[gentoo-commits] repo/gentoo:master commit in: sci-libs/linux-gpib/

["Andreas Hüttel" <dilfridge@gentoo.org>]

commit:     40c8422220c09b427b927b460ce490b28427bf64
Author:     Andreas K. Huettel (dilfridge) <dilfridge <AT> gentoo <DOT> org>
AuthorDate: Fri Nov 20 12:08:04 2015 +0000
Commit:     Andreas Hüttel <dilfridge <AT> gentoo <DOT> org>
CommitDate: Fri Nov 20 12:08:51 2015 +0000
URL:        https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=40c84222

sci-libs/linux-gpib: Remove old

Package-Manager: portage-2.2.25

 sci-libs/linux-gpib/Manifest                    |   1 -
 sci-libs/linux-gpib/linux-gpib-3.2.20-r1.ebuild | 183 ------------------------
 sci-libs/linux-gpib/linux-gpib-3.2.21.ebuild    | 183 ------------------------
 3 files changed, 367 deletions(-)

diff --git a/sci-libs/linux-gpib/Manifest b/sci-libs/linux-gpib/Manifest
index 32a8ffc..a69e209 100644
--- a/sci-libs/linux-gpib/Manifest
+++ b/sci-libs/linux-gpib/Manifest
@@ -1,5 +1,4 @@
 DIST gpib_firmware-2006-11-12.tar.gz 169357 SHA256 98380a8d12e6e34dccc0c1d82b48ed796c0c0f5571107d6a685524560aa8d701 SHA512 164d6fcfb3af43933f0a16645276f7d527a7aa24ef311f6ae3dcd7f45c41f92c855cf221bc946772f43fc2f9524057abc34bbd7d805c89b33ed7e111bc6870af WHIRLPOOL 44506c9d03e746f5bc88f9a2f20e07879a4c4c72f52a5dae97accb381f8ac7f5b5c0cf5c58d1045b18ed6cbda20549a1fdb7e5ab0151a1081da1ec798c683e67
-DIST linux-gpib-3.2.20.tar.gz 1254951 SHA256 cde3e77c3fd968e1ee5785abc2d6e09f0f66711fc2612abfc7b05c72c16c2e9a SHA512 679c3895ac5077b3246c43818c7c85ae53597d4a7e70ff2306978472337214952798c41eca9a4ae8be20aa3afa4bc78a7b796fccd6b63a8e1a879fcd144adea9 WHIRLPOOL 653ea123c81ccaf5d55055e70609152584adf36eb6cd0e421f10f5c86d24781e44ced125e9ac417901594c6ac83bed1f7123de27578ad3c841612bb9955eab85
 DIST linux-gpib-3.2.21-ctrl-c.patch.gz 10477 SHA256 697a460ea8515788765983afb5c27ad527e6ab1e75232133c572530643351916 SHA512 4b34ecbc5a3f3170337808397df19b9cf09d3fc8a53052fb560ae7b5336b946c6b1c76ba24b0ad66d4bb5a005902fe8599bb7e981c140a68046b9f14ed5268b3 WHIRLPOOL 5656ed7d4dafeff4b766f247c4f495444d271130cbad8bedaef9b761e14b57c09b46a7ccd5e3be5ff50934f48a88a987eb71f6997aafdcd4adc486c49b2c0c5d
 DIST linux-gpib-3.2.21.tar.gz 1274505 SHA256 31fd86f4897239ffc55e0d4d850586d24d74144b604d6d39fd33dc59d28f7019 SHA512 539f7444e6bcd07d66cabc3abae9d40cdea3a84365bd69a4621149bc11b7b0e9826650d91d2a048d9780fab7db30005b08a4b91c77e7a26e036ed6f5adb6850b WHIRLPOOL 72a9c929d7e3b79c5c954fb6e41c4d9eb450595c6dccc877a3b47851e467e741b191a708ec3c018e4fe576e5677ffec5986970f83c020707bbbd8e2968e43153
 DIST linux-gpib-4.0.2.tar.gz 1233294 SHA256 0a352a168d69ab564a2cc03ce7239370d944d187d6bc187697fb704c6e49d98f SHA512 20e504fa8e72c6c04b7cda70898cf520343d777825dfe976ea7fd11ee6aa4a8337c0badeec6c5c3c0bd20853d831802b0641c018817439677756654295ff65d6 WHIRLPOOL 8abc1afcd7010a6c585ca643c87813ab071b9a26a742d3ae3bb4349af17e16692d9f7d0b2a48c539f4c419108bcfc109e080ddc95fc8b1d28db560eab2544f74

diff --git a/sci-libs/linux-gpib/linux-gpib-3.2.20-r1.ebuild b/sci-libs/linux-gpib/linux-gpib-3.2.20-r1.ebuild
deleted file mode 100644
index 02f8682..0000000
--- a/sci-libs/linux-gpib/linux-gpib-3.2.20-r1.ebuild
+++ /dev/null
@@ -1,183 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=5
-
-PERL_EXPORT_PHASE_FUNCTIONS=no
-GENTOO_DEPEND_ON_PERL=no
-PYTHON_COMPAT=( python2_7 )
-
-inherit eutils linux-mod autotools perl-module python-single-r1 toolchain-funcs udev user
-
-DESCRIPTION="Kernel module and driver library for GPIB (IEEE 488.2) hardware"
-HOMEPAGE="http://linux-gpib.sourceforge.net/"
-SRC_URI="mirror://sourceforge/linux-gpib/${P}.tar.gz
-	firmware? ( http://linux-gpib.sourceforge.net/firmware/gpib_firmware-2006-11-12.tar.gz )"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ~arm ~x86"
-IUSE="isa pcmcia static debug guile perl php python tcl doc firmware"
-
-COMMONDEPEND="
-	tcl? ( dev-lang/tcl:0= )
-	guile? ( dev-scheme/guile:12 )
-	perl? ( dev-lang/perl:= )
-	php? ( dev-lang/php:= )
-	python? ( ${PYTHON_DEPS} )
-	firmware? ( sys-apps/fxload )"
-RDEPEND="${COMMONDEPEND}"
-DEPEND="${COMMONDEPEND}
-	virtual/pkgconfig
-	doc? ( app-text/docbook-sgml-utils )
-	perl? ( virtual/perl-ExtUtils-MakeMaker )"
-
-REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )"
-
-PATCHES=(
-	"${FILESDIR}"/${PN}-3.2.15-build.patch
-	"${FILESDIR}"/${PN}-3.2.16-perl.patch
-	"${FILESDIR}"/${PN}-3.2.16-reallydie.patch
-)
-
-pkg_setup () {
-	use perl && perl_set_version
-	use python && python_setup
-	linux-mod_pkg_setup
-
-	if kernel_is -lt 2 6 8; then
-		die "Kernel versions older than 2.6.8 are not supported."
-	fi
-
-	# https://sourceforge.net/tracker/?func=detail&aid=3285657&group_id=42378&atid=432940
-	if use pcmcia && kernel_is -ge 2 6 38; then
-		die "pcmcia support is broken on kernels newer 2.6.38"
-	fi
-}
-
-src_prepare () {
-	epatch ${PATCHES[@]}
-	epatch_user
-	eautoreconf
-}
-
-src_configure() {
-	set_arch_to_kernel
-	econf \
-		$(use_enable isa) \
-		$(use_enable pcmcia) \
-		$(use_enable static) \
-		$(use_enable debug driver-debug) \
-		$(use_enable guile guile-binding) \
-		$(use_enable perl perl-binding) \
-		$(use_enable php php-binding) \
-		$(use_enable python python-binding) \
-		$(use_enable tcl tcl-binding) \
-		$(use_enable doc documentation) \
-		--with-linux-srcdir=${KV_DIR}
-}
-
-src_compile() {
-	set_arch_to_kernel
-	FIRM_DIR=/usr/share/usb
-	emake \
-		DESTDIR="${D}" \
-		INSTALL_MOD_PATH="${D}" \
-		HOTPLUG_USB_CONF_DIR="${D}"/etc/hotplug/usb \
-		USB_FIRMWARE_DIR="${D}"${FIRM_DIR} \
-		docdir=/usr/share/doc/${PF}/html
-}
-
-src_install() {
-	set_arch_to_kernel
-	FIRM_DIR=/usr/share/usb
-	emake \
-		DESTDIR="${D}" \
-		INSTALL_MOD_PATH="${D}" \
-		HOTPLUG_USB_CONF_DIR="${D}"/etc/hotplug/usb \
-		USB_FIRMWARE_DIR="${D}"${FIRM_DIR} \
-		docdir=/usr/share/doc/${PF}/html install
-
-	if use perl; then
-		einfo "Installing perl module"
-		cd "${S}"/language/perl || die
-		DESTDIR=${D} perl-module_src_install
-		cd "${S}" || die
-	fi
-
-	echo "KERNEL==\"gpib[0-9]*\",	MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules
-	udev_dorules 99-gpib.rules
-
-	dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS
-
-	insinto /etc
-	newins util/templates/gpib.conf gpib.conf
-	newins util/templates/gpib.conf gpib.conf.example
-
-	if use pcmcia; then
-		dodir /etc/pcmcia
-		insinto /etc/pcmcia
-		doins "${S}"/etc/pcmcia/*
-	fi
-
-	if use firmware; then
-		insinto "${FIRM_DIR}"/agilent_82357a
-		doins "${WORKDIR}"/gpib_firmware-2006-11-12/agilent_82357a/*
-
-		insinto "${FIRM_DIR}"/ni_gpib_usb_b
-		doins "${WORKDIR}"/gpib_firmware-2006-11-12/ni_gpib_usb_b/*
-
-		insinto /usr/share/linux-gpib/hp_82341
-		# do not install precompiled generate_firmware
-		doins "${WORKDIR}"/gpib_firmware-2006-11-12/hp_82341/{*.bin,README}
-	fi
-}
-
-pkg_preinst () {
-	linux-mod_pkg_preinst
-	use perl && perl_set_version
-	enewgroup gpib
-}
-
-pkg_postinst () {
-	linux-mod_pkg_postinst
-
-	einfo "You need to run the 'gpib_config' utility to setup the driver before"
-	einfo "you can use it. In order to do it automatically you can add to your"
-	einfo "start script something like this (supposing the appropriate driver"
-	einfo "is loaded on the startup):"
-	einfo "		gpib_config --minor 0"
-	einfo ""
-	einfo "To give a user access to the computer's gpib board you will have to add"
-	einfo "them to the group 'gpib' or, you could change the permissions on the device"
-	einfo "files /dev/gpib[0-15] to something you like better, using 'chmod'."
-	einfo ""
-	einfo "Edit /etc/gpib.conf to match your interface board, and any devices you wish"
-	einfo "to open via ibfind().  See the documentation in /usr/share/linux-gpib/html for"
-	einfo "more information."
-	einfo ""
-
-	if use pcmcia; then
-		einfo "For PCMCIA cards:"
-		einfo "All files needed for a PCMCIA board were copied to /etc/pcmcia."
-		einfo "You may wish to edit the options passed to the gpib_config call in the"
-		einfo "/etc/pcmcia/linux-gpib-pcmcia script."
-		einfo "You may need to send a SIGHUP signal to the cardmgr daemon to force it"
-		einfo "to reload the files in /etc/pcmcia (alternatively you could use your"
-		einfo "pcmcia init.d script to restart the cardmgr, or you could just reboot)."
-		einfo "The driver module will be loaded as needed by the cardmgr."
-		einfo ""
-	fi
-
-	if use firmware; then
-		einfo "For Agilent (HP) 82341C and 82341D cards:"
-		einfo "The firmware for these boards is uploaded by passing the appropriate"
-		einfo "firmware file from /usr/share/linux-gpib/hp_82341 directory to"
-		einfo "gpib_config using the -I or --init-data command line option. Example:"
-		einfo "gpib_config --minor 0 --init-data \\"
-		einfo "/usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin"
-		einfo ""
-	fi
-
-}

diff --git a/sci-libs/linux-gpib/linux-gpib-3.2.21.ebuild b/sci-libs/linux-gpib/linux-gpib-3.2.21.ebuild
deleted file mode 100644
index e00810b..0000000
--- a/sci-libs/linux-gpib/linux-gpib-3.2.21.ebuild
+++ /dev/null
@@ -1,183 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=5
-
-PERL_EXPORT_PHASE_FUNCTIONS=no
-GENTOO_DEPEND_ON_PERL=no
-PYTHON_COMPAT=( python2_7 )
-
-inherit eutils linux-mod autotools perl-module python-single-r1 toolchain-funcs udev user
-
-DESCRIPTION="Kernel module and driver library for GPIB (IEEE 488.2) hardware"
-HOMEPAGE="http://linux-gpib.sourceforge.net/"
-SRC_URI="mirror://sourceforge/linux-gpib/${P}.tar.gz
-	firmware? ( http://linux-gpib.sourceforge.net/firmware/gpib_firmware-2006-11-12.tar.gz )"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ~arm ~x86"
-IUSE="isa pcmcia static debug guile perl php python tcl doc firmware"
-
-COMMONDEPEND="
-	tcl? ( dev-lang/tcl:0= )
-	guile? ( dev-scheme/guile:12 )
-	perl? ( dev-lang/perl:= )
-	php? ( dev-lang/php:= )
-	python? ( ${PYTHON_DEPS} )
-	firmware? ( sys-apps/fxload )"
-RDEPEND="${COMMONDEPEND}"
-DEPEND="${COMMONDEPEND}
-	virtual/pkgconfig
-	doc? ( app-text/docbook-sgml-utils )
-	perl? ( virtual/perl-ExtUtils-MakeMaker )"
-
-REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )"
-
-PATCHES=(
-	"${FILESDIR}"/${PN}-3.2.21-build.patch
-	"${FILESDIR}"/${PN}-3.2.16-perl.patch
-	"${FILESDIR}"/${PN}-3.2.16-reallydie.patch
-)
-
-pkg_setup () {
-	use perl && perl_set_version
-	use python && python_setup
-	linux-mod_pkg_setup
-
-	if kernel_is -lt 2 6 8; then
-		die "Kernel versions older than 2.6.8 are not supported."
-	fi
-
-	# https://sourceforge.net/tracker/?func=detail&aid=3285657&group_id=42378&atid=432940
-	if use pcmcia && kernel_is -ge 2 6 38; then
-		die "pcmcia support is broken on kernels newer 2.6.38"
-	fi
-}
-
-src_prepare () {
-	epatch ${PATCHES[@]}
-	epatch_user
-	eautoreconf
-}
-
-src_configure() {
-	set_arch_to_kernel
-	econf \
-		$(use_enable isa) \
-		$(use_enable pcmcia) \
-		$(use_enable static) \
-		$(use_enable debug driver-debug) \
-		$(use_enable guile guile-binding) \
-		$(use_enable perl perl-binding) \
-		$(use_enable php php-binding) \
-		$(use_enable python python-binding) \
-		$(use_enable tcl tcl-binding) \
-		$(use_enable doc documentation) \
-		--with-linux-srcdir=${KV_DIR}
-}
-
-src_compile() {
-	set_arch_to_kernel
-	FIRM_DIR=/usr/share/usb
-	emake \
-		DESTDIR="${D}" \
-		INSTALL_MOD_PATH="${D}" \
-		HOTPLUG_USB_CONF_DIR="${D}"/etc/hotplug/usb \
-		USB_FIRMWARE_DIR="${D}"${FIRM_DIR} \
-		docdir=/usr/share/doc/${PF}/html
-}
-
-src_install() {
-	set_arch_to_kernel
-	FIRM_DIR=/usr/share/usb
-	emake \
-		DESTDIR="${D}" \
-		INSTALL_MOD_PATH="${D}" \
-		HOTPLUG_USB_CONF_DIR="${D}"/etc/hotplug/usb \
-		USB_FIRMWARE_DIR="${D}"${FIRM_DIR} \
-		docdir=/usr/share/doc/${PF}/html install
-
-	if use perl; then
-		einfo "Installing perl module"
-		cd "${S}"/language/perl || die
-		DESTDIR=${D} perl-module_src_install
-		cd "${S}" || die
-	fi
-
-	echo "KERNEL==\"gpib[0-9]*\",	MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules
-	udev_dorules 99-gpib.rules
-
-	dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS
-
-	insinto /etc
-	newins util/templates/gpib.conf gpib.conf
-	newins util/templates/gpib.conf gpib.conf.example
-
-	if use pcmcia; then
-		dodir /etc/pcmcia
-		insinto /etc/pcmcia
-		doins "${S}"/etc/pcmcia/*
-	fi
-
-	if use firmware; then
-		insinto "${FIRM_DIR}"/agilent_82357a
-		doins "${WORKDIR}"/gpib_firmware-2006-11-12/agilent_82357a/*
-
-		insinto "${FIRM_DIR}"/ni_gpib_usb_b
-		doins "${WORKDIR}"/gpib_firmware-2006-11-12/ni_gpib_usb_b/*
-
-		insinto /usr/share/linux-gpib/hp_82341
-		# do not install precompiled generate_firmware
-		doins "${WORKDIR}"/gpib_firmware-2006-11-12/hp_82341/{*.bin,README}
-	fi
-}
-
-pkg_preinst () {
-	linux-mod_pkg_preinst
-	use perl && perl_set_version
-	enewgroup gpib
-}
-
-pkg_postinst () {
-	linux-mod_pkg_postinst
-
-	einfo "You need to run the 'gpib_config' utility to setup the driver before"
-	einfo "you can use it. In order to do it automatically you can add to your"
-	einfo "start script something like this (supposing the appropriate driver"
-	einfo "is loaded on the startup):"
-	einfo "		gpib_config --minor 0"
-	einfo ""
-	einfo "To give a user access to the computer's gpib board you will have to add"
-	einfo "them to the group 'gpib' or, you could change the permissions on the device"
-	einfo "files /dev/gpib[0-15] to something you like better, using 'chmod'."
-	einfo ""
-	einfo "Edit /etc/gpib.conf to match your interface board, and any devices you wish"
-	einfo "to open via ibfind().  See the documentation in /usr/share/linux-gpib/html for"
-	einfo "more information."
-	einfo ""
-
-	if use pcmcia; then
-		einfo "For PCMCIA cards:"
-		einfo "All files needed for a PCMCIA board were copied to /etc/pcmcia."
-		einfo "You may wish to edit the options passed to the gpib_config call in the"
-		einfo "/etc/pcmcia/linux-gpib-pcmcia script."
-		einfo "You may need to send a SIGHUP signal to the cardmgr daemon to force it"
-		einfo "to reload the files in /etc/pcmcia (alternatively you could use your"
-		einfo "pcmcia init.d script to restart the cardmgr, or you could just reboot)."
-		einfo "The driver module will be loaded as needed by the cardmgr."
-		einfo ""
-	fi
-
-	if use firmware; then
-		einfo "For Agilent (HP) 82341C and 82341D cards:"
-		einfo "The firmware for these boards is uploaded by passing the appropriate"
-		einfo "firmware file from /usr/share/linux-gpib/hp_82341 directory to"
-		einfo "gpib_config using the -I or --init-data command line option. Example:"
-		einfo "gpib_config --minor 0 --init-data \\"
-		einfo "/usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin"
-		einfo ""
-	fi
-
-}