* Re: [gentoo-amd64] Network adopter driver
2011-09-08 12:12 [gentoo-amd64] Network adopter driver Mansour Al Akeel
@ 2011-09-07 16:41 ` Dale
2011-09-07 16:46 ` Mansour Al Akeel
2011-09-07 18:21 ` Pascal Flöschel
1 sibling, 1 reply; 10+ messages in thread
From: Dale @ 2011-09-07 16:41 UTC (permalink / raw
To: gentoo-amd64
Mansour Al Akeel wrote:
> I am trying to install the driver for the wireless adopter. It looks
> like it's Intel based:
>
>
> lspci
>
> 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
> 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
> 00:16.0 Communication controller [0780]: Intel Corporation Cougar Point HECI Controller #1 [8086:1c3a] (rev 04)
> 00:1a.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
> 00:1b.0 Audio device [0403]: Intel Corporation Cougar Point High Definition Audio Controller [8086:1c20] (rev 05)
> 00:1c.0 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 1 [8086:1c10] (rev b5)
> 00:1c.1 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 2 [8086:1c12] (rev b5)
> 00:1c.3 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 4 [8086:1c16] (rev b5)
> 00:1c.5 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 6 [8086:1c1a] (rev b5)
> 00:1d.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
> 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05)
> 00:1f.2 SATA controller [0106]: Intel Corporation Cougar Point 6 port SATA AHCI Controller [8086:1c03] (rev 05)
> 00:1f.3 SMBus [0c05]: Intel Corporation Cougar Point SMBus Controller [8086:1c22] (rev 05)
> 02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [8086:008a] (rev 34)
> 03:00.0 USB Controller [0c03]: Fresco Logic FL1000G USB 3.0 Host Controller [1b73:1000] (rev 04)
> 04:00.0 Ethernet controller [0200]: Attansic Technology Corp. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0)
>
> The issue is, I still can not find the device. Am I using the correct
> driver ?
> < SNIP>>
>
> Any hint ?
>
> Thank you.
>
>
I always go here to find out which driver to use.
http://kmuto.jp/debian/hcl/
I did google and found this tho:
http://en.gentoo-wiki.com/wiki/MSI_CX640_16Y1
According to that you need the atl1c module. I also found this little
gem too:
http://forums.gentoo.org/viewtopic-t-816791-start-0.html
Notice the kernel line in one of the last posts. Maybe one of those
will help. If not, post back and maybe we can find something else.
Dale
:-) :-)
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-amd64] Network adopter driver
2011-09-07 16:41 ` Dale
@ 2011-09-07 16:46 ` Mansour Al Akeel
2011-09-07 17:52 ` Mansour Al Akeel
0 siblings, 1 reply; 10+ messages in thread
From: Mansour Al Akeel @ 2011-09-07 16:46 UTC (permalink / raw
To: gentoo-amd64
Dale,
thank you a lot. I did a lot of googling before posting and will
continue looking at the links you gave me.
Will post the results.
On Wed, Sep 7, 2011 at 12:41 PM, Dale <rdalek1967@gmail.com> wrote:
> Mansour Al Akeel wrote:
>>
>> I am trying to install the driver for the wireless adopter. It looks
>> like it's Intel based:
>>
>>
>> lspci
>>
>> 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core
>> Processor Family DRAM Controller [8086:0104] (rev 09)
>> 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation
>> Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
>> 00:16.0 Communication controller [0780]: Intel Corporation Cougar Point
>> HECI Controller #1 [8086:1c3a] (rev 04)
>> 00:1a.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced
>> Host Controller #2 [8086:1c2d] (rev 05)
>> 00:1b.0 Audio device [0403]: Intel Corporation Cougar Point High
>> Definition Audio Controller [8086:1c20] (rev 05)
>> 00:1c.0 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root
>> Port 1 [8086:1c10] (rev b5)
>> 00:1c.1 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root
>> Port 2 [8086:1c12] (rev b5)
>> 00:1c.3 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root
>> Port 4 [8086:1c16] (rev b5)
>> 00:1c.5 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root
>> Port 6 [8086:1c1a] (rev b5)
>> 00:1d.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced
>> Host Controller #1 [8086:1c26] (rev 05)
>> 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family
>> LPC Controller [8086:1c49] (rev 05)
>> 00:1f.2 SATA controller [0106]: Intel Corporation Cougar Point 6 port SATA
>> AHCI Controller [8086:1c03] (rev 05)
>> 00:1f.3 SMBus [0c05]: Intel Corporation Cougar Point SMBus Controller
>> [8086:1c22] (rev 05)
>> 02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N
>> 1030 [8086:008a] (rev 34)
>> 03:00.0 USB Controller [0c03]: Fresco Logic FL1000G USB 3.0 Host
>> Controller [1b73:1000] (rev 04)
>> 04:00.0 Ethernet controller [0200]: Attansic Technology Corp. AR8151 v2.0
>> Gigabit Ethernet [1969:1083] (rev c0)
>>
>> The issue is, I still can not find the device. Am I using the correct
>> driver ?
>> < SNIP>>
>>
>> Any hint ?
>>
>> Thank you.
>>
>>
>
> I always go here to find out which driver to use.
>
> http://kmuto.jp/debian/hcl/
>
> I did google and found this tho:
>
> http://en.gentoo-wiki.com/wiki/MSI_CX640_16Y1
>
> According to that you need the atl1c module. I also found this little gem
> too:
>
> http://forums.gentoo.org/viewtopic-t-816791-start-0.html
>
> Notice the kernel line in one of the last posts. Maybe one of those will
> help. If not, post back and maybe we can find something else.
>
> Dale
>
> :-) :-)
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-amd64] Network adopter driver
2011-09-07 16:46 ` Mansour Al Akeel
@ 2011-09-07 17:52 ` Mansour Al Akeel
2011-09-07 18:06 ` Mansour Al Akeel
2011-09-07 18:07 ` Mark Knecht
0 siblings, 2 replies; 10+ messages in thread
From: Mansour Al Akeel @ 2011-09-07 17:52 UTC (permalink / raw
To: gentoo-amd64
Dale,
atl1c is for ethernet and not for the wireless. What I looking for at
this point is the wireless.
On Wed, Sep 7, 2011 at 12:46 PM, Mansour Al Akeel
<mansour.alakeel@gmail.com> wrote:
> Dale,
> thank you a lot. I did a lot of googling before posting and will
> continue looking at the links you gave me.
> Will post the results.
>
>
> On Wed, Sep 7, 2011 at 12:41 PM, Dale <rdalek1967@gmail.com> wrote:
>> Mansour Al Akeel wrote:
>>>
>>> I am trying to install the driver for the wireless adopter. It looks
>>> like it's Intel based:
>>>
>>>
>>> lspci
>>>
>>> 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core
>>> Processor Family DRAM Controller [8086:0104] (rev 09)
>>> 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation
>>> Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
>>> 00:16.0 Communication controller [0780]: Intel Corporation Cougar Point
>>> HECI Controller #1 [8086:1c3a] (rev 04)
>>> 00:1a.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced
>>> Host Controller #2 [8086:1c2d] (rev 05)
>>> 00:1b.0 Audio device [0403]: Intel Corporation Cougar Point High
>>> Definition Audio Controller [8086:1c20] (rev 05)
>>> 00:1c.0 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root
>>> Port 1 [8086:1c10] (rev b5)
>>> 00:1c.1 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root
>>> Port 2 [8086:1c12] (rev b5)
>>> 00:1c.3 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root
>>> Port 4 [8086:1c16] (rev b5)
>>> 00:1c.5 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root
>>> Port 6 [8086:1c1a] (rev b5)
>>> 00:1d.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced
>>> Host Controller #1 [8086:1c26] (rev 05)
>>> 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family
>>> LPC Controller [8086:1c49] (rev 05)
>>> 00:1f.2 SATA controller [0106]: Intel Corporation Cougar Point 6 port SATA
>>> AHCI Controller [8086:1c03] (rev 05)
>>> 00:1f.3 SMBus [0c05]: Intel Corporation Cougar Point SMBus Controller
>>> [8086:1c22] (rev 05)
>>> 02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N
>>> 1030 [8086:008a] (rev 34)
>>> 03:00.0 USB Controller [0c03]: Fresco Logic FL1000G USB 3.0 Host
>>> Controller [1b73:1000] (rev 04)
>>> 04:00.0 Ethernet controller [0200]: Attansic Technology Corp. AR8151 v2.0
>>> Gigabit Ethernet [1969:1083] (rev c0)
>>>
>>> The issue is, I still can not find the device. Am I using the correct
>>> driver ?
>>> < SNIP>>
>>>
>>> Any hint ?
>>>
>>> Thank you.
>>>
>>>
>>
>> I always go here to find out which driver to use.
>>
>> http://kmuto.jp/debian/hcl/
>>
>> I did google and found this tho:
>>
>> http://en.gentoo-wiki.com/wiki/MSI_CX640_16Y1
>>
>> According to that you need the atl1c module. I also found this little gem
>> too:
>>
>> http://forums.gentoo.org/viewtopic-t-816791-start-0.html
>>
>> Notice the kernel line in one of the last posts. Maybe one of those will
>> help. If not, post back and maybe we can find something else.
>>
>> Dale
>>
>> :-) :-)
>>
>>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-amd64] Network adopter driver
2011-09-07 17:52 ` Mansour Al Akeel
@ 2011-09-07 18:06 ` Mansour Al Akeel
2011-09-07 18:20 ` Mark Knecht
2011-09-07 18:20 ` Andrew Long
2011-09-07 18:07 ` Mark Knecht
1 sibling, 2 replies; 10+ messages in thread
From: Mansour Al Akeel @ 2011-09-07 18:06 UTC (permalink / raw
To: gentoo-amd64
I pasted the output of "lspci -n" in http://kmuto.jp/debian/hcl/
00:00.0 0600: 8086:0104 (rev 09)
00:02.0 0300: 8086:0116 (rev 09)
00:16.0 0780: 8086:1c3a (rev 04)
00:1a.0 0c03: 8086:1c2d (rev 05)
00:1b.0 0403: 8086:1c20 (rev 05)
00:1c.0 0604: 8086:1c10 (rev b5)
00:1c.1 0604: 8086:1c12 (rev b5)
00:1c.3 0604: 8086:1c16 (rev b5)
00:1c.5 0604: 8086:1c1a (rev b5)
00:1d.0 0c03: 8086:1c26 (rev 05)
00:1f.0 0601: 8086:1c49 (rev 05)
00:1f.2 0106: 8086:1c03 (rev 05)
00:1f.3 0c05: 8086:1c22 (rev 05)
02:00.0 0280: 8086:008a (rev 34)
03:00.0 0c03: 1b73:1000 (rev 04)
04:00.0 0200: 1969:1083 (rev c0)
It shows that I need the driver "iwlagn" :
8086008a Yes Intel Corporation Centrino Wireless-N 1030 iwlagn v2.6.38-
for the wireless device. I do have it, and it's loaded but still the
device not seen by ifconfig !
On Wed, Sep 7, 2011 at 1:52 PM, Mansour Al Akeel
<mansour.alakeel@gmail.com> wrote:
> Dale,
> atl1c is for ethernet and not for the wireless. What I looking for at
> this point is the wireless.
>
>
> On Wed, Sep 7, 2011 at 12:46 PM, Mansour Al Akeel
> <mansour.alakeel@gmail.com> wrote:
>> Dale,
>> thank you a lot. I did a lot of googling before posting and will
>> continue looking at the links you gave me.
>> Will post the results.
>>
>>
>> On Wed, Sep 7, 2011 at 12:41 PM, Dale <rdalek1967@gmail.com> wrote:
>>> Mansour Al Akeel wrote:
>>>>
>>>> I am trying to install the driver for the wireless adopter. It looks
>>>> like it's Intel based:
>>>>
>>>>
>>>> lspci
>>>>
>>>> 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core
>>>> Processor Family DRAM Controller [8086:0104] (rev 09)
>>>> 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation
>>>> Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
>>>> 00:16.0 Communication controller [0780]: Intel Corporation Cougar Point
>>>> HECI Controller #1 [8086:1c3a] (rev 04)
>>>> 00:1a.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced
>>>> Host Controller #2 [8086:1c2d] (rev 05)
>>>> 00:1b.0 Audio device [0403]: Intel Corporation Cougar Point High
>>>> Definition Audio Controller [8086:1c20] (rev 05)
>>>> 00:1c.0 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root
>>>> Port 1 [8086:1c10] (rev b5)
>>>> 00:1c.1 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root
>>>> Port 2 [8086:1c12] (rev b5)
>>>> 00:1c.3 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root
>>>> Port 4 [8086:1c16] (rev b5)
>>>> 00:1c.5 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root
>>>> Port 6 [8086:1c1a] (rev b5)
>>>> 00:1d.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced
>>>> Host Controller #1 [8086:1c26] (rev 05)
>>>> 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family
>>>> LPC Controller [8086:1c49] (rev 05)
>>>> 00:1f.2 SATA controller [0106]: Intel Corporation Cougar Point 6 port SATA
>>>> AHCI Controller [8086:1c03] (rev 05)
>>>> 00:1f.3 SMBus [0c05]: Intel Corporation Cougar Point SMBus Controller
>>>> [8086:1c22] (rev 05)
>>>> 02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N
>>>> 1030 [8086:008a] (rev 34)
>>>> 03:00.0 USB Controller [0c03]: Fresco Logic FL1000G USB 3.0 Host
>>>> Controller [1b73:1000] (rev 04)
>>>> 04:00.0 Ethernet controller [0200]: Attansic Technology Corp. AR8151 v2.0
>>>> Gigabit Ethernet [1969:1083] (rev c0)
>>>>
>>>> The issue is, I still can not find the device. Am I using the correct
>>>> driver ?
>>>> < SNIP>>
>>>>
>>>> Any hint ?
>>>>
>>>> Thank you.
>>>>
>>>>
>>>
>>> I always go here to find out which driver to use.
>>>
>>> http://kmuto.jp/debian/hcl/
>>>
>>> I did google and found this tho:
>>>
>>> http://en.gentoo-wiki.com/wiki/MSI_CX640_16Y1
>>>
>>> According to that you need the atl1c module. I also found this little gem
>>> too:
>>>
>>> http://forums.gentoo.org/viewtopic-t-816791-start-0.html
>>>
>>> Notice the kernel line in one of the last posts. Maybe one of those will
>>> help. If not, post back and maybe we can find something else.
>>>
>>> Dale
>>>
>>> :-) :-)
>>>
>>>
>>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-amd64] Network adopter driver
2011-09-07 17:52 ` Mansour Al Akeel
2011-09-07 18:06 ` Mansour Al Akeel
@ 2011-09-07 18:07 ` Mark Knecht
1 sibling, 0 replies; 10+ messages in thread
From: Mark Knecht @ 2011-09-07 18:07 UTC (permalink / raw
To: gentoo-amd64
On Wed, Sep 7, 2011 at 10:52 AM, Mansour Al Akeel
<mansour.alakeel@gmail.com> wrote:
> Dale,
> atl1c is for ethernet and not for the wireless. What I looking for at
> this point is the wireless.
>
What does lspci -k tell you about the wireless device?
I'm not sure what that command would do if there's no driver for this
device in the kernel though. You might try that with the install CD if
your current kernel doesn't provide any good results.
HTH,
Mark
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-amd64] Network adopter driver
2011-09-07 18:06 ` Mansour Al Akeel
@ 2011-09-07 18:20 ` Mark Knecht
2011-09-07 18:20 ` Andrew Long
1 sibling, 0 replies; 10+ messages in thread
From: Mark Knecht @ 2011-09-07 18:20 UTC (permalink / raw
To: gentoo-amd64
On Wed, Sep 7, 2011 at 11:06 AM, Mansour Al Akeel
<mansour.alakeel@gmail.com> wrote:
> I pasted the output of "lspci -n" in http://kmuto.jp/debian/hcl/
>
> 00:00.0 0600: 8086:0104 (rev 09)
> 00:02.0 0300: 8086:0116 (rev 09)
> 00:16.0 0780: 8086:1c3a (rev 04)
> 00:1a.0 0c03: 8086:1c2d (rev 05)
> 00:1b.0 0403: 8086:1c20 (rev 05)
> 00:1c.0 0604: 8086:1c10 (rev b5)
> 00:1c.1 0604: 8086:1c12 (rev b5)
> 00:1c.3 0604: 8086:1c16 (rev b5)
> 00:1c.5 0604: 8086:1c1a (rev b5)
> 00:1d.0 0c03: 8086:1c26 (rev 05)
> 00:1f.0 0601: 8086:1c49 (rev 05)
> 00:1f.2 0106: 8086:1c03 (rev 05)
> 00:1f.3 0c05: 8086:1c22 (rev 05)
> 02:00.0 0280: 8086:008a (rev 34)
> 03:00.0 0c03: 1b73:1000 (rev 04)
> 04:00.0 0200: 1969:1083 (rev c0)
>
> It shows that I need the driver "iwlagn" :
> 8086008a Yes Intel Corporation Centrino Wireless-N 1030 iwlagn v2.6.38-
> for the wireless device. I do have it, and it's loaded but still the
> device not seen by ifconfig !
>
What is the output of
ifconfig -a
?
- Mark
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-amd64] Network adopter driver
2011-09-07 18:06 ` Mansour Al Akeel
2011-09-07 18:20 ` Mark Knecht
@ 2011-09-07 18:20 ` Andrew Long
1 sibling, 0 replies; 10+ messages in thread
From: Andrew Long @ 2011-09-07 18:20 UTC (permalink / raw
To: gentoo-amd64
On Wed, Sep 7, 2011 at 2:06 PM, Mansour Al Akeel
<mansour.alakeel@gmail.com> wrote:
>
> It shows that I need the driver "iwlagn" :
> 8086008a Yes Intel Corporation Centrino Wireless-N 1030 iwlagn v2.6.38-
> for the wireless device. I do have it, and it's loaded but still the
> device not seen by ifconfig !
>
>
>
>
Do you have a net.wlan0 entry in /etc/init.d? It should be a symbolic
link to net.lo . Have you tried:
# /etc/init.d/net.wlan0 start
?
Andrew
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-amd64] Network adopter driver
2011-09-08 12:12 [gentoo-amd64] Network adopter driver Mansour Al Akeel
2011-09-07 16:41 ` Dale
@ 2011-09-07 18:21 ` Pascal Flöschel
2011-09-07 19:00 ` Mansour Al Akeel
1 sibling, 1 reply; 10+ messages in thread
From: Pascal Flöschel @ 2011-09-07 18:21 UTC (permalink / raw
To: gentoo-amd64
[-- Attachment #1: Type: text/plain, Size: 732 bytes --]
According to http://de.gentoo-wiki.com/wiki/Iwlwifi#Firmware you have
the wrong firmware installed: Wireless-N 1030 needs
net-wireless/iwl6030-ucode
You can also have a look at http://en.gentoo-wiki.com/wiki/Iwlwifi to
check your setup.
On 08.09.2011 14:12, Mansour Al Akeel wrote:
> I am trying to install the driver for the wireless adopter. It looks
> like it's Intel based:
>
>
> lspci
>
> 02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [8086:008a] (rev 34)
>
> lsmod
>
> Module Size Used by
> iwlagn 214131 0
>
>
> I installed the firmware I believe is most approperiate for this
>
> emerge net-wireless/iwl5000-ucode
>
>
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4920 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [gentoo-amd64] Network adopter driver
2011-09-07 18:21 ` Pascal Flöschel
@ 2011-09-07 19:00 ` Mansour Al Akeel
0 siblings, 0 replies; 10+ messages in thread
From: Mansour Al Akeel @ 2011-09-07 19:00 UTC (permalink / raw
To: gentoo-amd64
installing net-wireless/iwl6030-ucode was the missing part.
Thank you all. I didn't see it on the page. Thank you Pascal.
On last thing about the touchpad, for another thread ;)
On Wed, Sep 7, 2011 at 2:21 PM, Pascal Flöschel <pascal@floeschel.de> wrote:
> According to http://de.gentoo-wiki.com/wiki/Iwlwifi#Firmware you have the
> wrong firmware installed: Wireless-N 1030 needs net-wireless/iwl6030-ucode
>
> You can also have a look at http://en.gentoo-wiki.com/wiki/Iwlwifi to check
> your setup.
>
>
>
> On 08.09.2011 14:12, Mansour Al Akeel wrote:
>>
>> I am trying to install the driver for the wireless adopter. It looks
>> like it's Intel based:
>>
>>
>> lspci
>>
>> 02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N
>> 1030 [8086:008a] (rev 34)
>>
>> lsmod
>>
>> Module Size Used by
>> iwlagn 214131 0
>>
>>
>> I installed the firmware I believe is most approperiate for this
>>
>> emerge net-wireless/iwl5000-ucode
>>
>>
>
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [gentoo-amd64] Network adopter driver
@ 2011-09-08 12:12 Mansour Al Akeel
2011-09-07 16:41 ` Dale
2011-09-07 18:21 ` Pascal Flöschel
0 siblings, 2 replies; 10+ messages in thread
From: Mansour Al Akeel @ 2011-09-08 12:12 UTC (permalink / raw
To: gentoo64-help
I am trying to install the driver for the wireless adopter. It looks
like it's Intel based:
lspci
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
00:16.0 Communication controller [0780]: Intel Corporation Cougar Point HECI Controller #1 [8086:1c3a] (rev 04)
00:1a.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
00:1b.0 Audio device [0403]: Intel Corporation Cougar Point High Definition Audio Controller [8086:1c20] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 1 [8086:1c10] (rev b5)
00:1c.1 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 2 [8086:1c12] (rev b5)
00:1c.3 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 4 [8086:1c16] (rev b5)
00:1c.5 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 6 [8086:1c1a] (rev b5)
00:1d.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation Cougar Point 6 port SATA AHCI Controller [8086:1c03] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation Cougar Point SMBus Controller [8086:1c22] (rev 05)
02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1030 [8086:008a] (rev 34)
03:00.0 USB Controller [0c03]: Fresco Logic FL1000G USB 3.0 Host Controller [1b73:1000] (rev 04)
04:00.0 Ethernet controller [0200]: Attansic Technology Corp. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0)
The issue is, I still can not find the device. Am I using the correct
driver ?
lsmod
Module Size Used by
iwlagn 214131 0
snd_seq_oss 30332 0
snd_seq_midi_event 5132 1 snd_seq_oss
snd_seq 50911 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 5157 2 snd_seq_oss,snd_seq
snd_pcm_oss 42125 0
snd_mixer_oss 14843 1 snd_pcm_oss
dm_mod 62167 0
btusb 10868 2
bluetooth 73126 5 btusb
snd_hda_codec_hdmi 24272 1
snd_hda_codec_realtek 320201 1
i915 299519 1
snd_hda_intel 23410 0
drm_kms_helper 26716 1 i915
snd_hda_codec 76542 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
drm 166258 2 i915,drm_kms_helper
snd_hwdep 5996 1 snd_hda_codec
atl1c 31239 0
i2c_algo_bit 6488 1 i915
snd_pcm 68666 4 snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
ehci_hcd 36965 0
mac80211 177747 1 iwlagn
snd_timer 18773 2 snd_seq,snd_pcm
video 11475 1 i915
snd 56935 12 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
usbcore 123292 2 btusb,ehci_hcd
intel_agp 10585 1 i915
cfg80211 143366 2 iwlagn,mac80211
soundcore 5359 1 snd
intel_gtt 13886 3 i915,intel_agp
snd_page_alloc 6625 2 snd_hda_intel,snd_pcm
backlight 4232 1 video
agpgart 25761 3 drm,intel_agp,intel_gtt
i2c_i801 7620 0
sg 26942 0
wmi 8002 0
battery 10387 0
ac 3163 0
I installed the firmware I believe is most approperiate for this
emerge net-wireless/iwl5000-ucode
Still ifconfig shows:
eth1 Link encap:Ethernet HWaddr 14:da:e9:17:4a:e1
inet addr:192.168.0.56 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:477 errors:0 dropped:3 overruns:0 frame:0
TX packets:100 errors:0 dropped:0 overruns:0 carrier:1
collisions:0 txqueuelen:1000
RX bytes:91180 (89.0 KiB) TX bytes:9188 (8.9 KiB)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:100 errors:0 dropped:0 overruns:0 frame:0
TX packets:100 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7688 (7.5 KiB) TX bytes:7688 (7.5 KiB)
Any hint ?
Thank you.
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2011-09-07 19:00 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-09-08 12:12 [gentoo-amd64] Network adopter driver Mansour Al Akeel
2011-09-07 16:41 ` Dale
2011-09-07 16:46 ` Mansour Al Akeel
2011-09-07 17:52 ` Mansour Al Akeel
2011-09-07 18:06 ` Mansour Al Akeel
2011-09-07 18:20 ` Mark Knecht
2011-09-07 18:20 ` Andrew Long
2011-09-07 18:07 ` Mark Knecht
2011-09-07 18:21 ` Pascal Flöschel
2011-09-07 19:00 ` Mansour Al Akeel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox