Re: [gentoo-catalyst] Cannot get catalyst to work

Re: [gentoo-catalyst] Cannot get catalyst to work

[Steffen Hönig]

complete log

[quote]

Gentoo Catalyst, version 1.1.8
Copyright 2003-2005 The Gentoo Foundation
Distributed under the GNU General Public License version 2

Using default Catalyst configuration file, /etc/catalyst/catalyst.conf
Setting storedir to default value "/var/tmp/catalyst"
Setting portdir to default value "/usr/portage"
Setting distdir to config file value "/usr/portage/distfiles"
Setting options to config file value "pkgcache kerncache"
Setting sharedir to config file value "/usr/lib/catalyst"
Package cache support enabled.
Kernel cache support enabled.
Building natively for x86
stage1 stage path is /var/tmp/catalyst/tmp/default/stage1-x86-2005.0/tmp/stage1root
Running action sequence: dir_setup
Setting up directories...
Running command "rm -rf /var/tmp/catalyst/tmp/default/stage1-x86-2005.0"
Running action sequence: unpack_and_bind
Unpacking stage tarball...
Running command "tar xjpf /var/tmp/catalyst/builds/default/stage3-x86-2005.0.tar.bz2 -C /var/tmp/catalyst/tmp/default/stage1-x86-2005.0"
Unpacking portage tree snapshot...
Running command "tar xjpf /var/tmp/catalyst/snapshots/portage-2005.0.1.tar.bz2 -C /var/tmp/catalyst/tmp/default/stage1-x86-2005.0/usr"
Configuring profile link...
Running command "rm -f /var/tmp/catalyst/tmp/default/stage1-x86-2005.0/etc/make.profile"
Running command "ln -sf ../usr/portage/profiles/default-x86-2005.0 /var/tmp/catalyst/tmp/default/stage1-x86-2005.0/etc/make.profile"
Running action sequence: chroot_setup
Setting up chroot...
Running command "cp /etc/resolv.conf /var/tmp/catalyst/tmp/default/stage1-x86-2005.0/etc"
Running command "mv /var/tmp/catalyst/tmp/default/stage1-x86-2005.0/etc/hosts /var/tmp/catalyst/tmp/default/stage1-x86-2005.0/etc/hosts.bck"
Running command "cp /etc/hosts /var/tmp/catalyst/tmp/default/stage1-x86-2005.0/etc/hosts"
Running command "rm -f /var/tmp/catalyst/tmp/default/stage1-x86-2005.0/etc/make.conf"
Running action sequence: setup_environment
Running action sequence: run_local
Running command "/bin/bash /usr/lib/catalyst/targets/stage1/stage1.sh run"

>>> Regenerating /etc/ld.so.cache...
 ^[[32;01m*^[[0m Caching service dependencies...
 ^[[32;01m*^[[0m Switching to i386-pc-linux-gnu-3.3.5-hardenednopie compiler...
^[[A^[[173G  ^[[34;01m[ ^[[32;01mok^[[34;01m ]^[[0m

 ^[[33;01m*^[[0m If you intend to use the gcc from the new profile in an already
 ^[[33;01m*^[[0m running shell, please remember to do:

 ^[[33;01m*^[[0m   # source /etc/profile

 ^[[32;01m*^[[0m Switching to i386-pc-linux-gnu-3.3.5 compiler...
^[[A^[[173G  ^[[34;01m[ ^[[32;01mok^[[34;01m ]^[[0m

 ^[[33;01m*^[[0m If you intend to use the gcc from the new profile in an already
 ^[[33;01m*^[[0m running shell, please remember to do:

 ^[[33;01m*^[[0m   # source /etc/profile

>>> /tmp/stage1root/tmp doesn't exist, creating it...
>>> /tmp/stage1root/var/tmp doesn't exist, creating it...
>>> /tmp/stage1root//var/cache/edb doesn't exist, creating it...
>>> /tmp/stage1root//var/cache/edb/dep doesn't exist, creating it...


^[[32;01mPerforming Global Updates: ^[[39;49;00m^[[01m/usr/portage/profiles/updates/3Q-2002^[[39;49;00m
(Could take a couple of minutes if you have a lot of binary packages.)
  ^[[01m.^[[39;49;00m='update pass'  ^[[01m*^[[39;49;00m='binary update'  ^[[01m@^[[39;49;00m='/var/db move'
  ^[[01ms^[[39;49;00m='/var/db SLOT move' ^[[01mS^[[39;49;00m='binary SLOT move' ^[[01mp^[[39;49;00m='update /etc/portage/package.*'
<snip> ...</snip>

^[[32;01mPerforming Global Updates: ^[[39;49;00m^[[01m/usr/portage/profiles/updates/2Q-2005^[[39;49;00m
(Could take a couple of minutes if you have a lot of binary packages.)
  ^[[01m.^[[39;49;00m='update pass'  ^[[01m*^[[39;49;00m='binary update'  ^[[01m@^[[39;49;00m='/var/db move'
  ^[[01ms^[[39;49;00m='/var/db SLOT move' ^[[01mS^[[39;49;00m='binary SLOT move' ^[[01mp^[[39;49;00m='update /etc/portage/package.*'

............................................
emerge: please tell me what to do.


Usage:
   emerge [ options ] [ action ] [ ebuildfile | tbz2file | dependency ] [ ... ]
   emerge [ options ] [ action ] < system | world >
   emerge < --sync | --metadata | --info >
   emerge --resume [ --pretend | --ask | --skipfirst ]
   emerge --help [ system | config | sync ] 
Options: -[abcCdDefhikKlnoOpPsSuUvV] [--oneshot] [--newuse] [--noconfmem]
                                    [--columns] [--nospinner]
Actions: [ --clean | --depclean | --inject | --prune | --regen | --search | --unmerge ]


   For more help try 'emerge --help' or consult the man page.

None
None

!!! catalyst: build script failed


Traceback (most recent call last):
  File "modules/generic_stage_target.py", line 394, in run_local
    "/"+self.settings["target"]+".sh run","build script failed")
  File "/usr/lib/catalyst/modules/catalyst_support.py", line 98, in cmd
    raise CatalystError,myexc
CatalystError: <unprintable instance object>
None

!!! catalyst: Stage build aborting due to error.

[/quote]


-- 
gentoo-catalyst@gentoo.org mailing list

[gentoo-catalyst] Cannot get catalyst to work

[Steffen Hoenig]

Hi there,

Tried to install catalyst several times, also with different versions
of optimized built compiler (whole bootstrap) (athlon-xp,none,i686)  but
it will display always the same:

[quote]
!!! ARCH is not set... Are you missing the /etc/make.profile symlink?
!!! Is the symlink correct? Is your portage tree complete?
[/quote]

/etc/make.profile is set correctly and if you export $ARCH these lines
will disappear, but the problem below still exists. 

[quote]

None
None

!!! catalyst: build script failed


Traceback (most recent call last):
  File "modules/generic_stage_target.py", line 394, in run_local
    "/"+self.settings["target"]+".sh run","build script failed")
  File "/usr/lib/catalyst/modules/catalyst_support.py", line 98, in cmd
    raise CatalystError,myexc
CatalystError: <unprintable instance object>
None

!!! catalyst: Stage build aborting due to error.
[/quote]
-- 
Steffen Hoenig <steffen.hoenig@amd.com>
AMD Saxony LLC & Co. KG


-- 
gentoo-catalyst@gentoo.org mailing list

Re: [gentoo-catalyst] Cannot get catalyst to work

[Guy Martin]

[-- Attachment #1: Type: text/plain, Size: 348 bytes --]


This is a common issue.

You should provide your .spec file but I'm quite sure your profile variable is wrong.
It should be something like this :

profile: default-linux/x86/2005.0

The documentation is there :
http://www.gentoo.org/proj/en/releng/catalyst/2.x/reference.xml

-- 
Guy Martin
Gentoo Linux - HPPA port Lead / IPv6 team

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-catalyst] Cannot get catalyst to work

[Steffen Hoenig]

Am Dienstag, den 05.07.2005, 15:01 +0200 schrieb Guy Martin:
> This is a common issue.
> 
> You should provide your .spec file but I'm quite sure your profile variable is wrong.
> It should be something like this :
> 
> profile: default-linux/x86/2005.0
> 
> The documentation is there :
> http://www.gentoo.org/proj/en/releng/catalyst/2.x/reference.xml
> 

Yeah, that solved the problem. 

Thank you very much for your interest and the fast response.

Greetings
-- 
Steffen Hoenig <steffen.hoenig@amd.com>
AMD Saxony LLC & Co. KG


-- 
gentoo-catalyst@gentoo.org mailing list

Re: [gentoo-catalyst] Cannot get catalyst to work

[Steffen Hoenig]

Am Dienstag, den 05.07.2005, 15:01 +0200 schrieb Guy Martin:
> This is a common issue.
> 
> You should provide your .spec file but I'm quite sure your profile variable is wrong.
> It should be something like this :
> 
> profile: default-linux/x86/2005.0
> 
> The documentation is there :
> http://www.gentoo.org/proj/en/releng/catalyst/2.x/reference.xml
> 

Visiting the reference (link above) once more, I know why I trapped into
the wrong syntax. The HOWTO it-self uses different values for the
"profile" . Maybe someone should give the writer of that document the
advice, that both syntax doesn't seem to be equal.

[quote]
profile What system profile Catalyst uses to build the media. It can
take values such as default-x86-2004.0 [that DOESN'T work for me] or
default-linux/x86/2004.0.[that does!]
[/quote]

greetings
-- 
Steffen Hoenig <steffen.hoenig@amd.com>
AMD Saxony LLC & Co. KG


-- 
gentoo-catalyst@gentoo.org mailing list

Re: [gentoo-catalyst] Cannot get catalyst to work

[Chris Gianelloni]

[-- Attachment #1: Type: text/plain, Size: 1664 bytes --]

On Wed, 2005-07-06 at 18:06 +0200, Steffen Hoenig wrote:
> Am Dienstag, den 05.07.2005, 15:01 +0200 schrieb Guy Martin:
> > This is a common issue.
> > 
> > You should provide your .spec file but I'm quite sure your profile variable is wrong.
> > It should be something like this :
> > 
> > profile: default-linux/x86/2005.0
> > 
> > The documentation is there :
> > http://www.gentoo.org/proj/en/releng/catalyst/2.x/reference.xml
> > 
> 
> Visiting the reference (link above) once more, I know why I trapped into
> the wrong syntax. The HOWTO it-self uses different values for the
> "profile" . Maybe someone should give the writer of that document the
> advice, that both syntax doesn't seem to be equal.
> 
> [quote]
> profile What system profile Catalyst uses to build the media. It can
> take values such as default-x86-2004.0 [that DOESN'T work for me] or
> default-linux/x86/2004.0.[that does!]
> [/quote]

Actually, both are correct.  However, you can't point to a non-existent
profile.  The default-x86-2004.0 profile was removed some time ago.

Also, that document has not been updated in a long, long time.  I
suggest using the template spec files that are installed when you
install catalyst via USE="doc" rather than the online version.  Also,
the online version you are using is for catalyst 2, not catalyst 1.
Right now, they're the same, but in the future, they will change.

The correct link for catalyst 1, which is what you are using, is:
http://www.gentoo.org/proj/en/releng/catalyst/1.x/reference.xml

-- 
Chris Gianelloni
Release Engineering - Strategic Lead/QA Manager
Games - Developer
Gentoo Linux

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]