From: "Tim Harder" <radhermit@gentoo.org>
To: gentoo-commits@lists.gentoo.org
Subject: [gentoo-commits] repo/gentoo:master commit in: net-im/bitlbee/
Date: Mon, 18 Jan 2016 03:33:10 +0000 (UTC) [thread overview]
Message-ID: <1453087914.0cc2768a9f6683d4cdcf32571adcf860682a0d8a.radhermit@gentoo> (raw)
commit: 0cc2768a9f6683d4cdcf32571adcf860682a0d8a
Author: Tim Harder <radhermit <AT> gentoo <DOT> org>
AuthorDate: Mon Jan 18 03:31:10 2016 +0000
Commit: Tim Harder <radhermit <AT> gentoo <DOT> org>
CommitDate: Mon Jan 18 03:31:54 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=0cc2768a
net-im/bitlbee: add live ebuild
net-im/bitlbee/bitlbee-9999.ebuild | 176 +++++++++++++++++++++++++++++++++++++
1 file changed, 176 insertions(+)
diff --git a/net-im/bitlbee/bitlbee-9999.ebuild b/net-im/bitlbee/bitlbee-9999.ebuild
new file mode 100644
index 0000000..fb77fd8
--- /dev/null
+++ b/net-im/bitlbee/bitlbee-9999.ebuild
@@ -0,0 +1,176 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+PYTHON_COMPAT=( python2_7 )
+
+inherit eutils multilib user python-single-r1 systemd
+
+if [[ ${PV} == "9999" ]]; then
+ EGIT_REPO_URI="https://github.com/bitlbee/bitlbee.git"
+ inherit git-r3
+else
+ SRC_URI="http://get.bitlbee.org/src/${P}.tar.gz"
+ KEYWORDS="~amd64 ~ppc ~ppc64 ~x86 ~x86-fbsd"
+fi
+
+DESCRIPTION="irc to IM gateway that support multiple IM protocols"
+HOMEPAGE="http://www.bitlbee.org/"
+
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="debug gnutls ipv6 +xmpp libevent msn nss +oscar otr +plugins purple selinux
+ skype ssl test twitter +yahoo xinetd"
+
+COMMON_DEPEND="
+ >=dev-libs/glib-2.16
+ purple? ( net-im/pidgin )
+ libevent? ( dev-libs/libevent )
+ otr? ( >=net-libs/libotr-4 )
+ gnutls? ( net-libs/gnutls )
+ !gnutls? (
+ nss? ( dev-libs/nss )
+ !nss? ( ssl? ( dev-libs/openssl:0 ) )
+ )
+ "
+DEPEND="${COMMON_DEPEND}
+ dev-lang/python
+ virtual/pkgconfig
+ selinux? ( sec-policy/selinux-bitlbee )
+ test? ( dev-libs/check )"
+
+RDEPEND="${COMMON_DEPEND}
+ virtual/logger
+ skype? (
+ dev-python/skype4py[${PYTHON_USEDEP}]
+ net-im/skype
+ )
+ xinetd? ( sys-apps/xinetd )"
+
+REQUIRED_USE="|| ( purple xmpp msn oscar yahoo )
+ msn? ( || ( gnutls nss ssl ) )
+ xmpp? ( !nss )"
+
+pkg_setup() {
+ if use xmpp && ! use gnutls && ! use ssl ; then
+ einfo
+ elog "You have enabled support for Jabber but do not have SSL"
+ elog "support enabled. This *will* prevent bitlbee from being"
+ elog "able to connect to SSL enabled Jabber servers. If you need to"
+ elog "connect to Jabber over SSL, enable ONE of the following use"
+ elog "flags: gnutls or ssl"
+ einfo
+ fi
+
+ use skype && python-single-r1_pkg_setup
+
+ enewgroup bitlbee
+ enewuser bitlbee -1 -1 /var/lib/bitlbee bitlbee
+}
+
+src_prepare() {
+ sed -i \
+ -e "s@/usr/local/sbin/bitlbee@/usr/sbin/bitlbee@" \
+ -e "s/nobody/bitlbee/" \
+ -e "s/}/ disable = yes\n}/" \
+ doc/bitlbee.xinetd || die "sed failed in xinetd"
+
+ sed -i \
+ -e "s@mozilla-nss@nss@g" \
+ configure || die "sed failed in configure"
+
+ use skype && python_fix_shebang protocols/skype/skyped.py
+
+ [[ ${PV} != "9999" ]] && epatch "${FILESDIR}"/${PN}-3.2.1-configure.patch
+ epatch_user
+}
+
+src_configure() {
+ # setup plugins, protocol, ipv6 and debug
+ use xmpp && myconf="${myconf} --jabber=1"
+ for flag in debug ipv6 msn oscar plugins purple skype twitter yahoo ; do
+ if use ${flag} ; then
+ myconf="${myconf} --${flag}=1"
+ else
+ myconf="${myconf} --${flag}=0"
+ fi
+ done
+
+ # set otr
+ if use otr && use plugins ; then
+ myconf="${myconf} --otr=plugin"
+ else
+ if use otr ; then
+ ewarn "OTR support has been disabled automatically because it"
+ ewarn "requires the plugins USE flag."
+ fi
+ myconf="${myconf} --otr=0"
+ fi
+
+ # setup ssl use flags
+ if use gnutls ; then
+ myconf="${myconf} --ssl=gnutls"
+ einfo "Using gnutls for SSL support"
+ elif use ssl ; then
+ myconf="${myconf} --ssl=openssl"
+ einfo "Using openssl for SSL support"
+ elif use nss ; then
+ myconf="${myconf} --ssl=nss"
+ einfo "Using nss for SSL support"
+ else
+ myconf="${myconf} --ssl=bogus"
+ einfo "You will not have any encryption support enabled."
+ fi
+
+ # set event handler
+ if use libevent ; then
+ myconf="${myconf} --events=libevent"
+ else
+ myconf="${myconf} --events=glib"
+ fi
+
+ # NOTE: bitlbee's configure script is not an autotool creation,
+ # so that is why we don't use econf.
+ ./configure \
+ --prefix=/usr --datadir=/usr/share/bitlbee \
+ --etcdir=/etc/bitlbee --plugindir=/usr/$(get_libdir)/bitlbee \
+ --systemdsystemunitdir=$(systemd_get_unitdir) \
+ --doc=1 --strip=0 ${myconf} || die "econf failed"
+
+ sed -i \
+ -e "/^EFLAGS/s:=:&${LDFLAGS} :" \
+ Makefile.settings || die "sed failed"
+}
+
+src_install() {
+ emake install install-etc install-doc install-dev install-systemd DESTDIR="${D}"
+
+ keepdir /var/lib/bitlbee
+ fperms 700 /var/lib/bitlbee
+ fowners bitlbee:bitlbee /var/lib/bitlbee
+
+ dodoc doc/{AUTHORS,CHANGES,CREDITS,FAQ,README}
+
+ if use skype ; then
+ newdoc protocols/skype/NEWS NEWS-skype
+ newdoc protocols/skype/README README-skype
+ fi
+
+ if use xinetd ; then
+ insinto /etc/xinetd.d
+ newins doc/bitlbee.xinetd bitlbee
+ fi
+
+ newinitd "${FILESDIR}"/bitlbee.initd-r1 bitlbee
+ newconfd "${FILESDIR}"/bitlbee.confd-r1 bitlbee
+
+ exeinto /usr/share/bitlbee
+ doexe utils/{convert_purple.py,bitlbee-ctl.pl}
+}
+
+pkg_postinst() {
+ chown -R bitlbee:bitlbee "${ROOT}"/var/lib/bitlbee
+ [[ -d "${ROOT}"/var/run/bitlbee ]] &&
+ chown -R bitlbee:bitlbee "${ROOT}"/var/run/bitlbee
+}
next reply other threads:[~2016-01-18 3:33 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-18 3:33 Tim Harder [this message]
-- strict thread matches above, loose matches on Subject: below --
2024-02-20 9:08 [gentoo-commits] repo/gentoo:master commit in: net-im/bitlbee/ Petr Vaněk
2024-02-20 9:08 Petr Vaněk
2022-09-30 15:24 Agostino Sarubbo
2022-09-30 15:23 Agostino Sarubbo
2022-09-30 15:22 Agostino Sarubbo
2022-08-30 8:48 Jakov Smolić
2022-08-23 5:11 Sam James
2022-08-23 5:11 Sam James
2022-08-23 5:11 Sam James
2022-08-18 7:06 Joonas Niilola
2022-07-28 7:10 Sam James
2022-07-09 9:55 Sam James
2022-06-21 16:12 Jakov Smolić
2022-02-07 20:20 Arthur Zamarin
2022-02-07 20:20 Arthur Zamarin
2022-02-07 20:20 Arthur Zamarin
2021-05-02 19:40 Mikle Kolyada
2021-04-15 8:41 Joonas Niilola
2021-03-26 15:55 Sam James
2020-09-07 8:20 Sergei Trofimovich
2020-08-22 11:26 Agostino Sarubbo
2020-08-22 5:50 Agostino Sarubbo
2020-05-05 8:47 Joonas Niilola
2020-05-05 8:47 Joonas Niilola
2020-05-05 8:47 Joonas Niilola
2020-05-05 8:47 Joonas Niilola
2020-05-05 8:46 Joonas Niilola
2019-11-20 14:39 Joonas Niilola
2019-11-18 5:27 Tim Harder
2019-09-15 14:55 Michał Górny
2019-09-15 14:55 Michał Górny
2019-08-14 23:17 Tim Harder
2017-09-11 6:44 Tim Harder
2017-02-12 15:44 Agostino Sarubbo
2017-02-08 2:12 Michael Weber
2017-02-01 22:32 Tim Harder
2017-01-25 6:30 Tim Harder
2017-01-25 6:30 Tim Harder
2017-01-04 17:09 Agostino Sarubbo
2016-12-21 11:28 Tobias Klausmann
2016-08-07 6:52 Pacho Ramos
2016-07-03 23:01 Zac Medico
2016-03-27 1:26 Tim Harder
2016-03-27 1:26 Tim Harder
2016-03-16 11:51 Agostino Sarubbo
2016-03-15 15:27 Agostino Sarubbo
2016-03-06 12:58 Agostino Sarubbo
2016-01-18 3:17 Tim Harder
2016-01-17 22:20 Tim Harder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453087914.0cc2768a9f6683d4cdcf32571adcf860682a0d8a.radhermit@gentoo \
--to=radhermit@gentoo.org \
--cc=gentoo-commits@lists.gentoo.org \
--cc=gentoo-dev@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox