[gentoo-amd64] Error emerge-ing ffmpeg-0.4.9-_p20062006

[gentoo-amd64] Error emerge-ing ffmpeg-0.4.9-_p20062006

[Ronan Klyne]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello all,

I recieve the following output when emerging the aforementioned package...

/usr/lib/gcc/x86_64-pc-linux-gnu/4.1.1/../../../../x86_64-pc-linux-gnu/bin/ld:
dsputil.o: relocation R_X86_64_PC32 against `pix_abs16_c' can not be
used when making a shared object; recompile with -fPIC
/usr/lib/gcc/x86_64-pc-linux-gnu/4.1.1/../../../../x86_64-pc-linux-gnu/bin/ld:
final link failed: Bad value
collect2: ld returned 1 exit status
make[1]: *** [libavcodec.so.51] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory
`/var/tmp/portage/ffmpeg-0.4.9_p20061016/work/ffmpeg/libavcodec'
make: *** [lib] Error 2

!!! ERROR: media-video/ffmpeg-0.4.9_p20061016 failed.
Call stack:
  ebuild.sh, line 1546:   Called dyn_compile
  ebuild.sh, line 937:   Called src_compile
  ffmpeg-0.4.9_p20061016.ebuild, line 156:   Called die

!!! make failed

//////////////////////////////

I believe this to be a bug in the package, but unfortunately I don't
have the skills to diagnose it. Any help would be greatly appreciated...

	Thanks in advance,

		Ronan

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)

iD8DBQFFdcdyO7n2sgVOSqsRApmKAKCp8P2Jb/vjuR+u3Ek30HGD5j4Y9gCgrh8I
+XFONERXKZEFKrbwQzUVXJE=
=izfq
-----END PGP SIGNATURE-----
-- 
gentoo-amd64@gentoo.org mailing list

Re: [gentoo-amd64] Error emerge-ing ffmpeg-0.4.9-_p20062006

[Juergen Schinker]

Am Di, 5.12.2006, 19:24, schrieb Ronan Klyne:
> -----BEGIN PGP SIGNED MESSAGE-----

i confirm that error

Juergen

-- 
gentoo-amd64@gentoo.org mailing list

Re: [gentoo-amd64] Error emerge-ing ffmpeg-0.4.9-_p20062006

[Peter Volkov (pva)]

[-- Attachment #1: Type: text/plain, Size: 402 bytes --]

Hello.

On Втр, 2006-12-05 at 19:24 +0000, Ronan Klyne wrote:
> I recieve the following output when emerging the aforementioned package...

Please, do not use mailing list for bug reports. Use bugzilla! BTW. This
bug was already reported in there so if you have something to add or you
want to follow discussion just add your email address into CC field in
bug 156082. Thank you.

Peter.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [gentoo-amd64] Error emerge-ing ffmpeg-0.4.9-_p20062006

[Ronan Klyne]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Peter Volkov (pva) wrote:
> Hello.
> 
> On Втр, 2006-12-05 at 19:24 +0000, Ronan Klyne wrote:
>> I recieve the following output when emerging the aforementioned package...
> 
> Please, do not use mailing list for bug reports. Use bugzilla! BTW. This
> bug was already reported in there so if you have something to add or you
> want to follow discussion just add your email address into CC field in
> bug 156082. Thank you.
> 
> Peter.

I apologise - the purpose of my message was not to report a bug, but to
ask for assistance in determining if it is a bug.
Somehow my googling did not turn up that bug page, thanks for pointing
it out...

Ronan
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)

iD8DBQFFeJWMO7n2sgVOSqsRAqbHAJ9OM8IIFQT07LFnBdSgERwplBJEKwCggpAO
Hxiqt5FGwfecZX3LoB9uoYg=
=N6Ke
-----END PGP SIGNATURE-----
-- 
gentoo-amd64@gentoo.org mailing list

Re: [gentoo-amd64] Error emerge-ing ffmpeg-0.4.9-_p20062006

[Thomas Rösner]

Ronan Klyne wrote:
> Somehow my googling did not turn up that bug page, thanks for pointing
> it out...

Google doesn't like bugzilla (and, to a lesser degree, the forums). So 
if you try to find out if someone else is hit by a problem, try bugzilla 
search (with ALL as first word when using the quick search), google, 
forums (that's the order I search them).

Regards,
    T.
-- 
gentoo-amd64@gentoo.org mailing list

[gentoo-amd64] unsubscribe

[roberts]

unsubscribe

-- 
gentoo-amd64@gentoo.org mailing list

Re: [gentoo-amd64] How to unsubscribe from a list (WAS: unsubscribe)

[Mike Doty]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

roberts wrote:
> unsubscribe
>
http://www.gentoo.org/main/en/lists.xml


- --
=======================================================
Mike Doty                      kingtaco -at- gentoo.org
Gentoo/AMD64 Strategic Lead
Gentoo Council
Gentoo Developer Relations
Gentoo Recruitment Lead
Gentoo Infrastructure
GPG: E1A5 1C9C 93FE F430 C1D6  F2AF 806B A2E4 19F4 AE05
=======================================================

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)

iQCVAwUBRXmVxoBrouQZ9K4FAQLQdAP8DJi5mSVjlPHkT3m02aoAsWno5xSVPwNH
ymLqu5MeHNnJiBRBEqfvTMgcMiHteJWKebZzHync00mDVz8sAr4d42nis/bpCkr+
92El+DYwsSfdaT5fhYY1yxOGH4Tch2OBeDivnGJDnk+DvFJVqhzjyZccS/vySxpV
ZRPDF/c5py4=
=v1Yu
-----END PGP SIGNATURE-----
-- 
gentoo-amd64@gentoo.org mailing list

Re: [gentoo-amd64] unsubscribe

[Daniel Iliev]

roberts wrote:
> unsubscribe
>
>   

I will not!

;-)))

-- 
Best regards,
Daniel


-- 
gentoo-amd64@gentoo.org mailing list

Re: [gentoo-amd64] unsubscribe

[Joaquim Quinteiro Uchoa]

How To UnSubscribe

    First, send me $29.95 + 6.95 shipping for an Unsubscribing Kit.
When you receive it, follow these directions.

    The basic kit will be the standard no-fault type. Depending on
your specific requirements, System A and/or System B can be used. When
operating System A, depress yellow lever and a plastic dalkron
unsubscriber will be dispensed through the slot immediately
underneath. When you have fastened the adhesive lip, attach connection
marked by the large "X" on the outlet hose. Twist the silver-coloured
ring one inch below the connection point until you feel it lock into
position.

    The kit is now ready for use. The Cin-Eliminator is activated by
the small switch on the lip. When securing, twist the ring back to its
initial condition, so that the two orange lines meet. Disconnect.
Place the dalkron unsubscriber in the vacuum receptacle to the rear.
Activate by pressing the blue button.

    The controls for System B are located on the opposite side. The
red release switch swings the Cin-Eliminator into position; it can be
adjusted manually up or down by pressing the blue manual release
button. The opening is self-adjusting. To secure after use, press the
green button, which simultaneously activates the evaporator and
returns the Cin-Eliminator to its neutral position.

    You may log off if the green exit light is on over the evaporator.
If the red light is illuminated, one of the Cin-Eliminator
requirements has not been properly implemented. Press the "List Guy"
call button, located to the right of the evaporator. He will secure
all facilities from his control panel.

    To use the Auto-Unsub, first undress and place your clothes in the
clothes rack. Put on the Velcro slippers located in the cabinet
immediately below. Enter the shower, taking the entire kit with you.
On the control panel to your upper right upon entering you will see a
"Shower seal" button. Press to activate. A green light will then be
illuminated immediately beneath the button. On the intensity knob,
select the desired setting. Now depress the Auto-Unsub activation
lever and bathe normally.

    The Auto-Unsub will automatically turn off after three minutes
unless you activate the "Manual off" override switch by flipping it
up. When you are ready to leave, press the blue "Shower seal release"
button. The door will open and you may leave. Please remove the Velcro
slippers and place them in the receptacle provided.

    If you prefer the ultrasonic log-off mode, press the indicated
orange button. When the twin panels open, pull forward by rings A & B.
The knob to the left, just below the blue light, has three settings,
low, medium or high. For normal use, the medium setting is suggested.

    After these settings have been made, you can activate the device
by switching to the "ON" position the clearly marked red switch. If
during the unsubscribing operation, you wish to change the settings,
turn the "manual off" override switch to the "OFF" position. You may
now make the change and repeat the cycle. When the green exit light
goes on, you may log off and have lunch. Please close the door behind
you to avoid discharging the Cin-Eliminator during periods of nonuse.

2006/12/8, roberts <listes@ocean.lv>:
> unsubscribe
>
> --
> gentoo-amd64@gentoo.org mailing list
>
>


-- 
[]s
Joaquim
------------------------------------------
  (o_    Joaquim Quinteiro Uchoa
 //\        Consultor Linux e EaD
 U_/_    Linux User # 100534
------------------------------------------
-- 
gentoo-amd64@gentoo.org mailing list

Re: [gentoo-amd64] unsubscribe

[Marek Wróbel]

Joaquim Quinteiro Uchoa wrote:
> How To UnSubscribe
> 
>    First, send me $29.95 + 6.95 shipping for an Unsubscribing Kit.
> When you receive it, follow these directions.
>
> [SNIP]

I had been waiting for it :)

Regards,
Marek Wróbel
-- 
gentoo-amd64@gentoo.org mailing list

Re: [gentoo-amd64] unsubscribe

[Vladimir G. Ivanovic]

Marek Wróbel wrote:
> Joaquim Quinteiro Uchoa wrote:
>> How To UnSubscribe
>>
>>    First, send me $29.95 + 6.95 shipping for an Unsubscribing Kit.
>> When you receive it, follow these directions.
>>
>> [SNIP]
> 
> I had been waiting for it :)
> 
> Regards,
> Marek Wróbel

Me too. I lost the original instructions and so I've been compelled to 
read all those messages to gentoo-amd64. (When will those people get a 
life? ;-)

Thanks.

--- Vladimir

P.S. I heard there was a $10 mail-in rebate (one per household) , but 
I've spent hours looking for it on the Web, without ever finding it. 
Any leads would be appreciated.
-- 
gentoo-amd64@gentoo.org mailing list

Re: [gentoo-amd64] unsubscribe

[Peter Weller]

Time for me to unsubscribe ^_-
-- 
gentoo-amd64@gentoo.org mailing list