[gentoo-catalyst] livecd stage2 pb

[gentoo-catalyst] livecd stage2 pb

[ccedric]

Hello,
I have some problemes with livecd_Stage2. I'm using Gentoo Catalyst, version
2.0_rc45.
I was using catalyst 1 6 months agoo, and it was working for me.
so i changes my  specs files  looking  in 
/usr/share/doc/catalyst-2.0_rc45/examples/
now :
catalyst2 -f cedric_stage1.spec works fine
but catalyst2 -f cedric_stage2.spec exit with error after genkernel.
folowing are the end of the catalyst and genkernel logs.


---------------------------------------- catalyst log
-------------------------------------
.....
  LD [M]  drivers/net/wan/hdlc.o
  CC [M]  drivers/net/wan/wanxl.o
  CC [M]  drivers/usb/net/kaweth.o
  CC [M]  drivers/net/wireless/strip.o
drivers/usb/net/kaweth.c: In function 'kaweth_control':
drivers/usb/net/kaweth.c:1212: warning: 'length' may be used uninitialized
in this function
--

* <<< Callback exit status: 1
* Gentoo Linux Genkernel; Version 3.4.4
* Running with options: --callback=PKGDIR=/tmp/kerncache/cedkern/ebuilds
emerge -kb                             pcmcia-cs ndiswrapper nvidia-kernel
hostap-driver --menuconfig
--cachedir=/tmp/kerncache/cedkern-genkernel_cache-Ulysse_2006.1
--no-mountboot --kerneldir=/usr/src/linux
--kernel-config=/var/tmp/cedkern.config
--modulespackage=/tmp/kerncache/cedkern-modules-Ulysse_2006.1.tar.bz2
--minkernpackage=/tmp/kerncache/cedkern-kernel-initrd-Ulysse_2006.1.tar.bz2
--kerncache=/tmp/kerncache/cedkern-kerncache-Ulysse_2006.1.tar.bz2 all

* ERROR: --callback failed!

* -- End log... --

* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.

* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
*
* Please do *not* report compilation failures as genkernel bugs!
*

!!! catalyst: Runscript kernel build failed


Traceback (most recent call last):
  File "modules/generic_stage_target.py", line 1243, in build_kernel
    "Runscript kernel build failed",env=self.env)
  File "/usr/lib/catalyst2/modules/catalyst_support.py", line 487, in cmd
    raise CatalystError,myexc
CatalystError: <unprintable instance object>
None

!!! catalyst: build aborting due to kernel build error.


Catalyst aborting....

---------------------------------------- genkernel log
-------------------------------------
.....* busybox: >> Copying to cache...
* initramfs: >> Initializing...
*         >> Creating base_layout cpio archive...
*         >> Creating auxilary cpio archive...
*         >> Creating busybox cpio archive...
*         >> Creating insmod cpio archive...
*         >> Creating modules cpio archive...
* Merging
*     initramfs-base-layout.cpio.gz
*     initramfs-aux.cpio.gz
*     initramfs-busybox-1.1.3+gentoo.cpio.gz
*     initramfs-insmod-0.9.15-pre4.cpio.gz
*     initramfs-modules-2.6.16-gentoo-r7.cpio.gz
*
* Kernel compiled successfully!
*
* Required Kernel Parameters:
*     real_root=/dev/$ROOT
*
*     Where $ROOT is the device node for your root partition as the
*     one specified in /etc/fstab
*
* If you require Genkernel's hardware detection features; you MUST
* tell your bootloader to use the provided INITRAMFS file. Otherwise;
* substitute the root argument for the real_root argument if you are
* not planning to use the initrd...
* WARNING... WARNING... WARNING...
* Additional kernel cmdline arguments that *may* be required to boot
properly...* add "vga=791 splash=silent" if you use a bootsplash framebuffer
* Do NOT report kernel bugs as genkernel bugs unless your bug
* is about the default genkernel configuration...
*
* Make sure you have the latest genkernel before reporting bugs.

-- 
View this message in context: http://www.nabble.com/livecd-stage2-pb-tf2774356.html#a7739090
Sent from the gentoo-catalyst mailing list archive at Nabble.com.

-- 
gentoo-catalyst@gentoo.org mailing list

Re: [gentoo-catalyst] livecd stage2 pb

[ccedric]

Hello,
sorry for the noise, But I have real difficulties in english. So it what not
easy for me  to find the usefull part of the log.
I didn't enderstood  what whas "callback" :-(
so now i think it come from  the 
boot/kernel/"my_ kernel"/packages
from my spec file.
I wil look today if it solve my problem.
regards
 

ccedric wrote:
> 
> (...)
> * <<< Callback exit status: 1
> * Gentoo Linux Genkernel; Version 3.4.4
> * Running with options: --callback=PKGDIR=/tmp/kerncache/cedkern/ebuilds
> emerge -kb                             pcmcia-cs ndiswrapper nvidia-kernel
> hostap-driver --menuconfig
> --cachedir=/tmp/kerncache/cedkern-genkernel_cache-Ulysse_2006.1
> --no-mountboot --kerneldir=/usr/src/linux
> --kernel-config=/var/tmp/cedkern.config
> --modulespackage=/tmp/kerncache/cedkern-modules-Ulysse_2006.1.tar.bz2
> --minkernpackage=/tmp/kerncache/cedkern-kernel-initrd-Ulysse_2006.1.tar.bz2
> --kerncache=/tmp/kerncache/cedkern-kerncache-Ulysse_2006.1.tar.bz2 all
> 
> * ERROR: --callback failed!
> 
> (...)
> !! catalyst: Runscript kernel build failed
> (...)
> 

-- 
View this message in context: http://www.nabble.com/livecd-stage2-pb-tf2774356.html#a7756414
Sent from the gentoo-catalyst mailing list archive at Nabble.com.

-- 
gentoo-catalyst@gentoo.org mailing list