From: "Michael Weber" <xmw@gentoo.org>
To: gentoo-commits@lists.gentoo.org
Subject: [gentoo-commits] dev/xmw:master commit in: sys-boot/raspberrypi-loader/files/, sys-boot/raspberrypi-loader/
Date: Wed, 10 Jul 2013 23:15:14 +0000 (UTC) [thread overview]
Message-ID: <1373498060.15c430276109c196c5225bc44aaaafd4d1f6eb55.xmw@gentoo> (raw)
commit: 15c430276109c196c5225bc44aaaafd4d1f6eb55
Author: Michael Weber <xmw <AT> gentoo <DOT> org>
AuthorDate: Wed Jul 10 23:14:20 2013 +0000
Commit: Michael Weber <xmw <AT> gentoo <DOT> org>
CommitDate: Wed Jul 10 23:14:20 2013 +0000
URL: http://git.overlays.gentoo.org/gitweb/?p=dev/xmw.git;a=commit;h=15c43027
Version bump, include proper config.txt and cmdline.txt templates, CONFIG_PROTECT.
Package-Manager: portage-2.2.0_alpha187
Manifest-Sign-Key: 62EEF090
---
sys-boot/raspberrypi-loader/ChangeLog | 13 +++-
sys-boot/raspberrypi-loader/Manifest | 9 +--
.../raspberrypi-loader-0_p20130705-cmdline.txt | 1 +
.../raspberrypi-loader-0_p20130705-config.txt | 81 ++++++++++++++++++++++
.../files/raspberrypi-loader-0_p20130705-envd | 2 +
.../raspberrypi-loader-0_p20130705.ebuild | 34 +++++++++
6 files changed, 134 insertions(+), 6 deletions(-)
diff --git a/sys-boot/raspberrypi-loader/ChangeLog b/sys-boot/raspberrypi-loader/ChangeLog
index 70a65ce..5088848 100644
--- a/sys-boot/raspberrypi-loader/ChangeLog
+++ b/sys-boot/raspberrypi-loader/ChangeLog
@@ -1,7 +1,17 @@
# ChangeLog for sys-boot/raspberrypi-loader
-# Copyright 1999-2012 Gentoo Foundation; Distributed under the GPL v2
+# Copyright 1999-2013 Gentoo Foundation; Distributed under the GPL v2
# $Header: $
+*raspberrypi-loader-0_p20130705 (10 Jul 2013)
+
+ 10 Jul 2013; Michael Weber <xmw@gentoo.org>
+ +files/raspberrypi-loader-0_p20130705-cmdline.txt,
+ +files/raspberrypi-loader-0_p20130705-config.txt,
+ +files/raspberrypi-loader-0_p20130705-envd,
+ +raspberrypi-loader-0_p20130705.ebuild:
+ Version bump, include proper config.txt and cmdline.txt templates,
+ CONFIG_PROTECT.
+
*raspberrypi-loader-0_p20121105 (07 Nov 2012)
07 Nov 2012; Michael Weber <xmw@gentoo.org>
@@ -19,4 +29,3 @@
18 Jun 2012; Michael Weber <xmw@gentoo.org> +rbpi-loader-0_p20120617.ebuild,
+metadata.xml:
Initial import
-
diff --git a/sys-boot/raspberrypi-loader/Manifest b/sys-boot/raspberrypi-loader/Manifest
index 83b8f99..235fad1 100644
--- a/sys-boot/raspberrypi-loader/Manifest
+++ b/sys-boot/raspberrypi-loader/Manifest
@@ -3,10 +3,11 @@ Hash: SHA256
DIST raspberrypi-loader-0_p20120722.tar.xz 1110444 SHA256 5a43ebbfcc71990d82b6a44552cb16770f907ec5a7f10e16defb4de9d96afe2f SHA512 e1452234a9ff79684d12969359948e6e406709691d53d1d107477c9b7532837761cf5da65cceb7d176aee4bbfe9a559829289e2a7e41ef28136e3a12943452a0 WHIRLPOOL 9f429db9e216495d85554162679ed17446b46fef9c0cd6bead1df1e9401baf75f1deb36870cadec166dd31554dcc75073b7dc310c573a3a5740c934db6551239
DIST raspberrypi-loader-0_p20121105.tar.xz 1262432 SHA256 99f8a50e8de5edd5c232f2926434cf89628028225c5e68476c978bead1592374 SHA512 a3ce2f9f4890db308543513060e43aa7254086d96465b79e5ee8310fe3aa4ba32975025ad381b24d28b0962f0505561d34a175915bc93d81a0c8c2c10dada2d1 WHIRLPOOL 356c804636574de714f0da893ada7ff2edb8792bd1f81e659a2fb165bc74a5b94512a80ef2aa665c171fbd7d3d0c3eeadc1fcacc126f127e3dcb1feb96b5a8f9
+DIST raspberrypi-loader-0_p20130705.tar.xz 2032392 SHA256 1e2d9dd73d4981c8cda6b668f4ceb7eec84377da7181ba0e73c3a2e1834fa80b SHA512 712b3416dfa62b7e433d0118a201ae00196afaebdca32c35db4888170dc680527e88771bd3f72871add68cae30bfba8f2e4ba509a1f8c616a630886fc951a8e6 WHIRLPOOL f5b80d4c93b7e04b2f81c779286406bbdce8d9824a7efc8acde77337077f2bd4803d6cd7501f379aade5e75847527596f15b91900c6124e0636cc0a3b663dcd2
-----BEGIN PGP SIGNATURE-----
-Version: GnuPG v2.0.19 (GNU/Linux)
+Version: GnuPG v2.0.20 (GNU/Linux)
-iF4EAREIAAYFAlCa0GcACgkQknrdDGLu8JD3mAD+NzLXHWBwKfaKmC3ggK5Hgxi5
-u9qwOIYK36SsBeepNuUA/2duW6cAgIngtdiAk29fNKyQprL7qlxEg3IP5FyEj6BC
-=TitM
+iF4EAREIAAYFAlHd6swACgkQknrdDGLu8JCkOQD+N9uktQXKW8VY+YQeqXu9rgKN
+iBLMKDjL8NTPgfJTJcoA/0+lNdyENtamaxgF+axr1XDt4Jp24lTrpw2hDzxHETJ9
+=lg47
-----END PGP SIGNATURE-----
diff --git a/sys-boot/raspberrypi-loader/files/raspberrypi-loader-0_p20130705-cmdline.txt b/sys-boot/raspberrypi-loader/files/raspberrypi-loader-0_p20130705-cmdline.txt
new file mode 100755
index 0000000..39112a2
--- /dev/null
+++ b/sys-boot/raspberrypi-loader/files/raspberrypi-loader-0_p20130705-cmdline.txt
@@ -0,0 +1 @@
+ipv6.disable=0 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=noop rootwait
diff --git a/sys-boot/raspberrypi-loader/files/raspberrypi-loader-0_p20130705-config.txt b/sys-boot/raspberrypi-loader/files/raspberrypi-loader-0_p20130705-config.txt
new file mode 100755
index 0000000..9401530
--- /dev/null
+++ b/sys-boot/raspberrypi-loader/files/raspberrypi-loader-0_p20130705-config.txt
@@ -0,0 +1,81 @@
+#from archlinux arm sdcard image
+# uncomment if you get no picture on HDMI for a default "safe" mode
+#hdmi_safe=1
+
+# uncomment this if your display has a black border of unused pixels visible
+# and your display can output without overscan
+#disable_overscan=1
+
+# uncomment the following to adjust overscan. Use positive numbers if console
+# goes off screen, and negative if there is too much border
+#overscan_left=16
+#overscan_right=16
+#overscan_top=16
+#overscan_bottom=16
+
+# uncomment to force a console size. By default it will be display's size minus
+# overscan.
+#framebuffer_width=1280
+#framebuffer_height=720
+
+# uncomment if hdmi display is not detected and composite is being output
+#hdmi_force_hotplug=1
+
+# uncomment to force a specific HDMI mode (this will force VGA)
+#hdmi_group=1
+#hdmi_mode=1
+
+# uncomment to force a HDMI mode rather than DVI. This can make audio work in
+# DMT (computer monitor) modes
+#hdmi_drive=2
+
+# uncomment to increase signal to HDMI, if you have interference, blanking, or
+# no display
+#config_hdmi_boost=4
+
+# uncomment for composite PAL
+#sdtv_mode=2
+
+#uncomment to overclock the arm. 700 MHz is the default.
+#arm_freq=800
+
+# for more options see http://elinux.org/RPi_config.txt
+
+## Some over clocking settings, govenor already set to ondemand
+
+##None
+#arm_freq=700
+#core_freq=250
+#sdram_freq=400
+#over_voltage=0
+
+##Modest
+#arm_freq=800
+#core_freq=300
+#sdram_freq=400
+#over_voltage=0
+
+##Medium
+#arm_freq=900
+#core_freq=333
+#sdram_freq=450
+#over_voltage=2
+
+##High
+#arm_freq=950
+#core_freq=450
+#sdram_freq=450
+#over_voltage=6
+
+##Turbo
+#arm_freq=1000
+#core_freq=500
+#sdram_freq=500
+#over_voltage=6
+
+gpu_mem_512=316
+gpu_mem_256=128
+cma_lwm=16
+cma_hwm=32
+cma_offline_start=16
+
diff --git a/sys-boot/raspberrypi-loader/files/raspberrypi-loader-0_p20130705-envd b/sys-boot/raspberrypi-loader/files/raspberrypi-loader-0_p20130705-envd
new file mode 100644
index 0000000..22ed093
--- /dev/null
+++ b/sys-boot/raspberrypi-loader/files/raspberrypi-loader-0_p20130705-envd
@@ -0,0 +1,2 @@
+CONFIG_PROTECT="/boot/config.txt /boot/cmdline.txt"
+
diff --git a/sys-boot/raspberrypi-loader/raspberrypi-loader-0_p20130705.ebuild b/sys-boot/raspberrypi-loader/raspberrypi-loader-0_p20130705.ebuild
new file mode 100644
index 0000000..2e1d79e
--- /dev/null
+++ b/sys-boot/raspberrypi-loader/raspberrypi-loader-0_p20130705.ebuild
@@ -0,0 +1,34 @@
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: $
+
+EAPI=5
+
+inherit readme.gentoo
+
+DESCRIPTION="Raspberry PI boot loader and firmware"
+HOMEPAGE="https://github.com/raspberrypi/firmware"
+#created with https://github.com/xmw/gentoo-raspberrypi-tools
+SRC_URI="http://xmw.de/mirror/raspberrypi-firmware/${P}.tar.xz"
+
+LICENSE="GPL-2 raspberrypi-videocore-bin"
+SLOT="0"
+KEYWORDS="~arm -*"
+IUSE=""
+
+S=${WORKDIR}
+
+QA_PRESTRIPPED="boot/start.elf
+ boot/start_cd.elf
+ boot/start_x.elf"
+
+src_install() {
+ insinto /boot
+ doins boot/*
+ newins "${FILESDIR}"/${P}-config.txt config.txt
+ newins "${FILESDIR}"/${P}-cmdline.txt cmdline.txt
+ newenvd "${FILESDIR}"/${P}-envd 90${PN}
+ readme.gentoo_create_doc
+}
+
+DOC_CONTENTS="Please configure your ram setup by editing /boot/config.txt"
next reply other threads:[~2013-07-10 23:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-10 23:15 Michael Weber [this message]
-- strict thread matches above, loose matches on Subject: below --
2013-07-17 19:19 [gentoo-commits] dev/xmw:master commit in: sys-boot/raspberrypi-loader/files/, sys-boot/raspberrypi-loader/ Michael Weber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1373498060.15c430276109c196c5225bc44aaaafd4d1f6eb55.xmw@gentoo \
--to=xmw@gentoo.org \
--cc=gentoo-commits@lists.gentoo.org \
--cc=gentoo-dev@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox