* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2016-01-19 8:34 Patrice Clement
0 siblings, 0 replies; 41+ messages in thread
From: Patrice Clement @ 2016-01-19 8:34 UTC (permalink / raw
To: gentoo-commits
commit: 56601a92791068ea2ae37ff172561e16f4a429b1
Author: Dongxu Li <dongxuli2011 <AT> gmail <DOT> com>
AuthorDate: Sun Jan 17 06:40:53 2016 +0000
Commit: Patrice Clement <monsieurp <AT> gentoo <DOT> org>
CommitDate: Sun Jan 17 06:40:53 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=56601a92
media-gfx/librecad: depends slots
media-gfx/librecad/librecad-2.0.9.ebuild | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/media-gfx/librecad/librecad-2.0.9.ebuild b/media-gfx/librecad/librecad-2.0.9.ebuild
index fb31be3..587b962 100644
--- a/media-gfx/librecad/librecad-2.0.9.ebuild
+++ b/media-gfx/librecad/librecad-2.0.9.ebuild
@@ -33,9 +33,9 @@ DEPEND="
dev-qt/qtwidgets:5
dev-qt/qtxml:5
)
- dev-libs/boost
+ dev-libs/boost:=
dev-cpp/muParser
- media-libs/freetype"
+ media-libs/freetype:2"
RDEPEND="${DEPEND}"
S="${WORKDIR}/LibreCAD-${PV}"
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2024-10-25 7:31 Yixun Lan
0 siblings, 0 replies; 41+ messages in thread
From: Yixun Lan @ 2024-10-25 7:31 UTC (permalink / raw
To: gentoo-commits
commit: d36b70be34b0bd336734053ecad605a9723f6da3
Author: Alexander Golubev <fatzer2 <AT> gmail <DOT> com>
AuthorDate: Mon Oct 21 23:08:38 2024 +0000
Commit: Yixun Lan <dlan <AT> gentoo <DOT> org>
CommitDate: Fri Oct 25 07:31:37 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d36b70be
media-gfx/librecad: update live
- Migrate to Qt6
- update PLOCALES
Closes: https://github.com/gentoo/gentoo/pull/39103
Signed-off-by: Alexander Golubev <fatzer2 <AT> gmail.com>
Signed-off-by: Yixun Lan <dlan <AT> gentoo.org>
media-gfx/librecad/librecad-9999.ebuild | 21 +++++++++------------
1 file changed, 9 insertions(+), 12 deletions(-)
diff --git a/media-gfx/librecad/librecad-9999.ebuild b/media-gfx/librecad/librecad-9999.ebuild
index dd55eaef5195..a647eb2a96ff 100644
--- a/media-gfx/librecad/librecad-9999.ebuild
+++ b/media-gfx/librecad/librecad-9999.ebuild
@@ -1,8 +1,8 @@
-# Copyright 1999-2022 Gentoo Authors
+# Copyright 1999-2024 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=8
-PLOCALES="ar ca cs da de el en en_au es es_ar es_bo es_cl es_co es_cr es_do es_ec es_gt es_hn es_mx es_ni es_pa es_pe es_pr es_py es_sv es_us es_uy es_ve et eu fi fr gl hi hu id_ID it ja ko lv mk nl no pa pl pt_br pt_pt ro_ro ru sk sl sq_al sv ta tr uk zh_cn zh_tw"
+PLOCALES="ar ca cs da de el en en_au es es_ar es_bo es_cl es_co es_cr es_do es_ec es_gt es_hn es_mx es_ni es_pa es_pe es_pr es_py es_sv es_us es_uy es_ve et eu fi fr gl he hi hu id_ID it ja ka ko lv mk nl no pa pl pt_br pt_pt ro_ro ru sk sl sq_al sr sv ta th tr uk zh_cn zh_tw"
inherit desktop edo plocale qmake-utils
@@ -25,19 +25,16 @@ IUSE="debug doc tools"
RDEPEND="
dev-cpp/muParser
dev-libs/boost:=
- dev-qt/qtcore:5
- dev-qt/qtgui:5
- dev-qt/qtprintsupport:5
- dev-qt/qtsvg:5
- dev-qt/qtwidgets:5
+ dev-qt/qtbase:6[gui,widgets]
+ dev-qt/qtsvg:6
media-libs/freetype:2
"
DEPEND="${RDEPEND}
- dev-qt/qthelp:5
- dev-qt/qtxml:5
+ dev-qt/qtbase:6[xml]
+ dev-qt/qttools:6[assistant]
"
BDEPEND="
- dev-qt/linguist-tools:5
+ dev-qt/qttools:6[linguist]
"
src_prepare() {
@@ -52,14 +49,14 @@ src_prepare() {
}
src_configure() {
- eqmake5 -r
+ eqmake6 -r
}
src_compile() {
default
build_locale() {
- local lrelease="$(qt5_get_bindir)/lrelease"
+ local lrelease="$(qt6_get_bindir)/lrelease"
edo "${lrelease}" "librecad/ts/librecad_${1}.ts" \
-qm "unix/resources/qm/librecad_${1}.qm"
edo "${lrelease}" "plugins/ts/plugins_${1}.ts" \
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2024-09-22 7:20 Sam James
0 siblings, 0 replies; 41+ messages in thread
From: Sam James @ 2024-09-22 7:20 UTC (permalink / raw
To: gentoo-commits
commit: d5108d510bab8de832b4173a1ca035f409173a3f
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Sep 22 07:19:29 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Sep 22 07:19:29 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d5108d51
media-gfx/librecad: Stabilize 2.2.0.2 x86, #940018
Signed-off-by: Sam James <sam <AT> gentoo.org>
media-gfx/librecad/librecad-2.2.0.2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/librecad/librecad-2.2.0.2.ebuild b/media-gfx/librecad/librecad-2.2.0.2.ebuild
index ae52d8e7935d..ff44cb2fa0b0 100644
--- a/media-gfx/librecad/librecad-2.2.0.2.ebuild
+++ b/media-gfx/librecad/librecad-2.2.0.2.ebuild
@@ -15,7 +15,7 @@ if [[ ${PV} == *9999* ]]; then
else
SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.tar.gz -> ${P}.tar.gz"
S="${WORKDIR}/LibreCAD-${PV}"
- KEYWORDS="amd64 ~ppc64 ~riscv ~x86 ~amd64-linux ~x86-linux"
+ KEYWORDS="amd64 ~ppc64 ~riscv x86 ~amd64-linux ~x86-linux"
fi
LICENSE="GPL-2"
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2024-09-22 7:20 Sam James
0 siblings, 0 replies; 41+ messages in thread
From: Sam James @ 2024-09-22 7:20 UTC (permalink / raw
To: gentoo-commits
commit: 14d79af54935fb71cca3917ad9aec927dea744a5
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Sun Sep 22 07:19:28 2024 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Sun Sep 22 07:19:28 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=14d79af5
media-gfx/librecad: Stabilize 2.2.0.2 amd64, #940018
Signed-off-by: Sam James <sam <AT> gentoo.org>
media-gfx/librecad/librecad-2.2.0.2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/librecad/librecad-2.2.0.2.ebuild b/media-gfx/librecad/librecad-2.2.0.2.ebuild
index 6da50e9fe6f7..ae52d8e7935d 100644
--- a/media-gfx/librecad/librecad-2.2.0.2.ebuild
+++ b/media-gfx/librecad/librecad-2.2.0.2.ebuild
@@ -15,7 +15,7 @@ if [[ ${PV} == *9999* ]]; then
else
SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.tar.gz -> ${P}.tar.gz"
S="${WORKDIR}/LibreCAD-${PV}"
- KEYWORDS="~amd64 ~ppc64 ~riscv ~x86 ~amd64-linux ~x86-linux"
+ KEYWORDS="amd64 ~ppc64 ~riscv ~x86 ~amd64-linux ~x86-linux"
fi
LICENSE="GPL-2"
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2024-06-30 0:00 Conrad Kostecki
0 siblings, 0 replies; 41+ messages in thread
From: Conrad Kostecki @ 2024-06-30 0:00 UTC (permalink / raw
To: gentoo-commits
commit: d119747e183865a1ec18c1f851a422b489fb421a
Author: Michael Mair-Keimberger <mmk <AT> levelnine <DOT> at>
AuthorDate: Sat Jun 29 10:32:23 2024 +0000
Commit: Conrad Kostecki <conikost <AT> gentoo <DOT> org>
CommitDate: Sat Jun 29 23:54:56 2024 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d119747e
media-gfx/librecad: add 2.2.0.2
Signed-off-by: Michael Mair-Keimberger <mmk <AT> levelnine.at>
Bug: https://bugs.gentoo.org/918609
Closes: https://github.com/gentoo/gentoo/pull/37352
Signed-off-by: Conrad Kostecki <conikost <AT> gentoo.org>
media-gfx/librecad/Manifest | 1 +
media-gfx/librecad/librecad-2.2.0.2.ebuild | 85 ++++++++++++++++++++++++++++++
2 files changed, 86 insertions(+)
diff --git a/media-gfx/librecad/Manifest b/media-gfx/librecad/Manifest
index 293932e7bd13..a19d2a8beb34 100644
--- a/media-gfx/librecad/Manifest
+++ b/media-gfx/librecad/Manifest
@@ -1,3 +1,4 @@
DIST librecad-2.1.3.tar.gz 22415288 BLAKE2B fb920113a7e4b2e9e7e3425f77364c36f6be676a3cd109798786b06d31698fd11437bc7f50cb843ca02d761730e83db7fde475d1bce6a65336a845b5b0114918 SHA512 246cffcc1ea3389997b4a738ab5e3d78e8c1096817ecb1ca28f38d601bc5d1a95f60798ac82308914a34da7b5dbc302b8363cf8b58a97221fdc8ee63010adc6c
+DIST librecad-2.2.0.2.tar.gz 13645528 BLAKE2B 43a9ada4d6fe8c0cb96dc1003a9e7aa3b4d21619ce9776de1e6d273dd884f2313f9e90abed9cadcd44aaac2131bb62ffb0105bc0d8a097513ac42b9886107021 SHA512 054c6e6cf35a30099e71dd022574864c42d99db8bfa73b544113573723f8e6db2c92f9b7a827b947528f8ad9c743bca73a77a81bc50a9dc66f290480bb38db05
DIST librecad-2.2.0.tar.gz 13837301 BLAKE2B ede9181b6805455d10773b70a8262ffb5a1c48f353dbfd1b80f705ba3194be700e9a486cdf528c4e8015b327a75a29c81b832186024d48229a6cc5fd9ca2dc12 SHA512 df33eac311b5232d6fc0480be1b1c9d257a33ba22f9b7897af4c1761978c87c07a962ae3ea37e8728661a788152157fc621aae65d60d44ae37b2028919cc96a2
DIST librecad-gentoo-CVE-patches-2.1.3.tar.gz 11687 BLAKE2B 4676fa60033e6d0ace35bbebfae569366a50ec46c2dc5b90bace9564e1f6c2020f733f63981788b6f5288fb0c57760215e7b35f294656c21787ebdefa8447fa0 SHA512 b485b41ab1d6eb61750c11a9b327fc70d28cd0cf689b3cd815b4982d3d800737f402522d9c3d416f1e43422166e7de4f97055de238cc2fe80cc45f11fa3377e6
diff --git a/media-gfx/librecad/librecad-2.2.0.2.ebuild b/media-gfx/librecad/librecad-2.2.0.2.ebuild
new file mode 100644
index 000000000000..6da50e9fe6f7
--- /dev/null
+++ b/media-gfx/librecad/librecad-2.2.0.2.ebuild
@@ -0,0 +1,85 @@
+# Copyright 1999-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+PLOCALES="ar ca cs da de el en en_au es es_ar es_bo es_cl es_co es_cr es_do es_ec es_gt es_hn es_mx es_ni es_pa es_pe es_pr es_py es_sv es_us es_uy es_ve et eu fi fr gl hi hu id_ID it ja ko lv mk nl no pa pl pt_br pt_pt ro_ro ru sk sl sq_al sv ta tr uk zh_cn zh_tw"
+
+inherit desktop edo plocale qmake-utils
+
+DESCRIPTION="Generic 2D CAD program"
+HOMEPAGE="https://www.librecad.org/"
+
+if [[ ${PV} == *9999* ]]; then
+ EGIT_REPO_URI="https://github.com/LibreCAD/LibreCAD.git"
+ inherit git-r3
+else
+ SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.tar.gz -> ${P}.tar.gz"
+ S="${WORKDIR}/LibreCAD-${PV}"
+ KEYWORDS="~amd64 ~ppc64 ~riscv ~x86 ~amd64-linux ~x86-linux"
+fi
+
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="debug doc tools"
+
+RDEPEND="
+ dev-cpp/muParser
+ dev-libs/boost:=
+ dev-qt/qtcore:5
+ dev-qt/qtgui:5
+ dev-qt/qtprintsupport:5
+ dev-qt/qtsvg:5
+ dev-qt/qtwidgets:5
+ media-libs/freetype:2
+"
+DEPEND="${RDEPEND}
+ dev-qt/qthelp:5
+ dev-qt/qtxml:5
+"
+BDEPEND="
+ dev-qt/linguist-tools:5
+"
+
+src_prepare() {
+ default
+
+ # Stock script doesn't work correctly on gentoo (see bug #847394)
+ # and also it compiles all translations regardles of selected locales.
+ # To avoid this just comment out locale building and do it manually
+ sed -i -e '/LRELEASE/s!^!# !' scripts/postprocess-unix.sh || die
+
+ plocale_find_changes 'librecad/ts' 'librecad_' '.ts'
+}
+
+src_configure() {
+ eqmake5 -r
+}
+
+src_compile() {
+ default
+
+ build_locale() {
+ local lrelease="$(qt5_get_bindir)/lrelease"
+ edo "${lrelease}" "librecad/ts/librecad_${1}.ts" \
+ -qm "unix/resources/qm/librecad_${1}.qm"
+ edo "${lrelease}" "plugins/ts/plugins_${1}.ts" \
+ -qm "unix/resources/qm/plugins_${1}.qm"
+ }
+
+ plocale_for_each_locale build_locale
+ # We want the en locale to be always present. Otherwise it could
+ # be impossible to select the English command set which is quite crucial.
+ has en $(plocale_get_locales) || build_locale en
+}
+
+src_install() {
+ dobin unix/librecad
+ use tools && dobin unix/ttf2lff
+ insinto /usr/share/${PN}
+ doins -r unix/resources/*
+ use doc && docinto html && dodoc -r librecad/support/doc/*
+ insinto /usr/share/metainfo
+ doins unix/appdata/org.librecad.librecad.appdata.xml
+ doicon librecad/res/main/${PN}.png
+ make_desktop_entry ${PN} LibreCAD ${PN} Graphics
+}
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2023-03-17 18:26 Sam James
0 siblings, 0 replies; 41+ messages in thread
From: Sam James @ 2023-03-17 18:26 UTC (permalink / raw
To: gentoo-commits
commit: 249d97d258bf1d7a95b4dc9b07c1893485f69bc5
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Mar 17 18:26:23 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Mar 17 18:26:23 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=249d97d2
media-gfx/librecad: Stabilize 2.2.0 amd64, #901897
Signed-off-by: Sam James <sam <AT> gentoo.org>
media-gfx/librecad/librecad-2.2.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/librecad/librecad-2.2.0.ebuild b/media-gfx/librecad/librecad-2.2.0.ebuild
index c88fba56a795..092799ec110b 100644
--- a/media-gfx/librecad/librecad-2.2.0.ebuild
+++ b/media-gfx/librecad/librecad-2.2.0.ebuild
@@ -15,7 +15,7 @@ if [[ ${PV} == *9999* ]]; then
else
SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.tar.gz -> ${P}.tar.gz"
S="${WORKDIR}/LibreCAD-${PV}"
- KEYWORDS="~amd64 ~ppc64 ~riscv x86 ~amd64-linux ~x86-linux"
+ KEYWORDS="amd64 ~ppc64 ~riscv x86 ~amd64-linux ~x86-linux"
fi
LICENSE="GPL-2"
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2023-03-17 17:22 Sam James
0 siblings, 0 replies; 41+ messages in thread
From: Sam James @ 2023-03-17 17:22 UTC (permalink / raw
To: gentoo-commits
commit: 98d00c34225572aab181d37341ba67fac6568971
Author: Sam James <sam <AT> gentoo <DOT> org>
AuthorDate: Fri Mar 17 17:21:35 2023 +0000
Commit: Sam James <sam <AT> gentoo <DOT> org>
CommitDate: Fri Mar 17 17:21:35 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=98d00c34
media-gfx/librecad: Stabilize 2.2.0 x86, #901897
Signed-off-by: Sam James <sam <AT> gentoo.org>
media-gfx/librecad/librecad-2.2.0.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/librecad/librecad-2.2.0.ebuild b/media-gfx/librecad/librecad-2.2.0.ebuild
index 6764913d807a..c88fba56a795 100644
--- a/media-gfx/librecad/librecad-2.2.0.ebuild
+++ b/media-gfx/librecad/librecad-2.2.0.ebuild
@@ -15,7 +15,7 @@ if [[ ${PV} == *9999* ]]; then
else
SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.tar.gz -> ${P}.tar.gz"
S="${WORKDIR}/LibreCAD-${PV}"
- KEYWORDS="~amd64 ~ppc64 ~riscv ~x86 ~amd64-linux ~x86-linux"
+ KEYWORDS="~amd64 ~ppc64 ~riscv x86 ~amd64-linux ~x86-linux"
fi
LICENSE="GPL-2"
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2023-02-05 9:13 Joonas Niilola
0 siblings, 0 replies; 41+ messages in thread
From: Joonas Niilola @ 2023-02-05 9:13 UTC (permalink / raw
To: gentoo-commits
commit: 12765a7445225ad3acaeb6f3683c8f25ed4e18ca
Author: Alexander Golubev <fatzer2 <AT> gmail <DOT> com>
AuthorDate: Tue Jan 24 00:35:58 2023 +0000
Commit: Joonas Niilola <juippis <AT> gentoo <DOT> org>
CommitDate: Sun Feb 5 09:12:52 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=12765a74
media-gfx/librecad: add 2.2.0
Closes: https://bugs.gentoo.org/887977
Signed-off-by: Alexander Golubev <fatzer2 <AT> gmail.com>
Closes: https://github.com/gentoo/gentoo/pull/29234
Signed-off-by: Joonas Niilola <juippis <AT> gentoo.org>
media-gfx/librecad/Manifest | 1 +
media-gfx/librecad/librecad-2.2.0.ebuild | 85 ++++++++++++++++++++++++++++++++
2 files changed, 86 insertions(+)
diff --git a/media-gfx/librecad/Manifest b/media-gfx/librecad/Manifest
index 2a3edced4862..293932e7bd13 100644
--- a/media-gfx/librecad/Manifest
+++ b/media-gfx/librecad/Manifest
@@ -1,2 +1,3 @@
DIST librecad-2.1.3.tar.gz 22415288 BLAKE2B fb920113a7e4b2e9e7e3425f77364c36f6be676a3cd109798786b06d31698fd11437bc7f50cb843ca02d761730e83db7fde475d1bce6a65336a845b5b0114918 SHA512 246cffcc1ea3389997b4a738ab5e3d78e8c1096817ecb1ca28f38d601bc5d1a95f60798ac82308914a34da7b5dbc302b8363cf8b58a97221fdc8ee63010adc6c
+DIST librecad-2.2.0.tar.gz 13837301 BLAKE2B ede9181b6805455d10773b70a8262ffb5a1c48f353dbfd1b80f705ba3194be700e9a486cdf528c4e8015b327a75a29c81b832186024d48229a6cc5fd9ca2dc12 SHA512 df33eac311b5232d6fc0480be1b1c9d257a33ba22f9b7897af4c1761978c87c07a962ae3ea37e8728661a788152157fc621aae65d60d44ae37b2028919cc96a2
DIST librecad-gentoo-CVE-patches-2.1.3.tar.gz 11687 BLAKE2B 4676fa60033e6d0ace35bbebfae569366a50ec46c2dc5b90bace9564e1f6c2020f733f63981788b6f5288fb0c57760215e7b35f294656c21787ebdefa8447fa0 SHA512 b485b41ab1d6eb61750c11a9b327fc70d28cd0cf689b3cd815b4982d3d800737f402522d9c3d416f1e43422166e7de4f97055de238cc2fe80cc45f11fa3377e6
diff --git a/media-gfx/librecad/librecad-2.2.0.ebuild b/media-gfx/librecad/librecad-2.2.0.ebuild
new file mode 100644
index 000000000000..6764913d807a
--- /dev/null
+++ b/media-gfx/librecad/librecad-2.2.0.ebuild
@@ -0,0 +1,85 @@
+# Copyright 1999-2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+PLOCALES="ar ca cs da de el en en_au es es_ar es_bo es_cl es_co es_cr es_do es_ec es_gt es_hn es_mx es_ni es_pa es_pe es_pr es_py es_sv es_us es_uy es_ve et eu fi fr gl hi hu id_ID it ja ko lv mk nl no pa pl pt_br pt_pt ro_ro ru sk sl sq_al sv ta tr uk zh_cn zh_tw"
+
+inherit desktop edo plocale qmake-utils
+
+DESCRIPTION="Generic 2D CAD program"
+HOMEPAGE="https://www.librecad.org/"
+
+if [[ ${PV} == *9999* ]]; then
+ EGIT_REPO_URI="https://github.com/LibreCAD/LibreCAD.git"
+ inherit git-r3
+else
+ SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.tar.gz -> ${P}.tar.gz"
+ S="${WORKDIR}/LibreCAD-${PV}"
+ KEYWORDS="~amd64 ~ppc64 ~riscv ~x86 ~amd64-linux ~x86-linux"
+fi
+
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="debug doc tools"
+
+RDEPEND="
+ dev-cpp/muParser
+ dev-libs/boost:=
+ dev-qt/qtcore:5
+ dev-qt/qtgui:5
+ dev-qt/qtprintsupport:5
+ dev-qt/qtsvg:5
+ dev-qt/qtwidgets:5
+ media-libs/freetype:2
+"
+DEPEND="${RDEPEND}
+ dev-qt/qthelp:5
+ dev-qt/qtxml:5
+"
+BDEPEND="
+ dev-qt/linguist-tools:5
+"
+
+src_prepare() {
+ default
+
+ # Stock script doesn't work correctly on gentoo (see bug #847394)
+ # and also it compiles all translations regardles of selected locales.
+ # To avoid this just comment out locale building and do it manually
+ sed -i -e '/LRELEASE/s!^!# !' scripts/postprocess-unix.sh || die
+
+ plocale_find_changes 'librecad/ts' 'librecad_' '.ts'
+}
+
+src_configure() {
+ eqmake5 -r
+}
+
+src_compile() {
+ default
+
+ build_locale() {
+ local lrelease="$(qt5_get_bindir)/lrelease"
+ edo "${lrelease}" "librecad/ts/librecad_${1}.ts" \
+ -qm "unix/resources/qm/librecad_${1}.qm"
+ edo "${lrelease}" "plugins/ts/plugins_${1}.ts" \
+ -qm "unix/resources/qm/plugins_${1}.qm"
+ }
+
+ plocale_for_each_locale build_locale
+ # We want the en locale to be always present. Otherwise it could
+ # be impossible to select the English command set which is quite crucial.
+ has en $(plocale_get_locales) || build_locale en
+}
+
+src_install() {
+ dobin unix/librecad
+ use tools && dobin unix/ttf2lff
+ insinto /usr/share/${PN}
+ doins -r unix/resources/*
+ use doc && docinto html && dodoc -r librecad/support/doc/*
+ insinto /usr/share/metainfo
+ doins unix/appdata/org.librecad.librecad.appdata.xml
+ doicon librecad/res/main/${PN}.png
+ make_desktop_entry ${PN} LibreCAD ${PN} Graphics
+}
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2023-01-25 4:29 John Helmert III
0 siblings, 0 replies; 41+ messages in thread
From: John Helmert III @ 2023-01-25 4:29 UTC (permalink / raw
To: gentoo-commits
commit: 4d28e84965281e2132f116892a7ea278ba5206c6
Author: John Helmert III <ajak <AT> gentoo <DOT> org>
AuthorDate: Wed Jan 25 04:27:09 2023 +0000
Commit: John Helmert III <ajak <AT> gentoo <DOT> org>
CommitDate: Wed Jan 25 04:27:09 2023 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=4d28e849
media-gfx/librecad: drop 2.1.3-r6
Bug: https://bugs.gentoo.org/825362
Bug: https://bugs.gentoo.org/832210
Signed-off-by: John Helmert III <ajak <AT> gentoo.org>
media-gfx/librecad/librecad-2.1.3-r6.ebuild | 58 -----------------------------
1 file changed, 58 deletions(-)
diff --git a/media-gfx/librecad/librecad-2.1.3-r6.ebuild b/media-gfx/librecad/librecad-2.1.3-r6.ebuild
deleted file mode 100644
index f068df1cafc4..000000000000
--- a/media-gfx/librecad/librecad-2.1.3-r6.ebuild
+++ /dev/null
@@ -1,58 +0,0 @@
-# Copyright 1999-2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-inherit desktop qmake-utils
-
-DESCRIPTION="Generic 2D CAD program"
-HOMEPAGE="https://www.librecad.org/"
-SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.tar.gz -> ${P}.tar.gz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ~ppc64 ~riscv x86 ~amd64-linux ~x86-linux"
-IUSE="debug doc tools"
-
-RDEPEND="
- dev-cpp/muParser
- dev-libs/boost:=
- dev-qt/qtcore:5
- dev-qt/qtgui:5
- dev-qt/qtprintsupport:5
- dev-qt/qtsvg:5
- dev-qt/qtwidgets:5
- media-libs/freetype:2
-"
-DEPEND="${RDEPEND}
- dev-qt/qthelp:5
- dev-qt/qtxml:5
-"
-BDEPEND="
- dev-qt/linguist-tools:5
-"
-
-S="${WORKDIR}/LibreCAD-${PV}"
-
-PATCHES=(
- "${FILESDIR}/${P}-qt-5.11.patch"
- "${FILESDIR}/${P}-gcc-9.patch"
- "${FILESDIR}/${P}-qt-5.15.patch"
- "${FILESDIR}/${P}-boost-1.76.patch" # bug 788706, upstream PR#1345
-)
-
-src_configure() {
- eqmake5 -r
-}
-
-src_install() {
- dobin unix/librecad
- use tools && dobin unix/ttf2lff
- insinto /usr/share/${PN}
- doins -r unix/resources/*
- use doc && docinto html && dodoc -r librecad/support/doc/*
- insinto /usr/share/metainfo
- doins unix/appdata/librecad.appdata.xml
- doicon librecad/res/main/${PN}.png
- make_desktop_entry ${PN} LibreCAD ${PN} Graphics
-}
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2022-11-28 7:05 Joonas Niilola
0 siblings, 0 replies; 41+ messages in thread
From: Joonas Niilola @ 2022-11-28 7:05 UTC (permalink / raw
To: gentoo-commits
commit: ae3b58318840afcd6c3dfa9d8b9310c68136527f
Author: Alexander Golubev <fatzer2 <AT> gmail <DOT> com>
AuthorDate: Mon Nov 7 08:11:20 2022 +0000
Commit: Joonas Niilola <juippis <AT> gentoo <DOT> org>
CommitDate: Mon Nov 28 07:05:29 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ae3b5831
media-gfx/librecad: several improvements
* bump to EAPI=8
* fix tranlation install
* fix live ebuild installation
* patch several CVEs
Bug: https://bugs.gentoo.org/847394
Bug: https://bugs.gentoo.org/852941
Bug: https://bugs.gentoo.org/825362
Bug: https://bugs.gentoo.org/832210
Closes: https://bugs.gentoo.org/878925
Signed-off-by: Alexander Golubev <fatzer2 <AT> gmail.com>
Closes: https://github.com/gentoo/gentoo/pull/28164
Signed-off-by: Joonas Niilola <juippis <AT> gentoo.org>
media-gfx/librecad/Manifest | 1 +
media-gfx/librecad/librecad-2.1.3-r7.ebuild | 99 +++++++++++++++++++++++++++++
media-gfx/librecad/librecad-9999.ebuild | 37 +++++++++--
3 files changed, 133 insertions(+), 4 deletions(-)
diff --git a/media-gfx/librecad/Manifest b/media-gfx/librecad/Manifest
index fcff5ba5ec8f..2a3edced4862 100644
--- a/media-gfx/librecad/Manifest
+++ b/media-gfx/librecad/Manifest
@@ -1 +1,2 @@
DIST librecad-2.1.3.tar.gz 22415288 BLAKE2B fb920113a7e4b2e9e7e3425f77364c36f6be676a3cd109798786b06d31698fd11437bc7f50cb843ca02d761730e83db7fde475d1bce6a65336a845b5b0114918 SHA512 246cffcc1ea3389997b4a738ab5e3d78e8c1096817ecb1ca28f38d601bc5d1a95f60798ac82308914a34da7b5dbc302b8363cf8b58a97221fdc8ee63010adc6c
+DIST librecad-gentoo-CVE-patches-2.1.3.tar.gz 11687 BLAKE2B 4676fa60033e6d0ace35bbebfae569366a50ec46c2dc5b90bace9564e1f6c2020f733f63981788b6f5288fb0c57760215e7b35f294656c21787ebdefa8447fa0 SHA512 b485b41ab1d6eb61750c11a9b327fc70d28cd0cf689b3cd815b4982d3d800737f402522d9c3d416f1e43422166e7de4f97055de238cc2fe80cc45f11fa3377e6
diff --git a/media-gfx/librecad/librecad-2.1.3-r7.ebuild b/media-gfx/librecad/librecad-2.1.3-r7.ebuild
new file mode 100644
index 000000000000..3f3a914a5304
--- /dev/null
+++ b/media-gfx/librecad/librecad-2.1.3-r7.ebuild
@@ -0,0 +1,99 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+PLOCALES="ar ca cs da de el en en_au es es_ar es_bo es_cl es_co es_cr es_do es_ec es_gt es_hn es_mx es_ni es_pa es_pe es_pr es_py es_sv es_us es_uy es_ve et eu fi fr gl hi hu id_ID it ja ko lv nl no pa pl pt_br pt_pt ro_ro ru sk sl sq_al sv ta tr uk zh_cn zh_tw"
+
+inherit desktop edo plocale qmake-utils
+
+DESCRIPTION="Generic 2D CAD program"
+HOMEPAGE="https://www.librecad.org/"
+
+if [[ ${PV} == *9999* ]]; then
+ EGIT_REPO_URI="https://github.com/LibreCAD/LibreCAD.git"
+ inherit git-r3
+else
+ SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.tar.gz -> ${P}.tar.gz
+ https://github.com/Fat-Zer/librecad-gentoo-CVE-patches/archive/v${PV/_/}.tar.gz -> librecad-gentoo-CVE-patches-${PV}.tar.gz
+ "
+ S="${WORKDIR}/LibreCAD-${PV}"
+ KEYWORDS="~amd64 ~ppc64 ~riscv ~x86 ~amd64-linux ~x86-linux"
+fi
+
+LICENSE="GPL-2"
+SLOT="0"
+IUSE="debug doc tools"
+
+RDEPEND="
+ dev-cpp/muParser
+ dev-libs/boost:=
+ dev-qt/qtcore:5
+ dev-qt/qtgui:5
+ dev-qt/qtprintsupport:5
+ dev-qt/qtsvg:5
+ dev-qt/qtwidgets:5
+ media-libs/freetype:2
+"
+DEPEND="${RDEPEND}
+ dev-qt/qthelp:5
+ dev-qt/qtxml:5
+"
+BDEPEND="
+ dev-qt/linguist-tools:5
+"
+
+PATCHES=(
+ "${FILESDIR}/${P}-qt-5.11.patch"
+ "${FILESDIR}/${P}-gcc-9.patch"
+ "${FILESDIR}/${P}-qt-5.15.patch"
+ "${FILESDIR}/${P}-boost-1.76.patch" # bug 788706, upstream PR#1345
+)
+
+src_prepare() {
+ default
+
+ # Note: the CVE patches are borrowed from debian packaging; some of the
+ # patches are too big for the tree; move them to a separate repo/
+ # see bug #825362 and bug #832210
+ eapply "${WORKDIR}/librecad-gentoo-CVE-patches-${PV}"
+
+ # Stock script doesn't work correctly on gentoo (see bug #847394)
+ # and also it compiles all translations regardles of selected locales.
+ # To avoid this just comment out locale building and do it manually
+ sed -i -e '/LRELEASE/s!^!# !' scripts/postprocess-unix.sh || die
+
+ plocale_find_changes 'librecad/ts' 'librecad_' '.ts'
+}
+
+src_configure() {
+ eqmake5 -r
+}
+
+src_compile() {
+ default
+
+ build_locale() {
+ local lrelease="$(qt5_get_bindir)/lrelease"
+ edo "${lrelease}" "librecad/ts/librecad_${1}.ts" \
+ -qm "unix/resources/qm/librecad_${1}.qm"
+ edo "${lrelease}" "plugins/ts/plugins_${1}.ts" \
+ -qm "unix/resources/qm/plugins_${1}.qm"
+ }
+
+ plocale_for_each_locale build_locale
+ # We want the en locale to be always present. Otherwise it could
+ # be impossible to select the English command set which is quite crucial.
+ has en $(plocale_get_locales) || build_locale en
+}
+
+src_install() {
+ dobin unix/librecad
+ use tools && dobin unix/ttf2lff
+ insinto /usr/share/${PN}
+ doins -r unix/resources/*
+ use doc && docinto html && dodoc -r librecad/support/doc/*
+ insinto /usr/share/metainfo
+ doins unix/appdata/librecad.appdata.xml
+ doicon librecad/res/main/${PN}.png
+ make_desktop_entry ${PN} LibreCAD ${PN} Graphics
+}
diff --git a/media-gfx/librecad/librecad-9999.ebuild b/media-gfx/librecad/librecad-9999.ebuild
index 445cd8eabb8a..dd55eaef5195 100644
--- a/media-gfx/librecad/librecad-9999.ebuild
+++ b/media-gfx/librecad/librecad-9999.ebuild
@@ -1,9 +1,10 @@
-# Copyright 1999-2021 Gentoo Authors
+# Copyright 1999-2022 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
-EAPI=7
+EAPI=8
+PLOCALES="ar ca cs da de el en en_au es es_ar es_bo es_cl es_co es_cr es_do es_ec es_gt es_hn es_mx es_ni es_pa es_pe es_pr es_py es_sv es_us es_uy es_ve et eu fi fr gl hi hu id_ID it ja ko lv mk nl no pa pl pt_br pt_pt ro_ro ru sk sl sq_al sv ta tr uk zh_cn zh_tw"
-inherit desktop qmake-utils
+inherit desktop edo plocale qmake-utils
DESCRIPTION="Generic 2D CAD program"
HOMEPAGE="https://www.librecad.org/"
@@ -39,10 +40,38 @@ BDEPEND="
dev-qt/linguist-tools:5
"
+src_prepare() {
+ default
+
+ # Stock script doesn't work correctly on gentoo (see bug #847394)
+ # and also it compiles all translations regardles of selected locales.
+ # To avoid this just comment out locale building and do it manually
+ sed -i -e '/LRELEASE/s!^!# !' scripts/postprocess-unix.sh || die
+
+ plocale_find_changes 'librecad/ts' 'librecad_' '.ts'
+}
+
src_configure() {
eqmake5 -r
}
+src_compile() {
+ default
+
+ build_locale() {
+ local lrelease="$(qt5_get_bindir)/lrelease"
+ edo "${lrelease}" "librecad/ts/librecad_${1}.ts" \
+ -qm "unix/resources/qm/librecad_${1}.qm"
+ edo "${lrelease}" "plugins/ts/plugins_${1}.ts" \
+ -qm "unix/resources/qm/plugins_${1}.qm"
+ }
+
+ plocale_for_each_locale build_locale
+ # We want the en locale to be always present. Otherwise it could
+ # be impossible to select the English command set which is quite crucial.
+ has en $(plocale_get_locales) || build_locale en
+}
+
src_install() {
dobin unix/librecad
use tools && dobin unix/ttf2lff
@@ -50,7 +79,7 @@ src_install() {
doins -r unix/resources/*
use doc && docinto html && dodoc -r librecad/support/doc/*
insinto /usr/share/metainfo
- doins unix/appdata/librecad.appdata.xml
+ doins unix/appdata/org.librecad.librecad.appdata.xml
doicon librecad/res/main/${PN}.png
make_desktop_entry ${PN} LibreCAD ${PN} Graphics
}
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2022-01-22 8:41 Yixun Lan
0 siblings, 0 replies; 41+ messages in thread
From: Yixun Lan @ 2022-01-22 8:41 UTC (permalink / raw
To: gentoo-commits
commit: abc195f85e1771cb4a78bf52a0861a7e92649605
Author: Jer Sun <sjj991212 <AT> gmail <DOT> com>
AuthorDate: Fri Jan 21 03:26:28 2022 +0000
Commit: Yixun Lan <dlan <AT> gentoo <DOT> org>
CommitDate: Sat Jan 22 08:37:58 2022 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=abc195f8
media-gfx/librecad: keyword ~riscv
Tested librecad on unmatched hardware.
Closes: https://bugs.gentoo.org/831661
Closes: https://github.com/gentoo/gentoo/pull/23892
Package-Manager: Portage-3.0.28, Repoman-3.0.3
Signed-off-by: Jer Sun <sjj991212 <AT> gmail.com>
Signed-off-by: Yixun Lan <dlan <AT> gentoo.org>
media-gfx/librecad/librecad-2.1.3-r6.ebuild | 4 ++--
media-gfx/librecad/librecad-9999.ebuild | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/media-gfx/librecad/librecad-2.1.3-r6.ebuild b/media-gfx/librecad/librecad-2.1.3-r6.ebuild
index 9e36da264e46..f068df1cafc4 100644
--- a/media-gfx/librecad/librecad-2.1.3-r6.ebuild
+++ b/media-gfx/librecad/librecad-2.1.3-r6.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2021 Gentoo Authors
+# Copyright 1999-2022 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=7
@@ -11,7 +11,7 @@ SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.tar.gz -> ${P}.ta
LICENSE="GPL-2"
SLOT="0"
-KEYWORDS="amd64 ~ppc64 x86 ~amd64-linux ~x86-linux"
+KEYWORDS="amd64 ~ppc64 ~riscv x86 ~amd64-linux ~x86-linux"
IUSE="debug doc tools"
RDEPEND="
diff --git a/media-gfx/librecad/librecad-9999.ebuild b/media-gfx/librecad/librecad-9999.ebuild
index 4f1a71b35035..445cd8eabb8a 100644
--- a/media-gfx/librecad/librecad-9999.ebuild
+++ b/media-gfx/librecad/librecad-9999.ebuild
@@ -14,7 +14,7 @@ if [[ ${PV} == *9999* ]]; then
else
SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.tar.gz -> ${P}.tar.gz"
S="${WORKDIR}/LibreCAD-${PV}"
- KEYWORDS="~amd64 ~ppc64 ~x86 ~amd64-linux ~x86-linux"
+ KEYWORDS="~amd64 ~ppc64 ~riscv ~x86 ~amd64-linux ~x86-linux"
fi
LICENSE="GPL-2"
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2021-05-09 19:12 Andreas Sturmlechner
0 siblings, 0 replies; 41+ messages in thread
From: Andreas Sturmlechner @ 2021-05-09 19:12 UTC (permalink / raw
To: gentoo-commits
commit: 0c8aadc5bd665342c9fa0b1bf2fa8a00e7400887
Author: Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
AuthorDate: Sun May 9 19:05:58 2021 +0000
Commit: Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
CommitDate: Sun May 9 19:12:11 2021 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=0c8aadc5
media-gfx/librecad: Fix metainfo install path
Drop IUSE=3d in 9999 too, amazingly, a follow-up to 3a46e048.
Closes: https://bugs.gentoo.org/726036
Package-Manager: Portage-3.0.18, Repoman-3.0.3
Signed-off-by: Andreas Sturmlechner <asturm <AT> gentoo.org>
...{librecad-2.1.3-r5.ebuild => librecad-2.1.3-r6.ebuild} | 2 +-
media-gfx/librecad/librecad-9999.ebuild | 14 +++++++-------
media-gfx/librecad/metadata.xml | 15 +++++++--------
3 files changed, 15 insertions(+), 16 deletions(-)
diff --git a/media-gfx/librecad/librecad-2.1.3-r5.ebuild b/media-gfx/librecad/librecad-2.1.3-r6.ebuild
similarity index 97%
rename from media-gfx/librecad/librecad-2.1.3-r5.ebuild
rename to media-gfx/librecad/librecad-2.1.3-r6.ebuild
index 7b21b0e12ca..9e36da264e4 100644
--- a/media-gfx/librecad/librecad-2.1.3-r5.ebuild
+++ b/media-gfx/librecad/librecad-2.1.3-r6.ebuild
@@ -51,7 +51,7 @@ src_install() {
insinto /usr/share/${PN}
doins -r unix/resources/*
use doc && docinto html && dodoc -r librecad/support/doc/*
- insinto /usr/share/appdata
+ insinto /usr/share/metainfo
doins unix/appdata/librecad.appdata.xml
doicon librecad/res/main/${PN}.png
make_desktop_entry ${PN} LibreCAD ${PN} Graphics
diff --git a/media-gfx/librecad/librecad-9999.ebuild b/media-gfx/librecad/librecad-9999.ebuild
index 04902b991e9..4f1a71b3503 100644
--- a/media-gfx/librecad/librecad-9999.ebuild
+++ b/media-gfx/librecad/librecad-9999.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2020 Gentoo Authors
+# Copyright 1999-2021 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=7
@@ -14,16 +14,13 @@ if [[ ${PV} == *9999* ]]; then
else
SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.tar.gz -> ${P}.tar.gz"
S="${WORKDIR}/LibreCAD-${PV}"
+ KEYWORDS="~amd64 ~ppc64 ~x86 ~amd64-linux ~x86-linux"
fi
LICENSE="GPL-2"
SLOT="0"
-KEYWORDS=""
-IUSE="3d debug doc tools"
+IUSE="debug doc tools"
-BDEPEND="
- dev-qt/linguist-tools:5
-"
RDEPEND="
dev-cpp/muParser
dev-libs/boost:=
@@ -38,6 +35,9 @@ DEPEND="${RDEPEND}
dev-qt/qthelp:5
dev-qt/qtxml:5
"
+BDEPEND="
+ dev-qt/linguist-tools:5
+"
src_configure() {
eqmake5 -r
@@ -49,7 +49,7 @@ src_install() {
insinto /usr/share/${PN}
doins -r unix/resources/*
use doc && docinto html && dodoc -r librecad/support/doc/*
- insinto /usr/share/appdata
+ insinto /usr/share/metainfo
doins unix/appdata/librecad.appdata.xml
doicon librecad/res/main/${PN}.png
make_desktop_entry ${PN} LibreCAD ${PN} Graphics
diff --git a/media-gfx/librecad/metadata.xml b/media-gfx/librecad/metadata.xml
index e83f7a4a702..803bf3514a8 100644
--- a/media-gfx/librecad/metadata.xml
+++ b/media-gfx/librecad/metadata.xml
@@ -1,12 +1,11 @@
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd">
<pkgmetadata>
- <!-- maintainer-needed -->
- <use>
- <flag name="3d">Require all 2D coordinates stored as 3D</flag>
- <flag name="tools">Build additional tool programs: tff2lff</flag>
- </use>
- <upstream>
- <remote-id type="github">LibreCAD/LibreCAD</remote-id>
- </upstream>
+ <!-- maintainer-needed -->
+ <use>
+ <flag name="tools">Build additional tool programs: tff2lff</flag>
+ </use>
+ <upstream>
+ <remote-id type="github">LibreCAD/LibreCAD</remote-id>
+ </upstream>
</pkgmetadata>
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2020-06-05 9:43 Andreas Sturmlechner
0 siblings, 0 replies; 41+ messages in thread
From: Andreas Sturmlechner @ 2020-06-05 9:43 UTC (permalink / raw
To: gentoo-commits
commit: c24cdf0184821e1b3318d7593af4e56752cd10ad
Author: Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
AuthorDate: Fri Jun 5 09:30:03 2020 +0000
Commit: Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
CommitDate: Fri Jun 5 09:43:20 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c24cdf01
media-gfx/librecad: Drop broken 2.1.3-r4
Package-Manager: Portage-2.3.100, Repoman-2.3.22
Signed-off-by: Andreas Sturmlechner <asturm <AT> gentoo.org>
media-gfx/librecad/librecad-2.1.3-r4.ebuild | 51 -----------------------------
1 file changed, 51 deletions(-)
diff --git a/media-gfx/librecad/librecad-2.1.3-r4.ebuild b/media-gfx/librecad/librecad-2.1.3-r4.ebuild
deleted file mode 100644
index f5656b76120..00000000000
--- a/media-gfx/librecad/librecad-2.1.3-r4.ebuild
+++ /dev/null
@@ -1,51 +0,0 @@
-# Copyright 1999-2019 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-inherit desktop qmake-utils
-
-DESCRIPTION="Generic 2D CAD program"
-HOMEPAGE="https://www.librecad.org/"
-SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.tar.gz -> ${P}.tar.gz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ~ppc64 x86 ~amd64-linux ~x86-linux"
-
-IUSE="3d debug doc tools"
-
-RDEPEND="
- dev-cpp/muParser
- dev-libs/boost:=
- dev-qt/qtcore:5
- dev-qt/qtgui:5
- dev-qt/qtprintsupport:5
- dev-qt/qtsvg:5
- dev-qt/qtwidgets:5
- media-libs/freetype:2"
-DEPEND="${RDEPEND}
- dev-qt/linguist-tools:5
- dev-qt/qthelp:5
- dev-qt/qtxml:5
-"
-
-S="${WORKDIR}/LibreCAD-${PV}"
-
-PATCHES=( "${FILESDIR}/${P}-qt-5.11.patch" )
-
-src_configure() {
- eqmake5 -r
-}
-
-src_install() {
- dobin unix/librecad
- use tools && dobin unix/ttf2lff
- insinto /usr/share/${PN}
- doins -r unix/resources/*
- use doc && docinto html && dodoc -r librecad/support/doc/*
- insinto /usr/share/appdata
- doins unix/appdata/librecad.appdata.xml
- doicon librecad/res/main/${PN}.png
- make_desktop_entry ${PN} LibreCAD ${PN} Graphics
-}
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2020-05-29 7:39 Agostino Sarubbo
0 siblings, 0 replies; 41+ messages in thread
From: Agostino Sarubbo @ 2020-05-29 7:39 UTC (permalink / raw
To: gentoo-commits
commit: 93663c32f90aa1cc9d5c61b18e3a2022b7fde625
Author: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
AuthorDate: Fri May 29 07:36:52 2020 +0000
Commit: Agostino Sarubbo <ago <AT> gentoo <DOT> org>
CommitDate: Fri May 29 07:36:52 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=93663c32
media-gfx/librecad: amd64 stable wrt bug #699716
Package-Manager: Portage-2.3.99, Repoman-2.3.22
RepoMan-Options: --include-arches="amd64"
Signed-off-by: Agostino Sarubbo <ago <AT> gentoo.org>
media-gfx/librecad/librecad-2.1.3-r5.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/librecad/librecad-2.1.3-r5.ebuild b/media-gfx/librecad/librecad-2.1.3-r5.ebuild
index 1c3ced1015e..054af7f65e7 100644
--- a/media-gfx/librecad/librecad-2.1.3-r5.ebuild
+++ b/media-gfx/librecad/librecad-2.1.3-r5.ebuild
@@ -11,7 +11,7 @@ SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.tar.gz -> ${P}.ta
LICENSE="GPL-2"
SLOT="0"
-KEYWORDS="~amd64 ~ppc64 ~x86 ~amd64-linux ~x86-linux"
+KEYWORDS="amd64 ~ppc64 ~x86 ~amd64-linux ~x86-linux"
IUSE="debug doc tools"
BDEPEND="
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2020-05-20 12:25 Andreas Sturmlechner
0 siblings, 0 replies; 41+ messages in thread
From: Andreas Sturmlechner @ 2020-05-20 12:25 UTC (permalink / raw
To: gentoo-commits
commit: 953c12e77b526a4ae94ad14228d1a9e0b883e9cd
Author: Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
AuthorDate: Wed May 20 12:06:32 2020 +0000
Commit: Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
CommitDate: Wed May 20 12:24:51 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=953c12e7
media-gfx/librecad: Fix live ebuild by adding a release switch
Reported-by: Jérôme Borme <jerome.borme <AT> laposte.net>
Closes: https://bugs.gentoo.org/705804
Package-Manager: Portage-2.3.99, Repoman-2.3.22
Signed-off-by: Andreas Sturmlechner <asturm <AT> gentoo.org>
media-gfx/librecad/librecad-9999.ebuild | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/media-gfx/librecad/librecad-9999.ebuild b/media-gfx/librecad/librecad-9999.ebuild
index f24977427ab..04902b991e9 100644
--- a/media-gfx/librecad/librecad-9999.ebuild
+++ b/media-gfx/librecad/librecad-9999.ebuild
@@ -3,11 +3,18 @@
EAPI=7
-inherit desktop git-r3 qmake-utils
+inherit desktop qmake-utils
DESCRIPTION="Generic 2D CAD program"
HOMEPAGE="https://www.librecad.org/"
-EGIT_REPO_URI="https://github.com/LibreCAD/LibreCAD.git"
+
+if [[ ${PV} == *9999* ]]; then
+ EGIT_REPO_URI="https://github.com/LibreCAD/LibreCAD.git"
+ inherit git-r3
+else
+ SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.tar.gz -> ${P}.tar.gz"
+ S="${WORKDIR}/LibreCAD-${PV}"
+fi
LICENSE="GPL-2"
SLOT="0"
@@ -32,8 +39,6 @@ DEPEND="${RDEPEND}
dev-qt/qtxml:5
"
-S="${WORKDIR}/LibreCAD-${PV}"
-
src_configure() {
eqmake5 -r
}
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2020-05-20 12:25 Andreas Sturmlechner
0 siblings, 0 replies; 41+ messages in thread
From: Andreas Sturmlechner @ 2020-05-20 12:25 UTC (permalink / raw
To: gentoo-commits
commit: 1ad32a5cbbbae69877bb1db250ccfcaa7545dd45
Author: Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
AuthorDate: Wed May 20 11:54:22 2020 +0000
Commit: Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
CommitDate: Wed May 20 12:24:51 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=1ad32a5c
media-gfx/librecad: EAPI-7 bump
Package-Manager: Portage-2.3.99, Repoman-2.3.22
Signed-off-by: Andreas Sturmlechner <asturm <AT> gentoo.org>
media-gfx/librecad/librecad-2.1.3-r5.ebuild | 17 +++++++++++------
media-gfx/librecad/librecad-9999.ebuild | 12 +++++++-----
2 files changed, 18 insertions(+), 11 deletions(-)
diff --git a/media-gfx/librecad/librecad-2.1.3-r5.ebuild b/media-gfx/librecad/librecad-2.1.3-r5.ebuild
index 5bb715ffa4e..b9ce27bf50e 100644
--- a/media-gfx/librecad/librecad-2.1.3-r5.ebuild
+++ b/media-gfx/librecad/librecad-2.1.3-r5.ebuild
@@ -1,7 +1,7 @@
-# Copyright 1999-2019 Gentoo Authors
+# Copyright 1999-2020 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
-EAPI=6
+EAPI=7
inherit desktop qmake-utils
@@ -12,9 +12,11 @@ SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.tar.gz -> ${P}.ta
LICENSE="GPL-2"
SLOT="0"
KEYWORDS="~amd64 ~ppc64 ~x86 ~amd64-linux ~x86-linux"
-
IUSE="debug doc tools"
+BDEPEND="
+ dev-qt/linguist-tools:5
+"
RDEPEND="
dev-cpp/muParser
dev-libs/boost:=
@@ -23,16 +25,19 @@ RDEPEND="
dev-qt/qtprintsupport:5
dev-qt/qtsvg:5
dev-qt/qtwidgets:5
- media-libs/freetype:2"
+ media-libs/freetype:2
+"
DEPEND="${RDEPEND}
- dev-qt/linguist-tools:5
dev-qt/qthelp:5
dev-qt/qtxml:5
"
S="${WORKDIR}/LibreCAD-${PV}"
-PATCHES=( "${FILESDIR}/${P}-qt-5.11.patch" "${FILESDIR}/${P}-gcc-9.patch" )
+PATCHES=(
+ "${FILESDIR}/${P}-qt-5.11.patch"
+ "${FILESDIR}/${P}-gcc-9.patch"
+)
src_configure() {
eqmake5 -r
diff --git a/media-gfx/librecad/librecad-9999.ebuild b/media-gfx/librecad/librecad-9999.ebuild
index 4c0e87ee95e..f24977427ab 100644
--- a/media-gfx/librecad/librecad-9999.ebuild
+++ b/media-gfx/librecad/librecad-9999.ebuild
@@ -1,7 +1,7 @@
-# Copyright 1999-2018 Gentoo Foundation
+# Copyright 1999-2020 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
-EAPI=6
+EAPI=7
inherit desktop git-r3 qmake-utils
@@ -12,9 +12,11 @@ EGIT_REPO_URI="https://github.com/LibreCAD/LibreCAD.git"
LICENSE="GPL-2"
SLOT="0"
KEYWORDS=""
-
IUSE="3d debug doc tools"
+BDEPEND="
+ dev-qt/linguist-tools:5
+"
RDEPEND="
dev-cpp/muParser
dev-libs/boost:=
@@ -23,9 +25,9 @@ RDEPEND="
dev-qt/qtprintsupport:5
dev-qt/qtsvg:5
dev-qt/qtwidgets:5
- media-libs/freetype:2"
+ media-libs/freetype:2
+"
DEPEND="${RDEPEND}
- dev-qt/linguist-tools:5
dev-qt/qthelp:5
dev-qt/qtxml:5
"
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2019-08-15 19:47 Slawek Lis
0 siblings, 0 replies; 41+ messages in thread
From: Slawek Lis @ 2019-08-15 19:47 UTC (permalink / raw
To: gentoo-commits
commit: 3a46e048cded5c8f32e6db2575fd99dded163bcf
Author: Slawomir Lis <slis <AT> gentoo <DOT> org>
AuthorDate: Thu Aug 15 19:41:44 2019 +0000
Commit: Slawek Lis <slis <AT> gentoo <DOT> org>
CommitDate: Thu Aug 15 19:43:17 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=3a46e048
media-gfx/librecad: Removed unused flag 3d
Use flag "3d" seems to not being used. Removed.
Closes: https://bugs.gentoo.org/667050
Package-Manager: Portage-2.3.71, Repoman-2.3.16
Signed-off-by: Slawek Lis <slis <AT> gentoo.org>
media-gfx/librecad/librecad-2.1.3-r5.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/librecad/librecad-2.1.3-r5.ebuild b/media-gfx/librecad/librecad-2.1.3-r5.ebuild
index 2c3fc115cc9..5bb715ffa4e 100644
--- a/media-gfx/librecad/librecad-2.1.3-r5.ebuild
+++ b/media-gfx/librecad/librecad-2.1.3-r5.ebuild
@@ -13,7 +13,7 @@ LICENSE="GPL-2"
SLOT="0"
KEYWORDS="~amd64 ~ppc64 ~x86 ~amd64-linux ~x86-linux"
-IUSE="3d debug doc tools"
+IUSE="debug doc tools"
RDEPEND="
dev-cpp/muParser
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2019-02-02 21:07 Sergei Trofimovich
0 siblings, 0 replies; 41+ messages in thread
From: Sergei Trofimovich @ 2019-02-02 21:07 UTC (permalink / raw
To: gentoo-commits
commit: acfb6de0edf1e89d6258b73c7836afcfa9d36902
Author: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
AuthorDate: Sat Feb 2 21:06:40 2019 +0000
Commit: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
CommitDate: Sat Feb 2 21:06:40 2019 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=acfb6de0
media-gfx/librecad: keyworded 2.1.3-r4 for ppc64, bug #676870
Package-Manager: Portage-2.3.59, Repoman-2.3.12
RepoMan-Options: --include-arches="ppc64"
Signed-off-by: Sergei Trofimovich <slyfox <AT> gentoo.org>
media-gfx/librecad/librecad-2.1.3-r4.ebuild | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/media-gfx/librecad/librecad-2.1.3-r4.ebuild b/media-gfx/librecad/librecad-2.1.3-r4.ebuild
index 874bb483159..f5656b76120 100644
--- a/media-gfx/librecad/librecad-2.1.3-r4.ebuild
+++ b/media-gfx/librecad/librecad-2.1.3-r4.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2018 Gentoo Foundation
+# Copyright 1999-2019 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=6
@@ -11,7 +11,7 @@ SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.tar.gz -> ${P}.ta
LICENSE="GPL-2"
SLOT="0"
-KEYWORDS="amd64 x86 ~amd64-linux ~x86-linux"
+KEYWORDS="amd64 ~ppc64 x86 ~amd64-linux ~x86-linux"
IUSE="3d debug doc tools"
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2018-12-16 23:53 Andreas Sturmlechner
0 siblings, 0 replies; 41+ messages in thread
From: Andreas Sturmlechner @ 2018-12-16 23:53 UTC (permalink / raw
To: gentoo-commits
commit: d04606727ad800134313cf65927aa7101f936efd
Author: Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
AuthorDate: Sun Dec 16 23:10:47 2018 +0000
Commit: Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
CommitDate: Sun Dec 16 23:53:21 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d0460672
media-gfx/librecad: Drop 2.1.3-r2
Package-Manager: Portage-2.3.52, Repoman-2.3.12
Signed-off-by: Andreas Sturmlechner <asturm <AT> gentoo.org>
media-gfx/librecad/Manifest | 1 -
media-gfx/librecad/librecad-2.1.3-r2.ebuild | 56 -----------------------------
2 files changed, 57 deletions(-)
diff --git a/media-gfx/librecad/Manifest b/media-gfx/librecad/Manifest
index af31055f733..fcff5ba5ec8 100644
--- a/media-gfx/librecad/Manifest
+++ b/media-gfx/librecad/Manifest
@@ -1,2 +1 @@
DIST librecad-2.1.3.tar.gz 22415288 BLAKE2B fb920113a7e4b2e9e7e3425f77364c36f6be676a3cd109798786b06d31698fd11437bc7f50cb843ca02d761730e83db7fde475d1bce6a65336a845b5b0114918 SHA512 246cffcc1ea3389997b4a738ab5e3d78e8c1096817ecb1ca28f38d601bc5d1a95f60798ac82308914a34da7b5dbc302b8363cf8b58a97221fdc8ee63010adc6c
-DIST librecad-2.1.3.zip 26086377 BLAKE2B 7f137c1f6c80f10b803ffbe8a739c230664d81003e47dc0f7b82509fdf0534e5fe046cbc6efaa75149daeaf6f0fa217c1fd08e4de83c74361c99108b6b8fd53a SHA512 9a41c17b512ccbc1a0ebb0e6da8e7297663490479f042fadaffda819e371afc7fa49b789449df9fd4e36a2e2b6f95b9b5be19df47cf3c4252111db2a7ed7f009
diff --git a/media-gfx/librecad/librecad-2.1.3-r2.ebuild b/media-gfx/librecad/librecad-2.1.3-r2.ebuild
deleted file mode 100644
index aedbfb3814e..00000000000
--- a/media-gfx/librecad/librecad-2.1.3-r2.ebuild
+++ /dev/null
@@ -1,56 +0,0 @@
-# Copyright 1999-2018 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-inherit eutils qmake-utils
-
-DESCRIPTION="Generic 2D CAD program"
-HOMEPAGE="https://www.librecad.org/"
-SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 x86 ~amd64-linux ~x86-linux"
-
-IUSE="3d debug doc tools"
-
-DEPEND="
- dev-cpp/muParser
- dev-libs/boost:=
- dev-qt/qtcore:5
- dev-qt/qtgui:5
- dev-qt/qthelp:5
- dev-qt/qtprintsupport:5
- dev-qt/qtsvg:5
- dev-qt/qtwidgets:5
- dev-qt/qtxml:5
- media-libs/freetype:2"
-
-RDEPEND="${DEPEND}"
-S="${WORKDIR}/LibreCAD-${PV}"
-
-src_prepare() {
-# epatch "${FILESDIR}/iota-fix-2.1.1.patch"
-
- # currently RS_VECTOR3D causes an internal compiler error on GCC-4.8
- if ! use 3d; then
- sed -i -e '/RS_VECTOR2D/ s/^#//' librecad/src/src.pro || die
- fi
-}
-
-src_configure() {
- eqmake5 -r
-}
-
-src_install() {
- dobin unix/librecad
- use tools && dobin unix/ttf2lff
- insinto /usr/share/${PN}
- doins -r unix/resources/*
- use doc && insinto html && dodoc -r librecad/support/doc/*
- insinto /usr/share/appdata
- doins unix/appdata/librecad.appdata.xml
- doicon librecad/res/main/${PN}.png
- make_desktop_entry ${PN} LibreCAD ${PN} Graphics
-}
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2018-09-09 8:27 Mikle Kolyada
0 siblings, 0 replies; 41+ messages in thread
From: Mikle Kolyada @ 2018-09-09 8:27 UTC (permalink / raw
To: gentoo-commits
commit: 47676f41dfc9a7cd32c7b61b7859c015ed36bf90
Author: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
AuthorDate: Sun Sep 9 08:27:02 2018 +0000
Commit: Mikle Kolyada <zlogene <AT> gentoo <DOT> org>
CommitDate: Sun Sep 9 08:27:02 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=47676f41
media-gfx/librecad: amd64 stable wrt bug #664560
Package-Manager: Portage-2.3.40, Repoman-2.3.9
media-gfx/librecad/librecad-2.1.3-r4.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/librecad/librecad-2.1.3-r4.ebuild b/media-gfx/librecad/librecad-2.1.3-r4.ebuild
index 5e3ef74458b..874bb483159 100644
--- a/media-gfx/librecad/librecad-2.1.3-r4.ebuild
+++ b/media-gfx/librecad/librecad-2.1.3-r4.ebuild
@@ -11,7 +11,7 @@ SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.tar.gz -> ${P}.ta
LICENSE="GPL-2"
SLOT="0"
-KEYWORDS="~amd64 x86 ~amd64-linux ~x86-linux"
+KEYWORDS="amd64 x86 ~amd64-linux ~x86-linux"
IUSE="3d debug doc tools"
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2018-09-02 23:46 Thomas Deutschmann
0 siblings, 0 replies; 41+ messages in thread
From: Thomas Deutschmann @ 2018-09-02 23:46 UTC (permalink / raw
To: gentoo-commits
commit: d25b06fb7699e0f2c1756a28596837520c6e651a
Author: Thomas Deutschmann <whissi <AT> gentoo <DOT> org>
AuthorDate: Sun Sep 2 23:19:00 2018 +0000
Commit: Thomas Deutschmann <whissi <AT> gentoo <DOT> org>
CommitDate: Sun Sep 2 23:19:00 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=d25b06fb
media-gfx/librecad: x86 stable (bug #664560)
Package-Manager: Portage-2.3.48, Repoman-2.3.10
media-gfx/librecad/librecad-2.1.3-r4.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/librecad/librecad-2.1.3-r4.ebuild b/media-gfx/librecad/librecad-2.1.3-r4.ebuild
index f7542aac6ff..5e3ef74458b 100644
--- a/media-gfx/librecad/librecad-2.1.3-r4.ebuild
+++ b/media-gfx/librecad/librecad-2.1.3-r4.ebuild
@@ -11,7 +11,7 @@ SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.tar.gz -> ${P}.ta
LICENSE="GPL-2"
SLOT="0"
-KEYWORDS="~amd64 ~x86 ~amd64-linux ~x86-linux"
+KEYWORDS="~amd64 x86 ~amd64-linux ~x86-linux"
IUSE="3d debug doc tools"
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2018-07-01 0:03 Andreas Sturmlechner
0 siblings, 0 replies; 41+ messages in thread
From: Andreas Sturmlechner @ 2018-07-01 0:03 UTC (permalink / raw
To: gentoo-commits
commit: c3c966fc1c2175b8a6cddce6a7ecabad340e0a9c
Author: Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
AuthorDate: Sat Jun 30 23:40:07 2018 +0000
Commit: Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
CommitDate: Sun Jul 1 00:03:40 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c3c966fc
media-gfx/librecad: Drop 2.1.3-r3
Package-Manager: Portage-2.3.41, Repoman-2.3.9
media-gfx/librecad/librecad-2.1.3-r3.ebuild | 56 -----------------------------
1 file changed, 56 deletions(-)
diff --git a/media-gfx/librecad/librecad-2.1.3-r3.ebuild b/media-gfx/librecad/librecad-2.1.3-r3.ebuild
deleted file mode 100644
index 52d397d7a4b..00000000000
--- a/media-gfx/librecad/librecad-2.1.3-r3.ebuild
+++ /dev/null
@@ -1,56 +0,0 @@
-# Copyright 1999-2018 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-inherit eutils qmake-utils
-
-DESCRIPTION="Generic 2D CAD program"
-HOMEPAGE="https://www.librecad.org/"
-SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~x86 ~amd64-linux ~x86-linux"
-
-IUSE="3d debug doc tools"
-
-DEPEND="
- dev-cpp/muParser
- dev-libs/boost:=
- dev-qt/qtcore:5
- dev-qt/qtgui:5
- dev-qt/qthelp:5
- dev-qt/qtprintsupport:5
- dev-qt/qtsvg:5
- dev-qt/qtwidgets:5
- dev-qt/qtxml:5
- media-libs/freetype:2"
-
-RDEPEND="${DEPEND}"
-S="${WORKDIR}/LibreCAD-${PV}"
-
-src_prepare() {
-# epatch "${FILESDIR}/iota-fix-2.1.1.patch"
-
- # currently RS_VECTOR3D causes an internal compiler error on GCC-4.8
- if ! use 3d; then
- sed -i -e '/RS_VECTOR2D/ s/^#//' librecad/src/src.pro || die
- fi
-}
-
-src_configure() {
- eqmake5 -r
-}
-
-src_install() {
- dobin unix/librecad
- use tools && dobin unix/ttf2lff
- insinto /usr/share/${PN}
- doins -r unix/resources/*
- use doc && docinto html && dodoc -r librecad/support/doc/*
- insinto /usr/share/appdata
- doins unix/appdata/librecad.appdata.xml
- doicon librecad/res/main/${PN}.png
- make_desktop_entry ${PN} LibreCAD ${PN} Graphics
-}
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2018-06-03 13:49 Aaron Bauman
0 siblings, 0 replies; 41+ messages in thread
From: Aaron Bauman @ 2018-06-03 13:49 UTC (permalink / raw
To: gentoo-commits
commit: 6e5918ccb6194822a1c87026c99d03dcd428af38
Author: Michael Mair-Keimberger <m.mairkeimberger <AT> gmail <DOT> com>
AuthorDate: Sun Jun 3 09:25:52 2018 +0000
Commit: Aaron Bauman <bman <AT> gentoo <DOT> org>
CommitDate: Sun Jun 3 13:48:19 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=6e5918cc
media-gfx/librecad: use HTTPs
media-gfx/librecad/librecad-2.1.3-r2.ebuild | 2 +-
media-gfx/librecad/librecad-2.1.3-r3.ebuild | 2 +-
media-gfx/librecad/librecad-9999.ebuild | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/media-gfx/librecad/librecad-2.1.3-r2.ebuild b/media-gfx/librecad/librecad-2.1.3-r2.ebuild
index f7735d744d3..aedbfb3814e 100644
--- a/media-gfx/librecad/librecad-2.1.3-r2.ebuild
+++ b/media-gfx/librecad/librecad-2.1.3-r2.ebuild
@@ -6,7 +6,7 @@ EAPI=5
inherit eutils qmake-utils
DESCRIPTION="Generic 2D CAD program"
-HOMEPAGE="http://www.librecad.org/"
+HOMEPAGE="https://www.librecad.org/"
SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
LICENSE="GPL-2"
diff --git a/media-gfx/librecad/librecad-2.1.3-r3.ebuild b/media-gfx/librecad/librecad-2.1.3-r3.ebuild
index 20902c58015..52d397d7a4b 100644
--- a/media-gfx/librecad/librecad-2.1.3-r3.ebuild
+++ b/media-gfx/librecad/librecad-2.1.3-r3.ebuild
@@ -6,7 +6,7 @@ EAPI=5
inherit eutils qmake-utils
DESCRIPTION="Generic 2D CAD program"
-HOMEPAGE="http://www.librecad.org/"
+HOMEPAGE="https://www.librecad.org/"
SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
LICENSE="GPL-2"
diff --git a/media-gfx/librecad/librecad-9999.ebuild b/media-gfx/librecad/librecad-9999.ebuild
index efb61a9472a..2ab7e7f06f7 100644
--- a/media-gfx/librecad/librecad-9999.ebuild
+++ b/media-gfx/librecad/librecad-9999.ebuild
@@ -6,7 +6,7 @@ EAPI=5
inherit eutils git-r3 qmake-utils
DESCRIPTION="Generic 2D CAD program"
-HOMEPAGE="http://www.librecad.org/"
+HOMEPAGE="https://www.librecad.org/"
SRC_URI=""
EGIT_REPO_URI="https://github.com/LibreCAD/LibreCAD.git"
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2018-01-22 8:40 Jeroen Roovers
0 siblings, 0 replies; 41+ messages in thread
From: Jeroen Roovers @ 2018-01-22 8:40 UTC (permalink / raw
To: gentoo-commits
commit: a2e67413ffef6eafd1e28ec3ecfaedd12ceb6dc5
Author: Jeroen Roovers <jer <AT> gentoo <DOT> org>
AuthorDate: Mon Jan 22 08:39:55 2018 +0000
Commit: Jeroen Roovers <jer <AT> gentoo <DOT> org>
CommitDate: Mon Jan 22 08:40:08 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=a2e67413
media-gfx/librecad: insinto -> docinto (bug #637950).
Package-Manager: Portage-2.3.20, Repoman-2.3.6
...{librecad-9999.ebuild => librecad-2.1.3-r3.ebuild} | 19 ++++++++++---------
media-gfx/librecad/librecad-9999.ebuild | 2 +-
2 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/media-gfx/librecad/librecad-9999.ebuild b/media-gfx/librecad/librecad-2.1.3-r3.ebuild
similarity index 69%
copy from media-gfx/librecad/librecad-9999.ebuild
copy to media-gfx/librecad/librecad-2.1.3-r3.ebuild
index de157dedc9e..20902c58015 100644
--- a/media-gfx/librecad/librecad-9999.ebuild
+++ b/media-gfx/librecad/librecad-2.1.3-r3.ebuild
@@ -3,16 +3,15 @@
EAPI=5
-inherit eutils git-r3 qmake-utils
+inherit eutils qmake-utils
DESCRIPTION="Generic 2D CAD program"
HOMEPAGE="http://www.librecad.org/"
-SRC_URI=""
-EGIT_REPO_URI="https://github.com/LibreCAD/LibreCAD.git"
+SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
LICENSE="GPL-2"
SLOT="0"
-KEYWORDS=""
+KEYWORDS="~amd64 ~x86 ~amd64-linux ~x86-linux"
IUSE="3d debug doc tools"
@@ -29,11 +28,15 @@ DEPEND="
media-libs/freetype:2"
RDEPEND="${DEPEND}"
-S="${WORKDIR}/librecad-${PV}"
+S="${WORKDIR}/LibreCAD-${PV}"
src_prepare() {
+# epatch "${FILESDIR}/iota-fix-2.1.1.patch"
+
# currently RS_VECTOR3D causes an internal compiler error on GCC-4.8
- use 3d || sed -i -e '/RS_VECTOR2D/ s/^#//' librecad/src/src.pro || die
+ if ! use 3d; then
+ sed -i -e '/RS_VECTOR2D/ s/^#//' librecad/src/src.pro || die
+ fi
}
src_configure() {
@@ -43,11 +46,9 @@ src_configure() {
src_install() {
dobin unix/librecad
use tools && dobin unix/ttf2lff
- insinto /usr/share
- doins -r unix/appdata
insinto /usr/share/${PN}
doins -r unix/resources/*
- use doc && insinto html && dodoc -r librecad/support/doc/*
+ use doc && docinto html && dodoc -r librecad/support/doc/*
insinto /usr/share/appdata
doins unix/appdata/librecad.appdata.xml
doicon librecad/res/main/${PN}.png
diff --git a/media-gfx/librecad/librecad-9999.ebuild b/media-gfx/librecad/librecad-9999.ebuild
index de157dedc9e..efb61a9472a 100644
--- a/media-gfx/librecad/librecad-9999.ebuild
+++ b/media-gfx/librecad/librecad-9999.ebuild
@@ -47,7 +47,7 @@ src_install() {
doins -r unix/appdata
insinto /usr/share/${PN}
doins -r unix/resources/*
- use doc && insinto html && dodoc -r librecad/support/doc/*
+ use doc && docinto html && dodoc -r librecad/support/doc/*
insinto /usr/share/appdata
doins unix/appdata/librecad.appdata.xml
doicon librecad/res/main/${PN}.png
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2018-01-15 22:01 Andreas Sturmlechner
0 siblings, 0 replies; 41+ messages in thread
From: Andreas Sturmlechner @ 2018-01-15 22:01 UTC (permalink / raw
To: gentoo-commits
commit: 26baf411d8389b060345bd6be4b91003bcd77f8c
Author: Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
AuthorDate: Mon Jan 15 21:59:53 2018 +0000
Commit: Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
CommitDate: Mon Jan 15 22:01:19 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=26baf411
media-gfx/librecad: Drop 2.1.3-r1
Closes: https://bugs.gentoo.org/631808
Package-Manager: Portage-2.3.19, Repoman-2.3.6
media-gfx/librecad/librecad-2.1.3-r1.ebuild | 69 -----------------------------
1 file changed, 69 deletions(-)
diff --git a/media-gfx/librecad/librecad-2.1.3-r1.ebuild b/media-gfx/librecad/librecad-2.1.3-r1.ebuild
deleted file mode 100644
index 0c5f0aeb256..00000000000
--- a/media-gfx/librecad/librecad-2.1.3-r1.ebuild
+++ /dev/null
@@ -1,69 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-inherit eutils qmake-utils
-
-DESCRIPTION="Generic 2D CAD program"
-HOMEPAGE="http://www.librecad.org/"
-SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 x86 ~amd64-linux ~x86-linux"
-
-IUSE="3d debug doc tools qt4 +qt5"
-REQUIRED_USE="|| ( qt4 qt5 )"
-
-DEPEND="
- qt4? (
- dev-qt/qtcore:4
- dev-qt/qtgui:4
- dev-qt/qtsvg:4
- dev-qt/qthelp:4
- )
- qt5? (
- dev-qt/qtcore:5
- dev-qt/qtgui:5
- dev-qt/qthelp:5
- dev-qt/qtprintsupport:5
- dev-qt/qtsvg:5
- dev-qt/qtwidgets:5
- dev-qt/qtxml:5
- )
- dev-libs/boost:=
- dev-cpp/muParser
- media-libs/freetype:2"
-
-RDEPEND="${DEPEND}"
-S="${WORKDIR}/LibreCAD-${PV}"
-
-src_prepare() {
-# epatch "${FILESDIR}/iota-fix-2.1.1.patch"
-
- # currently RS_VECTOR3D causes an internal compiler error on GCC-4.8
- if ! use 3d; then
- sed -i -e '/RS_VECTOR2D/ s/^#//' librecad/src/src.pro || die
- fi
-}
-
-src_configure() {
- if use qt4; then
- eqmake4 -r
- else
- eqmake5 -r
- fi
-}
-
-src_install() {
- dobin unix/librecad
- use tools && dobin unix/ttf2lff
- insinto /usr/share/${PN}
- doins -r unix/resources/*
- use doc && docinto html && dodoc -r librecad/support/doc/*
- insinto /usr/share/appdata
- doins unix/appdata/librecad.appdata.xml
- doicon librecad/res/main/${PN}.png
- make_desktop_entry ${PN} LibreCAD ${PN} Graphics
-}
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2018-01-15 22:01 Andreas Sturmlechner
0 siblings, 0 replies; 41+ messages in thread
From: Andreas Sturmlechner @ 2018-01-15 22:01 UTC (permalink / raw
To: gentoo-commits
commit: 6bf635ea3c75979708107db54345938de099e5b8
Author: Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
AuthorDate: Mon Jan 15 21:56:50 2018 +0000
Commit: Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
CommitDate: Mon Jan 15 22:01:19 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=6bf635ea
media-gfx/librecad: Drop bogus qt4 and qt5 USE flags
Bug: https://bugs.gentoo.org/631808
Package-Manager: Portage-2.3.19, Repoman-2.3.6
media-gfx/librecad/librecad-2.1.3-r2.ebuild | 21 +++++++++------------
media-gfx/librecad/librecad-9999.ebuild | 21 +++++++++------------
2 files changed, 18 insertions(+), 24 deletions(-)
diff --git a/media-gfx/librecad/librecad-2.1.3-r2.ebuild b/media-gfx/librecad/librecad-2.1.3-r2.ebuild
index f6bcfbe65bc..f7735d744d3 100644
--- a/media-gfx/librecad/librecad-2.1.3-r2.ebuild
+++ b/media-gfx/librecad/librecad-2.1.3-r2.ebuild
@@ -13,21 +13,18 @@ LICENSE="GPL-2"
SLOT="0"
KEYWORDS="amd64 x86 ~amd64-linux ~x86-linux"
-IUSE="3d debug doc tools qt4 +qt5"
-REQUIRED_USE="qt5"
+IUSE="3d debug doc tools"
DEPEND="
- qt5? (
- dev-qt/qtcore:5
- dev-qt/qtgui:5
- dev-qt/qthelp:5
- dev-qt/qtprintsupport:5
- dev-qt/qtsvg:5
- dev-qt/qtwidgets:5
- dev-qt/qtxml:5
- )
- dev-libs/boost:=
dev-cpp/muParser
+ dev-libs/boost:=
+ dev-qt/qtcore:5
+ dev-qt/qtgui:5
+ dev-qt/qthelp:5
+ dev-qt/qtprintsupport:5
+ dev-qt/qtsvg:5
+ dev-qt/qtwidgets:5
+ dev-qt/qtxml:5
media-libs/freetype:2"
RDEPEND="${DEPEND}"
diff --git a/media-gfx/librecad/librecad-9999.ebuild b/media-gfx/librecad/librecad-9999.ebuild
index 6122e6f4f0f..de157dedc9e 100644
--- a/media-gfx/librecad/librecad-9999.ebuild
+++ b/media-gfx/librecad/librecad-9999.ebuild
@@ -14,21 +14,18 @@ LICENSE="GPL-2"
SLOT="0"
KEYWORDS=""
-IUSE="3d debug doc tools qt4 +qt5"
-REQUIRED_USE="qt5"
+IUSE="3d debug doc tools"
DEPEND="
- qt5? (
- dev-qt/qtcore:5
- dev-qt/qtgui:5
- dev-qt/qthelp:5
- dev-qt/qtprintsupport:5
- dev-qt/qtsvg:5
- dev-qt/qtwidgets:5
- dev-qt/qtxml:5
- )
- dev-libs/boost:=
dev-cpp/muParser
+ dev-libs/boost:=
+ dev-qt/qtcore:5
+ dev-qt/qtgui:5
+ dev-qt/qthelp:5
+ dev-qt/qtprintsupport:5
+ dev-qt/qtsvg:5
+ dev-qt/qtwidgets:5
+ dev-qt/qtxml:5
media-libs/freetype:2"
RDEPEND="${DEPEND}"
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2018-01-15 22:01 Andreas Sturmlechner
0 siblings, 0 replies; 41+ messages in thread
From: Andreas Sturmlechner @ 2018-01-15 22:01 UTC (permalink / raw
To: gentoo-commits
commit: ff6616c7cc53ae69c9b56ccf8b97b79d9c4baf8a
Author: Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
AuthorDate: Mon Jan 15 21:54:35 2018 +0000
Commit: Andreas Sturmlechner <asturm <AT> gentoo <DOT> org>
CommitDate: Mon Jan 15 22:01:19 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=ff6616c7
media-gfx/librecad: Sync with 2.1.3-r2 ebuild
Bug: https://bugs.gentoo.org/631808
Package-Manager: Portage-2.3.19, Repoman-2.3.6
media-gfx/librecad/librecad-9999.ebuild | 25 +++++++------------------
1 file changed, 7 insertions(+), 18 deletions(-)
diff --git a/media-gfx/librecad/librecad-9999.ebuild b/media-gfx/librecad/librecad-9999.ebuild
index 4a1f2d51dc4..6122e6f4f0f 100644
--- a/media-gfx/librecad/librecad-9999.ebuild
+++ b/media-gfx/librecad/librecad-9999.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2015 Gentoo Foundation
+# Copyright 1999-2018 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
EAPI=5
@@ -13,16 +13,11 @@ EGIT_REPO_URI="https://github.com/LibreCAD/LibreCAD.git"
LICENSE="GPL-2"
SLOT="0"
KEYWORDS=""
+
IUSE="3d debug doc tools qt4 +qt5"
-REQUIRED_USE="|| ( qt4 qt5 )"
+REQUIRED_USE="qt5"
DEPEND="
- qt4? (
- dev-qt/qtcore:4
- dev-qt/qtgui:4
- dev-qt/qtsvg:4
- dev-qt/qthelp:4
- )
qt5? (
dev-qt/qtcore:5
dev-qt/qtgui:5
@@ -32,10 +27,9 @@ DEPEND="
dev-qt/qtwidgets:5
dev-qt/qtxml:5
)
-
- dev-libs/boost
+ dev-libs/boost:=
dev-cpp/muParser
- media-libs/freetype"
+ media-libs/freetype:2"
RDEPEND="${DEPEND}"
S="${WORKDIR}/librecad-${PV}"
@@ -46,12 +40,7 @@ src_prepare() {
}
src_configure() {
- if use qt4
- then
- eqmake4 -r
- else
- eqmake5 -r
- fi
+ eqmake5 -r
}
src_install() {
@@ -61,7 +50,7 @@ src_install() {
doins -r unix/appdata
insinto /usr/share/${PN}
doins -r unix/resources/*
- use doc && dohtml -r librecad/support/doc/*
+ use doc && insinto html && dodoc -r librecad/support/doc/*
insinto /usr/share/appdata
doins unix/appdata/librecad.appdata.xml
doicon librecad/res/main/${PN}.png
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2018-01-15 19:03 Tobias Klausmann
0 siblings, 0 replies; 41+ messages in thread
From: Tobias Klausmann @ 2018-01-15 19:03 UTC (permalink / raw
To: gentoo-commits
commit: 4b0438cc3905fc6af9e80f5508ccd64d2e9b1ad7
Author: Tobias Klausmann <klausman <AT> gentoo <DOT> org>
AuthorDate: Mon Jan 15 19:02:37 2018 +0000
Commit: Tobias Klausmann <klausman <AT> gentoo <DOT> org>
CommitDate: Mon Jan 15 19:02:37 2018 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=4b0438cc
media-gfx/librecad-2.1.3-r2: amd64 stable
Gentoo-Bug: http://bugs.gentoo.org/643316
media-gfx/librecad/librecad-2.1.3-r2.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/librecad/librecad-2.1.3-r2.ebuild b/media-gfx/librecad/librecad-2.1.3-r2.ebuild
index dfd56d2aaf2..f6bcfbe65bc 100644
--- a/media-gfx/librecad/librecad-2.1.3-r2.ebuild
+++ b/media-gfx/librecad/librecad-2.1.3-r2.ebuild
@@ -11,7 +11,7 @@ SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
LICENSE="GPL-2"
SLOT="0"
-KEYWORDS="~amd64 x86 ~amd64-linux ~x86-linux"
+KEYWORDS="amd64 x86 ~amd64-linux ~x86-linux"
IUSE="3d debug doc tools qt4 +qt5"
REQUIRED_USE="qt5"
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2017-11-27 6:50 Slawek Lis
0 siblings, 0 replies; 41+ messages in thread
From: Slawek Lis @ 2017-11-27 6:50 UTC (permalink / raw
To: gentoo-commits
commit: 1def1ab69db8cc2d7cf8fdcd9fc06018d1f4479e
Author: Slawomir Lis <slis <AT> gentoo <DOT> org>
AuthorDate: Mon Nov 27 06:48:37 2017 +0000
Commit: Slawek Lis <slis <AT> gentoo <DOT> org>
CommitDate: Mon Nov 27 06:49:49 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=1def1ab6
media-gfx/librecad: updated to version without qt4
librecad-2.1.3-r1 is marked stable, so new revision without qt4 added.
Reported in https://bugs.gentoo.org/631808
Package-Manager: Portage-2.3.16, Repoman-2.3.6
media-gfx/librecad/librecad-2.1.3-r2.ebuild | 59 +++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/media-gfx/librecad/librecad-2.1.3-r2.ebuild b/media-gfx/librecad/librecad-2.1.3-r2.ebuild
new file mode 100644
index 00000000000..517916041bd
--- /dev/null
+++ b/media-gfx/librecad/librecad-2.1.3-r2.ebuild
@@ -0,0 +1,59 @@
+# Copyright 1999-2017 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=5
+
+inherit eutils qmake-utils
+
+DESCRIPTION="Generic 2D CAD program"
+HOMEPAGE="http://www.librecad.org/"
+SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86 ~amd64-linux ~x86-linux"
+
+IUSE="3d debug doc tools qt4 +qt5"
+REQUIRED_USE="qt5"
+
+DEPEND="
+ qt5? (
+ dev-qt/qtcore:5
+ dev-qt/qtgui:5
+ dev-qt/qthelp:5
+ dev-qt/qtprintsupport:5
+ dev-qt/qtsvg:5
+ dev-qt/qtwidgets:5
+ dev-qt/qtxml:5
+ )
+ dev-libs/boost:=
+ dev-cpp/muParser
+ media-libs/freetype:2"
+
+RDEPEND="${DEPEND}"
+S="${WORKDIR}/LibreCAD-${PV}"
+
+src_prepare() {
+# epatch "${FILESDIR}/iota-fix-2.1.1.patch"
+
+ # currently RS_VECTOR3D causes an internal compiler error on GCC-4.8
+ if ! use 3d; then
+ sed -i -e '/RS_VECTOR2D/ s/^#//' librecad/src/src.pro || die
+ fi
+}
+
+src_configure() {
+ eqmake5 -r
+}
+
+src_install() {
+ dobin unix/librecad
+ use tools && dobin unix/ttf2lff
+ insinto /usr/share/${PN}
+ doins -r unix/resources/*
+ use doc && insinto html && dodoc -r librecad/support/doc/*
+ insinto /usr/share/appdata
+ doins unix/appdata/librecad.appdata.xml
+ doicon librecad/res/main/${PN}.png
+ make_desktop_entry ${PN} LibreCAD ${PN} Graphics
+}
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2017-11-18 13:08 Jeroen Roovers
0 siblings, 0 replies; 41+ messages in thread
From: Jeroen Roovers @ 2017-11-18 13:08 UTC (permalink / raw
To: gentoo-commits
commit: fd7d2d6d079e6dcd4f5e942046eb638997d8e9dd
Author: Jeroen Roovers <jer <AT> gentoo <DOT> org>
AuthorDate: Sat Nov 18 13:07:55 2017 +0000
Commit: Jeroen Roovers <jer <AT> gentoo <DOT> org>
CommitDate: Sat Nov 18 13:07:55 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=fd7d2d6d
media-gfx/librecad: Fix installing HTML files (bug #637950 by globus).
Package-Manager: Portage-2.3.14, Repoman-2.3.6
RepoMan-Options: --force
media-gfx/librecad/{librecad-2.1.3.ebuild => librecad-2.1.3-r1.ebuild} | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/librecad/librecad-2.1.3.ebuild b/media-gfx/librecad/librecad-2.1.3-r1.ebuild
similarity index 95%
rename from media-gfx/librecad/librecad-2.1.3.ebuild
rename to media-gfx/librecad/librecad-2.1.3-r1.ebuild
index 545c5595cac..0c5f0aeb256 100644
--- a/media-gfx/librecad/librecad-2.1.3.ebuild
+++ b/media-gfx/librecad/librecad-2.1.3-r1.ebuild
@@ -61,7 +61,7 @@ src_install() {
use tools && dobin unix/ttf2lff
insinto /usr/share/${PN}
doins -r unix/resources/*
- use doc && insinto html && dodoc -r librecad/support/doc/*
+ use doc && docinto html && dodoc -r librecad/support/doc/*
insinto /usr/share/appdata
doins unix/appdata/librecad.appdata.xml
doicon librecad/res/main/${PN}.png
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2017-10-31 18:07 Andreas Hüttel
0 siblings, 0 replies; 41+ messages in thread
From: Andreas Hüttel @ 2017-10-31 18:07 UTC (permalink / raw
To: gentoo-commits
commit: 99e31d7df188eec0b6d9c1233250e4752f9beea5
Author: Andreas K. Hüttel <dilfridge <AT> gentoo <DOT> org>
AuthorDate: Tue Oct 31 18:04:53 2017 +0000
Commit: Andreas Hüttel <dilfridge <AT> gentoo <DOT> org>
CommitDate: Tue Oct 31 18:06:56 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=99e31d7d
media-gfx/librecad: amd64 stable, bug 632436
Last arch, closing.
Closes: https://bugs.gentoo.org/632436
Package-Manager: Portage-2.3.13, Repoman-2.3.4
media-gfx/librecad/librecad-2.1.3.ebuild | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/librecad/librecad-2.1.3.ebuild b/media-gfx/librecad/librecad-2.1.3.ebuild
index b2e66a3c306..545c5595cac 100644
--- a/media-gfx/librecad/librecad-2.1.3.ebuild
+++ b/media-gfx/librecad/librecad-2.1.3.ebuild
@@ -11,7 +11,7 @@ SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
LICENSE="GPL-2"
SLOT="0"
-KEYWORDS="~amd64 x86 ~amd64-linux ~x86-linux"
+KEYWORDS="amd64 x86 ~amd64-linux ~x86-linux"
IUSE="3d debug doc tools qt4 +qt5"
REQUIRED_USE="|| ( qt4 qt5 )"
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2017-10-26 18:54 Thomas Deutschmann
0 siblings, 0 replies; 41+ messages in thread
From: Thomas Deutschmann @ 2017-10-26 18:54 UTC (permalink / raw
To: gentoo-commits
commit: b40bfaca6e90532e87d586b1176d82f9b22c4d6f
Author: Thomas Deutschmann <whissi <AT> gentoo <DOT> org>
AuthorDate: Thu Oct 26 18:40:11 2017 +0000
Commit: Thomas Deutschmann <whissi <AT> gentoo <DOT> org>
CommitDate: Thu Oct 26 18:53:43 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=b40bfaca
media-gfx/librecad: x86 stable (bug #632436)
Package-Manager: Portage-2.3.11, Repoman-2.3.3
media-gfx/librecad/librecad-2.1.3.ebuild | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/media-gfx/librecad/librecad-2.1.3.ebuild b/media-gfx/librecad/librecad-2.1.3.ebuild
index 5a20c3bc2c4..b2e66a3c306 100644
--- a/media-gfx/librecad/librecad-2.1.3.ebuild
+++ b/media-gfx/librecad/librecad-2.1.3.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2016 Gentoo Foundation
+# Copyright 1999-2017 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
EAPI=5
@@ -11,7 +11,7 @@ SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
LICENSE="GPL-2"
SLOT="0"
-KEYWORDS="~amd64 ~x86 ~amd64-linux ~x86-linux"
+KEYWORDS="~amd64 x86 ~amd64-linux ~x86-linux"
IUSE="3d debug doc tools qt4 +qt5"
REQUIRED_USE="|| ( qt4 qt5 )"
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2016-11-22 6:37 Slawek Lis
0 siblings, 0 replies; 41+ messages in thread
From: Slawek Lis @ 2016-11-22 6:37 UTC (permalink / raw
To: gentoo-commits
commit: 431247085c5ce58bcabc5e0969b986ca308f40ea
Author: Slawomir Lis <slis <AT> gentoo <DOT> org>
AuthorDate: Tue Nov 22 06:37:21 2016 +0000
Commit: Slawek Lis <slis <AT> gentoo <DOT> org>
CommitDate: Tue Nov 22 06:37:21 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=43124708
media-gfx/librecad: drop old versions
Package-Manager: portage-2.3.2
media-gfx/librecad/Manifest | 4 --
media-gfx/librecad/librecad-2.0.5.ebuild | 38 ------------------
media-gfx/librecad/librecad-2.0.6.ebuild | 38 ------------------
media-gfx/librecad/librecad-2.0.7.ebuild | 38 ------------------
media-gfx/librecad/librecad-2.0.8.ebuild | 67 --------------------------------
5 files changed, 185 deletions(-)
diff --git a/media-gfx/librecad/Manifest b/media-gfx/librecad/Manifest
index 604d39e..cc4f479 100644
--- a/media-gfx/librecad/Manifest
+++ b/media-gfx/librecad/Manifest
@@ -1,8 +1,4 @@
DIST librecad-2.0.3.zip 16590256 SHA256 4221348541c46c6e9698c1fa3471a14a81376e022a009a164a7f0d0035da4643 SHA512 c40952ae967d83197645bef65dac6e050ddeacf536401b2b99cd18d753462af086ac2a410c6746a92c094ad76fd9177a900c21531ed7b7fcdf1e4b0f7f070e00 WHIRLPOOL c2e1d33b17b7a47ffd9b3795ad292b22cb1225aceacf052494745243630b0537e21701930b9433ea235c462d65581efc2b5ccda3b37712d4ab639ab9bcc6a97d
-DIST librecad-2.0.5.zip 16743868 SHA256 00fba891ccf90328f122c081e9a55f5cf6a908932b92b4414f4ee3b186b48f87 SHA512 afacc5dd833d8a9daba0e9a93f9578f066ada6dff3de4676d8604bbfbce6fba5615c75f498b9ee242b3a7bfcb2746b97a3fbd6b97526990b4ad39757344e3cc5 WHIRLPOOL 5b79ebecec469083a5b13b3e71b76fd116baf935d09c04e979efd583ec58fd17a3bef9e707b3603bba3256527a845f9be4a10271daeaec3fee09ce7fe82fca36
-DIST librecad-2.0.6.zip 17401781 SHA256 09a58f9a4b578eb7381f299414344f82c6e320156c20b3ff1e9e1ae5f2770a30 SHA512 0f8452674659adc943d87aa3d70763682b3e5e7c82530afee98d50dfa4977e8f2e0efcd224087eed68a51727a234d58b8740b00ed0941b6af78dc2938ed15241 WHIRLPOOL 6bb40ae33f28b5ad6adfc91334741d3fe50c6a7f42b0e253554bfacd8f4e7152a495b9e62b8760f28de8c69c77aed73750e094db96d2757fad7cd58ed3200897
-DIST librecad-2.0.7.zip 17457197 SHA256 36d2fa1c60324bb743f0ddde0b9da1dc6b57a370422de714adef27a0cd32d9d2 SHA512 afbe094dd565e2b058c5b1c28e88b76b883d1b9f20f60047e5a7771ec5d353e6a3e73abee8e4d7ac5f916ead7fb15719cf7bab034d670f7d7f54ca394d314803 WHIRLPOOL 5d196be5e54e4ceb7f2650015f35bf6ba77440b7a81d51f68a9a15408d399779f5c61289a5adaacbf1538735f7f0761152371291bab8bc8c8fb8109c3e1ddfc3
-DIST librecad-2.0.8.zip 23469997 SHA256 3f3affbff85fd16746a0e551777c4f234d2b03384d04edf9483d36db1c7144a3 SHA512 d0dd1fdcaafbb7b83a8d0791e132633e9a72648d7d8d7ffdfc02bb092348472a05917df7ea1f2096404afabc92d586b75f6cafa3bc54da535bcaf005c96ed8a7 WHIRLPOOL 14ae2c433345b5081c92426913744d57f2fa4a97621fb55143995365381d5fbed6c8ad6a1f3a6d215dc4791e3493259b3e09801bfb288a85de7db87f010aae49
DIST librecad-2.0.9.zip 25524745 SHA256 3fd92e8249642462d41d688446393ee5e79f68b7b0d9878388c6c194af2cb43a SHA512 e2029389b2ced67a94d9411cb2f49f524ac12542409bc7829a043af9611dd51544fc431e364f4dcfb1a8b645b2bc6eb86fc74294726a65ee687f69bd7eb8f700 WHIRLPOOL 20aaa38cd92547bae6cee4b696f5b7f3699438481c5051af6112c6b1661ffb018509ff1fdcfb4591e8828c8ffcfcc5a3002c594dbcf95beba93e9768c5133c02
DIST librecad-2.1.1.zip 26085717 SHA256 a5d27119ff137611c090fb174890ed1312c56897fb1482327d676da148fbd7dc SHA512 82b27e75fddae798da0e30e0c560d3769dfddab936e33a3585fd3e871eccf88e51c28d5ed938a530cb65c2e2ecfc593772ca83a2d23dd29126aa8225595f3d01 WHIRLPOOL 50ac34d0bdf1cd55ee6f7a959c1c1430197ac8acb7739755887b726349e39c9a1fe32ef25cab285aeaf649057701256f6210750c986ddb67ed3f338c80e300ed
DIST librecad-2.1.3.zip 26086377 SHA256 f05af030c71192109c1472c6fd24696fcb564b2eb83ff9789b88bec2e93c10a3 SHA512 9a41c17b512ccbc1a0ebb0e6da8e7297663490479f042fadaffda819e371afc7fa49b789449df9fd4e36a2e2b6f95b9b5be19df47cf3c4252111db2a7ed7f009 WHIRLPOOL a0209b3513fd5f10e608795e34267d5efc7338996ba6cc485cbd9084200cb87fb8b51ab3f224520fc8c693c5ac3db8d049dde68011e8005922ad9c761625971c
diff --git a/media-gfx/librecad/librecad-2.0.5.ebuild b/media-gfx/librecad/librecad-2.0.5.ebuild
deleted file mode 100644
index 55dcce5..00000000
--- a/media-gfx/librecad/librecad-2.0.5.ebuild
+++ /dev/null
@@ -1,38 +0,0 @@
-# Copyright 1999-2014 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=5
-
-inherit eutils qt4-r2
-
-DESCRIPTION="Generic 2D CAD program"
-HOMEPAGE="http://www.librecad.org/"
-SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~x86"
-IUSE="debug doc tools"
-
-DEPEND="
- dev-cpp/muParser
- dev-qt/qtgui:4
- dev-qt/qthelp:4
- dev-qt/qtsvg:4
- dev-libs/boost
- media-libs/freetype
- "
-RDEPEND="${DEPEND}"
-
-S="${WORKDIR}/LibreCAD-${PV}"
-
-src_install() {
- dobin unix/librecad
- use tools && dobin unix/ttf2lff
- insinto /usr/share/${PN}
- doins -r unix/resources/*
- use doc && dohtml -r librecad/support/doc/*
- doicon librecad/res/main/${PN}.png
- make_desktop_entry ${PN} LibreCAD ${PN} Graphics
-}
diff --git a/media-gfx/librecad/librecad-2.0.6.ebuild b/media-gfx/librecad/librecad-2.0.6.ebuild
deleted file mode 100644
index 55dcce5..00000000
--- a/media-gfx/librecad/librecad-2.0.6.ebuild
+++ /dev/null
@@ -1,38 +0,0 @@
-# Copyright 1999-2014 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=5
-
-inherit eutils qt4-r2
-
-DESCRIPTION="Generic 2D CAD program"
-HOMEPAGE="http://www.librecad.org/"
-SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~x86"
-IUSE="debug doc tools"
-
-DEPEND="
- dev-cpp/muParser
- dev-qt/qtgui:4
- dev-qt/qthelp:4
- dev-qt/qtsvg:4
- dev-libs/boost
- media-libs/freetype
- "
-RDEPEND="${DEPEND}"
-
-S="${WORKDIR}/LibreCAD-${PV}"
-
-src_install() {
- dobin unix/librecad
- use tools && dobin unix/ttf2lff
- insinto /usr/share/${PN}
- doins -r unix/resources/*
- use doc && dohtml -r librecad/support/doc/*
- doicon librecad/res/main/${PN}.png
- make_desktop_entry ${PN} LibreCAD ${PN} Graphics
-}
diff --git a/media-gfx/librecad/librecad-2.0.7.ebuild b/media-gfx/librecad/librecad-2.0.7.ebuild
deleted file mode 100644
index 2379ae9..00000000
--- a/media-gfx/librecad/librecad-2.0.7.ebuild
+++ /dev/null
@@ -1,38 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=5
-
-inherit eutils qt4-r2
-
-DESCRIPTION="Generic 2D CAD program"
-HOMEPAGE="http://www.librecad.org/"
-SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~x86"
-IUSE="debug doc tools"
-
-DEPEND="
- dev-cpp/muParser
- dev-qt/qtgui:4
- dev-qt/qthelp:4
- dev-qt/qtsvg:4
- dev-libs/boost
- media-libs/freetype
- "
-RDEPEND="${DEPEND}"
-
-S="${WORKDIR}/LibreCAD-${PV}"
-
-src_install() {
- dobin unix/librecad
- use tools && dobin unix/ttf2lff
- insinto /usr/share/${PN}
- doins -r unix/resources/*
- use doc && dohtml -r librecad/support/doc/*
- doicon librecad/res/main/${PN}.png
- make_desktop_entry ${PN} LibreCAD ${PN} Graphics
-}
diff --git a/media-gfx/librecad/librecad-2.0.8.ebuild b/media-gfx/librecad/librecad-2.0.8.ebuild
deleted file mode 100644
index f2f3812..00000000
--- a/media-gfx/librecad/librecad-2.0.8.ebuild
+++ /dev/null
@@ -1,67 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=5
-
-inherit eutils qmake-utils
-
-DESCRIPTION="Generic 2D CAD program"
-HOMEPAGE="http://www.librecad.org/"
-SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~x86 ~amd64-linux ~x86-linux"
-
-IUSE="3d debug doc tools qt4 +qt5"
-REQUIRED_USE="|| ( qt4 qt5 )"
-
-DEPEND="
- qt4? (
- dev-qt/qtcore:4
- dev-qt/qtgui:4
- dev-qt/qtsvg:4
- dev-qt/qthelp:4
- )
- qt5? (
- dev-qt/qtcore:5
- dev-qt/qtgui:5
- dev-qt/qthelp:5
- dev-qt/qtprintsupport:5
- dev-qt/qtsvg:5
- dev-qt/qtwidgets:5
- dev-qt/qtxml:5
- )
- dev-libs/boost
- dev-cpp/muParser
- media-libs/freetype"
-
-RDEPEND="${DEPEND}"
-S="${WORKDIR}/LibreCAD-${PV}"
-
-src_prepare() {
- # currently RS_VECTOR3D causes an internal compiler error on GCC-4.8
- use 3d || sed -i -e '/RS_VECTOR2D/ s/^#//' librecad/src/src.pro || die
-}
-
-src_configure() {
- if use qt4
- then
- eqmake4 -r
- else
- eqmake5 -r
- fi
-}
-
-src_install() {
- dobin unix/librecad
- use tools && dobin unix/ttf2lff
- insinto /usr/share/${PN}
- doins -r unix/resources/*
- use doc && dohtml -r librecad/support/doc/*
- insinto /usr/share/appdata
- doins unix/appdata/librecad.appdata.xml
- doicon librecad/res/main/"${PN}".png
- make_desktop_entry ${PN} LibreCAD ${PN} Graphics
-}
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2016-11-22 6:37 Slawek Lis
0 siblings, 0 replies; 41+ messages in thread
From: Slawek Lis @ 2016-11-22 6:37 UTC (permalink / raw
To: gentoo-commits
commit: b4042737fc6ec488c63446a7a15b9a4e4f1151eb
Author: Slawomir Lis <slis <AT> gentoo <DOT> org>
AuthorDate: Tue Nov 22 06:34:16 2016 +0000
Commit: Slawek Lis <slis <AT> gentoo <DOT> org>
CommitDate: Tue Nov 22 06:34:16 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=b4042737
media-gfx/librecad: version bump to 2.1.3
This also should fix a bug 597704
Package-Manager: portage-2.3.2
media-gfx/librecad/Manifest | 1 +
media-gfx/librecad/librecad-2.1.3.ebuild | 70 ++++++++++++++++++++++++++++++++
2 files changed, 71 insertions(+)
diff --git a/media-gfx/librecad/Manifest b/media-gfx/librecad/Manifest
index 654dd1a..604d39e 100644
--- a/media-gfx/librecad/Manifest
+++ b/media-gfx/librecad/Manifest
@@ -5,3 +5,4 @@ DIST librecad-2.0.7.zip 17457197 SHA256 36d2fa1c60324bb743f0ddde0b9da1dc6b57a370
DIST librecad-2.0.8.zip 23469997 SHA256 3f3affbff85fd16746a0e551777c4f234d2b03384d04edf9483d36db1c7144a3 SHA512 d0dd1fdcaafbb7b83a8d0791e132633e9a72648d7d8d7ffdfc02bb092348472a05917df7ea1f2096404afabc92d586b75f6cafa3bc54da535bcaf005c96ed8a7 WHIRLPOOL 14ae2c433345b5081c92426913744d57f2fa4a97621fb55143995365381d5fbed6c8ad6a1f3a6d215dc4791e3493259b3e09801bfb288a85de7db87f010aae49
DIST librecad-2.0.9.zip 25524745 SHA256 3fd92e8249642462d41d688446393ee5e79f68b7b0d9878388c6c194af2cb43a SHA512 e2029389b2ced67a94d9411cb2f49f524ac12542409bc7829a043af9611dd51544fc431e364f4dcfb1a8b645b2bc6eb86fc74294726a65ee687f69bd7eb8f700 WHIRLPOOL 20aaa38cd92547bae6cee4b696f5b7f3699438481c5051af6112c6b1661ffb018509ff1fdcfb4591e8828c8ffcfcc5a3002c594dbcf95beba93e9768c5133c02
DIST librecad-2.1.1.zip 26085717 SHA256 a5d27119ff137611c090fb174890ed1312c56897fb1482327d676da148fbd7dc SHA512 82b27e75fddae798da0e30e0c560d3769dfddab936e33a3585fd3e871eccf88e51c28d5ed938a530cb65c2e2ecfc593772ca83a2d23dd29126aa8225595f3d01 WHIRLPOOL 50ac34d0bdf1cd55ee6f7a959c1c1430197ac8acb7739755887b726349e39c9a1fe32ef25cab285aeaf649057701256f6210750c986ddb67ed3f338c80e300ed
+DIST librecad-2.1.3.zip 26086377 SHA256 f05af030c71192109c1472c6fd24696fcb564b2eb83ff9789b88bec2e93c10a3 SHA512 9a41c17b512ccbc1a0ebb0e6da8e7297663490479f042fadaffda819e371afc7fa49b789449df9fd4e36a2e2b6f95b9b5be19df47cf3c4252111db2a7ed7f009 WHIRLPOOL a0209b3513fd5f10e608795e34267d5efc7338996ba6cc485cbd9084200cb87fb8b51ab3f224520fc8c693c5ac3db8d049dde68011e8005922ad9c761625971c
diff --git a/media-gfx/librecad/librecad-2.1.3.ebuild b/media-gfx/librecad/librecad-2.1.3.ebuild
new file mode 100644
index 00000000..323b447
--- /dev/null
+++ b/media-gfx/librecad/librecad-2.1.3.ebuild
@@ -0,0 +1,70 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+inherit eutils qmake-utils
+
+DESCRIPTION="Generic 2D CAD program"
+HOMEPAGE="http://www.librecad.org/"
+SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86 ~amd64-linux ~x86-linux"
+
+IUSE="3d debug doc tools qt4 +qt5"
+REQUIRED_USE="|| ( qt4 qt5 )"
+
+DEPEND="
+ qt4? (
+ dev-qt/qtcore:4
+ dev-qt/qtgui:4
+ dev-qt/qtsvg:4
+ dev-qt/qthelp:4
+ )
+ qt5? (
+ dev-qt/qtcore:5
+ dev-qt/qtgui:5
+ dev-qt/qthelp:5
+ dev-qt/qtprintsupport:5
+ dev-qt/qtsvg:5
+ dev-qt/qtwidgets:5
+ dev-qt/qtxml:5
+ )
+ dev-libs/boost:=
+ dev-cpp/muParser
+ media-libs/freetype:2"
+
+RDEPEND="${DEPEND}"
+S="${WORKDIR}/LibreCAD-${PV}"
+
+src_prepare() {
+# epatch "${FILESDIR}/iota-fix-2.1.1.patch"
+
+ # currently RS_VECTOR3D causes an internal compiler error on GCC-4.8
+ if ! use 3d; then
+ sed -i -e '/RS_VECTOR2D/ s/^#//' librecad/src/src.pro || die
+ fi
+}
+
+src_configure() {
+ if use qt4; then
+ eqmake4 -r
+ else
+ eqmake5 -r
+ fi
+}
+
+src_install() {
+ dobin unix/librecad
+ use tools && dobin unix/ttf2lff
+ insinto /usr/share/${PN}
+ doins -r unix/resources/*
+ use doc && insinto html && dodoc -r librecad/support/doc/*
+ insinto /usr/share/appdata
+ doins unix/appdata/librecad.appdata.xml
+ doicon librecad/res/main/${PN}.png
+ make_desktop_entry ${PN} LibreCAD ${PN} Graphics
+}
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2016-04-07 20:25 Sergei Trofimovich
0 siblings, 0 replies; 41+ messages in thread
From: Sergei Trofimovich @ 2016-04-07 20:25 UTC (permalink / raw
To: gentoo-commits
commit: 6edca6b364c1751cd0834bfaf61e9669a715b1c8
Author: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
AuthorDate: Thu Apr 7 20:24:37 2016 +0000
Commit: Sergei Trofimovich <slyfox <AT> gentoo <DOT> org>
CommitDate: Thu Apr 7 20:25:10 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=6edca6b3
media-gfx/librecad: fix typo: 'instinto' -> 'insinto'
Package-Manager: portage-2.2.28
media-gfx/librecad/{librecad-2.0.9.ebuild => librecad-2.0.9-r1.ebuild} | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/librecad/librecad-2.0.9.ebuild b/media-gfx/librecad/librecad-2.0.9-r1.ebuild
similarity index 95%
rename from media-gfx/librecad/librecad-2.0.9.ebuild
rename to media-gfx/librecad/librecad-2.0.9-r1.ebuild
index 587b962..d25fc87 100644
--- a/media-gfx/librecad/librecad-2.0.9.ebuild
+++ b/media-gfx/librecad/librecad-2.0.9-r1.ebuild
@@ -60,7 +60,7 @@ src_install() {
use tools && dobin unix/ttf2lff
insinto /usr/share/${PN}
doins -r unix/resources/*
- use doc && instinto html && dodoc -r librecad/support/doc/*
+ use doc && insinto html && dodoc -r librecad/support/doc/*
insinto /usr/share/appdata
doins unix/appdata/librecad.appdata.xml
doicon librecad/res/main/${PN}.png
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2016-01-19 8:34 Patrice Clement
0 siblings, 0 replies; 41+ messages in thread
From: Patrice Clement @ 2016-01-19 8:34 UTC (permalink / raw
To: gentoo-commits
commit: 4423efc4c2250a9957ecff78ee67a15868d1162e
Author: Dongxu Li <dongxuli2011 <AT> gmail <DOT> com>
AuthorDate: Wed Jan 13 18:42:30 2016 +0000
Commit: Patrice Clement <monsieurp <AT> gentoo <DOT> org>
CommitDate: Wed Jan 13 18:42:30 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=4423efc4
media-gfx/librecad: version bump 2.0.9
media-gfx/librecad/Manifest | 1 +
media-gfx/librecad/librecad-2.0.9.ebuild | 67 ++++++++++++++++++++++++++++++++
2 files changed, 68 insertions(+)
diff --git a/media-gfx/librecad/Manifest b/media-gfx/librecad/Manifest
index e00e88f..514b5dd 100644
--- a/media-gfx/librecad/Manifest
+++ b/media-gfx/librecad/Manifest
@@ -3,3 +3,4 @@ DIST librecad-2.0.5.zip 16743868 SHA256 00fba891ccf90328f122c081e9a55f5cf6a90893
DIST librecad-2.0.6.zip 17401781 SHA256 09a58f9a4b578eb7381f299414344f82c6e320156c20b3ff1e9e1ae5f2770a30 SHA512 0f8452674659adc943d87aa3d70763682b3e5e7c82530afee98d50dfa4977e8f2e0efcd224087eed68a51727a234d58b8740b00ed0941b6af78dc2938ed15241 WHIRLPOOL 6bb40ae33f28b5ad6adfc91334741d3fe50c6a7f42b0e253554bfacd8f4e7152a495b9e62b8760f28de8c69c77aed73750e094db96d2757fad7cd58ed3200897
DIST librecad-2.0.7.zip 17457197 SHA256 36d2fa1c60324bb743f0ddde0b9da1dc6b57a370422de714adef27a0cd32d9d2 SHA512 afbe094dd565e2b058c5b1c28e88b76b883d1b9f20f60047e5a7771ec5d353e6a3e73abee8e4d7ac5f916ead7fb15719cf7bab034d670f7d7f54ca394d314803 WHIRLPOOL 5d196be5e54e4ceb7f2650015f35bf6ba77440b7a81d51f68a9a15408d399779f5c61289a5adaacbf1538735f7f0761152371291bab8bc8c8fb8109c3e1ddfc3
DIST librecad-2.0.8.zip 23469997 SHA256 3f3affbff85fd16746a0e551777c4f234d2b03384d04edf9483d36db1c7144a3 SHA512 d0dd1fdcaafbb7b83a8d0791e132633e9a72648d7d8d7ffdfc02bb092348472a05917df7ea1f2096404afabc92d586b75f6cafa3bc54da535bcaf005c96ed8a7 WHIRLPOOL 14ae2c433345b5081c92426913744d57f2fa4a97621fb55143995365381d5fbed6c8ad6a1f3a6d215dc4791e3493259b3e09801bfb288a85de7db87f010aae49
+DIST librecad-2.0.9.zip 25524745 SHA256 3fd92e8249642462d41d688446393ee5e79f68b7b0d9878388c6c194af2cb43a SHA512 e2029389b2ced67a94d9411cb2f49f524ac12542409bc7829a043af9611dd51544fc431e364f4dcfb1a8b645b2bc6eb86fc74294726a65ee687f69bd7eb8f700 WHIRLPOOL 20aaa38cd92547bae6cee4b696f5b7f3699438481c5051af6112c6b1661ffb018509ff1fdcfb4591e8828c8ffcfcc5a3002c594dbcf95beba93e9768c5133c02
diff --git a/media-gfx/librecad/librecad-2.0.9.ebuild b/media-gfx/librecad/librecad-2.0.9.ebuild
new file mode 100644
index 0000000..01275c7
--- /dev/null
+++ b/media-gfx/librecad/librecad-2.0.9.ebuild
@@ -0,0 +1,67 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+inherit eutils qmake-utils
+
+DESCRIPTION="Generic 2D CAD program"
+HOMEPAGE="http://www.librecad.org/"
+SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86 ~amd64-linux ~x86-linux"
+
+IUSE="3d debug doc tools qt4 +qt5"
+REQUIRED_USE="|| ( qt4 qt5 )"
+
+DEPEND="
+ qt4? (
+ dev-qt/qtcore:4
+ dev-qt/qtgui:4
+ dev-qt/qtsvg:4
+ dev-qt/qthelp:4
+ )
+ qt5? (
+ dev-qt/qtcore:5
+ dev-qt/qtgui:5
+ dev-qt/qthelp:5
+ dev-qt/qtprintsupport:5
+ dev-qt/qtsvg:5
+ dev-qt/qtwidgets:5
+ dev-qt/qtxml:5
+ )
+ dev-libs/boost
+ dev-cpp/muParser
+ media-libs/freetype"
+
+RDEPEND="${DEPEND}"
+S="${WORKDIR}/LibreCAD-${PV}"
+
+src_prepare() {
+ # currently RS_VECTOR3D causes an internal compiler error on GCC-4.8
+ use 3d || sed -i -e '/RS_VECTOR2D/ s/^#//' librecad/src/src.pro || die
+}
+
+src_configure() {
+ if use qt4
+ then
+ eqmake4 -r
+ else
+ eqmake5 -r
+ fi
+}
+
+src_install() {
+ dobin unix/librecad
+ use tools && dobin unix/ttf2lff
+ insinto /usr/share/${PN}
+ doins -r unix/resources/*
+ use doc && dohtml -r librecad/support/doc/*
+ insinto /usr/share/appdata
+ doins unix/appdata/librecad.appdata.xml
+ doicon librecad/res/main/"${PN}".png
+ make_desktop_entry ${PN} LibreCAD ${PN} Graphics
+}
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2016-01-19 8:34 Patrice Clement
0 siblings, 0 replies; 41+ messages in thread
From: Patrice Clement @ 2016-01-19 8:34 UTC (permalink / raw
To: gentoo-commits
commit: 9b1cdc9741e6a0950bd9690aed3a40db19e72f86
Author: Dongxu Li <dongxuli2011 <AT> gmail <DOT> com>
AuthorDate: Thu Jan 14 15:04:36 2016 +0000
Commit: Patrice Clement <monsieurp <AT> gentoo <DOT> org>
CommitDate: Thu Jan 14 15:04:36 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=9b1cdc97
media-gfx/librecad: cleanup
media-gfx/librecad/librecad-2.0.9.ebuild | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/media-gfx/librecad/librecad-2.0.9.ebuild b/media-gfx/librecad/librecad-2.0.9.ebuild
index 01275c7..fb31be3 100644
--- a/media-gfx/librecad/librecad-2.0.9.ebuild
+++ b/media-gfx/librecad/librecad-2.0.9.ebuild
@@ -42,12 +42,13 @@ S="${WORKDIR}/LibreCAD-${PV}"
src_prepare() {
# currently RS_VECTOR3D causes an internal compiler error on GCC-4.8
- use 3d || sed -i -e '/RS_VECTOR2D/ s/^#//' librecad/src/src.pro || die
+ if ! use 3d; then
+ sed -i -e '/RS_VECTOR2D/ s/^#//' librecad/src/src.pro || die
+ fi
}
src_configure() {
- if use qt4
- then
+ if use qt4; then
eqmake4 -r
else
eqmake5 -r
@@ -59,9 +60,9 @@ src_install() {
use tools && dobin unix/ttf2lff
insinto /usr/share/${PN}
doins -r unix/resources/*
- use doc && dohtml -r librecad/support/doc/*
+ use doc && instinto html && dodoc -r librecad/support/doc/*
insinto /usr/share/appdata
doins unix/appdata/librecad.appdata.xml
- doicon librecad/res/main/"${PN}".png
+ doicon librecad/res/main/${PN}.png
make_desktop_entry ${PN} LibreCAD ${PN} Graphics
}
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2015-09-13 20:27 Anthony G. Basile
0 siblings, 0 replies; 41+ messages in thread
From: Anthony G. Basile @ 2015-09-13 20:27 UTC (permalink / raw
To: gentoo-commits
commit: 3997f2f30bee1019944f8e5f0fe37bcc2fc2e16b
Author: Anthony G. Basile <blueness <AT> gentoo <DOT> org>
AuthorDate: Sun Sep 13 20:31:29 2015 +0000
Commit: Anthony G. Basile <blueness <AT> gentoo <DOT> org>
CommitDate: Sun Sep 13 20:31:29 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=3997f2f3
media-gfx/librecad: fix manifest
Package-Manager: portage-2.2.20.1
media-gfx/librecad/Manifest | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/media-gfx/librecad/Manifest b/media-gfx/librecad/Manifest
index 56e5c32..e00e88f 100644
--- a/media-gfx/librecad/Manifest
+++ b/media-gfx/librecad/Manifest
@@ -2,4 +2,4 @@ DIST librecad-2.0.3.zip 16590256 SHA256 4221348541c46c6e9698c1fa3471a14a81376e02
DIST librecad-2.0.5.zip 16743868 SHA256 00fba891ccf90328f122c081e9a55f5cf6a908932b92b4414f4ee3b186b48f87 SHA512 afacc5dd833d8a9daba0e9a93f9578f066ada6dff3de4676d8604bbfbce6fba5615c75f498b9ee242b3a7bfcb2746b97a3fbd6b97526990b4ad39757344e3cc5 WHIRLPOOL 5b79ebecec469083a5b13b3e71b76fd116baf935d09c04e979efd583ec58fd17a3bef9e707b3603bba3256527a845f9be4a10271daeaec3fee09ce7fe82fca36
DIST librecad-2.0.6.zip 17401781 SHA256 09a58f9a4b578eb7381f299414344f82c6e320156c20b3ff1e9e1ae5f2770a30 SHA512 0f8452674659adc943d87aa3d70763682b3e5e7c82530afee98d50dfa4977e8f2e0efcd224087eed68a51727a234d58b8740b00ed0941b6af78dc2938ed15241 WHIRLPOOL 6bb40ae33f28b5ad6adfc91334741d3fe50c6a7f42b0e253554bfacd8f4e7152a495b9e62b8760f28de8c69c77aed73750e094db96d2757fad7cd58ed3200897
DIST librecad-2.0.7.zip 17457197 SHA256 36d2fa1c60324bb743f0ddde0b9da1dc6b57a370422de714adef27a0cd32d9d2 SHA512 afbe094dd565e2b058c5b1c28e88b76b883d1b9f20f60047e5a7771ec5d353e6a3e73abee8e4d7ac5f916ead7fb15719cf7bab034d670f7d7f54ca394d314803 WHIRLPOOL 5d196be5e54e4ceb7f2650015f35bf6ba77440b7a81d51f68a9a15408d399779f5c61289a5adaacbf1538735f7f0761152371291bab8bc8c8fb8109c3e1ddfc3
-DIST librecad-2.0.8.zip 178976 SHA256 fb285c97f8d13cec6630fa36828c4064a5bf49d5fc8fb8a86efa2369825a5b56 SHA512 42713ad616fdd1cec701c8f35015126795476de491e88bf2dda14f8a1038c112cf0db80fbfcc72285f796c5c530db763df995eed5a650836ca521f820031f703 WHIRLPOOL aaa5669a2711ce2078f46ca5ab3c4edae5ae726c640829b761b269b41891f40d5fd003a21fe1e93463df5cf9405c34c5c3e8a302e16ac3e3068d3066f737662a
+DIST librecad-2.0.8.zip 23469997 SHA256 3f3affbff85fd16746a0e551777c4f234d2b03384d04edf9483d36db1c7144a3 SHA512 d0dd1fdcaafbb7b83a8d0791e132633e9a72648d7d8d7ffdfc02bb092348472a05917df7ea1f2096404afabc92d586b75f6cafa3bc54da535bcaf005c96ed8a7 WHIRLPOOL 14ae2c433345b5081c92426913744d57f2fa4a97621fb55143995365381d5fbed6c8ad6a1f3a6d215dc4791e3493259b3e09801bfb288a85de7db87f010aae49
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2015-09-13 19:24 Slawek Lis
0 siblings, 0 replies; 41+ messages in thread
From: Slawek Lis @ 2015-09-13 19:24 UTC (permalink / raw
To: gentoo-commits
commit: 3b1b257c61f7c7eaa1bbcee342dd70221fb35573
Author: Sławomir Lis <slis <AT> gentoo <DOT> org>
AuthorDate: Sun Sep 13 19:25:22 2015 +0000
Commit: Slawek Lis <slis <AT> gentoo <DOT> org>
CommitDate: Sun Sep 13 19:26:18 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=3b1b257c
restoring stable version
Package-Manager: portage-2.2.20.1
RepoMan-Options: --force
media-gfx/librecad/Manifest | 3 ++-
media-gfx/librecad/librecad-2.0.3.ebuild | 38 ++++++++++++++++++++++++++++++++
2 files changed, 40 insertions(+), 1 deletion(-)
diff --git a/media-gfx/librecad/Manifest b/media-gfx/librecad/Manifest
index b31d576..56e5c32 100644
--- a/media-gfx/librecad/Manifest
+++ b/media-gfx/librecad/Manifest
@@ -1,4 +1,5 @@
+DIST librecad-2.0.3.zip 16590256 SHA256 4221348541c46c6e9698c1fa3471a14a81376e022a009a164a7f0d0035da4643 SHA512 c40952ae967d83197645bef65dac6e050ddeacf536401b2b99cd18d753462af086ac2a410c6746a92c094ad76fd9177a900c21531ed7b7fcdf1e4b0f7f070e00 WHIRLPOOL c2e1d33b17b7a47ffd9b3795ad292b22cb1225aceacf052494745243630b0537e21701930b9433ea235c462d65581efc2b5ccda3b37712d4ab639ab9bcc6a97d
DIST librecad-2.0.5.zip 16743868 SHA256 00fba891ccf90328f122c081e9a55f5cf6a908932b92b4414f4ee3b186b48f87 SHA512 afacc5dd833d8a9daba0e9a93f9578f066ada6dff3de4676d8604bbfbce6fba5615c75f498b9ee242b3a7bfcb2746b97a3fbd6b97526990b4ad39757344e3cc5 WHIRLPOOL 5b79ebecec469083a5b13b3e71b76fd116baf935d09c04e979efd583ec58fd17a3bef9e707b3603bba3256527a845f9be4a10271daeaec3fee09ce7fe82fca36
DIST librecad-2.0.6.zip 17401781 SHA256 09a58f9a4b578eb7381f299414344f82c6e320156c20b3ff1e9e1ae5f2770a30 SHA512 0f8452674659adc943d87aa3d70763682b3e5e7c82530afee98d50dfa4977e8f2e0efcd224087eed68a51727a234d58b8740b00ed0941b6af78dc2938ed15241 WHIRLPOOL 6bb40ae33f28b5ad6adfc91334741d3fe50c6a7f42b0e253554bfacd8f4e7152a495b9e62b8760f28de8c69c77aed73750e094db96d2757fad7cd58ed3200897
DIST librecad-2.0.7.zip 17457197 SHA256 36d2fa1c60324bb743f0ddde0b9da1dc6b57a370422de714adef27a0cd32d9d2 SHA512 afbe094dd565e2b058c5b1c28e88b76b883d1b9f20f60047e5a7771ec5d353e6a3e73abee8e4d7ac5f916ead7fb15719cf7bab034d670f7d7f54ca394d314803 WHIRLPOOL 5d196be5e54e4ceb7f2650015f35bf6ba77440b7a81d51f68a9a15408d399779f5c61289a5adaacbf1538735f7f0761152371291bab8bc8c8fb8109c3e1ddfc3
-DIST librecad-2.0.8.zip 23469997 SHA256 3f3affbff85fd16746a0e551777c4f234d2b03384d04edf9483d36db1c7144a3 SHA512 d0dd1fdcaafbb7b83a8d0791e132633e9a72648d7d8d7ffdfc02bb092348472a05917df7ea1f2096404afabc92d586b75f6cafa3bc54da535bcaf005c96ed8a7 WHIRLPOOL 14ae2c433345b5081c92426913744d57f2fa4a97621fb55143995365381d5fbed6c8ad6a1f3a6d215dc4791e3493259b3e09801bfb288a85de7db87f010aae49
+DIST librecad-2.0.8.zip 178976 SHA256 fb285c97f8d13cec6630fa36828c4064a5bf49d5fc8fb8a86efa2369825a5b56 SHA512 42713ad616fdd1cec701c8f35015126795476de491e88bf2dda14f8a1038c112cf0db80fbfcc72285f796c5c530db763df995eed5a650836ca521f820031f703 WHIRLPOOL aaa5669a2711ce2078f46ca5ab3c4edae5ae726c640829b761b269b41891f40d5fd003a21fe1e93463df5cf9405c34c5c3e8a302e16ac3e3068d3066f737662a
diff --git a/media-gfx/librecad/librecad-2.0.3.ebuild b/media-gfx/librecad/librecad-2.0.3.ebuild
new file mode 100644
index 0000000..85a61fb
--- /dev/null
+++ b/media-gfx/librecad/librecad-2.0.3.ebuild
@@ -0,0 +1,38 @@
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+inherit eutils qt4-r2
+
+DESCRIPTION="Generic 2D CAD program"
+HOMEPAGE="http://www.librecad.org/"
+SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="amd64 x86"
+IUSE="debug doc tools"
+
+DEPEND="
+ dev-cpp/muParser
+ dev-qt/qtgui:4
+ dev-qt/qthelp:4
+ dev-qt/qtsvg:4
+ dev-libs/boost
+ media-libs/freetype
+ "
+RDEPEND="${DEPEND}"
+
+S="${WORKDIR}/LibreCAD-${PV}"
+
+src_install() {
+ dobin unix/librecad
+ use tools && dobin unix/ttf2lff
+ insinto /usr/share/${PN}
+ doins -r unix/resources/*
+ use doc && dohtml -r librecad/support/doc/*
+ doicon librecad/res/main/${PN}.png
+ make_desktop_entry ${PN} LibreCAD ${PN} Graphics
+}
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2015-09-08 6:30 Slawek Lis
0 siblings, 0 replies; 41+ messages in thread
From: Slawek Lis @ 2015-09-08 6:30 UTC (permalink / raw
To: gentoo-commits
commit: c7c422d3d93efb17ef1d2253b2013ad3b201614c
Author: Sławomir Lis <slis <AT> gentoo <DOT> org>
AuthorDate: Tue Sep 8 06:30:53 2015 +0000
Commit: Slawek Lis <slis <AT> gentoo <DOT> org>
CommitDate: Tue Sep 8 06:30:53 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=c7c422d3
version bump (thanks to dxli)
Pull request at: https://github.com/gentoo/gentoo/pull/46
Package-Manager: portage-2.2.20.1
media-gfx/librecad/Manifest | 1 +
media-gfx/librecad/librecad-2.0.8.ebuild | 67 ++++++++++++++++++++++++++++++
media-gfx/librecad/librecad-9999.ebuild | 70 ++++++++++++++++++++++++++++++++
media-gfx/librecad/metadata.xml | 3 +-
4 files changed, 140 insertions(+), 1 deletion(-)
diff --git a/media-gfx/librecad/Manifest b/media-gfx/librecad/Manifest
index e1de478..b31d576 100644
--- a/media-gfx/librecad/Manifest
+++ b/media-gfx/librecad/Manifest
@@ -1,3 +1,4 @@
DIST librecad-2.0.5.zip 16743868 SHA256 00fba891ccf90328f122c081e9a55f5cf6a908932b92b4414f4ee3b186b48f87 SHA512 afacc5dd833d8a9daba0e9a93f9578f066ada6dff3de4676d8604bbfbce6fba5615c75f498b9ee242b3a7bfcb2746b97a3fbd6b97526990b4ad39757344e3cc5 WHIRLPOOL 5b79ebecec469083a5b13b3e71b76fd116baf935d09c04e979efd583ec58fd17a3bef9e707b3603bba3256527a845f9be4a10271daeaec3fee09ce7fe82fca36
DIST librecad-2.0.6.zip 17401781 SHA256 09a58f9a4b578eb7381f299414344f82c6e320156c20b3ff1e9e1ae5f2770a30 SHA512 0f8452674659adc943d87aa3d70763682b3e5e7c82530afee98d50dfa4977e8f2e0efcd224087eed68a51727a234d58b8740b00ed0941b6af78dc2938ed15241 WHIRLPOOL 6bb40ae33f28b5ad6adfc91334741d3fe50c6a7f42b0e253554bfacd8f4e7152a495b9e62b8760f28de8c69c77aed73750e094db96d2757fad7cd58ed3200897
DIST librecad-2.0.7.zip 17457197 SHA256 36d2fa1c60324bb743f0ddde0b9da1dc6b57a370422de714adef27a0cd32d9d2 SHA512 afbe094dd565e2b058c5b1c28e88b76b883d1b9f20f60047e5a7771ec5d353e6a3e73abee8e4d7ac5f916ead7fb15719cf7bab034d670f7d7f54ca394d314803 WHIRLPOOL 5d196be5e54e4ceb7f2650015f35bf6ba77440b7a81d51f68a9a15408d399779f5c61289a5adaacbf1538735f7f0761152371291bab8bc8c8fb8109c3e1ddfc3
+DIST librecad-2.0.8.zip 23469997 SHA256 3f3affbff85fd16746a0e551777c4f234d2b03384d04edf9483d36db1c7144a3 SHA512 d0dd1fdcaafbb7b83a8d0791e132633e9a72648d7d8d7ffdfc02bb092348472a05917df7ea1f2096404afabc92d586b75f6cafa3bc54da535bcaf005c96ed8a7 WHIRLPOOL 14ae2c433345b5081c92426913744d57f2fa4a97621fb55143995365381d5fbed6c8ad6a1f3a6d215dc4791e3493259b3e09801bfb288a85de7db87f010aae49
diff --git a/media-gfx/librecad/librecad-2.0.8.ebuild b/media-gfx/librecad/librecad-2.0.8.ebuild
new file mode 100644
index 0000000..f2f3812
--- /dev/null
+++ b/media-gfx/librecad/librecad-2.0.8.ebuild
@@ -0,0 +1,67 @@
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+inherit eutils qmake-utils
+
+DESCRIPTION="Generic 2D CAD program"
+HOMEPAGE="http://www.librecad.org/"
+SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86 ~amd64-linux ~x86-linux"
+
+IUSE="3d debug doc tools qt4 +qt5"
+REQUIRED_USE="|| ( qt4 qt5 )"
+
+DEPEND="
+ qt4? (
+ dev-qt/qtcore:4
+ dev-qt/qtgui:4
+ dev-qt/qtsvg:4
+ dev-qt/qthelp:4
+ )
+ qt5? (
+ dev-qt/qtcore:5
+ dev-qt/qtgui:5
+ dev-qt/qthelp:5
+ dev-qt/qtprintsupport:5
+ dev-qt/qtsvg:5
+ dev-qt/qtwidgets:5
+ dev-qt/qtxml:5
+ )
+ dev-libs/boost
+ dev-cpp/muParser
+ media-libs/freetype"
+
+RDEPEND="${DEPEND}"
+S="${WORKDIR}/LibreCAD-${PV}"
+
+src_prepare() {
+ # currently RS_VECTOR3D causes an internal compiler error on GCC-4.8
+ use 3d || sed -i -e '/RS_VECTOR2D/ s/^#//' librecad/src/src.pro || die
+}
+
+src_configure() {
+ if use qt4
+ then
+ eqmake4 -r
+ else
+ eqmake5 -r
+ fi
+}
+
+src_install() {
+ dobin unix/librecad
+ use tools && dobin unix/ttf2lff
+ insinto /usr/share/${PN}
+ doins -r unix/resources/*
+ use doc && dohtml -r librecad/support/doc/*
+ insinto /usr/share/appdata
+ doins unix/appdata/librecad.appdata.xml
+ doicon librecad/res/main/"${PN}".png
+ make_desktop_entry ${PN} LibreCAD ${PN} Graphics
+}
diff --git a/media-gfx/librecad/librecad-9999.ebuild b/media-gfx/librecad/librecad-9999.ebuild
new file mode 100644
index 0000000..0c9ba9b
--- /dev/null
+++ b/media-gfx/librecad/librecad-9999.ebuild
@@ -0,0 +1,70 @@
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+inherit eutils git-r3 qmake-utils
+
+DESCRIPTION="Generic 2D CAD program"
+HOMEPAGE="http://www.librecad.org/"
+SRC_URI=""
+EGIT_REPO_URI="https://github.com/LibreCAD/LibreCAD.git"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS=""
+IUSE="3d debug doc tools qt4 +qt5"
+REQUIRED_USE="|| ( qt4 qt5 )"
+
+DEPEND="
+ qt4? (
+ dev-qt/qtcore:4
+ dev-qt/qtgui:4
+ dev-qt/qtsvg:4
+ dev-qt/qthelp:4
+ )
+ qt5? (
+ dev-qt/qtcore:5
+ dev-qt/qtgui:5
+ dev-qt/qthelp:5
+ dev-qt/qtprintsupport:5
+ dev-qt/qtsvg:5
+ dev-qt/qtwidgets:5
+ dev-qt/qtxml:5
+ )
+
+ dev-libs/boost
+ dev-cpp/muParser
+ media-libs/freetype"
+
+RDEPEND="${DEPEND}"
+S="${WORKDIR}/librecad-${PV}"
+
+src_prepare() {
+ # currently RS_VECTOR3D causes an internal compiler error on GCC-4.8
+ use 3d || sed -i -e '/RS_VECTOR2D/ s/^#//' librecad/src/src.pro || die
+}
+
+src_configure() {
+ if use qt4
+ then
+ eqmake4 -r
+ else
+ eqmake5 -r
+ fi
+}
+
+src_install() {
+ dobin unix/librecad
+ use tools && dobin unix/ttf2lff
+ insinto /usr/share
+ doins -r unix/appdata
+ insinto /usr/share/${PN}
+ doins -r unix/resources/*
+ use doc && dohtml -r librecad/support/doc/*
+ insinto /usr/share/appdata
+ doins unix/appdata/librecad.appdata.xml
+ doicon librecad/res/main/${PN}.png
+ make_desktop_entry ${PN} LibreCAD ${PN} Graphics
+}
diff --git a/media-gfx/librecad/metadata.xml b/media-gfx/librecad/metadata.xml
index ab2b883..d34c73e 100644
--- a/media-gfx/librecad/metadata.xml
+++ b/media-gfx/librecad/metadata.xml
@@ -5,7 +5,8 @@
<email>slis@gentoo.org</email>
</maintainer>
<use>
- <flag name="tools">Build additional tool programs</flag>
+ <flag name="3d">Require all 2D coordinates stored as 3D</flag>
+ <flag name="tools">Build additional tool programs: tff2lff</flag>
</use>
<upstream>
<remote-id type="github">LibreCAD/LibreCAD</remote-id>
^ permalink raw reply related [flat|nested] 41+ messages in thread* [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/
@ 2015-09-02 5:56 Slawek Lis
0 siblings, 0 replies; 41+ messages in thread
From: Slawek Lis @ 2015-09-02 5:56 UTC (permalink / raw
To: gentoo-commits
commit: e694a96fa462af9c8e1bb76bd2ea66e7dc55d7cb
Author: Sławomir Lis <slis <AT> gentoo <DOT> org>
AuthorDate: Wed Sep 2 05:57:44 2015 +0000
Commit: Slawek Lis <slis <AT> gentoo <DOT> org>
CommitDate: Wed Sep 2 05:57:44 2015 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e694a96f
version bump (#555806)
Package-Manager: portage-2.2.20.1
media-gfx/librecad/Manifest | 3 +-
media-gfx/librecad/librecad-2.0.3.ebuild | 38 ----------------------
...librecad-2.0.4.ebuild => librecad-2.0.7.ebuild} | 2 +-
3 files changed, 2 insertions(+), 41 deletions(-)
diff --git a/media-gfx/librecad/Manifest b/media-gfx/librecad/Manifest
index 4ad4b45..e1de478 100644
--- a/media-gfx/librecad/Manifest
+++ b/media-gfx/librecad/Manifest
@@ -1,4 +1,3 @@
-DIST librecad-2.0.3.zip 16590256 SHA256 4221348541c46c6e9698c1fa3471a14a81376e022a009a164a7f0d0035da4643 SHA512 c40952ae967d83197645bef65dac6e050ddeacf536401b2b99cd18d753462af086ac2a410c6746a92c094ad76fd9177a900c21531ed7b7fcdf1e4b0f7f070e00 WHIRLPOOL c2e1d33b17b7a47ffd9b3795ad292b22cb1225aceacf052494745243630b0537e21701930b9433ea235c462d65581efc2b5ccda3b37712d4ab639ab9bcc6a97d
-DIST librecad-2.0.4.zip 16658203 SHA256 3a3252ec978cf6001f9e7686955d45f413359ed2963ae01f113d6839720e3e19 SHA512 bd68738167a121e63c9d7738155b6b74e5faee910839b70a49619c62f1f8b3c1c3eab43cf8d89a538b1952c7f327dbc284a0a246d45597dae64e332ddb8fe077 WHIRLPOOL 6d201862426d52f3a89473add5ba8172f4f5b3dd82e89609eb98d5f1e013c9ef64a66d18141ad2c9d67a6354eec4637c0cdf3450cfcedae89237d79484aae96d
DIST librecad-2.0.5.zip 16743868 SHA256 00fba891ccf90328f122c081e9a55f5cf6a908932b92b4414f4ee3b186b48f87 SHA512 afacc5dd833d8a9daba0e9a93f9578f066ada6dff3de4676d8604bbfbce6fba5615c75f498b9ee242b3a7bfcb2746b97a3fbd6b97526990b4ad39757344e3cc5 WHIRLPOOL 5b79ebecec469083a5b13b3e71b76fd116baf935d09c04e979efd583ec58fd17a3bef9e707b3603bba3256527a845f9be4a10271daeaec3fee09ce7fe82fca36
DIST librecad-2.0.6.zip 17401781 SHA256 09a58f9a4b578eb7381f299414344f82c6e320156c20b3ff1e9e1ae5f2770a30 SHA512 0f8452674659adc943d87aa3d70763682b3e5e7c82530afee98d50dfa4977e8f2e0efcd224087eed68a51727a234d58b8740b00ed0941b6af78dc2938ed15241 WHIRLPOOL 6bb40ae33f28b5ad6adfc91334741d3fe50c6a7f42b0e253554bfacd8f4e7152a495b9e62b8760f28de8c69c77aed73750e094db96d2757fad7cd58ed3200897
+DIST librecad-2.0.7.zip 17457197 SHA256 36d2fa1c60324bb743f0ddde0b9da1dc6b57a370422de714adef27a0cd32d9d2 SHA512 afbe094dd565e2b058c5b1c28e88b76b883d1b9f20f60047e5a7771ec5d353e6a3e73abee8e4d7ac5f916ead7fb15719cf7bab034d670f7d7f54ca394d314803 WHIRLPOOL 5d196be5e54e4ceb7f2650015f35bf6ba77440b7a81d51f68a9a15408d399779f5c61289a5adaacbf1538735f7f0761152371291bab8bc8c8fb8109c3e1ddfc3
diff --git a/media-gfx/librecad/librecad-2.0.3.ebuild b/media-gfx/librecad/librecad-2.0.3.ebuild
deleted file mode 100644
index 85a61fb..0000000
--- a/media-gfx/librecad/librecad-2.0.3.ebuild
+++ /dev/null
@@ -1,38 +0,0 @@
-# Copyright 1999-2014 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=5
-
-inherit eutils qt4-r2
-
-DESCRIPTION="Generic 2D CAD program"
-HOMEPAGE="http://www.librecad.org/"
-SRC_URI="https://github.com/LibreCAD/LibreCAD/archive/${PV/_/}.zip -> ${P}.zip"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 x86"
-IUSE="debug doc tools"
-
-DEPEND="
- dev-cpp/muParser
- dev-qt/qtgui:4
- dev-qt/qthelp:4
- dev-qt/qtsvg:4
- dev-libs/boost
- media-libs/freetype
- "
-RDEPEND="${DEPEND}"
-
-S="${WORKDIR}/LibreCAD-${PV}"
-
-src_install() {
- dobin unix/librecad
- use tools && dobin unix/ttf2lff
- insinto /usr/share/${PN}
- doins -r unix/resources/*
- use doc && dohtml -r librecad/support/doc/*
- doicon librecad/res/main/${PN}.png
- make_desktop_entry ${PN} LibreCAD ${PN} Graphics
-}
diff --git a/media-gfx/librecad/librecad-2.0.4.ebuild b/media-gfx/librecad/librecad-2.0.7.ebuild
similarity index 94%
rename from media-gfx/librecad/librecad-2.0.4.ebuild
rename to media-gfx/librecad/librecad-2.0.7.ebuild
index 55dcce5..2379ae9 100644
--- a/media-gfx/librecad/librecad-2.0.4.ebuild
+++ b/media-gfx/librecad/librecad-2.0.7.ebuild
@@ -1,4 +1,4 @@
-# Copyright 1999-2014 Gentoo Foundation
+# Copyright 1999-2015 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Id$
^ permalink raw reply related [flat|nested] 41+ messages in thread
end of thread, other threads:[~2024-10-25 7:31 UTC | newest]
Thread overview: 41+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-01-19 8:34 [gentoo-commits] repo/gentoo:master commit in: media-gfx/librecad/ Patrice Clement
-- strict thread matches above, loose matches on Subject: below --
2024-10-25 7:31 Yixun Lan
2024-09-22 7:20 Sam James
2024-09-22 7:20 Sam James
2024-06-30 0:00 Conrad Kostecki
2023-03-17 18:26 Sam James
2023-03-17 17:22 Sam James
2023-02-05 9:13 Joonas Niilola
2023-01-25 4:29 John Helmert III
2022-11-28 7:05 Joonas Niilola
2022-01-22 8:41 Yixun Lan
2021-05-09 19:12 Andreas Sturmlechner
2020-06-05 9:43 Andreas Sturmlechner
2020-05-29 7:39 Agostino Sarubbo
2020-05-20 12:25 Andreas Sturmlechner
2020-05-20 12:25 Andreas Sturmlechner
2019-08-15 19:47 Slawek Lis
2019-02-02 21:07 Sergei Trofimovich
2018-12-16 23:53 Andreas Sturmlechner
2018-09-09 8:27 Mikle Kolyada
2018-09-02 23:46 Thomas Deutschmann
2018-07-01 0:03 Andreas Sturmlechner
2018-06-03 13:49 Aaron Bauman
2018-01-22 8:40 Jeroen Roovers
2018-01-15 22:01 Andreas Sturmlechner
2018-01-15 22:01 Andreas Sturmlechner
2018-01-15 22:01 Andreas Sturmlechner
2018-01-15 19:03 Tobias Klausmann
2017-11-27 6:50 Slawek Lis
2017-11-18 13:08 Jeroen Roovers
2017-10-31 18:07 Andreas Hüttel
2017-10-26 18:54 Thomas Deutschmann
2016-11-22 6:37 Slawek Lis
2016-11-22 6:37 Slawek Lis
2016-04-07 20:25 Sergei Trofimovich
2016-01-19 8:34 Patrice Clement
2016-01-19 8:34 Patrice Clement
2015-09-13 20:27 Anthony G. Basile
2015-09-13 19:24 Slawek Lis
2015-09-08 6:30 Slawek Lis
2015-09-02 5:56 Slawek Lis
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox