public inbox for gentoo-alpha@lists.gentoo.org
 help / color / mirror / Atom feed
* [gentoo-alpha] Installation on a DS20
@ 2005-09-23 13:17 Grant Hill
  2005-09-23 13:50 ` Nils o. Janus
  0 siblings, 1 reply; 9+ messages in thread
From: Grant Hill @ 2005-09-23 13:17 UTC (permalink / raw
  To: gentoo-alpha

Hi all,

I'm trying to install on a DS20, everything went OK until I rebooted and
I got a kernel panic almost straight away. I can't really read the
interesting part of the panic as it scrolls off the screen far too
quickly and if there's a way to scroll up and read it I don't know it.

I've got another DS20 running gentoo via the now defunct alpha-sources
so I'm guessing it could be something to do with the 2.6 kernel on this
machine?

Any ideas?

TIA

Grant Hill 

-- 
gentoo-alpha@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [gentoo-alpha] Installation on a DS20
  2005-09-23 13:17 [gentoo-alpha] Installation on a DS20 Grant Hill
@ 2005-09-23 13:50 ` Nils o. Janus
  2005-09-23 14:16   ` Fabien Gaurand
  2005-09-23 15:09   ` Grant Hill
  0 siblings, 2 replies; 9+ messages in thread
From: Nils o. Janus @ 2005-09-23 13:50 UTC (permalink / raw
  To: gentoo-alpha

Hi Grant,

If you reached the level that your box boots up with a 2.6 kernel,
then the panic might not have to do with the problem other users faced.
I faced the fact that my DS20e's didnt event boot with a 2.6 kernel,
the system just froze at the SRM.
Since those boxed were needed in a production-environment, I switched back
to kernel 2.4 ( vanilla-sources ).
So the advice I can give is to use a 2.4 kernel as well, as during the
previous weeks no one reported a succesfull installation of a 2.6 kernel
on this mailinglist.

so long
Nils

On Fri, 23 Sep 2005 15:17:52 +0200, Grant Hill <jgh105@york.ac.uk> wrote:

> Hi all,
>
> I'm trying to install on a DS20, everything went OK until I rebooted and
> I got a kernel panic almost straight away. I can't really read the
> interesting part of the panic as it scrolls off the screen far too
> quickly and if there's a way to scroll up and read it I don't know it.
>
> I've got another DS20 running gentoo via the now defunct alpha-sources
> so I'm guessing it could be something to do with the 2.6 kernel on this
> machine?
>
> Any ideas?
>
> TIA
>
> Grant Hill
>


-- 
gentoo-alpha@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [gentoo-alpha] Installation on a DS20
  2005-09-23 13:50 ` Nils o. Janus
@ 2005-09-23 14:16   ` Fabien Gaurand
  2005-09-23 14:30     ` Jeff Donsbach
  2005-09-23 15:09   ` Grant Hill
  1 sibling, 1 reply; 9+ messages in thread
From: Fabien Gaurand @ 2005-09-23 14:16 UTC (permalink / raw
  To: gentoo-alpha

[-- Attachment #1: Type: text/plain, Size: 537 bytes --]

Nils o. Janus wrote:

>
> So the advice I can give is to use a 2.4 kernel as well, as during the
> previous weeks no one reported a succesfull installation of a 2.6 kernel
> on this mailinglist.

My DS20 is running a vanilla 2.6 kernel since march 2005 and I didn't
have any particular problem :
# uname -a
Linux clairett 2.6.11.8 #1 SMP Mon Aug 1 13:38:00 CEST 2005 alpha EV6 
GNU/Linux
# uptime
14:34:57 up 53 days, 49 min,  2 users,  load average: 0.00, 0.01, 0.07

Attached to this mail is the kernel config I'm using

Rgds

Fabien


[-- Attachment #2: config-2.6.11.8 --]
[-- Type: text/plain, Size: 18483 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11.8
# Mon Aug  1 13:20:55 2005
#
CONFIG_ALPHA=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_GENERIC_IOMAP is not set

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# System setup
#
# CONFIG_ALPHA_GENERIC is not set
# CONFIG_ALPHA_ALCOR is not set
# CONFIG_ALPHA_XL is not set
# CONFIG_ALPHA_BOOK1 is not set
# CONFIG_ALPHA_AVANTI_CH is not set
# CONFIG_ALPHA_CABRIOLET is not set
CONFIG_ALPHA_DP264=y
# CONFIG_ALPHA_EB164 is not set
# CONFIG_ALPHA_EB64P_CH is not set
# CONFIG_ALPHA_EB66 is not set
# CONFIG_ALPHA_EB66P is not set
# CONFIG_ALPHA_EIGER is not set
# CONFIG_ALPHA_JENSEN is not set
# CONFIG_ALPHA_LX164 is not set
# CONFIG_ALPHA_LYNX is not set
# CONFIG_ALPHA_MARVEL is not set
# CONFIG_ALPHA_MIATA is not set
# CONFIG_ALPHA_MIKASA is not set
# CONFIG_ALPHA_NAUTILUS is not set
# CONFIG_ALPHA_NONAME_CH is not set
# CONFIG_ALPHA_NORITAKE is not set
# CONFIG_ALPHA_PC164 is not set
# CONFIG_ALPHA_P2K is not set
# CONFIG_ALPHA_RAWHIDE is not set
# CONFIG_ALPHA_RUFFIAN is not set
# CONFIG_ALPHA_RX164 is not set
# CONFIG_ALPHA_SX164 is not set
# CONFIG_ALPHA_SABLE is not set
# CONFIG_ALPHA_SHARK is not set
# CONFIG_ALPHA_TAKARA is not set
# CONFIG_ALPHA_TITAN is not set
# CONFIG_ALPHA_WILDFIRE is not set
CONFIG_ISA=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_ALPHA_EV6=y
CONFIG_ALPHA_TSUNAMI=y
# CONFIG_ALPHA_EV67 is not set
CONFIG_ALPHA_SRM=y
CONFIG_SMP=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_NR_CPUS=2
# CONFIG_DISCONTIGMEM is not set
CONFIG_VERBOSE_MCHECK=y
CONFIG_VERBOSE_MCHECK_ON=1
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PC-card bridges
#
CONFIG_PCMCIA_PROBE=y
CONFIG_SRM_ENV=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_EM86 is not set
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_ISAPNP=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
CONFIG_BLK_DEV_CY82C693=y
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=y
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
# CONFIG_FB is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_EARLY_PRINTK=y
CONFIG_ALPHA_LEGACY_START_ADDRESS=y
CONFIG_MATHEMU=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Hardware crypto devices
#

#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [gentoo-alpha] Installation on a DS20
  2005-09-23 14:16   ` Fabien Gaurand
@ 2005-09-23 14:30     ` Jeff Donsbach
  2005-09-23 16:32       ` Grant Hill
  2005-09-26 13:51       ` Nils o. Janus
  0 siblings, 2 replies; 9+ messages in thread
From: Jeff Donsbach @ 2005-09-23 14:30 UTC (permalink / raw
  To: gentoo-alpha


Just for the sake of collecting data on this issue,
for people who have not been able to boot a 2.6 kernel
so far, what kind of graphics cards do you have in
your machines?

Jeff D

--- Fabien Gaurand <fabien.gaurand@usa.net> wrote:

> Nils o. Janus wrote:
> 
> >
> > So the advice I can give is to use a 2.4 kernel as
> well, as during the
> > previous weeks no one reported a succesfull
> installation of a 2.6 kernel
> > on this mailinglist.
> 
> My DS20 is running a vanilla 2.6 kernel since march
> 2005 and I didn't
> have any particular problem :
> # uname -a
> Linux clairett 2.6.11.8 #1 SMP Mon Aug 1 13:38:00
> CEST 2005 alpha EV6 
> GNU/Linux
> # uptime
> 14:34:57 up 53 days, 49 min,  2 users,  load
> average: 0.00, 0.01, 0.07
> 
> Attached to this mail is the kernel config I'm using
> 
> Rgds
> 
> Fabien
> 
> > #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.11.8
> # Mon Aug  1 13:20:55 2005
> #
> CONFIG_ALPHA=y
> CONFIG_64BIT=y
> CONFIG_MMU=y
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_GENERIC_ISA_DMA=y
> # CONFIG_GENERIC_IOMAP is not set
> 
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_CLEAN_COMPILE=y
> CONFIG_LOCK_KERNEL=y
> 
> #
> # General setup
> #
> CONFIG_LOCALVERSION=""
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_POSIX_MQUEUE=y
> CONFIG_BSD_PROCESS_ACCT=y
> # CONFIG_BSD_PROCESS_ACCT_V3 is not set
> CONFIG_SYSCTL=y
> # CONFIG_AUDIT is not set
> CONFIG_LOG_BUF_SHIFT=15
> CONFIG_HOTPLUG=y
> CONFIG_KOBJECT_UEVENT=y
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> # CONFIG_EMBEDDED is not set
> CONFIG_KALLSYMS=y
> # CONFIG_KALLSYMS_EXTRA_PASS is not set
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
> CONFIG_SHMEM=y
> CONFIG_CC_ALIGN_FUNCTIONS=0
> CONFIG_CC_ALIGN_LABELS=0
> CONFIG_CC_ALIGN_LOOPS=0
> CONFIG_CC_ALIGN_JUMPS=0
> # CONFIG_TINY_SHMEM is not set
> 
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> # CONFIG_MODULE_FORCE_UNLOAD is not set
> CONFIG_OBSOLETE_MODPARM=y
> # CONFIG_MODVERSIONS is not set
> # CONFIG_MODULE_SRCVERSION_ALL is not set
> CONFIG_KMOD=y
> CONFIG_STOP_MACHINE=y
> 
> #
> # System setup
> #
> # CONFIG_ALPHA_GENERIC is not set
> # CONFIG_ALPHA_ALCOR is not set
> # CONFIG_ALPHA_XL is not set
> # CONFIG_ALPHA_BOOK1 is not set
> # CONFIG_ALPHA_AVANTI_CH is not set
> # CONFIG_ALPHA_CABRIOLET is not set
> CONFIG_ALPHA_DP264=y
> # CONFIG_ALPHA_EB164 is not set
> # CONFIG_ALPHA_EB64P_CH is not set
> # CONFIG_ALPHA_EB66 is not set
> # CONFIG_ALPHA_EB66P is not set
> # CONFIG_ALPHA_EIGER is not set
> # CONFIG_ALPHA_JENSEN is not set
> # CONFIG_ALPHA_LX164 is not set
> # CONFIG_ALPHA_LYNX is not set
> # CONFIG_ALPHA_MARVEL is not set
> # CONFIG_ALPHA_MIATA is not set
> # CONFIG_ALPHA_MIKASA is not set
> # CONFIG_ALPHA_NAUTILUS is not set
> # CONFIG_ALPHA_NONAME_CH is not set
> # CONFIG_ALPHA_NORITAKE is not set
> # CONFIG_ALPHA_PC164 is not set
> # CONFIG_ALPHA_P2K is not set
> # CONFIG_ALPHA_RAWHIDE is not set
> # CONFIG_ALPHA_RUFFIAN is not set
> # CONFIG_ALPHA_RX164 is not set
> # CONFIG_ALPHA_SX164 is not set
> # CONFIG_ALPHA_SABLE is not set
> # CONFIG_ALPHA_SHARK is not set
> # CONFIG_ALPHA_TAKARA is not set
> # CONFIG_ALPHA_TITAN is not set
> # CONFIG_ALPHA_WILDFIRE is not set
> CONFIG_ISA=y
> CONFIG_PCI=y
> CONFIG_PCI_DOMAINS=y
> CONFIG_ALPHA_EV6=y
> CONFIG_ALPHA_TSUNAMI=y
> # CONFIG_ALPHA_EV67 is not set
> CONFIG_ALPHA_SRM=y
> CONFIG_SMP=y
> CONFIG_HAVE_DEC_LOCK=y
> CONFIG_NR_CPUS=2
> # CONFIG_DISCONTIGMEM is not set
> CONFIG_VERBOSE_MCHECK=y
> CONFIG_VERBOSE_MCHECK_ON=1
> # CONFIG_PCI_LEGACY_PROC is not set
> CONFIG_PCI_NAMES=y
> 
> #
> # PCCARD (PCMCIA/CardBus) support
> #
> # CONFIG_PCCARD is not set
> 
> #
> # PC-card bridges
> #
> CONFIG_PCMCIA_PROBE=y
> CONFIG_SRM_ENV=y
> CONFIG_BINFMT_ELF=y
> # CONFIG_BINFMT_AOUT is not set
> # CONFIG_BINFMT_EM86 is not set
> CONFIG_BINFMT_MISC=y
> 
> #
> # Device Drivers
> #
> 
> #
> # Generic Driver Options
> #
> # CONFIG_STANDALONE is not set
> # CONFIG_PREVENT_FIRMWARE_BUILD is not set
> # CONFIG_FW_LOADER is not set
> 
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
> 
> #
> # Parallel port support
> #
> CONFIG_PARPORT=y
> CONFIG_PARPORT_PC=y
> CONFIG_PARPORT_PC_CML1=y
> # CONFIG_PARPORT_SERIAL is not set
> CONFIG_PARPORT_PC_FIFO=y
> CONFIG_PARPORT_PC_SUPERIO=y
> # CONFIG_PARPORT_OTHER is not set
> CONFIG_PARPORT_1284=y
> 
> #
> # Plug and Play support
> #
> CONFIG_PNP=y
> # CONFIG_PNP_DEBUG is not set
> 
> #
> # Protocols
> #
> CONFIG_ISAPNP=y
> 
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> # CONFIG_BLK_DEV_XD is not set
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=y
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> CONFIG_BLK_DEV_NBD=y
> # CONFIG_BLK_DEV_SX8 is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=4096
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_INITRAMFS_SOURCE=""
> # CONFIG_CDROM_PKTCDVD is not set
> 
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_ATA_OVER_ETH is not set
> 
> #
> # ATA/ATAPI/MFM/RLL support
> #
> CONFIG_IDE=y
> 
=== message truncated ===


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-- 
gentoo-alpha@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [gentoo-alpha] Installation on a DS20
  2005-09-23 13:50 ` Nils o. Janus
  2005-09-23 14:16   ` Fabien Gaurand
@ 2005-09-23 15:09   ` Grant Hill
  2005-09-23 15:24     ` Davide Cittaro
  1 sibling, 1 reply; 9+ messages in thread
From: Grant Hill @ 2005-09-23 15:09 UTC (permalink / raw
  To: gentoo-alpha

> So the advice I can give is to use a 2.4 kernel as well, as during the
> previous weeks no one reported a succesfull installation of a 2.6 kernel
> on this mailinglist.

Thanks, switching to a 2.4 kernel (when I figured out that I needed to
change profile to get one :) ) has worked for me.

Thanks again,

Grant

-- 
gentoo-alpha@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [gentoo-alpha] Installation on a DS20
  2005-09-23 15:09   ` Grant Hill
@ 2005-09-23 15:24     ` Davide Cittaro
  2005-09-23 15:48       ` Jeff Donsbach
  0 siblings, 1 reply; 9+ messages in thread
From: Davide Cittaro @ 2005-09-23 15:24 UTC (permalink / raw
  To: gentoo-alpha

I definetly envy you all! Here I cannot make it run (I'm thinking  
about switching to netbsd...) this damn DS25! One of these days  
you'll hear about a flying alpha (36 kg out of the window).
I tried to install gentoo 2005.0, stage1, 2.4 profile and latest  
portage and it stops during bootstrap.

d
On Sep 23, 2005, at 5:09 PM, Grant Hill wrote:

>> So the advice I can give is to use a 2.4 kernel as well, as during  
>> the
>> previous weeks no one reported a succesfull installation of a 2.6  
>> kernel
>> on this mailinglist.
>>
>
> Thanks, switching to a 2.4 kernel (when I figured out that I needed to
> change profile to get one :) ) has worked for me.
>
> Thanks again,
>
> Grant
>
> -- 
> gentoo-alpha@gentoo.org mailing list
>
>

-- 
gentoo-alpha@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [gentoo-alpha] Installation on a DS20
  2005-09-23 15:24     ` Davide Cittaro
@ 2005-09-23 15:48       ` Jeff Donsbach
  0 siblings, 0 replies; 9+ messages in thread
From: Jeff Donsbach @ 2005-09-23 15:48 UTC (permalink / raw
  To: gentoo-alpha


The DS25 is pretty new and iirc, has a different
chipset than the DS20 or DS20E . Let me ask around and
see what special configuration it might need, if any.


--- Davide Cittaro <daweonline@gmail.com> wrote:

> I definetly envy you all! Here I cannot make it run
> (I'm thinking  
> about switching to netbsd...) this damn DS25! One of
> these days  
> you'll hear about a flying alpha (36 kg out of the
> window).
> I tried to install gentoo 2005.0, stage1, 2.4
> profile and latest  
> portage and it stops during bootstrap.
> 
> d


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-- 
gentoo-alpha@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [gentoo-alpha] Installation on a DS20
  2005-09-23 14:30     ` Jeff Donsbach
@ 2005-09-23 16:32       ` Grant Hill
  2005-09-26 13:51       ` Nils o. Janus
  1 sibling, 0 replies; 9+ messages in thread
From: Grant Hill @ 2005-09-23 16:32 UTC (permalink / raw
  To: gentoo-alpha

On 23 Sep 2005, at 15:30, Jeff Donsbach wrote:
>
> Just for the sake of collecting data on this issue,
> for people who have not been able to boot a 2.6 kernel
> so far, what kind of graphics cards do you have in
> your machines?
>
> Jeff D

The machine I've been having trouble has an ELSA Gloria Synergy card  
- if you need more info let me know and I'll see what I can extract.

Cheers,

Grant
-- 
gentoo-alpha@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [gentoo-alpha] Installation on a DS20
  2005-09-23 14:30     ` Jeff Donsbach
  2005-09-23 16:32       ` Grant Hill
@ 2005-09-26 13:51       ` Nils o. Janus
  1 sibling, 0 replies; 9+ messages in thread
From: Nils o. Janus @ 2005-09-26 13:51 UTC (permalink / raw
  To: gentoo-alpha

On Fri, 23 Sep 2005 16:30:01 +0200, Jeff Donsbach  
<jeff_donsbach@yahoo.com> wrote:

>
> Just for the sake of collecting data on this issue,
> for people who have not been able to boot a 2.6 kernel
> so far, what kind of graphics cards do you have in
> your machines?
>
> Jeff D

Hi Jeff,

just like the Boxes of Grant, my DS20s contain ELSA Synergy cards as well.

Nils
-- 
gentoo-alpha@gentoo.org mailing list



^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2005-09-26 13:52 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-09-23 13:17 [gentoo-alpha] Installation on a DS20 Grant Hill
2005-09-23 13:50 ` Nils o. Janus
2005-09-23 14:16   ` Fabien Gaurand
2005-09-23 14:30     ` Jeff Donsbach
2005-09-23 16:32       ` Grant Hill
2005-09-26 13:51       ` Nils o. Janus
2005-09-23 15:09   ` Grant Hill
2005-09-23 15:24     ` Davide Cittaro
2005-09-23 15:48       ` Jeff Donsbach

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox