public inbox for gentoo-amd64@lists.gentoo.org
 help / color / mirror / Atom feed
From: jai kumar <jaikumar1004_in@yahoo.co.in>
To: gentoo-amd64@lists.gentoo.org
Subject: Re: [gentoo-amd64]emerge make my comp slow :(
Date: Sat, 5 Aug 2006 21:01:20 +0100 (BST)	[thread overview]
Message-ID: <20060805200120.18145.qmail@web8607.mail.in.yahoo.com> (raw)
In-Reply-To: <20060805194151.79195.qmail@web8610.mail.in.yahoo.com>

[-- Attachment #1: Type: text/plain, Size: 4715 bytes --]

Guess what .... dma is not enabled 
----------------------------------------------------------------
flukebox flukebox # hdparm /dev/sda | grep dma
flukebox flukebox #
------------------------------------------------------------------  
well i Guess i got my enemy..........but i didn't know whether i had choosen wrong sata drivers in kernel.
Here is some info regarding what going on in my comp.

------------------------------------------------------------------------------------------
flukebox flukebox # dmesg |grep dma
ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x9402 bmdma 0xA000 irq 177
ata2: SATA max UDMA/133 cmd 0x9800 ctl 0x9C02 bmdma 0xA008 irq 177
flukebox flukebox # dmesg |grep via
bus pci: add driver sata_via
pci: Matched Device 0000:00:0f.0 with Driver sata_via
sata_via 0000:00:0f.0: version 1.1
sata_via 0000:00:0f.0: routed to hard irq line 1
scsi0 : sata_via
scsi1 : sata_via
bound device '0000:00:0f.0' to driver 'sata_via'
pci: Bound Device 0000:00:0f.0 to Driver sata_via
flukebox flukebox # lspci
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01)
---------------------------------------------------------------------------------------------
~jaiks



jai kumar <jaikumar1004_in@yahoo.co.in> wrote: Sorry for responding so late.
        unfortunately while doing regular "emerge-websync" and after that
" emerge  --update --deep world"  did updated my libexpat.so.0 to libexpat.so.1 .....so when i reboot my comp nothing was working.
i have to link libexpat.so.0 to libexpat.so.1 but i didn't know that before :(.
---------------------------------------------------------------------------------------------

  Well, I have a SERIAL mouse and an USB  keyboard.
  i will tell you more after applying the changes suggested.

~jaiks



 
Reinhard Kotucha <reinhard.kotucha@web.de> wrote: >>>>> "Rodrigo" == Rodrigo Gnoatto Amaral  writes:

  > I had this problem only with USB mouses.

This is  interesting.

Does it make a difference whether USB support is compiled into the
kernel or if it is a kernel module?

Jai, do you have an USB mouse too?

Regards,
  Reinhard

-- 
----------------------------------------------------------------------------
Reinhard Kotucha                 Phone: +49-511-4592165
Marschnerstr. 25
D-30167 Hannover                       mailto:reinhard.kotucha@web.de
----------------------------------------------------------------------------
Microsoft isn't the answer. Microsoft is the question, and the answer is NO.
----------------------------------------------------------------------------


-- 
gentoo-amd64@gentoo.org mailing list


         

---------------------------------
  Here’s a new way to find what you're looking for - Yahoo! Answers 

 				
---------------------------------
 Here’s a new way to find what you're looking for - Yahoo! Answers 

[-- Attachment #2: Type: text/html, Size: 5478 bytes --]

  reply	other threads:[~2006-08-05 20:03 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-08-04 13:10 [gentoo-amd64] cisco vpn : cvpnd hangs Jonathan Schaeffer
2006-08-04 14:10 ` Kevin F. Quinn
2006-08-04 14:17   ` Jonathan Schaeffer
2006-08-04 17:23 ` [gentoo-amd64]emerge make my comp slow :( jai kumar
2006-08-04 17:30   ` Simon Stelling
2006-08-04 17:33   ` Mihir Sevak
2006-08-04 21:37     ` Reinhard Kotucha
2006-08-04 22:00       ` Mihir Sevak
2006-08-04 22:04         ` Rodrigo Gnoatto Amaral
2006-08-04 22:07           ` Mihir Sevak
2006-08-04 22:30           ` Reinhard Kotucha
2006-08-04 22:35             ` Mihir Sevak
2006-08-05 19:41             ` jai kumar
2006-08-05 20:01               ` jai kumar [this message]
2006-08-05 20:13                 ` jai kumar
2006-08-05 21:16                   ` Richard Fish
2006-08-05 21:15                 ` Richard Fish
2006-08-05 21:29               ` Hemmann, Volker Armin
2006-08-04 23:05           ` Gary E. Miller
2006-08-05  5:25       ` [gentoo-amd64] emerge " J'raxis 270145
2006-08-04 23:15   ` [gentoo-amd64]emerge " Hemmann, Volker Armin
2006-08-05  9:11     ` yoshi watanabe
2006-08-05 12:51       ` Mihir Sevak
2006-08-05 13:12         ` Will Briggs
2006-08-05 15:13         ` Hemmann, Volker Armin
2006-08-05 17:56           ` Luigi Cristalli
2006-08-06 15:42       ` Paul de Vrieze
2006-08-06 20:55         ` jai kumar
2006-08-06 23:39           ` Richard Fish
2006-08-07 14:12             ` jai kumar
2006-08-07 15:32               ` Hemmann, Volker Armin
2006-08-07 16:12                 ` jai kumar
2006-08-05  0:40   ` Luigi Cristalli
2006-08-05  5:44     ` [gentoo-amd64] Re: emerge " Duncan
2006-08-05 23:48 ` [gentoo-amd64] Re: cisco vpn : cvpnd hangs Michael Hordijk
2006-08-07  6:52   ` Jonathan Schaeffer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060805200120.18145.qmail@web8607.mail.in.yahoo.com \
    --to=jaikumar1004_in@yahoo.co.in \
    --cc=gentoo-amd64@lists.gentoo.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox