From: "orbea" <orbea@riseup.net>
To: gentoo-commits@lists.gentoo.org
Subject: [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/hostapd/, net-wireless/hostapd/files/
Date: Tue, 14 Nov 2023 17:45:06 +0000 (UTC) [thread overview]
Message-ID: <1699982022.1a7188dde1875d965e5354e4e93d341cfde0b939.orbea@gentoo> (raw)
commit: 1a7188dde1875d965e5354e4e93d341cfde0b939
Author: orbea <orbea <AT> riseup <DOT> net>
AuthorDate: Tue Nov 14 17:13:42 2023 +0000
Commit: orbea <orbea <AT> riseup <DOT> net>
CommitDate: Tue Nov 14 17:13:42 2023 +0000
URL: https://gitweb.gentoo.org/repo/proj/libressl.git/commit/?id=1a7188dd
net-wireless/hostapd: add 2.10-r3
Signed-off-by: orbea <orbea <AT> riseup.net>
...-not-allow-event-subscriptions-with-URLs-.patch | 150 ------------
...x-event-message-generation-using-a-long-U.patch | 59 -----
...ndle-HTTP-initiation-failures-for-events-.patch | 47 ----
...y-ignore-management-frame-from-unexpected.patch | 73 ------
...date-DigestAlgorithmIdentifier-parameters.patch | 115 ---------
net-wireless/hostapd/files/hostapd-conf.d | 9 +
net-wireless/hostapd/files/hostapd-init.d | 38 +++
net-wireless/hostapd/files/hostapd.service | 9 +
net-wireless/hostapd/hostapd-2.10-r3.ebuild | 266 +++++++++++++++++++++
9 files changed, 322 insertions(+), 444 deletions(-)
diff --git a/net-wireless/hostapd/files/hostapd-2.9-0001-WPS-UPnP-Do-not-allow-event-subscriptions-with-URLs-.patch b/net-wireless/hostapd/files/hostapd-2.9-0001-WPS-UPnP-Do-not-allow-event-subscriptions-with-URLs-.patch
deleted file mode 100644
index 0aa8a5e..0000000
--- a/net-wireless/hostapd/files/hostapd-2.9-0001-WPS-UPnP-Do-not-allow-event-subscriptions-with-URLs-.patch
+++ /dev/null
@@ -1,150 +0,0 @@
-From 5b78c8f961f25f4dc22d6f2b77ddd06d712cec63 Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <jouni@codeaurora.org>
-Date: Wed, 3 Jun 2020 23:17:35 +0300
-Subject: [PATCH 1/3] WPS UPnP: Do not allow event subscriptions with URLs to
- other networks
-
-The UPnP Device Architecture 2.0 specification errata ("UDA errata
-16-04-2020.docx") addresses a problem with notifications being allowed
-to go out to other domains by disallowing such cases. Do such filtering
-for the notification callback URLs to avoid undesired connections to
-external networks based on subscriptions that any device in the local
-network could request when WPS support for external registrars is
-enabled (the upnp_iface parameter in hostapd configuration).
-
-Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
----
- src/wps/wps_er.c | 2 +-
- src/wps/wps_upnp.c | 38 ++++++++++++++++++++++++++++++++++++--
- src/wps/wps_upnp_i.h | 3 ++-
- 3 files changed, 39 insertions(+), 4 deletions(-)
-
-diff --git a/src/wps/wps_er.c b/src/wps/wps_er.c
-index 6bded14327f8..31d2e50e4cff 100644
---- a/src/wps/wps_er.c
-+++ b/src/wps/wps_er.c
-@@ -1298,7 +1298,7 @@ wps_er_init(struct wps_context *wps, const char *ifname, const char *filter)
- "with %s", filter);
- }
- if (get_netif_info(er->ifname, &er->ip_addr, &er->ip_addr_text,
-- er->mac_addr)) {
-+ NULL, er->mac_addr)) {
- wpa_printf(MSG_INFO, "WPS UPnP: Could not get IP/MAC address "
- "for %s. Does it have IP address?", er->ifname);
- wps_er_deinit(er, NULL, NULL);
-diff --git a/src/wps/wps_upnp.c b/src/wps/wps_upnp.c
-index 6e10e4bc0c3f..7d4b7439940e 100644
---- a/src/wps/wps_upnp.c
-+++ b/src/wps/wps_upnp.c
-@@ -303,6 +303,14 @@ static void subscr_addr_free_all(struct subscription *s)
- }
-
-
-+static int local_network_addr(struct upnp_wps_device_sm *sm,
-+ struct sockaddr_in *addr)
-+{
-+ return (addr->sin_addr.s_addr & sm->netmask.s_addr) ==
-+ (sm->ip_addr & sm->netmask.s_addr);
-+}
-+
-+
- /* subscr_addr_add_url -- add address(es) for one url to subscription */
- static void subscr_addr_add_url(struct subscription *s, const char *url,
- size_t url_len)
-@@ -381,6 +389,7 @@ static void subscr_addr_add_url(struct subscription *s, const char *url,
-
- for (rp = result; rp; rp = rp->ai_next) {
- struct subscr_addr *a;
-+ struct sockaddr_in *addr = (struct sockaddr_in *) rp->ai_addr;
-
- /* Limit no. of address to avoid denial of service attack */
- if (dl_list_len(&s->addr_list) >= MAX_ADDR_PER_SUBSCRIPTION) {
-@@ -389,6 +398,13 @@ static void subscr_addr_add_url(struct subscription *s, const char *url,
- break;
- }
-
-+ if (!local_network_addr(s->sm, addr)) {
-+ wpa_printf(MSG_INFO,
-+ "WPS UPnP: Ignore a delivery URL that points to another network %s",
-+ inet_ntoa(addr->sin_addr));
-+ continue;
-+ }
-+
- a = os_zalloc(sizeof(*a) + alloc_len);
- if (a == NULL)
- break;
-@@ -890,11 +906,12 @@ static int eth_get(const char *device, u8 ea[ETH_ALEN])
- * @net_if: Selected network interface name
- * @ip_addr: Buffer for returning IP address in network byte order
- * @ip_addr_text: Buffer for returning a pointer to allocated IP address text
-+ * @netmask: Buffer for returning netmask or %NULL if not needed
- * @mac: Buffer for returning MAC address
- * Returns: 0 on success, -1 on failure
- */
- int get_netif_info(const char *net_if, unsigned *ip_addr, char **ip_addr_text,
-- u8 mac[ETH_ALEN])
-+ struct in_addr *netmask, u8 mac[ETH_ALEN])
- {
- struct ifreq req;
- int sock = -1;
-@@ -920,6 +937,19 @@ int get_netif_info(const char *net_if, unsigned *ip_addr, char **ip_addr_text,
- in_addr.s_addr = *ip_addr;
- os_snprintf(*ip_addr_text, 16, "%s", inet_ntoa(in_addr));
-
-+ if (netmask) {
-+ os_memset(&req, 0, sizeof(req));
-+ os_strlcpy(req.ifr_name, net_if, sizeof(req.ifr_name));
-+ if (ioctl(sock, SIOCGIFNETMASK, &req) < 0) {
-+ wpa_printf(MSG_ERROR,
-+ "WPS UPnP: SIOCGIFNETMASK failed: %d (%s)",
-+ errno, strerror(errno));
-+ goto fail;
-+ }
-+ addr = (struct sockaddr_in *) &req.ifr_netmask;
-+ netmask->s_addr = addr->sin_addr.s_addr;
-+ }
-+
- #ifdef __linux__
- os_strlcpy(req.ifr_name, net_if, sizeof(req.ifr_name));
- if (ioctl(sock, SIOCGIFHWADDR, &req) < 0) {
-@@ -1026,11 +1056,15 @@ static int upnp_wps_device_start(struct upnp_wps_device_sm *sm, char *net_if)
-
- /* Determine which IP and mac address we're using */
- if (get_netif_info(net_if, &sm->ip_addr, &sm->ip_addr_text,
-- sm->mac_addr)) {
-+ &sm->netmask, sm->mac_addr)) {
- wpa_printf(MSG_INFO, "WPS UPnP: Could not get IP/MAC address "
- "for %s. Does it have IP address?", net_if);
- goto fail;
- }
-+ wpa_printf(MSG_DEBUG, "WPS UPnP: Local IP address %s netmask %s hwaddr "
-+ MACSTR,
-+ sm->ip_addr_text, inet_ntoa(sm->netmask),
-+ MAC2STR(sm->mac_addr));
-
- /* Listen for incoming TCP connections so that others
- * can fetch our "xml files" from us.
-diff --git a/src/wps/wps_upnp_i.h b/src/wps/wps_upnp_i.h
-index e87a93232df1..6ead7b4e9a30 100644
---- a/src/wps/wps_upnp_i.h
-+++ b/src/wps/wps_upnp_i.h
-@@ -128,6 +128,7 @@ struct upnp_wps_device_sm {
- u8 mac_addr[ETH_ALEN]; /* mac addr of network i.f. we use */
- char *ip_addr_text; /* IP address of network i.f. we use */
- unsigned ip_addr; /* IP address of network i.f. we use (host order) */
-+ struct in_addr netmask;
- int multicast_sd; /* send multicast messages over this socket */
- int ssdp_sd; /* receive discovery UPD packets on socket */
- int ssdp_sd_registered; /* nonzero if we must unregister */
-@@ -158,7 +159,7 @@ struct subscription * subscription_find(struct upnp_wps_device_sm *sm,
- const u8 uuid[UUID_LEN]);
- void subscr_addr_delete(struct subscr_addr *a);
- int get_netif_info(const char *net_if, unsigned *ip_addr, char **ip_addr_text,
-- u8 mac[ETH_ALEN]);
-+ struct in_addr *netmask, u8 mac[ETH_ALEN]);
-
- /* wps_upnp_ssdp.c */
- void msearchreply_state_machine_stop(struct advertisement_state_machine *a);
---
-2.20.1
-
diff --git a/net-wireless/hostapd/files/hostapd-2.9-0002-WPS-UPnP-Fix-event-message-generation-using-a-long-U.patch b/net-wireless/hostapd/files/hostapd-2.9-0002-WPS-UPnP-Fix-event-message-generation-using-a-long-U.patch
deleted file mode 100644
index c7a449e..0000000
--- a/net-wireless/hostapd/files/hostapd-2.9-0002-WPS-UPnP-Fix-event-message-generation-using-a-long-U.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From f7d268864a2660b7239b9a8ff5ad37faeeb751ba Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <jouni@codeaurora.org>
-Date: Wed, 3 Jun 2020 22:41:02 +0300
-Subject: [PATCH 2/3] WPS UPnP: Fix event message generation using a long URL
- path
-
-More than about 700 character URL ended up overflowing the wpabuf used
-for building the event notification and this resulted in the wpabuf
-buffer overflow checks terminating the hostapd process. Fix this by
-allocating the buffer to be large enough to contain the full URL path.
-However, since that around 700 character limit has been the practical
-limit for more than ten years, start explicitly enforcing that as the
-limit or the callback URLs since any longer ones had not worked before
-and there is no need to enable them now either.
-
-Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
----
- src/wps/wps_upnp.c | 9 +++++++--
- src/wps/wps_upnp_event.c | 3 ++-
- 2 files changed, 9 insertions(+), 3 deletions(-)
-
-diff --git a/src/wps/wps_upnp.c b/src/wps/wps_upnp.c
-index 7d4b7439940e..ab685d52ecab 100644
---- a/src/wps/wps_upnp.c
-+++ b/src/wps/wps_upnp.c
-@@ -328,9 +328,14 @@ static void subscr_addr_add_url(struct subscription *s, const char *url,
- int rerr;
- size_t host_len, path_len;
-
-- /* url MUST begin with http: */
-- if (url_len < 7 || os_strncasecmp(url, "http://", 7))
-+ /* URL MUST begin with HTTP scheme. In addition, limit the length of
-+ * the URL to 700 characters which is around the limit that was
-+ * implicitly enforced for more than 10 years due to a bug in
-+ * generating the event messages. */
-+ if (url_len < 7 || os_strncasecmp(url, "http://", 7) || url_len > 700) {
-+ wpa_printf(MSG_DEBUG, "WPS UPnP: Reject an unacceptable URL");
- goto fail;
-+ }
- url += 7;
- url_len -= 7;
-
-diff --git a/src/wps/wps_upnp_event.c b/src/wps/wps_upnp_event.c
-index d7e6edcc6503..08a23612f338 100644
---- a/src/wps/wps_upnp_event.c
-+++ b/src/wps/wps_upnp_event.c
-@@ -147,7 +147,8 @@ static struct wpabuf * event_build_message(struct wps_event_ *e)
- struct wpabuf *buf;
- char *b;
-
-- buf = wpabuf_alloc(1000 + wpabuf_len(e->data));
-+ buf = wpabuf_alloc(1000 + os_strlen(e->addr->path) +
-+ wpabuf_len(e->data));
- if (buf == NULL)
- return NULL;
- wpabuf_printf(buf, "NOTIFY %s HTTP/1.1\r\n", e->addr->path);
---
-2.20.1
-
diff --git a/net-wireless/hostapd/files/hostapd-2.9-0003-WPS-UPnP-Handle-HTTP-initiation-failures-for-events-.patch b/net-wireless/hostapd/files/hostapd-2.9-0003-WPS-UPnP-Handle-HTTP-initiation-failures-for-events-.patch
deleted file mode 100644
index 9d03760..0000000
--- a/net-wireless/hostapd/files/hostapd-2.9-0003-WPS-UPnP-Handle-HTTP-initiation-failures-for-events-.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 85aac526af8612c21b3117dadc8ef5944985b476 Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <jouni@codeaurora.org>
-Date: Thu, 4 Jun 2020 21:24:04 +0300
-Subject: [PATCH 3/3] WPS UPnP: Handle HTTP initiation failures for events more
- properly
-
-While it is appropriate to try to retransmit the event to another
-callback URL on a failure to initiate the HTTP client connection, there
-is no point in trying the exact same operation multiple times in a row.
-Replve the event_retry() calls with event_addr_failure() for these cases
-to avoid busy loops trying to repeat the same failing operation.
-
-These potential busy loops would go through eloop callbacks, so the
-process is not completely stuck on handling them, but unnecessary CPU
-would be used to process the continues retries that will keep failing
-for the same reason.
-
-Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
----
- src/wps/wps_upnp_event.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/src/wps/wps_upnp_event.c b/src/wps/wps_upnp_event.c
-index 08a23612f338..c0d9e41d9a38 100644
---- a/src/wps/wps_upnp_event.c
-+++ b/src/wps/wps_upnp_event.c
-@@ -294,7 +294,7 @@ static int event_send_start(struct subscription *s)
-
- buf = event_build_message(e);
- if (buf == NULL) {
-- event_retry(e, 0);
-+ event_addr_failure(e);
- return -1;
- }
-
-@@ -302,7 +302,7 @@ static int event_send_start(struct subscription *s)
- event_http_cb, e);
- if (e->http_event == NULL) {
- wpabuf_free(buf);
-- event_retry(e, 0);
-+ event_addr_failure(e);
- return -1;
- }
-
---
-2.20.1
-
diff --git a/net-wireless/hostapd/files/hostapd-2.9-AP-Silently-ignore-management-frame-from-unexpected.patch b/net-wireless/hostapd/files/hostapd-2.9-AP-Silently-ignore-management-frame-from-unexpected.patch
deleted file mode 100644
index d764a9d..0000000
--- a/net-wireless/hostapd/files/hostapd-2.9-AP-Silently-ignore-management-frame-from-unexpected.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 8c07fa9eda13e835f3f968b2e1c9a8be3a851ff9 Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <j@w1.fi>
-Date: Thu, 29 Aug 2019 11:52:04 +0300
-Subject: [PATCH] AP: Silently ignore management frame from unexpected source
- address
-
-Do not process any received Management frames with unexpected/invalid SA
-so that we do not add any state for unexpected STA addresses or end up
-sending out frames to unexpected destination. This prevents unexpected
-sequences where an unprotected frame might end up causing the AP to send
-out a response to another device and that other device processing the
-unexpected response.
-
-In particular, this prevents some potential denial of service cases
-where the unexpected response frame from the AP might result in a
-connected station dropping its association.
-
-Signed-off-by: Jouni Malinen <j@w1.fi>
----
- src/ap/drv_callbacks.c | 13 +++++++++++++
- src/ap/ieee802_11.c | 12 ++++++++++++
- 2 files changed, 25 insertions(+)
-
-diff --git a/src/ap/drv_callbacks.c b/src/ap/drv_callbacks.c
-index 31587685fe3b..34ca379edc3d 100644
---- a/src/ap/drv_callbacks.c
-+++ b/src/ap/drv_callbacks.c
-@@ -131,6 +131,19 @@ int hostapd_notif_assoc(struct hostapd_data *hapd, const u8 *addr,
- "hostapd_notif_assoc: Skip event with no address");
- return -1;
- }
-+
-+ if (is_multicast_ether_addr(addr) ||
-+ is_zero_ether_addr(addr) ||
-+ os_memcmp(addr, hapd->own_addr, ETH_ALEN) == 0) {
-+ /* Do not process any frames with unexpected/invalid SA so that
-+ * we do not add any state for unexpected STA addresses or end
-+ * up sending out frames to unexpected destination. */
-+ wpa_printf(MSG_DEBUG, "%s: Invalid SA=" MACSTR
-+ " in received indication - ignore this indication silently",
-+ __func__, MAC2STR(addr));
-+ return 0;
-+ }
-+
- random_add_randomness(addr, ETH_ALEN);
-
- hostapd_logger(hapd, addr, HOSTAPD_MODULE_IEEE80211,
-diff --git a/src/ap/ieee802_11.c b/src/ap/ieee802_11.c
-index c85a28db44b7..e7065372e158 100644
---- a/src/ap/ieee802_11.c
-+++ b/src/ap/ieee802_11.c
-@@ -4626,6 +4626,18 @@ int ieee802_11_mgmt(struct hostapd_data *hapd, const u8 *buf, size_t len,
- fc = le_to_host16(mgmt->frame_control);
- stype = WLAN_FC_GET_STYPE(fc);
-
-+ if (is_multicast_ether_addr(mgmt->sa) ||
-+ is_zero_ether_addr(mgmt->sa) ||
-+ os_memcmp(mgmt->sa, hapd->own_addr, ETH_ALEN) == 0) {
-+ /* Do not process any frames with unexpected/invalid SA so that
-+ * we do not add any state for unexpected STA addresses or end
-+ * up sending out frames to unexpected destination. */
-+ wpa_printf(MSG_DEBUG, "MGMT: Invalid SA=" MACSTR
-+ " in received frame - ignore this frame silently",
-+ MAC2STR(mgmt->sa));
-+ return 0;
-+ }
-+
- if (stype == WLAN_FC_STYPE_BEACON) {
- handle_beacon(hapd, mgmt, len, fi);
- return 1;
---
-2.20.1
-
diff --git a/net-wireless/hostapd/files/hostapd-2.9-ASN-1-Validate-DigestAlgorithmIdentifier-parameters.patch b/net-wireless/hostapd/files/hostapd-2.9-ASN-1-Validate-DigestAlgorithmIdentifier-parameters.patch
deleted file mode 100644
index 8c8ba93..0000000
--- a/net-wireless/hostapd/files/hostapd-2.9-ASN-1-Validate-DigestAlgorithmIdentifier-parameters.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From a0541334a6394f8237a4393b7372693cd7e96f15 Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <j@w1.fi>
-Date: Sat, 13 Mar 2021 18:19:31 +0200
-Subject: ASN.1: Validate DigestAlgorithmIdentifier parameters
-
-The supported hash algorithms do not use AlgorithmIdentifier parameters.
-However, there are implementations that include NULL parameters in
-addition to ones that omit the parameters. Previous implementation did
-not check the parameters value at all which supported both these cases,
-but did not reject any other unexpected information.
-
-Use strict validation of digest algorithm parameters and reject any
-unexpected value when validating a signature. This is needed to prevent
-potential forging attacks.
-
-Signed-off-by: Jouni Malinen <j@w1.fi>
----
- src/tls/pkcs1.c | 21 +++++++++++++++++++++
- src/tls/x509v3.c | 20 ++++++++++++++++++++
- 2 files changed, 41 insertions(+)
-
-diff --git a/src/tls/pkcs1.c b/src/tls/pkcs1.c
-index bbdb0d7..5761dfe 100644
---- a/src/tls/pkcs1.c
-+++ b/src/tls/pkcs1.c
-@@ -244,6 +244,8 @@ int pkcs1_v15_sig_ver(struct crypto_public_key *pk,
- os_free(decrypted);
- return -1;
- }
-+ wpa_hexdump(MSG_MSGDUMP, "PKCS #1: DigestInfo",
-+ hdr.payload, hdr.length);
-
- pos = hdr.payload;
- end = pos + hdr.length;
-@@ -265,6 +267,8 @@ int pkcs1_v15_sig_ver(struct crypto_public_key *pk,
- os_free(decrypted);
- return -1;
- }
-+ wpa_hexdump(MSG_MSGDUMP, "PKCS #1: DigestAlgorithmIdentifier",
-+ hdr.payload, hdr.length);
- da_end = hdr.payload + hdr.length;
-
- if (asn1_get_oid(hdr.payload, hdr.length, &oid, &next)) {
-@@ -273,6 +277,23 @@ int pkcs1_v15_sig_ver(struct crypto_public_key *pk,
- os_free(decrypted);
- return -1;
- }
-+ wpa_hexdump(MSG_MSGDUMP, "PKCS #1: Digest algorithm parameters",
-+ next, da_end - next);
-+
-+ /*
-+ * RFC 5754: The correct encoding for the SHA2 algorithms would be to
-+ * omit the parameters, but there are implementation that encode these
-+ * as a NULL element. Allow these two cases and reject anything else.
-+ */
-+ if (da_end > next &&
-+ (asn1_get_next(next, da_end - next, &hdr) < 0 ||
-+ !asn1_is_null(&hdr) ||
-+ hdr.payload + hdr.length != da_end)) {
-+ wpa_printf(MSG_DEBUG,
-+ "PKCS #1: Unexpected digest algorithm parameters");
-+ os_free(decrypted);
-+ return -1;
-+ }
-
- if (!asn1_oid_equal(&oid, hash_alg)) {
- char txt[100], txt2[100];
-diff --git a/src/tls/x509v3.c b/src/tls/x509v3.c
-index a8944dd..df337ec 100644
---- a/src/tls/x509v3.c
-+++ b/src/tls/x509v3.c
-@@ -1964,6 +1964,7 @@ int x509_check_signature(struct x509_certificate *issuer,
- os_free(data);
- return -1;
- }
-+ wpa_hexdump(MSG_MSGDUMP, "X509: DigestInfo", hdr.payload, hdr.length);
-
- pos = hdr.payload;
- end = pos + hdr.length;
-@@ -1985,6 +1986,8 @@ int x509_check_signature(struct x509_certificate *issuer,
- os_free(data);
- return -1;
- }
-+ wpa_hexdump(MSG_MSGDUMP, "X509: DigestAlgorithmIdentifier",
-+ hdr.payload, hdr.length);
- da_end = hdr.payload + hdr.length;
-
- if (asn1_get_oid(hdr.payload, hdr.length, &oid, &next)) {
-@@ -1992,6 +1995,23 @@ int x509_check_signature(struct x509_certificate *issuer,
- os_free(data);
- return -1;
- }
-+ wpa_hexdump(MSG_MSGDUMP, "X509: Digest algorithm parameters",
-+ next, da_end - next);
-+
-+ /*
-+ * RFC 5754: The correct encoding for the SHA2 algorithms would be to
-+ * omit the parameters, but there are implementation that encode these
-+ * as a NULL element. Allow these two cases and reject anything else.
-+ */
-+ if (da_end > next &&
-+ (asn1_get_next(next, da_end - next, &hdr) < 0 ||
-+ !asn1_is_null(&hdr) ||
-+ hdr.payload + hdr.length != da_end)) {
-+ wpa_printf(MSG_DEBUG,
-+ "X509: Unexpected digest algorithm parameters");
-+ os_free(data);
-+ return -1;
-+ }
-
- if (x509_sha1_oid(&oid)) {
- if (signature->oid.oid[6] != 5 /* sha-1WithRSAEncryption */) {
---
-cgit v0.12
-
diff --git a/net-wireless/hostapd/files/hostapd-conf.d b/net-wireless/hostapd/files/hostapd-conf.d
new file mode 100644
index 0000000..7d05735
--- /dev/null
+++ b/net-wireless/hostapd/files/hostapd-conf.d
@@ -0,0 +1,9 @@
+# Space separated List of interfaces which needs to be started before
+# hostapd
+INTERFACES="wlan0"
+
+# Space separated list of configuration files
+CONFIGS="/etc/hostapd/hostapd.conf"
+
+# Extra options to pass to hostapd, see hostapd(8)
+OPTIONS=""
diff --git a/net-wireless/hostapd/files/hostapd-init.d b/net-wireless/hostapd/files/hostapd-init.d
new file mode 100644
index 0000000..3c0fdc9
--- /dev/null
+++ b/net-wireless/hostapd/files/hostapd-init.d
@@ -0,0 +1,38 @@
+#!/sbin/openrc-run
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+pidfile="/run/${SVCNAME}.pid"
+command="/usr/sbin/hostapd"
+command_args="-P ${pidfile} -B ${OPTIONS} ${CONFIGS}"
+
+extra_started_commands="reload"
+
+depend() {
+ local myneeds=
+ for iface in ${INTERFACES}; do
+ myneeds="${myneeds} net.${iface}"
+ done
+
+ [ -n "${myneeds}" ] && need ${myneeds}
+ use logger
+}
+
+start_pre() {
+ local file
+
+ for file in ${CONFIGS}; do
+ if [ ! -r "${file}" ]; then
+ eerror "hostapd configuration file (${CONFIG}) not found"
+ return 1
+ fi
+ done
+}
+
+reload() {
+ start_pre || return 1
+
+ ebegin "Reloading ${SVCNAME} configuration"
+ kill -HUP $(cat ${pidfile}) > /dev/null 2>&1
+ eend $?
+}
diff --git a/net-wireless/hostapd/files/hostapd.service b/net-wireless/hostapd/files/hostapd.service
new file mode 100644
index 0000000..8f0ee8e
--- /dev/null
+++ b/net-wireless/hostapd/files/hostapd.service
@@ -0,0 +1,9 @@
+[Unit]
+Description=Hostapd IEEE 802.11 AP, IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator
+After=network.target
+
+[Service]
+ExecStart=/usr/sbin/hostapd /etc/hostapd/hostapd.conf
+
+[Install]
+WantedBy=multi-user.target
diff --git a/net-wireless/hostapd/hostapd-2.10-r3.ebuild b/net-wireless/hostapd/hostapd-2.10-r3.ebuild
new file mode 100644
index 0000000..2c60eed
--- /dev/null
+++ b/net-wireless/hostapd/hostapd-2.10-r3.ebuild
@@ -0,0 +1,266 @@
+# Copyright 1999-2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit flag-o-matic systemd savedconfig toolchain-funcs
+
+DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon"
+HOMEPAGE="https://w1.fi/ https://w1.fi/cgit/hostap/"
+S="${S}/${PN}"
+
+if [[ ${PV} == 9999 ]]; then
+ inherit git-r3
+ EGIT_REPO_URI="https://w1.fi/hostap.git"
+else
+ if [[ ${PV} =~ ^.*_p[0-9]{8}$ ]]; then
+ SRC_URI+=" https://dev.gentoo.org/~andrey_utkin/distfiles/${P}.tar.xz"
+ else
+ SRC_URI+=" https://w1.fi/releases/${P}.tar.gz"
+ fi
+
+ # Never stabilize snapshot ebuilds please
+ KEYWORDS="amd64 arm arm64 ~mips ppc x86"
+fi
+
+LICENSE="BSD"
+SLOT="0"
+IUSE="internal-tls ipv6 netlink selinux sqlite +suiteb +wps"
+
+DEPEND="
+ internal-tls? ( dev-libs/libtommath )
+ !internal-tls? ( dev-libs/openssl:0=[-bindist(-)] )
+ kernel_linux? (
+ net-wireless/wireless-regdb
+ >=dev-libs/libnl-3.2:3
+ )
+ netlink? ( net-libs/libnfnetlink )
+ sqlite? ( dev-db/sqlite:3 )
+"
+RDEPEND="
+ ${DEPEND}
+ selinux? ( sec-policy/selinux-hostapd )
+"
+BDEPEND="virtual/pkgconfig"
+
+PATCHES=( "${FILESDIR}"/${P}-libressl.patch )
+
+pkg_pretend() {
+ if use internal-tls; then
+ ewarn "internal-tls implementation is experimental and provides fewer features"
+ fi
+}
+
+src_unpack() {
+ # Override default one because we need the SRC_URI ones even in case of 9999 ebuilds
+ default
+
+ if [[ ${PV} == 9999 ]] ; then
+ git-r3_src_unpack
+ fi
+}
+
+src_prepare() {
+ # Allow users to apply patches to src/drivers for example,
+ # i.e. anything outside ${S}/${PN}
+ pushd ../ >/dev/null || die
+ default
+ popd >/dev/null || die
+
+ sed -i -e "s:/etc/hostapd:/etc/hostapd/hostapd:g" \
+ "${S}/hostapd.conf" || die
+}
+
+src_configure() {
+ local CONFIG="${S}"/.config
+
+ restore_config "${CONFIG}"
+ if [[ -f "${CONFIG}" ]]; then
+ default
+ return 0
+ fi
+
+ # toolchain setup
+ echo "CC = $(tc-getCC)" > "${CONFIG}" || die
+
+ # EAP authentication methods
+ echo "CONFIG_EAP=y" >> "${CONFIG}" || die
+ echo "CONFIG_ERP=y" >> "${CONFIG}" || die
+ echo "CONFIG_EAP_MD5=y" >> "${CONFIG}" || die
+
+ if use suiteb; then
+ echo "CONFIG_SUITEB=y" >> "${CONFIG}" || die
+ echo "CONFIG_SUITEB192=y" >> "${CONFIG}" || die
+ fi
+
+ if use internal-tls ; then
+ echo "CONFIG_TLS=internal" >> "${CONFIG}" || die
+ else
+ # SSL authentication methods
+ echo "CONFIG_DPP=y" >> "${CONFIG}" || die
+ echo "CONFIG_EAP_FAST=y" >> "${CONFIG}" || die
+ echo "CONFIG_EAP_MSCHAPV2=y" >> "${CONFIG}" || die
+ echo "CONFIG_EAP_PEAP=y" >> "${CONFIG}" || die
+ echo "CONFIG_EAP_PWD=y" >> "${CONFIG}" || die
+ echo "CONFIG_EAP_TLS=y" >> "${CONFIG}" || die
+ echo "CONFIG_EAP_TTLS=y" >> "${CONFIG}" || die
+ echo "CONFIG_OWE=y" >> "${CONFIG}" || die
+ echo "CONFIG_SAE=y" >> "${CONFIG}" || die
+ echo "CONFIG_TLSV11=y" >> "${CONFIG}" || die
+ echo "CONFIG_TLSV12=y" >> "${CONFIG}" || die
+ fi
+
+ if use wps; then
+ # Enable Wi-Fi Protected Setup
+ echo "CONFIG_WPS=y" >> "${CONFIG}" || die
+ echo "CONFIG_WPS2=y" >> "${CONFIG}" || die
+ echo "CONFIG_WPS_UPNP=y" >> "${CONFIG}" || die
+ echo "CONFIG_WPS_NFC=y" >> "${CONFIG}" || die
+ einfo "Enabling Wi-Fi Protected Setup support"
+ fi
+
+ echo "CONFIG_EAP_IKEV2=y" >> "${CONFIG}" || die
+ echo "CONFIG_EAP_TNC=y" >> "${CONFIG}" || die
+ echo "CONFIG_EAP_GTC=y" >> "${CONFIG}" || die
+ echo "CONFIG_EAP_SIM=y" >> "${CONFIG}" || die
+ echo "CONFIG_EAP_AKA=y" >> "${CONFIG}" || die
+ echo "CONFIG_EAP_AKA_PRIME=y" >> "${CONFIG}" || die
+ echo "CONFIG_EAP_EKE=y" >> "${CONFIG}" || die
+ echo "CONFIG_EAP_PAX=y" >> "${CONFIG}" || die
+ echo "CONFIG_EAP_PSK=y" >> "${CONFIG}" || die
+ echo "CONFIG_EAP_SAKE=y" >> "${CONFIG}" || die
+ echo "CONFIG_EAP_GPSK=y" >> "${CONFIG}" || die
+ echo "CONFIG_EAP_GPSK_SHA256=y" >> "${CONFIG}" || die
+
+ einfo "Enabling drivers: "
+
+ # drivers
+ echo "CONFIG_DRIVER_HOSTAP=y" >> "${CONFIG}" || die
+ einfo " HostAP driver enabled"
+ echo "CONFIG_DRIVER_WIRED=y" >> "${CONFIG}" || die
+ einfo " Wired driver enabled"
+ echo "CONFIG_DRIVER_NONE=y" >> "${CONFIG}" || die
+ einfo " None driver enabled"
+
+ einfo " nl80211 driver enabled"
+ echo "CONFIG_DRIVER_NL80211=y" >> "${CONFIG}" || die
+
+ # epoll
+ echo "CONFIG_ELOOP_EPOLL=y" >> "${CONFIG}" || die
+
+ # misc
+ echo "CONFIG_DEBUG_FILE=y" >> "${CONFIG}" || die
+ echo "CONFIG_PKCS12=y" >> "${CONFIG}" || die
+ echo "CONFIG_RADIUS_SERVER=y" >> "${CONFIG}" || die
+ echo "CONFIG_IAPP=y" >> "${CONFIG}" || die
+ echo "CONFIG_IEEE80211R=y" >> "${CONFIG}" || die
+ echo "CONFIG_IEEE80211W=y" >> "${CONFIG}" || die
+ echo "CONFIG_IEEE80211N=y" >> "${CONFIG}" || die
+ echo "CONFIG_IEEE80211AC=y" >> "${CONFIG}" || die
+ echo "CONFIG_IEEE80211AX=y" >> "${CONFIG}" || die
+ echo "CONFIG_OCV=y" >> "${CONFIG}" || die
+ echo "CONFIG_PEERKEY=y" >> "${CONFIG}" || die
+ echo "CONFIG_RSN_PREAUTH=y" >> "${CONFIG}" || die
+ echo "CONFIG_INTERWORKING=y" >> "${CONFIG}" || die
+ echo "CONFIG_FULL_DYNAMIC_VLAN=y" >> "${CONFIG}" || die
+ echo "CONFIG_HS20=y" >> "${CONFIG}" || die
+ echo "CONFIG_WNM=y" >> "${CONFIG}" || die
+ echo "CONFIG_FST=y" >> "${CONFIG}" || die
+ echo "CONFIG_FST_TEST=y" >> "${CONFIG}" || die
+ echo "CONFIG_ACS=y" >> "${CONFIG}" || die
+
+ if use netlink; then
+ # Netlink support
+ echo "CONFIG_VLAN_NETLINK=y" >> "${CONFIG}" || die
+ fi
+
+ if use ipv6; then
+ # IPv6 support
+ echo "CONFIG_IPV6=y" >> "${CONFIG}" || die
+ fi
+
+ if use sqlite; then
+ # Sqlite support
+ echo "CONFIG_SQLITE=y" >> "${CONFIG}" || die
+ fi
+
+ if use kernel_linux; then
+ echo "CONFIG_LIBNL32=y" >> "${CONFIG}" || die
+ append-cflags "$($(tc-getPKG_CONFIG) --cflags libnl-3.0)"
+ fi
+
+ # TODO: Add support for BSD drivers
+
+ default
+}
+
+src_compile() {
+ emake V=1
+
+ if ! use internal-tls; then
+ emake V=1 nt_password_hash
+ emake V=1 hlr_auc_gw
+ fi
+}
+
+src_install() {
+ insinto /etc/${PN}
+ doins ${PN}.{conf,accept,deny,eap_user,radius_clients,sim_db,wpa_psk}
+
+ fperms -R 600 /etc/${PN}
+
+ dosbin ${PN}
+ dobin ${PN}_cli
+
+ if ! use internal-tls; then
+ dobin nt_password_hash hlr_auc_gw
+ fi
+
+ newinitd "${FILESDIR}/${PN}-init.d" ${PN}
+ newconfd "${FILESDIR}/${PN}-conf.d" ${PN}
+ systemd_dounit "${FILESDIR}/${PN}.service"
+
+ doman ${PN}{.8,_cli.1}
+
+ dodoc ChangeLog README
+ use wps && dodoc README-WPS
+
+ docinto examples
+ dodoc wired.conf
+
+ insinto /etc/log.d/conf/services/
+ doins logwatch/${PN}.conf
+
+ exeinto /etc/log.d/scripts/services/
+ doexe logwatch/${PN}
+
+ save_config .config
+}
+
+pkg_postinst() {
+ einfo
+ einfo "If you are running OpenRC you need to follow this instructions:"
+ einfo "In order to use ${PN} you need to set up your wireless card"
+ einfo "for master mode in /etc/conf.d/net and then start"
+ einfo "/etc/init.d/${PN}."
+ einfo
+ einfo "Example configuration:"
+ einfo
+ einfo "config_wlan0=( \"192.168.1.1/24\" )"
+ einfo "channel_wlan0=\"6\""
+ einfo "essid_wlan0=\"test\""
+ einfo "mode_wlan0=\"master\""
+ einfo
+
+ #if [[ -e "${KV_DIR}"/net/mac80211 ]]; then
+ # einfo "This package now compiles against the headers installed by"
+ # einfo "the kernel source for the mac80211 driver. You should "
+ # einfo "re-emerge ${PN} after upgrading your kernel source."
+ #fi
+
+ if use wps; then
+ einfo "You have enabled Wi-Fi Protected Setup support, please"
+ einfo "read the README-WPS file in /usr/share/doc/${PF}"
+ einfo "for info on how to use WPS"
+ fi
+}
next reply other threads:[~2023-11-14 17:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-14 17:45 orbea [this message]
-- strict thread matches above, loose matches on Subject: below --
2025-02-26 2:08 [gentoo-commits] repo/proj/libressl:master commit in: net-wireless/hostapd/, net-wireless/hostapd/files/ orbea
2022-07-10 22:52 Quentin Retornaz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1699982022.1a7188dde1875d965e5354e4e93d341cfde0b939.orbea@gentoo \
--to=orbea@riseup.net \
--cc=gentoo-commits@lists.gentoo.org \
--cc=gentoo-dev@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox