2008/2/4, ionut cucu <cuciferus@gmail.com>:
On Mon, 4 Feb 2008 09:26:57 +0000
Beso <givemesugarr@gmail.com> wrote:
> 2008/2/4, Beso <givemesugarr@gmail.com>:
> >
> >
> >
> > 2008/2/4, ionut cucu <cuciferus@gmail.com>:
> > >
> > > On Sun, 3 Feb 2008 15:49:47 +0000
> > > Beso <givemesugarr@gmail.com> wrote:
> > >
> > > > 2008/2/3, ionut cucu <cuciferus@gmail.com>:
> > > > >
> > > > > On Sun, 3 Feb 2008 13:55:56 +0000
> > > > > Beso <givemesugarr@gmail.com> wrote:
> > > > >
> > > > > > 2008/2/3, ionut cucu <cuciferus@gmail.com>:
> > > > > > >
> > > > > > > Hi List,
> > > > > > > I've just bought a new laptop Acer 5715Z and I've have the
> > > > > > > following issue the processor overheats until the laptop
> > > > > > > closes(100 degrees Celsius). This happened when I had two
> > > > > > > parallel emerges. So I went to the shop and changed it
> > > > > > > with another one, same model. This one can hold up to 3
> > > > > > > parallel emerges but it overheats when I'm watching a
> > > > > > > movie, again it reaches the 100 degrees limit. I'm I
> > > > > > > doing something wrong here? I'm I missing something (this
> > > > > > > is the first laptop I have) ?. Or just by coincidence
> > > > > > > this one is broken too. I've looked on the Internet but I
> > > > > > > hadn't found any similar issues. Thanks! --
> > > > > > > gentoo-amd64@lists.gentoo.org mailing list
> > > > > > >
> > > > > > > first: maybe the thermal isn't set right.
> > > > > > what does cat /proc/acpi/thermal_zone/THRM/trip_points
> > > > > > says?! mine is something like this:
> > > > > >
> > > > > > critical (S5): 105 C
> > > > > > passive: 76 C: tc1=3 tc2=1 tsp=150
> > > > > > devices=CPU0 active[0]: 67 C: devices= FN1
> > > > > > active[1]: 57 C: devices= FN2
> > > > > >
> > > > > > you might have different values but at least you should
> > > > > > have one active and one passive.
> > > > > I have only the critical level set
> > > > > > second: don't do parallel emerge if you're not sure that the
> > > > > > packages from one emerge don't collide with the ones from
> > > > > > the other. for example, knetworkmanager needs
> > > > > > networkmanager which needs dhcdb which needs dhclient. if
> > > > > > you emerge something that would emerge dhclient then you'd
> > > > > > emerge 2 times dhclient or you might risk one of the 2
> > > > > > emerges to fail because a dep hasn't yet been installed.
> > > > > > you could push up the number of processes to be build
> > > > > > together by increasing the makeopts for example to -j6 or
> > > > > > more. increase the number and see your processors loads.
> > > > > > the best number is the one that puts your processors to
> > > > > > about 80% of cpu so that you'd still have 20% of cpu power
> > > > > > to do other things. also add the niceness option so that
> > > > > > you don't see slowdowns when you compile and use some other
> > > > > > program.
> > > > > Well the parallel emerges are done just to load the cpu,
> > > > > after the main installation process, but thanks for the j6
> > > > > idea
> > > > > > third: have you installed acpi and acer-acpi?! i presume
> > > > > > that you've done it and you're starting both acpi and
> > > > > > acer-acpi at boot. anyway, the important thing is are the
> > > > > > trip_points. if you don't have them then you might need to
> > > > > > make a script to get the thermal temperature and to
> > > > > > slowdown manually the processor when it pushes too much up
> > > > > > the temperature.
> > > > > acer_acpi refuses to compile with some file missing
> > > > > error...will search the bugs later, but is it really
> > > > > necessary? if so could you please elaborate a little because
> > > > > I was under the impression that the fans were hardware
> > > > > controlled by default --
> > > > > gentoo-amd64@lists.gentoo.org mailing list
> > > >
> > > >
> > > > acer-acpi is usually necessary for acer notebooks to work well.
> > > > it is mandatory for hotkeys and other stuff and is necessary to
> > > > correct some acer's modifications in the acpi. so for what i
> > > > know acer-acpi is manadatory for acer notebooks as it is
> > > > asus-acpi on asus notebooks. try to see if everything fixes
> > > > after you install it (try unmasking newer versions if you
> > > > cannot install stable ones). the fans are ususally board
> > > > controlled as it is the passive mode that reduces the cpu
> > > > speed, but they can be forced via scripts.
> > > >
> > > >
> > > >
> > > >
> > > Unfortunately asus_acpi doesn't compile
> > > (http://bugs.gentoo.org/show_bug.cgi?id=208577). So I'm just
> > > asking for the cooling process is it mandatory. The issue here is
> > > not some hotkeys but the temperature...I wish to know weather
> > > this one is broken to or not. From what I've read on the
> > > http://code.google.com/p/aceracpi/ this program/driver is mostly
> > > for the lcd, battery lifetime etc. But being the second laptop
> > > with the same issue makes me wonder...I wish i could compile
> > > this.... --
> > > gentoo-amd64@lists.gentoo.org mailing list
> > >
> > > well, we have a little problem about trip points, since the only
> > indicated there is the critical one and you don't have passive ones.
> > well, we'll need to do a little work on the manual scripts to have
> > the fan work and to be sure that the thermal won't reach critical
> > trip point where it would shutdown.
> > i'll take a look and post some scripts that should help. you'll
> > have to be sure that you have installed lm_sensors and cpufrequtils
> > and that you have compiled the cpufreq modules into the kernel or
> > as modules and you'll have them loaded at boot. we'll have to make
> > the processor slow down when the thermal goes too high. also i'd
> > like to know what are the capabilities of your processors:
> > a cat on the /proc/cpuinfo and then on cat
> > /proc/acpi/processor/CPU(x)/info where (x) is the number of the
> > core to know what sort of management it can support. you should
> > have cpu0 and cpu1 if you have a dualcore.
> >
> >
> > --
> > dott. ing. beso
>
> i forgot to mention the other files in the cpu and thermal directory.
> they would help setting up the scripts. also you'll
> need /dev/cpu/microcode, /dev/cpu/cpuid, /dev/cpu/msr, Intel MCE
> features, Intel core2/ newer xeon compiled directly into the kernel
> and not as modules. they're in the processor types and features of
> the kernel. also you'll need the following from the power management
> options:
> - acpi support
> ---> everything compiled into the kernel and not as modules with the
> exception of dock, asus extras, toshiba extras, acpi container, smart
> battery system which are not mandatory.
> - cpu frequency scaling
> [*] CPU Frequency
> scaling
>
> [*] Enable CPUfreq
> debugging
>
> <*> CPU frequency
> translation statistics
>
> [*] CPU frequency
> translation statistics
> details
> Default CPUFreq
> governor (userspace) --->
>
> <M> 'performance'
> governor
>
> <M> 'powersave'
> governor
>
> --- 'userspace' governor
> for userspace frequency scaling
>
> <M> 'ondemand' cpufreq
> policy governor
>
> <M> 'conservative' cpufreq
> governor
>
> --- CPUFreq processor
> drivers
>
> < > AMD Opteron/Athlon64
> PowerNow!
>
> <*> Intel Enhanced
> SpeedStep (deprecated)
>
> <*> ACPI Processor
> P-States driver
>
> --- shared
> options
>
> [*]
> /proc/acpi/processor/../performance interface (deprecated)
>
> after controlling this and recompiling if necessary reboot (if you've
> recompiled) and do another cat on the thermal trip points to see if
> it shows also other states. if it doesn't we will really have to
> impose the throttling manually when the temperature goes too high.
> we'll use the cpufreq governor to impose the speed when needed and
> then we'll impose throttling (processor suspension) when the thermal
> temp goes too high with it. if your pc supports limits and other speq
> steps we could have it lower the current state to a lower one to cool
> off a bit. but for this there's the need to know what your processor
> can do.
I've just done what you've advised me and ...already my CPU is cooling
down...but I've noticed the following: sensors only detects my CPU
sensor(souldn't there be others?, and yes I've ran sensors-detect), I
can;t seem to be able to to start fancontrol because pwmconfig can't
gind any pwm sensors. Also on you config I seem not to be able to
change my Cpu's freq with kLaptop.Thanks for the help so far!
--
gentoo-amd64@lists.gentoo.org mailing list
for klaptop, you have to first configure it. set everything to conservative, it should raise your processor speed based on your needs. be sure also to add cpufrequtils as a service at boot and to load the eventual modules at boot time by adding them to the /etc/modules.autoload/kernel-2.6 so that they load at boot. without cufrequtils and the modules (if you've build the stuff as modules and you've done it if you've used my config) you won't be able to switch. without rebooting you could open konsole and start cpufrequtils with /etc/init.d/cpufrequtils start and then add it with rc-update add cpufrequtils default and then modprobe cpufreq_powersave && modprobe cpufreq_conservative && modprobe cpufreq_performance. now you should be able to switch them with klaptop. don't use kpowersaved since it doesn't work anymore or at least on my pc it cannot find acpid started.
if you'd like a monitor for kde there are different solutions:
- one is superkaramba with some theme like aero-aio
- kima which is directly included into the kicker as an applet and can monitor thermal, processor temp, processor load, uptime, battery and processor and /proc speed. i prefer this solution since it's faster to see and never gets covered by apps letting me see always the state of the system.
for lm_sensors instead, is quite ok to not have fan control since the fan on a notebook is not usually connected to some control sensor but is controlled directly by acpi. on notebooks usually you might find some monitor for cpu core, for some removable media like pccards and nand devices like mmd. the only thing that is useful is the core processor monitor which gives you the temp of the core(s) and it lets you have an idea of how your processor works . remember that thermal temp might be different and usually is higher than core temp.
also some helpful utils for kde are: klipper (fabulous klipboard); kompose (osx kompose changer), ksynaptic (if you have synaptic or alps touchpads that usually get installed in notebooks), knetworkmanager + networkmanager and the new kde4 like kicker that includes a built-in search module that improves usability of kde. other useful kicker applets are the shutdown and block applets, the kmixer applet (this lets you remove from start kmix), the show desktop applet and the trash can applet.
also for full kde experience i suggest kaffeine + xine (not 1.1.10 since it has some problems with external linkage) and amarok + xine. install xft and cairo with svg and pdf flags and search for the font antialiasing wiki that was on xeffects if i remember right.
also ksplash-engine-moodin is wonderful for personalizing the ksplash and oxy-cursors from flameeyes-overlay are wonderful cursor themes.
if you like osx be sure to search for a baghira how to and on how to make kde identical to osx (don't use kxdocker, though). and before using compiz be aware that ati drivers don't work well with it. for tuning ati drivers visit phoronix forums and you'll have a lot of info about them.
--
dott. ing. beso