[gentoo-binhost-autobuilds] [binhost amd64-default-17.1] Update succeeded

[binhost@demeter.amd64.dev.gentoo.org]

Binhost amd64-default-17.1 update succeeded


 * 
 * Press Ctrl-C to Stop
 * 
 * None of the installed packages claim the file(s).
 * 
 * Package 'app-alternatives/sh-0' merged despite file collisions. If
 * necessary, refer to your elog messages for the whole content of the
 * above message.
 * Messages for package app-alternatives/awk-4:
 * This package will overwrite one or more files that may belong to other
 * packages (see list below). You can use a command such as `portageq
 * owners / <filename>` to identify the installed package that owns a
 * file. If portageq reports that only one package owns a file then do
 * NOT file a bug report. A bug report is only useful if it identifies at
 * least two or more packages that are known to install the same file(s).
 * If a collision occurs and you can not explain where the file came from
 * then you should simply ignore the collision since there is not enough
 * information to determine if a real problem exists. Please do NOT file
 * a bug report at https://bugs.gentoo.org/ unless you report exactly
 * which two packages install the same file(s). See
 * https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
 * to solve the problem. And once again, please do NOT file a bug report
 * unless you have completely understood the above message.
 * 
 * Detected file collision(s):
 * 
 * 	/usr/bin/awk
 * 	/bin/awk
 * 
 * Searching all installed packages for file collisions...
 * 
 * Press Ctrl-C to Stop
 * 
 * None of the installed packages claim the file(s).
 * 
 * Package 'app-alternatives/awk-4' merged despite file collisions. If
 * necessary, refer to your elog messages for the whole content of the
 * above message.
 * Messages for package dev-lang/perl-5.36.0-r1:
 * UPDATE THE PERL MODULES:
 * After updating dev-lang/perl the installed Perl modules
 * have to be re-installed. In most cases, this is done automatically
 * by the package manager, but subsequent steps are still recommended
 * to ensure system consistency.
 * 
 * You should start with a depclean to remove any unused perl dependencies
 * that may confuse portage in future. Regular depcleans are also encouraged
 * as part of your regular update cycle, as that will keep perl upgrades working.
 * Recommended: emerge --depclean -va
 * 
 * You should then call perl-cleaner to clean up any old files and trigger any
 * remaining rebuilds portage may have missed.
 * Use: perl-cleaner --all
 * Messages for package sys-libs/pam-1.5.2-r3:
 * Some software with pre-loaded PAM libraries might experience
 * warnings or failures related to missing symbols and/or versions
 * after any update. While unfortunate this is a limit of the
 * implementation of PAM and the software, and it requires you to
 * restart the software manually after the update.
 * 
 * You can get a list of such software running a command like
 *   lsof / | grep -E -i 'del.*libpam\.so'
 * 
 * Alternatively, simply reboot your system.
 * Messages for package app-alternatives/bc-0:
 * This package will overwrite one or more files that may belong to other
 * packages (see list below). You can use a command such as `portageq
 * owners / <filename>` to identify the installed package that owns a
 * file. If portageq reports that only one package owns a file then do
 * NOT file a bug report. A bug report is only useful if it identifies at
 * least two or more packages that are known to install the same file(s).
 * If a collision occurs and you can not explain where the file came from
 * then you should simply ignore the collision since there is not enough
 * information to determine if a real problem exists. Please do NOT file
 * a bug report at https://bugs.gentoo.org/ unless you report exactly
 * which two packages install the same file(s). See
 * https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
 * to solve the problem. And once again, please do NOT file a bug report
 * unless you have completely understood the above message.
 * 
 * Detected file collision(s):
 * 
 * 	/usr/bin/bc
 * 	/usr/bin/dc
 * 
 * Searching all installed packages for file collisions...
 * 
 * Press Ctrl-C to Stop
 * 
 * None of the installed packages claim the file(s).
 * 
 * Package 'app-alternatives/bc-0' merged despite file collisions. If
 * necessary, refer to your elog messages for the whole content of the
 * above message.
 * Messages for package dev-lang/rust-1.65.0:
 * Rust installs a helper script for calling GDB and LLDB,
 * for your convenience it is installed under /usr/bin/rust-{gdb,lldb}-1.65.0.
 * Messages for package www-servers/apache-2.4.54-r6:
 * 
 * Selected default MPM: prefork
 * 
 * Please note that you need SysV IPC support in your kernel.
 * Make sure CONFIG_SYSVIPC=y is set.
 * 
 * Attention: cgi and cgid modules are now handled via APACHE2_MODULES flags
 * in make.conf. Make sure to enable those in order to compile them.
 * In general, you should use 'cgid' with threaded MPMs and 'cgi' otherwise.
 * Messages for package dev-python/lxml-4.9.1:
 * Install additional packages for optional runtime features:
 *   dev-python/beautifulsoup4 for Support for BeautifulSoup as a parser backend
 * Messages for package app-text/asciidoc-10.2.0:
 * Install additional packages for optional runtime features:
 *   media-sound/lilypond and virtual/imagemagick-tools for music filter support
 *   dev-util/source-highlight and dev-python/pygments and app-text/highlight for source filter support
 *   media-gfx/graphviz for graphviz filter support
 * Messages for package dev-python/jinja-3.1.2:
 * For i18n support, please emerge dev-python/Babel.
 * Messages for package dev-libs/glib-2.74.4:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Messages for package app-alternatives/lex-0-r1:
 * This package will overwrite one or more files that may belong to other
 * packages (see list below). You can use a command such as `portageq
 * owners / <filename>` to identify the installed package that owns a
 * file. If portageq reports that only one package owns a file then do
 * NOT file a bug report. A bug report is only useful if it identifies at
 * least two or more packages that are known to install the same file(s).
 * If a collision occurs and you can not explain where the file came from
 * then you should simply ignore the collision since there is not enough
 * information to determine if a real problem exists. Please do NOT file
 * a bug report at https://bugs.gentoo.org/ unless you report exactly
 * which two packages install the same file(s). See
 * https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
 * to solve the problem. And once again, please do NOT file a bug report
 * unless you have completely understood the above message.
 * 
 * Detected file collision(s):
 * 
 * 	/usr/bin/lex
 * 
 * Searching all installed packages for file collisions...
 * 
 * Press Ctrl-C to Stop
 * 
 * None of the installed packages claim the file(s).
 * 
 * Package 'app-alternatives/lex-0-r1' merged despite file collisions. If
 * necessary, refer to your elog messages for the whole content of the
 * above message.
 * Messages for package app-alternatives/yacc-1-r2:
 * This package will overwrite one or more files that may belong to other
 * packages (see list below). You can use a command such as `portageq
 * owners / <filename>` to identify the installed package that owns a
 * file. If portageq reports that only one package owns a file then do
 * NOT file a bug report. A bug report is only useful if it identifies at
 * least two or more packages that are known to install the same file(s).
 * If a collision occurs and you can not explain where the file came from
 * then you should simply ignore the collision since there is not enough
 * information to determine if a real problem exists. Please do NOT file
 * a bug report at https://bugs.gentoo.org/ unless you report exactly
 * which two packages install the same file(s). See
 * https://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how
 * to solve the problem. And once again, please do NOT file a bug report
 * unless you have completely understood the above message.
 * 
 * Detected file collision(s):
 * 
 * 	/usr/bin/yacc
 * 
 * Searching all installed packages for file collisions...
 * 
 * Press Ctrl-C to Stop
 * 
 * None of the installed packages claim the file(s).
 * 
 * Package 'app-alternatives/yacc-1-r2' merged despite file collisions.
 * If necessary, refer to your elog messages for the whole content of the
 * above message.
 * Messages for package sys-devel/llvm-15.0.6:
 * You can find additional opt-viewer utility scripts in:
 *   /usr/lib/llvm/15/share/opt-viewer
 * To use these scripts, you will need Python along with the following
 * packages:
 *   dev-python/pygments (for opt-viewer)
 *   dev-python/pyyaml (for all of them)
 * Messages for package sys-devel/clang-15.0.6:
 * You can find additional utility scripts in:
 *   /usr/lib/llvm/15/share/clang
 * Some of them are vim integration scripts (with instructions inside).
 * The run-clang-tidy.py script requires the following additional package:
 *   dev-python/pyyaml
 * Messages for package net-fs/cifs-utils-6.15-r1:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * setuid use flag was dropped due to multiple security implications
 * such as CVE-2009-2948, CVE-2011-3585 and CVE-2012-1586
 * You are free to set setuid flags by yourself
 * Messages for package app-misc/tracker-3.4.2:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Messages for package perl-core/Encode-3.120.0:
 * Unable to establish //usr/bin/encguess symlink
 * Unable to establish //usr/share/man/man1/encguess.1.bz2 symlink
 * Messages for package perl-core/CPAN-2.290.0-r1:
 * Removing dead symlink //usr/bin/cpan-mirrors
 * Removing dead symlink //usr/share/man/man1/cpan-mirrors.1.bz2
 * Messages for package dev-vcs/git-2.38.2:
 * Some scripts require additional dependencies:
 *   dev-util/quilt for git-quiltimport
 * Messages for package sys-apps/portage-3.0.41-r2:
 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Messages for package media-sound/pulseaudio-daemon-16.1-r3:
 * You have enabled bluetooth USE flag for pulseaudio. Daemon will now handle
 * bluetooth Headset (HSP HS and HSP AG) and Handsfree (HFP HF) profiles using
 * native headset backend by default. This can be selectively disabled
 * via runtime configuration arguments to module-bluetooth-discover
 * in /etc/pulse/default.pa
 * To disable HFP HF append enable_native_hfp_hf=false
 * To disable HSP HS append enable_native_hsp_hs=false
 * To disable HSP AG append headset=auto or headset=ofono
 * (note this does NOT require enabling USE ofono)
 * 
 * GStreamer-based RTP implementation modile enabled.
 * To use OPUS payload install media-plugins/gst-plugins-opus
 * and add enable_opus=1 argument to module-rtp-send
 * 
 * Pulseaudio autospawn by client library is no longer enabled when systemd is available.
 * It's recommended to start pulseaudio via its systemd user units:
 * 
 *   systemctl --user enable pulseaudio.service pulseaudio.socket
 * 
 * Root user can change system default configuration for all users:
 * 
 *   systemctl --global enable pulseaudio.service pulseaudio.socket
 * 
 * If you would like to enable autospawn by client library, edit autospawn flag in /etc/pulse/client.conf like this:
 * 
 *   autospawn = yes
 * 
 * The change from autospawn to user units will take effect after restarting.
 * 
 * PulseAudio can be enhanced by installing the following:
 *   sys-auth/rtkit for restricted realtime capabilities via D-Bus
 * Messages for package app-text/texlive-core-2021-r5:
 * 
 * If you have configuration files in /etc/texmf to merge,
 * please update them and run /usr/sbin/texmf-update.
 * 
 * If you are migrating from an older TeX distribution
 * Please make sure you have read:
 * https://wiki.gentoo.org/wiki/Project:TeX/Tex_Live_Migration_Guide
 * in order to avoid possible problems
 * Messages for package media-libs/gegl-0.4.38-r1:
 * Install additional packages for optional runtime features:
 *   media-gfx/graphviz for 'Show Image Graph' under GIMP[debug] menu 'File - Debug'





































































 * Regenerating GNU info directory index...
 * Processed 133 info files.

 * IMPORTANT: 4 config files in '/etc' need updating.

!!! existing preserved libs:
>>> package: gnome-base/nautilus-43.1
 *  - /usr/lib64/libnautilus-extension.so.1
 *  - /usr/lib64/libnautilus-extension.so.1.5.0
 *      used by /usr/lib64/nautilus/extensions-3.0/libnautilus-brasero-extension.so (app-cdr/brasero-3.12.3)
Use emerge @preserved-rebuild to rebuild packages using these libraries
 * See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS
 * sections of the emerge man page to learn how to update config files.

 * IMPORTANT: 24 news items need reading for repository 'gentoo'.
 * Use eselect news read to view new items.

 * After world updates, it is important to remove obsolete packages with
 * emerge --depclean. Refer to `man emerge` for more information.

 * Always study the list of packages to be cleaned for any obvious
 * mistakes. Packages that are part of the world set will always
 * be kept.  They can be manually added to this set with
 * `emerge --noreplace <atom>`.  Packages that are listed in
 * package.provided (see portage(5)) will be removed by
 * depclean, even if they are part of the world set.
 * 
 * As a safety measure, depclean will not remove any packages
 * unless *all* required dependencies have been resolved.  As a
 * consequence of this, it often becomes necessary to run 
 * `emerge --update --newuse --deep @world` prior to depclean.

Calculating dependencies  .\b\b... done!
>>> Calculating removal order...

 net-libs/libgrss
    selected: 0.7.0 
   protected: none 
     omitted: none 

 net-libs/rest
    selected: 0.8.1-r1 
   protected: none 
     omitted: 0.9.1 

 sys-devel/clang-runtime
    selected: 15.0.5 
   protected: none 
     omitted: 15.0.6 

 gnome-extra/gnome-browser-connector
    selected: 42.1 
   protected: none 
     omitted: none 

 sys-devel/binutils
    selected: 2.38-r2 
   protected: none 
     omitted: 2.39-r4 

 app-accessibility/at-spi2-atk
    selected: 2.46.0 
   protected: none 
     omitted: none 

 dev-lang/spidermonkey
    selected: 91.13.0-r1 
   protected: none 
     omitted: 102.6.0 

 sys-libs/compiler-rt
    selected: 15.0.5 
   protected: none 
     omitted: 15.0.6 

 sys-libs/compiler-rt-sanitizers
    selected: 15.0.5 
   protected: none 
     omitted: 15.0.6 

 media-video/wireplumber
    selected: 0.4.12-r1 
   protected: none 
     omitted: none 

 dev-lang/lua
    selected: 5.4.4-r103 
   protected: none 
     omitted: none 

 media-video/pipewire
    selected: 0.3.61 
   protected: none 
     omitted: none 

 media-libs/fdk-aac
    selected: 2.0.2 
   protected: none 
     omitted: none 

 media-libs/libldac
    selected: 2.0.2.3-r1 
   protected: none 
     omitted: none 

 media-libs/libfreeaptx
    selected: 0.1.1-r1 
   protected: none 
     omitted: none 

 app-eselect/eselect-lua
    selected: 4-r1 
   protected: none 
     omitted: none 

 net-im/telepathy-mission-control
    selected: 5.16.6 
   protected: none 
     omitted: none 

 net-libs/telepathy-glib
    selected: 0.24.2 
   protected: none 
     omitted: none 

All selected packages: =app-eselect/eselect-lua-4-r1 =sys-devel/binutils-2.38-r2 =media-video/pipewire-0.3.61 =media-libs/libldac-2.0.2.3-r1 =dev-lang/spidermonkey-91.13.0-r1 =net-libs/rest-0.8.1-r1 =app-accessibility/at-spi2-atk-2.46.0 =sys-libs/compiler-rt-15.0.5 =media-video/wireplumber-0.4.12-r1 =sys-libs/compiler-rt-sanitizers-15.0.5 =dev-lang/lua-5.4.4-r103 =net-libs/libgrss-0.7.0 =media-libs/libfreeaptx-0.1.1-r1 =net-libs/telepathy-glib-0.24.2 =sys-devel/clang-runtime-15.0.5 =gnome-extra/gnome-browser-connector-42.1 =media-libs/fdk-aac-2.0.2 =net-im/telepathy-mission-control-5.16.6

>>> 'Selected' packages are slated for removal.
>>> 'Protected' and 'omitted' packages will not be removed.

>>> Waiting 5 seconds before starting...
>>> (Control-C to abort)...
>>> Unmerging in: 5 4 3 2 1
>>> Unmerging (1 of 18) net-libs/libgrss-0.7.0...
>>> Unmerging (2 of 18) net-libs/rest-0.8.1-r1...
>>> Unmerging (3 of 18) sys-devel/clang-runtime-15.0.5...
>>> Unmerging (4 of 18) gnome-extra/gnome-browser-connector-42.1...
>>> Unmerging (5 of 18) sys-devel/binutils-2.38-r2...
>>> Unmerging (6 of 18) app-accessibility/at-spi2-atk-2.46.0...
>>> Unmerging (7 of 18) dev-lang/spidermonkey-91.13.0-r1...
>>> Unmerging (8 of 18) sys-libs/compiler-rt-15.0.5...
>>> Unmerging (9 of 18) sys-libs/compiler-rt-sanitizers-15.0.5...
>>> Unmerging (10 of 18) media-video/wireplumber-0.4.12-r1...
>>> Unmerging (11 of 18) dev-lang/lua-5.4.4-r103...
>>> Unmerging (12 of 18) media-video/pipewire-0.3.61...
>>> Unmerging (13 of 18) media-libs/fdk-aac-2.0.2...
>>> Unmerging (14 of 18) media-libs/libldac-2.0.2.3-r1...
>>> Unmerging (15 of 18) media-libs/libfreeaptx-0.1.1-r1...
>>> Unmerging (16 of 18) app-eselect/eselect-lua-4-r1...
>>> Unmerging (17 of 18) net-im/telepathy-mission-control-5.16.6...
>>> Unmerging (18 of 18) net-libs/telepathy-glib-0.24.2...
Packages installed:   1138
Packages in world:    27
Packages in system:   48
Required packages:    1138
Number removed:       18

 * Regenerating GNU info directory index...
 * Processed 6 info files.

!!! existing preserved libs:
>>> package: gnome-base/nautilus-43.1
 *  - /usr/lib64/libnautilus-extension.so.1
 *  - /usr/lib64/libnautilus-extension.so.1.5.0
 *      used by /usr/lib64/nautilus/extensions-3.0/libnautilus-brasero-extension.so (app-cdr/brasero-3.12.3)
Use emerge @preserved-rebuild to rebuild packages using these libraries

 * IMPORTANT: 4 config files in '/etc' need updating.
 * See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS
 * sections of the emerge man page to learn how to update config files.

 * IMPORTANT: 24 news items need reading for repository 'gentoo'.
 * Use eselect news read to view new items.

Container binhost-amd64-x86-64-gnome exited successfully.



Full build log at /root/.tmp-binhost-amd64-default-17.1-update-1672481821