[gentoo-catalyst] livecd + gensplash

[gentoo-catalyst] livecd + gensplash

[martin nicolas]

Hi,

I've try a lot to make working a livecd with gensplash but without
result, what did I do wrong ?
I use gentoo-dev-sources-2.6.10-r6, I've put the right options in my
/etc/kernels/kernel-config-x86-2.6.10-gentoo-r6 (so I think that it's
right) that's to say :

[*] Support for frame buffer devices                                            
                     [*]   Enable Video Mode Handling Helpers 

<*>   VESA VGA graphics support                                                 
                             VESA driver type (vesafb)  --->         

[*] Support for the framebuffer splash


 --- VGA text console                                                      
                          [*]   Video mode selection support
                          <M> MDA text console (dual-headed)
(EXPERIMENTAL)
                         <*> Framebuffer Console support
                          [ ]   Select compiled-in fonts   


and the rignt options for the initrd.

What did I do wrong?
--
gentoo-catalyst@gentoo.org mailing list

Re: [gentoo-catalyst] livecd + gensplash

[Chris Gianelloni]

[-- Attachment #1: Type: text/plain, Size: 505 bytes --]

On Sat, 2005-01-29 at 22:06 +0100, martin nicolas wrote:
> I've try a lot to make working a livecd with gensplash but without
> result, what did I do wrong ?

gensplash support is shoddy at best with catalyst... which version of
catalyst was this?  if it wasn't 1.1.4, then upgrade...

Also... what do you have for livecd/splash_type and livecd/splash_theme
in your livecd-stage2.spec file?
-- 
Chris Gianelloni
Release Engineering - Strategic Lead/QA Manager
Games - Developer
Gentoo Linux

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-catalyst] livecd + gensplash

[martin nicolas]

On Sat, 29 Jan 2005 16:25:41 -0500, Chris Gianelloni
<wolf31o2@gentoo.org> wrote:
> On Sat, 2005-01-29 at 22:06 +0100, martin nicolas wrote:
> > I've try a lot to make working a livecd with gensplash but without
> > result, what did I do wrong ?
> 
> gensplash support is shoddy at best with catalyst... which version of
> catalyst was this?  if it wasn't 1.1.4, then upgrade...

so I've upgrade to 1.1.4 but there are some problems and I can't build
the livecd stage1

> 
> Also... what do you have for livecd/splash_type and livecd/splash_theme
> in your livecd-stage2.spec file?

(before upgrading) In my spec file, I've put gensplash for
livecd/splash_type, have copy my gentoo splash (Gentoo-hornet) to
/etc/saplsh of my gentoo livecd stage1 witch is my base for building
my livecd stage2 (So it's also my livecd/splash_theme).

> --
> Chris Gianelloni
> Release Engineering - Strategic Lead/QA Manager
> Games - Developer
> Gentoo Linux
> 
> 
>
--
gentoo-catalyst@gentoo.org mailing list

Re: [gentoo-catalyst] livecd + gensplash

[Robert Paskowitz]

[-- Attachment #1: Type: text/plain, Size: 670 bytes --]

> > > I've try a lot to make working a livecd with gensplash but without
> > > result, what did I do wrong ?
> > 
> > gensplash support is shoddy at best with catalyst... which version of
> > catalyst was this?  if it wasn't 1.1.4, then upgrade...
> 
> so I've upgrade to 1.1.4 but there are some problems and I can't build
> the livecd stage1

This is due to the gconfd-2 problem mentioned earlier. To the best of my
understanding, 1.1.5 will be out shortly fixing this. In the mean time,
you can open up
vim /usr/lib/catalyst/targets/livecd-stage1/livecd-stage1.sh and comment
out the three lines below(and not including) "killall -9 gconfd-2"

Robert

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-catalyst] livecd + gensplash

[Chris Gianelloni]

[-- Attachment #1: Type: text/plain, Size: 969 bytes --]

On Sun, 2005-01-30 at 01:01 +0100, martin nicolas wrote:
> > gensplash support is shoddy at best with catalyst... which version of
> > catalyst was this?  if it wasn't 1.1.4, then upgrade...
> 
> so I've upgrade to 1.1.4 but there are some problems and I can't build
> the livecd stage1

Well, you'll have to be specific, or else we won't be able to help you.

> > Also... what do you have for livecd/splash_type and livecd/splash_theme
> > in your livecd-stage2.spec file?
> 
> (before upgrading) In my spec file, I've put gensplash for
> livecd/splash_type, have copy my gentoo splash (Gentoo-hornet) to
> /etc/saplsh of my gentoo livecd stage1 witch is my base for building
> my livecd stage2 (So it's also my livecd/splash_theme).

Where are you loading splashutils?  Are you calling it from boot/kernel
$kname/postconfi in livecd-stage2?

-- 
Chris Gianelloni
Release Engineering - Strategic Lead/QA Manager
Games - Developer
Gentoo Linux

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-catalyst] livecd + gensplash

[martin nicolas]

Yes, it's sure that I've to be more clear explaining my problems.

So, I've updated to catalyst 1.1.5 now the livecd stage 1 & 2 works
fine but the iso isn't generated ?
why ? can I made it manualy and how ?

In the end of my livecd stage2 generation I've this : 
Creating zisofs...
livecd-stage2: complete!

So I supposed that there are no problems but I've the line
"livecd/iso: /tmp/gentoo.iso" in my livecd-stage2.spec but in the end
no iso in my /tmp directory.

Thanks for the work, it's really really great.


On Sat, 29 Jan 2005 19:35:34 -0500, Chris Gianelloni
<wolf31o2@gentoo.org> wrote:
> On Sun, 2005-01-30 at 01:01 +0100, martin nicolas wrote:
> > > gensplash support is shoddy at best with catalyst... which version of
> > > catalyst was this?  if it wasn't 1.1.4, then upgrade...
> >
> > so I've upgrade to 1.1.4 but there are some problems and I can't build
> > the livecd stage1
> 
> Well, you'll have to be specific, or else we won't be able to help you.
> 
> > > Also... what do you have for livecd/splash_type and livecd/splash_theme
> > > in your livecd-stage2.spec file?
> >
> > (before upgrading) In my spec file, I've put gensplash for
> > livecd/splash_type, have copy my gentoo splash (Gentoo-hornet) to
> > /etc/saplsh of my gentoo livecd stage1 witch is my base for building
> > my livecd stage2 (So it's also my livecd/splash_theme).
> 
> Where are you loading splashutils?  Are you calling it from boot/kernel
> $kname/postconfi in livecd-stage2?
> 
> --
> Chris Gianelloni
> Release Engineering - Strategic Lead/QA Manager
> Games - Developer
> Gentoo Linux
> 
> 
>
--
gentoo-catalyst@gentoo.org mailing list

Re: [gentoo-catalyst] livecd + gensplash

[Chris Gianelloni]

[-- Attachment #1: Type: text/plain, Size: 842 bytes --]

On Sun, 2005-01-30 at 11:42 +0100, martin nicolas wrote:
> Yes, it's sure that I've to be more clear explaining my problems.
> 
> So, I've updated to catalyst 1.1.5 now the livecd stage 1 & 2 works
> fine but the iso isn't generated ?
> why ? can I made it manualy and how ?
> 
> In the end of my livecd stage2 generation I've this : 
> Creating zisofs...
> livecd-stage2: complete!

Did you emerge catalyst with the cdr USE flag?  If not, then you'll need
to install zisofs-tools onto your system.

> So I supposed that there are no problems but I've the line
> "livecd/iso: /tmp/gentoo.iso" in my livecd-stage2.spec but in the end
> no iso in my /tmp directory.
> 
> Thanks for the work, it's really really great.

-- 
Chris Gianelloni
Release Engineering - Strategic Lead/QA Manager
Games - Developer
Gentoo Linux

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-catalyst] livecd + gensplash

[martin nicolas]

On Sun, 30 Jan 2005 09:05:42 -0500, Chris Gianelloni
<wolf31o2@gentoo.org> wrote:
> On Sun, 2005-01-30 at 11:42 +0100, martin nicolas wrote:
> > Yes, it's sure that I've to be more clear explaining my problems.
> >
> > So, I've updated to catalyst 1.1.5 now the livecd stage 1 & 2 works
> > fine but the iso isn't generated ?
> > why ? can I made it manualy and how ?
> >
> > In the end of my livecd stage2 generation I've this :
> > Creating zisofs...
> > livecd-stage2: complete!
> 
> Did you emerge catalyst with the cdr USE flag?  If not, then you'll need
> to install zisofs-tools onto your system.
> 

I've reemerged catalyst with cdr in USE flag then I've redo the
command catalyst - f livecd-stage2.spec but although I've the option
livecd/iso: /tmp/gentoo.iso, at the end of the catalyst process I've
no gentoo.iso in my /tmp dir.

Any idea ?

Thanks

> > So I supposed that there are no problems but I've the line
> > "livecd/iso: /tmp/gentoo.iso" in my livecd-stage2.spec but in the end
> > no iso in my /tmp directory.
> >
> > Thanks for the work, it's really really great.
> 
> --
> Chris Gianelloni
> Release Engineering - Strategic Lead/QA Manager
> Games - Developer
> Gentoo Linux
> 
> 
>
--
gentoo-catalyst@gentoo.org mailing list

Re: [gentoo-catalyst] livecd + gensplash

[Julien Cayzac]

Could you post your spec files (and maybe your fsscript and other
script files) on the mailing list?
It's always good to see some working livecd setups...
Julien


On Sun, 30 Jan 2005 16:14:28 +0100, martin nicolas
<nicko.martin@gmail.com> wrote:
> On Sun, 30 Jan 2005 09:05:42 -0500, Chris Gianelloni
> <wolf31o2@gentoo.org> wrote:
> > On Sun, 2005-01-30 at 11:42 +0100, martin nicolas wrote:
> > > Yes, it's sure that I've to be more clear explaining my problems.
> > >
> > > So, I've updated to catalyst 1.1.5 now the livecd stage 1 & 2 works
> > > fine but the iso isn't generated ?
> > > why ? can I made it manualy and how ?
> > >
> > > In the end of my livecd stage2 generation I've this :
> > > Creating zisofs...
> > > livecd-stage2: complete!
> >
> > Did you emerge catalyst with the cdr USE flag?  If not, then you'll need
> > to install zisofs-tools onto your system.
> >
> 
> I've reemerged catalyst with cdr in USE flag then I've redo the
> command catalyst - f livecd-stage2.spec but although I've the option
> livecd/iso: /tmp/gentoo.iso, at the end of the catalyst process I've
> no gentoo.iso in my /tmp dir.
> 
> Any idea ?
> 
> Thanks
> 
> > > So I supposed that there are no problems but I've the line
> > > "livecd/iso: /tmp/gentoo.iso" in my livecd-stage2.spec but in the end
> > > no iso in my /tmp directory.
> > >
> > > Thanks for the work, it's really really great.
> >
> > --
> > Chris Gianelloni
> > Release Engineering - Strategic Lead/QA Manager
> > Games - Developer
> > Gentoo Linux
> >
> >
> >
> --
> gentoo-catalyst@gentoo.org mailing list
> 
>
--
gentoo-catalyst@gentoo.org mailing list

Re: [gentoo-catalyst] livecd + gensplash

[martin nicolas]

[-- Attachment #1: Type: text/plain, Size: 2057 bytes --]

Yes, of course, here is my spec files for the livecd stages 1 and 2
(see in attachments).

What are you intend in "fsscript" ?

I add that before the version 1.1.4 this scripts were working fine but
I've upgraded to 1.1.5 for having gensplash.


On Sun, 30 Jan 2005 19:06:07 +0100, Julien Cayzac
<julien.cayzac@gmail.com> wrote:
> Could you post your spec files (and maybe your fsscript and other
> script files) on the mailing list?
> It's always good to see some working livecd setups...
> Julien
> 
> On Sun, 30 Jan 2005 16:14:28 +0100, martin nicolas
> <nicko.martin@gmail.com> wrote:
> > On Sun, 30 Jan 2005 09:05:42 -0500, Chris Gianelloni
> > <wolf31o2@gentoo.org> wrote:
> > > On Sun, 2005-01-30 at 11:42 +0100, martin nicolas wrote:
> > > > Yes, it's sure that I've to be more clear explaining my problems.
> > > >
> > > > So, I've updated to catalyst 1.1.5 now the livecd stage 1 & 2 works
> > > > fine but the iso isn't generated ?
> > > > why ? can I made it manualy and how ?
> > > >
> > > > In the end of my livecd stage2 generation I've this :
> > > > Creating zisofs...
> > > > livecd-stage2: complete!
> > >
> > > Did you emerge catalyst with the cdr USE flag?  If not, then you'll need
> > > to install zisofs-tools onto your system.
> > >
> >
> > I've reemerged catalyst with cdr in USE flag then I've redo the
> > command catalyst - f livecd-stage2.spec but although I've the option
> > livecd/iso: /tmp/gentoo.iso, at the end of the catalyst process I've
> > no gentoo.iso in my /tmp dir.
> >
> > Any idea ?
> >
> > Thanks
> >
> > > > So I supposed that there are no problems but I've the line
> > > > "livecd/iso: /tmp/gentoo.iso" in my livecd-stage2.spec but in the end
> > > > no iso in my /tmp directory.
> > > >
> > > > Thanks for the work, it's really really great.
> > >
> > > --
> > > Chris Gianelloni
> > > Release Engineering - Strategic Lead/QA Manager
> > > Games - Developer
> > > Gentoo Linux
> > >
> > >
> > >
> > --
> > gentoo-catalyst@gentoo.org mailing list
> >
> >
> --
> gentoo-catalyst@gentoo.org mailing list
> 
>

[-- Attachment #2: livecd-stage1_template.spec --]
[-- Type: application/octet-stream, Size: 1770 bytes --]

## livecd-stage1 example specfile
## used to build a livecd-stage1

## John Davis <zhen@gentoo.org>

# subarch can be any of the supported Catalyst subarches (like athlon-xp). Refer
# to the catalyst reference manual (http://www.gentoo.org/proj/en/releng/catalyst) for supported arches.
# example:
# subarch: athlon-xp
subarch: x86

# version stamp is an identifier for the build. can be anything you want it to be, but it
# is usually a date.
# example:
# version_stamp: 2004.2
version_stamp: 20.01.2005 

# target specifies what type of build Catalyst is to do. check the catalyst reference manual
# for supported targets.
# example:
# target: stage2
target: livecd-stage1

# rel_type defines what kind of build we are doing. usually, default will suffice.
# example:
# rel_type: default
rel_type: default

# system profile used to build the media
# example:
# profile: default-x86-2004.0
profile: default-linux/x86/2004.3

# which snapshot to use
# example:
# snapshot: 20040614
snapshot: 20050113

# where the seed stage comes from, path is relative to $clst_sharedir (catalyst.conf)
# example:
# default/stage3-x86-2004.1
source_subpath: stage3-x86-2004.3

# use variables that we would like to use when building the LiveCD packages
livecd/use:
	-X
	-gtk
	-svga
	ipv6
	socks5
	livecd
	fbcon

# list of packages to be merged into the LiveCD fs.
livecd/packages:
	baselayout
	livecd-tools
	kudzu-knoppix
	module-init-tools
	hotplug
	irssi
	aumix
	metalog
	udev
	parted
	links
	strace
	nfs-utils
	jfsutils
	usbutils
	xfsprogs
	xfsdump
	e2fsprogs
	reiserfsprogs
	hdparm
	dhcpcd
	pwgen
	popt
	dialog
	rp-pppoe
	gpm
	screen
	mirrorselect
	penggy
	iputils
	hwdata-knoppix
	hwsetup
	splashutils
	gensplash
	device-mapper
	lvm2
	evms
	vim
	pwgen
	pptpclient
	mdadm
	ethtool

[-- Attachment #3: livecd-stage2_template.spec --]
[-- Type: application/octet-stream, Size: 5930 bytes --]

## livecd-stage2 example specfile
## used to build a livecd-stage2 iso image

## John Davis <zhen@gentoo.org>
## Chris Gianelloni <wolf31o2@gentoo.org>

# subarch can be any of the supported Catalyst subarches (like athlon-xp). Refer
# to the catalyst reference manual:
# (http://www.gentoo.org/proj/en/releng/catalyst) for supported arches.
# example:
# subarch: athlon-xp
subarch: x86

# version stamp is an identifier for the build. can be anything you want it
# to be, but it is usually a date.
# example:
# version_stamp: 2004.3
version_stamp: 20.01.2005

# target specifies what type of build Catalyst is to do.
# check the catalyst reference manual for supported targets.
# example:
# target: livecd-stage2
target: livecd-stage2

# rel_type defines what kind of build we are doing.
# usually, default will suffice.
# example:
# rel_type: default
rel_type: default

# system profile used to build the media
# example:
# profile: default-linux/x86/2004.3
profile: default-linux/x86/2004.3

# which snapshot to use
# example:
# snapshot: 20041022
snapshot: 20050113

# where the seed stage comes from, path is relative to $clst_sharedir (catalyst.conf)
# example:
# default/stage3-x86-2004.3
source_subpath: default/livecd-stage1-x86-20.01.2005

# which cdfs to use. valid values are:
# zisofs, squashfs, cloop, gcloop, and noloop
livecd/cdfstype: zisofs

# archscript and runscript to use. DO NOT CHANGE THESE UNLESS YOU KNOW WHAT YOU ARE DOING.
livecd/archscript: /usr/lib/catalyst/livecd/runscript/x86-archscript.sh
livecd/runscript: /usr/lib/catalyst/livecd/runscript/default-runscript.sh

# bootloader for the LiveCD - DO NOT CHANGE UNLESS YOU KNOW WHAT YOU ARE DOING.
livecd/cdtar: /usr/lib/catalyst/livecd/cdtar/isolinux-2.11-cdtar.tar.bz2

# (optional) create a iso and place it in the location specified
 livecd/iso: /tmp/gentoo.iso

# (optional) run this script in the LiveCD chroot to tweak the LiveCD fs
# livecd/fsscript: /tmp/myscript.sh

# (optional) files to be added to the final livecd product. note that they
# *are not* in the loopback fs itself, but in /mnt/cdrom when the cd is booted.
# the layout is in the overlay mirrors how it will be on the LiveCD.
 livecd/overlay: /home/nico/Desktop/install

# (optional) "global" arguments that are to be passed to genkernel
# livecd/gk_mainargs: --makeopts=-j3

# (optional) tweaks things such as the MOTD for release LiveCDs
 livecd/type: gentoo-release-universal

# (optional) the standard Gentoo release MOTD is included with Catalyst
 livecd/motd: /usr/lib/catalyst/livecd/files/generic.motd.txt

# (optional) list of modules that you want to blacklist for hotplug
# livecd/modblacklist: 8139cp

# (optional) splash type you wish to use on your LiveCD,  this can be either
# gensplash or bootsplash
 livecd/splash_type: gensplash

# (optional) splash theme to use - must be present in /etc/splash or
# /etc/bootsplash of the LiveCD before the initrd is completed.
 livecd/splash_theme: Gentoo-Hornet

# (optional) list of services to add to the specified runlevel
# livecd/rcadd: mkxf86config:default alsasound:default

# (optional) list of services to delete from the specified runlevel
# livecd/rcdel: net.eth0:boot

# (optional) xinitrc to use on the livecd
# livecd/xinitrc: /tmp/livecd_xinitrc

# (optional) directory that is to be overlayed on the livecd rootfs
# (the booted fs)
# livecd/root_overlay: /tmp/livecd-root-overlay

# (optional) if you want your livecd to use udev instead of devfs,
# uncomment this line
# livecd/devmanager: udev

# let catalyst know the names of the kernels that you want it to build
boot/kernel: gentoo

# for the first kernel (gentoo), let catalyst know what sources to use and
# what kernel config to use
boot/kernel/gentoo/sources: sys-kernel/gentoo-dev-sources
boot/kernel/gentoo/config: /etc/kernels/kernel-config-x86-2.6.10-gentoo-r6

# (optional) per-kernel arguments for genkernel
# boot/kernel/gentoo/gk_kernargs: --makeopts=-j2

# same as the gentoo kernel above, just different data
#boot/kernel/smp/sources: sys-kernel/gentoo-dev-sources
#boot/kernel/smp/config:

# (optional) per-kernel arguments for genkernel
# boot/kernel/smp/gk_kernargs: --makeopts=-j1

# this next line sets any USE settings you want exported to the environment for
# your kernel build *and* during the build of any kernel-dependent packages
boot/kernel/gentoo/use: pcmcia usb


# use this next option to add an extension to the name of your kernel. This
# allows you to have 2 identical kernels on the livecd built with different
# options, and each with their own modules dir in /lib/modules (otherwise
# the second kernel would overwrite the first modules directory.
boot/kernel/gentoo/extraversion: gentoo

# this next line is for merging kernel-dependent packages after your kernel
# is built. This is where you merge third-party ebuilds that contain kernel
# modules.
boot/kernel/gentoo/packages:
	pcmcia-cs
	speedtouch
	slmodem
	globespan-adsl
	hostap-driver
	hostap-utils
	ipw2100
	

# remove gcc from the list if you want distcc
livecd/unmerge:
	autoconf
	automake
	gcc
	bin86
	binutils
	libtool
	m4
	bison
	ld.so
	make
	perl
	patch
	linux-headers
	man-pages
	sash
	bison
	flex
	gettext
	texinfo
	ccache
	addpatches
	man
	groff
	lib-compat
	python
	miscfiles

livecd/empty:
	/var/tmp
	/var/cache
	/var/db
	/var/empty
	/var/cache
	/var/lock
	/tmp
	/usr/portage
	/usr/share/man
	/usr/share/info
	/usr/share/unimaps
	/usr/include
	/usr/share/zoneinfo
	/usr/share/dict
	/usr/share/doc
	/usr/share/ss
	/usr/share/state
	/usr/share/texinfo
	/usr/lib/python2.2
	/usr/lib/portage
	/usr/share/gettext
	/usr/share/i18n
	/usr/share/rfc
	/usr/X11R6/man
	/usr/X11R6/include
	/usr/X11R6/lib/X11/config
	/usr/X11R6/lib/X11/etc
	/usr/X11R6/lib/X11/doc
	/usr/src
	/usr/share/doc
	/usr/share/man
	/root/.ccache
livecd/rm:
	/lib/*.a
	/usr/lib/*.a
	/usr/lib/gcc-lib/*/*/libgcj*
	/usr/X11R6/lib/*.a
	/var/log/emerge.log
	/var/log/genkernel.log

Re: [gentoo-catalyst] livecd + gensplash

[martin nicolas]

It's good now, I've : 

-unmerged catalyst 1.1.5 (because I've had done some changes on the scripts)
-reemerged catalyst 1.1.5 
-used the livecd spec files from the gentoo releng cvs 

and now it's work fine, the iso is generated.

Sorry for the disturbance and thanks to all for the replies


On Sun, 30 Jan 2005 20:20:33 +0100, martin nicolas
<nicko.martin@gmail.com> wrote:
> Yes, of course, here is my spec files for the livecd stages 1 and 2
> (see in attachments).
> 
> What are you intend in "fsscript" ?
> 
> I add that before the version 1.1.4 this scripts were working fine but
> I've upgraded to 1.1.5 for having gensplash.
> 
> 
> On Sun, 30 Jan 2005 19:06:07 +0100, Julien Cayzac
> <julien.cayzac@gmail.com> wrote:
> > Could you post your spec files (and maybe your fsscript and other
> > script files) on the mailing list?
> > It's always good to see some working livecd setups...
> > Julien
> >
> > On Sun, 30 Jan 2005 16:14:28 +0100, martin nicolas
> > <nicko.martin@gmail.com> wrote:
> > > On Sun, 30 Jan 2005 09:05:42 -0500, Chris Gianelloni
> > > <wolf31o2@gentoo.org> wrote:
> > > > On Sun, 2005-01-30 at 11:42 +0100, martin nicolas wrote:
> > > > > Yes, it's sure that I've to be more clear explaining my problems.
> > > > >
> > > > > So, I've updated to catalyst 1.1.5 now the livecd stage 1 & 2 works
> > > > > fine but the iso isn't generated ?
> > > > > why ? can I made it manualy and how ?
> > > > >
> > > > > In the end of my livecd stage2 generation I've this :
> > > > > Creating zisofs...
> > > > > livecd-stage2: complete!
> > > >
> > > > Did you emerge catalyst with the cdr USE flag?  If not, then you'll need
> > > > to install zisofs-tools onto your system.
> > > >
> > >
> > > I've reemerged catalyst with cdr in USE flag then I've redo the
> > > command catalyst - f livecd-stage2.spec but although I've the option
> > > livecd/iso: /tmp/gentoo.iso, at the end of the catalyst process I've
> > > no gentoo.iso in my /tmp dir.
> > >
> > > Any idea ?
> > >
> > > Thanks
> > >
> > > > > So I supposed that there are no problems but I've the line
> > > > > "livecd/iso: /tmp/gentoo.iso" in my livecd-stage2.spec but in the end
> > > > > no iso in my /tmp directory.
> > > > >
> > > > > Thanks for the work, it's really really great.
> > > >
> > > > --
> > > > Chris Gianelloni
> > > > Release Engineering - Strategic Lead/QA Manager
> > > > Games - Developer
> > > > Gentoo Linux
> > > >
> > > >
> > > >
> > > --
> > > gentoo-catalyst@gentoo.org mailing list
> > >
> > >
> > --
> > gentoo-catalyst@gentoo.org mailing list
> >
> >
> 
> 
>
--
gentoo-catalyst@gentoo.org mailing list