}/${P}-use-ocamlfind2.patch" \
 			"${FILESDIR}/${P}-use-ocamlfind3.patch"
 
-
 	cp Makefile.local.unused Makefile.local || die
 	sed -i \
 		-e "s:^BDBLIB=.*$:BDBLIB=-L/usr/$(get_libdir):g" \

[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

[Sam James]

commit:     2a2b43460a172a3e31d3fc3a295501ec93aa23a5
Author:     Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Thu Oct  8 22:41:30 2020 +0000
Commit:     Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Thu Oct  8 22:41:30 2020 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=2a2b4346

net-misc/sks: cleanup old

Package-Manager: Portage-3.0.4, Repoman-3.0.1
Signed-off-by: Sam James <sam <AT> gentoo.org>

 net-misc/sks/sks-1.1.6-r4.ebuild | 115 -------------------------------------
 net-misc/sks/sks-1.1.6-r5.ebuild | 119 ---------------------------------------
 2 files changed, 234 deletions(-)

diff --git a/net-misc/sks/sks-1.1.6-r4.ebuild b/net-misc/sks/sks-1.1.6-r4.ebuild
deleted file mode 100644
index 89cc2ec999a..00000000000
--- a/net-misc/sks/sks-1.1.6-r4.ebuild
+++ /dev/null
@@ -1,115 +0,0 @@
-# Copyright 1999-2019 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-inherit multilib user readme.gentoo-r1 systemd
-
-DESCRIPTION="An OpenPGP keyserver which is decentralized with highly reliable synchronization"
-HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"
-SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~x86"
-IUSE="optimize test"
-RESTRICT="!test? ( test )"
-DOC_CONTENTS="To get sks running, first build the database,
-start the database, import atleast one key, then
-run a cleandb. See the sks man page for more information
-Typical DB_CONFIG file and sksconf has been installed
-in /var/lib/sks and can be used as templates by renaming
-to remove the .typical extension. The DB_CONFIG file has
-to be in place before doing the database build, or the BDB
-environment has to be manually cleared from both KDB and PTree.
-The same applies if you are upgrading to this version with an existing KDB/Ptree,
-using another version of BDB than 4.8; you need to clear the environment
-using e.g. db4.6_recover -h . and db4.6_checkpoint -1h . in both KDB and PTree
-Additionally a sample web interface has been installed as
-web.typical in /var/lib/sks that can be used by renaming it to web
-Important: It is strongly recommended to set up SKS behind a
-reverse proxy. Instructions on properly configuring SKS can be
-found at https://bitbucket.org/skskeyserver/sks-keyserver/wiki/Peering"
-
-RDEPEND=">=dev-lang/ocaml-4.0:=
-	dev-ml/camlp4:=
-	dev-ml/cryptokit:=
-	sys-libs/db:5.3"
-DEPEND="${RDEPEND}
-	dev-ml/findlib"
-
-pkg_setup() {
-	ebegin "Creating named group and user"
-	enewgroup sks
-	enewuser sks -1 -1 /var/lib/sks sks
-}
-
-src_prepare() {
-	eapply "${FILESDIR}/${P}-unbundle-cryptokit.patch" \
-		   "${FILESDIR}/${P}-use-ocamlfind.patch"
-	cp Makefile.local.unused Makefile.local || die
-	sed -i \
-		-e "s:^BDBLIB=.*$:BDBLIB=-L/usr/$(get_libdir):g" \
-		-e "s:^BDBINCLUDE=.*$:BDBINCLUDE=-I/usr/include/db5.3/:g" \
-		-e "s:^LIBDB=.*$:LIBDB=-ldb-5.3:g" \
-		-e "s:^PREFIX=.*$:PREFIX=${D}/usr:g" \
-		-e "s:^MANDIR=.*$:MANDIR=${D}/usr/share/man:g" \
-		Makefile.local || die
-	sed -i \
-		-e 's:/usr/sbin/sks:/usr/bin/sks:g' \
-		sks_build.sh || die
-	eapply_user
-}
-
-src_compile() {
-	emake dep
-	# sks build fails with paralell build in module Bdb
-	emake -j1 all
-	if use optimize; then
-		emake all.bc
-	fi
-}
-
-src_test() {
-	./sks unit_test || die
-}
-
-src_install() {
-	if use optimize; then
-		emake install.bc
-		dosym /usr/bin/sks.bc usr/bin/sks
-		dosym /usr/bin/sks_add_mail.bc usr/bin/sks_add_mail
-	else
-		emake install
-	fi
-
-	dodoc README.md
-
-	newinitd "${FILESDIR}/sks-db.initd" sks-db
-	newinitd "${FILESDIR}/sks-recon.initd" sks-recon
-	newconfd "${FILESDIR}/sks.confd" sks
-	systemd_dounit "${FILESDIR}"/sks-db.service
-	systemd_dounit "${FILESDIR}"/sks-recon.service
-
-	dodir "/var/lib/sks/web.typical"
-	insinto /var/lib/sks
-	newins sampleConfig/DB_CONFIG DB_CONFIG.typical
-	newins sampleConfig/sksconf.typical sksconf.typical
-	insinto /var/lib/sks/web.typical
-	doins sampleWeb/HTML5/*
-
-	keepdir /var/lib/sks
-	readme.gentoo_create_doc
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-
-	if [[ -n ${REPLACING_VERSIONS} ]]; then
-		einfo "Note when upgrading from versions of SKS earlier than 1.1.4"
-		einfo "The default values for pagesize settings have changed. To continue"
-		einfo "using an existing DB without rebuilding, explicit settings have to be"
-		einfo "added to the sksconf file."
-		einfo "pagesize:       4"
-		einfo "ptree_pagesize: 1"
-	fi;
-}

diff --git a/net-misc/sks/sks-1.1.6-r5.ebuild b/net-misc/sks/sks-1.1.6-r5.ebuild
deleted file mode 100644
index f47c3888abe..00000000000
--- a/net-misc/sks/sks-1.1.6-r5.ebuild
+++ /dev/null
@@ -1,119 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-inherit multilib user readme.gentoo-r1 systemd
-
-DESCRIPTION="An OpenPGP keyserver which is decentralized with highly reliable synchronization"
-HOMEPAGE="https://github.com/SKS-Keyserver/sks-keyserver"
-SRC_URI="https://github.com/SKS-Keyserver/sks-keyserver/releases/download/${PV}/${P}.tgz"
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~x86"
-IUSE="optimize test"
-RESTRICT="!test? ( test )"
-DOC_CONTENTS="To get sks running, first build the database,
-start the database, import atleast one key, then
-run a cleandb. See the sks man page for more information
-Typical DB_CONFIG file and sksconf has been installed
-in /var/lib/sks and can be used as templates by renaming
-to remove the .typical extension. The DB_CONFIG file has
-to be in place before doing the database build, or the BDB
-environment has to be manually cleared from both KDB and PTree.
-The same applies if you are upgrading to this version with an existing KDB/Ptree,
-using another version of BDB than 4.8; you need to clear the environment
-using e.g. db4.6_recover -h . and db4.6_checkpoint -1h . in both KDB and PTree
-Additionally a sample web interface has been installed as
-web.typical in /var/lib/sks that can be used by renaming it to web
-Important: It is strongly recommended to set up SKS behind a
-reverse proxy. Instructions on properly configuring SKS can be
-found at https://bitbucket.org/skskeyserver/sks-keyserver/wiki/Peering"
-
-RDEPEND=">=dev-lang/ocaml-4.0:=
-	dev-ml/camlp4:=
-	dev-ml/cryptokit:=
-	sys-libs/db:5.3"
-DEPEND="${RDEPEND}
-	dev-ml/findlib"
-
-pkg_setup() {
-	ebegin "Creating named group and user"
-	enewgroup sks
-	enewuser sks -1 -1 /var/lib/sks sks
-}
-
-src_prepare() {
-	eapply "${FILESDIR}/${P}-unbundle-cryptokit.patch" \
-			"${FILESDIR}/${P}-use-ocamlfind.patch" \
-			"${FILESDIR}/${P}-use-ocamlfind2.patch" \
-			"${FILESDIR}/${P}-use-ocamlfind3.patch"
-
-	cp Makefile.local.unused Makefile.local || die
-	sed -i \
-		-e "s:^BDBLIB=.*$:BDBLIB=-L/usr/$(get_libdir):g" \
-		-e "s:^BDBINCLUDE=.*$:BDBINCLUDE=-I/usr/include/db5.3/:g" \
-		-e "s:^LIBDB=.*$:LIBDB=-ldb-5.3:g" \
-		-e "s:^PREFIX=.*$:PREFIX=${D}/usr:g" \
-		-e "s:^MANDIR=.*$:MANDIR=${D}/usr/share/man:g" \
-		Makefile.local || die
-	sed -i \
-		-e 's:/usr/sbin/sks:/usr/bin/sks:g' \
-		sks_build.sh || die
-	dosym /usr/bin/sks_build.sh /usr/bin/sks_build.bc.sh
-	eapply_user
-}
-
-src_compile() {
-	emake dep
-	# sks build fails with paralell build in module Bdb
-	emake -j1 all
-	if use optimize; then
-		emake all.bc
-	fi
-}
-
-src_test() {
-	./sks unit_test || die
-}
-
-src_install() {
-	if use optimize; then
-		emake install.bc
-		dosym /usr/bin/sks.bc usr/bin/sks
-		dosym /usr/bin/sks_add_mail.bc usr/bin/sks_add_mail
-	else
-		emake install
-	fi
-
-	dodoc README.md
-
-	newinitd "${FILESDIR}/sks-db.initd" sks-db
-	newinitd "${FILESDIR}/sks-recon.initd" sks-recon
-	newconfd "${FILESDIR}/sks.confd" sks
-	systemd_dounit "${FILESDIR}"/sks-db.service
-	systemd_dounit "${FILESDIR}"/sks-recon.service
-
-	dodir "/var/lib/sks/web.typical"
-	insinto /var/lib/sks
-	newins sampleConfig/DB_CONFIG DB_CONFIG.typical
-	newins sampleConfig/sksconf.typical sksconf.typical
-	insinto /var/lib/sks/web.typical
-	doins sampleWeb/HTML5/*
-
-	keepdir /var/lib/sks
-	readme.gentoo_create_doc
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-
-	if [[ -n ${REPLACING_VERSIONS} ]]; then
-		einfo "Note when upgrading from versions of SKS earlier than 1.1.4"
-		einfo "The default values for pagesize settings have changed. To continue"
-		einfo "using an existing DB without rebuilding, explicit settings have to be"
-		einfo "added to the sksconf file."
-		einfo "pagesize:       4"
-		einfo "ptree_pagesize: 1"
-	fi;
-}

[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

[Sam James]

commit:     db940ac2bdac8ebb3e39378cbbb8186adaedab00
Author:     Azamat H. Hackimov <azamat.hackimov <AT> gmail <DOT> com>
AuthorDate: Mon Aug 24 10:07:30 2020 +0000
Commit:     Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Thu Oct  8 22:40:27 2020 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=db940ac2

net-misc/sks: update HOMEPAGE and SRC_URI

Update HOMEPAGE and SRC_URI to Github URL
Closes: https://bugs.gentoo.org/738804
Package-Manager: Portage-2.3.103, Repoman-2.3.23
Signed-off-by: Azamat H. Hackimov <azamat.hackimov <AT> gmail.com>
Closes: https://github.com/gentoo/gentoo/pull/17250
Signed-off-by: Sam James <sam <AT> gentoo.org>

 net-misc/sks/metadata.xml        | 2 +-
 net-misc/sks/sks-1.1.6-r5.ebuild | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/net-misc/sks/metadata.xml b/net-misc/sks/metadata.xml
index 7bc958a5ed9..5b240d62d85 100644
--- a/net-misc/sks/metadata.xml
+++ b/net-misc/sks/metadata.xml
@@ -6,6 +6,6 @@
 		<flag name="optimize">Enables bytecode optimization</flag>
 	</use>
 	<upstream>
-		<remote-id type="bitbucket">skskeyserver/sks-keyserver</remote-id>
+		<remote-id type="github">SKS-Keyserver/sks-keyserver</remote-id>
 	</upstream>
 </pkgmetadata>

diff --git a/net-misc/sks/sks-1.1.6-r5.ebuild b/net-misc/sks/sks-1.1.6-r5.ebuild
index 6555ea2c8bf..f47c3888abe 100644
--- a/net-misc/sks/sks-1.1.6-r5.ebuild
+++ b/net-misc/sks/sks-1.1.6-r5.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2019 Gentoo Authors
+# Copyright 1999-2020 Gentoo Authors
 # Distributed under the terms of the GNU General Public License v2
 
 EAPI=6
@@ -6,8 +6,8 @@ EAPI=6
 inherit multilib user readme.gentoo-r1 systemd
 
 DESCRIPTION="An OpenPGP keyserver which is decentralized with highly reliable synchronization"
-HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"
-SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"
+HOMEPAGE="https://github.com/SKS-Keyserver/sks-keyserver"
+SRC_URI="https://github.com/SKS-Keyserver/sks-keyserver/releases/download/${PV}/${P}.tgz"
 LICENSE="GPL-2"
 SLOT="0"
 KEYWORDS="~amd64 ~x86"

[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

[Sam James]

commit:     2da7d56f947133027de4e5ee089a4d5639ffbbc9
Author:     Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat Mar 13 10:44:03 2021 +0000
Commit:     Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat Mar 13 10:44:03 2021 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=2da7d56f

net-misc/sks: Stabilize 1.1.6_p20200624 amd64, #775665

Signed-off-by: Sam James <sam <AT> gentoo.org>

 net-misc/sks/sks-1.1.6_p20200624.ebuild | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net-misc/sks/sks-1.1.6_p20200624.ebuild b/net-misc/sks/sks-1.1.6_p20200624.ebuild
index 7c9d13994f7..bb6bc66f763 100644
--- a/net-misc/sks/sks-1.1.6_p20200624.ebuild
+++ b/net-misc/sks/sks-1.1.6_p20200624.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2020 Gentoo Authors
+# Copyright 1999-2021 Gentoo Authors
 # Distributed under the terms of the GNU General Public License v2
 
 EAPI=7
@@ -13,7 +13,7 @@ S="${WORKDIR}/${PN}-keyserver-${COMMIT}"
 
 LICENSE="GPL-2"
 SLOT="0"
-KEYWORDS="~amd64 ~x86"
+KEYWORDS="amd64 ~x86"
 IUSE="optimize test"
 RESTRICT="!test? ( test )"
 

[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

[Sam James]

commit:     3f26f66811b276bfba603fa4f85b8065d51fce71
Author:     Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sat Oct 15 14:31:34 2022 +0000
Commit:     Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sat Oct 15 14:31:45 2022 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=3f26f668

net-misc/sks: fix VariableScope

Signed-off-by: Sam James <sam <AT> gentoo.org>

 net-misc/sks/sks-1.1.6_p20200624-r1.ebuild | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/net-misc/sks/sks-1.1.6_p20200624-r1.ebuild b/net-misc/sks/sks-1.1.6_p20200624-r1.ebuild
index 12939b3ef43a..133ea06cb8e7 100644
--- a/net-misc/sks/sks-1.1.6_p20200624-r1.ebuild
+++ b/net-misc/sks/sks-1.1.6_p20200624-r1.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2021 Gentoo Authors
+# Copyright 1999-2022 Gentoo Authors
 # Distributed under the terms of the GNU General Public License v2
 
 EAPI=7
@@ -37,7 +37,7 @@ found at https://bitbucket.org/skskeyserver/sks-keyserver/wiki/Peering"
 RDEPEND="
 	acct-user/sks
 	acct-group/sks
-	>=dev-lang/ocaml-4.0:=
+	<dev-lang/ocaml-4.13:=
 	dev-ml/camlp4:=
 	dev-ml/cryptokit:=
 	dev-ml/num:=
@@ -62,8 +62,6 @@ src_prepare() {
 		-e "s:^BDBLIB=.*$:BDBLIB=-L/usr/$(get_libdir):g" \
 		-e "s:^BDBINCLUDE=.*$:BDBINCLUDE=-I/usr/include/db5.3/:g" \
 		-e "s:^LIBDB=.*$:LIBDB=-ldb-5.3:g" \
-		-e "s:^PREFIX=.*$:PREFIX=${D}/usr:g" \
-		-e "s:^MANDIR=.*$:MANDIR=${D}/usr/share/man:g" \
 		Makefile.local || die
 	sed -i \
 		-e 's:/usr/sbin/sks:/usr/bin/sks:g' \
@@ -89,6 +87,11 @@ src_test() {
 }
 
 src_install() {
+	sed -i \
+		-e "s:^PREFIX=.*$:PREFIX=${ED}/usr:g" \
+		-e "s:^MANDIR=.*$:MANDIR=${ED}/usr/share/man:g" \
+		Makefile.local || die
+
 	if use optimize; then
 		emake install.bc
 		dosym sks.bc usr/bin/sks