[gentoo-catalyst] Error creating stage1

[gentoo-catalyst] Error creating stage1

[Luca Casagrande]

Hi to all!

Today i have started the creation of a new livecd; after built the portage snapshoot with
catalyst -s, I go for the stage1, using this profile:

subarch: x86
target: stage1
version_stamp: ominiverdi
rel_type: default
profile: default-linux/x86/2006.1
snapshot: 20061224
source_subpath: default/stage3-x86-2006.0

All is fine till coreutils, that stops with this error:

[..]
make[2]: Entering directory `/var/tmp/portage/coreutils-6.4/work/coreutils-6.4/tests/sort'
test 'sort' = test && prog=../../src/sort || prog=sort; \
perl -I. -w -- ./../mk-script . $prog > sort-tests.n
Can't locate auto/POSIX/assert.al in @INC (@INC contains: . /etc/perl /usr/lib/perl5/vendor_perl/5.8.8/i686-linux /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl /usr/lib/perl5/site_perl/5.8.8/i686-linux /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl /usr/lib/perl5/5.8.8/i686-linux /usr/lib/perl5/5.8.8 /usr/local/lib/site_perl .) at ./../mk-script line 52
make[2]: *** [sort-tests] Error 255
make[2]: Leaving directory `/var/tmp/portage/coreutils-6.4/work/coreutils-6.4/tests/sort'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/coreutils-6.4/work/coreutils-6.4/tests'
make: *** [all-recursive] Error 1

!!! ERROR: sys-apps/coreutils-6.4 failed.
Call stack:
  ebuild.sh, line 1546:   Called dyn_compile
  ebuild.sh, line 937:   Called src_compile
  coreutils-6.4.ebuild, line 101:   Called die


I am using catalyst 2.0.1.

Thanks for your help!

Luca

-- 
Help QGIS development! Make a donation right now at http://xrl.us/supportqgis

LINUX User #411601
GENTOO-GIS Development Team
jabber: casagrande@jabber.linux.it

 
-- 
gentoo-catalyst@gentoo.org mailing list

Re: [gentoo-catalyst] Error creating stage1

[Andrew Gaffney]

Luca Casagrande wrote:
> Hi to all!
> 
> Today i have started the creation of a new livecd; after built the portage snapshoot with
> catalyst -s, I go for the stage1, using this profile:

This is not a problem with catalyst. It's a bug in the ebuild and/or your source 
stage.

-- 
Andrew Gaffney                            http://dev.gentoo.org/~agaffney/
Gentoo Linux Developer                                   Installer Project
Today's lesson in political correctness:      "Go asphyxiate on a phallus"
-- 
gentoo-catalyst@gentoo.org mailing list

[gentoo-catalyst] Re: Error creating stage1

[John Eckhart]

Luca Casagrande wrote:
> Hi to all!
> 
> Today i have started the creation of a new livecd; after built the portage snapshoot with
> catalyst -s, I go for the stage1, using this profile:
> 
> subarch: x86
> target: stage1
> version_stamp: ominiverdi
> rel_type: default
> profile: default-linux/x86/2006.1
> snapshot: 20061224
> source_subpath: default/stage3-x86-2006.0
> 
> All is fine till coreutils, that stops with this error:
> 
> [..]
> make[2]: Entering directory `/var/tmp/portage/coreutils-6.4/work/coreutils-6.4/tests/sort'
> test 'sort' = test && prog=../../src/sort || prog=sort; \
> perl -I. -w -- ./../mk-script . $prog > sort-tests.n
> Can't locate auto/POSIX/assert.al in @INC (@INC contains: . /etc/perl /usr/lib/perl5/vendor_perl/5.8.8/i686-linux /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl /usr/lib/perl5/site_perl/5.8.8/i686-linux /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl /usr/lib/perl5/5.8.8/i686-linux /usr/lib/perl5/5.8.8 /usr/local/lib/site_perl .) at ./../mk-script line 52
> make[2]: *** [sort-tests] Error 255
> make[2]: Leaving directory `/var/tmp/portage/coreutils-6.4/work/coreutils-6.4/tests/sort'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/var/tmp/portage/coreutils-6.4/work/coreutils-6.4/tests'
> make: *** [all-recursive] Error 1
> 
> !!! ERROR: sys-apps/coreutils-6.4 failed.
> Call stack:
>   ebuild.sh, line 1546:   Called dyn_compile
>   ebuild.sh, line 937:   Called src_compile
>   coreutils-6.4.ebuild, line 101:   Called die
> 
> 
> I am using catalyst 2.0.1.
> 
> Thanks for your help!
> 
> Luca
> 

Luca,
	There is a bug open for this at:
https://bugs.gentoo.org/show_bug.cgi?id=147184

I submitted a patch that worked for me, but YMMV.

The patch has to be applied to the portage snapshot in the 
snapshot_cache directory. Don't forget to rebuild the digest after 
patching the ebuild. You might also want to recreate the portage 
snapshot from the cache in case you try to do a clean build later.
-- 
gentoo-catalyst@gentoo.org mailing list

[gentoo-catalyst] error creating stage1

[Franco Vecchiato]

Hi all,

I'm using catalyst to create my own stage3, but I have problems creating
stage1.
I created the portage snapshot (catalyst -s 09032008), no problems
there, but the following command (catalyst -f /path/to/stage1.spec
> /path/to/logstage1) always gives these errors (final part of
logstage1):

<end_of_logstage1>
....
test !
-x /var/tmp/portage/sys-libs/glibc-2.6.1/work/build-default-i686-pc-linux-gnu-nptl/elf/ldconfig || LC_ALL=C LANGUAGE=C \
     /var/tmp/portage/sys-libs/glibc-2.6.1/work/build-default-i686-pc-linux-gnu-nptl/elf/ldconfig -r /var/tmp/portage/sys-libs/glibc-2.6.1/image/ \
                   /lib /usr/lib
/var/tmp/portage/sys-libs/glibc-2.6.1/work/build-default-i686-pc-linux-gnu-nptl/elf/ldconfig: Can't open configuration file /etc/ld.so.conf: No such file or directory
make[1]: Leaving directory
`/var/tmp/portage/sys-libs/glibc-2.6.1/work/glibc-2.6.1'
/usr/portage/sys-libs/glibc/files/eblits/src_install.eblit: line 215:
i686-pc-linux-gnu-strip: command not found
 *
 * ERROR: sys-libs/glibc-2.6.1 failed.
 * Call stack:
 *               ebuild.sh, line   49:  Called src_install
 *             environment, line 3483:  Called eblit-run 'src_install'
 *             environment, line 1146:  Called die
 * The specific snippet of code:
 *       eblit-${PN}-$1 || die;
 *  The die message:
 *   (no error message)
 *
 * If you need support, post the topmost build error, and the call stack
if relevant.
 * A complete build log is located at
'/var/tmp/portage/sys-libs/glibc-2.6.1/temp/build.log'.
 * The ebuild environment file is located at
'/var/tmp/portage/sys-libs/glibc-2.6.1/temp/environment'.
 *

 * Messages for package dev-libs/expat-2.0.1 merged to /tmp/stage1root/:

 * Please note that the soname of the library changed!
 * If you are upgrading from a previous version you need
 * to fix dynamic linking inconsistencies by executing:
 * revdep-rebuild -X --library libexpat.so.0

 * Messages for package sys-apps/sandbox-1.2.18.1-r2 merged
to /tmp/stage1root/:

 * If configure fails with a 'cannot run C compiled programs' error, try
this:
 * FEATURES=-sandbox emerge sandbox

 * Messages for package sys-libs/timezone-data-2007k merged
to /tmp/stage1root/:

 * You do not have TIMEZONE set in /etc/conf.d/clock.
 * Setting /etc/localtime to Factory.

 * Messages for package app-editors/nano-2.0.7 merged
to /tmp/stage1root/:

 * More helpful info about nano, visit the GDP page:
 * http://www.gentoo.org/doc/en/nano-basics-guide.xml

 * Messages for package dev-libs/libxml2-2.6.30-r1 merged
to /tmp/stage1root/:

 * Skipping XML catalog creation for stage building (bug #208887).

 * Messages for package sys-libs/glibc-2.6.1 merged to /tmp/stage1root/:

 *
 * ERROR: sys-libs/glibc-2.6.1 failed.
 * Call stack:
 *               ebuild.sh, line   49:  Called src_install
 *             environment, line 3483:  Called eblit-run 'src_install'
 *             environment, line 1146:  Called die
 * The specific snippet of code:
 *       eblit-${PN}-$1 || die;
 *  The die message:
 *   (no error message)
 *
 * If you need support, post the topmost build error, and the call stack
if relevant.
 * A complete build log is located at
'/var/tmp/portage/sys-libs/glibc-2.6.1/temp/build.log'.
 * The ebuild environment file is located at
'/var/tmp/portage/sys-libs/glibc-2.6.1/temp/environment'.
 *

!!! catalyst: run script failed.


Traceback (most recent call last):
  File "modules/generic_stage_target.py", line 1062, in run_local
    cmd("/bin/bash "+self.settings["controller_file"]+" run","run script
failed.",env=self.env)
  File "/usr/lib/catalyst/modules/catalyst_support.py", line 486, in cmd
    raise CatalystError,myexc
CatalystError: <unprintable instance object>
None

!!! catalyst: Stage build aborting due to error.

!!! catalyst: Error encountered during run of target stage1

Catalyst aborting....
lockfile does not exist
'/var/tmp/catalyst/tmp/default/stage1-i686-09032008/.catalyst_lock'
</end_of_logstage1>


The directory /var/tmp/catalyst/tmp/default/stage1-i686-09032008 has
been created (along with its content, also .catalyst_lock), but
the .tar.bz2 file has not.


This is my stage1.spec file:

<code>
subarch: i686
version_stamp: 09032008
target: stage1
rel_type: default
profile: default-linux/x86/2007.0
snapshot: 09032008
source_subpath: stage3-x86-2007.0
distcc_hosts:
portage_confdir: /etc/portage
portage_overlay:
pkgcache_path: /tmp/packages
chost: i686-pc-linux-gnu
cflags: -O2 -pipe -fomit-frame-pointer -mtune=i686
cxxflags: -O2 -pipe -fomit-frame-pointer -mtune=i686
ldflags:
</code>


my gentoo laptop (IBM ThinkPad T23) is updated and I use catalyst 2.0.5

I tried several times those two commands (catalyst -s ... and catalyst
-f ...), after several complete updates (emerge -uD world).
I also tried -Os in cflags and cxxflags, never modified the
standard /etc/catalyst/catalyst.conf file.

I'm a newbie of Gentoo, maybe there's something wrong or something I
don't know.
Any suggestions?

Thanks in advance

Franco Vecchiato

-- 
gentoo-catalyst@lists.gentoo.org mailing list