* [gentoo-amd64] Wireless Network adapter
@ 2007-10-02 7:24 Andrew Long
2007-10-02 9:17 ` Beso
0 siblings, 1 reply; 4+ messages in thread
From: Andrew Long @ 2007-10-02 7:24 UTC (permalink / raw
To: gentoo-amd64
I'm trying to use a Linksys WUSB11 2.8 adapter to get wireless internet
on my computer. In the past, (I think it was when I was using x86, I
have since switched to amd64 on the same box) I was able to use the
at76c503 ebuild to get the drivers installed. When I try to build it I
get the following error:
make -C /usr/src/linux
M=/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1
KERNELRELEASE=2.6.22-gentoo-r8 modules
make[1]: Entering directory `/usr/src/linux-2.6.22-gentoo-r8'
CC [M]
/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.o
CC [M]
/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76_usbdfu.o
/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
In function 'ieee80211_to_eth':
/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3599:
error: 'struct sk_buff' has no member named 'mac'
/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
In function 'ieee80211_fixup':
/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3653:
error: 'struct sk_buff' has no member named 'mac'
/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
In function 'check_for_rx_frags':
/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3732:
warning: format '%p' expects type 'void *', but argument 5 has type
'sk_buff_data_t'
/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3732:
warning: format '%p' expects type 'void *', but argument 6 has type
'sk_buff_data_t'
/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3769:
warning: format '%p' expects type 'void *', but argument 5 has type
'sk_buff_data_t'
/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3769:
warning: format '%p' expects type 'void *', but argument 6 has type
'sk_buff_data_t'
/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
In function 'rx_monitor_mode':
/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:4133:
error: 'struct sk_buff' has no member named 'mac'
make[2]: ***
[/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.o]
Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: ***
[_module_/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1]
Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.22-gentoo-r8'
make: *** [modules] Error 2
*
* ERROR: net-wireless/at76c503a-0.14_beta1 failed.
* Call stack:
* ebuild.sh, line 1654: Called dyn_compile
* ebuild.sh, line 990: Called qa_call 'src_compile'
* ebuild.sh, line 44: Called src_compile
* ebuild.sh, line 1334: Called linux-mod_src_compile
* linux-mod.eclass, line 516: Called die
*
* Unable to make KERNEL_PATH=/usr/src/linux all.
* If you need support, post the topmost build error, and the call stack
if relevant.
* A complete build log is located at
'/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/temp/build.log'.
*
I've also tried using the atmel module in the kernel (2.6.22-gentoo-r8
), but something is not working right. When I plug in the device, dmesg
shows this:
usb 5-3.4: new full speed USB device using ehci_hcd and address 4
usb 5-3.4: configuration #1 chosen from 1 choice
Are any of you using this adapter? If so, were you able to use the
ebuild to install the driver?
Can you recommend another 802.11b adapter that works with amd64?
I've also posted this at forums.gentoo.org, I'll reply to this if I get
a solution there.
Thanks,
Andrew
--
gentoo-amd64@gentoo.org mailing list
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [gentoo-amd64] Wireless Network adapter
2007-10-02 7:24 [gentoo-amd64] Wireless Network adapter Andrew Long
@ 2007-10-02 9:17 ` Beso
2007-10-02 19:02 ` Andrew Long
0 siblings, 1 reply; 4+ messages in thread
From: Beso @ 2007-10-02 9:17 UTC (permalink / raw
To: gentoo-amd64
[-- Attachment #1: Type: text/plain, Size: 4592 bytes --]
i have managed to compile with no problems the at76c503-0.16 with
linux-2.6.22-r8 on amd64 and managed to load the module without problems
with modprobe. the problem as what i have seen may be due to the fact that
you didn't compile your new kernel in /usr/src/linux. if the kernel is not
compiled the module wouldn't compile fine.
switch to the 0.16 version and try to build it and see if it builds.
unfortunately i don't have a way to verify it cause i don't have any hw with
wich to try.
2007/10/2, Andrew Long <jandrewlong@gmail.com>:
>
> I'm trying to use a Linksys WUSB11 2.8 adapter to get wireless internet
> on my computer. In the past, (I think it was when I was using x86, I
> have since switched to amd64 on the same box) I was able to use the
> at76c503 ebuild to get the drivers installed. When I try to build it I
> get the following error:
>
>
> make -C /usr/src/linux
> M=/var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1
> KERNELRELEASE=2.6.22-gentoo-r8 modules
> make[1]: Entering directory `/usr/src/linux-2.6.22-gentoo-r8'
> CC [M]
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.o
> CC [M]
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76_usbdfu.o
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
> In function 'ieee80211_to_eth':
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3599:
> error: 'struct sk_buff' has no member named 'mac'
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
> In function 'ieee80211_fixup':
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3653:
> error: 'struct sk_buff' has no member named 'mac'
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
> In function 'check_for_rx_frags':
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3732:
> warning: format '%p' expects type 'void *', but argument 5 has type
> 'sk_buff_data_t'
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3732:
> warning: format '%p' expects type 'void *', but argument 6 has type
> 'sk_buff_data_t'
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3769:
> warning: format '%p' expects type 'void *', but argument 5 has type
> 'sk_buff_data_t'
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3769:
> warning: format '%p' expects type 'void *', but argument 6 has type
> 'sk_buff_data_t'
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
> In function 'rx_monitor_mode':
> /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:4133:
> error: 'struct sk_buff' has no member named 'mac'
> make[2]: ***
> [/var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.o]
> Error 1
> make[2]: *** Waiting for unfinished jobs....
> make[1]: ***
> [_module_/var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1]
> Error 2
> make[1]: Leaving directory `/usr/src/linux-2.6.22-gentoo-r8'
> make: *** [modules] Error 2
> *
> * ERROR: net-wireless/at76c503a-0.14_beta1 failed.
> * Call stack:
> * ebuild.sh, line 1654: Called dyn_compile
> * ebuild.sh, line 990: Called qa_call 'src_compile'
> * ebuild.sh, line 44: Called src_compile
> * ebuild.sh, line 1334: Called linux-mod_src_compile
> * linux-mod.eclass, line 516: Called die
> *
> * Unable to make KERNEL_PATH=/usr/src/linux all.
> * If you need support, post the topmost build error, and the call stack
> if relevant.
> * A complete build log is located at
> '/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/temp/build.log'.
> *
>
>
>
> I've also tried using the atmel module in the kernel (2.6.22-gentoo-r8
> ), but something is not working right. When I plug in the device, dmesg
> shows this:
>
> usb 5-3.4: new full speed USB device using ehci_hcd and address 4
> usb 5-3.4: configuration #1 chosen from 1 choice
>
>
>
> Are any of you using this adapter? If so, were you able to use the
> ebuild to install the driver?
>
> Can you recommend another 802.11b adapter that works with amd64?
>
> I've also posted this at forums.gentoo.org, I'll reply to this if I get
> a solution there.
>
>
> Thanks,
> Andrew
>
> --
> gentoo-amd64@gentoo.org mailing list
>
>
--
dott. ing. beso
[-- Attachment #2: Type: text/html, Size: 5372 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [gentoo-amd64] Wireless Network adapter
2007-10-02 9:17 ` Beso
@ 2007-10-02 19:02 ` Andrew Long
2007-10-02 20:12 ` Beso
0 siblings, 1 reply; 4+ messages in thread
From: Andrew Long @ 2007-10-02 19:02 UTC (permalink / raw
To: gentoo-amd64
I downloaded version 0.17 from the at76c503a.berlios.de site, and it
compiles and works properly. I was hoping to use the ebuild, so that
it would be easier to update and recompile whenever I update the
kernel, but it works, and that's the important part.
Thanks for your help,
Andrew Long
On 10/2/07, Beso <givemesugarr@gmail.com> wrote:
> i have managed to compile with no problems the at76c503-0.16 with
> linux-2.6.22-r8 on amd64 and managed to load the module without problems
> with modprobe. the problem as what i have seen may be due to the fact that
> you didn't compile your new kernel in /usr/src/linux. if the kernel is not
> compiled the module wouldn't compile fine.
> switch to the 0.16 version and try to build it and see if it builds.
> unfortunately i don't have a way to verify it cause i don't have any hw with
> wich to try.
>
> 2007/10/2, Andrew Long < jandrewlong@gmail.com>:
> > I'm trying to use a Linksys WUSB11 2.8 adapter to get wireless internet
> > on my computer. In the past, (I think it was when I was using x86, I
> > have since switched to amd64 on the same box) I was able to use the
> > at76c503 ebuild to get the drivers installed. When I try to build it I
> > get the following error:
> >
> >
> > make -C /usr/src/linux
> >
> M=/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1
> > KERNELRELEASE=2.6.22-gentoo-r8 modules
> > make[1]: Entering directory `/usr/src/linux- 2.6.22-gentoo-r8'
> > CC [M]
> >
> /var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.o
> > CC [M]
> >
> /var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76_usbdfu.o
> >
> /var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
> > In function 'ieee80211_to_eth':
> >
> /var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3599:
> > error: 'struct sk_buff' has no member named 'mac'
> >
> /var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
> > In function 'ieee80211_fixup':
> > /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3653:
> > error: 'struct sk_buff' has no member named 'mac'
> >
> /var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
> > In function 'check_for_rx_frags':
> >
> /var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3732:
> > warning: format '%p' expects type 'void *', but argument 5 has type
> > 'sk_buff_data_t'
> > /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3732:
> > warning: format '%p' expects type 'void *', but argument 6 has type
> > 'sk_buff_data_t'
> >
> /var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3769:
> > warning: format '%p' expects type 'void *', but argument 5 has type
> > 'sk_buff_data_t'
> >
> /var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3769:
> > warning: format '%p' expects type 'void *', but argument 6 has type
> > 'sk_buff_data_t'
> >
> /var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
> > In function 'rx_monitor_mode':
> >
> /var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:4133:
> > error: 'struct sk_buff' has no member named 'mac'
> > make[2]: ***
> >
> [/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1/at76c503.o]
> > Error 1
> > make[2]: *** Waiting for unfinished jobs....
> > make[1]: ***
> >
> [_module_/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/work/at76_usb-0.14beta1]
> > Error 2
> > make[1]: Leaving directory `/usr/src/linux-2.6.22-gentoo-r8'
> > make: *** [modules] Error 2
> > *
> > * ERROR: net-wireless/at76c503a-0.14_beta1 failed.
> > * Call stack:
> > * ebuild.sh, line 1654: Called dyn_compile
> > * ebuild.sh, line 990: Called qa_call 'src_compile'
> > * ebuild.sh, line 44: Called src_compile
> > * ebuild.sh, line 1334: Called linux-mod_src_compile
> > * linux-mod.eclass, line 516: Called die
> > *
> > * Unable to make KERNEL_PATH=/usr/src/linux all.
> > * If you need support, post the topmost build error, and the call stack
> > if relevant.
> > * A complete build log is located at
> >
> '/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/temp/build.log'.
> > *
> >
> >
> >
> > I've also tried using the atmel module in the kernel (2.6.22-gentoo-r8
> > ), but something is not working right. When I plug in the device, dmesg
> > shows this:
> >
> > usb 5-3.4: new full speed USB device using ehci_hcd and address 4
> > usb 5-3.4: configuration #1 chosen from 1 choice
> >
> >
> >
> > Are any of you using this adapter? If so, were you able to use the
> > ebuild to install the driver?
> >
> > Can you recommend another 802.11b adapter that works with amd64?
> >
> > I've also posted this at forums.gentoo.org, I'll reply to this if I get
> > a solution there.
> >
> >
> > Thanks,
> > Andrew
> >
> > --
> > gentoo-amd64@gentoo.org mailing list
> >
> >
>
>
>
> --
> dott. ing. beso
--
gentoo-amd64@gentoo.org mailing list
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [gentoo-amd64] Wireless Network adapter
2007-10-02 19:02 ` Andrew Long
@ 2007-10-02 20:12 ` Beso
0 siblings, 0 replies; 4+ messages in thread
From: Beso @ 2007-10-02 20:12 UTC (permalink / raw
To: gentoo-amd64
[-- Attachment #1: Type: text/plain, Size: 5972 bytes --]
there is the at76c503 ebuild for the 0.17. you just have to unmask it in
/etc/package.keywords and then it compiles fine.
if you're not convinced try doing a ls -l
/usr/portage/net-wireless/at76c503a/ and see that there is the 0.17. if it's
not there just emerge --sync and update portage tree and have it installed.
it may have been added today cause i have synced before trying to install
it.
2007/10/2, Andrew Long <jandrewlong@gmail.com>:
>
> I downloaded version 0.17 from the at76c503a.berlios.de site, and it
> compiles and works properly. I was hoping to use the ebuild, so that
> it would be easier to update and recompile whenever I update the
> kernel, but it works, and that's the important part.
>
> Thanks for your help,
> Andrew Long
>
> On 10/2/07, Beso <givemesugarr@gmail.com> wrote:
> > i have managed to compile with no problems the at76c503-0.16 with
> > linux-2.6.22-r8 on amd64 and managed to load the module without problems
> > with modprobe. the problem as what i have seen may be due to the fact
> that
> > you didn't compile your new kernel in /usr/src/linux. if the kernel is
> not
> > compiled the module wouldn't compile fine.
> > switch to the 0.16 version and try to build it and see if it builds.
> > unfortunately i don't have a way to verify it cause i don't have any hw
> with
> > wich to try.
> >
> > 2007/10/2, Andrew Long < jandrewlong@gmail.com>:
> > > I'm trying to use a Linksys WUSB11 2.8 adapter to get wireless
> internet
> > > on my computer. In the past, (I think it was when I was using x86, I
> > > have since switched to amd64 on the same box) I was able to use the
> > > at76c503 ebuild to get the drivers installed. When I try to build it I
> > > get the following error:
> > >
> > >
> > > make -C /usr/src/linux
> > >
> > M=/var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1
> > > KERNELRELEASE=2.6.22-gentoo-r8 modules
> > > make[1]: Entering directory `/usr/src/linux- 2.6.22-gentoo-r8'
> > > CC [M]
> > >
> > /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.o
> > > CC [M]
> > >
> > /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76_usbdfu.o
> > >
> > /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
> > > In function 'ieee80211_to_eth':
> > >
> > /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3599:
> > > error: 'struct sk_buff' has no member named 'mac'
> > >
> > /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
> > > In function 'ieee80211_fixup':
> > > /var/tmp/portage/net-wireless/at76c503a-
> > 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3653:
> > > error: 'struct sk_buff' has no member named 'mac'
> > >
> > /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
> > > In function 'check_for_rx_frags':
> > >
> > /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3732:
> > > warning: format '%p' expects type 'void *', but argument 5 has type
> > > 'sk_buff_data_t'
> > > /var/tmp/portage/net-wireless/at76c503a-
> > 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3732:
> > > warning: format '%p' expects type 'void *', but argument 6 has type
> > > 'sk_buff_data_t'
> > >
> > /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3769:
> > > warning: format '%p' expects type 'void *', but argument 5 has type
> > > 'sk_buff_data_t'
> > >
> > /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:3769:
> > > warning: format '%p' expects type 'void *', but argument 6 has type
> > > 'sk_buff_data_t'
> > >
> > /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:
> > > In function 'rx_monitor_mode':
> > >
> > /var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.c:4133:
> > > error: 'struct sk_buff' has no member named 'mac'
> > > make[2]: ***
> > >
> > [/var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1/at76c503.o]
> > > Error 1
> > > make[2]: *** Waiting for unfinished jobs....
> > > make[1]: ***
> > >
> > [_module_/var/tmp/portage/net-wireless/at76c503a-
> 0.14_beta1/work/at76_usb-0.14beta1]
> > > Error 2
> > > make[1]: Leaving directory `/usr/src/linux-2.6.22-gentoo-r8'
> > > make: *** [modules] Error 2
> > > *
> > > * ERROR: net-wireless/at76c503a-0.14_beta1 failed.
> > > * Call stack:
> > > * ebuild.sh, line 1654: Called dyn_compile
> > > * ebuild.sh, line 990: Called qa_call 'src_compile'
> > > * ebuild.sh, line 44: Called src_compile
> > > * ebuild.sh, line 1334: Called linux-mod_src_compile
> > > * linux-mod.eclass, line 516: Called die
> > > *
> > > * Unable to make KERNEL_PATH=/usr/src/linux all.
> > > * If you need support, post the topmost build error, and the call
> stack
> > > if relevant.
> > > * A complete build log is located at
> > >
> > '/var/tmp/portage/net-wireless/at76c503a-0.14_beta1/temp/build.log'.
> > > *
> > >
> > >
> > >
> > > I've also tried using the atmel module in the kernel (2.6.22-gentoo-r8
> > > ), but something is not working right. When I plug in the device,
> dmesg
> > > shows this:
> > >
> > > usb 5-3.4: new full speed USB device using ehci_hcd and address 4
> > > usb 5-3.4: configuration #1 chosen from 1 choice
> > >
> > >
> > >
> > > Are any of you using this adapter? If so, were you able to use the
> > > ebuild to install the driver?
> > >
> > > Can you recommend another 802.11b adapter that works with amd64?
> > >
> > > I've also posted this at forums.gentoo.org, I'll reply to this if I
> get
> > > a solution there.
> > >
> > >
> > > Thanks,
> > > Andrew
> > >
> > > --
> > > gentoo-amd64@gentoo.org mailing list
> > >
> > >
> >
> >
> >
> > --
> > dott. ing. beso
> --
> gentoo-amd64@gentoo.org mailing list
>
>
--
dott. ing. beso
[-- Attachment #2: Type: text/html, Size: 7650 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2007-10-02 20:23 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-10-02 7:24 [gentoo-amd64] Wireless Network adapter Andrew Long
2007-10-02 9:17 ` Beso
2007-10-02 19:02 ` Andrew Long
2007-10-02 20:12 ` Beso
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox