-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Ok, I am trying to get my raid working.  I have /dev/hda,b,c,d and
/dev/sda,b,c.  My boot partition is on /dev/sda1 and /dev/sdb1
(mirrored).  So, how do I set that up?

Grub gives me:

grub> find /boot/grub/stage1
 (hd0,0)
 (hd3,0)
 (hd4,0)

You can ignore hd0,0 - that is my old non-raid boot partition - it will
get blown away once I'm migrated to the raid.

I'm not sure if the drive numbers that grub sees will change when I boot
off of sda or sdb.  I did try to set things up following the various
howtos and it didn't work, but they all tend to assume your boot drive
is hd0.

Any pointers?  And don't ask why I have so many drives and am only now
starting to set up a RAID...  :)  Suffice it to say my current lvm
config makes me nervous...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFGPRXQG4/rWKZmVWkRAjWlAJ9gbbmYtAqscvWrMw66NyhaOFvdigCffzi0
DMvaWlUsHaJTIALMCLL1NGI=
=1p6M
-----END PGP SIGNATURE-----