It's device 008 on bus 003. I tried /dev/bus/003/008, and got nothing. Any
more ideas?

Thanks,
-Peter

On 8/13/06, Richard Freeman <rich@thefreemanclan.net> wrote:
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Peter Davoust wrote:
> > Hmmmm.... I see no ttyUSB when I do ls /dev/tty*. Is there anywhere else
> > it could be?
> >
>
> Check dmesg when you plug it in - is it detected?
>
> Try checking out lsusb - can you figure out what driver is needed?
>
> Make sure you have CONFIG_USB_SERIAL set in your kernel.  You probably
> also need the appropriate driver for your adapter.  I have PL2303 set
> for mine.  Here is my lsusb output for the serial ports:
>
> Bus 002 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial
> Port
> Bus 002 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial
> Port
>
> If the kernel doesn't have USB_SERIAL support enabled you definitely
> won't get a ttyUSB device.  You also need hotplug properly configured,
> but that should pretty-much work out of the box with gentoo.  You might
> need to tweak it if you have more than one and want to ensure it gets
> the same port each time (wouldn't do to have my two mythtv satellite
> boxes getting random assignments every time I reboot).
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.5 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iD8DBQFE3pWcG4/rWKZmVWkRAtfeAJ9f3OqapDopnCMngbAqOD4Rq7s4hwCdEG1V
> 4YLVEcarg8qgDvPD0A2Sxgk=
> =NL/L
> -----END PGP SIGNATURE-----
>
>
>