Re: [gentoo-amd64] Wireless Network adapter

[Beso <givemesugarr@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 4592 bytes --]

i have managed to compile with no problems the at76c503-0.16 with
linux-2.6.22-r8 on amd64 and managed to load the module without problems
with modprobe. the problem as what i have seen may be due to the fact that
you didn't compile your new kernel in /usr/src/linux. if the kernel is not
compiled the module wouldn't compile fine.
switch to the 0.16 version and try to build it and see if it builds.
unfortunately i don't have a way to verify it cause i don't have any hw with
wich to try.

2007/10/2, Andrew Long <jandrewlong@gmail.com>:
>
> I'm trying to use a Linksys WUSB11 2.8 adapter to get wireless internet
> on my computer. In the past, (I think it was when I was using x86, I
> have since switched to amd64 on the same box) I was able to use the
> at76c503 ebuild to get the drivers installed. When I try to build it I
> get the following error:
>
>
> make -C /usr/src/linux
> M=/var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1
> KERNELRELEASE=2.6.22-gentoo-r8 modules
> make[1]: Entering directory `/usr/src/linux-2.6.22-gentoo-r8'
> CC [M]
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.o
> CC [M]
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76_usbdfu.o
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
> In function 'ieee80211_to_eth':
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3599:
> error: 'struct sk_buff' has no member named 'mac'
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
> In function 'ieee80211_fixup':
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3653:
> error: 'struct sk_buff' has no member named 'mac'
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
> In function 'check_for_rx_frags':
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3732:
> warning: format '%p' expects type 'void *', but argument 5 has type
> 'sk_buff_data_t'
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3732:
> warning: format '%p' expects type 'void *', but argument 6 has type
> 'sk_buff_data_t'
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3769:
> warning: format '%p' expects type 'void *', but argument 5 has type
> 'sk_buff_data_t'
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3769:
> warning: format '%p' expects type 'void *', but argument 6 has type
> 'sk_buff_data_t'
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
> In function 'rx_monitor_mode':
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:4133:
> error: 'struct sk_buff' has no member named 'mac'
> make[2]: ***
> [/var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.o]
> Error 1
> make[2]: *** Waiting for unfinished jobs....
> make[1]: ***
> [_module_/var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1]
> Error 2
> make[1]: Leaving directory `/usr/src/linux-2.6.22-gentoo-r8'
> make: *** [modules] Error 2
> *
> * ERROR: net-wireless/at76c503a-0.14_beta1 failed.
> * Call stack:
> *   ebuild.sh, line 1654:   Called dyn_compile
> *   ebuild.sh, line 990:   Called qa_call 'src_compile'
> *   ebuild.sh, line 44:   Called src_compile
> *   ebuild.sh, line 1334:   Called linux-mod_src_compile
> *   linux-mod.eclass, line 516:   Called die
> *
> * Unable to make  KERNEL_PATH=/usr/src/linux all.
> * If you need support, post the topmost build error, and the call stack
> if relevant.
> * A complete build log is located at
> '/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/temp/build.log'.
> *
>
>
>
> I've also tried using the atmel module in the kernel (2.6.22-gentoo-r8
> ), but something is not working right. When I plug in the device, dmesg
> shows this:
>
> usb 5-3.4: new full speed USB device using ehci_hcd and address 4
> usb 5-3.4: configuration #1 chosen from 1 choice
>
>
>
> Are any of you using this adapter?  If so, were you able to use the
> ebuild to install the driver?
>
> Can you recommend another 802.11b adapter that works with amd64?
>
> I've also posted this at forums.gentoo.org, I'll reply to this if I get
> a solution there.
>
>
> Thanks,
> Andrew
>
> --
> gentoo-amd64@gentoo.org mailing list
>
>


-- 
dott. ing. beso

[-- Attachment #2: Type: text/html, Size: 5372 bytes --]