[gentoo-catalyst] Test Request: Catalyst 2.0_pre20051111

[gentoo-catalyst] Test Request: Catalyst 2.0_pre20051111

[Chris Gianelloni]

[-- Attachment #1: Type: text/plain, Size: 2109 bytes --]

As you can probably guess by the subject, I've added
catalyst-2.0_pre20051111 to the tree.  I plan on finalizing catalyst 2.0
by the end of the month, so I really need testers for this.  If you have
questions about this release, feel free to ask them on gentoo-catalyst.
For bugs, please files bugs.

To install it, you will need to do the following (on x86):

mkdir -p /etc/portage
echo "dev-util/catalyst" >> /etc/portage/package.unmask
echo "dev-util/catalyst ~x86" >> /etc/portage/package.keywords
USE="doc" emerge catalyst

Please use USE="doc" to get the updated example spec templates.  The
livecd-specs package has not been updated for catalyst 2.0, so there's
no need for USE="examples" unless you're unfamiliar with catalyst.

This is slotted to run along-side catalyst 1.x, so it shouldn't break
anybody's machines.  Once catalyst 2.0 goes final, it will no longer be
slotted, as we are completely superseding catalyst 1.x with catalyst
2.0.

The main differences in your spec files are all going to be in
livecd-stage2:

livecd/cdfstype -> livecd/fstype
livecd/archscript (removed)
livecd/runscript (removed)

Everything else *should* be the same.  There's also a ton of new options
for caching, so catalyst 2.0 runs should be dramatically faster for
repeated runs.  We're planning on using this for 2006.0, so we want it
bug-fixed and stabilized by no later than the end of the year.  Please
test this release.

This release also brings about the addition of the "stage4" target.  A
stage4 is essentially livecd-stage1 + livecd-stage2, rolled into a
tarball, rather than an ISO.  This allows you to deploy a pre-configured
(yay fsscript!) tarball out to multiple machines, install the
bootloader, and reboot.  While I we are interested in bug reports on the
stage4 target, I ask you to focus time on the "classic" targets: stages
1 through 3, and livecd-stages 1 and 2, as we will be using these on the
next release.

Thanks again,

-- 
Chris Gianelloni
Release Engineering - Strategic Lead
x86 Architecture Team
Games - Developer
Gentoo Linux

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

RE: [gentoo-catalyst] Test Request: Catalyst 2.0_pre20051111

[Kessler, Paul]

[-- Attachment #1: Type: text/plain, Size: 2724 bytes --]

Ok so this isn't a bug but in the livecd-stage2 template example the livecd/linuxrc section is duplicated. Also thanks for adding the options in the stage 2 for configuring the X session and display manager. That eliminates two lines from my fsscript. Just wondering but has kerncache been fixed? Going to start the first build now.
 
Paul

________________________________

From: Chris Gianelloni [mailto:wolf31o2@gentoo.org]
Sent: Fri 11/11/2005 10:17 AM
To: gentoo-catalyst@lists.gentoo.org
Cc: gentoo-releng@lists.gentoo.org
Subject: [gentoo-catalyst] Test Request: Catalyst 2.0_pre20051111



As you can probably guess by the subject, I've added
catalyst-2.0_pre20051111 to the tree.  I plan on finalizing catalyst 2.0
by the end of the month, so I really need testers for this.  If you have
questions about this release, feel free to ask them on gentoo-catalyst.
For bugs, please files bugs.

To install it, you will need to do the following (on x86):

mkdir -p /etc/portage
echo "dev-util/catalyst" >> /etc/portage/package.unmask
echo "dev-util/catalyst ~x86" >> /etc/portage/package.keywords
USE="doc" emerge catalyst

Please use USE="doc" to get the updated example spec templates.  The
livecd-specs package has not been updated for catalyst 2.0, so there's
no need for USE="examples" unless you're unfamiliar with catalyst.

This is slotted to run along-side catalyst 1.x, so it shouldn't break
anybody's machines.  Once catalyst 2.0 goes final, it will no longer be
slotted, as we are completely superseding catalyst 1.x with catalyst
2.0.

The main differences in your spec files are all going to be in
livecd-stage2:

livecd/cdfstype -> livecd/fstype
livecd/archscript (removed)
livecd/runscript (removed)

Everything else *should* be the same.  There's also a ton of new options
for caching, so catalyst 2.0 runs should be dramatically faster for
repeated runs.  We're planning on using this for 2006.0, so we want it
bug-fixed and stabilized by no later than the end of the year.  Please
test this release.

This release also brings about the addition of the "stage4" target.  A
stage4 is essentially livecd-stage1 + livecd-stage2, rolled into a
tarball, rather than an ISO.  This allows you to deploy a pre-configured
(yay fsscript!) tarball out to multiple machines, install the
bootloader, and reboot.  While I we are interested in bug reports on the
stage4 target, I ask you to focus time on the "classic" targets: stages
1 through 3, and livecd-stages 1 and 2, as we will be using these on the
next release.

Thanks again,

--
Chris Gianelloni
Release Engineering - Strategic Lead
x86 Architecture Team
Games - Developer
Gentoo Linux



[-- Attachment #2: winmail.dat --]
[-- Type: application/ms-tnef, Size: 5489 bytes --]

Re: [gentoo-catalyst] Test Request: Catalyst 2.0_pre20051111

[Eric Edgar]

[-- Attachment #1: Type: text/plain, Size: 2951 bytes --]

kerncache should be fixed now
Eric

On 12:50 Fri 11 Nov     , Kessler, Paul wrote:
> Ok so this isn't a bug but in the livecd-stage2 template example the livecd/linuxrc section is duplicated. Also thanks for adding the options in the stage 2 for configuring the X session and display manager. That eliminates two lines from my fsscript. Just wondering but has kerncache been fixed? Going to start the first build now.
>  
> Paul
> 
> ________________________________
> 
> From: Chris Gianelloni [mailto:wolf31o2@gentoo.org]
> Sent: Fri 11/11/2005 10:17 AM
> To: gentoo-catalyst@lists.gentoo.org
> Cc: gentoo-releng@lists.gentoo.org
> Subject: [gentoo-catalyst] Test Request: Catalyst 2.0_pre20051111
> 
> 
> 
> As you can probably guess by the subject, I've added
> catalyst-2.0_pre20051111 to the tree.  I plan on finalizing catalyst 2.0
> by the end of the month, so I really need testers for this.  If you have
> questions about this release, feel free to ask them on gentoo-catalyst.
> For bugs, please files bugs.
> 
> To install it, you will need to do the following (on x86):
> 
> mkdir -p /etc/portage
> echo "dev-util/catalyst" >> /etc/portage/package.unmask
> echo "dev-util/catalyst ~x86" >> /etc/portage/package.keywords
> USE="doc" emerge catalyst
> 
> Please use USE="doc" to get the updated example spec templates.  The
> livecd-specs package has not been updated for catalyst 2.0, so there's
> no need for USE="examples" unless you're unfamiliar with catalyst.
> 
> This is slotted to run along-side catalyst 1.x, so it shouldn't break
> anybody's machines.  Once catalyst 2.0 goes final, it will no longer be
> slotted, as we are completely superseding catalyst 1.x with catalyst
> 2.0.
> 
> The main differences in your spec files are all going to be in
> livecd-stage2:
> 
> livecd/cdfstype -> livecd/fstype
> livecd/archscript (removed)
> livecd/runscript (removed)
> 
> Everything else *should* be the same.  There's also a ton of new options
> for caching, so catalyst 2.0 runs should be dramatically faster for
> repeated runs.  We're planning on using this for 2006.0, so we want it
> bug-fixed and stabilized by no later than the end of the year.  Please
> test this release.
> 
> This release also brings about the addition of the "stage4" target.  A
> stage4 is essentially livecd-stage1 + livecd-stage2, rolled into a
> tarball, rather than an ISO.  This allows you to deploy a pre-configured
> (yay fsscript!) tarball out to multiple machines, install the
> bootloader, and reboot.  While I we are interested in bug reports on the
> stage4 target, I ask you to focus time on the "classic" targets: stages
> 1 through 3, and livecd-stages 1 and 2, as we will be using these on the
> next release.
> 
> Thanks again,
> 
> --
> Chris Gianelloni
> Release Engineering - Strategic Lead
> x86 Architecture Team
> Games - Developer
> Gentoo Linux
> 
> 



[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-catalyst] Test Request: Catalyst 2.0_pre20051111

[Eric Edgar]

[-- Attachment #1: Type: text/plain, Size: 3225 bytes --]

You may want to also enable 
seedcache
snapcache 
autoresume

Eric


On 19:13 Fri 11 Nov     , Eric Edgar wrote:
> kerncache should be fixed now
> Eric
> 
> On 12:50 Fri 11 Nov     , Kessler, Paul wrote:
> > Ok so this isn't a bug but in the livecd-stage2 template example the livecd/linuxrc section is duplicated. Also thanks for adding the options in the stage 2 for configuring the X session and display manager. That eliminates two lines from my fsscript. Just wondering but has kerncache been fixed? Going to start the first build now.
> >  
> > Paul
> > 
> > ________________________________
> > 
> > From: Chris Gianelloni [mailto:wolf31o2@gentoo.org]
> > Sent: Fri 11/11/2005 10:17 AM
> > To: gentoo-catalyst@lists.gentoo.org
> > Cc: gentoo-releng@lists.gentoo.org
> > Subject: [gentoo-catalyst] Test Request: Catalyst 2.0_pre20051111
> > 
> > 
> > 
> > As you can probably guess by the subject, I've added
> > catalyst-2.0_pre20051111 to the tree.  I plan on finalizing catalyst 2.0
> > by the end of the month, so I really need testers for this.  If you have
> > questions about this release, feel free to ask them on gentoo-catalyst.
> > For bugs, please files bugs.
> > 
> > To install it, you will need to do the following (on x86):
> > 
> > mkdir -p /etc/portage
> > echo "dev-util/catalyst" >> /etc/portage/package.unmask
> > echo "dev-util/catalyst ~x86" >> /etc/portage/package.keywords
> > USE="doc" emerge catalyst
> > 
> > Please use USE="doc" to get the updated example spec templates.  The
> > livecd-specs package has not been updated for catalyst 2.0, so there's
> > no need for USE="examples" unless you're unfamiliar with catalyst.
> > 
> > This is slotted to run along-side catalyst 1.x, so it shouldn't break
> > anybody's machines.  Once catalyst 2.0 goes final, it will no longer be
> > slotted, as we are completely superseding catalyst 1.x with catalyst
> > 2.0.
> > 
> > The main differences in your spec files are all going to be in
> > livecd-stage2:
> > 
> > livecd/cdfstype -> livecd/fstype
> > livecd/archscript (removed)
> > livecd/runscript (removed)
> > 
> > Everything else *should* be the same.  There's also a ton of new options
> > for caching, so catalyst 2.0 runs should be dramatically faster for
> > repeated runs.  We're planning on using this for 2006.0, so we want it
> > bug-fixed and stabilized by no later than the end of the year.  Please
> > test this release.
> > 
> > This release also brings about the addition of the "stage4" target.  A
> > stage4 is essentially livecd-stage1 + livecd-stage2, rolled into a
> > tarball, rather than an ISO.  This allows you to deploy a pre-configured
> > (yay fsscript!) tarball out to multiple machines, install the
> > bootloader, and reboot.  While I we are interested in bug reports on the
> > stage4 target, I ask you to focus time on the "classic" targets: stages
> > 1 through 3, and livecd-stages 1 and 2, as we will be using these on the
> > next release.
> > 
> > Thanks again,
> > 
> > --
> > Chris Gianelloni
> > Release Engineering - Strategic Lead
> > x86 Architecture Team
> > Games - Developer
> > Gentoo Linux
> > 
> > 
> 
> 



[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

RE: [gentoo-catalyst] Test Request: Catalyst 2.0_pre20051111

[Chris Gianelloni]

[-- Attachment #1: Type: text/plain, Size: 586 bytes --]

On Fri, 2005-11-11 at 12:50 -0600, Kessler, Paul wrote:
> Ok so this isn't a bug but in the livecd-stage2 template example the livecd/linuxrc section is duplicated.

Fixed in CVS.

> Also thanks for adding the options in the stage 2 for configuring the X session and display manager. That eliminates two lines from my fsscript.

It removes a couple from mine, too.

> Just wondering but has kerncache been fixed? Going to start the first build now.

Yes.

-- 
Chris Gianelloni
Release Engineering - Strategic Lead
x86 Architecture Team
Games - Developer
Gentoo Linux

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]