* [gentoo-amd64] X crashing so oftenly
@ 2006-08-08 15:05 jai kumar
2006-08-08 16:15 ` jai kumar
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: jai kumar @ 2006-08-08 15:05 UTC (permalink / raw
To: gentoo-amd64
[-- Attachment #1: Type: text/plain, Size: 39947 bytes --]
Hi all,
Again i got strange kind of problem. Well i find out that there is no /etc/x11/xorg.conf in my gentoo and X server is running and making its own config at run time.
I have "virtual/x11-7.0-r2 +x11-base/xorg-x11-7.1+
x11-drivers/xf86-video-via-0.2.1-r1" installed on my amd64 machine with on board video chipset+512 mb ram. well sometimes while doing "ctrl+alt+f1(for teminal tty0)" my X server crash down and restart again. I did google for the same but didn't find any matching answer.
Is it something to do with xorg.conf ??
my on-board video adapter is ::
-------------------------------------------------------------------------------------------
01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01)
-------------------------------------------------------------------------------------------
I compiled my kernel with following video option.
--------------------------------------------------------------------------------------------
CONFIG_ACPI_VIDEO=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_VIVI=y
CONFIG_VIDEO_BUF=y
CONFIG_VIDEO_SELECT=y
# CONFIG_AGP_VIA is not set
CONFIG_DRM_VIA=m
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_FB_VIRTUAL=y
CONFIG_FB_SPLASH=y
CONFIG_FB_SAVAGE=y
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_FB_VESA_STD=y
CONFIG_FB_VGA16=y
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_DRM_VIA=m
CONFIG_DRM=m
---------------------------------------------------------------------------------------------
Here is my Xorg.0.log
---------------------------------------------------------------------------------------------
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.17-gentoo-r4 x86_64
Current Operating System: Linux flukebox 2.6.17-gentoo-r4 #2 Mon Aug 7 01:49:28 GMT 2006 x86_64
Build Date: 04 August 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 8 19:54:22 2006
(EE) Unable to locate/open config file
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib64/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib64/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0204 card 1106,0204 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1106,1204 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:2: chip 1106,2204 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:3: chip 1106,3204 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:4: chip 1106,4204 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:7: chip 1106,7204 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b188 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0f:0: chip 1106,3149 card 1106,3149 rev 80 class 01,04,00 hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1458,5002 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1458,5004 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1458,5004 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1458,5004 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1458,5004 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1458,5004 rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1458,5001 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1458,a002 rev 60 class 04,01,00 hdr 00
(II) PCI: 00:13:0: chip 10ec,8139 card 1458,e000 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 1106,3108 card 1106,3108 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) unknown vendor (0x1106) unknown chipset (0x3108) rev 1, Mem @ 0xe4000000/26, 0xe8000000/24
xf86AutoConfig: Primary PCI is 1:0:0
Running "getconfig -X 70101000 -I /etc/X11,/usr/etc/X11,/usr/lib64/xorg/modules,/usr/lib/X11/getconfig -v 0x1106 -d 0x3108 -r 0x01 -s 0x1106 -b 0x3108 -c 0x0300"
New driver is "via"
(==) Using default built-in configuration (53 lines)
(==) --- Start of built-in configuration ---
Section "Module"
Load "extmod"
Load "dbe"
Load "glx"
Load "freetype"
EndSection
Section "Monitor"
Identifier "Builtin Default Monitor"
Option "TargetRefresh" "75.0"
EndSection
Section "Device"
Identifier "Builtin Default via Device 0"
Driver "via"
EndSection
Section "Screen"
Identifier "Builtin Default via Screen 0"
Device "Builtin Default via Device 0"
Monitor "Builtin Default Monitor"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
Monitor "Builtin Default Monitor"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
Monitor "Builtin Default Monitor"
EndSection
Section "Device"
Identifier "Builtin Default vga Device 0"
Driver "vga"
EndSection
Section "Screen"
Identifier "Builtin Default vga Screen 0"
Device "Builtin Default vga Device 0"
Monitor "Builtin Default Monitor"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default via Screen 0"
Screen "Builtin Default fbdev Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default vga Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default via Screen 0" (0)
(**) | |-->Monitor "Builtin Default Monitor"
(**) | |-->Device "Builtin Default via Device 0"
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) | |-->Monitor "Builtin Default Monitor"
(**) | |-->Device "Builtin Default fbdev Device 0"
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) | |-->Monitor "Builtin Default Monitor"
(**) | |-->Device "Builtin Default vesa Device 0"
(**) |-->Screen "Builtin Default vga Screen 0" (3)
(**) | |-->Monitor "Builtin Default Monitor"
(**) | |-->Device "Builtin Default vga Device 0"
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(WW) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
(WW) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
(WW) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib64/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xea001000 - 0xea0010ff (0x100) MX[B]
[1] -1 0 0xea000000 - 0xea0000ff (0x100) MX[B]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[3] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
[4] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[5] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[6] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
[7] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[8] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[9] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[10] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[B]
[11] -1 0 0x0000a800 - 0x0000a80f (0x10) IX[B]
[12] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[13] -1 0 0x0000a000 - 0x0000a00f (0x10) IX[B]
[14] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B]
[15] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[16] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[17] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xea001000 - 0xea0010ff (0x100) MX[B]
[1] -1 0 0xea000000 - 0xea0000ff (0x100) MX[B]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[3] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
[4] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[5] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[6] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
[7] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[8] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[9] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[10] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[B]
[11] -1 0 0x0000a800 - 0x0000a80f (0x10) IX[B]
[12] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[13] -1 0 0x0000a000 - 0x0000a00f (0x10) IX[B]
[14] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B]
[15] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[16] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[17] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xea001000 - 0xea0010ff (0x100) MX[B]
[5] -1 0 0xea000000 - 0xea0000ff (0x100) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
[8] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[12] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
[13] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[14] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[15] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[16] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[B]
[17] -1 0 0x0000a800 - 0x0000a80f (0x10) IX[B]
[18] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[19] -1 0 0x0000a000 - 0x0000a00f (0x10) IX[B]
[20] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B]
[21] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[22] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[23] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib64/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.1.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "via"
(II) Loading /usr/lib64/xorg/modules/drivers/via_drv.so
(II) Module via: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "vga"
(WW) Warning, couldn't open module vga
(II) UnloadModule: "vga"
(EE) Failed to load module "vga" (module does not exist, 0)
(II) LoadModule: "mouse"
(II) Loading /usr/lib64/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "kbd"
(II) Loading /usr/lib64/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) VIA: driver for VIA chipsets: CLE266, KM400/KN400, K8M800,
PM800/PM880/CN400
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset K8M800 found
(!!) VIA Technologies does not support or endorse this driver in any way.
(!!) For support please contact the driver maintainer or your X vendor.
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xea001000 - 0xea0010ff (0x100) MX[B]
[5] -1 0 0xea000000 - 0xea0000ff (0x100) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
[8] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[12] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
[13] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[14] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[15] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[16] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[B]
[17] -1 0 0x0000a800 - 0x0000a80f (0x10) IX[B]
[18] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[19] -1 0 0x0000a000 - 0x0000a00f (0x10) IX[B]
[20] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B]
[21] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[22] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[23] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xea001000 - 0xea0010ff (0x100) MX[B]
[5] -1 0 0xea000000 - 0xea0000ff (0x100) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
[8] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[15] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
[16] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[17] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[18] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[19] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[B]
[20] -1 0 0x0000a800 - 0x0000a80f (0x10) IX[B]
[21] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[22] -1 0 0x0000a000 - 0x0000a00f (0x10) IX[B]
[23] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B]
[24] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[25] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[26] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(II) VIA(0): Creating default Display subsection in Screen section
"Builtin Default via Screen 0" for depth/fbbpp 16/16
(==) VIA(0): Depth 16, (==) framebuffer bpp 16
(==) VIA(0): RGB weight 565
(==) VIA(0): Default visual is TrueColor
(==) VIA(0): Using XAA acceleration architecture
(==) VIA(0): Using HW cursor
(--) VIA(0): Chipset: "K8M800"
(--) VIA(0): mapping MMIO @ 0xe8000000 with size 0x9000
(--) VIA(0): mapping BitBlt MMIO @ 0xe8200000 with size 0x10000
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) VIA(0): Chipset Rev.: 0
(WW) VIA(0): Manufacturer plainly copied main PCI ids to Subsystem/Card ids.
(--) VIA(0): Detected VIA VT3108 (K8M800).
(==) VIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) VIA(0): videoram = 65536k
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib64/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) VIA(0): I2C bus "I2C bus 1" initialized.
(II) VIA(0): I2C bus "I2C bus 2" initialized.
(II) VIA(0): I2C bus "I2C bus 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib64/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) VIA(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) VIA(0): I2C device "I2C bus 1:ddc2" removed.
(II) VIA(0): Manufacturer: PHL Model: 820 Serial#: 188250
(II) VIA(0): Year: 2004 Week: 30
(II) VIA(0): EDID Version: 1.3
(II) VIA(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) VIA(0): Sync: Separate Composite SyncOnGreen
(II) VIA(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23
(II) VIA(0): Gamma: 2.20
(II) VIA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) VIA(0): First detailed timing is preferred mode
(II) VIA(0): redX: 0.631 redY: 0.347 greenX: 0.309 greenY: 0.583
(II) VIA(0): blueX: 0.150 blueY: 0.088 whiteX: 0.313 whiteY: 0.329
(II) VIA(0): Supported VESA Video Modes:
(II) VIA(0): 720x400@70Hz
(II) VIA(0): 640x480@60Hz
(II) VIA(0): 640x480@67Hz
(II) VIA(0): 640x480@72Hz
(II) VIA(0): 640x480@75Hz
(II) VIA(0): 800x600@56Hz
(II) VIA(0): 800x600@60Hz
(II) VIA(0): 800x600@72Hz
(II) VIA(0): 800x600@75Hz
(II) VIA(0): 832x624@75Hz
(II) VIA(0): 1024x768@60Hz
(II) VIA(0): 1024x768@70Hz
(II) VIA(0): 1024x768@75Hz
(II) VIA(0): Manufacturer's mask: 0
(II) VIA(0): Supported additional Video Mode:
(II) VIA(0): clock: 65.0 MHz Image Size: 307 x 230 mm
(II) VIA(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) VIA(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) VIA(0): Serial No: CX 188250
(II) VIA(0): Monitor name: Philips 150S
(II) VIA(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 63 kHz, PixClock max 80 MHz
(II) VIA(0): Builtin Default Monitor: Using default hsync range of 30.00-63.00 kHz
(II) VIA(0): Builtin Default Monitor: Using default vrefresh range of 56.00-76.00 Hz
(II) VIA(0): Clock range: 20.00 to 230.00 MHz
(II) VIA(0): Not using default mode "640x350" (vrefresh out of range)
(II) VIA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x400" (vrefresh out of range)
(II) VIA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "720x400" (vrefresh out of range)
(II) VIA(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x480" (vrefresh out of range)
(II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1024x768" (interlace mode not supported)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(WW) (1024x768,Builtin Default Monitor) mode clock 94.5MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1024x768" (hsync out of range)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(WW) (1152x864,Builtin Default Monitor) mode clock 108MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1152x864" (hsync out of range)
(II) VIA(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(WW) (1280x960,Builtin Default Monitor) mode clock 108MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(WW) (1280x960,Builtin Default Monitor) mode clock 148.5MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1280x960" (hsync out of range)
(II) VIA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(WW) (1280x1024,Builtin Default Monitor) mode clock 108MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) VIA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(WW) (1280x1024,Builtin Default Monitor) mode clock 135MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) VIA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(WW) (1280x1024,Builtin Default Monitor) mode clock 157.5MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) VIA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Builtin Default Monitor) mode clock 162MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Builtin Default Monitor) mode clock 175.5MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Builtin Default Monitor) mode clock 189MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Builtin Default Monitor) mode clock 202.5MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Builtin Default Monitor) mode clock 229.5MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1792x1344,Builtin Default Monitor) mode clock 204.8MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) VIA(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(WW) (1856x1392,Builtin Default Monitor) mode clock 218.3MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) VIA(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1152x768" (vrefresh out of range)
(II) VIA(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(WW) (1400x1050,Builtin Default Monitor) mode clock 122MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) VIA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) VIA(0): CrtcHSyncEnd out of range.
(II) VIA(0): Not using default mode "1400x1050" (horizontal sync too wide)
(II) VIA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(WW) (1600x1024,Builtin Default Monitor) mode clock 106.91MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1600x1024" (hsync out of range)
(II) VIA(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(**) Option "TargetRefresh" "75.0"
(**) VIA(0): Target refresh rate is 75.0 Hz
(--) VIA(0): Virtual size is 1024x768 (pitch 1024)
(**) VIA(0): *Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
(II) VIA(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) VIA(0): *Default mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
(II) VIA(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) VIA(0): *Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) VIA(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) VIA(0): *Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) VIA(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(--) VIA(0): Display dimensions: (300, 230) mm
(--) VIA(0): DPI set to (86, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib64/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib64/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe8000000 - 0xe8ffffff (0x1000000) MS[B]
[1] 0 0 0xe4000000 - 0xe7ffffff (0x4000000) MS[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xea001000 - 0xea0010ff (0x100) MX[B]
[7] -1 0 0xea000000 - 0xea0000ff (0x100) MX[B]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
[10] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[17] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
[18] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[19] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[20] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[21] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[B]
[22] -1 0 0x0000a800 - 0x0000a80f (0x10) IX[B]
[23] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[24] -1 0 0x0000a000 - 0x0000a00f (0x10) IX[B]
[25] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B]
[26] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[27] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[28] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(--) VIA(0): mapping framebuffer @ 0xe4000000 with size 0x4000000
(==) VIA(0): Write-combining range (0xe4000000,0x4000000)
(--) VIA(0): Frame buffer start: 0x2ade19d0c000, free start: 0x180000 end: 0x4000000
(--) VIA(0): mapping MMIO @ 0xe8000000 with size 0x9000
(--) VIA(0): mapping BitBlt MMIO @ 0xe8200000 with size 0x10000
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) VIA(0): 3D Engine has been initialized.
(II) VIA(0): VIAInternalScreenInit
(II) VIA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
31 128x128 slots
12 256x256 slots
4 512x512 slots
32 8x8 color pattern slots
(==) VIA(0): Backing store disabled
(II) VIA(0): direct rendering disabled
(II) VIA(0): Using default xfree86 memcpy for video.
(WW) VIA(0): [XvMC] Cannot use XvMC without DRI!
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: DRI module not loaded
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib64/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: Core Pointer
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) Option "CoreKeyboard"
(**) <default keyboard>: Core Keyboard
(**) Option "Protocol" "standard"
(**) <default keyboard>: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) <default keyboard>: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) <default keyboard>: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) <default keyboard>: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) <default keyboard>: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
xkb_keycodes { include "xfree86+aliases(qwerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+us" };
xkb_geometry { include "pc(pc105)" };
(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
AUDIT: Tue Aug 8 19:54:25 2006: 1688 X: client 2 rejected from local host
AUDIT: Tue Aug 8 19:54:25 2006: 1688 X: client 3 rejected from local host
AUDIT: Tue Aug 8 19:54:25 2006: 1688 X: client 2 rejected from local host
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) <default pointer>: ps2EnableDataReporting: succeeded
-------------------------------------------------------------------------------------------
Waiting for your help.
Sorry fot the hotch-potch.
Thank you.
~jaiks
---------------------------------
Here’s a new way to find what you're looking for - Yahoo! Answers
[-- Attachment #2: Type: text/html, Size: 52725 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [gentoo-amd64] X crashing so oftenly
2006-08-08 15:05 [gentoo-amd64] X crashing so oftenly jai kumar
@ 2006-08-08 16:15 ` jai kumar
2006-08-08 19:17 ` Bob Slawson
2006-08-09 14:13 ` [gentoo-amd64] " Duncan
2 siblings, 0 replies; 4+ messages in thread
From: jai kumar @ 2006-08-08 16:15 UTC (permalink / raw
To: gentoo-amd64
[-- Attachment #1.1: Type: text/plain, Size: 40211 bytes --]
here is the screenshot.
thanks.
~jaiks
jai kumar <jaikumar1004_in@yahoo.co.in> wrote: Hi all,
Again i got strange kind of problem. Well i find out that there is no /etc/x11/xorg.conf in my gentoo and X server is running and making its own config at run time.
I have "virtual/x11-7.0-r2 +x11-base/xorg-x11-7.1+
x11-drivers/xf86-video-via-0.2.1-r1" installed on my amd64 machine with on board video chipset+512 mb ram. well sometimes while doing "ctrl+alt+f1(for teminal tty0)" my X server crash down and restart again. I did google for the same but didn't find any matching answer.
Is it something to do with xorg.conf ??
my on-board video adapter is ::
-------------------------------------------------------------------------------------------
01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01)
-------------------------------------------------------------------------------------------
I compiled my kernel with following video option.
--------------------------------------------------------------------------------------------
CONFIG_ACPI_VIDEO=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_VIVI=y
CONFIG_VIDEO_BUF=y
CONFIG_VIDEO_SELECT=y
# CONFIG_AGP_VIA is not set
CONFIG_DRM_VIA=m
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_FB_VIRTUAL=y
CONFIG_FB_SPLASH=y
CONFIG_FB_SAVAGE=y
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_FB_VESA_STD=y
CONFIG_FB_VGA16=y
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_DRM_VIA=m
CONFIG_DRM=m
---------------------------------------------------------------------------------------------
Here is my Xorg.0.log
---------------------------------------------------------------------------------------------
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.17-gentoo-r4 x86_64
Current Operating System: Linux flukebox 2.6.17-gentoo-r4 #2 Mon Aug 7 01:49:28 GMT 2006 x86_64
Build Date: 04 August 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 8 19:54:22 2006
(EE) Unable to locate/open config file
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.0
X.Org XInput driver : 0.6
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib64/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib64/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0204 card 1106,0204 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1106,1204 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:2: chip 1106,2204 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:3: chip 1106,3204 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:4: chip 1106,4204 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:7: chip 1106,7204 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b188 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0f:0: chip 1106,3149 card 1106,3149 rev 80 class 01,04,00 hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1458,5002 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1458,5004 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1458,5004 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1458,5004 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1458,5004 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1458,5004 rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1458,5001 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1458,a002 rev 60 class 04,01,00 hdr 00
(II) PCI: 00:13:0: chip 10ec,8139 card 1458,e000 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 1106,3108 card 1106,3108 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) unknown vendor (0x1106) unknown chipset (0x3108) rev 1, Mem @ 0xe4000000/26, 0xe8000000/24
xf86AutoConfig: Primary PCI is 1:0:0
Running "getconfig -X 70101000 -I /etc/X11,/usr/etc/X11,/usr/lib64/xorg/modules,/usr/lib/X11/getconfig -v 0x1106 -d 0x3108 -r 0x01 -s 0x1106 -b 0x3108 -c 0x0300"
New driver is "via"
(==) Using default built-in configuration (53 lines)
(==) --- Start of built-in configuration ---
Section "Module"
Load "extmod"
Load "dbe"
Load "glx"
Load "freetype"
EndSection
Section "Monitor"
Identifier "Builtin Default Monitor"
Option "TargetRefresh" "75.0"
EndSection
Section "Device"
Identifier "Builtin Default via Device 0"
Driver "via"
EndSection
Section "Screen"
Identifier "Builtin Default via Screen 0"
Device "Builtin Default via Device 0"
Monitor "Builtin Default Monitor"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
Monitor "Builtin Default Monitor"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
Monitor "Builtin Default Monitor"
EndSection
Section "Device"
Identifier "Builtin Default vga Device 0"
Driver "vga"
EndSection
Section "Screen"
Identifier "Builtin Default vga Screen 0"
Device "Builtin Default vga Device 0"
Monitor "Builtin Default Monitor"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default via Screen 0"
Screen "Builtin Default fbdev Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default vga Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default via Screen 0" (0)
(**) | |-->Monitor "Builtin Default Monitor"
(**) | |-->Device "Builtin Default via Device 0"
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) | |-->Monitor "Builtin Default Monitor"
(**) | |-->Device "Builtin Default fbdev Device 0"
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) | |-->Monitor "Builtin Default Monitor"
(**) | |-->Device "Builtin Default vesa Device 0"
(**) |-->Screen "Builtin Default vga Screen 0" (3)
(**) | |-->Monitor "Builtin Default Monitor"
(**) | |-->Device "Builtin Default vga Device 0"
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(WW) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
(WW) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
(WW) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib64/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xea001000 - 0xea0010ff (0x100) MX[B]
[1] -1 0 0xea000000 - 0xea0000ff (0x100) MX[B]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[3] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
[4] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[5] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[6] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
[7] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[8] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[9] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[10] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[B]
[11] -1 0 0x0000a800 - 0x0000a80f (0x10) IX[B]
[12] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[13] -1 0 0x0000a000 - 0x0000a00f (0x10) IX[B]
[14] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B]
[15] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[16] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[17] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xea001000 - 0xea0010ff (0x100) MX[B]
[1] -1 0 0xea000000 - 0xea0000ff (0x100) MX[B]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[3] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
[4] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[5] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[6] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
[7] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[8] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[9] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[10] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[B]
[11] -1 0 0x0000a800 - 0x0000a80f (0x10) IX[B]
[12] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[13] -1 0 0x0000a000 - 0x0000a00f (0x10) IX[B]
[14] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B]
[15] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[16] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[17] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xea001000 - 0xea0010ff (0x100) MX[B]
[5] -1 0 0xea000000 - 0xea0000ff (0x100) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
[8] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[12] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
[13] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[14] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[15] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[16] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[B]
[17] -1 0 0x0000a800 - 0x0000a80f (0x10) IX[B]
[18] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[19] -1 0 0x0000a000 - 0x0000a00f (0x10) IX[B]
[20] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B]
[21] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[22] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[23] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib64/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.1.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "via"
(II) Loading /usr/lib64/xorg/modules/drivers/via_drv.so
(II) Module via: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "vga"
(WW) Warning, couldn't open module vga
(II) UnloadModule: "vga"
(EE) Failed to load module "vga" (module does not exist, 0)
(II) LoadModule: "mouse"
(II) Loading /usr/lib64/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "kbd"
(II) Loading /usr/lib64/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) VIA: driver for VIA chipsets: CLE266, KM400/KN400, K8M800,
PM800/PM880/CN400
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset K8M800 found
(!!) VIA Technologies does not support or endorse this driver in any way.
(!!) For support please contact the driver maintainer or your X vendor.
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xea001000 - 0xea0010ff (0x100) MX[B]
[5] -1 0 0xea000000 - 0xea0000ff (0x100) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
[8] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[12] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
[13] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[14] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[15] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[16] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[B]
[17] -1 0 0x0000a800 - 0x0000a80f (0x10) IX[B]
[18] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[19] -1 0 0x0000a000 - 0x0000a00f (0x10) IX[B]
[20] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B]
[21] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[22] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[23] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xea001000 - 0xea0010ff (0x100) MX[B]
[5] -1 0 0xea000000 - 0xea0000ff (0x100) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
[8] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[15] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
[16] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[17] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[18] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[19] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[B]
[20] -1 0 0x0000a800 - 0x0000a80f (0x10) IX[B]
[21] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[22] -1 0 0x0000a000 - 0x0000a00f (0x10) IX[B]
[23] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B]
[24] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[25] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[26] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(II) VIA(0): Creating default Display subsection in Screen section
"Builtin Default via Screen 0" for depth/fbbpp 16/16
(==) VIA(0): Depth 16, (==) framebuffer bpp 16
(==) VIA(0): RGB weight 565
(==) VIA(0): Default visual is TrueColor
(==) VIA(0): Using XAA acceleration architecture
(==) VIA(0): Using HW cursor
(--) VIA(0): Chipset: "K8M800"
(--) VIA(0): mapping MMIO @ 0xe8000000 with size 0x9000
(--) VIA(0): mapping BitBlt MMIO @ 0xe8200000 with size 0x10000
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) VIA(0): Chipset Rev.: 0
(WW) VIA(0): Manufacturer plainly copied main PCI ids to Subsystem/Card ids.
(--) VIA(0): Detected VIA VT3108 (K8M800).
(==) VIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) VIA(0): videoram = 65536k
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib64/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) VIA(0): I2C bus "I2C bus 1" initialized.
(II) VIA(0): I2C bus "I2C bus 2" initialized.
(II) VIA(0): I2C bus "I2C bus 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib64/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) VIA(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) VIA(0): I2C device "I2C bus 1:ddc2" removed.
(II) VIA(0): Manufacturer: PHL Model: 820 Serial#: 188250
(II) VIA(0): Year: 2004 Week: 30
(II) VIA(0): EDID Version: 1.3
(II) VIA(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) VIA(0): Sync: Separate Composite SyncOnGreen
(II) VIA(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23
(II) VIA(0): Gamma: 2.20
(II) VIA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) VIA(0): First detailed timing is preferred mode
(II) VIA(0): redX: 0.631 redY: 0.347 greenX: 0.309 greenY: 0.583
(II) VIA(0): blueX: 0.150 blueY: 0.088 whiteX: 0.313 whiteY: 0.329
(II) VIA(0): Supported VESA Video Modes:
(II) VIA(0): 720x400@70Hz
(II) VIA(0): 640x480@60Hz
(II) VIA(0): 640x480@67Hz
(II) VIA(0): 640x480@72Hz
(II) VIA(0): 640x480@75Hz
(II) VIA(0): 800x600@56Hz
(II) VIA(0): 800x600@60Hz
(II) VIA(0): 800x600@72Hz
(II) VIA(0): 800x600@75Hz
(II) VIA(0): 832x624@75Hz
(II) VIA(0): 1024x768@60Hz
(II) VIA(0): 1024x768@70Hz
(II) VIA(0): 1024x768@75Hz
(II) VIA(0): Manufacturer's mask: 0
(II) VIA(0): Supported additional Video Mode:
(II) VIA(0): clock: 65.0 MHz Image Size: 307 x 230 mm
(II) VIA(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) VIA(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) VIA(0): Serial No: CX 188250
(II) VIA(0): Monitor name: Philips 150S
(II) VIA(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 63 kHz, PixClock max 80 MHz
(II) VIA(0): Builtin Default Monitor: Using default hsync range of 30.00-63.00 kHz
(II) VIA(0): Builtin Default Monitor: Using default vrefresh range of 56.00-76.00 Hz
(II) VIA(0): Clock range: 20.00 to 230.00 MHz
(II) VIA(0): Not using default mode "640x350" (vrefresh out of range)
(II) VIA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x400" (vrefresh out of range)
(II) VIA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "720x400" (vrefresh out of range)
(II) VIA(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x480" (vrefresh out of range)
(II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1024x768" (interlace mode not supported)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(WW) (1024x768,Builtin Default Monitor) mode clock 94.5MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1024x768" (hsync out of range)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(WW) (1152x864,Builtin Default Monitor) mode clock 108MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1152x864" (hsync out of range)
(II) VIA(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(WW) (1280x960,Builtin Default Monitor) mode clock 108MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(WW) (1280x960,Builtin Default Monitor) mode clock 148.5MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1280x960" (hsync out of range)
(II) VIA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(WW) (1280x1024,Builtin Default Monitor) mode clock 108MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) VIA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(WW) (1280x1024,Builtin Default Monitor) mode clock 135MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) VIA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(WW) (1280x1024,Builtin Default Monitor) mode clock 157.5MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) VIA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Builtin Default Monitor) mode clock 162MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Builtin Default Monitor) mode clock 175.5MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Builtin Default Monitor) mode clock 189MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Builtin Default Monitor) mode clock 202.5MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1600x1200,Builtin Default Monitor) mode clock 229.5MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(WW) (1792x1344,Builtin Default Monitor) mode clock 204.8MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) VIA(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(WW) (1856x1392,Builtin Default Monitor) mode clock 218.3MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) VIA(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1152x768" (vrefresh out of range)
(II) VIA(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(WW) (1400x1050,Builtin Default Monitor) mode clock 122MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) VIA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) VIA(0): CrtcHSyncEnd out of range.
(II) VIA(0): Not using default mode "1400x1050" (horizontal sync too wide)
(II) VIA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(WW) (1600x1024,Builtin Default Monitor) mode clock 106.91MHz exceeds DDC maximum 80MHz
(II) VIA(0): Not using default mode "1600x1024" (hsync out of range)
(II) VIA(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(**) Option "TargetRefresh" "75.0"
(**) VIA(0): Target refresh rate is 75.0 Hz
(--) VIA(0): Virtual size is 1024x768 (pitch 1024)
(**) VIA(0): *Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
(II) VIA(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) VIA(0): *Default mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
(II) VIA(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) VIA(0): *Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) VIA(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) VIA(0): *Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) VIA(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(--) VIA(0): Display dimensions: (300, 230) mm
(--) VIA(0): DPI set to (86, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib64/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib64/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe8000000 - 0xe8ffffff (0x1000000) MS[B]
[1] 0 0 0xe4000000 - 0xe7ffffff (0x4000000) MS[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xea001000 - 0xea0010ff (0x100) MX[B]
[7] -1 0 0xea000000 - 0xea0000ff (0x100) MX[B]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[B](B)
[10] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[17] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
[18] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[19] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[20] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[21] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[B]
[22] -1 0 0x0000a800 - 0x0000a80f (0x10) IX[B]
[23] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[24] -1 0 0x0000a000 - 0x0000a00f (0x10) IX[B]
[25] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B]
[26] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[27] -1 0 0x00009400 - 0x00009403 (0x4) IX[B]
[28] -1 0 0x00009000 - 0x00009007 (0x8) IX[B]
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(--) VIA(0): mapping framebuffer @ 0xe4000000 with size 0x4000000
(==) VIA(0): Write-combining range (0xe4000000,0x4000000)
(--) VIA(0): Frame buffer start: 0x2ade19d0c000, free start: 0x180000 end: 0x4000000
(--) VIA(0): mapping MMIO @ 0xe8000000 with size 0x9000
(--) VIA(0): mapping BitBlt MMIO @ 0xe8200000 with size 0x10000
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) VIA(0): 3D Engine has been initialized.
(II) VIA(0): VIAInternalScreenInit
(II) VIA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
31 128x128 slots
12 256x256 slots
4 512x512 slots
32 8x8 color pattern slots
(==) VIA(0): Backing store disabled
(II) VIA(0): direct rendering disabled
(II) VIA(0): Using default xfree86 memcpy for video.
(WW) VIA(0): [XvMC] Cannot use XvMC without DRI!
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: DRI module not loaded
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib64/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: Core Pointer
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) Option "CoreKeyboard"
(**) <default keyboard>: Core Keyboard
(**) Option "Protocol" "standard"
(**) <default keyboard>: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) <default keyboard>: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) <default keyboard>: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) <default keyboard>: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) <default keyboard>: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
xkb_keycodes { include "xfree86+aliases(qwerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+us" };
xkb_geometry { include "pc(pc105)" };
(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
AUDIT: Tue Aug 8 19:54:25 2006: 1688 X: client 2 rejected from local host
AUDIT: Tue Aug 8 19:54:25 2006: 1688 X: client 3 rejected from local host
AUDIT: Tue Aug 8 19:54:25 2006: 1688 X: client 2 rejected from local host
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) <default pointer>: ps2EnableDataReporting: succeeded
-------------------------------------------------------------------------------------------
Waiting for your help.
Sorry fot the hotch-potch.
Thank you.
~jaiks
---------------------------------
Here’s a new way to find what you're looking for - Yahoo! Answers
---------------------------------
Here’s a new way to find what you're looking for - Yahoo! Answers
[-- Attachment #1.2: Type: text/html, Size: 53218 bytes --]
[-- Attachment #2: 2581612141-Screenshot2.png --]
[-- Type: image/png, Size: 620714 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [gentoo-amd64] X crashing so oftenly
2006-08-08 15:05 [gentoo-amd64] X crashing so oftenly jai kumar
2006-08-08 16:15 ` jai kumar
@ 2006-08-08 19:17 ` Bob Slawson
2006-08-09 14:13 ` [gentoo-amd64] " Duncan
2 siblings, 0 replies; 4+ messages in thread
From: Bob Slawson @ 2006-08-08 19:17 UTC (permalink / raw
To: gentoo-amd64
jai kumar wrote:
> Hi all,
> Again i got strange kind of problem. Well i find out that there is
> no /etc/x11/xorg.conf in my gentoo and X server is running and making
> its own config at run time.
(on my machine I can find...)
$ apropos config | grep xorg
xorg.conf [xorg] (5x) - Configuration File for Xorg
xorgcfg (1x) - Graphical configuration tool for Xorg
xorgconfig (1x) - generate an xorg.conf file
xorg.conf [xorg] (5x) - Configuration File for Xorg
xorgcfg (1x) - Graphical configuration tool for Xorg
xorgconfig (1x) - generate an xorg.conf file
(so...)
$ man xorgconfig
(and when you're finished reading...run, as root...)
# xorgconfig
(that should leave you with /etc/X11/xorg.conf which you might want to
look at)
> I have "virtual/x11-7.0-r2 +x11-base/xorg-x11-7.1+
> x11-drivers/xf86-video-via-0.2.1-r1" installed on my amd64 machine
> with on board video chipset+512 mb ram. well sometimes while doing
> "ctrl+alt+f1(for teminal tty0)" my X server crash down and restart
> again. I did google for the same but didn't find any matching answer.
>
> Is it something to do with xorg.conf ??
Perhaps. But are you running X as user "root"? If so, don't; login as
an ordinary user, see
<http://www.gentoo.org/doc/en/handbook/handbook-amd64.xml?part=1&chap=11>
if you need help setting up account(s).
BobS
--
gentoo-amd64@gentoo.org mailing list
^ permalink raw reply [flat|nested] 4+ messages in thread
* [gentoo-amd64] Re: X crashing so oftenly
2006-08-08 15:05 [gentoo-amd64] X crashing so oftenly jai kumar
2006-08-08 16:15 ` jai kumar
2006-08-08 19:17 ` Bob Slawson
@ 2006-08-09 14:13 ` Duncan
2 siblings, 0 replies; 4+ messages in thread
From: Duncan @ 2006-08-09 14:13 UTC (permalink / raw
To: gentoo-amd64
jai kumar <jaikumar1004_in@yahoo.co.in> posted
20060808150529.47884.qmail@web8603.mail.in.yahoo.com, excerpted below, on
Tue, 08 Aug 2006 16:05:28 +0100:
> sometimes while doing
> "ctrl+alt+f1(for teminal tty0)" my X server crash down and restart
> again. I did google for the same but didn't find any matching answer.
I won't attempt a direct troubleshoot as my hardware is rather different,
but FWIW here's some generally related info.
Due to the nature of video hardware and how it interacts with the kernel
and X, it's really a wonder that VT-switching works at all, in most cases,
so it's not a wonder that it would be unstable at times.
The kernel has one set of video drivers, normally tho not always simply
text-mode console drivers, with DRM/DRI drivers to facilitate video memory
access for some video chips (and used in X mode, not the CLI), while X has
another set. Because xorg is designed not just for Linux, but to be run on
other *ix as well, it must maintain a measure of separation from the Linux
kernel, all the while trying to drive video as efficiently as possible.
In effect, while in X, X controls the video with its own video drivers and
with help from the kernel's DRI/DRM, but with the kernel's console mode
video drivers essentially disabled. Switching between X and a text mode
VT then becomes an /incredibly/ complex job whereby the X drivers must
suspend all their super-efficient direct video memory access and other
fancy stuff, and the kernel must reactivate its text mode drivers. It's
technically one of the most complex operations the computer is called upon
to do, involving extremely delicate timing issues subject to all sorts of
race conditions and two different software packages, xorg and the kernel,
both extremely complex on their own and evolving independently of each
other, plus various combinations of hardware, various pieces of which have
their own bugs and idiosyncrasies which must be worked around or risk
triggering a crash. Even worse, because of the nature of the hardware
involved, unlike the situation with most user space applications, when X
crashes, there's a real chance of taking down the kernel with it, or at
least corrupting the video subsystem such that the only way to work with
the system is entirely blind, or remotely, even when the kernel does
remain responsive.
As I said, it's /really/ a wonder that it works at all, even more so that
it can be made trouble-free enough in most instances to actually be
usable, and to cause complaints when it does /not/ work reliably.
This doesn't pertain directly to your issue, but the solution should.
Sometime in the early xorg series, I believe about xorg 6.8, the first
release with new code after the transfer from xfree, it became impossible
with my Radeon to switch to VT at all -- it would /always/ hang,
corrupting video to the point where the system was unusable (I have only
one system, so remote access is out of the question). I could shut down X
safely, work in the VTs as desired, and restart X, but I couldn't switch
to other VTs while X remained running, without a crash. I had to get used
to either shutting down X, or working from a terminal window (konsole, in
my case), avoiding the VT switch from X. The next release fixed the
problem, and I was again able to use VTs at will, but it was during that
episode that I read up on things enough to understand the issues, as laid
out above.
In the immediate term, it's possible/likely you'll have to work with a
similar workaround, using terminal windows or shutting down X, not trying
the VTs with X running. It's inconvenient, but once you retrain yourself
not to hit the VT-switch keys, workable.
Meanwhile, another solution that may or may not work for you, and if it
works, may or may not be something you can live with. The kernel also has
graphics mode framebuffer video drivers. These can give you a higher
resolution in your VTs, 1024x768, 1280x1024, even higher, and are thus
often favored by those preferring to work in a CLI most of the time.
When these are used in CLI mode, one doesn't use the regular X drivers for
their hardware, but instead, the framebuffer drivers. Most of the time,
this means less efficient acceleration in X mode, particularly 3D/OpenGL,
but depending on the specific framebuffer driver and hardware used, some
acceleration is possible, so you aren't forced into unaccelerated
compatibility mode, at least. I've never used this mode so can't go into
much detail on it, but from my understanding, it means you use the same
resolution in both CLI/VT and X modes, and therefore, that
resolution-switching in X is disabled -- you have just the single
resolution to work with. Whether the lower level of acceleration and
single resolution limitation are acceptable to you or not I can't say, but
it /should/ eliminate the VT switching issue, because it's then the kernel
driver in direct control even within X -- aside from a few simple
optimizations possible at the framebuffer level, all the X driver does is
forward the video stuff to the kernel framebuffer driver, thus avoiding
the complexities of handing off control of the video hardware when
switching.
We're actually fairly lucky on Linux and amd64, as for some
hardware/OS platforms, the framebuffer drivers are all that X supports.
(From what I've read, X's drivers for the Radeon video hardware commonly
found in Apple's PowerPC arch are of this nature, framebuffer driver
support only.)
Back when the X/VT switch wasn't working for me, I contemplated going
framebuffer, particularly as I would have enjoyed the higher CLI/VT
resolution and don't do all that much 3D/OpenGL stuff (I'm not a big
gamer, the biggest driver of demand in the area), but two things put me
off from trying. One, I DO use X's resolution switching fairly
frequently, and didn't want to lose that. Two, the inconvenience of
reading up on and learning to configure both the kernel and X's
framebuffer drivers, along with the possibility that they didn't support
dual monitors at all. I don't know if that's supported by the framebuffer
drivers or not, but that would certainly make the configuration more
complex, and I had no intention of giving up my dual 21" monitors,
1600x1200 stacked for 1600x2400 total resolution, just to get working VT
switching back. Together, those factors were enough to discourage me from
pursuing the idea any further, but it might be something you'd find easier
to live with.
--
Duncan - List replies preferred. No HTML msgs.
"Every nonfree program has a lord, a master --
and if you use the program, he is your master." Richard Stallman
--
gentoo-amd64@gentoo.org mailing list
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2006-08-09 14:15 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-08-08 15:05 [gentoo-amd64] X crashing so oftenly jai kumar
2006-08-08 16:15 ` jai kumar
2006-08-08 19:17 ` Bob Slawson
2006-08-09 14:13 ` [gentoo-amd64] " Duncan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox