[gentoo-commits] repo/gentoo:master commit in: app-emulation/qemu/, app-emulation/qemu/files/

["Mike Frysinger" <vapier@gentoo.org>]

commit:     96bdea53ec5c2e6d80e30b288043e34bfc766e25
Author:     Mike Frysinger <vapier <AT> gentoo <DOT> org>
AuthorDate: Mon Jan 18 04:55:24 2016 +0000
Commit:     Mike Frysinger <vapier <AT> gentoo <DOT> org>
CommitDate: Mon Jan 18 04:56:28 2016 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=96bdea53

app-emulation/qemu: add upstream fixes for #567868 #568246 #570110 #570988 #571566

 .../qemu/files/qemu-2.5.0-CVE-2015-8558.patch      |  50 ++
 .../qemu/files/qemu-2.5.0-CVE-2015-8567.patch      |  95 +++
 .../qemu/files/qemu-2.5.0-CVE-2015-8701.patch      |  49 ++
 .../qemu/files/qemu-2.5.0-CVE-2015-8743.patch      |  50 ++
 .../qemu/files/qemu-2.5.0-CVE-2016-1568.patch      |  41 ++
 app-emulation/qemu/qemu-2.5.0-r1.ebuild            | 657 +++++++++++++++++++++
 6 files changed, 942 insertions(+)

diff --git a/app-emulation/qemu/files/qemu-2.5.0-CVE-2015-8558.patch b/app-emulation/qemu/files/qemu-2.5.0-CVE-2015-8558.patch
new file mode 100644
index 0000000..fbc6a0a
--- /dev/null
+++ b/app-emulation/qemu/files/qemu-2.5.0-CVE-2015-8558.patch
@@ -0,0 +1,50 @@
+https://bugs.gentoo.org/568246
+
+From 156a2e4dbffa85997636a7a39ef12da6f1b40254 Mon Sep 17 00:00:00 2001
+From: Gerd Hoffmann <kraxel@redhat.com>
+Date: Mon, 14 Dec 2015 09:21:23 +0100
+Subject: [PATCH] ehci: make idt processing more robust
+
+Make ehci_process_itd return an error in case we didn't do any actual
+iso transfer because we've found no active transaction.  That'll avoid
+ehci happily run in circles forever if the guest builds a loop out of
+idts.
+
+This is CVE-2015-8558.
+
+Cc: qemu-stable@nongnu.org
+Reported-by: Qinghao Tang <luodalongde@gmail.com>
+Tested-by: P J P <ppandit@redhat.com>
+Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
+---
+ hw/usb/hcd-ehci.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
+index 4e2161b..d07f228 100644
+--- a/hw/usb/hcd-ehci.c
++++ b/hw/usb/hcd-ehci.c
+@@ -1389,7 +1389,7 @@ static int ehci_process_itd(EHCIState *ehci,
+ {
+     USBDevice *dev;
+     USBEndpoint *ep;
+-    uint32_t i, len, pid, dir, devaddr, endp;
++    uint32_t i, len, pid, dir, devaddr, endp, xfers = 0;
+     uint32_t pg, off, ptr1, ptr2, max, mult;
+ 
+     ehci->periodic_sched_active = PERIODIC_ACTIVE;
+@@ -1479,9 +1479,10 @@ static int ehci_process_itd(EHCIState *ehci,
+                 ehci_raise_irq(ehci, USBSTS_INT);
+             }
+             itd->transact[i] &= ~ITD_XACT_ACTIVE;
++            xfers++;
+         }
+     }
+-    return 0;
++    return xfers ? 0 : -1;
+ }
+ 
+ 
+-- 
+2.6.2
+

diff --git a/app-emulation/qemu/files/qemu-2.5.0-CVE-2015-8567.patch b/app-emulation/qemu/files/qemu-2.5.0-CVE-2015-8567.patch
new file mode 100644
index 0000000..e196043
--- /dev/null
+++ b/app-emulation/qemu/files/qemu-2.5.0-CVE-2015-8567.patch
@@ -0,0 +1,95 @@
+https://bugs.gentoo.org/567868
+
+From aa4a3dce1c88ed51b616806b8214b7c8428b7470 Mon Sep 17 00:00:00 2001
+From: P J P <ppandit@redhat.com>
+Date: Tue, 15 Dec 2015 12:27:54 +0530
+Subject: [PATCH] net: vmxnet3: avoid memory leakage in activate_device
+
+Vmxnet3 device emulator does not check if the device is active
+before activating it, also it did not free the transmit & receive
+buffers while deactivating the device, thus resulting in memory
+leakage on the host. This patch fixes both these issues to avoid
+host memory leakage.
+
+Reported-by: Qinghao Tang <luodalongde@gmail.com>
+Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
+Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
+Cc: qemu-stable@nongnu.org
+Signed-off-by: Jason Wang <jasowang@redhat.com>
+---
+ hw/net/vmxnet3.c | 24 ++++++++++++++++--------
+ 1 file changed, 16 insertions(+), 8 deletions(-)
+
+diff --git a/hw/net/vmxnet3.c b/hw/net/vmxnet3.c
+index a5dd79a..9c1adfc 100644
+--- a/hw/net/vmxnet3.c
++++ b/hw/net/vmxnet3.c
+@@ -1194,8 +1194,13 @@ static void vmxnet3_reset_mac(VMXNET3State *s)
+ 
+ static void vmxnet3_deactivate_device(VMXNET3State *s)
+ {
+-    VMW_CBPRN("Deactivating vmxnet3...");
+-    s->device_active = false;
++    if (s->device_active) {
++        VMW_CBPRN("Deactivating vmxnet3...");
++        vmxnet_tx_pkt_reset(s->tx_pkt);
++        vmxnet_tx_pkt_uninit(s->tx_pkt);
++        vmxnet_rx_pkt_uninit(s->rx_pkt);
++        s->device_active = false;
++    }
+ }
+ 
+ static void vmxnet3_reset(VMXNET3State *s)
+@@ -1204,7 +1209,6 @@ static void vmxnet3_reset(VMXNET3State *s)
+ 
+     vmxnet3_deactivate_device(s);
+     vmxnet3_reset_interrupt_states(s);
+-    vmxnet_tx_pkt_reset(s->tx_pkt);
+     s->drv_shmem = 0;
+     s->tx_sop = true;
+     s->skip_current_tx_pkt = false;
+@@ -1431,6 +1435,12 @@ static void vmxnet3_activate_device(VMXNET3State *s)
+         return;
+     }
+ 
++    /* Verify if device is active */
++    if (s->device_active) {
++        VMW_CFPRN("Vmxnet3 device is active");
++        return;
++    }
++
+     vmxnet3_adjust_by_guest_type(s);
+     vmxnet3_update_features(s);
+     vmxnet3_update_pm_state(s);
+@@ -1627,7 +1637,7 @@ static void vmxnet3_handle_command(VMXNET3State *s, uint64_t cmd)
+         break;
+ 
+     case VMXNET3_CMD_QUIESCE_DEV:
+-        VMW_CBPRN("Set: VMXNET3_CMD_QUIESCE_DEV - pause the device");
++        VMW_CBPRN("Set: VMXNET3_CMD_QUIESCE_DEV - deactivate the device");
+         vmxnet3_deactivate_device(s);
+         break;
+ 
+@@ -1741,7 +1751,7 @@ vmxnet3_io_bar1_write(void *opaque,
+          * shared address only after we get the high part
+          */
+         if (val == 0) {
+-            s->device_active = false;
++            vmxnet3_deactivate_device(s);
+         }
+         s->temp_shared_guest_driver_memory = val;
+         s->drv_shmem = 0;
+@@ -2021,9 +2031,7 @@ static bool vmxnet3_peer_has_vnet_hdr(VMXNET3State *s)
+ static void vmxnet3_net_uninit(VMXNET3State *s)
+ {
+     g_free(s->mcast_list);
+-    vmxnet_tx_pkt_reset(s->tx_pkt);
+-    vmxnet_tx_pkt_uninit(s->tx_pkt);
+-    vmxnet_rx_pkt_uninit(s->rx_pkt);
++    vmxnet3_deactivate_device(s);
+     qemu_del_nic(s->nic);
+ }
+ 
+-- 
+2.6.2
+

diff --git a/app-emulation/qemu/files/qemu-2.5.0-CVE-2015-8701.patch b/app-emulation/qemu/files/qemu-2.5.0-CVE-2015-8701.patch
new file mode 100644
index 0000000..0dab1c3
--- /dev/null
+++ b/app-emulation/qemu/files/qemu-2.5.0-CVE-2015-8701.patch
@@ -0,0 +1,49 @@
+https://bugs.gentoo.org/570110
+
+From 007cd223de527b5f41278f2d886c1a4beb3e67aa Mon Sep 17 00:00:00 2001
+From: Prasad J Pandit <pjp@fedoraproject.org>
+Date: Mon, 28 Dec 2015 16:24:08 +0530
+Subject: [PATCH] net: rocker: fix an incorrect array bounds check
+
+While processing transmit(tx) descriptors in 'tx_consume' routine
+the switch emulator suffers from an off-by-one error, if a
+descriptor was to have more than allowed(ROCKER_TX_FRAGS_MAX=16)
+fragments. Fix an incorrect bounds check to avoid it.
+
+Reported-by: Qinghao Tang <luodalongde@gmail.com>
+Cc: qemu-stable@nongnu.org
+Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
+Signed-off-by: Jason Wang <jasowang@redhat.com>
+---
+ hw/net/rocker/rocker.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/hw/net/rocker/rocker.c b/hw/net/rocker/rocker.c
+index c57f1a6..2e77e50 100644
+--- a/hw/net/rocker/rocker.c
++++ b/hw/net/rocker/rocker.c
+@@ -232,6 +232,9 @@ static int tx_consume(Rocker *r, DescInfo *info)
+         frag_addr = rocker_tlv_get_le64(tlvs[ROCKER_TLV_TX_FRAG_ATTR_ADDR]);
+         frag_len = rocker_tlv_get_le16(tlvs[ROCKER_TLV_TX_FRAG_ATTR_LEN]);
+ 
++        if (iovcnt >= ROCKER_TX_FRAGS_MAX) {
++            goto err_too_many_frags;
++        }
+         iov[iovcnt].iov_len = frag_len;
+         iov[iovcnt].iov_base = g_malloc(frag_len);
+         if (!iov[iovcnt].iov_base) {
+@@ -244,10 +247,7 @@ static int tx_consume(Rocker *r, DescInfo *info)
+             err = -ROCKER_ENXIO;
+             goto err_bad_io;
+         }
+-
+-        if (++iovcnt > ROCKER_TX_FRAGS_MAX) {
+-            goto err_too_many_frags;
+-        }
++        iovcnt++;
+     }
+ 
+     if (iovcnt) {
+-- 
+2.6.2
+

diff --git a/app-emulation/qemu/files/qemu-2.5.0-CVE-2015-8743.patch b/app-emulation/qemu/files/qemu-2.5.0-CVE-2015-8743.patch
new file mode 100644
index 0000000..b2bca56
--- /dev/null
+++ b/app-emulation/qemu/files/qemu-2.5.0-CVE-2015-8743.patch
@@ -0,0 +1,50 @@
+https://bugs.gentoo.org/570988
+
+From aa7f9966dfdff500bbbf1956d9e115b1fa8987a6 Mon Sep 17 00:00:00 2001
+From: Prasad J Pandit <pjp@fedoraproject.org>
+Date: Thu, 31 Dec 2015 17:05:27 +0530
+Subject: [PATCH] net: ne2000: fix bounds check in ioport operations
+
+While doing ioport r/w operations, ne2000 device emulation suffers
+from OOB r/w errors. Update respective array bounds check to avoid
+OOB access.
+
+Reported-by: Ling Liu <liuling-it@360.cn>
+Cc: qemu-stable@nongnu.org
+Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
+Signed-off-by: Jason Wang <jasowang@redhat.com>
+---
+ hw/net/ne2000.c | 10 ++++++----
+ 1 file changed, 6 insertions(+), 4 deletions(-)
+
+diff --git a/hw/net/ne2000.c b/hw/net/ne2000.c
+index 010f9ef..a3dffff 100644
+--- a/hw/net/ne2000.c
++++ b/hw/net/ne2000.c
+@@ -467,8 +467,9 @@ static inline void ne2000_mem_writel(NE2000State *s, uint32_t addr,
+                                      uint32_t val)
+ {
+     addr &= ~1; /* XXX: check exact behaviour if not even */
+-    if (addr < 32 ||
+-        (addr >= NE2000_PMEM_START && addr < NE2000_MEM_SIZE)) {
++    if (addr < 32
++        || (addr >= NE2000_PMEM_START
++            && addr + sizeof(uint32_t) <= NE2000_MEM_SIZE)) {
+         stl_le_p(s->mem + addr, val);
+     }
+ }
+@@ -497,8 +498,9 @@ static inline uint32_t ne2000_mem_readw(NE2000State *s, uint32_t addr)
+ static inline uint32_t ne2000_mem_readl(NE2000State *s, uint32_t addr)
+ {
+     addr &= ~1; /* XXX: check exact behaviour if not even */
+-    if (addr < 32 ||
+-        (addr >= NE2000_PMEM_START && addr < NE2000_MEM_SIZE)) {
++    if (addr < 32
++        || (addr >= NE2000_PMEM_START
++            && addr + sizeof(uint32_t) <= NE2000_MEM_SIZE)) {
+         return ldl_le_p(s->mem + addr);
+     } else {
+         return 0xffffffff;
+-- 
+2.6.2
+

diff --git a/app-emulation/qemu/files/qemu-2.5.0-CVE-2016-1568.patch b/app-emulation/qemu/files/qemu-2.5.0-CVE-2016-1568.patch
new file mode 100644
index 0000000..4ce9a35
--- /dev/null
+++ b/app-emulation/qemu/files/qemu-2.5.0-CVE-2016-1568.patch
@@ -0,0 +1,41 @@
+https://bugs.gentoo.org/571566
+
+From 4ab0359a8ae182a7ac5c99609667273167703fab Mon Sep 17 00:00:00 2001
+From: Prasad J Pandit <pjp@fedoraproject.org>
+Date: Mon, 11 Jan 2016 14:10:42 -0500
+Subject: [PATCH] ide: ahci: reset ncq object to unused on error
+
+When processing NCQ commands, AHCI device emulation prepares a
+NCQ transfer object; To which an aio control block(aiocb) object
+is assigned in 'execute_ncq_command'. In case, when the NCQ
+command is invalid, the 'aiocb' object is not assigned, and NCQ
+transfer object is left as 'used'. This leads to a use after
+free kind of error in 'bdrv_aio_cancel_async' via 'ahci_reset_port'.
+Reset NCQ transfer object to 'unused' to avoid it.
+
+[Maintainer edit: s/ACHI/AHCI/ in the commit message. --js]
+
+Reported-by: Qinghao Tang <luodalongde@gmail.com>
+Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
+Reviewed-by: John Snow <jsnow@redhat.com>
+Message-id: 1452282511-4116-1-git-send-email-ppandit@redhat.com
+Signed-off-by: John Snow <jsnow@redhat.com>
+---
+ hw/ide/ahci.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
+index dd1912e..17f1cbd 100644
+--- a/hw/ide/ahci.c
++++ b/hw/ide/ahci.c
+@@ -910,6 +910,7 @@ static void ncq_err(NCQTransferState *ncq_tfs)
+     ide_state->error = ABRT_ERR;
+     ide_state->status = READY_STAT | ERR_STAT;
+     ncq_tfs->drive->port_regs.scr_err |= (1 << ncq_tfs->tag);
++    ncq_tfs->used = 0;
+ }
+ 
+ static void ncq_finish(NCQTransferState *ncq_tfs)
+-- 
+2.6.2
+

diff --git a/app-emulation/qemu/qemu-2.5.0-r1.ebuild b/app-emulation/qemu/qemu-2.5.0-r1.ebuild
new file mode 100644
index 0000000..9f61eb3
--- /dev/null
+++ b/app-emulation/qemu/qemu-2.5.0-r1.ebuild
@@ -0,0 +1,657 @@
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+PYTHON_COMPAT=( python2_7 )
+PYTHON_REQ_USE="ncurses,readline"
+
+inherit eutils flag-o-matic linux-info toolchain-funcs multilib python-r1 \
+	user udev fcaps readme.gentoo pax-utils
+
+BACKPORTS=
+
+if [[ ${PV} = *9999* ]]; then
+	EGIT_REPO_URI="git://git.qemu.org/qemu.git"
+	inherit git-2
+	SRC_URI=""
+else
+	SRC_URI="http://wiki.qemu-project.org/download/${P}.tar.bz2
+	${BACKPORTS:+
+		https://dev.gentoo.org/~cardoe/distfiles/${P}-${BACKPORTS}.tar.xz}"
+	KEYWORDS="~amd64 ~ppc ~ppc64 ~x86 ~x86-fbsd"
+fi
+
+DESCRIPTION="QEMU + Kernel-based Virtual Machine userland tools"
+HOMEPAGE="http://www.qemu.org http://www.linux-kvm.org"
+
+LICENSE="GPL-2 LGPL-2 BSD-2"
+SLOT="0"
+IUSE="accessibility +aio alsa bluetooth +caps +curl debug +fdt glusterfs \
+gnutls gtk gtk2 infiniband iscsi +jpeg \
+kernel_linux kernel_FreeBSD lzo ncurses nfs nls numa opengl +pin-upstream-blobs
++png pulseaudio python \
+rbd sasl +seccomp sdl sdl2 selinux smartcard snappy spice ssh static static-softmmu
+static-user systemtap tci test +threads usb usbredir +uuid vde +vhost-net \
+virgl virtfs +vnc vte xattr xen xfs"
+
+COMMON_TARGETS="aarch64 alpha arm cris i386 m68k microblaze microblazeel mips
+mips64 mips64el mipsel or32 ppc ppc64 s390x sh4 sh4eb sparc sparc64 unicore32
+x86_64"
+IUSE_SOFTMMU_TARGETS="${COMMON_TARGETS} lm32 moxie ppcemb tricore xtensa xtensaeb"
+IUSE_USER_TARGETS="${COMMON_TARGETS} armeb mipsn32 mipsn32el ppc64abi32 ppc64le sparc32plus tilegx"
+
+use_softmmu_targets=$(printf ' qemu_softmmu_targets_%s' ${IUSE_SOFTMMU_TARGETS})
+use_user_targets=$(printf ' qemu_user_targets_%s' ${IUSE_USER_TARGETS})
+IUSE+=" ${use_softmmu_targets} ${use_user_targets}"
+
+# Allow no targets to be built so that people can get a tools-only build.
+# Block USE flag configurations known to not work.
+REQUIRED_USE="${PYTHON_REQUIRED_USE}
+	gtk2? ( gtk )
+	qemu_softmmu_targets_arm? ( fdt )
+	qemu_softmmu_targets_microblaze? ( fdt )
+	qemu_softmmu_targets_ppc? ( fdt )
+	qemu_softmmu_targets_ppc64? ( fdt )
+	sdl2? ( sdl )
+	static? ( static-softmmu static-user )
+	static-softmmu? ( !alsa !pulseaudio !bluetooth !opengl !gtk !gtk2 )
+	virtfs? ( xattr )
+	vte? ( gtk )"
+
+# Yep, you need both libcap and libcap-ng since virtfs only uses libcap.
+#
+# The attr lib isn't always linked in (although the USE flag is always
+# respected).  This is because qemu supports using the C library's API
+# when available rather than always using the extranl library.
+#
+# Older versions of gnutls are supported, but it's simpler to just require
+# the latest versions.  This is also why we require nettle.
+COMMON_LIB_DEPEND=">=dev-libs/glib-2.0[static-libs(+)]
+	sys-libs/zlib[static-libs(+)]
+	xattr? ( sys-apps/attr[static-libs(+)] )"
+SOFTMMU_LIB_DEPEND="${COMMON_LIB_DEPEND}
+	>=x11-libs/pixman-0.28.0[static-libs(+)]
+	accessibility? ( app-accessibility/brltty[static-libs(+)] )
+	aio? ( dev-libs/libaio[static-libs(+)] )
+	alsa? ( >=media-libs/alsa-lib-1.0.13 )
+	bluetooth? ( net-wireless/bluez )
+	caps? ( sys-libs/libcap-ng[static-libs(+)] )
+	curl? ( >=net-misc/curl-7.15.4[static-libs(+)] )
+	fdt? ( >=sys-apps/dtc-1.4.0[static-libs(+)] )
+	glusterfs? ( >=sys-cluster/glusterfs-3.4.0[static-libs(+)] )
+	gnutls? (
+		dev-libs/nettle[static-libs(+)]
+		>=net-libs/gnutls-3.0[static-libs(+)]
+	)
+	gtk? (
+		gtk2? (
+			x11-libs/gtk+:2
+			vte? ( x11-libs/vte:0 )
+		)
+		!gtk2? (
+			x11-libs/gtk+:3
+			vte? ( x11-libs/vte:2.90 )
+		)
+	)
+	infiniband? ( sys-infiniband/librdmacm:=[static-libs(+)] )
+	iscsi? ( net-libs/libiscsi )
+	jpeg? ( virtual/jpeg:=[static-libs(+)] )
+	lzo? ( dev-libs/lzo:2[static-libs(+)] )
+	ncurses? ( sys-libs/ncurses:0=[static-libs(+)] )
+	nfs? ( >=net-fs/libnfs-1.9.3[static-libs(+)] )
+	numa? ( sys-process/numactl[static-libs(+)] )
+	opengl? (
+		virtual/opengl
+		media-libs/libepoxy[static-libs(+)]
+		media-libs/mesa[static-libs(+)]
+		media-libs/mesa[egl,gles2]
+	)
+	png? ( media-libs/libpng:0=[static-libs(+)] )
+	pulseaudio? ( media-sound/pulseaudio )
+	rbd? ( sys-cluster/ceph[static-libs(+)] )
+	sasl? ( dev-libs/cyrus-sasl[static-libs(+)] )
+	sdl? (
+		!sdl2? (
+			media-libs/libsdl[X]
+			>=media-libs/libsdl-1.2.11[static-libs(+)]
+		)
+		sdl2? (
+			media-libs/libsdl2[X]
+			media-libs/libsdl2[static-libs(+)]
+		)
+	)
+	seccomp? ( >=sys-libs/libseccomp-2.1.0[static-libs(+)] )
+	smartcard? ( >=app-emulation/libcacard-2.5.0[static-libs(+)] )
+	snappy? ( app-arch/snappy[static-libs(+)] )
+	spice? (
+		>=app-emulation/spice-protocol-0.12.3
+		>=app-emulation/spice-0.12.0[static-libs(+)]
+	)
+	ssh? ( >=net-libs/libssh2-1.2.8[static-libs(+)] )
+	usb? ( >=virtual/libusb-1-r2[static-libs(+)] )
+	usbredir? ( >=sys-apps/usbredir-0.6[static-libs(+)] )
+	uuid? ( >=sys-apps/util-linux-2.16.0[static-libs(+)] )
+	vde? ( net-misc/vde[static-libs(+)] )
+	virgl? ( media-libs/virglrenderer[static-libs(+)] )
+	virtfs? ( sys-libs/libcap )
+	xfs? ( sys-fs/xfsprogs[static-libs(+)] )"
+USER_LIB_DEPEND="${COMMON_LIB_DEPEND}"
+X86_FIRMWARE_DEPEND="
+	>=sys-firmware/ipxe-1.0.0_p20130624
+	pin-upstream-blobs? (
+		~sys-firmware/seabios-1.8.2
+		~sys-firmware/sgabios-0.1_pre8
+		~sys-firmware/vgabios-0.7a
+	)
+	!pin-upstream-blobs? (
+		sys-firmware/seabios
+		sys-firmware/sgabios
+		sys-firmware/vgabios
+	)"
+CDEPEND="
+	!static-softmmu? ( $(printf "%s? ( ${SOFTMMU_LIB_DEPEND//\[static-libs(+)]} ) " ${use_softmmu_targets}) )
+	!static-user? ( $(printf "%s? ( ${USER_LIB_DEPEND//\[static-libs(+)]} ) " ${use_user_targets}) )
+	qemu_softmmu_targets_i386? ( ${X86_FIRMWARE_DEPEND} )
+	qemu_softmmu_targets_x86_64? ( ${X86_FIRMWARE_DEPEND} )
+	python? ( ${PYTHON_DEPS} )
+	systemtap? ( dev-util/systemtap )
+	xen? ( app-emulation/xen-tools:= )"
+DEPEND="${CDEPEND}
+	dev-lang/perl
+	=dev-lang/python-2*
+	sys-apps/texinfo
+	virtual/pkgconfig
+	kernel_linux? ( >=sys-kernel/linux-headers-2.6.35 )
+	gtk? ( nls? ( sys-devel/gettext ) )
+	static-softmmu? ( $(printf "%s? ( ${SOFTMMU_LIB_DEPEND} ) " ${use_softmmu_targets}) )
+	static-user? ( $(printf "%s? ( ${USER_LIB_DEPEND} ) " ${use_user_targets}) )
+	test? (
+		dev-libs/glib[utils]
+		sys-devel/bc
+	)"
+RDEPEND="${CDEPEND}
+	selinux? ( sec-policy/selinux-qemu )
+"
+
+STRIP_MASK="/usr/share/qemu/palcode-clipper"
+
+QA_PREBUILT="
+	usr/share/qemu/openbios-ppc
+	usr/share/qemu/openbios-sparc64
+	usr/share/qemu/openbios-sparc32
+	usr/share/qemu/palcode-clipper
+	usr/share/qemu/s390-ccw.img
+	usr/share/qemu/u-boot.e500
+"
+
+QA_WX_LOAD="usr/bin/qemu-i386
+	usr/bin/qemu-x86_64
+	usr/bin/qemu-alpha
+	usr/bin/qemu-arm
+	usr/bin/qemu-cris
+	usr/bin/qemu-m68k
+	usr/bin/qemu-microblaze
+	usr/bin/qemu-microblazeel
+	usr/bin/qemu-mips
+	usr/bin/qemu-mipsel
+	usr/bin/qemu-or32
+	usr/bin/qemu-ppc
+	usr/bin/qemu-ppc64
+	usr/bin/qemu-ppc64abi32
+	usr/bin/qemu-sh4
+	usr/bin/qemu-sh4eb
+	usr/bin/qemu-sparc
+	usr/bin/qemu-sparc64
+	usr/bin/qemu-armeb
+	usr/bin/qemu-sparc32plus
+	usr/bin/qemu-s390x
+	usr/bin/qemu-unicore32"
+
+DOC_CONTENTS="If you don't have kvm compiled into the kernel, make sure
+you have the kernel module loaded before running kvm. The easiest way to
+ensure that the kernel module is loaded is to load it on boot.\n
+For AMD CPUs the module is called 'kvm-amd'\n
+For Intel CPUs the module is called 'kvm-intel'\n
+Please review /etc/conf.d/modules for how to load these\n\n
+Make sure your user is in the 'kvm' group\n
+Just run 'gpasswd -a <USER> kvm', then have <USER> re-login."
+
+qemu_support_kvm() {
+	if use qemu_softmmu_targets_x86_64 || use qemu_softmmu_targets_i386 \
+		use qemu_softmmu_targets_ppc || use qemu_softmmu_targets_ppc64 \
+		use qemu_softmmu_targets_s390x; then
+		return 0
+	fi
+
+	return 1
+}
+
+pkg_pretend() {
+	if use kernel_linux && kernel_is lt 2 6 25; then
+		eerror "This version of KVM requres a host kernel of 2.6.25 or higher."
+	elif use kernel_linux; then
+		if ! linux_config_exists; then
+			eerror "Unable to check your kernel for KVM support"
+		else
+			CONFIG_CHECK="~KVM ~TUN ~BRIDGE"
+			ERROR_KVM="You must enable KVM in your kernel to continue"
+			ERROR_KVM_AMD="If you have an AMD CPU, you must enable KVM_AMD in"
+			ERROR_KVM_AMD+=" your kernel configuration."
+			ERROR_KVM_INTEL="If you have an Intel CPU, you must enable"
+			ERROR_KVM_INTEL+=" KVM_INTEL in your kernel configuration."
+			ERROR_TUN="You will need the Universal TUN/TAP driver compiled"
+			ERROR_TUN+=" into your kernel or loaded as a module to use the"
+			ERROR_TUN+=" virtual network device if using -net tap."
+			ERROR_BRIDGE="You will also need support for 802.1d"
+			ERROR_BRIDGE+=" Ethernet Bridging for some network configurations."
+			use vhost-net && CONFIG_CHECK+=" ~VHOST_NET"
+			ERROR_VHOST_NET="You must enable VHOST_NET to have vhost-net"
+			ERROR_VHOST_NET+=" support"
+
+			if use amd64 || use x86 || use amd64-linux || use x86-linux; then
+				CONFIG_CHECK+=" ~KVM_AMD ~KVM_INTEL"
+			fi
+
+			use python && CONFIG_CHECK+=" ~DEBUG_FS"
+			ERROR_DEBUG_FS="debugFS support required for kvm_stat"
+
+			# Now do the actual checks setup above
+			check_extra_config
+		fi
+	fi
+
+	if grep -qs '/usr/bin/qemu-kvm' "${EROOT}"/etc/libvirt/qemu/*.xml; then
+		eerror "The kvm/qemu-kvm wrappers no longer exist, but your libvirt"
+		eerror "instances are still pointing to it.  Please update your"
+		eerror "configs in /etc/libvirt/qemu/ to use the -enable-kvm flag"
+		eerror "and the right system binary (e.g. qemu-system-x86_64)."
+		die "update your virt configs to not use qemu-kvm"
+	fi
+}
+
+pkg_setup() {
+	enewgroup kvm 78
+}
+
+# Sanity check to make sure target lists are kept up-to-date.
+check_targets() {
+	local var=$1 mak=$2
+	local detected sorted
+
+	pushd "${S}"/default-configs >/dev/null || die
+
+	# Force C locale until glibc is updated. #564936
+	detected=$(echo $(printf '%s\n' *-${mak}.mak | sed "s:-${mak}.mak::" | LC_COLLATE=C sort -u))
+	sorted=$(echo $(printf '%s\n' ${!var} | LC_COLLATE=C sort -u))
+	if [[ ${sorted} != "${detected}" ]] ; then
+		eerror "The ebuild needs to be kept in sync."
+		eerror "${var}: ${sorted}"
+		eerror "$(printf '%-*s' ${#var} configure): ${detected}"
+		die "sync ${var} to the list of targets"
+	fi
+
+	popd >/dev/null
+}
+
+src_prepare() {
+	check_targets IUSE_SOFTMMU_TARGETS softmmu
+	check_targets IUSE_USER_TARGETS linux-user
+
+	# Alter target makefiles to accept CFLAGS set via flag-o
+	sed -i -r \
+		-e 's/^(C|OP_C|HELPER_C)FLAGS=/\1FLAGS+=/' \
+		Makefile Makefile.target || die
+
+	# Cheap hack to disable gettext .mo generation.
+	use nls || rm -f po/*.po
+
+	epatch "${FILESDIR}"/qemu-2.5.0-cflags.patch
+	[[ -n ${BACKPORTS} ]] && \
+		EPATCH_FORCE=yes EPATCH_SUFFIX="patch" EPATCH_SOURCE="${S}/patches" \
+			epatch
+
+	epatch "${FILESDIR}"/${P}-CVE-2015-8567.patch #567868
+	epatch "${FILESDIR}"/${P}-CVE-2015-8558.patch #568246
+	epatch "${FILESDIR}"/${P}-CVE-2015-8701.patch #570110
+	epatch "${FILESDIR}"/${P}-CVE-2015-8743.patch #570988
+	epatch "${FILESDIR}"/${P}-CVE-2016-1568.patch #571566
+
+	# Fix ld and objcopy being called directly
+	tc-export AR LD OBJCOPY
+
+	# Verbose builds
+	MAKEOPTS+=" V=1"
+
+	epatch_user
+}
+
+##
+# configures qemu based on the build directory and the build type
+# we are using.
+#
+qemu_src_configure() {
+	debug-print-function ${FUNCNAME} "$@"
+
+	local buildtype=$1
+	local builddir="${S}/${buildtype}-build"
+	local static_flag="static-${buildtype}"
+
+	mkdir "${builddir}"
+
+	local conf_opts=(
+		--prefix=/usr
+		--sysconfdir=/etc
+		--libdir=/usr/$(get_libdir)
+		--docdir=/usr/share/doc/${PF}/html
+		--disable-bsd-user
+		--disable-guest-agent
+		--disable-strip
+		--disable-werror
+		# We support gnutls/nettle for crypto operations.  It is possible
+		# to use gcrypt when gnutls/nettle are disabled (but not when they
+		# are enabled), but it's not really worth the hassle.  Disable it
+		# all the time to avoid automatically detecting it. #568856
+		--disable-gcrypt
+		--python="${PYTHON}"
+		--cc="$(tc-getCC)"
+		--cxx="$(tc-getCXX)"
+		--host-cc="$(tc-getBUILD_CC)"
+		$(use_enable debug debug-info)
+		$(use_enable debug debug-tcg)
+		--enable-docs
+		$(use_enable tci tcg-interpreter)
+		$(use_enable xattr attr)
+	)
+
+	# Disable options not used by user targets as the default configure
+	# options will autoprobe and try to link in a bunch of unused junk.
+	conf_softmmu() {
+		if [[ ${buildtype} == "user" ]] ; then
+			echo "--disable-${2:-$1}"
+		else
+			use_enable "$@"
+		fi
+	}
+	conf_opts+=(
+		$(conf_softmmu accessibility brlapi)
+		$(conf_softmmu aio linux-aio)
+		$(conf_softmmu bluetooth bluez)
+		$(conf_softmmu caps cap-ng)
+		$(conf_softmmu curl)
+		$(conf_softmmu fdt)
+		$(conf_softmmu glusterfs)
+		$(conf_softmmu gnutls)
+		$(conf_softmmu gnutls nettle)
+		$(conf_softmmu gtk)
+		$(conf_softmmu infiniband rdma)
+		$(conf_softmmu iscsi libiscsi)
+		$(conf_softmmu jpeg vnc-jpeg)
+		$(conf_softmmu kernel_linux kvm)
+		$(conf_softmmu lzo)
+		$(conf_softmmu ncurses curses)
+		$(conf_softmmu nfs libnfs)
+		$(conf_softmmu numa)
+		$(conf_softmmu opengl)
+		$(conf_softmmu png vnc-png)
+		$(conf_softmmu rbd)
+		$(conf_softmmu sasl vnc-sasl)
+		$(conf_softmmu sdl)
+		$(conf_softmmu seccomp)
+		$(conf_softmmu smartcard)
+		$(conf_softmmu snappy)
+		$(conf_softmmu spice)
+		$(conf_softmmu ssh libssh2)
+		$(conf_softmmu usb libusb)
+		$(conf_softmmu usbredir usb-redir)
+		$(conf_softmmu uuid)
+		$(conf_softmmu vde)
+		$(conf_softmmu vhost-net)
+		$(conf_softmmu virgl virglrenderer)
+		$(conf_softmmu virtfs)
+		$(conf_softmmu vnc)
+		$(conf_softmmu vte)
+		$(conf_softmmu xen)
+		$(conf_softmmu xen xen-pci-passthrough)
+		$(conf_softmmu xfs xfsctl)
+	)
+
+	case ${buildtype} in
+	user)
+		conf_opts+=(
+			--enable-linux-user
+			--disable-system
+			--disable-blobs
+			--disable-tools
+		)
+		;;
+	softmmu)
+		# audio options
+		local audio_opts="oss"
+		use alsa && audio_opts="alsa,${audio_opts}"
+		use sdl && audio_opts="sdl,${audio_opts}"
+		use pulseaudio && audio_opts="pa,${audio_opts}"
+
+		conf_opts+=(
+			--disable-linux-user
+			--enable-system
+			--with-system-pixman
+			--audio-drv-list="${audio_opts}"
+		)
+		use gtk && conf_opts+=( --with-gtkabi=$(usex gtk2 2.0 3.0) )
+		use sdl && conf_opts+=( --with-sdlabi=$(usex sdl2 2.0 1.2) )
+		;;
+	tools)
+		conf_opts+=(
+			--disable-linux-user
+			--disable-system
+			--disable-blobs
+		)
+		static_flag="static"
+		;;
+	esac
+
+	local targets="${buildtype}_targets"
+	[[ -n ${targets} ]] && conf_opts+=( --target-list="${!targets}" )
+
+	# Add support for SystemTAP
+	use systemtap && conf_opts+=( --enable-trace-backend=dtrace )
+
+	# We always want to attempt to build with PIE support as it results
+	# in a more secure binary. But it doesn't work with static or if
+	# the current GCC doesn't have PIE support.
+	if use ${static_flag}; then
+		conf_opts+=( --static --disable-pie )
+	else
+		gcc-specs-pie && conf_opts+=( --enable-pie )
+	fi
+
+	echo "../configure ${conf_opts[*]}"
+	cd "${builddir}"
+	../configure "${conf_opts[@]}" || die "configure failed"
+
+	# FreeBSD's kernel does not support QEMU assigning/grabbing
+	# host USB devices yet
+	use kernel_FreeBSD && \
+		sed -i -E -e "s|^(HOST_USB=)bsd|\1stub|" "${S}"/config-host.mak
+}
+
+src_configure() {
+	local target
+
+	python_setup
+
+	softmmu_targets= softmmu_bins=()
+	user_targets= user_bins=()
+
+	for target in ${IUSE_SOFTMMU_TARGETS} ; do
+		if use "qemu_softmmu_targets_${target}"; then
+			softmmu_targets+=",${target}-softmmu"
+			softmmu_bins+=( "qemu-system-${target}" )
+		fi
+	done
+
+	for target in ${IUSE_USER_TARGETS} ; do
+		if use "qemu_user_targets_${target}"; then
+			user_targets+=",${target}-linux-user"
+			user_bins+=( "qemu-${target}" )
+		fi
+	done
+
+	softmmu_targets=${softmmu_targets#,}
+	user_targets=${user_targets#,}
+
+	[[ -n ${softmmu_targets} ]] && qemu_src_configure "softmmu"
+	[[ -n ${user_targets}    ]] && qemu_src_configure "user"
+	[[ -z ${softmmu_targets}${user_targets} ]] && qemu_src_configure "tools"
+}
+
+src_compile() {
+	if [[ -n ${user_targets} ]]; then
+		cd "${S}/user-build"
+		default
+	fi
+
+	if [[ -n ${softmmu_targets} ]]; then
+		cd "${S}/softmmu-build"
+		default
+	fi
+
+	if [[ -z ${softmmu_targets}${user_targets} ]]; then
+		cd "${S}/tools-build"
+		default
+	fi
+}
+
+src_test() {
+	if [[ -n ${softmmu_targets} ]]; then
+		cd "${S}/softmmu-build"
+		pax-mark m */qemu-system-* #515550
+		emake -j1 check
+		emake -j1 check-report.html
+	fi
+}
+
+qemu_python_install() {
+	python_domodule "${S}/scripts/qmp/qmp.py"
+
+	python_doscript "${S}/scripts/kvm/kvm_stat"
+	python_doscript "${S}/scripts/kvm/vmxcap"
+	python_doscript "${S}/scripts/qmp/qmp-shell"
+	python_doscript "${S}/scripts/qmp/qemu-ga-client"
+}
+
+src_install() {
+	if [[ -n ${user_targets} ]]; then
+		cd "${S}/user-build"
+		emake DESTDIR="${ED}" install
+
+		# Install binfmt handler init script for user targets
+		newinitd "${FILESDIR}/qemu-binfmt.initd-r1" qemu-binfmt
+	fi
+
+	if [[ -n ${softmmu_targets} ]]; then
+		cd "${S}/softmmu-build"
+		emake DESTDIR="${ED}" install
+
+		# This might not exist if the test failed. #512010
+		[[ -e check-report.html ]] && dohtml check-report.html
+
+		if use kernel_linux; then
+			udev_dorules "${FILESDIR}"/65-kvm.rules
+		fi
+
+		if use python; then
+			python_foreach_impl qemu_python_install
+		fi
+	fi
+
+	if [[ -z ${softmmu_targets}${user_targets} ]]; then
+		cd "${S}/tools-build"
+		emake DESTDIR="${ED}" install
+	fi
+
+	# Disable mprotect on the qemu binaries as they use JITs to be fast #459348
+	pushd "${ED}"/usr/bin >/dev/null
+	pax-mark m "${softmmu_bins[@]}" "${user_bins[@]}"
+	popd >/dev/null
+
+	# Install config file example for qemu-bridge-helper
+	insinto "/etc/qemu"
+	doins "${FILESDIR}/bridge.conf"
+
+	# Remove the docdir placed qmp-commands.txt
+	mv "${ED}/usr/share/doc/${PF}/html/qmp-commands.txt" "${S}/docs/" || die
+
+	cd "${S}"
+	dodoc Changelog MAINTAINERS docs/specs/pci-ids.txt
+	newdoc pc-bios/README README.pc-bios
+	dodoc docs/qmp-*.txt
+
+	if [[ -n ${softmmu_targets} ]]; then
+		# Remove SeaBIOS since we're using the SeaBIOS packaged one
+		rm "${ED}/usr/share/qemu/bios.bin"
+		if use qemu_softmmu_targets_x86_64 || use qemu_softmmu_targets_i386; then
+			dosym ../seabios/bios.bin /usr/share/qemu/bios.bin
+		fi
+
+		# Remove vgabios since we're using the vgabios packaged one
+		rm "${ED}/usr/share/qemu/vgabios.bin"
+		rm "${ED}/usr/share/qemu/vgabios-cirrus.bin"
+		rm "${ED}/usr/share/qemu/vgabios-qxl.bin"
+		rm "${ED}/usr/share/qemu/vgabios-stdvga.bin"
+		rm "${ED}/usr/share/qemu/vgabios-vmware.bin"
+		if use qemu_softmmu_targets_x86_64 || use qemu_softmmu_targets_i386; then
+			dosym ../vgabios/vgabios.bin /usr/share/qemu/vgabios.bin
+			dosym ../vgabios/vgabios-cirrus.bin /usr/share/qemu/vgabios-cirrus.bin
+			dosym ../vgabios/vgabios-qxl.bin /usr/share/qemu/vgabios-qxl.bin
+			dosym ../vgabios/vgabios-stdvga.bin /usr/share/qemu/vgabios-stdvga.bin
+			dosym ../vgabios/vgabios-vmware.bin /usr/share/qemu/vgabios-vmware.bin
+		fi
+
+		# Remove sgabios since we're using the sgabios packaged one
+		rm "${ED}/usr/share/qemu/sgabios.bin"
+		if use qemu_softmmu_targets_x86_64 || use qemu_softmmu_targets_i386; then
+			dosym ../sgabios/sgabios.bin /usr/share/qemu/sgabios.bin
+		fi
+
+		# Remove iPXE since we're using the iPXE packaged one
+		rm "${ED}"/usr/share/qemu/pxe-*.rom
+		if use qemu_softmmu_targets_x86_64 || use qemu_softmmu_targets_i386; then
+			dosym ../ipxe/8086100e.rom /usr/share/qemu/pxe-e1000.rom
+			dosym ../ipxe/80861209.rom /usr/share/qemu/pxe-eepro100.rom
+			dosym ../ipxe/10500940.rom /usr/share/qemu/pxe-ne2k_pci.rom
+			dosym ../ipxe/10222000.rom /usr/share/qemu/pxe-pcnet.rom
+			dosym ../ipxe/10ec8139.rom /usr/share/qemu/pxe-rtl8139.rom
+			dosym ../ipxe/1af41000.rom /usr/share/qemu/pxe-virtio.rom
+		fi
+	fi
+
+	qemu_support_kvm && readme.gentoo_create_doc
+}
+
+pkg_postinst() {
+	if qemu_support_kvm; then
+		readme.gentoo_print_elog
+	fi
+
+	if [[ -n ${softmmu_targets} ]] && use kernel_linux; then
+		udev_reload
+	fi
+
+	fcaps cap_net_admin /usr/libexec/qemu-bridge-helper
+}
+
+pkg_info() {
+	echo "Using:"
+	echo "  $(best_version app-emulation/spice-protocol)"
+	echo "  $(best_version sys-firmware/ipxe)"
+	echo "  $(best_version sys-firmware/seabios)"
+	if has_version 'sys-firmware/seabios[binary]'; then
+		echo "    USE=binary"
+	else
+		echo "    USE=''"
+	fi
+	echo "  $(best_version sys-firmware/vgabios)"
+}