still you cannot use them at the same time you're using ndiswrapper.... for
what i know you cannot use bcm43xx or any other linux modules and
ndiswrapper with the same wireless interface at the same time.... but i
still may be wrong....

2007/10/9, Mark Haney <mhaney@ercbroadband.org>:
>
> Beso wrote:
> > if you load at boot bcm43xx as hal should do, you have to unload them
> before
> > using ndiswrapper. if you want to stop them from loading put:
> >
> > blacklist bcm43xx in this file:
> > /etc/modprobe.d/blacklist
> > and remember that you need also the firmware in /lib/firmware if you're
> > using the bcm43xx modules.
> >
>
> I don't have the bcm modules auto-loading at the moment, mainly so I can
> test them, however, I ran ndiswrapper just fine with those modules
> loaded (I loaded them manually).  Not that that makes any difference to
> the discussion, but it is more for your information that it can be done.
>
> Thanks again for all the help.
>
>
>
> --
> Recedite, plebes! Gero rem imperialem!
>
>
> Mark Haney
> Sr. Systems Administrator
> ERC Broadband
> (828) 350-2415
>
> Call (866) ERC-7110 for after hours support
> --
> gentoo-amd64@gentoo.org mailing list
>
>


-- 
dott. ing. beso