[gentoo-commits] proj/g-sorcery:master commit in: docs/

["Jauhien Piatlicki" <piatlicki@gmail.com>]

commit:     d6896d1dac321ddd19a96be72148a4e27c2567e1
Author:     Jauhien Piatlicki (jauhien) <piatlicki <AT> gmail <DOT> com>
AuthorDate: Fri Sep 20 00:07:45 2013 +0000
Commit:     Jauhien Piatlicki <piatlicki <AT> gmail <DOT> com>
CommitDate: Fri Sep 20 00:07:45 2013 +0000
URL:        http://git.overlays.gentoo.org/gitweb/?p=proj/g-sorcery.git;a=commit;h=d6896d1d

docs: fixes

---
 docs/Makefile                 |  2 +-
 docs/gs-ctan.8                |  4 ++--
 docs/gs-ctan.8.rst            |  4 ++--
 docs/gs-elpa.8                |  4 ++--
 docs/gs-elpa.8.rst            |  4 ++--
 docs/{gs-ctan.8 => gs-pypi.8} | 46 +++++++++++++++++++++----------------------
 docs/gs-pypi.8.rst            |  4 ++--
 7 files changed, 34 insertions(+), 34 deletions(-)

diff --git a/docs/Makefile b/docs/Makefile
index b876790..cba7bc8 100644
--- a/docs/Makefile
+++ b/docs/Makefile
@@ -1,7 +1,7 @@
 HTML_SOURCES=developer_instructions
 HTML_DOCS=$(HTML_SOURCES:=.html)
 
-MAN_SOURCES=g-sorcery g-sorcery.cfg gs-elpa gs-ctan
+MAN_SOURCES=g-sorcery g-sorcery.cfg gs-elpa gs-pypi gs-ctan
 MANS=$(MAN_SOURCES:=.8)
 
 RST2HTML=rst2html.py

diff --git a/docs/gs-ctan.8 b/docs/gs-ctan.8
index 23c93b2..8c456be 100644
--- a/docs/gs-ctan.8
+++ b/docs/gs-ctan.8
@@ -52,8 +52,8 @@ There are two ways of using \fBgs\-ctan\fP:
 .IP \(bu 2
 use it with \fBlayman\fP
 .sp
-In this case all you need to do is install \fBlayman\-9999\fP, \fBg\-sorcery\fP
-and \fBgs\-ctan\fP. Then you should just run \fIlayman \-L\fP as
+In this case all you need to do is install \fBlayman\-9999\fP and \fBg\-sorcery\fP.
+Then you should just run \fIlayman \-L\fP as
 root and find an overlay you want. Type of overlay will be
 displayed as \fIg\-sorcery\fP. Then you add this overlay as
 usual. It\(aqs all you need to do and it\(aqs the recommended way of

diff --git a/docs/gs-ctan.8.rst b/docs/gs-ctan.8.rst
index 578b519..348617e 100644
--- a/docs/gs-ctan.8.rst
+++ b/docs/gs-ctan.8.rst
@@ -38,8 +38,8 @@ There are two ways of using **gs-ctan**:
 
     * use it with **layman**
 
-      In this case all you need to do is install **layman-9999**, **g-sorcery**
-      and **gs-ctan**. Then you should just run `layman -L` as
+      In this case all you need to do is install **layman-9999** and **g-sorcery**.
+      Then you should just run `layman -L` as
       root and find an overlay you want. Type of overlay will be
       displayed as *g-sorcery*. Then you add this overlay as
       usual. It's all you need to do and it's the recommended way of

diff --git a/docs/gs-elpa.8 b/docs/gs-elpa.8
index a1ba281..cd71794 100644
--- a/docs/gs-elpa.8
+++ b/docs/gs-elpa.8
@@ -53,8 +53,8 @@ There are two ways of using \fBgs\-elpa\fP:
 .IP \(bu 2
 use it with \fBlayman\fP
 .sp
-In this case all you need to do is install \fBlayman\-9999\fP, \fBg\-sorcery\fP
-and \fBgs\-elpa\fP. Then you should just run \fIlayman \-L\fP as
+In this case all you need to do is install \fBlayman\-9999\fP and \fBg\-sorcery\fP.
+Then you should just run \fIlayman \-L\fP as
 root and find an overlay you want. Type of overlay will be
 displayed as \fIg\-sorcery\fP. Then you add this overlay as
 usual. It\(aqs all you need to do and it\(aqs the recommended way of

diff --git a/docs/gs-elpa.8.rst b/docs/gs-elpa.8.rst
index 7c718fa..008c30e 100644
--- a/docs/gs-elpa.8.rst
+++ b/docs/gs-elpa.8.rst
@@ -39,8 +39,8 @@ There are two ways of using **gs-elpa**:
 
     * use it with **layman**
 
-      In this case all you need to do is install **layman-9999**, **g-sorcery**
-      and **gs-elpa**. Then you should just run `layman -L` as
+      In this case all you need to do is install **layman-9999** and **g-sorcery**.
+      Then you should just run `layman -L` as
       root and find an overlay you want. Type of overlay will be
       displayed as *g-sorcery*. Then you add this overlay as
       usual. It's all you need to do and it's the recommended way of

diff --git a/docs/gs-ctan.8 b/docs/gs-pypi.8
similarity index 71%
copy from docs/gs-ctan.8
copy to docs/gs-pypi.8
index 23c93b2..633de7d 100644
--- a/docs/gs-ctan.8
+++ b/docs/gs-pypi.8
@@ -1,8 +1,8 @@
 .\" Man page generated from reStructuredText.
 .
-.TH GS-CTAN 8 "2013-08-04" "0.1" "g-sorcery"
+.TH GS-PYPI 8 "2013-08-04" "0.1" "g-sorcery"
 .SH NAME
-gs-ctan \- manage overlays for CTAN repository
+gs-pypi \- manage overlays for PYPI repository
 .
 .nr rst2man-indent-level 0
 .
@@ -32,37 +32,37 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 ..
 .SH SYNOPSIS
 .sp
-\fBgs\-ctan\fP \fB\-o\fP \fIOVERLAY\fP [\fB\-r\fP \fIREPO\fP] \fBsync\fP
+\fBgs\-pypi\fP \fB\-o\fP \fIOVERLAY\fP [\fB\-r\fP \fIREPO\fP] \fBsync\fP
 .sp
-\fBgs\-ctan\fP \fB\-o\fP \fIOVERLAY\fP [\fB\-r\fP \fIREPO\fP] \fBlist\fP
+\fBgs\-pypi\fP \fB\-o\fP \fIOVERLAY\fP [\fB\-r\fP \fIREPO\fP] \fBlist\fP
 .sp
-\fBgs\-ctan\fP \fB\-o\fP \fIOVERLAY\fP [\fB\-r\fP \fIREPO\fP] \fBgenerate\fP \fIPACKAGE\fP
+\fBgs\-pypi\fP \fB\-o\fP \fIOVERLAY\fP [\fB\-r\fP \fIREPO\fP] \fBgenerate\fP \fIPACKAGE\fP
 .sp
-\fBgs\-ctan\fP \fB\-o\fP \fIOVERLAY\fP [\fB\-r\fP \fIREPO\fP] \fBinstall\fP \fIPACKAGE\fP
+\fBgs\-pypi\fP \fB\-o\fP \fIOVERLAY\fP [\fB\-r\fP \fIREPO\fP] \fBinstall\fP \fIPACKAGE\fP
 .sp
-\fBgs\-ctan\fP \fB\-o\fP \fIOVERLAY\fP [\fB\-r\fP \fIREPO\fP] \fBgenerate\-tree\fP [\fB\-d\fP]
+\fBgs\-pypi\fP \fB\-o\fP \fIOVERLAY\fP [\fB\-r\fP \fIREPO\fP] \fBgenerate\-tree\fP [\fB\-d\fP]
 .SH DESCRIPTION
 .sp
-\fBgs\-ctan\fP is an ebuild generator for CTAN TEXLIVE repository.
+\fBgs\-pypi\fP is an ebuild generator for PYPI PYTHON repository.
 .sp
-There are two ways of using \fBgs\-ctan\fP:
+There are two ways of using \fBgs\-pypi\fP:
 .INDENT 0.0
 .INDENT 3.5
 .INDENT 0.0
 .IP \(bu 2
 use it with \fBlayman\fP
 .sp
-In this case all you need to do is install \fBlayman\-9999\fP, \fBg\-sorcery\fP
-and \fBgs\-ctan\fP. Then you should just run \fIlayman \-L\fP as
+In this case all you need to do is install \fBlayman\-9999\fP and \fBg\-sorcery\fP.
+Then you should just run \fIlayman \-L\fP as
 root and find an overlay you want. Type of overlay will be
 displayed as \fIg\-sorcery\fP. Then you add this overlay as
 usual. It\(aqs all you need to do and it\(aqs the recommended way of
-using \fBgs\-ctan\fP.
+using \fBgs\-pypi\fP.
 .IP \(bu 2
 use it as stand\-alone tool
 .sp
 In this case you should create an overlay (see \fBportage\fP documentation), sync it and populate
-it with one or more ebuilds. Then ebuilds could be installed by emerge or by \fBgs\-ctan\fP tool.
+it with one or more ebuilds. Then ebuilds could be installed by emerge or by \fBgs\-pypi\fP tool.
 .UNINDENT
 .UNINDENT
 .UNINDENT
@@ -99,38 +99,38 @@ are no entries for them in Manifest files.
 .SH FILES
 .INDENT 0.0
 .TP
-.B \fB/etc/g\-sorcery/gs\-ctan.json\fP
+.B \fB/etc/g\-sorcery/gs\-pypi.json\fP
 Backend config.
 .TP
-.B \fB/etc/layman/overlays/gs\-ctan\-overlays.xml\fP
+.B \fB/etc/layman/overlays/gs\-pypi\-overlays.xml\fP
 List of available repositories.
 .UNINDENT
 .SH EXAMPLES
 .INDENT 0.0
 .TP
-.B Using gs\-ctan with layman
+.B Using gs\-pypi with layman
 Execute
 .sp
 \fBlayman \-L\fP
 .sp
-If you see there a \fBctan\fP overlay then anything should work.
+If you see there a \fBpypi\fP overlay then anything should work.
 .sp
-\fBlayman \-a ctan\fP
+\fBlayman \-a pypi\fP
 .sp
 Emerge any package from it using \fBemerge\fP.
 .TP
 .B Generating user ebuilds in user overlay
 Create new user overlay. Run
 .sp
-\fBgs\-ctan \-o\fP \fIOVERLAY_DIRECTORY\fP \fB\-r ctan\fP \fBsync\fP
+\fBgs\-pypi \-o\fP \fIOVERLAY_DIRECTORY\fP \fB\-r ctan\fP \fBsync\fP
 .sp
 List packages:
 .sp
-\fBgs\-ctan \-o\fP \fIOVERLAY_DIRECTORY\fP \fB\-r ctan\fP \fBlist\fP
+\fBgs\-pypi \-o\fP \fIOVERLAY_DIRECTORY\fP \fB\-r ctan\fP \fBlist\fP
 .sp
 Install any package you want:
 .sp
-\fBgs\-ctan \-o\fP \fIOVERLAY_DIRECTORY\fP \fB\-r ctan\fP \fBinstall\fP \fIPACKAGE\fP
+\fBgs\-pypi \-o\fP \fIOVERLAY_DIRECTORY\fP \fB\-r ctan\fP \fBinstall\fP \fIPACKAGE\fP
 .sp
 Note, that if you call \fBgenerate\-tree\fP command your overlay
 will be wiped and overlay tree for a given repository will be generated. Be careful!
@@ -138,11 +138,11 @@ will be wiped and overlay tree for a given repository will be generated. Be care
 .SH NOTES
 .INDENT 0.0
 .IP 1. 3
-At the moment the only package mangler \fBgs\-ctan\fP supports is \fBportage\fP.
+At the moment the only package mangler \fBgs\-pypi\fP supports is \fBportage\fP.
 .UNINDENT
 .SH SEE ALSO
 .sp
-\fBgs\-pypi\fP(8), \fBgs\-elpa\fP(8), \fBg\-sorcery.cfg\fP(8), \fBportage\fP(5), \fBemerge\fP(1), \fBlayman\fP(8)
+\fBgs\-elpa\fP(8), \fBgs\-ctan\fP(8), \fBg\-sorcery.cfg\fP(8), \fBportage\fP(5), \fBemerge\fP(1), \fBlayman\fP(8)
 .SH AUTHOR
 Written by Jauhien Piatlicki <piatlicki@gmail.com>. GSoC idea
 and mentorship by Rafael Martins. Lots of help and improvements

diff --git a/docs/gs-pypi.8.rst b/docs/gs-pypi.8.rst
index 560a94c..d5c7c07 100644
--- a/docs/gs-pypi.8.rst
+++ b/docs/gs-pypi.8.rst
@@ -38,8 +38,8 @@ There are two ways of using **gs-pypi**:
 
     * use it with **layman**
 
-      In this case all you need to do is install **layman-9999**, **g-sorcery**
-      and **gs-pypi**. Then you should just run `layman -L` as
+      In this case all you need to do is install **layman-9999** and **g-sorcery**.
+      Then you should just run `layman -L` as
       root and find an overlay you want. Type of overlay will be
       displayed as *g-sorcery*. Then you add this overlay as
       usual. It's all you need to do and it's the recommended way of