[gentoo-commits] repo/gentoo:master commit in: net-misc/sks/

["Kristian Fiskerstrand" <k_f@gentoo.org>]

commit:     089e817e7f81c614b7739dd8118e9babfbcdf3d5
Author:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
AuthorDate: Tue Feb 16 17:40:00 2016 +0000
Commit:     Kristian Fiskerstrand <k_f <AT> gentoo <DOT> org>
CommitDate: Tue Feb 16 17:43:20 2016 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=089e817e

net-misc/sks: Fix ocaml4 dependency

Since ocaml 4 camlp4o is split in a separate package dev-ml/camlp4.
Bump minimum ocaml version to 4 that is now stable already and supported
upstream and add the missing dependency after the split

Bug: 568932

Package-Manager: portage-2.2.27

 net-misc/sks/sks-1.1.5-r3.ebuild | 119 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 119 insertions(+)

diff --git a/net-misc/sks/sks-1.1.5-r3.ebuild b/net-misc/sks/sks-1.1.5-r3.ebuild
new file mode 100644
index 0000000..d242e31
--- /dev/null
+++ b/net-misc/sks/sks-1.1.5-r3.ebuild
@@ -0,0 +1,119 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+inherit multilib user readme.gentoo systemd
+
+DESCRIPTION="An OpenPGP keyserver which is decentralized with highly reliable synchronization"
+HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"
+SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE="optimize test"
+DOC_CONTENTS="To get sks running, first build the database,
+start the databse, import atleast one key, then
+run a cleandb. See the sks man page for more information
+Typical DB_CONFIG file and sksconf has been installed
+in /var/lib/sks and can be used as templates by renaming
+to remove the .typical extension. The DB_CONFIG file has
+to be in place before doing the database build, or the BDB
+environment has to be manually cleared from both KDB and PTree.
+The same applies if you are upgrading to this version with an existing KDB/Ptree,
+using another version of BDB than 4.8; you need to clear the environment
+using e.g. db4.6_recover -h . and db4.6_checkpoint -1h . in both KDB and PTree
+Additionally a sample web interface has been installed as
+web.typical in /var/lib/sks that can be used by renaming it to web
+Important: It is strongly recommended to set up SKS behind a
+reverse proxy. Instructions on properly configuring SKS can be
+found at https://bitbucket.org/skskeyserver/sks-keyserver/wiki/Peering"
+
+DEPEND=">=dev-lang/ocaml-4.0
+	dev-ml/camlp4
+	dev-ml/cryptokit
+	sys-libs/db:4.8"
+RDEPEND="${DEPEND}"
+
+pkg_setup() {
+	ebegin "Creating named group and user"
+	enewgroup sks
+	enewuser sks -1 -1 /var/lib/sks sks
+}
+
+src_prepare() {
+	cp Makefile.local.unused Makefile.local || die
+	sed -i \
+		-e "s:^BDBLIB=.*$:BDBLIB=-L/usr/$(get_libdir):g" \
+		-e "s:^BDBINCLUDE=.*$:BDBINCLUDE=-I/usr/include/db4.8/:g" \
+		-e "s:^LIBDB=.*$:LIBDB=-ldb-4.8:g" \
+		-e "s:^PREFIX=.*$:PREFIX=${D}/usr:g" \
+		-e "s:^MANDIR=.*$:MANDIR=${D}/usr/share/man:g" \
+		Makefile.local || die
+	sed -i \
+		-e 's:^CAMLINCLUDE= -I lib -I bdb$:CAMLINCLUDE= -I lib -I bdb -I +cryptokit:g' \
+		-e 's:-Werror-implicit-function-declaration::g' \
+		Makefile bdb/Makefile || die
+	sed -i \
+		-e 's:/usr/sbin/sks:/usr/bin/sks:g' \
+		sks_build.sh || die
+
+	epatch "${FILESDIR}/${P}-eddsa.patch"
+	epatch "${FILESDIR}/${P}-disable-warn-error-a.patch"
+	epatch "${FILESDIR}/${P}-curve25519.patch"
+}
+
+src_compile() {
+	emake dep
+	# sks build fails with paralell build in module Bdb
+	emake -j1 all
+	if use optimize; then
+		emake all.bc
+	fi
+}
+
+src_test() {
+	./sks unit_test || die
+}
+
+src_install() {
+	if use optimize; then
+		emake install.bc
+		dosym /usr/bin/sks.bc usr/bin/sks
+		dosym /usr/bin/sks_add_mail.bc usr/bin/sks_add_mail
+	else
+		emake install
+	fi
+
+	dodoc README.md
+
+	newinitd "${FILESDIR}/sks-db.initd" sks-db
+	newinitd "${FILESDIR}/sks-recon.initd" sks-recon
+	newconfd "${FILESDIR}/sks.confd" sks
+	systemd_dounit "${FILESDIR}"/sks-db.service
+	systemd_dounit "${FILESDIR}"/sks-recon.service
+
+	dodir "/var/lib/sks/web.typical"
+	insinto /var/lib/sks
+	newins sampleConfig/DB_CONFIG DB_CONFIG.typical
+	newins sampleConfig/sksconf.typical sksconf.typical
+	insinto /var/lib/sks/web.typical
+	doins sampleWeb/HTML5/*
+
+	keepdir /var/lib/sks
+	readme.gentoo_create_doc
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+
+	if [[ -n ${REPLACING_VERSIONS} ]]; then
+		einfo "Note when upgrading from versions of SKS earlier than 1.1.4"
+		einfo "The default values for pagesize settings have changed. To continue"
+		einfo "using an existing DB without rebuilding, explicit settings have to be"
+		einfo "added to the sksconf file."
+		einfo "pagesize:       4"
+		einfo "ptree_pagesize: 1"
+	fi;
+}